JUNIPER-MIMSTP-MIB
Updated May 31, 2016This mib module is for Juniper Networks Proprietory Multiple Instance MSTP mib
Main OID:
jnxMIMstMIB.1.3.6.1.4.1.2636.3.46.1
174
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
174 total| Object Name |
|---|
jnxMIMstMIBThis mib module is for Juniper Networks Proprietory
Multiple Instance MSTP mib MODULE-IDENTITY .1.3.6.1.4.1.2636.3.46.1 |
IMPORTSThis mib module is for Juniper Networks Proprietory
Multiple Instance MSTP mib Unknown .1.3.6.1.4.1.2636.3.46.1 |
jnxMIDot1sJuniperMst OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.46.1.1 |
jnxMIMstGlobalTraceThis object is used to enable Global Trace
Statements in the MSTP Module.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.1 |
jnxMIMstGlobalDebugThis object is used to enable Global Debug
Statements in the MSTP Module.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.2 |
jnxMIDot1sJuniperMstTableList of per Virtual Context Mst Module Parameters. SEQUENCE OF JnxMIDot1sJuniperMstEntry .1.3.6.1.4.1.2636.3.46.1.1.3 |
jnxMIDot1sJuniperMstEntryVirtual Context Mst Module Parameters. JnxMIDot1sJuniperMstEntry .1.3.6.1.4.1.2636.3.46.1.1.3.1 |
jnxMIDot1sJuniperMstContextIdIdentifies the Virtual Context. Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.1 |
jnxMIMstSystemControlThe administrative shutdown status requested by management for the MST
feature. The value start (1) indicates that MST should be active in
the device on all ports. The value shutdown (2) indicates that MST
should be shutdown in the device on all ports. All memory should
be released on all ports.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.3.1.2 |
jnxMIMstModuleStatusThe administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, jnxMIMstSystemControl set to start.ro EnabledStatus .1.3.6.1.4.1.2636.3.46.1.1.3.1.3 |
jnxMIMstMaxMstInstanceNumberThe Maximun number of spanning trees to be allowed.
A User may limit the Number of Spanning Tree instance
to be allowed in the Bridge.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.4 |
jnxMIMstNoOfMstiSupportedIndicates Maximum number of spanning tree Instances supported.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.5 |
jnxMIMstMaxHopCountIndicates the Maximum Hop Count value.
The granularity of this timer is specified
to be 1 second. An agent may return a badValue
error if a set is attempted to a value which is
not a whole number of seconds.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.6 |
jnxMIMstBrgAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with jnxMIMstCistBridgePriority or
jnxMIMstMstiBridgePriority a unique BridgeIdentifier
is formed which is used in the Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.3.1.7 |
jnxMIMstCistRootThe bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.3.1.8 |
jnxMIMstCistRegionalRootThe bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.3.1.9 |
jnxMIMstCistRootCostThe Cost of the path to the CIST Root as seen
from this bridge.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.10 |
jnxMIMstCistRegionalRootCostThe Cost of the path to the CIST Regional Root
as seen from this bridge.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.11 |
jnxMIMstCistRootPortThe Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.12 |
jnxMIMstCistBridgePriorityThe Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.13 |
jnxMIMstCistBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.ro Timeout .1.3.6.1.4.1.2636.3.46.1.1.3.1.14 |
jnxMIMstCistBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.ro Timeout .1.3.6.1.4.1.2636.3.46.1.1.3.1.15 |
jnxMIMstCistHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.16 |
jnxMIMstCistMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.3.1.17 |
jnxMIMstCistForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.3.1.18 |
jnxMIMstMstpUpCountThe number of times MSTP Module has been enabled.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.19 |
jnxMIMstMstpDownCountThe number of times MSTP Module has been disabled.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.20 |
jnxMIMstPathCostDefaultTypeThe version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A value of stp8021t2001(2) uses the 32-bit default Path
Costs from IEEE Std. 802.1t.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.3.1.21 |
jnxMIMstTraceThis object is used to enable Trace Statements in the MSTP
Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources except Buffers
6 - All Failure Traces
7 - Buffer Traces
The remaining bits are unused. Combination of trace levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Trace Option to any value will cause the Debug Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.22 |
jnxMIMstDebugThis object is used to enable Debug Statements in the MSTP
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integer, represents a particular
level of Debug.
