Juniper-ACCOUNTING-MIB
AI MIB Summary
The Juniper-ACCOUNTING-MIB monitors network usage statistics and session accounting data for Juniper Networks devices, specifically extending Virtual Router Accounting metrics defined in RLI618 to track traffic volumes, packet counts, and session durations across routing instances.
The accounting MIB for the Juniper Networks enterprise. This MIB augments with the Virtual Router Accounting MIB specified in RLI618.
Main OID:
juniAcctngMIB.1.3.6.1.4.1.4874.2.2.24
133
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
133 total| Object Name |
|---|
juniAcctngMIBThe accounting MIB for the Juniper Networks enterprise. This MIB
augments with the Virtual Router Accounting MIB specified in RLI618. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.24 |
juniAcctngMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1 |
juniAcctngSelectionControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.1 |
juniAcctngSelectionTableA list of accounting information selection entries.
Note that additions, modifications and deletions of entries in this
table can occur at any time, but such changes only take effect on the
next occasion when collection begins into a new interval. Thus, between
modification and the next 'swap', the content of this table does not
reflect the current selection. SEQUENCE OF JuniAcctngSelectionEntry .1.3.6.1.4.1.4874.2.2.24.1.1.1 |
juniAcctngSelectionEntryAn entry used to extend the the selection entry in
acctngSelectionEntry. This conceptual row extension is used for
Juniper accounting extensions for connectionless data collection. JuniAcctngSelectionEntry .1.3.6.1.4.1.4874.2.2.24.1.1.1.1 |
juniAcctngSelectionTypeIndicates the types of connections for which the information selected
by this entry are to be collected. The ietfAccountControl(0) bit
position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType
in the base conceptual row determines the selection type. All other bit
positions for this object over-ride the acctngSelectionType in the base
conceptual row. When the value of this object over-rides the
acctngSelectionType object, the following objects have no meaning:
ACCOUNTING-CONTROL-MIB.acctngFileCollectFailedAttempts
ACCOUNTING-CONTROL-MIB.acctngFileMinAge
because they control or are related to connection oriented accounting.rw Bits .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.1 |
juniAcctngSelectionModeIndicates the data collection mode.rw Enumeration .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.2 |
juniAcctngSelectionSubtreeTypeIndicates the origin of the collection, given the row's subtree. The
architecture implementation for statistics collection imposes that rows
with distinct juniAcctngSelectionSubtreeType may not be collected into
the same accounting file. Conversely, different files (configured from
acctngSelectionFile) entries are necessary in order to collect from
subtrees (configured from acctngSelectionSubtree) that imply into
different subtree types (juniAcctngSelectionSubtreeType).rodeprecated Enumeration .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.3 |
juniAcctngSelectionMaxIfStackLevelsIndicates the maximum number of levels in the ifStack table to be
returned when using the ifStack accounting schema. This object is
ignored if acctngSelectionSubtree is not set to
juniAcctngSelectionSchemaIfStack. When this object is zero, the entire
stack above the starting point(s) given will be returned. When this
object is set to 1, only ifIndexes stacked above the starting point(s)
given will be returned.rw Integer32 .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.4 |
juniAcctngSelectionPolicyNameSpecifies the name of the policy associated with the statistics
collected when using the policy accounting schema. This object is
ignored if acctngSelectionSubtree is not set to
juniAcctngSelectionSchemaPolicy.rw DisplayString .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.5 |
juniAcctngSelectionPolicyTypeSpecifies the attachment point for the policy associated with the
statistics collected when using the policy accounting schema. This
object is ignored if acctngSelectionSubtree is not set to
juniAcctngSelectionSchemaPolicy.rw JuniPolicyAttachmentType (Juniper-POLICY-MIB) .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.6 |
juniAcctngSelectionIfCreateDeleteStatsEnable/disable interfaces create and delete statistics collection.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.7 |
juniAcctngSelectionIfCreateDeleteStatsIfTypesThe interface-types that are used in the configuration of the create/delete
statistics collection. Allowed interface-types are IP, ATM1483, PPP and VLAN.
These interface-types are allowed to configure if the interfaces create/delete stats
feature is enabled i.e juniAcctngSelectionIfCreateDeleteStats == enable.rw Bits .1.3.6.1.4.1.4874.2.2.24.1.1.1.1.8 |
juniAcctngSelectionIfStackStartTableA list of ifIndexes to be used as starting point when using the ifStack
selection schema.
