LINKSYS-AAA
The private MIB module definition for Authentication, Authorization and Accounting in Linksys devices.
Main OID:
rlAAA.1.3.6.1.4.1.89.79
299
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
299 total| Object Name |
|---|
rlAAAThe private MIB module definition for Authentication, Authorization and Accounting
in Linksys devices. MODULE-IDENTITY .1.3.6.1.4.1.89.79 |
rlAAAMibVersionMIB's version, the current version is 3. The difference in rlAAACreationDateSystemPasswordLevel15 and
rlAAALocalUserEntry.ro INTEGER .1.3.6.1.4.1.89.79.1 |
rlAAARetriesDetermines the number of retries for each method
(Radius, local passwords, local users table and
tacacs).rw INTEGER .1.3.6.1.4.1.89.79.2 |
rlAAARadiusEnabledSpecifies whether AAA will use Radius. When to use
Radius exactly depends on its position in the
methods list.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.3 |
rlAAATacacsEnabledSpecifies whether AAA will use Tacacs. When to use
Tacacs exactly depends on its position in the
methods list.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.4 |
rlAAALocalUserEnabledSpecifies whether AAA will use the local users table.
When to use the table exactly depends on its
position in the methods list.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.5 |
rlAAASystemPasswordEnabledSpecifies whether AAA will use the system password.
When to use the passwords exactly depends on its
position in the methods list.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.6 |
rlAAALinePasswordEnabledSpecifies whether AAA will use the line password.
When to use the passwords exactly depends on its
position in the methods list.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.7 |
rlAAAAlwaysSuccessEnabledSpecifies whether AAA will use the always success method.
When to use that method exactly depends on its
position in the methods list.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.8 |
rlAAARadiusSupportedThis mib show whether Radius is supported in AAA. If the
value is false Radius will not be used as an
authentication and accounting method. If the value
is true Radius will be used by AAA for authentication and
accounting if the the AAA was configured to do so
(by setting the appropriate mibs).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.9 |
rlAAATacacsSupportedThis mib show whether Tacacs+ is supported in AAA. If the
value is false Tacacs+ will not be used as an
authentication and accounting method. If the value
is true Tacacs+ will be used by AAA for authentication and
accounting if the the AAA was configured to do so
(by setting the appropriate mibs).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.10 |
rlAAALocalUserSupportedThis mib show whether the local users db is supported in
AAA.If the value is false the local users db will not be
used as an authentication and accounting method. If the
value is true the local users db will be used by AAA for
authentication and accounting method if the the AAA was
configured to do so (by setting the appropriate mibs).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.11 |
rlAAASystemPasswordSupportedThis mib show whether system password is supported in AAA.
If the value is false system password will not be used as
an authentication and accounting method. If the value is
true the system password will be used by AAA for
authentication and accounting method if the the AAA was
configured to do so (by setting the appropriate mibs).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.12 |
rlAAALinePasswordSupportedThis mib show whether line password is supported in AAA.
If the value is false line password will not be used as an
authentication and accounting method. If the value is true
the line password will be used by AAA for authentication and
accounting method if the the AAA was configured
to do so (by setting the appropriate mibs).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.13 |
rlAAALineAlwaysSuccessSupportedThis mib show whether line always success method is
supported in AAA.If the value is false always success
method will not be used as an authentication and
accounting method. If the value is true the always
success method will be used by AAA for authentication and
accounting method if the the AAA was configured
to do so (by setting the appropriate mibs).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.14 |
rlAAAMethodListTableThe table specifies all methods list per method name. SEQUENCE OF RlAAAMethodListEntry .1.3.6.1.4.1.89.79.15 |
rlAAAMethodListEntryThe row definition for this table. RlAAAMethodListEntry .1.3.6.1.4.1.89.79.15.1 |
rlAAAMethodListNameLine Method List Namerw DisplayString .1.3.6.1.4.1.89.79.15.1.1 |
rlAAAMethodType1first method type that will be used in the method
linked list.rw RlAAAMethodtype .1.3.6.1.4.1.89.79.15.1.2 |
rlAAAMethodType2second method type that will be used in the method
linked list.rw RlAAAMethodtype .1.3.6.1.4.1.89.79.15.1.3 |
rlAAAMethodType33th method type that will be used in the method
linked list.rw RlAAAMethodtype .1.3.6.1.4.1.89.79.15.1.4 |
rlAAAMethodType44th method type that will be used in the method
linked list.rw RlAAAMethodtype .1.3.6.1.4.1.89.79.15.1.5 |
rlAAAMethodType55th method type that will be used in the method
linked list.rw RlAAAMethodtype .1.3.6.1.4.1.89.79.15.1.6 |
rlAAAMethodType66th method type that will be used in the method
linked list.rw RlAAAMethodtype .1.3.6.1.4.1.89.79.15.1.7 |
rlAAAMethodType77th method type that will be used in the method
linked list.rw RlAAAMethodtype .1.3.6.1.4.1.89.79.15.1.8 |
rlAAAMethodListStatusmethod list status can be destroy or createAndGorw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.79.15.1.9 |
rlAAALineTableThe table specifies all lines, their passwords and their
authorizations level .the table ordered lexicography by
the line name. when a new line is being authenticate the
search in line table is from the first entry in table
till it find the first entry that fit application input
line parameters . SEQUENCE OF RlAAALineEntry .1.3.6.1.4.1.89.79.16 |
rlAAALineEntryThe row definition for this table. RlAAALineEntry .1.3.6.1.4.1.89.79.16.1 |
rlAAALinePortTypethe physical port type .rw RlAAALinePortType .1.3.6.1.4.1.89.79.16.1.1 |
rlAAAIfIndexIdentifies the ifindex for which this entry can be used.
If index 0 means don't care (can be used for all if indices).