The mapping between the bit positions & the level of debug is
as follows:
0 - Init and Shutdown Debug statements
1 - Management Debug statements
2 - Memory related Debug statements
3 - BPDU related Debug statements
4 - Event Handling Debug statements
5 - Timer Module Debug statements
6 - Port Information SEM Debug statements
7 - Port Receive SEM Debug statements (valid in the case of MSTP alone)
8 - Role Selection SEM Debug statements
9 - Role Transition SEM Debug statements
10 - State Transition SEM Debug statements
11 - Protocol Migration SEM Debug statements
12 - Topology Change SEM Debug statements
13 - Port Transmit SEM Debug statements
14 - Bridge Detection SEM Debug statements
15 - All Failure Debug statements
16 - Redundancy code flow Debug statements
The remaining bits are unused. Combination of debug levels are
also allowed.
For example if the bits 0 and 1 are set, then the Debug
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Debug Option to any value will cause the Trace Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.23 |
jnxMIMstForceProtocolVersionThe version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.3.1.24 |
jnxMIMstTxHoldCountThe value used by the Port Transmit state machine to limit
the maximum transmission rate.ro INTEGER .1.3.6.1.4.1.2636.3.46.1.1.3.1.25 |
jnxMIMstMstiConfigIdSelThe Configuration Identifier Format Selector used
by the Bridge. This has a fixed value of 0 to indicate
RegionName, RegionVersion are specified as in Standard.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.26 |
jnxMIMstMstiRegionNameThe Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.3.1.27 |
jnxMIMstMstiRegionVersionVersion of the MST Region.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.28 |
jnxMIMstMstiConfigDigestThe Configuration Digest value for this Region.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.3.1.29 |
jnxMIMstBufferOverFlowCountThe number of times Buffer overflows/failures have occured.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.30 |
jnxMIMstMemAllocFailureCountThe number of times memory allocation failures have occured.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.31 |
jnxMIMstRegionConfigChangeCountThe number of times a Region Configuration Identifier Change
was detected.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.32 |
jnxMIMstCistBridgeRoleSelectionSemStateCurrent state of the Port Role Selection State Machine
of this bridge in Common Spanning Tree contextro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.3.1.33 |
jnxMIMstCistTimeSinceTopologyChangeThe time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for Common Spanning Tree context.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.46.1.1.3.1.34 |
jnxMIMstCistTopChangesThe number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for Common
Spanning Tree context.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.35 |
jnxMIMstCistNewRootBridgeCountThe number of times this Bridge has detected a Root
Bridge change for Common Spanning Tree context.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.3.1.36 |
jnxMIMstCistHelloTimeThis time value, measured in units of hundredths
of a second, specifies the amount of time between
the transmission of configuration BPDUs by this node
on any port when it is the root of the spanning tree
or trying to become so.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.3.1.37 |
jnxMIMstCistBridgeHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second.ro Timeout .1.3.6.1.4.1.2636.3.46.1.1.3.1.38 |
jnxMIMstCistDynamicPathcostCalculationThis object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed, otherwise the link speed at the time of port
creation is used for calculating the path cost. In both cases
if the user has configured a pathcost for the port that will be
used. By default dynamic pathcost calculation is set to false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.3.1.39 |
jnxMIMstMstiBridgeTableTable containing Bridge Information specific to Spanning
Tree Instance. This table maintains context ID as one
more index to support Multiple Instances. SEQUENCE OF JnxMIMstMstiBridgeEntry .1.3.6.1.4.1.2636.3.46.1.1.4 |
jnxMIMstMstiBridgeEntryEntry indicating the Bridge Information. JnxMIMstMstiBridgeEntry .1.3.6.1.4.1.2636.3.46.1.1.4.1 |
jnxMIMstMstiInstanceIndexSpanning Tree Instance to which the information belongs.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.1 |
jnxMIMstMstiBridgeRegionalRootMSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this nodero BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.4.1.2 |
jnxMIMstMstiBridgePriorityThe writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.3 |
jnxMIMstMstiRootCostThe Cost of the path to the MSTI Regional Root as seen
by this bridge.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.4 |
jnxMIMstMstiRootPortThe Port Number of the Port which offers the lowest
path cost from this bridge to the MSTI Region Root Bridge.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.5 |
jnxMIMstMstiTimeSinceTopologyChangeThe time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for this spanning tree instance.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.3.46.1.1.4.1.6 |
jnxMIMstMstiTopChangesThe number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.7 |
jnxMIMstMstiNewRootBridgeCountThe number of times this Bridge has detected a Root
Bridge change for this spanning tree instance.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.8 |
jnxMIMstMstiBridgeRoleSelectionSemStateCurrent state of the Port Role Selection State Machine
for this spanning tree instance for this bridge.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.4.1.9 |
jnxMIMstInstanceUpCountThe number of times a new spanning tree instance has
been created. This counter is incremented whenever a new
spanning tree instance is created and also whenever a
vlan is mapped to the instance.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.10 |
jnxMIMstInstanceDownCountThe number of times a spanning tree instance has
been deleted. This counter is incremented whenever a
spanning tree instance is deleted and also whenever a
vlan is unmapped from the instance.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.4.1.11 |
jnxMIMstOldDesignatedRootThe bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.4.1.12 |
jnxMIMstVlanInstanceMappingTableThis table contains one entry for each instance of MSTP.