Note that additions, modifications and deletions of entries in this
table can occur at any time, but such changes only take effect on the
next occasion when collection begins into a new interval. Thus, between
modification and the next 'swap', the content of this table does not
reflect the current selection. SEQUENCE OF JuniAcctngSelectionIfStackStartEntry .1.3.6.1.4.1.4874.2.2.24.1.1.3 |
juniAcctngSelectionIfStackStartEntryAn entry used to determine the starting point entry when using the
ifStack schema. JuniAcctngSelectionIfStackStartEntry .1.3.6.1.4.1.4874.2.2.24.1.1.3.1 |
juniAcctngSelectionIfStackIfIndexThe ifIndex to be used as a starting point in the interface stack
configuration. The interfaces to be returned in the ifStack schema will
start from this value, going up. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.24.1.1.3.1.1 |
juniAcctngSelectionIfStackRowStatusControls creation/deletion of entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.24.1.1.3.1.2 |
juniAcctngFileControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.2 |
juniAcctngFileTableA unique value identifying the file transfer behavior and the the file
to where accounting data is to be stored. SEQUENCE OF JuniAcctngFileEntry .1.3.6.1.4.1.4874.2.2.24.1.2.1 |
juniAcctngFileEntryAn entry used to extend the file management of acctngFileEntry. This
conceptual row extension is used for Juniper accounting extensions to
automate the transfer of accounting data to remote hosts. JuniAcctngFileEntry .1.3.6.1.4.1.4874.2.2.24.1.2.1.1 |
juniAcctngFileXferModeIndicates the mode to use for transfering accounting data to remote
client.
juniAcctngManualTransfer - Administrator is responsible for manually
transfering collected accounting data off of the system.
juniAcctngAutomatedTransfer - The agent will automatically transfer the
collected accounting data based at a acctngFileIntervals using an entry
in the juniFileXferTable pointed to by juniAcctngFileXferIndex. If a
manager sets this object to this value, a corresponding row in the
juniFileXferTable must exist, otherwise the set command will fail.
juniActngTransferOnFileFull - The agent will automatically transfer the
collected accounting data when the file reaches the maximum size defined
by acctngFileMaximumSize. If a manager sets this object to this value,
a corresponding row in the juniFileXferTable must exist, otherwise the
set command will fail.
juniAcctngRedundantTransfer - The agent will automatically transfer two
copies of the accounting data based on the acctngFileInterval. One copy
will go to the juniFileXferTable entry identified by
juniAcctngFileXferIndex and one copy will go the the juniFileXferTable
entry identified by juniAcctngFileXferSecondaryIndex.rw Enumeration .1.3.6.1.4.1.4874.2.2.24.1.2.1.1.1 |
juniAcctngFileXferIndexIdentifies an entry in the juniFileXferTable, which defines the file
transfer parameters to use when the agent is configured to automatically
transfer collected accounting data files. A set to this object will
fail if a corresponding entry in the juniFileXferTable does not exist or
it is not set to juniFileXferAcctngStatistics.rw INTEGER .1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2 |
juniAcctngFileXferSecondaryIndexIdentifies a backup or secondary entry in the juniFileXferTable, which
defines the file transfer parameters to use when the agent is configured
to automatically transfer collected accounting data files. A set to
this object will fail if a corresponding entry in the juniFileXferTable
does not exist or it is not set to juniFileXferAcctngStatistics.rw INTEGER .1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3 |
juniAcctngInterfaceControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.3 |
juniAcctngObsInterfaceTableThis table was obsoleted when the indexing changed.obsolete SEQUENCE OF JuniAcctngObsInterfaceEntry .1.3.6.1.4.1.4874.2.2.24.1.3.1 |
juniAcctngObsInterfaceEntryObsolete table entry.obsolete JuniAcctngObsInterfaceEntry .1.3.6.1.4.1.4874.2.2.24.1.3.1.1 |
juniAcctngObsInterfaceAdminStatusObsolete object.rwobsolete JuniAcctngAdminType (Juniper-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.1 |
juniAcctngObsInterfaceOperStatusObsolete object.roobsolete JuniAcctngOperType (Juniper-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.2 |
juniAcctngObsInterfaceRowStatusObsolete object.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.3 |
juniAcctngObsInterfaceAccntgFileIndexObsolete object.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.24.1.3.1.1.4 |
juniAcctngInterfaceTableA table controlling the collection of accounting data on specific
interfaces types. This table provides an efficient mechanism to enable
and/or disable data collection on all interfaces of a specified type.