For port type console the value could be only 0.rw Unsigned32 .1.3.6.1.4.1.89.79.16.1.2 |
rlAAAServiceTypethe service typerw RlAAAServiceType .1.3.6.1.4.1.89.79.16.1.3 |
rlAAALineMethodListNameLevel1Method list Name for level 1 .That name points to the method
list table .It is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.4 |
rlAAALineMethodListNameLevel2Method list Name for level 2 that name points to the method
list table it is the key in method list table .by that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.5 |
rlAAALineMethodListNameLevel3Method list Name for level 3 that name points to the method
list table it is the key in method list table .by that way
we can reach the methods list to be used for this linerw DisplayString .1.3.6.1.4.1.89.79.16.1.6 |
rlAAALineMethodListNameLevel4Method list Name for level 4-that name points to the method
list table it is the key in method list table .by that way
we can reach the methods list to be used for this linerw DisplayString .1.3.6.1.4.1.89.79.16.1.7 |
rlAAALineMethodListNameLevel5Method list Name for level 5 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.8 |
rlAAALineMethodListNameLevel6Method list Name for level 6 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.9 |
rlAAALineMethodListNameLevel7Method list Name for level 7 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.10 |
rlAAALineMethodListNameLevel8Method list Name for level 8 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.11 |
rlAAALineMethodListNameLevel9Method list Name for level 9 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.12 |
rlAAALineMethodListNameLevel10Method list Name for level 10 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.13 |
rlAAALineMethodListNameLevel11Method list Name for level 11 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.14 |
rlAAALineMethodListNameLevel12Method list Name for level 12 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.15 |
rlAAALineMethodListNameLevel13Method list Name for level 13 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.16 |
rlAAALineMethodListNameLevel14Method list Name for level 14 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.17 |
rlAAALineMethodListNameLevel15Method list Name for level 15 that name points to the method
list table it is the key in method list table .in that way
we can reach the methods list to be used for that linerw DisplayString .1.3.6.1.4.1.89.79.16.1.18 |
rlAAALinePasswordLine Password. Zero length password is considered as no
password. Password with zero length means that in case this
password is the method to be used a method fail is returned
and no other method is being used.
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.16.1.19 |
rlAAALineStatusLine status can be destroy or createAndGorw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.79.16.1.20 |
rlAAALineLockedStateLine locked statusro Enumeration .1.3.6.1.4.1.89.79.16.1.21 |
rlAAALineConsFailedLoginsNumber of last consecutive failed loginsro Counter32 .1.3.6.1.4.1.89.79.16.1.22 |
rlAAALinePasswordValidTimeThe period of time in days, during which the password,
is considered valid for login. Value of 0 means never expired.
The actual range is product specific.
After this time the system may allow limited number of logins
to change the password.rw Unsigned32 .1.3.6.1.4.1.89.79.16.1.23 |
rlAAALinePasswordExpieryDateIf Line password aging is active, the date on which
The current password will expire.
Otherwise zero size stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.16.1.24 |
rlAAALocalUserTableThe table specifies all usernames, their passwords and
their authorizations. SEQUENCE OF RlAAALocalUserEntry .1.3.6.1.4.1.89.79.17 |
rlAAALocalUserEntryThe row definition for this table. RlAAALocalUserEntry .1.3.6.1.4.1.89.79.17.1 |
rlAAALocalUserNameLocal User Namerw DisplayString .1.3.6.1.4.1.89.79.17.1.1 |
rlAAALocalUserPasswordLocal User Password .The password can be null
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.17.1.2 |
rlAAALocalUserPrivilageLocal User Privilagerw INTEGER .1.3.6.1.4.1.89.79.17.1.3 |
rlAAALocalHostStatusLocal User statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.79.17.1.4 |
rlAAALocalLockedStateLocal User locked statusro Enumeration .1.3.6.1.4.1.89.79.17.1.5 |
rlAAALocalConsFailedLoginsNumber of last consecutive failed loginsro Counter32 .1.3.6.1.4.1.89.79.17.1.6 |
rlAAALocalPasswordValidTimeThe period of time in days, during which the password,
is considered valid for login. Value of 0 means never expired.
The actual range is product specific.
After this time the system may allow limited number of logins
to change the password.rw Unsigned32 .1.3.6.1.4.1.89.79.17.1.7 |
rlAAALocalPasswordExpieryDateIf User password aging is active, the date on which
The current password will expire.
Otherwise zero size stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.17.1.8 |
rlAAALocalPasswordCreationDateThe date on which the current password was created.
Otherwise zero size stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.17.1.9 |
rlAAASystemPasswordlevel1system Password for level 1.
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.18 |
rlAAASystemPasswordlevel2system Password for level 2
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.19 |
rlAAASystemPasswordlevel3system Password for level 3
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.20 |
rlAAASystemPasswordlevel4system Password for level 4
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.21 |
rlAAASystemPasswordlevel5system Password for level 5
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.22 |
rlAAASystemPasswordlevel6system Password for level 6
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.23 |
rlAAASystemPasswordlevel7system Password for level 7
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.24 |
rlAAASystemPasswordlevel8system Password for level 8
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.25 |
rlAAASystemPasswordlevel9system Password for level 9
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.26 |
rlAAASystemPasswordlevel10system Password for level 10
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.27 |
rlAAASystemPasswordlevel11system Password for level 11
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.28 |
rlAAASystemPasswordlevel12system Password for level 12
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.29 |
rlAAASystemPasswordlevel13system Password for level 13
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.30 |
rlAAASystemPasswordlevel14system Password for level 14
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not not part of itrw DisplayString .1.3.6.1.4.1.89.79.31 |
rlAAASystemPasswordlevel15system Password for level 15
allowed formats:
a. Display string starting with '$' for clear text
b. Encrypted password: starts with # sign followed by 32
octets representing Hex Decimal value(in the 0-9 a-f A-F
range)
the $ and # as first octet are a directive to indicate what
is the type of password and are not part of itrw DisplayString .1.3.6.1.4.1.89.79.32 |
rlAAAUserTableThe table holds all current users that have been authenticated. SEQUENCE OF RlAAAUserEntry .1.3.6.1.4.1.89.79.33 |
rlAAAUserEntryThe row definition for this table. RlAAAUserEntry .1.3.6.1.4.1.89.79.33.1 |
rlAAAUserIndexUser Index Unsigned32 .1.3.6.1.4.1.89.79.33.1.1 |
rlAAAUserServiceTypeThe service that the user uses. Service dont care is console
terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.33.1.2 |
rlAAAUserRemoteIpAddressUser remote IP address.ro IpAddress .1.3.6.1.4.1.89.79.33.1.3 |
rlAAAUserNameUser Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.33.1.4 |
rlAAAUserLevelUser levelro Unsigned32 .1.3.6.1.4.1.89.79.33.1.5 |
rlAAAUserIfIndexUser if index.ro Unsigned32 .1.3.6.1.4.1.89.79.33.1.6 |
rlAAAUserLoginDateDate of use creation.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.89.79.33.1.7 |
rlAAAUserLoginDurationMSTime in MS since user login.ro Unsigned32 .1.3.6.1.4.1.89.79.33.1.8 |
rlAAATest OBJECT IDENTIFIER .1.3.6.1.4.1.89.79.34 |
rlAAATestPasswordThis variable enables the user supplying the correct code to use the
AAA test feature.rw INTEGER .1.3.6.1.4.1.89.79.34.1 |
rlAAATestUserTableThis table enables a user to perform a simulation of authentiction. SEQUENCE OF RlAAATestUserEntry .1.3.6.1.4.1.89.79.34.2 |
rlAAATestUserEntryThe row definition for this table. RlAAATestUserEntry .1.3.6.1.4.1.89.79.34.2.1 |
rlAAATestUserIndexUser entry index (the number is used just to identify the user).rw Unsigned32 .1.3.6.1.4.1.89.79.34.2.1.1 |
rlAAATestPortTypethe physical port type .rw RlAAALinePortType .1.3.6.1.4.1.89.79.34.2.1.2 |
rlAAATestIfIndexline ifIndex can configue to be zero witch means
Don't-care valuerw INTEGER .1.3.6.1.4.1.89.79.34.2.1.3 |
rlAAATestServiceTypethe service typerw RlAAAServiceType .1.3.6.1.4.1.89.79.34.2.1.4 |
rlAAATestUserAuthenticationStatusShows the ststus of the operation and what is expected from the
'user'.ro Enumeration .1.3.6.1.4.1.89.79.34.2.1.5 |
rlAAATestUserAuthenticationActionBy setting this field the process moves from one state to another. On
creation the value must be begin.