This table maintains context ID as one more index to
support Multiple Instances. SEQUENCE OF JnxMIMstVlanInstanceMappingEntry .1.3.6.1.4.1.2636.3.46.1.1.5 |
jnxMIMstVlanInstanceMappingEntryA conceptual row containing the status of the MSTP instance. JnxMIMstVlanInstanceMappingEntry .1.3.6.1.4.1.2636.3.46.1.1.5.1 |
jnxMIMstInstanceIndexAn arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance. Integer32 .1.3.6.1.4.1.2636.3.46.1.1.5.1.1 |
jnxMIMstMapVlanIndexThe VlanId will get mapped to the spanning tree instance
specified. All the Instance Specific information for the
Member ports of the Vlan will be created.This object is
used only for SET operation.GET Operation returns null values.
If the VlanId to Instance Mapping has to be known then any
one of the VlanMapped object should be used.ro VlanId .1.3.6.1.4.1.2636.3.46.1.1.5.1.2 |
jnxMIMstUnMapVlanIndexThe VlanId will get unmapped from spanning tree instance
to which it it mapped. All the Instance Specific information
for the Member ports of the Vlan will get released.This object
is used only for SET operation.GET Operation returns null values.ro VlanId .1.3.6.1.4.1.2636.3.46.1.1.5.1.3 |
jnxMIMstSetVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.5.1.4 |
jnxMIMstResetVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.5.1.5 |
jnxMIMstInstanceVlanMappedA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.5.1.6 |
jnxMIMstInstanceVlanMapped2kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.5.1.7 |
jnxMIMstInstanceVlanMapped3kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.5.1.8 |
jnxMIMstInstanceVlanMapped4kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.5.1.9 |
jnxMIMstCistPortTableThis table contains Common Spanning Tree Port
Information. SEQUENCE OF JnxMIMstCistPortEntry .1.3.6.1.4.1.2636.3.46.1.1.6 |
jnxMIMstCistPortEntryA list of information maintained by every port for
Common Spanning tree. JnxMIMstCistPortEntry .1.3.6.1.4.1.2636.3.46.1.1.6.1 |
jnxMIMstCistPortThe Port number of the port for which this entry contains
spanning tree information. Integer32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.1 |
jnxMIMstCistPortPathCostThe contribution of this port to the path cost of
paths towards the CIST Root which include this port.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.2 |
jnxMIMstCistPortPriorityThe four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.3 |
jnxMIMstCistPortDesignatedRootThe unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.6.1.4 |
jnxMIMstCistPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.6.1.5 |
jnxMIMstCistPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.6.1.6 |
jnxMIMstCistPortAdminP2PThe administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.7 |
jnxMIMstCistPortOperP2PThe operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the jnxMIMstCistPortAdminP2P object.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.6.1.8 |
jnxMIMstCistPortAdminEdgeStatusThe administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.6.1.9 |
jnxMIMstCistPortOperEdgeStatusThe operational value of the Edge Port parameter. The
object is initialized to the value of
jnxMIMstCistPortAdminEdgeStatus and is set FALSE on reception
of a BPDU.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.6.1.10 |
jnxMIMstCistPortProtocolMigrationIndicates the Protocol migration state of this Port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs without instance information.
