LINKSYS-BONJOUR-MIB
AI MIB Summary
The LINKSYS-BONJOUR-MIB enables monitoring of Linksys hardware devices for Bonjour (mDNS) service discovery events, including active service advertisements, host resolution counts, and protocol state transitions. This private module facilitates the tracking of local network service availability and client-server interaction metrics specific to Linksys's implementation of the zero-configuration networking protocol.
The private MIB module definition for Bonjour protocol.
Main OID:
rlBonjour.1.3.6.1.4.1.89.114
22
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
rlBonjourThe private MIB module definition for Bonjour protocol. MODULE-IDENTITY .1.3.6.1.4.1.89.114 |
IMPORTSThe private MIB module definition for Bonjour protocol. Unknown .1.3.6.1.4.1.89.114 |
rlBonjourPublishEnables or disables Bonjour publishing.rw Enumeration .1.3.6.1.4.1.89.114.1 |
rlBonjourStatusTableThe table listing the service bonjour status per service and IP interface.
In order to keep the table sorted according to the customary lexicographical
order of the rlBonjourStatusServiceName strings, rlBonjourStatusServiceName
will be padded with blanks. Bonjour will truncate the padded blanks when advertising this service name.
Using this MIB user can monitor actual state of a service on an IP interface SEQUENCE OF RlBonjourStatusEntry .1.3.6.1.4.1.89.114.2 |
rlBonjourStatusEntryAn entry in the rlBonjourStatusEntry. RlBonjourStatusEntry .1.3.6.1.4.1.89.114.2.1 |
rlBonjourStatusServiceNameThis variable identifies the service name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.114.2.1.1 |
rlBonjourStatusIPInterfaceTypeThis variable indicates the type of the IP interface
on which the Bonjour service should be published. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.114.2.1.2 |
rlBonjourStatusIPInterfaceAddrThis variable indicates the address of the IP interface
on which the Bonjour service should be published. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.114.2.1.3 |
rlBonjourStatusStateThis variable identifies the service state on IP interface of the device.ro RlBonjourServiceState .1.3.6.1.4.1.89.114.2.1.4 |
rlBonjourStateTableThe table listing the service bonjour state per service and L2 interface.
The services that are displayed here are only those who are supported per project.
The L2 interfaces that are displayed here are either:
L2 interfaces with an IP on it
OR
L2 interfaces listed in the table below
Per each pair (service and L2 interface) table displays:
state :
UP - Bonjour published the service on this L2 interface
Not-exclude - the L2 interface has IP address (L2 interface is in UP state)
AND rlBonjourL2Table is empty
AND rlBonjourL2Mode is disable
include - the L2 interfaces are listed in the table rlBonjourL2Table
AND rlBonjourL2Mode is enabled
Down - Bonjour sent goodbye packets regarding this service on this L2 interface
exclude - the L2 interface is a member of the rlBonjourL2Table
AND rlBonjourL2Mode is disable
Not-Include - rlBonjourL2Table is empty
AND rlBonjourL2Mode is enable
service disabled - service was removed ue to specific request from L1 manager
No IP address - the L2 interfaces is listed in the table rlBonjourL2EnableTable
BUT don't have an IP on it
Not-present - the L2 interfaces is listed in the table rlBonjourL2EnableTable
BUT no yet defined (like vlan not created or port in an unconnected salve)
Bonjour disabled - rlBonjourPublish scalar is off
Using this MIB user can monitor actual state of a service on an IP interface SEQUENCE OF RlBonjourStateEntry .1.3.6.1.4.1.89.114.3 |
rlBonjourStateEntryAn entry in the rlBonjourStatusEntry. RlBonjourStateEntry .1.3.6.1.4.1.89.114.3.1 |
rlBonjourStateServiceNameThis variable identifies the service name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.114.3.1.1 |
rlBonjourStateL2InterfaceThis variable indicates the L2 interface
on which the Bonjour service should be published. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.114.3.1.2 |
rlBonjourStateOperationModeThis variable indicates wether Bonjour is operational on the pair (service + L2 interface).ro RlBonjourOperationState .1.3.6.1.4.1.89.114.3.1.3 |
rlBonjourStateOperationReasonThis variable specifies the reason of the previous field: rlBonjourStateOperationMode.ro RlBonjourOperationReason .1.3.6.1.4.1.89.114.3.1.4 |
rlBonjourL2TableThe table listing the L2 interfaces on which the user wishes to
enable OR disable Bonjour with respect to rlBonjourL2Mode.
If rlBonjourL2Mode is set to include AND L2 interface is in this table
it does not ensure Bonjour WILL publish services on it.
Publication is also dependent on these fundemental conditions:
rlBonjourPublish must be on
at least one service should be enabled
L2 must be present and UP
have at least one IP on it
If this table is empty AND rlBonjourL2Mode is set to include
Bonjour won't operate at all.
If rlBonjourL2Mode is set to exclude, and rlBonjourL2Table is empty
Bonjour will be published on ALL L2 interfaces answering to the
fundemental conditions specified above.
If rlBonjourL2Table is NOT empty then Bonjour will operate on
ALL L2 interfaces answering to the fundemental conditions specified
above BUT NOT members of this list. SEQUENCE OF RlBonjourL2Entry .1.3.6.1.4.1.89.114.4 |
rlBonjourL2EntryAn entry in the rlBonjourL2Entry. RlBonjourL2Entry .1.3.6.1.4.1.89.114.4.1 |
rlBonjourL2IfindexThis variable identifies the L2 interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.114.4.1.1 |
rlBonjourL2RowStatusThis variable identifies the L2 interface status manager.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.114.4.1.2 |
rlBonjourL2Modespecify whether the L2 interfaces listed in rlBonjourL2Table
means include bonjour on these L2 interfaces once they:
rlBonjourPublish must be on
at least one service should be enabled
L2 must be present and UP
have at least one IP on it
OR exclude bonjour on these L2 interfaces even if they answer to
all the conditions above.rw Enumeration .1.3.6.1.4.1.89.114.5 |
rlBonjourInstanceNameInstance Name is given to Bonjour driver by the project part (L1Manager)
When a conflict occurs: found another station with the same instance name.
Bonjour driver is required to append _m to the given name
while m is an incremental integer, increasing on each conflictro INTEGER .1.3.6.1.4.1.89.114.6 |
rlBonjourHostNameHost Name is given to Bonjour driver by the project part (L1Manager)
When a conflict occurs: found another station with the same host name.
Bonjour driver is required to append _m to the given name
while m is an incremental integer, increasing on each conflictro INTEGER .1.3.6.1.4.1.89.114.7 |