When the value of rlAAATestUserAuthenticationStatus is needPassword
the value can be set to receivePassword or abort.
When the value of rlAAATestUserAuthenticationStatus is needUsername
the value can be set to receiveUsername or abort.
When the value of rlAAATestUserAuthenticationStatus is success or failure
the value can be set to delete or abort.
When the value of rlAAATestUserAuthenticationStatus is aborted the value
can be set to delete.
When the value of rlAAATestUserAuthenticationStatus is deleted the value
can not be set to any value.
When the value of rlAAATestUserAuthenticationStatus is waiting the value
can be set or abort.rw Enumeration .1.3.6.1.4.1.89.79.34.2.1.6 |
rlAAATestUserInputIf the acion was set to receivePassword than this field should hold
the value of the password.
If the action was set to receiveUsername than this field should hold
the value of the username.rw DisplayString .1.3.6.1.4.1.89.79.34.2.1.7 |
rlAAATestUserStatusEntry status. The entry can not be deleted. It will be deleted if
unchanged more than 2 minutes.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.79.34.2.1.8 |
rlTacacs OBJECT IDENTIFIER .1.3.6.1.4.1.89.79.40 |
rlTacacsMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.79.40.1 |
rlTacacsGlobalDefaultTimeoutThe maximum time (in seconds) to wait for TACACS+
server to reply. This MIB is used if the value of the
field rlTacacsServerTimeout is 0.rw INTEGER .1.3.6.1.4.1.89.79.40.2 |
rlTacacsGlobalDefaultKeySecret key to be shared with TACACS+ server. This MIB is
used if the value of the field rlTacacsServerUseGlobalDefaultKey
is false.rw DisplayString .1.3.6.1.4.1.89.79.40.3 |
rlTacacsGlobalDefaultSourceIpInterfaceIP address of the interface to use with TACACS+ server.
A value of 0.0.0.0 for this object disables source
address specification. This MIB is used if the value of the
field rlTacacsServerSource is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.89.79.40.6 |
rlTacacsServerTableThe (conceptual) table listing the TACACS+
servers with which the cliient shares a secret. SEQUENCE OF RlTacacsServerEntry .1.3.6.1.4.1.89.79.40.7 |
rlTacacsServerEntryAn entry (conceptual row) representing a TACACS+
server with which the client shares
a secret. RlTacacsServerEntry .1.3.6.1.4.1.89.79.40.7.1 |
rlTacacsServerAddressThe IP address of the TACACS+ server
referred to in this table entry.rw IpAddress .1.3.6.1.4.1.89.79.40.7.1.1 |
rlTacacsServerPortNumberThe TCP port the client establishes connections with this server.rw INTEGER .1.3.6.1.4.1.89.79.40.7.1.2 |
rlTacacsServerConnectionTypeSpecifies TCP connection type between device and TACACS+ server.
Either a single open connection between device and server
(rlTacacsSingleConnection), or open/close connection per
communication session (rlTacacsPerSessionConnection).rw RlTacacsConnectionType .1.3.6.1.4.1.89.79.40.7.1.3 |
rlTacacsServerConnectionStatusSpecifies status TCP connection type between device and TACACS+ server.ro RlTacacsConnectionStatus .1.3.6.1.4.1.89.79.40.7.1.4 |
rlTacacsServerTimeoutThe maximum time (in seconds) to wait for this TACACS+ server to reply.
Value of 0 means that rlTacacsGlobalDefaultTimeout value is used.rw INTEGER .1.3.6.1.4.1.89.79.40.7.1.5 |
rlTacacsServerUseGlobalDefaultKeyIf this field is set to true the value in field rlTacacsServerKey
is ignored and instead the value in the MIB
rlTacacsGlobalDefaultKey is used. Otherwise the value in
rlTacacsServerKey is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.40.7.1.6 |
rlTacacsServerKeySecret key to be shared with this TACACS+ server.rw DisplayString .1.3.6.1.4.1.89.79.40.7.1.7 |
rlTacacsServerSourceIpInterfaceIP address of the interface to use with this server.
A value of 0.0.0.0 for this object disables source
address specification. Value of 255.255.255.255 means that
rlTacacsGlobalDefaultSourceIpInterface will be used.rw IpAddress .1.3.6.1.4.1.89.79.40.7.1.8 |
rlTacacsServerPriorityDetermines the order in which the TACACS+ servers will be used,
when 0 is the highest priority. If more than one server share the
same priority - they will be used in lexicgoraphic order
(the order of entries in this table).rw INTEGER .1.3.6.1.4.1.89.79.40.7.1.9 |
rlTacacsServerRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.79.40.7.1.10 |
rlTacacsGlobalDefaultSourceIPv6InterfaceIP address of the interface to use with TACACS+ server.
