LINKSYS-ippreflist-MIB
Standard SNMP MIB module defining data structures for LINKSYS-ippreflist-MIB.
Imported Objects
Objects
23 total| Object Name |
|---|
rlIpPrefList OBJECT IDENTIFIER .1.3.6.1.4.1.89.212 |
rlIpPrefListTableThe IP Prefix List table. SEQUENCE OF RlIpPrefListEntry .1.3.6.1.4.1.89.212.1 |
rlIpPrefListEntryAn entry in the rlIpPrefListTable. RlIpPrefListEntry .1.3.6.1.4.1.89.212.1.1 |
rlIpPrefListTypePrefix List Type. RlIpPrefListType .1.3.6.1.4.1.89.212.1.1.1 |
rlIpPrefListNamePrefix List Name. DisplayString .1.3.6.1.4.1.89.212.1.1.2 |
rlIpPrefListEntryIndexEntry Index for specific prefix list. Unsigned32 .1.3.6.1.4.1.89.212.1.1.3 |
rlIpPrefListEntryTypePrefix list entry type.rw RlIpPrefListEntryType .1.3.6.1.4.1.89.212.1.1.4 |
rlIpPrefListInetAddrTypeThe address type of rlIpPrefListIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.212.1.1.5 |
rlIpPrefListInetAddrIP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.212.1.1.6 |
rlIpPrefListPrefixLengthThe prefix list can be a number from 0 to 32 for IPv4 address
and from 0 to 128 for IPv6 address.rw INTEGER .1.3.6.1.4.1.89.212.1.1.7 |
rlIpPrefListActionDrop or permit action for a matching condition.rw RlIpPrefListActionType .1.3.6.1.4.1.89.212.1.1.8 |
rlIpPrefListGeLengthSpecifies the lesser value of a range by applying the ge-length argument
to the specified range. ge-length repesents the minimum prefix length to be matched.rw INTEGER .1.3.6.1.4.1.89.212.1.1.9 |
rlIpPrefListLeLengthSpecifies the greater value of a range by applying the ge-length argument
to the specified range. le-length repesents the maximum prefix length to be matched.rw INTEGER .1.3.6.1.4.1.89.212.1.1.10 |
rlIpPrefListDescriptionPrefix List Name.rw DisplayString .1.3.6.1.4.1.89.212.1.1.11 |
rlIpPrefListHitCountMatch counter. INTEGER .1.3.6.1.4.1.89.212.1.1.12 |
rlIpPrefListRowStatusRow status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.212.1.1.13 |
rlIpPrefListInfoTableThe IP Prefix List Info table. SEQUENCE OF RlIpPrefListInfoEntry .1.3.6.1.4.1.89.212.2 |
rlIpPrefListInfoEntryAn entry in the rlIpPrefListInfoTable. RlIpPrefListInfoEntry .1.3.6.1.4.1.89.212.2.1 |
rlIpPrefListInfoTypePrefix List Type. RlIpPrefListType .1.3.6.1.4.1.89.212.2.1.1 |
rlIpPrefListInfoNamePrefix List Name. DisplayString .1.3.6.1.4.1.89.212.2.1.2 |
rlIpPrefListInfoEntriesNumberNumber of entries for specific prefix list.ro INTEGER .1.3.6.1.4.1.89.212.2.1.3 |
rlIpPrefListInfoRangeEntriesNumber of entries with range for specific prefix list.ro INTEGER .1.3.6.1.4.1.89.212.2.1.4 |
rlIpPrefListInfoNextFreeIndexNext free index for specific prefix list.ro INTEGER .1.3.6.1.4.1.89.212.2.1.5 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.