MITEL-BCM-MIB
The MITEL Broadcom Switch MIB module. This MIB module is defined to specifically provide additional statistical information for the Broadcom Switch subsystem.
Main OID:
mitelBCM.1.3.6.1.4.1.1027.4.2.1
20
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
mitelBCMThe MITEL Broadcom Switch MIB module. This MIB module is defined to specifically provide additional statistical information for the Broadcom Switch subsystem. MODULE-IDENTITY .1.3.6.1.4.1.1027.4.2.1 |
mitelBCMObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.2.1.1 |
mitelBCMPortTableTable defining statistical information about each port of a Broadcom Switch sub-system. SEQUENCE OF MitelBCMPortTableEntry .1.3.6.1.4.1.1027.4.2.1.1.1 |
mitelBCMPortTableEntryA row defining a single BCM Port table entry. MitelBCMPortTableEntry .1.3.6.1.4.1.1027.4.2.1.1.1.1 |
mitelBCMPortIndexThe interface identifier for this switch port. Usually corresponds to ifIndex in the ifTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1027.4.2.1.1.1.1.1 |
mitelBCMPortRxSAChangesThe number of times the source address (SA) of good received packets has changed. A count greater than one generally indicates the port is connected to a repeater based network.ro Counter32 .1.3.6.1.4.1.1027.4.2.1.1.1.1.2 |
mitelBCMPortRxLastSAThe last received source address on this port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1027.4.2.1.1.1.1.3 |
mitelBCMChipCountThe number of BCM ethernet chips in the system.ro Integer32 .1.3.6.1.4.1.1027.4.2.1.1.2 |
mitelBCMChipTableTable defining characteristic information about each Broadcom Switch chip in the system. SEQUENCE OF MitelBCMChipTableEntry .1.3.6.1.4.1.1027.4.2.1.1.3 |
mitelBCMChipTableEntryA row defining a single Broadcom (BCM) Chip table entry. MitelBCMChipTableEntry .1.3.6.1.4.1.1027.4.2.1.1.3.1 |
mitelBCMChipIndexThe identifier for this switch chip.ro Integer32 .1.3.6.1.4.1.1027.4.2.1.1.3.1.1 |
mitelBCMChipBISTThe status of the BCM ethernet chip built-in-self-test (BIST). BCRAM(0) bit 2^0 - Buffer control RAM (only in BCM5380M) IPDBM(1) bit 2^1 - Internal packet data buffer memory MRAM(2) bit 2^2 - MIB RAM (only in BCM5380M) GMRAM(3) bit 2^3 - Gigabit MIB RAM (only in BCM5380M) If the bit is set, then that sub-system has failed.ro Bits .1.3.6.1.4.1.1027.4.2.1.1.3.1.2 |
mitelBCMChipRevThe BCM ethernet chip revision ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1027.4.2.1.1.3.1.3 |
mitelBCMChipTypeThe BCM ethernet chip type.ro Enumeration .1.3.6.1.4.1.1027.4.2.1.1.3.1.4 |
mitelBCMConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.2.1.2 |
mitelBCMCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.2.1.2.1 |
mitelBCMSwitchComplianceThe compliance statement for mitel nodes that include a BCM switch sub-system. Unknown .1.3.6.1.4.1.1027.4.2.1.2.1.1 |
mitelBCMGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1027.4.2.1.2.2 |
mitelBCMPortGroupA collection of objects that provide statistical infrormation about BCM switch ports. Unknown .1.3.6.1.4.1.1027.4.2.1.2.2.1 |
mitelBCMChipGroupA collection of objects that provide infrormation about BCM switch Chips. Unknown .1.3.6.1.4.1.1027.4.2.1.2.2.2 |