A NULL for this object disables source
address specification. This MIB is used if the value of the
field rlTacacsServerInetSourceInterface is 255.255.255.255.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.40.8 |
rlTacacsServerInetTableThe (conceptual) table listing the TACACS+
servers with which the cliient shares a secret. SEQUENCE OF RlTacacsServerInetEntry .1.3.6.1.4.1.89.79.40.9 |
rlTacacsServerInetEntryAn entry (conceptual row) representing a TACACS+
server with which the client shares
a secret. RlTacacsServerInetEntry .1.3.6.1.4.1.89.79.40.9.1 |
rlTacacsServerInetAddressTypeThe Inet address type of TACACS+ server reffered to
in this table entry .IPv6Z type is not supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.40.9.1.1 |
rlTacacsServerInetAddressThe Inet Address address of the TACACS+ server
referred to in this table entry.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.40.9.1.2 |
rlTacacsServerInetPortNumberThe TCP port the client establishes connections with this server.rw INTEGER .1.3.6.1.4.1.89.79.40.9.1.3 |
rlTacacsServerInetConnectionTypeSpecifies TCP connection type between device and TACACS+ server.
Either a single open connection between device and server
(rlTacacsSingleConnection), or open/close connection per
communication session (rlTacacsPerSessionConnection).rw RlTacacsConnectionType .1.3.6.1.4.1.89.79.40.9.1.4 |
rlTacacsServerInetConnectionStatusSpecifies status TCP connection type between device and TACACS+ server.ro RlTacacsConnectionStatus .1.3.6.1.4.1.89.79.40.9.1.5 |
rlTacacsServerInetTimeoutThe maximum time (in seconds) to wait for this TACACS+ server to reply.
Value of 0 means that rlTacacsGlobalDefaultTimeout value is used.rw INTEGER .1.3.6.1.4.1.89.79.40.9.1.6 |
rlTacacsServerInetUseGlobalDefaultKeyIf this field is set to true the value in field rlTacacsServerKey
is ignored and instead the value in the MIB
rlTacacsGlobalDefaultKey is used. Otherwise the value in
rlTacacsServerKey is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.40.9.1.7 |
rlTacacsServerInetKeySecret key to be shared with this TACACS+ server.rw DisplayString .1.3.6.1.4.1.89.79.40.9.1.8 |
rlTacacsServerInetSourceInterfaceTypeThe Inet address type of the interface to use with this server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.40.9.1.9 |
rlTacacsServerInetSourceInterfaceInet address of the interface to use with this server.
A value of NULL for this object disables source
address specification for this server.
A value of 255.255.255.255 maens that the global default
rlTacacsGlobalDefaultSourceIpInterface or
rlTacacsGlobalDefaultSourceIPv6Interface values are used.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.40.9.1.10 |
rlTacacsServerInetPriorityDetermines the order in which the TACACS+ servers will be used,
when 0 is the highest priority. If more than one server share the
same priority - they will be used in lexicgoraphic order
(the order of entries in this table).rw INTEGER .1.3.6.1.4.1.89.79.40.9.1.11 |
rlTacacsServerInetRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.79.40.9.1.12 |
rlAAAAuditingEnableControls whether SysLog messages
should be issued on login eventsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.41 |
rlAAAMinPasswordLengthThe minimum length of password for local user authentication
defined in field rlAAALocalUserPassword in rlAAALocalUserTable.
The value applies only to new or updated user passwords.
In actual implementation the range may be reduced to (0 | N-64),
where N is a platform dependent (for TIC compatibility N=8)rw INTEGER .1.3.6.1.4.1.89.79.42 |
rlAAAPasswordHistSizeThe number of most recent password,
previously defined for Local User Table, Line Table,
System Password Table for specific entity.
This list used for password reusing prevention.
Value of 0 means none. Changing the value
does not cause the loss of history.
History Max size is product specific.rw Unsigned32 .1.3.6.1.4.1.89.79.43 |
rlAAAPasswordHistHoldTimeThe time in day, which an old password
may be used in password history check.
Changing the value does not cause the
loss of history.rw Unsigned32 .1.3.6.1.4.1.89.79.44 |
rlAAASuccLoginWriteToFileControls whether successful logins are
written to login filerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.45 |
rlAAALocalLoginHistTableThe table holds successful login history
for all users. This table is read-only. SEQUENCE OF RlAAALocalLoginHistEntry .1.3.6.1.4.1.89.79.46 |
rlAAALocalLoginHistEntryThe row definition for this table. RlAAALocalLoginHistEntry .1.3.6.1.4.1.89.79.46.1 |
rlAAALocalLoginHistNameUser Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.46.1.1 |
rlAAALocalLoginHistIndexIndex in History for specific user.
Lower number means more recent login. Unsigned32 .1.3.6.1.4.1.89.79.46.1.2 |
rlAAALocalLoginHistServiceTypeThe service that the user uses.
Service don't care is console terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.46.1.3 |
rlAAALocalLoginHistRemoteIpAddressUser remote IP address.ro IpAddress .1.3.6.1.4.1.89.79.46.1.4 |
rlAAALocalLoginHistLocalIpAddresslocal Ip Address on login.ro IpAddress .1.3.6.1.4.1.89.79.46.1.5 |
rlAAALocalLoginDateTimeDate and time in the SysLog Format:
DD-MMM-YYYY HH:MM:SSro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.46.1.6 |
rlAAALocalLoginMridMrid - indicates to which instance the connection was establishedro Unsigned32 .1.3.6.1.4.1.89.79.46.1.7 |
rlAAALinePassLoginHistTableThe table holds successful login history
for Line passwords. This table is read-only. SEQUENCE OF RlAAALinePassLoginHistEntry .1.3.6.1.4.1.89.79.47 |
rlAAALinePassLoginHistEntryThe row definition for this table. RlAAALinePassLoginHistEntry .1.3.6.1.4.1.89.79.47.1 |
rlAAALinePassLoginHistPortTypethe physical port type.rw RlAAALinePortType .1.3.6.1.4.1.89.79.47.1.1 |
rlAAALinePassLoginHistIfIndexIdentifies the ifindex for which this entry can be used.
If index 0 means don't care
(can be used for all if indices).
