LINKSYS-MAC-BASE-PRIO
Standard SNMP MIB module defining data structures for LINKSYS-MAC-BASE-PRIO.
Imported Objects
Objects
23 total| Object Name |
|---|
rlMacBasePrio OBJECT IDENTIFIER .1.3.6.1.4.1.89.101 |
IMPORTS Unknown .1.3.6.1.4.1.89.101 |
rlMacBasePrioMibVersionIndicates the snmp support version that is supported by
this device.ro INTEGER .1.3.6.1.4.1.89.101.1 |
rlMacBasePrioSupportindicates which features of the max base prio
are supported:
(bit 0 is the most significant bit)
bit 0 - ForceL3Cos
bit 1 - SADA_TCro OCTET STRING .1.3.6.1.4.1.89.101.2 |
rlMacBasePrioForceL3CosEnableThis variable controlls the activation of ForceL3Cos feature in Mac base
priorityrw Enumeration .1.3.6.1.4.1.89.101.3 |
rlMacBasePrioForceL3CosTableA table that contains information about ranges
of addresses that are used in the mac based ptiority
with the ForceL3Cos feature. SEQUENCE OF RlMacBasePrioForceL3CosEntry .1.3.6.1.4.1.89.101.4 |
rlMacBasePrioForceL3CosEntryInformation about ranges of MAC addresses
that are used in the mac based priority with
the ForeL3Cos feature RlMacBasePrioForceL3CosEntry .1.3.6.1.4.1.89.101.4.1 |
rlMacBasePrioForceL3CosAddressThe range of address of this entry.
The range may not hold MAC multicast addresses.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.101.4.1.1 |
rlMacBasePrioForceL3CosMaskIndicate the mask to be logical-ANDed with the
learned address before being compared to
the value in the rlMacBasePrioForceL3CosAddress field.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.101.4.1.2 |
rlMacBasePrioForceL3CosRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.101.4.1.3 |
rlMacBasePrioForceL3CosParamsTableThe table holds the global parameters of
the L3 cos :TC, UP,DSCP. SEQUENCE OF RlMacBasePrioForceL3CosParamsEntry .1.3.6.1.4.1.89.101.5 |
rlMacBasePrioForceL3CosParamsEntry RlMacBasePrioForceL3CosParamsEntry .1.3.6.1.4.1.89.101.5.1 |
rlMacBasePrioForceL3CosParamsEntryIndexIndex of the ForceL3Cos parameters table.rw INTEGER .1.3.6.1.4.1.89.101.5.1.1 |
rlMacBasePrioForceL3CosParamsEntryTCThe value of the globla TCrw INTEGER .1.3.6.1.4.1.89.101.5.1.2 |
rlMacBasePrioForceL3CosParamsEntryUPThe value of the globla UPrw INTEGER .1.3.6.1.4.1.89.101.5.1.3 |
rlMacBasePrioForceL3CosParamsEntryDSCPThe value of the globla DSCPrw INTEGER .1.3.6.1.4.1.89.101.5.1.4 |
rlMacBasePrioSADATCEnableThis variable controlls the activation of SA/DA priority feature in Mac base
priorityrw Enumeration .1.3.6.1.4.1.89.101.6 |
rlMacBasePrioSADATCTableA table that contains information about ranges
of addresses that are used in the mac based ptiority
with the ForceL3Cos feature. SEQUENCE OF RlMacBasePrioSADATCEntry .1.3.6.1.4.1.89.101.7 |
rlMacBasePrioSADATCEntryInformation about ranges of MAC addresses
that are used in the mac based priority with
the ForeL3Cos feature RlMacBasePrioSADATCEntry .1.3.6.1.4.1.89.101.7.1 |
rlMacBasePrioSADATCAddressThe range of address of this entry.
The range may not hold MAC multicast addresses.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.101.7.1.1 |
rlMacBasePrioSADATCMaskIndicate the mask to be logical-ANDed with the
learned address before being compared to
the value in the rlMacBasePrioSADATCAddress field.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.101.7.1.2 |
rlMacBasePrioSADATCPrioThe priority that will assign to all MAC
addresses that are match the range of this entry.rw INTEGER .1.3.6.1.4.1.89.101.7.1.3 |
rlMacBasePrioSADATCRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.101.7.1.4 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.