ITF-MIB-EXT
AI MIB Summary
Standard SNMP MIB module defining data structures for ITF-MIB-EXT.
100
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
100 total| Object Name |
|---|
asamItfMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6 |
IMPORTS Unknown .1.3.6.1.4.1.637.61.1.6 |
asamPhyItfOperStatusThe bitmap for the operational status of the physical interfaces.
MAX_PIF: the maximum number of interface per board
SLOTS: the number of slots in the system
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Up = 1, Down = 0
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: This object is not supported.roobsolete OCTET STRING .1.3.6.1.4.1.637.61.1.6.1 |
asamPhyItfBitmapThe bitmap for the physical interfaces.
MAX_PIF: the maximum number of interface per board
SLOTS: the number of slots in the system
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Present = 1, Not present = 0
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: This object is not supported.roobsolete OCTET STRING .1.3.6.1.4.1.637.61.1.6.2 |
asamPhyItfChangeOccurredTrapEnableBoolean indicating wether the changeOccurredTrap should be sent
or not. The trap will not be sent if the linkUpDownTrap was already
sent (regardless of the value asamChangeOccurredTrapEnable).
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: This object is not supported.rwobsolete Enumeration .1.3.6.1.4.1.637.61.1.6.3 |
asamPhyItfNumberChangeOccurredThis is a counter indicating the number of state changes of the
physical line.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: 0
UNITS: NA SPARSE: NA
DESCR: NAro Counter .1.3.6.1.4.1.637.61.1.6.4 |
asamIfExtTableAn extension to the ifTable defined in ITF-MIB.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable. SEQUENCE OF AsamIfExtEntry .1.3.6.1.4.1.637.61.1.6.5 |
asamIfExtEntryAn entry containing management information applicable to a
particular interface. AsamIfExtEntry .1.3.6.1.4.1.637.61.1.6.5.1 |
asamIfExtCustomerIdA textual string identifying the customer assigned to this
interface. Following strings have a special meaning:
'reserved' : the interface is reserved by an operator;
'faulty' : the interface is indicated by an operator
as being faulty;
'available': the interface has no customer assigned to it.
This object is only supported for physical interfaces.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NArw DisplayString .1.3.6.1.4.1.637.61.1.6.5.1.1 |
asamIfExtAlmReportingSeverityThis objects specifies for a certain physical interface and all
interface above in the interface hierarchy the minimal severity for
an alarm to be reported. If no value is provided for this object,
it will obtain the value 'default', which means the actual value is
as specified in the asamIfExtAlmReportingSeverityDefaultTable.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: NA DEFVALUE: 'default'
UNITS: NA SPARSE: NA
DESCR: NArw AsamItfSeverityFilterType .1.3.6.1.4.1.637.61.1.6.5.1.2 |
asamIfExtIfSpecificA reference to MIB definitions specific to the particular media
being used to realize the interface.
If no MIB definitions specific to the particular media are
available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.5.1.3 |
asamNextAvailablePortTypeThis object contains the ifType for which the next available
physical interface can be retrieved. Only values of ifType that
represent physical interfaces are allowed.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: YES
RANGE: NA DEFVALUE: xdslLine
UNITS: NA SPARSE: NA
DESCR: NArw IANAifType (IANAifType-MIB) .1.3.6.1.4.1.637.61.1.6.6 |
asamNextAvailablePortThis object gives the next available physical interface for which
the ifType is as specified in asamNextAvailablePortType. A physical
interface is considered available if its asamIfExtCustomerId has
the value 'available' and its internal ASAM state is 'reachable'.
If no interface of the desired type is available an error (genErr)
is returned when a get-request is issued for this object.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro InterfaceIndex .1.3.6.1.4.1.637.61.1.6.7 |
asamIfExtAlmReportingSeverityDefaultTableA table specifying for each of the supported interface types
for asamIfExtAlmReportingSeverity its default minimal severity.
