LS100-R3-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
78
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
nec OBJECT IDENTIFIER .1.3.6.1.4.1.119 |
RFC1155-SMI Unknown .1.3.6.1.4.1.119 |
nec-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2 |
necProductDepend OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3 |
atomis-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.14 |
m5core-mib OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.14.3 |
node OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.14.3.1 |
nodeOperStatusOperational status of the LS100.ro Enumeration .1.3.6.1.4.1.119.2.3.14.3.1.1 |
nodeIfConfTableThe configuration of the line cards. SEQUENCE OF NodeIfConfEntry .1.3.6.1.4.1.119.2.3.14.3.1.2 |
nodeIfConfEntryThe configuration of a line card. NodeIfConfEntry .1.3.6.1.4.1.119.2.3.14.3.1.2.1 |
nodeIfConfIndexThe index of the table. Same as ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.14.3.1.2.1.1 |
nodeIfConfPhysTypeThe PMD/physical layer format of the line card.ro Enumeration .1.3.6.1.4.1.119.2.3.14.3.1.2.1.2 |
nodeIfConfRevThe revision of the line cards.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.14.3.1.2.1.3 |
nodeIfConfStatusOperational status of the line card.ro Enumeration .1.3.6.1.4.1.119.2.3.14.3.1.2.1.4 |
nodeFanStatusOperational status of the Fan.ro Enumeration .1.3.6.1.4.1.119.2.3.14.3.1.3 |
nodeUpcWindowSizeUPC window size. Integer Wi represents Wi X 512 cell time.
Wi=1 correspond to 1.4msec. Wi=120 correspond to 168msec.
It is not allowed to change window size when any PVC
exists.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.1.4 |
nodeBestEffortBufferSizeInput buffer capacity for Best Effort traffic(Bb). The
number of cells stored in the buffer is Bb X 128. The
default value is 8. The sum of the buffer capacity is
2047 cells.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.1.5 |
nodeGuaranteedBufferSizeInput buffer capacity for Guaranteed traffic(Bg). The
number of cells stored in the buffer is Bg X 128. The
default value is 0. The sum of the buffer capacity is
2047 cells.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.1.6 |
nodeBestEffortBufferThresholdThreshold buffer capacity for Best Effort traffic. If
the number of cells stored in the buffer exceeds this
threshold, cells with CLP=1 and traffic defined as UBR
will be discarded.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.1.7 |
nodeGuaranteedBufferThresholdThreshold buffer capacity for Guaranteed traffic. If
the number of cells stored in the buffer exceeds this
threshold, cells with CLP=1 and traffic defined as VBR
will be discarded.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.1.8 |
nodeSaveConfSave system configuration information including the PVC
table to the non-volatile memory. Writing a value of
save(1) saves the configiration data. Writing the value
noOperation(2) has no effect.
When read, this object always has the value noOperation(2).rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.1.9 |
nodeSaveResultIndicates the result of the save command issued from NMS.
The result is either success/temporary failure/notReady.ro Enumeration .1.3.6.1.4.1.119.2.3.14.3.1.10 |
nodeResetWriting the value reset(1) resets the system. Writing
the value noOperation(2) has no effect. When read, this
object always has the value noOperation(2).rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.1.11 |
linf OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.14.3.2 |
linfStatusTableStatus of the line cards including ATM specific information. SEQUENCE OF LinfStatusEntry .1.3.6.1.4.1.119.2.3.14.3.2.1 |
linfStatusEntryStatus of a line card including ATM specific information. LinfStatusEntry .1.3.6.1.4.1.119.2.3.14.3.2.1.1 |
linfIndexSame as ifIndexro INTEGER .1.3.6.1.4.1.119.2.3.14.3.2.1.1.1 |
linfStatusStatus of line interfacero Enumeration .1.3.6.1.4.1.119.2.3.14.3.2.1.1.2 |
linfConfLine card type.rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.2.1.1.3 |
linfFwdAvailableBandWidthThe amount of bandwidth (Mbps) available/unallocated in
the forward (incoming) direction.ro INTEGER .1.3.6.1.4.1.119.2.3.14.3.2.1.1.4 |
linfBkwdAvailableBandWidthThe amount of bandwidth (Mbps) available/unallocated in
the backward (outgoing) direction.ro INTEGER .1.3.6.1.4.1.119.2.3.14.3.2.1.1.5 |
conn OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.14.3.3 |
connPvcIndexNextThe next available index for a row of the connPvcTable.ro INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.1 |
connPvcIndexEnableWhen read, this object is the current minimum value of
an index in the connPvcTable. Writing this value has no
effect.rwdeprecated INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.2 |
connPvcTableThe table containing information on current PVC/SVCs.
