LUM-IFOTNMON-MIB
AI MIB Summary
The LUM-IFOTNMON-MIB module enables the monitoring and configuration of Optical Transport Network (OTN) performance metrics, specifically Section Monitoring (SM), Tandem Connection Monitoring (TCM), Path Monitoring (PM), and trace identifiers defined in ITU-T G.709. This module facilitates the retrieval of critical fault and performance data, including error counts, signal degradation indicators, and layer-specific timestamps, for OTN equipment compliant with G.709, G.798, and G.806 standards.
The MIB module for management of OTN monitor objects (SM, TCM, PM and trace objects).
This module describes the SM, TCM and PM in ITU-T Recommendation G.709.
The references refers to the following: G.709/Y.1331 (03/2003) G.798 (06/2004) G.806 (03/2006)
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps and tables sizes.
(2) The sm group contains information and configuration for the SM section objects.
(3) The tandem connection monitoring (tcm) group contains information and configuration for the Tcm layer objects.
(4) The path monitoring (pm) group contains information and configu- ration for the Pm layer objects.
(5) The trace group contains information and configuration for the trace objects defined in G.709.
Main OID:
lumIfOtnMonMIBModule.1.3.6.1.4.1.8708.1.1.55
93
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
93 total| Object Name |
|---|
lumIfOtnMonMIBModuleThe MIB module for management of OTN monitor objects (SM, TCM, PM
and trace objects).
This module describes the SM, TCM and PM in ITU-T Recommendation
G.709.
The references refers to the following:
G.709/Y.1331 (03/2003)
G.798 (06/2004)
G.806 (03/2006)
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The sm group contains information and configuration for the SM
section objects.
(3) The tandem connection monitoring (tcm) group contains information
and configuration for the Tcm layer objects.
(4) The path monitoring (pm) group contains information and configu-
ration for the Pm layer objects.
(5) The trace group contains information and configuration for the
trace objects defined in G.709. MODULE-IDENTITY .1.3.6.1.4.1.8708.1.1.55 |
lumIfOtnMonConfs OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.1 |
lumIfOtnMonGroups OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.1.1 |
lumIfOtnMonCompl OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.1.2 |
lumIfOtnMonMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.2 |
ifOtnMonGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.2.1 |
ifOtnMonGeneralConfigLastChangeTimeThe time when the configuration of the MIB was
last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.1 |
ifOtnMonGeneralStateLastChangeTimeThe time when the state of the MIB was last
changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.2 |
ifOtnMonGeneralIfOtnMonSmTableSizeSize of SM table.ro Unsigned32 .1.3.6.1.4.1.8708.2.55.2.1.3 |
ifOtnMonGeneralIfOtnMonSmConfigLastChangeTimeThe time when the configuration of the table was
last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.4 |
ifOtnMonGeneralIfOtnMonSmStateLastChangeTimeThe time when the state and/or configuration of the
table was last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.5 |
ifOtnMonGeneralIfOtnMonTcmTableSizeSize of otn tcm tablero Unsigned32 .1.3.6.1.4.1.8708.2.55.2.1.6 |
ifOtnMonGeneralIfOtnMonTcmConfigLastChangeTimeThe time when the configuration of the table was
last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.7 |
ifOtnMonGeneralIfOtnMonTcmStateLastChangeTimeThe time when the state and/or configuration of the
table was last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.8 |
ifOtnMonGeneralIfOtnMonPmTableSizeSize of otn pm tablero Unsigned32 .1.3.6.1.4.1.8708.2.55.2.1.9 |
ifOtnMonGeneralIfOtnMonPmConfigLastChangeTimeThe time when the configuration of the table was
last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.10 |
ifOtnMonGeneralIfOtnMonPmStateLastChangeTimeThe time when the state and/or configuration of the
table was last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.11 |
ifOtnMonGeneralIfOtnMonTraceTableSizeSize of otn trace tablero Unsigned32 .1.3.6.1.4.1.8708.2.55.2.1.12 |
ifOtnMonGeneralIfOtnMonTraceConfigLastChangeTimeThe time when the configuration of the table was
last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.13 |
ifOtnMonGeneralIfOtnMonTraceStateLastChangeTimeThe time when the state and/or configuration of the table
was last changed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8708.2.55.2.1.14 |
ifOtnMonSmList OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.2.2 |
ifOtnMonSmTableThe SM group contains information and configuration for
the SM section objects. SEQUENCE OF IfOtnMonSmEntry .1.3.6.1.4.1.8708.2.55.2.2.1 |
ifOtnMonSmEntryAn entry in the ifOtnMon SM list. IfOtnMonSmEntry .1.3.6.1.4.1.8708.2.55.2.2.1.1 |
ifOtnMonSmIndexAn index assigned to each entry.ro Unsigned32 .1.3.6.1.4.1.8708.2.55.2.2.1.1.1 |
ifOtnMonSmNameThe management name of the otn otu, for example 'otu:1:2:1-2',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers.ro MgmtNameString .1.3.6.1.4.1.8708.2.55.2.2.1.1.2 |
ifOtnMonSmConnIfBasicIfIndexAn index that describes to which index in ifBasicIf table
this object is related.ro Unsigned32WithNA .1.3.6.1.4.1.8708.2.55.2.2.1.1.3 |
ifOtnMonSmTxSignalStatusThe state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.2.1.1.4 |
ifOtnMonSmRxSignalStatusThe state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.2.1.1.5 |
ifOtnMonSmBackwardDefectIndicationBackward defect indication (BDI).