For port type console the value could be only 0.rw Unsigned32 .1.3.6.1.4.1.89.79.47.1.2 |
rlAAALinePassLoginHistServiceTypethe service typerw RlAAAServiceType .1.3.6.1.4.1.89.79.47.1.3 |
rlAAALinePassLoginHistIndexIndex in History for specific user.
Lower number means more recent login. Unsigned32 .1.3.6.1.4.1.89.79.47.1.4 |
rlAAALinePassLoginHistActServiceTypeThe service that the user uses.
Service don't care is console terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.47.1.5 |
rlAAALinePassLoginHistRemoteIpAddressUser remote IP address.ro IpAddress .1.3.6.1.4.1.89.79.47.1.6 |
rlAAALinePassLoginHistLocalIpAddresslocal Ip Address on login.ro IpAddress .1.3.6.1.4.1.89.79.47.1.7 |
rlAAALinePassLoginDateTimeDate and time in the SysLog Format:
DD-MMM-YYYY HH:MM:SSro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.47.1.8 |
rlAAALinePassLoginMridMrid - indicates to which instance the connection was establishedro Unsigned32 .1.3.6.1.4.1.89.79.47.1.9 |
rlAAASystemLoginHistTableThe table holds successful login history
for system passwords. This table is read-only. SEQUENCE OF RlAAASystemLoginHistEntry .1.3.6.1.4.1.89.79.48 |
rlAAASystemLoginHistEntryThe row definition for this table. RlAAASystemLoginHistEntry .1.3.6.1.4.1.89.79.48.1 |
rlAAASystemLoginHistLevelUser Namero INTEGER .1.3.6.1.4.1.89.79.48.1.1 |
rlAAASystemLoginHistIndexIndex in History for specific user.
Lower number means more recent login. Unsigned32 .1.3.6.1.4.1.89.79.48.1.2 |
rlAAASystemLoginHistServiceTypeThe service that the user uses.
Service don't care is console terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.48.1.3 |
rlAAASystemLoginHistRemoteIpAddressUser remote IP address.ro IpAddress .1.3.6.1.4.1.89.79.48.1.4 |
rlAAASystemLoginHistLocalIpAddresslocal Ip Address on login.ro IpAddress .1.3.6.1.4.1.89.79.48.1.5 |
rlAAASystemLoginDateTimeDate and time in the SysLog Format:
DD-MMM-YYYY HH:MM:SSro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.48.1.6 |
rlAAASystemLoginMridMrid - indicates to which instance the connection was establishedro Unsigned32 .1.3.6.1.4.1.89.79.48.1.7 |
rlAAASysPassStatTableThe table specifies all system password and
their security properties: is password locked
due to wrong password, when and how it was locked
or last unsuccessful login information, expiry date
of the password. SEQUENCE OF RlAAASysPassStatEntry .1.3.6.1.4.1.89.79.49 |
rlAAASysPassStatEntryThe row definition for this table. RlAAASysPassStatEntry .1.3.6.1.4.1.89.79.49.1 |
rlAAASysPassStatLevelSystem password levelro INTEGER .1.3.6.1.4.1.89.79.49.1.1 |
rlAAASysPassStatLockedStateSystem password locked statusro Enumeration .1.3.6.1.4.1.89.79.49.1.2 |
rlAAASysPassStatConsFailedLoginsNumber of last consecutive failed loginsro Counter32 .1.3.6.1.4.1.89.79.49.1.3 |
rlAAASysPassStatPasswordValidTimeThe period of time in days, during which the password,
is considered valid for login. Value of 0 means never expired.
The actual range is product specific.
After this time the system may allow limited number of logins
to change the password.rw Unsigned32 .1.3.6.1.4.1.89.79.49.1.4 |
rlAAASysPassStatPasswordExpieryDateIf System password aging is active, the date,
on which the current password will expire.
Otherwise zero size stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.49.1.5 |
rlAAAMaxNumLogAttmptsThe number of consecutive unsuccessful login attempts
before user is locked. Value of 0 means no limit. The actual range is
product specific. TIC requirement is 3.rw INTEGER .1.3.6.1.4.1.89.79.50 |
rlAAAUnlockUserNameAn action MIB variable setting with value
of Local User Name will unlock this user.
The value of this variable is not saved to
non volatile storage. Read of this variable
always returns zero length display string.rw DisplayString .1.3.6.1.4.1.89.79.51 |
rlAAAUnlockSystemPasswordAn action MIB variable setting with value
of Level will unlock the system password
for this level. The value of this variable
is not saved to non volatile storage.
Read of this variable always returns zero.
Zero (0) does no action.rw INTEGER .1.3.6.1.4.1.89.79.52 |
rlAAALockedLineTableThe table specifies lines statuses.
Users cannot access the product from
remote based on a password of the locked line.
This table enables to unlock lines. SEQUENCE OF RlAAALockedLineEntry .1.3.6.1.4.1.89.79.53 |
rlAAALockedLineEntryThe row definition for this table. RlAAALockedLineEntry .1.3.6.1.4.1.89.79.53.1 |
rlAAALockedLinePortTypethe physical port type .rw RlAAALinePortType .1.3.6.1.4.1.89.79.53.1.1 |
rlAAALockedLineIfIndexIdentifies the ifindex for which this entry can be used.
If index 0 means don't care (can be used for all if indices).
For port type console the value could be only 0.rw Unsigned32 .1.3.6.1.4.1.89.79.53.1.2 |
rlAAALockedLineServiceTypethe service typerw RlAAAServiceType .1.3.6.1.4.1.89.79.53.1.3 |
rlAAALockedLineStatusThe entry exists only if a line exist.
Setting this field to value usable results in
resetting the password failure counter,
and unlock a locked user.rw Enumeration .1.3.6.1.4.1.89.79.53.1.4 |
rlAAASystemPasswordVerificationAndSettingTableThe table specifies per every system level, old and new passwords.
