LINKSYS-rlBrgMulticast-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for LINKSYS-rlBrgMulticast-MIB.
125
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
125 total| Object Name |
|---|
rlMacMulticastUnregFilterFailedWarning trap indicating - Setting Mac Unregistered Filtering on port is failed. The bound variable rndErrorDesc provides the interface number. TRAP-TYPE .1.3.6.1.4.1.89.0.1 |
rlIgmpMldSnoopTriplePlayPortInformational trap indicating that a query was recieved on a triple play port. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.94.89.89.0.208 |
rlbrgIgmpSnoopQrrDuplicateIPWarning trap indicating that duplicate ip\ipv6 address
occured between two queries NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.94.89.89.0.227 |
rlMacMulticastEnableEnable/Disable MAC Multicast bridging in the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.1 |
rlIgmpSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.94.89.89.55.2 |
rlIgmpSnoopMibVersionMIB's version, the current version is 3.
IGMP Snooping supports IGMPv3.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.55.2.1 |
rlIgmpSnoopEnableEnable/Disable IGMP Snooping in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.2 |
rlIgmpSnoopHostAgingTimeThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopGroupTable will be aged out.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.2.3 |
rlIgmpSnoopRouterAgingTimeThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopInterfaceTable will be aged out.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.2.4 |
rlIgmpSnoopVlanTableThe table listing the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.obsolete SEQUENCE OF RlIgmpSnoopVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.7 |
rlIgmpSnoopVlanEntryAn entry (conceptual row) in the rlIgmpSnoopVlanTable.obsolete RlIgmpSnoopVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1 |
rlIgmpSnoopVlanTagThe tag of the VLAN for which this entry contains
information for an IP Multicast Router.roobsolete INTEGER .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.1 |
rlIgmpSnoopVlanEnableEnable/Disable IGMP Snooping in the vlan.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.2 |
rlIgmpSnoopVlanRouterLearnEnable/Disable of Learning of routers in the vlan.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.3 |
rlIgmpSnoopVlanHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.4 |
rlIgmpSnoopVlanQuerierTimeOutThe amount of time where no query is heard until
querier is activatedrwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.5 |
rlIgmpSnoopVlanRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.6 |
rlIgmpSnoopVlanLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.7 |
rlIgmpSnoopVlanIgmpVersionThe current IGMP protocol version running on the VLAN.roobsolete IgmpVersion .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.8 |
rlIgmpSnoopVlanRouterPortlistList of router ports learned dynamically on this VLAN
from PIM, DVMRP, MRDISC and IGMP Query messagesroobsolete PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.9 |
rlIgmpSnoopIGMP224ReportsHandleThis varaiable indicates whether to allow IGMP reports for groups in the
224.0.0.X range when the group address is already manually configured or to ignore.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.55.2.8 |
rlIgmpSnoopMulticastTvTablemulticast vlan used for this port SEQUENCE OF RlIgmpSnoopMulticastTvEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.10 |
rlIgmpSnoopMulticastTvEntryentry of multicast ip RlIgmpSnoopMulticastTvEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.10.1 |
rlIgmpSnoopMulticastTvVIDSpecify the multicast ip to be used.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.1 |
rlIgmpSnoopMulticastTvGroupSpecify the multicast ip to be used.ro IpAddress .1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.2 |
rlIgmpSnoopMulticastTvStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.3 |
rlIgmpSnoopMembershipTableThe table listing the IP multicast memberships. SEQUENCE OF RlIgmpSnoopMembershipEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.11 |
rlIgmpSnoopMembershipEntryAn entry (conceptual row) in the rlIgmpSnoopMembershipTable. RlIgmpSnoopMembershipEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1 |
rlIgmpSnoopMembershipVlanTagThe VLAN tag for which this entry contains multicast membership information.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.1 |
rlIgmpSnoopMembershipGroupIpAddressThe multicast group address.ro IpAddress .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.2 |
rlIgmpSnoopMembershipSourceIpAddressThe unicast source address.ro IpAddress .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.3 |
rlIgmpSnoopMembershipIncPortlistIncluded ports, where a report message was heard for the group
(IGMP version 2|1) or group and source address (IGMP version 3).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.4 |
rlIgmpSnoopMembershipExcPortlistExcluded ports where an exclude report message
was heard for the group and source address (IGMP version 3).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.5 |
rlIgmpSnoopMembershipExpiryTimeTime till entry will expire.roobsolete INTEGER .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.6 |