Indicates if backward defect indication (BDI) alarm
exists or not.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
alarm: Backward defect indication (in wrapper) active.
ok: Backward defect indication (in wrapper) inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.2.1.1.6 |
ifOtnMonSmIncomingAlignmentErrorIncoming alignment error (IAE).
Indicates an incoming frame alignment error.
Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798
A: Incoming frame alignment error (IAE) is active.
D: IAE is inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.2.1.1.7 |
ifOtnMonSmBackwardIncomingAlignmentErrorBackward incoming alignment error (BIAE).
Indicates a backward incoming alignment error.
Reference: 15.7.2.1.5 G.709, 6.2.6.10.1 G.798
A: Backward incoming alignment error (BIAE) is active.
D: BIAE is inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.2.1.1.8 |
ifOtnMonTcmList OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.2.3 |
ifOtnMonTcmTableThe tandem connection monitoring (tcm) group contains information
and configuration for the Tcm layer objects. SEQUENCE OF IfOtnMonTcmEntry .1.3.6.1.4.1.8708.2.55.2.3.1 |
ifOtnMonTcmEntryAn entry in the ifOtnMon tcm list. IfOtnMonTcmEntry .1.3.6.1.4.1.8708.2.55.2.3.1.1 |
ifOtnMonTcmIndexAn index assigned to each entry.ro Unsigned32 .1.3.6.1.4.1.8708.2.55.2.3.1.1.1 |
ifOtnMonTcmNameThe management name of the otn tcm, for example 'tcm:1:2:1-2:1',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers. The
last number tells which TCM in the ODU header it is.ro MgmtNameString .1.3.6.1.4.1.8708.2.55.2.3.1.1.2 |
ifOtnMonTcmConnOduIndexAn index that describes to which index in ifOtnMonOdu table
this object is related.ro Unsigned32WithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.3 |
ifOtnMonTcmAlarmModeTells how section specific alarms are handled.
ignore - Do not show fault status nor alarms for
non-operational sections.
display - Show fault status, but do not generate
alarms for non-operational sections.
alarm - Show fault status and generate alarms also
for non-operational sections.ro OtnAlarmMode .1.3.6.1.4.1.8708.2.55.2.3.1.1.4 |
ifOtnMonTcmModeTCM mode sets the mode of the TCM according to 14.5 in
G.798 (06/2004).
operational - The TCM overhead is operational.
transparent - The TCM overhead is transparent.
monitor - If TCM overhead is transparent but
consequent actions will be executed
in sink adaption.ro TcmMode .1.3.6.1.4.1.8708.2.55.2.3.1.1.5 |
ifOtnMonTcmTcmNumberTCM number in ODU overhead. Can be tcm1 .. tcm6.ro TcmNumber .1.3.6.1.4.1.8708.2.55.2.3.1.1.6 |
ifOtnMonTcmTxSignalStatusThe state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.7 |
ifOtnMonTcmRxSignalStatusThe state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.8 |
ifOtnMonTcmBackwardDefectIndicationRx Backward defect indication (BDI).
Indicates if backward defect indication (BDI) alarm
exists or not.
Reference: 15.8.2.2.3 G.709, 2.6.6.1 G.798
alarm: Backward defect indication (in wrapper) active.
ok: Backward defect indication (in wrapper) inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.9 |
ifOtnMonTcmBackwardIncomingAlignmentErrorBackward incoming alignment error (BIAE).
