MARVELL-POE-MIB
AI MIB Summary
The MARVELL-POE-MIB enables monitoring and management of Power over Ethernet (PoE) allocation limits on Marvell-based network switches, specifically exposing the `Max power allocation allowed` metric to enforce per-port or aggregate power budgets. This module facilitates granular control over PoE power distribution to prevent over-subscription and ensure compliance with IEEE 802.3af/at/bt standards on Marvell hardware.
Add a new field in the PoE MIB to indicate Max power allocation allowed
Main OID:
rlPoe.1.3.6.1.4.1.89.108
48
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
rlPoeAdd a new field in the PoE MIB to indicate Max power allocation allowed MODULE-IDENTITY .1.3.6.1.4.1.89.108 |
IF-MIBAdd a new field in the PoE MIB to indicate Max power allocation allowed Unknown .1.3.6.1.4.1.89.108 |
rlPethPsePortTableThe table listing additional information for Power Over Ethernet ports. SEQUENCE OF RlPethPsePortEntry .1.3.6.1.4.1.89.108.1 |
rlPethPsePortEntryAn entry in the rlPethPsePortTable. RlPethPsePortEntry .1.3.6.1.4.1.89.108.1.1 |
rlPethPsePortGroupIndexThis variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermore, the same value MUST be used in this variable,
pethMainPseGroupIndex, and pethNotificationControlGroupIndex
to refer to a given box in a stack or module in the rack. INTEGER .1.3.6.1.4.1.89.108.1.1.1 |
rlPethPsePortIndexThis variable uniquely identifies the power Ethernet PSE
port within group pethPsePortGroupIndex to which the
power Ethernet PSE entry is connected. INTEGER .1.3.6.1.4.1.89.108.1.1.2 |
rlPethPsePortOutputVoltageThis variable indicates on the output voltage level in milli volts from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.89.108.1.1.3 |
rlPethPsePortOutputCurrentThis variable indicates on the output current level in milli amper from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.89.108.1.1.4 |
rlPethPsePortOutputPowerThis variable indicates on the output power level in milli watts from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.89.108.1.1.5 |
rlPethPsePortPowerLimitThis variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex.rw INTEGER .1.3.6.1.4.1.89.108.1.1.6 |
rlPethPsePortStatusThis variable indicates on the hardware status of rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.89.108.1.1.7 |
rlPethPsePortStatusDescriptionThis variable indicates the description of the hardware status of rlPethPsePortIndex.ro DisplayString .1.3.6.1.4.1.89.108.1.1.8 |
rlPethPsePortOperPowerLimitThis variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.89.108.1.1.9 |
rlPethPsePortTimeRangeNameThis variable is used to bind PoE port to time range.rw DisplayString .1.3.6.1.4.1.89.108.1.1.10 |
rlPethPsePortOperStatusThis Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.108.1.1.11 |
rlPethPsePortMaxPowerAllocAllowedThis variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex.ro INTEGER .1.3.6.1.4.1.89.108.1.1.12 |
rlPethPsePortSupportPoeTypeThis variable indicates the supported type of the PoE portro RlPoeType .1.3.6.1.4.1.89.108.1.1.13 |
rlPethPsePortLinkPartnerPoeTypeThis variable indicates the link partner PoE type.ro RlPoeType .1.3.6.1.4.1.89.108.1.1.14 |
rlPethPsePortFourPairForcedThis variable enabled the spare pair ALT_B in 60W port to force 4 pair enable.rw Enumeration .1.3.6.1.4.1.89.108.1.1.15 |
rlPethPsePortFourPairEnabledThis variable indicates that spare pair ALT_B is enable.ro Enumeration .1.3.6.1.4.1.89.108.1.1.16 |
rlPethPsePortNegotiationAllocatedPowerThis variable indicates the power allocation in milli watts from power negotiationro INTEGER .1.3.6.1.4.1.89.108.1.1.17 |
rlPethPsePortNegotiationProtocolOwnerThis variable indicates the protocol owner on power management negotiation protocolro Enumeration .1.3.6.1.4.1.89.108.1.1.18 |
