ASAM-EQUIP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASAM-EQUIP-MIB.
255
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
255 total| Object Name |
|---|
asamEquipmentMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.23 |
SYSTEM-MIB Unknown .1.3.6.1.4.1.637.61.1.23 |
eqptAsam OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.23.1 |
eqptAsamIdUnique identifier of the system.
In practice, this attribute contains the serial number of the most
recently equipped SMAS board within the main shelf.
Notice however that there are also shelves in which the SMAS is replaced
by a GFC board (e.g ARAM-B) or even shelves without SMAS/GFC in which
the serial number of the ACU is taken.
This attribute is used internally by the system in case both NTs
start-up simultaneously to determine whether either the database on
NT-A or the database on NT-B should be used as the systems database.
It's not the intention to make this attribute visible to an operator.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: '' UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.1.1 |
eqptAsamRestartThis attribute is used to restart the system. The persistent data is preserved.
Contains previous restart reason, if not available it contains value 255.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: initialValue (255) UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.1.2 |
eqptMaxRacksPerAsamThis object is initialized by the system and specifies the maximum
number of racks supported by the system.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..7
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.1.3 |
eqptMaxShelvesPerRackThis object is initialized by the system and specifies the maximum
number of shelves which can be equipped within one rack.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.1.4 |
eqptMaxSlotsPerShelfThis object is initialized by the system and specifies the maximum
number of regular slots supported by one shelf.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..22
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.1.5 |
eqptHwNumberOfChangesWrap around counter which indicates the number of configuration or
status changes in the Equipment MIB objects. This counter is
incremented each time any of the summary table objects change.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.1.6 |
eqptProtNumberOfChangesWrap around counter which indicates the overall number of status
changes in the equipment protection MIB objects. This counter is
incremented each time any of the eqptProtGroupNumberOfChanges
counters is incremented.
ALCATEL NOTE:
SUPPORT:YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.1.7 |
eqptRestartNumberOfChangesWrap around counter which indicates the overall number of status
changes in the eqptBoardRestartNumberOfChanges objects in
eqptBoardTable. This counter is incremented each time any of the
eqptBoardRestartNumberOfChanges counters is incremented.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.1.8 |
eqptFanModeParameter indicates the actually applied FAN tray mode:
'default': the fan packs run in average mode, predefined thermal margins are
used for defining/adapting the fan speeds
'eco': the fan packs run in 'green' mode, t.i. the most economical mode, minimal
thermal margins wrt default settings
'protect': the fan packs run in a heavy mode, t.i. wider thermal margins wrt
default settings
'classic': fixed speed settings apply wrt the fan - no SW control
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.1.9 |
eqptHolderTableEquipment holder table, representing the system, the racks and
the shelves.
This table contains one row for the system, one row per rack,
and one row per shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptHolderEntry .1.3.6.1.4.1.637.61.1.23.2 |
eqptHolderEntryAn entry of the equipment holder table.
ALCATEL NOTE:
SUPPORT: YES EqptHolderEntry .1.3.6.1.4.1.637.61.1.23.2.1 |
eqptHolderIdIndex in equipment holder Table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - EqptHolderIndex .1.3.6.1.4.1.637.61.1.23.2.1.1 |
eqptHolderClassClassification of shelves. This object has no meaning for the
system and the rack equipment holders.
Note: for ISAM, only the values mainEthernet (4) and extEthernet (5)
are allowed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: 1..5
PERSIST: YES DEFVALUE: NA UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.2.1.2 |
eqptHolderPlannedTypeA string representing the planned type of equipment holder.
If the equipment holder is planned, the string consists of a
mnemonic, identifying the holder type.
This object is only writable for the entries that represent a shelf.
Other entries get a value corresponding to the detected equipment
practice type.
Following values are valid:
System-types:
=============
LAUS Large ASAM US market (6 racks, 3 shelves per rack)
LAEU Large ASAM EU market (6 racks, 3 shelves per rack)
LEEU Large ESAM EU market (7 racks, 4 shelves per rack)
LEUS Large ESAM US market (7 racks, 4 shelves per rack)
LNEU Large New EquipmentPractise EU market(7 racks, 4 shelves
per rack)
LEWW Large ESAM World Wide (7 racks, 4 shelves per rack)
LNWW Large ESAM World Wide (7 racks, 4 shelves per rack)
Rack-types:
===========
ALTR-A ADSL Line Termination Rack version A (US)
ALTR-E ADSL Line Termination Rack version E (ETSI 2200mm)
Shelf-types:
============
<SHELF_MNEMONIC> A shelf of a specific type. Refer to the ETSI
Configurations and US Configurations documents
for the list of shelf types that are supported
in a given system release.
NOT_PLANNED The shelf is not planned.
NOT_ALLOWED Shelf planning is not allowed in this position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.2.1.3 |
eqptHolderActualTypeA string representing the actual equipment holder type.