Indicates a backward incoming alignment error.
A: Backward incoming alignment error (BIAE) is active.
D: BIAE is inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.10 |
ifOtnMonTcmRxAlarmIndicationSignalRx Alarm indication signal (AIS).
Indicates if alarm indication signal (AIS) alarm
exists or not in receiving direction.
Reference: 16.5.1 G.709, 15.8.2.1.5 G.709, 6.2.6.3.2 G.798
alarm: An AIS in OTU signal is detected.
ok: AIS inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.11 |
ifOtnMonTcmRxOpenConnectionIndicationRx Open connection indication (OCI).
Indicates if an open connection indication (OCI) alarm
exists or not in receiving direction.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
alarm: An 'open connection' in OTU signal is detected.
ok: OCI inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.12 |
ifOtnMonTcmRxLockedDefectIndicationRx Locked defect indication (LCK).
Indicates if locked defect indication alarm exists or not.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
alarm: Locked defect indication active.
ok: Locked defect indication inactive.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.13 |
ifOtnMonTcmLossOfTandemConnectionLoss of tandem connection (LTC).
No operational tandem connection
is found in other end.
Reference: 6.2.1.4 in G.798
alarm: No other operational TCM is found.
ok: An operation TCM is found.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.14 |
ifOtnMonTcmIncomingAlignmentErrorIncoming alignment error (IAE).
Indicates an incoming frame alignment error when TCM is in use.
A: Incoming frame alignment error (IAE) is active.
D: IAE is inactive.
Reference: 14 in G.798ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.15 |
ifOtnMonTcmSwitchCriteriaTCM switch criteria set current TCM as protection switch criteria.
disable - The TCM is not set as switch criteria.
enable - The TCM is set as switch criteria.ro EnabledDisabledWithNA .1.3.6.1.4.1.8708.2.55.2.3.1.1.16 |
ifOtnMonPmList OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.2.4 |
ifOtnMonPmTableThe path monitoring (pm) group contains information and configu-
ration for the Pm layer objects. SEQUENCE OF IfOtnMonPmEntry .1.3.6.1.4.1.8708.2.55.2.4.1 |
ifOtnMonPmEntryAn entry in the ifOtnMon pm list. IfOtnMonPmEntry .1.3.6.1.4.1.8708.2.55.2.4.1.1 |
ifOtnMonPmIndexAn index assigned to each entry.ro Unsigned32 .1.3.6.1.4.1.8708.2.55.2.4.1.1.1 |
ifOtnMonPmNameThe management name of the otn pm, for example 'pm:1:2:1-2:1',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers. The
last number tells in which of the ODU the PM is located.ro MgmtNameString .1.3.6.1.4.1.8708.2.55.2.4.1.1.2 |
ifOtnMonPmConnOduIndexAn index that describes to which index in ifOtnMonOdu table
this object is related.ro Unsigned32WithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.4 |
ifOtnMonPmAlarmModeTells how section specific alarms are handled.
ignore - Do not show fault status nor alarms for non-operational sections.
display - Show fault status, but do not generate alarms for non-operational sections.
alarm - Show fault status and generate alarms also for non-operational sections.ro OtnAlarmMode .1.3.6.1.4.1.8708.2.55.2.4.1.1.5 |
ifOtnMonPmTxSignalStatusThe state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.6 |
ifOtnMonPmRxSignalStatusThe state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.7 |
ifOtnMonPmRxBackwardDefectIndicationRx Backward defect indication (BDI),
Monitored overhead: ODUk-PM-BDI
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the BDI is sent towards
the board-internal G.805 Matrix.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
Values:
alarm: The ODUk-PM-BDI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-BDI overhead is declared as inactive according to
the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.8 |
ifOtnMonPmRxAlarmIndicationSignalRx Alarm indication signal (AIS),
Monitored overhead: ODUk-PM-AIS
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the AIS is sent towards
the board-internal G.805 Matrix.
Reference: 16.5.1 G.709, 15.8.2.2.5 G.709, 6.2.3.2 G.798
Values:
alarm: The ODUk-PM-AIS overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-AIS overhead is declared as inactive according to
the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.9 |
ifOtnMonPmRxOpenConnectionIndicationRx Open connection indication (OCI).
