MERITAGE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MERITAGE-MIB.
43
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
meritage OBJECT IDENTIFIER .1.3.6.1.4.1.81.32 |
RFC1213-MIB Unknown .1.3.6.1.4.1.81.32 |
meritageBase OBJECT IDENTIFIER .1.3.6.1.4.1.81.32.1 |
meritageBaseLEDsSummary of the hub LEDs. The coding of each LED is defined in
meritageLedColour
Number of bits per LED, currently 8 (1st byte)
Number of LEDs, currently 8 (2nd byte)
PS1 LED (3rd byte)
PS2 LED
PS3 LED
Fan1 LED
Fan2 LED
MSPV1 LED
MSPV2 LED
Eth Sideband LED (last byte)ro OCTET STRING .1.3.6.1.4.1.81.32.1.1 |
meritageBaseTemperatureExceedFault condition indicating that the temperature exceeded
70 degrees in at least one of the modules in the hub.ro Enumeration .1.3.6.1.4.1.81.32.1.2 |
meritageBaseXswitchConfigurationThe value of this attribute shows whether the two horizontal
Xswitches are connected internally to form a single
14-slots-wide Xswitch in the Meritage, or not.ro Enumeration .1.3.6.1.4.1.81.32.1.3 |
meritageBaseFaultMaskEach bit of this item describes a fault situation in the Meritage hub.
bit 1: meritageBaseFanActivityStatus.1 = failed (2),
bit 2: meritageBaseFanActivityStatus.2 = failed (2),
bit 3: meritageBasePSUActivityStatus.1 = failed(2),
bit 4: meritageBasePSUActivityStatus.2 = failed(2),
bit 5: meritageBasePSUActivityStatus.3 = failed(2),
bit 6: meritageMSPVBackupStatus = failed(2),
bit 7: scGenSwitchOldVersionModules.1 = null,
bit 8: scGenSwitchOldVersionModules.2 = null,
bit 9: scGenSwitchVIDPNonSupportedModules.1 = null,
bit 10: scGenSwitchVIDPNonSupportedModules.2 = null,
bit 11: scGenSwitchSTAonSupportedModules.1 = null,
bit 12: scGenSwitchSTAonSupportedModules.2 = null,
bit 13: scGenSwitchIDSonSupportedModules.1 = null,
bit 14: scGenSwitchIDSonSupportedModules.2 = null,
bit 15: The highest priority source port is not the curent
source (according to meritageClockCurrentSource),
bit 16: meritageClockStatus is Not in locked (1) for more then
120 seconds AND not all priorities are 0 AND
meritageClockAdminStatus = enable (1),
bit 17: meritageClockSourceStatus.1 = failed (2),
bit 18: meritageClockSourceStatus.2 = failed (2),
bit 19: meritageClockSourceStatus.3 = failed (2),
bit 20: meritageClockSourceStatus.4 = failed (2),ro OCTET STRING .1.3.6.1.4.1.81.32.1.4 |
meritageBaseFanTableTable of attributes for Fan units in the Meritage. SEQUENCE OF MeritageBaseFanEntry .1.3.6.1.4.1.81.32.1.5 |
meritageBaseFanEntryAn entry in the table, containing attributes for a single Fan unit
in the Meritage. MeritageBaseFanEntry .1.3.6.1.4.1.81.32.1.5.1 |
meritageBaseFanIdFan index for identifying the Fan in the Meritage
1-left, 2-right.ro INTEGER .1.3.6.1.4.1.81.32.1.5.1.1 |
meritageBaseFanActivityStatusThis attribute defines the status of the Fan.ro Enumeration .1.3.6.1.4.1.81.32.1.5.1.2 |
meritageBasePSUTableTable of configuration attributes for the Power Supply Units. SEQUENCE OF MeritageBasePSUEntry .1.3.6.1.4.1.81.32.1.6 |
meritageBasePSUEntryAn entry in the table, containing information for a single
Power Supply Unit. MeritageBasePSUEntry .1.3.6.1.4.1.81.32.1.6.1 |
meritageBasePSUIdIndex identifying the PSU.1-left, 2-middle, 3-right.ro INTEGER .1.3.6.1.4.1.81.32.1.6.1.1 |
meritageBasePSUTypeThis attribute indicates the PSU type.ro Enumeration .1.3.6.1.4.1.81.32.1.6.1.2 |
meritageBasePSUHWVersionHardware version of the PSU. Stored in ASCII format :
first Byte - hardware major version number
Second Byte - hardware minor version number (Configuration Symbol)
last Byte - hardware debug version number.ro DisplayString .1.3.6.1.4.1.81.32.1.6.1.3 |
meritageBasePSURatedPowerThis attribute indicates the rated power of the PSU in Watts.ro INTEGER .1.3.6.1.4.1.81.32.1.6.1.4 |
meritageBasePSUActivityStatusThis attribute defines the status of the PSU:
active(1) - indicates that the PSU supplies power to the chassis.