Serves for verification the old password and setting a new password. SEQUENCE OF RlAAASystemPasswordVerificationAndSettingEntry .1.3.6.1.4.1.89.79.54 |
rlAAASystemPasswordVerificationAndSettingEntryThe row of system password verification and setting table. RlAAASystemPasswordVerificationAndSettingEntry .1.3.6.1.4.1.89.79.54.1 |
rlAAASystemPasswordSettingPrivilegeLevelSystem password Privelege Level to be set. INTEGER .1.3.6.1.4.1.89.79.54.1.1 |
rlAAASystemPasswordVerificationOldPasswordOld system password to be verified.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.54.1.2 |
rlAAASystemPasswordSettingNewPasswordNew system password to be set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.54.1.3 |
rlAAASystemPasswordConfirmNewPasswordNew system password to be confirmed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.54.1.4 |
rlAAAAccountingMngMethodMethod, used for accounting of management sessions,
none denotes Accounting is disabled.rw RlAAAAccountingMethod .1.3.6.1.4.1.89.79.55 |
rlAAAAccountingDot1xMethodMethod, used for accounting of 802.1x sessions,
none denotes Accounting is disabled.rw RlAAAAccountingMethod .1.3.6.1.4.1.89.79.56 |
rlAAAUserInetTableThe table holds all current users that have been authenticated.
it coexist with rlAAAUserTable to support IPv4 and IPv6 SEQUENCE OF RlAAAUserInetEntry .1.3.6.1.4.1.89.79.57 |
rlAAAUserInetEntryThe row definition for this table. RlAAAUserInetEntry .1.3.6.1.4.1.89.79.57.1 |
rlAAAUserInetIndexUser Index Unsigned32 .1.3.6.1.4.1.89.79.57.1.1 |
rlAAAUserInetServiceTypeThe service that the user uses. Service dont care is console
terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.57.1.2 |
rlAAAUserInetRemoteIpAddressTypeUser remote INET address Type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.57.1.3 |
rlAAAUserInetRemoteIpAddressUser remote INET address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.57.1.4 |
rlAAAUserInetNameUser Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.57.1.5 |
rlAAAUserInetLevelUser levelro Unsigned32 .1.3.6.1.4.1.89.79.57.1.6 |
rlAAAUserInetIfIndexUser if index.ro Unsigned32 .1.3.6.1.4.1.89.79.57.1.7 |
rlAAAUserInetLoginDateDate of use creation.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.89.79.57.1.8 |
rlAAAUserInetLoginDurationMSTime in MS since user login.ro Unsigned32 .1.3.6.1.4.1.89.79.57.1.9 |
rlAAALocalLoginHistInetTableThe table holds successful login history
for all users. This table is read-only.
it coexist with rlAAALocalLoginHistTable to support IPv4 and IPv6 SEQUENCE OF RlAAALocalLoginHistInetEntry .1.3.6.1.4.1.89.79.58 |
rlAAALocalLoginHistInetEntryThe row definition for this table. RlAAALocalLoginHistInetEntry .1.3.6.1.4.1.89.79.58.1 |
rlAAALocalLoginHistInetNameUser Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.58.1.1 |
rlAAALocalLoginHistInetIndexIndex in History for specific user.
Lower number means more recent login. Unsigned32 .1.3.6.1.4.1.89.79.58.1.2 |
rlAAALocalLoginHistInetServiceTypeThe service that the user uses.
Service don't care is console terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.58.1.3 |
rlAAALocalLoginHistInetRemoteIpAddressTypeUser remote IP address Type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.58.1.4 |
rlAAALocalLoginHistInetRemoteIpAddressUser remote IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.58.1.5 |
rlAAALocalLoginHistInetLocalIpAddressTypelocal Ip Address Type on login.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.58.1.6 |
rlAAALocalLoginHistInetLocalIpAddresslocal Ip Address on login.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.58.1.7 |
rlAAALocalLoginHistInetDateTimeDate and time in the SysLog Format:
DD-MMM-YYYY HH:MM:SSro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.58.1.8 |
rlAAALocalLoginHistInetMridMrid - indicates to which instance the connection was establishedro Unsigned32 .1.3.6.1.4.1.89.79.58.1.9 |
rlAAALinePassLoginHistInetTableThe table holds successful login history
for Line passwords. This table is read-only.
it coexist with rlAAALinePassLoginHistTable to support IPv4 and IPv6 SEQUENCE OF RlAAALinePassLoginHistInetEntry .1.3.6.1.4.1.89.79.59 |
rlAAALinePassLoginHistInetEntryThe row definition for this table. RlAAALinePassLoginHistInetEntry .1.3.6.1.4.1.89.79.59.1 |
rlAAALinePassLoginHistInetPortTypethe physical port type.rw RlAAALinePortType .1.3.6.1.4.1.89.79.59.1.1 |
rlAAALinePassLoginHistInetIfIndexIdentifies the ifindex for which this entry can be used.
If index 0 means don't care
(can be used for all if indices).
For port type console the value could be only 0.rw Unsigned32 .1.3.6.1.4.1.89.79.59.1.2 |
rlAAALinePassLoginHistInetServiceTypethe service typerw RlAAAServiceType .1.3.6.1.4.1.89.79.59.1.3 |
rlAAALinePassLoginHistInetIndexIndex in HistInetory for specific user.
Lower number means more recent login. Unsigned32 .1.3.6.1.4.1.89.79.59.1.4 |
rlAAALinePassLoginHistInetActServiceTypeThe service that the user uses.
Service don't care is console terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.59.1.5 |
rlAAALinePassLoginHistInetRemoteInetAddressTypeUser remote IP address Type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.59.1.6 |
rlAAALinePassLoginHistInetRemoteInetAddressUser remote IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.59.1.7 |
rlAAALinePassLoginHistInetLocalInetAddressTypelocal Ip Address Type on login.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.59.1.8 |
rlAAALinePassLoginHistInetLocalInetAddresslocal Ip Address on login.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.59.1.9 |
rlAAALinePassLoginHistInetDateTimeDate and time in the SysLog Format:
DD-MMM-YYYY HH:MM:SSro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.59.1.10 |
rlAAALinePassLoginHistInetMridMrid - indicates to which instance the connection was establishedro Unsigned32 .1.3.6.1.4.1.89.79.59.1.11 |
rlAAASystemLoginHistInetTableThe table holds successful login history
for system passwords. This table is read-only.
it coexist with rlAAASystemLoginHistTable to support IPv4 and IPv6 SEQUENCE OF RlAAASystemLoginHistInetEntry .1.3.6.1.4.1.89.79.60 |
rlAAASystemLoginHistInetEntryThe row definition for this table. RlAAASystemLoginHistInetEntry .1.3.6.1.4.1.89.79.60.1 |
rlAAASystemLoginHistInetLevelUser Namero INTEGER .1.3.6.1.4.1.89.79.60.1.1 |
rlAAASystemLoginHistInetIndexIndex in History for specific user.