rlIgmpSnoopMembershipCompatibilityModeIGMP group compatibility mode.ro IgmpVersion .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.7 |
rlIgmpSnoopQuerierVlanTableA table that contains IGMP Snooping Querier information about
every vlan. This is indexed by vlan tag. SEQUENCE OF RlIgmpSnoopQuerierVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.12 |
rlIgmpSnoopQuerierVlanEntryAn entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable. RlIgmpSnoopQuerierVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1 |
rlIgmpSnoopQuerierVlanTagAn IGMP Snoop Querier entry vlan tag.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.1 |
rlIgmpSnoopQuerierAdminEnableThe desired administrative state of IGMP Snoop Querier on the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.2 |
rlIgmpSnoopQuerierOperEnableThe current operational state of IGMP Snoop Querier on the vlan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.3 |
rlIgmpSnoopQuerierAdminAddrThe desired IP address is being used in IGMP Snoop Querier messages on the vlan.rw IpAddress .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.4 |
rlIgmpSnoopQuerierOperAddrThe current operational IP address is being used in IGMP Snoop Querier messages on the vlan.ro IpAddress .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.5 |
rlIgmpSnoopQuerierAdminVersionNumberThe highest version number of IGMP Snoop Querier for the vlan.rw IgmpVersion .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.6 |
rlIgmpSnoopQuerierOperVersionNumberThe current operational version number of IGMP Snoop Querier for the vlan.ro IgmpVersion .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.7 |
rlIgmpSnoopQuerierElectionEnableWhether or not to participate in querier election.
When true, the snooping querier participates in querier election.
When false, the snooping querier is the elected querier until a general
query is heard from another router on the vlan (always lose).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.8 |
rlIgmpSnoopQuerierEnableGlobally enable/disable IGMP Snooping Querier in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.2.13 |
rlMacMulticastMaxEntriesNumThe maximum number of Mac Multicast entries the device supports.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.55.3 |
rlMacMulticastFilter OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.94.89.89.55.4 |
rlMacMulticastUnregFilterEnableEach bit represent a port whether Unregistered Multicast Filtering enablerw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.4.1 |
rlMldSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.94.89.89.55.5 |
rlMldSnoopEnableEnable/Disable Mld Snooping in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.1 |
rlMldSnoopHostAgingTimeThe amount of time that should pass before aging out
an entry in the rlMldSnoopGroupTable will be aged out.rwobsolete INTEGER (60 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.2 |
rlMldSnoopRouterAgingTimeThe amount of time that should pass before aging out
an entry in the rlMldSnoopInterfaceTable will be aged out.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.3 |
rlIgmpMldSnoopMembershipTableThe table listing the IP multicast memberships. SEQUENCE OF RlIgmpMldSnoopMembershipEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.4 |
rlIgmpMldSnoopMembershipEntryAn entry (conceptual row) in the rlIgmpMldSnoopMembershipTable. RlIgmpMldSnoopMembershipEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1 |
rlIgmpMldSnoopMembershipVlanTagThe VLAN tag for which this entry contains multicast membership information.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.1 |
rlIgmpMldSnoopMembershipGroupIpAddressTypeInet type IPv4/IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.2 |
rlIgmpMldSnoopMembershipGroupIpAddressThe multicast group address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.3 |
rlIgmpMldSnoopMembershipSourceIpAddressTypeInet type IPv4/IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.4 |
rlIgmpMldSnoopMembershipSourceIpAddressThe unicast source address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.5 |
rlIgmpMldSnoopMembershipIncPortlistIncluded ports, where a report message was heard for the group
(IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.6 |
rlIgmpMldSnoopMembershipExcPortlistlist of excluded ports to which an exclude report message
was heard for the group and source address (IGMPv3/MLDv2 ).ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.7 |
rlIgmpMldSnoopMembershipExpiryTimeTime till entry will expire.roobsolete INTEGER .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.8 |
rlIgmpMldSnoopMembershipCompatibilityModeIGMP/MLD group compatibility mode.ro IgmpVersion .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.9 |
rlIgmpMldSnoopVlanTableThe table lists the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports. SEQUENCE OF RlIgmpMldSnoopVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.5 |
rlIgmpMldSnoopVlanEntryAn entry (conceptual row) in the rlIgmpSnoopVlanTable. RlIgmpMldSnoopVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1 |
rlIgmpMldSnoopVlanInetAddressTypeInet type ipv6/ipv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.1 |