This table replaces the obsolete version with the same name. SEQUENCE OF JuniAcctngInterfaceEntry .1.3.6.1.4.1.4874.2.2.24.1.3.2 |
juniAcctngInterfaceEntryAn entry which controls whether accounting data is to be collected on
interfaces of a specific type, to a specific accounting file and by the
systems interface location. JuniAcctngInterfaceEntry .1.3.6.1.4.1.4874.2.2.24.1.3.2.1 |
juniAcctngInterfaceFileIndexThis object selects the acctngFileTable entry for the collection
statistics for this interface type. The value of this object is the
same as the acctngFileIndex and is used to cross reference accounting
data files in the AcctngFileTable.
If the value of this object is zero (special value), then the combined
interface type/location defined by this entry is collected into all
entries in the acctngFileTable, i.e., all accounting files. Integer32 .1.3.6.1.4.1.4874.2.2.24.1.3.2.1.1 |
juniAcctngInterfaceLocationThe interface location specification for this entry. If the value of
this entry is a zero length string, then all system locations are
included for the interface type defined by juniIfType. JuniInterfaceLocation (Juniper-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.2.1.2 |
juniAcctngInterfaceAdminStatusThe desired administrative state for accounting data collection for
interfaces defined by the type of this entry. The administrative scope
is for all interfaces of the type defined by the corresponding
juniIfType for this entry.rw JuniAcctngAdminType (Juniper-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.2.1.3 |
juniAcctngInterfaceOperStatusThe operational state for accounting data collection on for all
interfaces corresponding to this entries type.ro JuniAcctngOperType (Juniper-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.2.1.4 |
juniAcctngInterfaceRowStatusControls creation/deletion of entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.24.1.3.2.1.5 |
juniAcctngIfFinalStatsXferStatsTableA table to display line cards interfaces final statistics transfer
statistics. SEQUENCE OF JuniAcctngIfFinalStatsXferStatsEntry .1.3.6.1.4.1.4874.2.2.24.1.3.3 |
juniAcctngIfFinalStatsXferStatsEntryAn entry is a display of one line card's interfaces final statistics
transfer statistics. JuniAcctngIfFinalStatsXferStatsEntry .1.3.6.1.4.1.4874.2.2.24.1.3.3.1 |
juniAcctngIfFinalStatsXferStatsSlotNumberThis object selects the slot number to display interfaces final statistics
transfer statistics for the line module on that slot. Integer32 .1.3.6.1.4.1.4874.2.2.24.1.3.3.1.1 |
juniAcctngIfFinalStatsXferStatsReceivedCount of the total received interfaces final statistics records for the line module.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.24.1.3.3.1.2 |
juniAcctngIfFinalStatsXferStatsTransferredCount of the total transferred interfaces final statistics records for the line module.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.24.1.3.3.1.3 |
juniAcctngIfFinalStatsXferStatsDroppedCount of the total dropped interfaces final statistics records for the line module.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.24.1.3.3.1.4 |
juniAcctngScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.4 |
juniAcctngInterfaceDescrFormatThe format of the interface descriptions reported by the accounting
application.rw JuniInterfaceDescrFormat (Juniper-TC) .1.3.6.1.4.1.4874.2.2.24.1.4.1 |
juniAcctngInterfaceNumberingModeThe format of the interface descriptions reported by the accounting
application.rw Enumeration .1.3.6.1.4.1.4874.2.2.24.1.4.2 |
juniAcctngFileFormatThe file format of the accounting file.rw Enumeration .1.3.6.1.4.1.4874.2.2.24.1.4.3 |
juniAcctngVirtualRouterControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.1.5 |
juniAcctngVirtualRouterTableThis Table stores the configuration of Virtual Routers per collector (File Index) basis. Multiple Virtual Routers can be
configured per collector (file index) SEQUENCE OF JuniAcctngVirtualRouterTableEntry .1.3.6.1.4.1.4874.2.2.24.1.5.1 |
juniAcctngVirtualRouterTableEntryAn entry used to determine the starting point entry when using the
ifStack schema. JuniAcctngVirtualRouterTableEntry .1.3.6.1.4.1.4874.2.2.24.1.5.1.1 |
juniAcctngVirtualRouterTableIndexThis Index to be used as a starting point in the Virtual Router Table
configuration. The index to be returned in the Virtual Router Table will
start from this value, going up.ro Integer32 .1.3.6.1.4.1.4874.2.2.24.1.5.1.1.1 |
juniAcctngVirtualRouterTableVRNameVirtual Router name(s) space separated.rw DisplayString .1.3.6.1.4.1.4874.2.2.24.1.5.1.1.2 |
juniAcctngVirtualRouterTableRowStatusControls creation/deletion of entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.24.1.5.1.1.3 |
juniAcctngSelectionSchemaThe root OBJECT IDENTIFIER under which accounting selection tree
objects are assigned. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2 |
juniAcctngSelectionSchemaIf OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1 |
juniAcctngIfInOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.1 |
juniAcctngIfInUcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.2 |
juniAcctngIfInDiscards OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.3 |
juniAcctngIfInErrors OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.4 |
juniAcctngIfInUnknownProtos OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.5 |
juniAcctngIfOutOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.6 |
juniAcctngIfOutUcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.7 |
juniAcctngIfOutDiscards OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.8 |
juniAcctngIfOutErrors OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.9 |