Lower number means more recent login. Unsigned32 .1.3.6.1.4.1.89.79.60.1.2 |
rlAAASystemLoginHistInetServiceTypeThe service that the user uses.
Service don't care is console terminal.ro RlAAAServiceType .1.3.6.1.4.1.89.79.60.1.3 |
rlAAASystemLoginHistInetRemoteInetAddressTypeUser remote IP address Type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.60.1.4 |
rlAAASystemLoginHistInetRemoteInetAddressUser remote IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.60.1.5 |
rlAAASystemLoginHistInetLocalInetAddressTypelocal Ip Address Type on login.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.60.1.6 |
rlAAASystemLoginHistInetLocalInetAddresslocal Ip Address on login.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.79.60.1.7 |
rlAAASystemLoginHistInetDateTimeDate and time in the SysLog Format:
DD-MMM-YYYY HH:MM:SSro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.60.1.8 |
rlAAASystemLoginHistInetMridMrid - indicates to which instance the connection was establishedro Unsigned32 .1.3.6.1.4.1.89.79.60.1.9 |
rlAAAPasswordComplexityEnabledSpecifies whether password complexity rules
must be applied.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.61 |
rlAAAPasswordComplexityMinCharClassesIndicates minimal number of character classes
from which the password should contain characters
if password complexity enabled.
charater classes are : lower case, upper case,
digits, special characters.rw INTEGER .1.3.6.1.4.1.89.79.62 |
rlAAAPasswordComplexityNotOldPasswordEnabledSpecifies whether new password can be as
same as old password if password complexity enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.63 |
rlAAAPasswordComplexityCharRepeatIndicates that no character in new password can't be
repeated more than 3 times if password complexity enabled.rw INTEGER .1.3.6.1.4.1.89.79.64 |
rlAAAPasswordComplexityNotUserNameEnabledSpecifies whether new password can be as
same as user name if password complexity enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.65 |
rlAAAPasswordComplexityNotManufacturerEnabledSpecifies whether new password can be as
same as manufacturer name if password complexity enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.66 |
rlAAAPasswordGlobalAgingTimeDetermines whether password aging should be applied.
Tic doesn't have to be enabled.
If == 0 then aging is disabled.
Note: Actual aging will not be enabled if system
doesn't have real time clock until, clock is
set either by user or SNTP.rw INTEGER .1.3.6.1.4.1.89.79.67 |
rlAAALocalUserPasswordVerificationAndSettingTableThe table specifies per every local user, old and new passwords.
Serves for verification the old password and setting a new password. SEQUENCE OF RlAAALocalUserPasswordVerificationAndSettingEntry .1.3.6.1.4.1.89.79.68 |
rlAAALocalUserPasswordVerificationAndSettingEntryThe row of local user password verification and setting table. RlAAALocalUserPasswordVerificationAndSettingEntry .1.3.6.1.4.1.89.79.68.1 |
rlAAALocalUserNameStringLocal user name.rw DisplayString .1.3.6.1.4.1.89.79.68.1.1 |
rlAAALocalUserVerificationOldPasswordLocal user old password to be verified.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.68.1.2 |
rlAAALocalUserSettingNewPasswordLocal user new password to be set.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.68.1.3 |
rlAAALocalUserConfirmNewPasswordLocal user new password for confirmation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.68.1.4 |
rlAAACreationDateSystemPasswordLevel15The date on which the system Password for level 15 was created.
Otherwise zero size stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.79.69 |
rlAAAPasswordRecoveryDisableif this MIB is set to TRUE then when user will use 'password Recovery'
to the device , the configuration will automatically be erased.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.79.70 |
rlRadiusMibVersionMIB's version, the current version is 2.
1 - original version.
2 - field rlRadiusServerUsage was added to rlRadiusServerEntryro INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.1 |
rlRadiusGlobalDefaultTimeoutThe maximum time (in seconds) to wait for this RADIUS
server to reply. This MIB is used if the value of the
field rlRadiusServerUseGlobalDefaultTimeout is false.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.2 |
rlRadiusGlobalDefaultRetriesThe number of times to try contacting this RADIUS server. This MIB
is used if the value of the field
rlRadiusServerUseGlobalDefaultRetries is false.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.3 |
rlRadiusGlobalDefaultDeadtimeNumber of minutes that any RADIUS server is ignored after
it has failed. This MIB is used if the value of the field
rlRadiusServerUseGlobalDefaultDeadtime is false.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.4 |
rlRadiusGlobalDefaultKeySecret key to be shared with this RADIUS server. This MIB is
used if the value of the field rlRadiusServerUseGlobalDefaultKey
is false.rw DisplayString .1.3.6.1.4.1.171.10.94.89.89.80.5 |
rlRadiusGlobalDefaultSourceIPv4 address of the interface to use with this server.
A value of 0.0.0.0 for this object disables source
address specification. This MIB is used if the value of the
field rlRadiusServerUseGlobalDefaultSource is false.rw IpAddress .1.3.6.1.4.1.171.10.94.89.89.80.6 |
rlRadiusServerTableThe (conceptual) table listing the RADIUS
servers with which the cliient shares a secret. SEQUENCE OF RlRadiusServerEntry .1.3.6.1.4.1.171.10.94.89.89.80.7 |
rlRadiusServerEntryAn entry (conceptual row) representing a RADIUS
server with which the client shares
a secret. RlRadiusServerEntry .1.3.6.1.4.1.171.10.94.89.89.80.7.1 |
rlRadiusServerAddressThe IP address of the RADIUS server
referred to in this table entry.rw IpAddress .1.3.6.1.4.1.171.10.94.89.89.80.7.1.1 |
rlRadiusServerAuthPortNumberThe UDP port the client is using to send authentication
requests to this server.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.7.1.2 |
rlRadiusServerAcctPortNumberThe UDP port the client is using to send accounting
requests to this server.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.7.1.3 |
rlRadiusServerTimeoutThe maximum time (in seconds) to wait for this RADIUS
server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.7.1.4 |
rlRadiusServerRetriesThe number of times to try contacting this RADIUS server. Value of
0 means that rlRadiusGlobalDefaultRetries.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.7.1.5 |
rlRadiusServerDeadtimeNumber of minutes that any RADIUS server is ignored after
it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime
will be used.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.7.1.6 |
rlRadiusServerUseGlobalDefaultKeyIf this field is set to true the value in field rlRadiusServerKey
is ignored and instead the value in the MIB
rlRadiusGlobalDefaultKey is used. Otherwise the value in
rlRadiusServerKey is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.80.7.1.7 |
rlRadiusServerKeySecret key to be shared with this RADIUS server.rw DisplayString .1.3.6.1.4.1.171.10.94.89.89.80.7.1.8 |
rlRadiusServerSourceIP address of the interface to use with this server.