rlIgmpMldSnoopVlanTagThe tag of the VLAN for which this entry contains
information for an IP Multicast Router.ro INTEGER .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.2 |
rlIgmpMldSnoopVlanEnableEnable/Disable IGMP Snooping in the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.3 |
rlIgmpMldSnoopVlanRouterLearnEnable/Disable of Learning of routers in the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.4 |
rlIgmpMldSnoopVlanHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.rwobsolete INTEGER (60 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.5 |
rlIgmpMldSnoopVlanQuerierTimeOutThe amount of time where no query is heard until
querier is activatedrwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.6 |
rlIgmpMldSnoopVlanRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.rwobsolete INTEGER (1 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.7 |
rlIgmpMldSnoopVlanLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.rwobsolete INTEGER (0 .. 2147483647 ) UNITS "seconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.8 |
rlIgmpMldSnoopVlanIgmpVersionThe current IGMP protocol version running on the VLAN.ro IgmpVersion .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.9 |
rlIgmpMldSnoopVlanRouterPortlistList of router ports learned dynamically
from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLANro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.10 |
rlIgmpMldSnoopVlanRouterStaticPortlistList of router ports configured statically on this VLAN.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.11 |
rlIgmpMldSnoopVlanRouterForbiddenPortlistList of ports statically configured to NOT
be router ports on this VLANrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.12 |
rlIgmpMldSnoopVlanQueryOverrideEnable/Disable overriding of Query valuesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.13 |
rlIgmpMldSnoopVlanOperRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are robust to (Robustness Variable-1) packet losses.ro Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.14 |
rlIgmpMldSnoopVlanOperQueryIntervalThe frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value.ro Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.15 |
rlIgmpMldSnoopVlanOperQueryMaxResponseTimeThe maximum query response interval advertised in MGMDv2
or v3 queries on this interface.ro Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.16 |
rlIgmpMldSnoopVlanOperLastMemberQueryIntervalThe Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time between group-specific query messages. This value
may be tuned to modify the leave latency of the network. A
reduced value results in reduced time to detect the loss of
the last member of a group. The value of this object is
irrelevant if mgmdRouterInterfaceVersion is 1.ro Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.17 |
rlIgmpMldSnoopVlanOperLastMemberQueryCountRepresents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members.ro Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.18 |
rlIgmpMldSnoopVlanOperStartupQueryIntervalThis variable represents the interval between General
Queries sent by a Querier on startup.ro Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.19 |
rlIgmpMldSnoopVlanOperStartupQueryCountRepresents the number of Queries sent out on startup
separated by the Startup Query Interval.ro Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.20 |
rlIgmpMldSnoopVlanOperHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldSnoopVlanOperQueryInterval +
rlIgmpMldSnoopVlanOperQueryMaxResponseTime }ro Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.21 |
rlIgmpMldSnoopVlanOperRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldSnoopVlanOperQueryInterval }ro Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.22 |
rlIgmpMldSnoopVlanOperLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
DEFVAL { rlIgmpMldSnoopVlanOperLastMemberQueryCount *
rlIgmpMldSnoopVlanOperLastMemberQueryInterval }ro Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.23 |
rlIgmpMldSnoopVlanAdminRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are robust to (Robustness Variable-1) packet losses.rw Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.24 |
rlIgmpMldSnoopVlanAdminQueryIntervalThe frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value.rw Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.25 |
rlIgmpMldSnoopVlanAdminQueryMaxResponseTimeThe maximum query response interval advertised in MGMDv2
or v3 queries on this interface.rw Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.26 |
rlIgmpMldSnoopVlanAdminLastMemberQueryIntervalThe Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time between group-specific query messages. This value
may be tuned to modify the leave latency of the network. A
reduced value results in reduced time to detect the loss of
the last member of a group. The value of this object is
irrelevant if mgmdRouterInterfaceVersion is 1.rw Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.27 |
rlIgmpMldSnoopVlanAdminLastMemberQueryCountRepresents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness }rw Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.28 |