Following values are possible:
<HOLDER_MNEMONIC> Indicates the detected equipment holder-type.
Uses same mnemonics as described in object
eqptHolderPlannedType.
EMPTY Equipment holder is not detected
UNKNOWN The type of the detected holder is unknown.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.2.1.4 |
eqptHolderAdminStatusUsed by the administrator to lock or unlock an equipment holder.
This attribute is only supported for shelves.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 1 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.2.1.5 |
eqptHolderOperStatusThis attribute identifies whether or not the equipment holder is
capable of performing its normal functions.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.2.1.6 |
eqptHolderOperErrorThis attribute describes for what reason the equipment holder is
not operational. These values correspond with the alarms that are
generated in case of a failure.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4, 15
PERSIST: NO DEFVALUE: 1 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.2.1.7 |
eqptHolderAvailStatusThis attribute indicates whether the equipment holder is
available or not.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.2.1.8 |
eqptHolderDescriptionText-field, which can for instance be used to describe the
location of the equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: '' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.2.1.9 |
eqptHolderContainerIdThis attribute describes in which equipment holder the equipment
holder is contained.
This object is only meaningful for racks and shelves, since the
system itself has no containing equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.2.1.10 |
eqptHolderContainerOffsetThis attribute describes the position of the equipment holder
in the containing equipment holder.
This object is only meaningful for racks and shelves, since the
system itself has no containing equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.2.1.11 |
eqptHolderModeThis attribute identifies the holder mode and is used by
both the NEP shelf and the ARAM-E shelf:
ntbntio-supported: this mode works in the same manner as iSAM XD. The
LSM can only be used on LSM slot. NT in NTB is supported. NTIO is
also supported.
ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as
LT slot. So, two more LSM can be supported in this mode. Therefore,
NTIO/NTB board is not supported.
ntb-unsupported: In this mode, NTB slot can be used as LT slot.
So one more LT can be supported in this mode. Therefore, NTB board will
not be supported. This mode is applicable for NFXS-B shelf only.
ntio-unsupported: In this mode, there is no NTIO; the slot can be
used for an LSM.
DEFAULTVALUE: The default Value of the eqptHolderMode depends
on the shelf type. In the case of ARAM-E, default will be ntio-unsupported.
All other shelves will default to ntbntio-supported mode.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: Yes DEFVALUE: See above UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.2.1.12 |
eqptHolderSerialNumberThis attribute represents the serial number of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.2.1.13 |
eqptHolderVariantThis attribute represents the ALU code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.2.1.14 |
eqptHolderICScodeThis attribute represents the Item Change Status iteration
code of the shelf.
NOT available If FIM < 25 in RI, this attribute could not be retrieved.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.2.1.15 |
eqptBoardTableA table representing the slots of all planned shelves. Each slot
can hold a board of one of the following types: NT, EXT, LSM,
ACU, CTRL, applique.
This table has a row for each slot in each planned shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptBoardEntry .1.3.6.1.4.1.637.61.1.23.3 |
eqptBoardEntryAn entry in the eqptBoardTable.
ALCATEL NOTE:
SUPPORT: YES EqptBoardEntry .1.3.6.1.4.1.637.61.1.23.3.1 |
eqptSlotIdA unique value to identify a slot position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: - EqptSlotIndex .1.3.6.1.4.1.637.61.1.23.3.1.1 |
eqptSlotPlannedTypeA string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is planned in the slot. If the board is planned, the string consists
of a mnemonic that identifies the board-type.
Following mnemonics are valid:
<BOARD_MNEMONIC> A board of a specific type. Refer to the ETSI and
US Configurations documents for the list of boards
that are supported in a given release.
ODM board types are planned with the board mnemonic,
they are treated as unmanaged boards.
EXT_MANAGED The presence of the LT module can be detected but
it is not managed by this NT in the HYNT module.
The LT type must be planned on the other NT.
UNMANAGED Unmanaged board: this means that the presence of
the board can be detected and that the board can
be reset and powered-down but that it is not
possible to establish communication with the board
in software.
NOT_PLANNED No board is planned in the slot.
NOT_ALLOWED Slot planning is not allowed in this position.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 'NOT_PLANNED' UNITS: -rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.2 |
eqptSlotActualTypeA string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is actually present in the slot.
Following values are possible:
<BOARD_MNEMONIC> Indicates the detected board-type. Uses same
mnemonics as described in object
eqptSlotPlannedType.
EMPTY No board plugged within this slot.
EXT_MANAGED The presence of the LT module can be detected but
it is not managed by this NT in the HYNT module.
The LT type must be planned on the other NT.
UNMANAGED The type of the detected board is unknown
and the planned board type is UNMANAGED or ODMboardtype.
