MARVELL-UDLD-MIB
AI MIB Summary
The MARVELL-UDLD-MIB enables monitoring of UniDirectional Link Detection protocol states and error counters on Marvell-based network hardware to detect and isolate unidirectional fiber or copper link failures.
This private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol).
Main OID:
rlUdld.1.3.6.1.4.1.89.218
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
rlUdldThis private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol). MODULE-IDENTITY .1.3.6.1.4.1.89.218 |
rlUdldPortTableThe table holds information for Udld Ethernet ports. SEQUENCE OF RlUdldPortEntry .1.3.6.1.4.1.89.218.1 |
rlUdldPortEntryEntry in the rlUdldPortTable. RlUdldPortEntry .1.3.6.1.4.1.89.218.1.1 |
rlUdldPortIfIndexInterface Index. This variable is the key for udld port table.
uniquely identifies the udld port information. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.218.1.1.1 |
rlUdldPortAdminModeThis variable identifies port UDLD admin configured mode (normal, aggressive, disable).rw UdldPortMode .1.3.6.1.4.1.89.218.1.1.2 |
rlUdldPortOperModeThis variable identifies port UDLD operational mode (normal, aggressive, disable).
for fiber ports it is combination of global mode and port modero UdldPortMode .1.3.6.1.4.1.89.218.1.1.3 |
rlUdldPortDefaultConfigurationThis variable indicates whether tne user configure the udld port. to present (default) or not in port configuration.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.218.1.1.4 |
rlUdldBidirectionalStateThis variable identifies the port UDLD status (shutdown, idle, detection, undetermined, bidirectional).ro UdldPortBidirectionalState .1.3.6.1.4.1.89.218.1.1.5 |
rlUdldNumberOfDetectedNeighborsNumber Of Detected Neighbors for this port.ro INTEGER .1.3.6.1.4.1.89.218.1.1.6 |
rlUdldNeighborTableThe table holds information for Udld Neighbor of ethernet ports. SEQUENCE OF RlUdldNeighborEntry .1.3.6.1.4.1.89.218.2 |
rlUdldNeighborEntryEntry in the rlUdldNeighborTable. RlUdldNeighborEntry .1.3.6.1.4.1.89.218.2.1 |
rlUdldNeighborPortIfIndexInterface Index. This variable is the key for udld port Neighbor table.
uniquely identifies the udld port index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.218.2.1.1 |
rlUdldNeighborDeviceIDThe Neighbor Device-ID TLV should contain the switch base MAC address in ACSII format. UdldString .1.3.6.1.4.1.89.218.2.1.2 |
rlUdldNeighborPortIDThe Port-ID TLV should contain the port ACSII name as it is printed in show CLI commands. UdldString .1.3.6.1.4.1.89.218.2.1.3 |
rlUdldNeighborDeviceMACAddressThe Neighbor mac address MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.218.2.1.4 |
rlUdldNeighborDeviceNameThe Neighbor NeighborDevice Name TLV should contain sysName in ACSII.ro UdldString .1.3.6.1.4.1.89.218.2.1.5 |
rlUdldNeighborMessageTimeThe Neighbor Message Time is from Message Interval TLV.
This time interval value used by a neighbor to send UDLD probes
after the linkup or detection phases. Its time unit is 1 second.ro INTEGER .1.3.6.1.4.1.89.218.2.1.6 |
rlUdldNeighborLeftLifeTimeThe remaining holdtime for Neighbor entry in cache in seconds.ro INTEGER .1.3.6.1.4.1.89.218.2.1.7 |
rlUdldNeighborCurrentStateThis variable identifies the Neighbor port UDLD current status (Disabled, Enabled, Undefined, Bidirectional).ro UdldNeighborCurrentState .1.3.6.1.4.1.89.218.2.1.8 |
rlUdldGlobalUDLDModeDefine Global UDLD Mode (normal, aggressive, disable)rw UdldGlobalMode .1.3.6.1.4.1.89.218.3 |
rlUdldGlobalMessageTimeDefine global value of the interval between two sent probe messages, use the udld
message time command in Global Configuration mode.rw INTEGER .1.3.6.1.4.1.89.218.4 |