failed(2) - indicates PSU failure
none(3) - indicates absence of PSU from the configuration.ro Enumeration .1.3.6.1.4.1.81.32.1.6.1.5 |
meritageBaseUpBckplnConfigurationDefines whether the Upper Backplane is constructed
as a single domain (full), as a dual domain (split) or not installed.
The hardware supports 2 bits for this purpose (A10, B10 MSB).
single - 10 in the MSB HW registers
dual - 01 in the MSB HW registers
notInstalled - 11 in the MSB HW registersro Enumeration .1.3.6.1.4.1.81.32.1.7 |
meritageBaseUpBckplnConfigurationSymbolDefines the Configuration Symbol of the Upper Backplane
X.Y - where X & Y are integers:
1st byte (X) - Major version number
2nd byte - '.'
3rd byte (Y) - minor version number
The hardware supports 2 bits for this purpose (D10, E10 LSB).
Y will always be 0.
X will change according to the HW registers.
00 is CS 1.0, 01 is 2.0, 10 is 3.0, 11 is 4.0.
If no upper backplane is installed in the chassis, an empty string
will be returned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.81.32.1.8 |
meritageMSPV OBJECT IDENTIFIER .1.3.6.1.4.1.81.32.2 |
meritageMSPVBackupStatusThis attribute defines the status of the backup M-SPV module
in the Meritage:
dormant (1) - indicates that the backup M-SPV is dormant and works ok.
failed (2) - indicates that the backup M-SPV has failed.
none (3) - indicates absence of the backup M-SPV from the hub.ro Enumeration .1.3.6.1.4.1.81.32.2.1 |
meritageMSPVMainPositionThis attribute defines the position of the main M-SPV module
in the Meritage:
MSPV1 (1) - indicates that the main M-SPV is the one on the left slot
MSPV2 (2) - indicates that the main M-SPV is the one on the right slot.ro Enumeration .1.3.6.1.4.1.81.32.2.2 |
meritageGroup OBJECT IDENTIFIER .1.3.6.1.4.1.81.32.3 |
meritageGroupTableA table containing information about each group in the hub. SEQUENCE OF MeritageGroupEntry .1.3.6.1.4.1.81.32.3.1 |
meritageGroupEntryAn entry containing information about a particular
group in the hub. MeritageGroupEntry .1.3.6.1.4.1.81.32.3.1.1 |
meritageGroupIndexIndex into this table, by group number.ro INTEGER .1.3.6.1.4.1.81.32.3.1.1.1 |
meritageGroupTempExceedFault condition indicating that temperature exceeded the threshold
on the module.ro Enumeration .1.3.6.1.4.1.81.32.3.1.1.2 |
meritageGroupLEDsMapThe status of all the Group LEDs in the form of a BIT Map.
The coding of each LED is defined in MeritageLedColour.
The structure of this item:
Number of bits per LED = A (currently 8 bits) (1st byte)
Number of Module level LEDs = B (currently 2) (2nd byte)
Number of Ports = C (currently 12) (3rd byte)
Number of Functions = D (currently 6) (4th byte)
Module level LEDs (=B bytes)
Ports LEDs for function #1 (=C bytes)
Ports LEDs for function #2 (=C bytes)
Ports LEDs for function #3 (=C bytes)
...