rlPethMainPseTableThe table listing additional read - only information for Power Over Ethernet. SEQUENCE OF RlPethMainPseEntry .1.3.6.1.4.1.89.108.2 |
rlPethMainPseEntryAn entry in the rlPethMainPseTable. RlPethMainPseEntry .1.3.6.1.4.1.89.108.2.1 |
rlPethMainPseGroupIndexThis variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermore, the same value MUST be used in this variable,
pethMainPseGroupIndex, and pethNotificationControlGroupIndex
to refer to a given box in a stack or module in the rack. INTEGER .1.3.6.1.4.1.89.108.2.1.1 |
rlPethMainPseSwVersionThis variable identifies the MCU SW version.ro DisplayString .1.3.6.1.4.1.89.108.2.1.2 |
rlPethMainPseHwVersionThis variable identifies the MCU HW version.ro DisplayString .1.3.6.1.4.1.89.108.2.1.3 |
rlPethMainPseHwTypeThis variable identifies the MCU HW type (enhanced, plus, none).ro Enumeration .1.3.6.1.4.1.89.108.2.1.4 |
rlPethMainPsePowerGuardBandThis variable identifies the guard band in [W] for not connecting
additional ports.ro INTEGER .1.3.6.1.4.1.89.108.2.1.5 |
rlPethPowerPseTableThe table listing additional read-write information for Power Over Ethernet - PSE side. SEQUENCE OF RlPethPowerPseEntry .1.3.6.1.4.1.89.108.3 |
rlPethPowerPseEntryAn entry in the rlPethPowerPseTable. RlPethPowerPseEntry .1.3.6.1.4.1.89.108.3.1 |
rlPethPowerPseGroupIndexThis variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermore, the same value MUST be used in this variable,
PethPowerPseGroupIndex, and pethNotificationControlGroupIndex
to refer to a given box in a stack or module in the rack. INTEGER .1.3.6.1.4.1.89.108.3.1.1 |
rlPethPowerPsePowerThis variable identifies the maximum power in [W] supplied by PSE.rw Enumeration .1.3.6.1.4.1.89.108.3.1.2 |
rlPethPowerPseRpsPowerThis variable identifies the maximum power in [W] supplied by PSE + RPS.rw Enumeration .1.3.6.1.4.1.89.108.3.1.3 |
rlPethPowerPsePowerManagementModeThis variable identifies power management mode.rw Enumeration .1.3.6.1.4.1.89.108.3.1.4 |
rlPethPowerPsedisconnectMethodThis variable identifies disconnect method.rw Enumeration .1.3.6.1.4.1.89.108.3.1.5 |
rlPethPowerPseTemperatureSensorThis variable identifies the pd temperature sensor.ro INTEGER (-200..200) .1.3.6.1.4.1.89.108.3.1.6 |
rlPethPowerPseInrushTestEnabledThis variable identifies if HW inrush test will be disabled.
by default HW inrush test is enabled.rw Enumeration .1.3.6.1.4.1.89.108.3.1.7 |
rlPethPowerPseLegacyDisabledThis variable identifies poe Legacy global configuration moderw Enumeration .1.3.6.1.4.1.89.108.3.1.8 |
rlPethPdPortTableThe table listing additional read-write information for Power Over Ethernet - PD side. SEQUENCE OF RlPethPdPortEntry .1.3.6.1.4.1.89.108.4 |
rlPethPdPortEntryAn entry in the rlPethPdPortTable. RlPethPdPortEntry .1.3.6.1.4.1.89.108.4.1 |
rlPethPdPortIndexThis variable uniquely identifies the power Ethernet PD
port within group rlPethPdPortGroupIndex to which the
power Ethernet PSE entry is connected. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.108.4.1.1 |
rlPethPdPortSupportPoeTypeThis variable indicates the PoE type of the PD port (AF/AT/60W)ro RlPoeType .1.3.6.1.4.1.89.108.4.1.2 |
rlPethPdPortOperPoeTypeThis variable indicates the operational PoE status of the PD portro RlPoeType .1.3.6.1.4.1.89.108.4.1.3 |
rlPethPdPortPowerRequestThis variable indicates the requested power the PD port request from the PSE in mili-Wattsro Unsigned32 .1.3.6.1.4.1.89.108.4.1.4 |
rlPethPdPortPowerAvailableThis variable indicates the available power the PSE port offers to the PD port in mili-Wattsro Unsigned32 .1.3.6.1.4.1.89.108.4.1.5 |
rlPethPdPortForcedModeThis variable indicates the powered PD port forced moderw RlPoeType .1.3.6.1.4.1.89.108.4.1.6 |
rlPethPdPortNegotiationProtocolOwnerThis variable indicates the protocol owner on power management negotiation protocolro Enumeration .1.3.6.1.4.1.89.108.4.1.7 |