Any other operation on this object has no effect and
it always returns FALSE(2) when read.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.6.1.11 |
jnxMIMstCistPortStateCurrent state of the Port as defined by the Common
spanning tree protocol.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.12 |
jnxMIMstCistForcePortStateCurrent state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contextsro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.13 |
jnxMIMstCistPortForwardTransitionsNumber of times this port has transitioned to the
Forwarding State.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.14 |
jnxMIMstCistPortRxMstBpduCountNumber of MST BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.15 |
jnxMIMstCistPortRxRstBpduCountNumber of RST BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.16 |
jnxMIMstCistPortRxConfigBpduCountNumber of Configuration BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.17 |
jnxMIMstCistPortRxTcnBpduCountNumber of TCN BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.18 |
jnxMIMstCistPortTxMstBpduCountNumber of MST BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.19 |
jnxMIMstCistPortTxRstBpduCountNumber of RST BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.20 |
jnxMIMstCistPortTxConfigBpduCountNumber of Configuration BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.21 |
jnxMIMstCistPortTxTcnBpduCountNumber of TCN BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.22 |
jnxMIMstCistPortInvalidMstBpduRxCountNumber of Invalid MST BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.23 |
jnxMIMstCistPortInvalidRstBpduRxCountNumber of Invalid RST BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.24 |
jnxMIMstCistPortInvalidConfigBpduRxCountNumber of Invalid Configuration BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.25 |
jnxMIMstCistPortInvalidTcnBpduRxCountNumber of Invalid TCN BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.26 |
jnxMIMstCistPortTransmitSemStateIndicates current State of the Port Transmit state machine.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.27 |
jnxMIMstCistPortReceiveSemStateIndicates current State of the Port Receive state machine.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.28 |
jnxMIMstCistPortProtMigrationSemStateIndicates current State of the Port Protocol Migration
State machine.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.29 |
jnxMIMstCistProtocolMigrationCountThe number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and
RSTP/MSTP.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.30 |
jnxMIMstCistPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.31 |
jnxMIMstCistPortRegionalRootThe unique Bridge Identifier of the bridge recorded as the
CIST Regional Root Identifier in the configuration BPDUs
transmitted.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.6.1.32 |
jnxMIMstCistPortRegionalPathCostThe contribution of this port to the path cost of paths
towards the CIST Regional Root which include this port.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.6.1.33 |
jnxMIMstCistSelectedPortRoleSelected Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.34 |
jnxMIMstCistCurrentPortRoleCurrent Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.35 |
jnxMIMstCistPortInfoSemStateCurrent state of the Port Information State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.36 |
jnxMIMstCistPortRoleTransitionSemStateCurrent state of the Port Role Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.37 |
jnxMIMstCistPortStateTransitionSemStateCurrent state of the Port State Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.38 |
jnxMIMstCistPortTopologyChangeSemStateCurrent state of the Topology Change State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.39 |
jnxMIMstCistPortHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on this port
in units of hundredths of a second.ro Timeout .1.3.6.1.4.1.2636.3.46.1.1.6.1.40 |
jnxMIMstCistPortOperVersionThis indicates whether the Port is operationally in the Mstp
mode, Rstp mode or the Stp-compatible mode i.e., whether the
Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.6.1.41 |
jnxMIMstCistPortEffectivePortStateThe effective operational state of the port for CIST. This will
TRUE only when the port is operationally up in the Interface level
and Protocol level for CIST. This is will be set to False for all
other times.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.6.1.42 |
jnxMIMstCistPortAutoEdgeStatusThis parameter when TRUE(1) indicates that detection
of a port as Edge Port happens automatically
and FALSE(2) indicates that this feature is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.6.1.43 |
jnxMIMstMstiPortTableThis table contains Spanning Tree Instance Specific Port
Information. SEQUENCE OF JnxMIMstMstiPortEntry .1.3.6.1.4.1.2636.3.46.1.1.7 |
jnxMIMstMstiPortEntryA list of information maintained by every port for each
and every spanning tree instance. JnxMIMstMstiPortEntry .1.3.6.1.4.1.2636.3.46.1.1.7.1 |
jnxMIMstMstiPortThe Port number of the port for which this entry contains
spanning tree information. Integer32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.1 |
jnxMIMstMstiPortPathCostThe contribution of this port to the path cost of
paths towards the MSTI Root which include this port.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.2 |
jnxMIMstMstiPortPriorityThe four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.3 |
jnxMIMstMstiPortDesignatedRootThe unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.7.1.4 |
jnxMIMstMstiPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2636.3.46.1.1.7.1.5 |
jnxMIMstMstiPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.2636.3.46.1.1.7.1.6 |
jnxMIMstMstiPortStateCurrent state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.7 |
jnxMIMstMstiForcePortStateCurrent state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'jnxMIMstCistForcePortState' is set to 'enabled' for this portro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.8 |
jnxMIMstMstiPortForwardTransitionsNumber of times this port has transitioned to the
Forwarding State for specific instance.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.9 |
jnxMIMstMstiPortReceivedBPDUsNumber of BPDUs received by this port for this
spanning tree instance.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.10 |
jnxMIMstMstiPortTransmittedBPDUsNumber of BPDUs transmitted on this port for
this spanning tree instance.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.11 |
jnxMIMstMstiPortInvalidBPDUsRcvdNumber of Invalid BPDUs received on this Port
for this spanning tree instance.ro Counter32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.12 |
jnxMIMstMstiPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.1.7.1.13 |
jnxMIMstMstiSelectedPortRoleSelected Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.14 |
jnxMIMstMstiCurrentPortRoleCurrent Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.15 |
jnxMIMstMstiPortInfoSemStateCurrent state of the Port Information State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.16 |
jnxMIMstMstiPortRoleTransitionSemStateCurrent state of the Port Role Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.17 |
jnxMIMstMstiPortStateTransitionSemStateCurrent state of the Port State Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.18 |
jnxMIMstMstiPortTopologyChangeSemStateCurrent state of the Topology Change State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.7.1.19 |
jnxMIMstMstiPortEffectivePortStateThe effective operational stae of the port for specific instance.