Ports LEDs for function #D (=C bytes)
The length of this item, with the current values, is 78 bytes.ro OCTET STRING .1.3.6.1.4.1.81.32.3.1.1.3 |
meritageClock OBJECT IDENTIFIER .1.3.6.1.4.1.81.32.4 |
meritageClockAdminStatusenable or disable the clock sync daughter board.
When disabled, the M-SPS will use its own internal clock.rw Enumeration .1.3.6.1.4.1.81.32.4.1 |
meritageClockResetSetting the value of this attribute to ON causes a reset only to the
Clock Sync daughter board and not to the M-SPS.rw Enumeration .1.3.6.1.4.1.81.32.4.2 |
meritageClockWTRThe value in seconds of Wait Time to Restore.
The time the M-SPS software will wait before restoring a healthy higher
priority timing source as the sync source.
This is to prevent toggling between two sources if one source is
intermittently bad.
If the WTR is set to infinity, a higher priority source will be active
only if the current source fails or after reset.
ranges 10-3600 seconds
value = 9999 means infinity.
default value - 20 sec.rw INTEGER .1.3.6.1.4.1.81.32.4.3 |
meritageClockStatusThe status of the Clock Sync daughter board:
Locked - locked to the input timing source for more then 8 seconds.
Holdover - Trying to simulate a clock it was previously locked to.
FreeRunning - Outputting a timing source derived from none of the sources.
Internal - Outputting the internal clock, because the clock sync is
disabled.ro Enumeration .1.3.6.1.4.1.81.32.4.4 |
meritageClockCurrentSourceThe current clock source being used. This is the outcome of the
status of the sources and the priority between the sources.
possible values are:
ATM A, ATM B, SYNC A, SYNC B, none (when there is no source,
i.e. in Holdover, Free Running or Internal).
A Trap will be sent on change.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.81.32.4.5 |
meritageClockSource OBJECT IDENTIFIER .1.3.6.1.4.1.81.32.5 |
meritageClockSourceTableA table containing information about each clock source in the hub. SEQUENCE OF MeritageClockSourceEntry .1.3.6.1.4.1.81.32.5.1 |
meritageClockSourceEntryAn entry containing information about a particular clock source
in the hub. MeritageClockSourceEntry .1.3.6.1.4.1.81.32.5.1.1 |
meritageClockSourceIndexIndex into this table, by clock source number 1-4.
1 - ATM A
2 - ATM B
3 - SYNC A
4 - SYNC Bro INTEGER .1.3.6.1.4.1.81.32.5.1.1.1 |
meritageClockSourceStatusThe status of the source port
ok - link ok
los - loss of signal.
failed - the source may have a link, but the M-SPS has failed 4 times
to lock to it. The source will automatically be disabled
(priority 0).
The status can exit the failed status only if the user enables
the source by raising it's priority.ro Enumeration .1.3.6.1.4.1.81.32.5.1.1.2 |
meritageClockSourcePriorityThe priority of the source port
0 - disabled
1 - lowest
4 - highestrw INTEGER .1.3.6.1.4.1.81.32.5.1.1.3 |
meritageClockSourceConfigPortThe port assigned to drive the Clock Source.
In the format X.Y - where X & Y are integers:
1st byte (X) - Slot number
2nd byte - (.)
3rd byte (Y) - Port number
The NMS can write values to index 1 and 2 only. Attempt to write a value
to index 3 and 4 will cause genError.
The NMS can read the value to see that the set was successful.
For index 1 - for example = 3.1
For index 2 - for example = 3.2
For index 3 - value always = 15.1
For index 4 - value always = 15.2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.81.32.5.1.1.4 |
meritageClockSourceFramingThe framing mode for the SYNC A SYNC B ports.
Sources ATM A and ATM will reply with notSupported (255).
For M-SPS/ER and EB, the values 1 and 2 are relevant.
For M-SPS/T, the values 3 and 4 are relevant.rw Enumeration .1.3.6.1.4.1.81.32.5.1.1.5 |