LSIRAID-IDE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for LSIRAID-IDE-MIB.
87
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
87 total| Object Name |
|---|
lsi OBJECT IDENTIFIER .1.3.6.1.4.1.674 |
RFC1155-SMI Unknown .1.3.6.1.4.1.674 |
megaIDE OBJECT IDENTIFIER .1.3.6.1.4.1.674.3 |
ide OBJECT IDENTIFIER .1.3.6.1.4.1.674.3.2 |
trRebuildStartedRebuild was started TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.200 |
trRebuildStopedRebuild was finished TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.201 |
trConsistencyStartedConsistency Check was started TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.202 |
trConsistencyStoppedConsistency check was finished TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.203 |
trPDriveStatusChangedDrive status has been changed TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.204 |
trLDriveStatusChangedLogical Drive status has been changed TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.205 |
trDriveNewErrorPhysical drive media error has been found TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.206 |
trDriveSMARTErrorS.M.A.R.T. error found TRAP-TYPE .1.3.6.1.4.1.674.3.2.0.207 |
ideControllers OBJECT IDENTIFIER .1.3.6.1.4.1.674.3.2.1 |
contNumberThe present number of rows in the Controllers table.ro Gauge .1.3.6.1.4.1.674.3.2.1.1 |
contTableEach row describes a MegaRAID IDE Controller Information. SEQUENCE OF ContEntry .1.3.6.1.4.1.674.3.2.1.2 |
contEntry ContEntry .1.3.6.1.4.1.674.3.2.1.2.1 |
contIndexIndex of Controller Information entry.ro INTEGER .1.3.6.1.4.1.674.3.2.1.2.1.1 |
contControllerIdMegaRAID IDE Controller Id.ro INTEGER .1.3.6.1.4.1.674.3.2.1.2.1.2 |
contModelModel name.ro DisplayString .1.3.6.1.4.1.674.3.2.1.2.1.3 |
contBIOSVersionBIOS version.ro DisplayString .1.3.6.1.4.1.674.3.2.1.2.1.4 |
contRevisionMegaRAID IDE Revision.ro DisplayString .1.3.6.1.4.1.674.3.2.1.2.1.5 |
contDriverVersionMegaRAID IDE driver versionro DisplayString .1.3.6.1.4.1.674.3.2.1.2.1.6 |
contBaseAddressController Bus Master Base address.ro DisplayString .1.3.6.1.4.1.674.3.2.1.2.1.7 |
contInterruptController interupt.ro DisplayString .1.3.6.1.4.1.674.3.2.1.2.1.8 |
contNumberOfChannelsAvailable IDE channels.ro INTEGER .1.3.6.1.4.1.674.3.2.1.2.1.9 |
contBuzzerBuzzer State.rw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.10 |
contRebRateRebuild rate of physical drive(s)rw INTEGER .1.3.6.1.4.1.674.3.2.1.2.1.11 |
contBIOSStateController BIOS Staterw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.12 |
contStopOnErrorStop On Errorrw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.13 |
contNewDevConfHow new device(s) will configured.rw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.14 |
contFastInitHow initialization will performed FAST/Complete.rw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.15 |
contCCStateConsistency Check Optionsrw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.16 |
contAutoRebuildIn case of drive failure Rebuild will be started Automatically.rw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.17 |
contBootLDBoot Logical driverw INTEGER .1.3.6.1.4.1.674.3.2.1.2.1.18 |
contPDSmartStatusSMART status for drive(s) under this controllerrw Enumeration .1.3.6.1.4.1.674.3.2.1.2.1.19 |
contPDSmartPollIntervalSMART polling interval in minutesrw INTEGER .1.3.6.1.4.1.674.3.2.1.2.1.20 |
ideLogicalDrives OBJECT IDENTIFIER .1.3.6.1.4.1.674.3.2.2 |
ldNumberThe present number of rows in the LD table.ro Gauge .1.3.6.1.4.1.674.3.2.2.1 |
ldTableEach row describes a LD Information. SEQUENCE OF LDEntry .1.3.6.1.4.1.674.3.2.2.2 |
ldEntry LDEntry .1.3.6.1.4.1.674.3.2.2.2.1 |
ldIndexIndex of LD Information entry.ro INTEGER .1.3.6.1.4.1.674.3.2.2.2.1.1 |
ldIDLogical drive ID.ro INTEGER .1.3.6.1.4.1.674.3.2.2.2.1.2 |
ldNameLD Namero DisplayString .1.3.6.1.4.1.674.3.2.2.2.1.3 |
ldModeLD mode.ro DisplayString .1.3.6.1.4.1.674.3.2.2.2.1.4 |
ldStatusLD status.ro Enumeration .1.3.6.1.4.1.674.3.2.2.2.1.5 |
ldStripeSizeLD Stripe size.ro DisplayString .1.3.6.1.4.1.674.3.2.2.2.1.6 |