Monitored overhead: ODUk-PM-OCI
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the OCI is sent towards
the board-internal G.805 Matrix.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
Values:
alarm: The ODUk-PM-OCI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-OCI overhead is declared as inactive according to
the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.10 |
ifOtnMonPmRxLockedDefectIndicationRx Locked defect indication (LCK).
Monitored overhead: ODUk-PM-LCK
Direction: Received from the associated physical interface
and, unless the ODUk is terminated, the LCK is sent towards
the board-internal G.805 Matrix.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
Values:
alarm: The ODUk-PM-LCK overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-LCK overhead is declared as inactive according to
the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.11 |
ifOtnMonPmTxBackwardDefectIndicationTx Backward defect indication (BDI).
Monitored overhead: ODUk-PM-BDI
Direction: Received from the board-internal G.805 Matrix and,
if applicable, sent towards the physical interface.
Reference: 15.7.2.1.3 G.709, 6.2.6.6.1 G.798
Values:
alarm: The ODUk-PM-BDI overhead is declared as active according to
the G.798 processing rules
ok: The ODUk-PM-BDI overhead is declared as inactive according to
the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.12 |
ifOtnMonPmTxAlarmIndicationSignalTx Alarm indication signal (AIS).
Monitored overhead: ODUk-PM-AIS
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 16.5.1 G.709, 15.8.2.2.5 G.709, 6.2.3.2 G.798
Values:
alarm: The ODUk-PM-AIS overhead is declared as active according
to the G.798 processing rules
ok: The ODUk-PM-AIS overhead is declared as inactive according
to the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.13 |
ifOtnMonPmTxOpenConnectionIndicationTx Open connection indication (OCI).
Monitored overhead: ODUk-PM-AIS
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 15.8.2.2.5 G.709, 6.2.6.8.2 G.798
Values:
alarm: The ODUk-PM-OCI overhead is declared as active
according to the G.798 processing rules
ok: The ODUk-PM-OCI overhead is declared as inactive
according to the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.14 |
ifOtnMonPmTxLockedDefectIndicationTx Locked Defect Indication (LCK).
Monitored overhead: ODUk-PM-LCK
Direction: Received from the board-internal G.805 Matrix
and, if applicable, sent towards the physical interface.
Reference: 15.8.2.2.5 G.709, 6.2.6.9.1 G.798
Values:
alarm: The ODUk-PM-LCK overhead is declared as active
according to the G.798 processing rules
ok: The ODUk-PM-LCK overhead is declared as inactive
according to the G.798 processing rulesro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.4.1.1.15 |
ifOtnMonPmUpPortIdInternal port reference for traffic unit.ro Integer32 (-1..2147483647) .1.3.6.1.4.1.8708.2.55.2.4.1.1.16 |
ifOtnMonTraceList OBJECT IDENTIFIER .1.3.6.1.4.1.8708.2.55.2.5 |
ifOtnMonTraceTableThe trace group contains information and configuration for the
trace objects defined in G.709. SEQUENCE OF IfOtnMonTraceEntry .1.3.6.1.4.1.8708.2.55.2.5.1 |
ifOtnMonTraceEntryAn entry in the ifOtnMon trace list. IfOtnMonTraceEntry .1.3.6.1.4.1.8708.2.55.2.5.1.1 |
ifOtnMonTraceIndexAn index assigned to each entry.ro Unsigned32 .1.3.6.1.4.1.8708.2.55.2.5.1.1.1 |
ifOtnMonTraceNameThe management name of the OTN trace, for example 'clientSmTrace:1:2:1-2',
where the first number indicates subrack, the second slot
number and the third/fourth are the physical port numbers.rw MgmtNameString .1.3.6.1.4.1.8708.2.55.2.5.1.1.2 |
ifOtnMonTraceConnOtnTypeWhat type of monitoring object the trace is related to.
sm - Section monitoring (SM).
pm - Path monitoring (PM).
tcm1 - Tandem connection monitoring (TCM)
tcm2 - Tandem connection monitoring (TCM)
tcm3 - Tandem connection monitoring (TCM)
tcm4 - Tandem connection monitoring (TCM)
tcm5 - Tandem connection monitoring (TCM)
tcm6 - Tandem connection monitoring (TCM)ro OtnTypeWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.3 |
ifOtnMonTraceConnOtnIndexAn index that describes to which index in SM, TCM or PM table
this object is related.ro Unsigned32WithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.4 |
ifOtnMonTraceSapiTraceTransmittedThe Source Access Point Identifier to be
transmitted from this interface.