This is will be TRUE only when the port is operationally up in the
interface level and Protocol level for the specific instance.
This is will be set to false at all other times.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.7.1.20 |
jnxMIMstCistPortProtectTableDefines the jnxMIMstCist Port Table for providing extensions
for Root Protect and Loop Protect to the corresponding
jnxMIMstCistPortTable entry. SEQUENCE OF JnxMIMstCistPortProtectEntry .1.3.6.1.4.1.2636.3.46.1.1.8 |
jnxMIMstCistPortProtectEntryDefines an entry in the jnxMIMstCistPortProtectTable. This essentially
augments the jnxMIMstCistPortEntry with additional objects. JnxMIMstCistPortProtectEntry .1.3.6.1.4.1.2636.3.46.1.1.8.1 |
jnxMIMstCistPortRootProtectEnabledA Boolean value set by management indicating whether Root protect
functionality is enabled on the port. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. This parameter should be
FALSE by default.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.8.1.1 |
jnxMIMstCistPortRootProtectStateIndicates whether the port was prevented from being a root port
for CIST. This parameter will always return 'no-error (0)' if
jnxMIMstCistPortRootProtectEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.8.1.2 |
jnxMIMstCistPortLoopProtectEnabledA Boolean value set by management indicating whether Loop protect
functionality is enabled on the port. If TRUE causes the Port not
to be selected as Designated Port for the CIST or any MSTI, when
the received superior BPDU is aged out. This parameter should be
FALSE by default.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.46.1.1.8.1.3 |
jnxMIMstCistPortLoopProtectStateIndicates whether a potential Loop was prevented on the port for CIST.
This parameter will always return 'no-error (0)' if
jnxMIMstCistPortLoopProtectEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.8.1.4 |
jnxMIMstMstiPortProtectTableDefines the jnxMIMstMsti Port Table for providing extensions
for Root Protect and Loop Protect to the corresponding
jnxMIMstMstiPortTable entry. SEQUENCE OF JnxMIMstMstiPortProtectEntry .1.3.6.1.4.1.2636.3.46.1.1.9 |
jnxMIMstMstiPortProtectEntryDefines an entry in the jnxMIMstMstiPortProtectTable. This essentially
augments the jnxMIMstMstiPortEntry with additional objects. JnxMIMstMstiPortProtectEntry .1.3.6.1.4.1.2636.3.46.1.1.9.1 |
jnxMIMstMstiPortRootProtectStateIndicates whether the port was prevented from being a root port
for CIST. This parameter will always return 'no-error (0)' if
jnxMIMstCistPortRootProtectEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.9.1.1 |
jnxMIMstMstiPortLoopProtectStateIndicates whether a potential Loop was prevented on the port for CIST.
This parameter will always return 'no-error (0)' if
jnxMIMstCistPortLoopProtectEnabled is FALSE.ro Enumeration .1.3.6.1.4.1.2636.3.46.1.1.9.1.2 |
jnxMIDot1sJnxMstTrapsControl OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.46.1.2 |
jnxMIDot1sJnxMstSetGlobalTrapOptionThis object is used to enable and disable MSTP traps for memory
failure or buffer failure irrespective of the context in which
the failure occurs.