Currently, only PVCs are represented in this table.
The table is also used to establish and delete PVCs.
1. PVC establishment procedure
(1) Read connPvcIndexNext. This value is used as the
value of connPvcIndex for the new connection.
(2) Determine the value of connPvcHighIfIndex. When
creating a new point-to-multipoint connection,
connPvcHighIfIndex must identify the first leaf.
When creating a new point-to-point connection,
connPvcHighIfIndex normally identifies the interface
with the higher value of ifIndex.
(3) Set connPvcRowStatus to 'createAndWait' using the
values of connPvcIndex and connPvcHighIfIndex as indexes.
This causes the switch to create the new row with some
objects being set to default values. The parameters for
which there is no reasonable default are set to 0xffffffff.
Object Default
connPvcTopology bidirectionalVCC(2)
connPvcTrafficType trafficUBR(4)
connPvcLowIfIndex 0xffffffff
connPvcLowVPI 0xffffffff
connPvcLowVCI 0xffffffff
connPvcLowUpcParam 512
connPvcLowUpc pass(1)
connPvcLowThroughput 0
connPvcHighVPI 0xffffffff
connPvcHighVCI 0xffffffff
connPvcHighUpcParam 512
connPvcHighUpc pass(1)
connPvcHighThroughput 0
The switch then sets the value of connPvcRowStatus to
'notReady'. The default values can be read by the NMS.
(4) The values of the above objects which are set to
0xffffffff must be modified, and the values of any other
objects can be changed. When establishing a VP connection,
connPvcLowVCI and connPvcHighVCI should be set to 0.
When connPvcTrafficType is set to trafficUBR, the values
of connPvcLowThroughput and connPvcHighThroughput are
ignored. When all parameters have acceptable values, the
switch sets connPvcRowStatus to 'notInService'.
(5) When the NMS sets connPvcRowStatus to 'active', the
switch validates each parameter's value, and tries to
establish the connection. If this operation fails, the
the cause of the failure is indicated by the value of
connPvcCause.
At present, the switch allows connPvcRowStatus to have a
value of notReady or notInService for only one row at a
time.
2. Adding a new leaf to an existing pt-to-mpt connection
(1) Determine the value of connPvcIndex for the existing
point-to-multipoint connection to which a new leaf is
to be added.
(2) Determine the value of connPvcHighIfIndex as the
ifIndex value of the interface to be used for the new leaf.
(3) Set connPvcRowStatus to 'createAndWait' using the
values of connPvcIndex and connPvcHighIfIndex as indexes.
This causes the switch to create the new leaf with some
objects being set to default values. The parameters for
which there is no reasonable default are set to 0xffffffff.
Object Default
connPvcHighVPI 0xffffffff
connPvcHighVCI 0xffffffff
connPvcHighUpcParam 512
connPvcHighUpc pass(1)
connPvcHighThroughput 0
The switch then sets the value of connPvcRowStatus to
'notReady'. The default values can be read by the NMS.
(4) The NMS must modify the values of connPvcHighVPI and
connPvcHighVCI, and can modify the values of connPvcHighUpc,
connPvcHighUpcParam and connPvcHighThroughput. When
establishing a VP connection, connPvcHighVCI should
be set to 0. The NMS should not change the values of
the following objects:
connPvcTopology
connPvcTrafficType
connPvcLowIfIndex
connPvcLowVPI
connPvcLowVCI
connPvcLowUpcParam
connPvcLowUpc
connPvcLowThroughput
When all parameters have acceptable values, the switch
sets connPvcRowStatus to 'notInService'.