ALCATEL NOTE:
TABLESIZE: DEP number of supported interface types. SEQUENCE OF AsamIfExtAlmReportingSeverityDefaultEntry .1.3.6.1.4.1.637.61.1.6.8 |
asamIfExtAlmReportingSeverityDefaultEntryAn entry of the asamIfExtAlmReportingSeverityDefaultTable. AsamIfExtAlmReportingSeverityDefaultEntry .1.3.6.1.4.1.637.61.1.6.8.1 |
asamIfExtIfTypeThe type of the interface.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.637.61.1.6.8.1.1 |
asamIfExtAlmReportingSeverityDefaultThe default minimal severity for an alarm to be reported that will
be used for interfaces of the type specified in asamIfExtIfType.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: YES
RANGE: 1-5 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NArw AsamAlarmSeverityType .1.3.6.1.4.1.637.61.1.6.8.1.2 |
asamItfTest OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9 |
asamItfMetallicTestGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1 |
asamItfMetallicTestTypes OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1 |
asamItfMetallicTestLimited OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1.1 |
asamItfMetallicTestTapLooped OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1.2 |
asamItfMetallicTestMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1.3 |
asamItfMetallicTestSplitAccess OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1.4 |
asamItfMetallicTestInwardOnly OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1.5 |
asamItfMetallicTestOutwardOnly OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1.6 |
asamItfMetallicTestResetTimer OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.1.7 |
asamItfMetallicTestCodes OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2 |
asamItfLineNotReachable OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.1 |
asamItfPreparingMetallicTest OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.2 |
asamItfAnotherMetallicTestInProgress OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.3 |
asamItfTestAppliqueNotReachable OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.4 |
asamItfPotsSplitterNotReachable OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.5 |
asamItfWcapNotReachable OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.6 |
asamItfLineBusy OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.7 |
asamItfLineAdminOperAbnormal OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.8 |
asamItfLineAnotherLineTestInProgress OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.9 |
asamItfTestNotPossible OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.6.9.1.2.10 |
asamShelfPhyItfSummaryTableShelf summary table, summarizing status information of physical
interfaces of boards which can be equipped within the
corresponding shelf.
ALCATEL NOTE:
TABLESIZE: DEP number of shelves. SEQUENCE OF AsamShelfPhyItfSummaryEntry .1.3.6.1.4.1.637.61.1.6.10 |
asamShelfPhyItfSummaryEntryAn entry of the shelf physical interface summary table. AsamShelfPhyItfSummaryEntry .1.3.6.1.4.1.637.61.1.6.10.1 |
asamShelfPhyItfNumberChangeOccurredThis is a counter indicating the number of state changes
of physical lines, equipped on boards within this shelf.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: 0
UNITS: state change SPARSE: NA
DESCR: NAro Counter .1.3.6.1.4.1.637.61.1.6.10.1.1 |
asamShelfPhyItfOperStatusThe bitmap for the operational status of the physical interfaces
of boards which can be equipped within this shelf.
MAX_PIF: the maximum number of physical interfaces per board
(lines + IMA).
SLOTS: the maximum number of slots within a shelf
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Up = 1, Down = 0.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: DEP: #slots*#interfaces per board
DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro OCTET STRING .1.3.6.1.4.1.637.61.1.6.10.1.2 |
asamShelfPhyItfBitmapThe bitmap for the presence of the physical interfaces of boards
which can be equipped within this shelf.
MAX_PIF: the maximum number of physical interfaces per board
(lines + IMA).