rlIgmpMldSnoopVlanAdminStartupQueryIntervalThis variable represents the interval between General
Queries sent by a Querier on startup.rw Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.29 |
rlIgmpMldSnoopVlanAdminStartupQueryCountRepresents the number of Queries sent out on startup
separated by the Startup Query Interval.rw Unsigned32 .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.30 |
rlIgmpMldSnoopVlanAdminHostTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMldSnoopVlanAdminQueryInterval +
rlIgmpMldSnoopVlanAdminQueryMaxResponseTime }rwobsolete Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.31 |
rlIgmpMldSnoopVlanAdminRouterTimeOutThe amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMldSnoopVlanAdminQueryInterval }rwobsolete Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.32 |
rlIgmpMldSnoopVlanAdminLeaveTimeOutThe amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
DEFVAL { rlIgmpMldSnoopVlanAdminLastMemberQueryCount *
rlIgmpMldSnoopVlanAdminLastMemberQueryInterval }rwobsolete Unsigned32 (0 .. 2147483647 ) UNITS "milliseconds" .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.33 |
rlIgmpMldSnoopVlanIsImmediateLeaveEnable/Disable immediate leave on this Vlanrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.34 |
rlIgmpMldSnoopMulticastTvTablemulticast vlan used for this port SEQUENCE OF RlIgmpMldSnoopMulticastTvEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.6 |
rlIgmpMldSnoopMulticastTvEntryentry of multicast ip RlIgmpMldSnoopMulticastTvEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.6.1 |
rlIgmpMldSnoopMulticastTvInetAddressTypeInet type ipv6/ipv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.1 |
rlIgmpMldSnoopMulticastTvVIDSpecify the multicast ip to be used.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.2 |
rlIgmpMldSnoopMulticastTvGroupAddressTypeInet type ipv6/ipv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.3 |
rlIgmpMldSnoopMulticastTvGroupSpecify the multicast ip to be used.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.4 |
rlIgmpMldSnoopMulticastTvStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.5 |
rlMldSnoopQuerierVlanTableA table that contains MLD Snooping Querier information about
every vlan. This is indexed by vlan tag. SEQUENCE OF RlMldSnoopQuerierVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.7 |
rlMldSnoopQuerierVlanEntryAn entry (conceptual row) in the rlMldSnoopQuerierVlanTable. RlMldSnoopQuerierVlanEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1 |
rlMldSnoopQuerierVlanTagAn MLD Snoop Querier entry vlan tag.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.1 |
rlMldSnoopQuerierAdminEnableThe desired administrative state of MLD Snoop Querier on the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.2 |
rlMldSnoopQuerierOperEnableThe current operational state of MLD Snoop Querier on the vlan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.3 |
rlMldSnoopQuerierAdminAddrInetAddressTypeInet type IPv6/IPv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.4 |
rlMldSnoopQuerierAdminAddrThe desired IP address is being used in MLD Snoop Querier messages on the vlan.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.5 |
rlMldSnoopQuerierOperAddrInetAddressTypeInet type IPv6/IPv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.6 |
rlMldSnoopQuerierOperAddrThe current operational IP address is being used in MLD Snoop Querier messages on the vlan.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.7 |
rlMldSnoopQuerierAdminVersionNumberThe highest version number of MLD Snoop Querier for the vlan.rw MldVersion .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.8 |
rlMldSnoopQuerierOperVersionNumberThe current operational version number of MLD Snoop Querier for the vlan.ro MldVersion .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.9 |
rlMldSnoopQuerierElectionEnableWhether or not to participate in querier election.
When true, the snooping querier participates in querier election.
When false, the snooping querier is the elected querier until a general
query is heard from another router on the vlan (always lose).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.10 |
rlMldSnoopQuerierEnableGlobally enable/disable MLD Snooping Querier in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.55.5.8 |
rlIgmpMldSnoopQuerierGlobalAddressTableA table that contains IGMP/MLD Snooping Querier global address. SEQUENCE OF RlIgmpMldSnoopQuerierGlobalAddressEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.9 |
rlIgmpMldSnoopQuerierGlobalAddressEntryAn entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable. RlIgmpMldSnoopQuerierGlobalAddressEntry .1.3.6.1.4.1.171.10.94.89.89.55.5.9.1 |
rlIgmpMldSnoopQuerierGlobalAddressIPVersionThe IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g., IPv4
and IPv6; however, the traffic is considered to be logically
separate. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.9.1.1 |
rlIgmpMldSnoopQuerierGlobalAddressTypeInet type IPv6/IPv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.9.1.2 |
rlIgmpMldSnoopQuerierGlobalAddressThe desired address to used in IGMP/MLD Snoop Querier messages if
such an address is not configured on the vlan.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.55.5.9.1.3 |