(5) When the NMS sets connPvcRowStatus to 'active', the
switch validates each parameter's value, and tries to add
the new leaf to the original connection. If this operation
fails, the cause of the failure is indicated by the value
of connPvcCause.
3. PVC deletion procedure
(1) Set the connPvcRowStatus to 'destroy'.
If the row exists but is impossible to delete, the cause
of the failure is indicated by the value of connPvcCause.
If the deletion is successful, the row is deleted
(including the instance of connPvcCause for that row).
Notes:
- a row representing a terminating VP will not have
instances of the following objects: connPvcLowUpc,
connPvcLowUpcParam, connPvcLowThroughput, connPvcHighUpc,
connPvcHighUpcParam, connPvcHighThroughput,
connPvcLowOutCells, connPvcHighInCells,
connPvcHighUpcViolatedCells, connPvcLowInCells,
connPvcHighOutCells, and connPvcLowUpcViolatedCells.
- a row representing a connection between the
gateway-PAD (the switch's internal port) and a line
interface will not have instances of the following
objects: connPvcLowUpc, connPvcLowUpcParam,
connPvcLowThroughput, connPvcHighUpc, connPvcHighUpcParam,
connPvcHighThroughput, connPvcHighOutCells,
connPvcHighInCells, and connPvcHighUpcViolatedCells. SEQUENCE OF ConnPvcEntry .1.3.6.1.4.1.119.2.3.14.3.3.3 |
connPvcEntryA row in the table is used to show the current PVC/SVCs. ConnPvcEntry .1.3.6.1.4.1.119.2.3.14.3.3.3.1 |
connPvcIndexA unique value to identify this point-to-point
or point-to-multipoint connection.
A point-to-multipoint connection has multiple
rows in this table, one for each leaf, each
one having the same value of this object.ro INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.1 |
connPvcTopologyTopology of the connection.rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.3.3.1.2 |
connPvcTrafficTypeTraffic Type.rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.3.3.1.3 |
connPvcLowIfIndexThe line interface number (ifIndex) of the low port.
Normally, the low port has a lower ifIndex value than
the high port. However, for point-to-multipoint
connections, the root is always the low port, regardless
of whether it is greater or smaller than the port numbers
of individual leaves.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.4 |
connPvcLowVPIVPI value of the connection on the low port.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.5 |
connPvcLowVCIVCI value of the connection on the low port.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.6 |
connPvcLowUpcParamNumber of cells allowed to be sent in the unit cell
time (512 cell times).rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.7 |
connPvcLowUpcThe action to take on a UPC violation for this connection
on the low port. The tagging action is not supported by
current hardware.rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.3.3.1.8 |
connPvcLowThroughputAverage rate of the connection (Mbps). Direction is from
the low port to high port. This parameter is valid
for the connection whose traffic type is CBR or VBR.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.9 |
connPvcHighIfIndexThe line interface number (ifIndex) of the high port.
Normally, the high port has a higher ifIndex value than
the low port. However, for point-to-multipoint
connections, the root is always the low port, regardless
of whether it is greater or smaller than the port numbers
of individual leaves. Line interface number 17
corresponds to gateway (the switch's internal port).ro INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.10 |
connPvcHighVPIThe VPI value of the connection on the high port.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.11 |
connPvcHighVCIThe VCI value of the connection on the high port.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.12 |
connPvcHighUpcParamNumber of cells allowed to be sent in the unit cell
time (512 cell times).rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.13 |
connPvcHighUpcThe action to take on a UPC violation for this connection
on the high port. The tagging action is not supported by
current hardware.rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.3.3.1.14 |
connPvcHighThroughputAverage rate of the connection (Mbps). Direction is from
the high port to low port. This parameter is valid
for the connection whose traffic type is CBR or VBR.rw INTEGER .1.3.6.1.4.1.119.2.3.14.3.3.3.1.15 |
connPvcLowInCellsNumber of incoming cells on this connection on low port.ro Counter .1.3.6.1.4.1.119.2.3.14.3.3.3.1.16 |
connPvcHighOutCellsNumber of outgoing cells on this connection on the high
port.ro Counter .1.3.6.1.4.1.119.2.3.14.3.3.3.1.17 |
connPvcHighInCellsNumber of incoming cells on this connection on high port.