A value of 0.0.0.0 for this object disables source
address specification. Default value of 255.255.255.255
means that rlRadiusGlobalDefaultSource will be used.rw IpAddress .1.3.6.1.4.1.171.10.94.89.89.80.7.1.9 |
rlRadiusServerPriorityDetermines the order in which the servers will be used, when 0 is
the highest priority. If more than one server share the same
priority - they will be used in lexicgoraphic order
(the order of entries in this table).rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.7.1.10 |
rlRadiusServerStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.80.7.1.11 |
rlRadiusServerUsageDetermines actions for which the radius server will be used.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.80.7.1.12 |
rlRadiusServerInetTableThe (conceptual) table listing the RADIUS
servers with which the cliient shares a secret. SEQUENCE OF RlRadiusServerInetEntry .1.3.6.1.4.1.171.10.94.89.89.80.8 |
rlRadiusServerInetEntryAn entry (conceptual row) representing a RADIUS
server with which the client shares
a secret. RlRadiusServerInetEntry .1.3.6.1.4.1.171.10.94.89.89.80.8.1 |
rlRadiusServerInetAddressTypeThe Inet address type of RADIUS server reffered to
in this table entry .IPv6Z type is not supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.80.8.1.1 |
rlRadiusServerInetAddressThe Inet address of the RADIUS server
referred to in this table entry.Only one instance
of specified address can be added at the same time.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.80.8.1.2 |
rlRadiusServerInetAuthPortNumberThe UDP port the client is using to send authentication
requests to this server.The zero value can be used only
if rlRadiusServerInetAcctPortNumber value is not zero.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.8.1.3 |
rlRadiusServerInetAcctPortNumberThe UDP port the client is using to send accounting
requests to this server.The zero value can be used only
if rlRadiusServerInetAuthPortNumber value is not zero.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.8.1.4 |
rlRadiusServerInetTimeoutThe maximum time (in seconds) to wait for this RADIUS
server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.8.1.5 |
rlRadiusServerInetRetriesThe number of times to try contacting this RADIUS server. Value of
0 means that rlRadiusGlobalDefaultRetries.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.8.1.6 |
rlRadiusServerInetDeadtimeNumber of minutes that any RADIUS server is ignored after
it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime
will be used.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.8.1.7 |
rlRadiusServerInetUseGlobalDefaultKeyIf this field is set to true the value in field rlRadiusServerKey
is ignored and instead the value in the MIB
rlRadiusGlobalDefaultKey is used. Otherwise the value in
rlRadiusServerKey is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.80.8.1.8 |
rlRadiusServerInetKeySecret key to be shared with this RADIUS server.rw DisplayString .1.3.6.1.4.1.171.10.94.89.89.80.8.1.9 |
rlRadiusServerInetSourceTypeThe rlRadiusServerInetSource address type.
IPv6Z type not supportedrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.80.8.1.10 |
rlRadiusServerInetSourceInet address of the interface to use with this server.
To provide backward compatibility the
value of 0.0.0.0 for this object will be used to
disables source address specification.
Default value of 255.255.255.255 means that
rlRadiusGlobalDefaultSource will be used for Ipv4
servers and rlRadiusIPv6GlobalDefaultSource
will be used for Ipv6 servers.IPv6Z type not supported.
Only valid IP address will be used.
Application will set default value.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.80.8.1.11 |
rlRadiusServerInetPriorityDetermines the order in which the servers will be used, when 0 is
the highest priority. If more than one server share the same
priority - they will be used in lexicgoraphic order
(the order of entries in this table).rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.80.8.1.12 |
rlRadiusServerInetStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.80.8.1.13 |
rlRadiusServerInetUsageDetermines actions for which the radius server will be used.
WirelessAuthentication will be used if wireless is supported.rw Enumeration .1.3.6.1.4.1.171.10.94.89.89.80.8.1.14 |
rlRadiusServerInetLastResponseTimeThe value of sysUpTime at the time this server has response.
If there is no request to the server, this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.80.8.1.15 |
rlRadiusGlobalIPv6DefaultSourceIPv6 address of the interface to use with this server.
A NULL value for this object disables source
address specification.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.94.89.89.80.9 |
rlAAAEapMethodListTableThe table specifies all methods list per method name. SEQUENCE OF RlAAAEapMethodListEntry .1.3.6.1.4.1.171.10.94.89.89.97.1 |
rlAAAEapMethodListEntryThe row definition for this table. RlAAAEapMethodListEntry .1.3.6.1.4.1.171.10.94.89.89.97.1.1 |
rlAAAEapMethodListNameLine Method List Namerw DisplayString .1.3.6.1.4.1.171.10.94.89.89.97.1.1.1 |
rlAAAEapMethodType1first method type that will be used in the method
linked list.rw RlAAAEapMethodtype .1.3.6.1.4.1.171.10.94.89.89.97.1.1.2 |
rlAAAEapMethodType2second method type that will be used in the method
linked list.rw RlAAAEapMethodtype .1.3.6.1.4.1.171.10.94.89.89.97.1.1.3 |
rlAAAEapMethodType33th method type that will be used in the method
linked list.rw RlAAAEapMethodtype .1.3.6.1.4.1.171.10.94.89.89.97.1.1.4 |
rlAAAEapMethodType44th method type that will be used in the method
linked list.rw RlAAAEapMethodtype .1.3.6.1.4.1.171.10.94.89.89.97.1.1.5 |
rlAAAEapMethodType55th method type that will be used in the method
linked list.rw RlAAAEapMethodtype .1.3.6.1.4.1.171.10.94.89.89.97.1.1.6 |
rlAAAEapMethodListStatusmethod list status can be destroy or createAndGorw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.97.1.1.7 |
rlAAAEapCurrentMethodListSpecifies the method list that will be used for authentication.rw DisplayString .1.3.6.1.4.1.171.10.94.89.89.97.2 |