ldCapacityLD size.ro DisplayString .1.3.6.1.4.1.674.3.2.2.2.1.7 |
ldDriveLettersDrive letters for particular LD.ro DisplayString .1.3.6.1.4.1.674.3.2.2.2.1.8 |
ldNumStripesNo of stripes for this logical drivero INTEGER .1.3.6.1.4.1.674.3.2.2.2.1.9 |
ldSpansNo of span(s) for this logical drivero INTEGER .1.3.6.1.4.1.674.3.2.2.2.1.10 |
ldStartLBAStart LBA of this LDro DisplayString .1.3.6.1.4.1.674.3.2.2.2.1.11 |
ldPDriveIDPhysical drive ID(s) which are part of this LDro DisplayString .1.3.6.1.4.1.674.3.2.2.2.1.12 |
ldOperationOperation performing on this logical drive.ro Enumeration .1.3.6.1.4.1.674.3.2.2.2.1.13 |
ldOpProgressProgress percentage for the operation.ro INTEGER .1.3.6.1.4.1.674.3.2.2.2.1.14 |
idePhysicalDrives OBJECT IDENTIFIER .1.3.6.1.4.1.674.3.2.3 |
pdrNumberThe present number of rows in the Physical Drive table.ro Gauge .1.3.6.1.4.1.674.3.2.3.1 |
pdrTableEach row describes a Physical Drive Information. SEQUENCE OF PdrEntry .1.3.6.1.4.1.674.3.2.3.2 |
pdrEntry PdrEntry .1.3.6.1.4.1.674.3.2.3.2.1 |
pdrIndexIndex of Drives Information entry.ro INTEGER .1.3.6.1.4.1.674.3.2.3.2.1.1 |
pdrDriveIdDrive Id.ro INTEGER .1.3.6.1.4.1.674.3.2.3.2.1.2 |
pdrConnectionPhysical Drive connection.ro DisplayString .1.3.6.1.4.1.674.3.2.3.2.1.3 |
pdrModelPhysical drive model.ro DisplayString .1.3.6.1.4.1.674.3.2.3.2.1.4 |
pdrStatusDrive status.ro Enumeration .1.3.6.1.4.1.674.3.2.3.2.1.5 |
pdrErrorCountMedia errors count in drive.ro INTEGER .1.3.6.1.4.1.674.3.2.3.2.1.6 |
pdrCapacityPhysical drive size.ro DisplayString .1.3.6.1.4.1.674.3.2.3.2.1.7 |
pdrTransferModeTransfer mode.rw Enumeration .1.3.6.1.4.1.674.3.2.3.2.1.8 |
pdrSerialNumberDrive's serial number.ro DisplayString .1.3.6.1.4.1.674.3.2.3.2.1.9 |
pdrContIDController ID where this Device is present.ro INTEGER .1.3.6.1.4.1.674.3.2.3.2.1.10 |
pdrFirmwareDrive's Firmware.ro DisplayString .1.3.6.1.4.1.674.3.2.3.2.1.11 |
pdOpProgressProgress percentage , if drive status is rebuildingro INTEGER .1.3.6.1.4.1.674.3.2.3.2.1.12 |
pdWriteCacheWrite cache optionrw Enumeration .1.3.6.1.4.1.674.3.2.3.2.1.13 |
pdReadAheadRead Ahead optionrw Enumeration .1.3.6.1.4.1.674.3.2.3.2.1.14 |
pdrSmartStatusIs this device S.M.A.R.T. compiliant?ro Enumeration .1.3.6.1.4.1.674.3.2.3.2.1.15 |
versionInfo OBJECT IDENTIFIER .1.3.6.1.4.1.674.3.2.4 |
mibVersionThe MIB version in xx.yy.zz formatro DisplayString .1.3.6.1.4.1.674.3.2.4.1 |
agentModuleNameModule Namero DisplayString .1.3.6.1.4.1.674.3.2.4.2 |
agentModuleVersionModule Versionro DisplayString .1.3.6.1.4.1.674.3.2.4.3 |
companyNameCompany Namero DisplayString .1.3.6.1.4.1.674.3.2.4.4 |
releaseDateRelease Datero DisplayString .1.3.6.1.4.1.674.3.2.4.5 |
ideTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.674.3.2.5 |
rtContIDController ID for which Trap is generated.ro INTEGER .1.3.6.1.4.1.674.3.2.5.1 |
rtLDriveIDLogical Drive Number for which Trap is generated.ro INTEGER .1.3.6.1.4.1.674.3.2.5.2 |
rtPDrvIDDevice ID of the Physical Drive for which Trap is Generated.ro INTEGER .1.3.6.1.4.1.674.3.2.5.3 |
rtPDriveStatusPhysical drive status. Enumeration .1.3.6.1.4.1.674.3.2.5.4 |
rtLDriveStatusLogical drive status. Enumeration .1.3.6.1.4.1.674.3.2.5.5 |
rtLDrvOPStatusLast operation status for Logical drive. Enumeration .1.3.6.1.4.1.674.3.2.5.6 |
rtDriveErrorTypePhysical drive error types. Enumeration .1.3.6.1.4.1.674.3.2.5.7 |
More MIBs from Dell
Browse all DellMIBs →FluidFS-MIB
SNMP MIB module
1349 objects→
MIB-Dell-10892
SNMP MIB module
1338 objects→
DNOS-SWITCHING-MIB
SNMP MIB module
920 objects→
IDRAC-MIB-SMIv2
The IDRAC-MIB-SMIv2 module enables SNMP-based out-of-band monitoring of Dell iDRAC hardware by exposing system telemetry metrics such as temperature, fan speed, power supply status, and memory utilization, while facilitating event notification through defined SNMP traps.
854 objects→
IDRAC-MIB
Standard SNMP MIB module defining data structures for IDRAC-MIB.
782 objects→
ArrayManager-MIB
Standard SNMP MIB module defining data structures for ArrayManager-MIB.
719 objects→