Note, it is only possible to enter 15 characters since the first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.rw DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.5 |
ifOtnMonTraceSapiTraceReceivedByte0The received Source Access Point Identifier for this interface.
The value 255 is used by SNMP agent to show that the attribute is
not valid in current configuration.
The value 254 is used by SNMP agent to show that the attribute is
not possible to read at the moment.rodeprecated Unsigned32WithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.6 |
ifOtnMonTraceSapiTraceReceivedThe received Source Access Point Identifier for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.ro DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.7 |
ifOtnMonTraceSapiTraceExpectedSAPI used for matching against the received SAPI.
Note, it is only possible to enter 15 characters since first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.rw DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.8 |
ifOtnMonTraceDapiTraceTransmittedThe Destination Access Point Identifier to be
transmitted from this interface.
Note, it is only possible to enter 15 characters since first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.rw DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.9 |
ifOtnMonTraceDapiTraceReceivedByte0The received Destination Access Point Identifier for this interface.
The value 255 is used by SNMP agent to show that the attribute is
not valid in current configuration.
The value 254 is used by SNMP agent to show that the attribute is
not possible to read at the moment.rodeprecated Unsigned32WithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.10 |
ifOtnMonTraceDapiTraceReceivedThe received Destination Access Point Identifier for this interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.ro DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.11 |
ifOtnMonTraceDapiTraceExpectedDAPI used for matching against the received DAPI.
Note, it is only possible to enter 15 characters since the first
character is added automatically according to standard.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.rw DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.12 |
ifOtnMonTraceOpSpecificTraceTransmittedThe operator specific trace identifier to be transmitted
from this interface.
Set to empty string for default value.
<IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address
is used.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.rw DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.13 |
ifOtnMonTraceOpSpecificTraceReceivedThe received operator specific trace identifier for this
interface.
The trace _notApplicable_ is used to tell SNMP clients that
this attribute is not used in current configuration.
The trace _notAvailable_ is used to tell SNMP clients that
this attribute is not possible to read at the moment.ro DisplayStringWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.14 |
ifOtnMonTraceTraceIdMMDetectionModeThe method to detect a trace identifier mismatch value.
off - Mismatch will be ignored on all levels
sapi - Mismatch is based on mismatch in expected and received SAPI
trace
dapi - Mismatch is based on mismatch in expected and received DAPI
trace
both - Mismatch is based on both SAPI and DAPI traces.rw OtnTIMDetModeWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.15 |
ifOtnMonTraceTraceAlarmModeControls if the trace identifier mismatch alarm
should be raised. If trace alarm mode is enabled and if object
is set in terminating or monitor mode, BDI is sent
in backward direction if received trace and expected trace
differs.
disabled - The alarm is disabled.
enabled - The alarm is raised if expected trace identifier
differs from the received trace identifier.rodeprecated EnabledDisabledWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.16 |
ifOtnMonTraceTIMConsequenceActionsDisabledControls if the trace identifier mismatch should give rise
to any consequent actions in the downstream direction.
Consequent actions for the upstream direction are always enabled
regardless of this value.
true - No consequent actions due to trace identifier mis-
match alarm.
false - Consequent actions enabled.
Reference: 9, 13 and 14 in G.798ro TruthValueWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.17 |
ifOtnMonTraceTxSignalStatusThe state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.18 |
ifOtnMonTraceRxSignalStatusThe state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.ro SignalStatusWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.19 |
ifOtnMonTraceTraceMismatchTrace identifier mismatch (TIM).
Indicates if the expected SM/PM/TCM trace identifier
(SAPI and/or DAPI) differs from the received trace
identifier.
Reference: 15.8.2.2.1 G.709
alarm: The received trace identifier differs from
the expected trace identifier.
ok: The identifiers match.ro FaultStatusWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.20 |
ifOtnMonTraceConnOtnDirectionDirection of the trail trace identifier object
on the interface.
none - Direction is unambiguous.
rx - Received from the board-internal G.805 Matrix and,
if applicable, sent towards the physical interface.
tx - Received from the physical interface and, if applicable,
sent towards the board-internal G.805 Matrix.ro OtnDirectionWithNA .1.3.6.1.4.1.8708.2.55.2.5.1.1.21 |
ifOtnMonTraceUpPortIdInternal port reference for traffic unit.ro Integer32 (-1..2147483647) .1.3.6.1.4.1.8708.2.55.2.5.1.1.22 |