juniAcctngIfCorrelator OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.10 |
juniAcctngIfInPolicedOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.11 |
juniAcctngIfInPolicedPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.12 |
juniAcctngIfInSpoofedPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.13 |
juniAcctngIfOutPolicedOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.14 |
juniAcctngIfOutPolicedPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.15 |
juniAcctngIfOutSchedulerDropOctets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.16 |
juniAcctngIfOutSchedulerDropPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.17 |
juniAcctngIfLowerInterface OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.18 |
juniAcctngIfTimeOffset OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.19 |
juniAcctngifInMulticastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.20 |
juniAcctngifInBroadcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.21 |
juniAcctngifOutMulticastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.22 |
juniAcctngifOutBroadcastPkts OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.1.23 |
juniAcctngSelectionSchemaIfStack OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.3 |
juniAcctngSelectionSchemaSystem OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.4 |
juniAcctngSelectionSchemaPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5 |
juniAcctngGreenPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.1 |
juniAcctngUpperGreenPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.2 |
juniAcctngYellowPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.3 |
juniAcctngUpperYellowPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.4 |
juniAcctngRedPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.5 |
juniAcctngUpperRedPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.6 |
juniAcctngGreenBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.7 |
juniAcctngUpperGreenBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.8 |
juniAcctngYellowBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.9 |
juniAcctngUpperYellowBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.10 |
juniAcctngRedBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.11 |
juniAcctngUpperRedBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.5.12 |
juniAcctngSelectionSchemaIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6 |
juniAcctngIgmpLowerIndex OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6.1 |
juniAcctngIgmpRouterIndex OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6.2 |
juniAcctngIgmpDestAddr OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6.3 |
juniAcctngIgmpSourceIndex OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6.4 |
juniAcctngIgmpMulticastGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6.5 |
juniAcctngIgmpLowerIgmpCommand OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6.6 |
juniAcctngIgmpLowerTimeStamp OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.6.7 |
juniAcctngSelectionSchemaQos OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7 |
juniAcctngParentShapingRate OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.1 |
juniAcctngParentSharedShapRate OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.2 |
juniAcctngParentChildWeight OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.3 |
juniAcctngQueueLength OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.4 |
juniAcctngForwardedRate OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.5 |
juniAcctngAggDropRate OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.6 |
juniAcctngForwardedPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.7 |
juniAcctngForwardedBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.8 |
juniAcctngGreenDropPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.9 |
juniAcctngGreenDropBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.10 |
juniAcctngYellowDropPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.11 |
juniAcctngYellowDropBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.12 |
juniAcctngRedDropPackets OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.13 |
juniAcctngRedDropBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.14 |
juniAcctngDropProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.15 |
juniAcctngQueueProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.16 |
juniAcctngSchedulerProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.17 |
juniAcctngStatisticsProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.18 |
juniAcctngShapingMode OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.19 |
juniAcctngShapingRate OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.20 |
juniAcctngBurst OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.21 |
juniAcctngAssuredRate OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.22 |
juniAcctngWeight OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.23 |
juniAcctngRedEnabled OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.24 |
juniAcctngSharedShapingMode OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.25 |
juniAcctngSharedShapingRate OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.26 |
juniAcctngByteAdjType OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.27 |
juniAcctngByteAdjBytes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.2.7.28 |
juniAcctngConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.3 |
juniAcctngGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.3.1 |
juniAcctngCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.24.3.2 |