MARVELL-ROUTEMAP-MIB
The MARVELL-ROUTEMAP-MIB provides vendor-specific SNMP access to monitor and configure route map policies on Marvell networking hardware, enabling the inspection of policy match criteria, action definitions, and distribution status for traffic steering. This module facilitates granular control over routing protocol behaviors, such as BGP or OSPF, by exposing the state and counters associated with specific route map entries applied to interfaces or protocol processes.
Imported Objects
Objects
12 total| Object Name |
|---|
rlRouteMapThe private MIB module definition for Route Map distribution mechanism. MODULE-IDENTITY .1.3.6.1.4.1.89.227 |
IF-MIBThe private MIB module definition for Route Map distribution mechanism. Unknown .1.3.6.1.4.1.89.227 |
rlRouteMapPbrTableMain table serving as container for route map table definition. SEQUENCE OF RlRouteMapPbrEntry .1.3.6.1.4.1.89.227.1 |
rlRouteMapPbrEntryThe row definition for this table. RlRouteMapPbrEntry .1.3.6.1.4.1.89.227.1.1 |
rlRouteMapPbrRouteMapNameName (identifier) of the route map. DisplayString .1.3.6.1.4.1.89.227.1.1.1 |
rlRouteMapPbrRouteMapSectionIdIdentifier of single section the route map. Unsigned32 .1.3.6.1.4.1.89.227.1.1.2 |
rlRouteMapPbrInetTypeInet type of this route-map.rw RlRouteMapInetType .1.3.6.1.4.1.89.227.1.1.3 |
rlRouteMapPbrMatchAccessListNameIdentifier of access list, if used for matching.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.227.1.1.4 |
rlRouteMapPbrActionNexthopInetAddressTypeThe inet type of rlRouteMapPbrActionNexthopInetAddressrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.227.1.1.5 |
rlRouteMapPbrActionNexthopInetAddressInet address of nexthop, if used for action.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.227.1.1.6 |
rlRouteMapPbrActionNexthopIfIndexInet address of nexthop, if used for action.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.89.227.1.1.7 |
rlRouteMapPbrRowStatusThe row status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.227.1.1.8 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.