SLOTS: the maximum number of slots within a shelf
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Present = 1, Not present = 0.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: DEP: #slots*#interfaces per board
DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro OCTET STRING .1.3.6.1.4.1.637.61.1.6.10.1.3 |
asamLluTableThe Local Loop Unbundling Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable SEQUENCE OF AsamLluEntry .1.3.6.1.4.1.637.61.1.6.11 |
asamLluEntryAn entry in the asamLluTable. There will be an entry
for each physical interface line (xdslLine) if the corresponding
board is configured/planned and if the corresponding board
supports LLU, i.e. no entries are auto-created in the MIB
- for boards that are not planned,
- for boards that are planned but for which the HW does
not support LLU.
the operator cannot create an entry nor delete an entry in this
table AsamLluEntry .1.3.6.1.4.1.637.61.1.6.11.1 |
asamLluRelayStatusConfigured administrative status of the relay. This value is kept persistent
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: NA
RANGE: NA DEFVALUE: unbundle
UNITS: NA SPARSE: NA
DESCR: NArw AsamLluRelayStatus .1.3.6.1.4.1.637.61.1.6.11.1.1 |
asamLluRelayActionTimeThe delay in tenths of seconds during which the relay will be in disconnected state before
switching to connected state after asamLluRelayStatus is configured to 'disconnectTimed'
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..864000 DEFVALUE: 50
UNITS: s/10 SPARSE: NA
DESCR: NArw Gauge .1.3.6.1.4.1.637.61.1.6.11.1.2 |
asamLluRelayOperStatusOperational status of the relay. This represents the actual status of the relay at
any time. The value 'disconnectTimed' does not apply in this context
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro AsamLluRelayStatus .1.3.6.1.4.1.637.61.1.6.11.1.3 |
asamLluRelayActionTimerTime in tenths of seconds remaining before switching to connected state after
asamLluRelayStatus is configured to 'disconnectTimed'. 0 means that the
timer associated with disconnectTimed is not active. This can happen when:
- asamLluRelayStatus has never been configured to 'disconnectTimed'
- The timer has been configured with asamLluRelayActionTime = 0
- The timer has expired
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..864000 DEFVALUE: 0
UNITS: s/10 SPARSE: NA
DESCR: NAro Gauge .1.3.6.1.4.1.637.61.1.6.11.1.4 |
asamIfExtCounterSupportTableA Table listing the supported counters for a particular interface .
ALCATEL NOTE:
TABLESIZE: DEP number of supported interface types. SEQUENCE OF AsamIfExtCounterSupportEntry .1.3.6.1.4.1.637.61.1.6.12 |
asamIfExtCounterSupportEntryAn entry containing list of supported counter information applicable to a
particular interface. AsamIfExtCounterSupportEntry .1.3.6.1.4.1.637.61.1.6.12.1 |
asamIfExtCounterIndexA unique non-zero value representing an interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.637.61.1.6.12.1.1 |
asamifTblifDescrA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.2 |
asamifTblifMtuA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.3 |
asamifTblifSpeedA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.4 |
asamifTblifPhysAddressA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.5 |
asamifTblifAdminStatusA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.6 |
asamifTblifOperStatusA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.7 |
asamifTblifLastChangeA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.8 |
asamifTblifInOctetsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.9 |
asamifTblifInUcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.10 |
asamifTblifInNUcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.11 |
asamifTblifInDiscardsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.12 |
asamifTblifInErrorsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.13 |
asamifTblifInUbknownProtosA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.14 |
asamifTblifOutOctetsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.15 |
asamifTblifOutUcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.16 |
asamifTblifOutNUcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.17 |
asamifTblifOutDiscardsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.18 |
asamifTblifOutErrorsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.19 |
asamifxTblifNameA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.20 |
asamifxTblifInMulticastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.21 |
asamifxTblifInBroadcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.22 |
asamifxTblifOutMulticastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.23 |
asamifxTblifOutBroadcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.24 |
asamifxTblifHCInOctetsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.25 |
asamifxTblifHCInUcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.26 |
asamifxTblifHCInMulticastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.27 |
asamifxTblifHCInBroadcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.28 |
asamifxTblifHCOutOctetsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.29 |
asamifxTblifHCOutUcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.30 |
asamifxTblifHCOutMulticastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.31 |
asamifxTblifHCOutBroadcastPktsA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.32 |
asamifxTblifLinkUpDownTrapEnableA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.33 |
asamifxTblifHighSpeedA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.34 |
asamifxTblifPromiscuousModeA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.35 |
asamifxTblifConnectorPresentA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.36 |
asamifxTblifAliasA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.37 |
asamifxTblifCounterDiscontinuityTimeA value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro INTEGER .1.3.6.1.4.1.637.61.1.6.12.1.38 |
asamIfIndexToExtIfIndexMappingTableifIndex to extended ifIndex Mapping Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable. SEQUENCE OF AsamIfIndexToExtIfIndexMappingEntry .1.3.6.1.4.1.637.61.1.6.13 |
asamIfIndexToExtIfIndexMappingEntryAn entry containing mapping from ifIndex to extended
ifIndex of interfaces. AsamIfIndexToExtIfIndexMappingEntry .1.3.6.1.4.1.637.61.1.6.13.1 |
asamExtIfIndexId1Indicates the first indentifier of the extended-ifIndex
INTEGER.xxxx.xxxx.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: Gauge DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro Gauge .1.3.6.1.4.1.637.61.1.6.13.1.1 |
asamExtIfIndexId2Indicates the second indentifier of the extended-ifIndex
xxxx.INTEGER.xxxx.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: Gauge DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro Gauge .1.3.6.1.4.1.637.61.1.6.13.1.2 |
asamExtIfIndexId3Indicates the third indentifier of the extended-ifIndex
xxxx.xxxx.INTEGER.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: Gauge DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro Gauge .1.3.6.1.4.1.637.61.1.6.13.1.3 |
asamExtIfIndexToIfIndexMappingTableExtended-ifIndex to ifIndex Mapping Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable. SEQUENCE OF AsamExtIfIndexToIfIndexMappingEntry .1.3.6.1.4.1.637.61.1.6.14 |
asamExtIfIndexToIfIndexMappingEntryAn entry containing mapping from extended-ifIndex to ifIndex
of interfaces. AsamExtIfIndexToIfIndexMappingEntry .1.3.6.1.4.1.637.61.1.6.14.1 |
asamIfIndexIndicates the ifIndex of the interface.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: ifIndex DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NAro InterfaceIndex .1.3.6.1.4.1.637.61.1.6.14.1.1 |
asamIfPortTypeTableEFM Interface PortType Table.
ALCATEL NOTE:
TABLESIZE: Entry will be equivalent to number of EFM interfaces exist. SEQUENCE OF AsamIfPortTypeEntry .1.3.6.1.4.1.637.61.1.6.15 |
asamIfPortTypeEntryAn entry appears in this table for each EFM interface exist in the system. AsamIfPortTypeEntry .1.3.6.1.4.1.637.61.1.6.15.1 |
asamIfPortTypeThis object identifies the whole network service model based
on this interface.
User Network Interface (UNI) is an interface which
specifies one untrust subscriber is connected.
Network to Network Interface (NNI) is an interface which
specifies one trust networks in connected.
Hicap User Network Interface (HUNI) is an interface which
specifies one untrust subscriber is connected, but with hicapacity
services.
Uplink specifies the interface is at the upside of the ISAM, i.e.
connecting the ISAM to the network.
Lemi is a local ethernet management interface. It is supported only
on a restricted set of systems/cards.
ALCATEL NOTE:
ACCESS : NA USAGE : NA
PERSIST: YES INSRVMOD: NA
RANGE : NA DEFVALUE: uni
UNITS : NA SPARSE : NA
DESCR : This Object is supported only for few LTs.Setting of portType is not allowed for native ethernet interfaces.Setting portType as UNI is allowed for all interfaces except native ethernet.Setting portType as NNI is allowed only for EFM intefaces on supported LTs.For ethernet interfaces (native Ethernet) get command will display the portType from extendEtherPortCtrlTablerw Enumeration .1.3.6.1.4.1.637.61.1.6.15.1.1 |