(Valid for bi-direction connections only).ro Counter .1.3.6.1.4.1.119.2.3.14.3.3.3.1.18 |
connPvcLowOutCellsNumber of outgoing cells on this connection on the low.
port. (Valid for bi-direction connections only).ro Counter .1.3.6.1.4.1.119.2.3.14.3.3.3.1.19 |
connPvcLowUpcViolatedCellsNumber of UPC violation cells incoming from the low
port.ro Counter .1.3.6.1.4.1.119.2.3.14.3.3.3.1.20 |
connPvcHighUpcViolatedCellsNumber of UPC violation cells incoming from the high
port. (Valid for bi-direction connections only).ro Counter .1.3.6.1.4.1.119.2.3.14.3.3.3.1.21 |
connPvcRowStatusThe status of this row.
'active' indicates that the connection is in use.
'notInService' indicates that the row exists but
the connection is not established.
'notReady' indicates that the row exists in the agent,
but is missing information necessary in order
to be established.
'createAndWait' supplied by a management station
wishing to create a new row.
'destroy' supplied by a management station wishing to
delete the row.rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.3.3.1.22 |
connPvcCauseThe result of the PVC establishment/deletion.ro Enumeration .1.3.6.1.4.1.119.2.3.14.3.3.3.1.23 |
connPvcKindThis object identifies the connection is SVC or PVC.ro Enumeration .1.3.6.1.4.1.119.2.3.14.3.3.3.1.24 |
perf OBJECT IDENTIFIER .1.3.6.1.4.1.119.2.3.14.3.4 |
perfTrapEnableThe status of performance monitoring traps. Its value
does not affect other traps, such as coldStart.rw Enumeration .1.3.6.1.4.1.119.2.3.14.3.4.1 |
perfIfTableTable of performance monitoring information. SEQUENCE OF PerfIfEntry .1.3.6.1.4.1.119.2.3.14.3.4.2 |
perfIfEntryPerformance monitoring information for a specific line. PerfIfEntry .1.3.6.1.4.1.119.2.3.14.3.4.2.1 |
perfIfIndexLine interface number. Same as ifIndex.ro INTEGER .1.3.6.1.4.1.119.2.3.14.3.4.2.1.1 |
perfIfLcvsLine Code Violation. This object is valid only for
DS3/E3.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.2 |
perfIfParitySectionsNumber of B1 (BIP) errors(OC-3c, UTP-5),
Number of C-bit parity violation(DS3),
Number of CRC-6 violation(DS1).ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.3 |
perfIfParityLinesNumber of B2 (BIP) errors(OC-3c, UTP-5),
Number of P-bit parity violation(DS3).ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.4 |
perfIfParityPathsNumber of B3 (BIP) errors(OC-3c, UTP-5),
Number of PLCP BIP violation(DS3).ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.5 |
perfIfHecErrorsNumber of HEC errors detected.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.6 |
perfIfMisDelivdCellsNumber of misdelivered cells.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.7 |
perfIfOverFlowCellsNumber of cells discarded due to buffer overflow.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.8 |
perfIfInCBRCellsNumber of received CBR cells.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.9 |
perfIfOutCBRCellsNumber of transmitted CBR cells.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.10 |
perfIfInVBRCellsNumber of received VBR cells.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.11 |
perfIfOutVBRCellsNumber of transmitted VBR cells.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.12 |
perfIfInUBRCellsNumber of received UBR cells.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.15 |
perfIfOutUBRCellsNumber of transmitted UBR cells.ro Counter .1.3.6.1.4.1.119.2.3.14.3.4.2.1.16 |