0 - Traps are not enabled.
1 - Memory and buffer failure traps enabledro Integer32 .1.3.6.1.4.1.2636.3.46.1.2.1 |
jnxMIMstGlobalErrTrapTypeUsed within the Trap Notification PDU.
It denotes general events like
none - none of the below values
memfail - memory allocation failure
bufffail - buffer allocation failurero Enumeration .1.3.6.1.4.1.2636.3.46.1.2.2 |
jnxMIDot1sJnxMstTrapsControlTableList of per virtual bridge Trap Control Info. SEQUENCE OF JnxMIDot1sJnxMstTrapsControlEntry .1.3.6.1.4.1.2636.3.46.1.2.3 |
jnxMIDot1sJnxMstTrapsControlEntryVirtual bridge TrapsControl information. JnxMIDot1sJnxMstTrapsControlEntry .1.3.6.1.4.1.2636.3.46.1.2.3.1 |
jnxMIMstSetTrapsThis object is used to enable and disable context-specific
MSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - General Traps like protocol up or down
2 - Exception Traps like port protocol migration or
invalid packet rcvd in port
3 - All the above Trapsro Integer32 .1.3.6.1.4.1.2636.3.46.1.2.3.1.1 |
jnxMIMstGenTrapTypeUsed within the Trap Notification PDU.
It denotes general events like
none - none of the below values
up - protocol UP,
down - protocol DOWNro Enumeration .1.3.6.1.4.1.2636.3.46.1.2.3.1.2 |
jnxMIMstPortTrapNotificationTableThis table is used to store the notification information
occured in each of the port for protocol migration and
invalid packet received. This table is maintained per virtual
context in the system. SEQUENCE OF JnxMIMstPortTrapNotificationEntry .1.3.6.1.4.1.2636.3.46.1.2.4 |
jnxMIMstPortTrapNotificationEntryThis entry is used to store the notification information JnxMIMstPortTrapNotificationEntry .1.3.6.1.4.1.2636.3.46.1.2.4.1 |
jnxMIMstPortTrapIndexA unique value, greater than zero, indicating the Port number.ro Integer32 .1.3.6.1.4.1.2636.3.46.1.2.4.1.1 |
jnxMIMstPortMigrationTypePort Protocol migration type occured in the portro Enumeration .1.3.6.1.4.1.2636.3.46.1.2.4.1.2 |
jnxMIMstPktErrTypeType of invalid packet received in each of the portro Enumeration .1.3.6.1.4.1.2636.3.46.1.2.4.1.3 |
jnxMIMstPktErrValPacket error value corresponding to the above typero INTEGER .1.3.6.1.4.1.2636.3.46.1.2.4.1.4 |
jnxMIDot1sJuniperMstTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.46.1.3 |
jnxMIMstTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.46.1.3.0 |
jnxMIMstGenTrapGenerated when any of the general events like protocol up or
protocol down occurs NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.1 |
jnxMIMstErrTrapGenerated when any of the error events like memory failure or buffer failure
or protocol migration or new root or topology change occurs NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.2 |
jnxMIMstNewRootTrapGenerated whenever a new root bridge is selected in the topology.
The jnxMIMstNewRootTrap indicates that the sending agent has become
the new root of the Spanning Tree; the trap is sent by a bridge soon
after its election as the new root NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.3 |
jnxMIMstTopologyChgTrapGenerated when topology change is detected NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.4 |
jnxMIMstProtocolMigrationTrapGenerated when port protocol migration happens in the port NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.5 |
jnxMIMstInvalidBpduRxdTrapGenerated when the invalid packet is received for
bpdu/stp/rstp/maximum age/forward delay/hello time NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.6 |
jnxMIMstRegionConfigChangeTrapGenerated when the MST region's configuration
identifier changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.7 |
jnxMIMstCistPortRootProtectStateChangeTrapGenerated when the ports Root-protect state (no-error or root-prevented)
for CIST changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.8 |
jnxMIMstMstiPortRootProtectStateChangeTrapGenerated when the ports Root-protect state (no-error or root-prevented)
an MSTI changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.9 |
jnxMIMstCistPortLoopProtectStateChangeTrapGenerated when the ports Loop-protect state (no-error or loop-prevented)
for CIST changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.10 |
jnxMIMstMstiPortLoopProtectStateChangeTrapGenerated when the ports Loop-protect state (no-error or loop-prevented)
an MSTI changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.46.1.3.0.11 |