UNKNOWN The type of the detected board is unknown
and the planned board type is not UNMANAGED
and the planned board type is not EXT_MANAGED.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.3 |
eqptSlotPowerStatusThis attribute is used by the operator to power-up or power-down
an LSM slot. This attribute is not supported for other type of slots.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: 1 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.4 |
eqptBoardAdminStatusThis attribute is used by the operator to lock or unlock the board.
This attribute is only supported for the following type of boards:
NT (but notice that the system will refuse a request to lock the NT
of a simplex system), EXT and LSM (if managed). This attribute has
no meaning for an unmanaged or externally managed (EXT_MANAGED) LSM,
for an ACU, CTRL or for an applique. An exception is the NRCD-C, CTRL
board of the FD-REM, that has LT capabilities next to the regular
CTRL capabilities.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: 1 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.5 |
eqptBoardOperStatusThis attribute informs the operator whether the plug-in unit is able
to perform its normal operation.
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.6 |
eqptBoardOperErrorThis attribute describes for what reason the board is not operational.
These values correspond with the alarms which are generated in case of
a failure.
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
Default value is no-error, replaced by result from startup sequence.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..15, 255
PERSIST: NO DEFVALUE: 1 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.7 |
eqptBoardAvailStatusThis attribute provides further information regarding the state
of the board. It is set to available after a successfull selftest
of the board (if applicable).
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..7
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.8 |
eqptBoardRestartWriting a valid value to this object will restart the board in the
specified mode.
This attribute is only supported for the following type of boards:
NT, EXT, managed LSM, ACU, CTRL. For ACU and CTRL boards, only a
restart without selftest is supported. An exception is the NRCD-C,
FD-REM CTRL board, that has LT capabilities (restart with/without
selftest) next to the regular CTRL capabilities.
Contains previous restart reason, if not available it has value 255.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1, 2, 5, 255
PERSIST: YES DEFVALUE: NA UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.9 |
eqptBoardSwOverruleStatusUsed to overrule the default software version for this board.
This attribute is only supported for managed LSMs.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: NO DEFVALUE: 1 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.10 |
eqptBoardContainerIdThis attribute describes in which equipment holder the slot
is contained.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.3.1.11 |
eqptBoardContainerOffsetThis attribute describes the position of the slot in the
containing equipment holder.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.3.1.12 |
eqptBoardInventoryAlcatelCompanyIdThis attribute represents the company of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.13 |
eqptBoardInventoryTypeNameThis attribute represents the name of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.14 |
eqptBoardInventoryPBACodeThis attribute represents the Alcatel Printed Board Assembly
code of of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.15 |
eqptBoardInventoryFPBACodeThis attribute represents the Alcatel Printed Board Assembly
code of the board, which also identifies the boot software.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.16 |
eqptBoardInventoryICScodeThis attribute represents the Item Change Status iteration
code of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.17 |
eqptBoardInventoryCLEICodeThis attribute represents the (USA) Common Language Equipment
Identification code of the board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.18 |
eqptBoardInventorySerialNumberThis attribute represents the serial number of the board.
Breakdown of a sample serial number is :
sample NANT-D serial number is AA1003ZA028
AA 10 03 ZA028
| | |=====' Production Plant Code
| |
| |==============' Week
|
|====================' Year
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.19 |
eqptBoardInventoryLastFailedTestIdentifies the last failing test by means of 4 numbers, from MSB
to LSB:
- Table number (1 byte)
- Segment number (1 byte)
- Case number (1 byte)
- Check number (1 byte)
As long as there has been no failing selftest, the value of this
object will be 0.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.3.1.20 |
eqptSlotPlannedCapabilityProfileA pointer to the capability profile that will be used for this
slot. Capability profiles are only applicable for LT cards
that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTIO cards.
Planning the profile should always be done at the same moment the
LT/NTIO is planned.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -rw AsamProfilePointer .1.3.6.1.4.1.637.61.1.23.3.1.22 |
eqptBoardCustAlarmProfileA pointer to the customizable alarms profile which will be
associated to NT for all shelves except FD-REM where the
customizable alarms profile will be associated to master LT.
In redundant NT shelves the profile will be associated to
both NTA and NTB while associating customizable alarms profile
to NTA or NTB.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -rw AsamProfilePointer .1.3.6.1.4.1.637.61.1.23.3.1.23 |
eqptBoardLastRestartCauseThis attribute gives the last restart cause for board.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: unknown UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.3.1.24 |
eqptBoardLastRestartTimeThis attribute gives the last restart time.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro NetworkTimeInSeconds .1.3.6.1.4.1.637.61.1.23.3.1.25 |
eqptBoardRestartNumberOfChangesWrap around counter which indicates the number of restart times.
This counter is incremented each time eqptBoardLastRestartTime
changes. Considering future safe, only use default value for
other board entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.3.1.26 |
eqptBoardRelatedMgntEntityIPAddressNetwork address. It is a public OAM IP address related to xVPS. For
single OAM IP is introduced, multi-xVPS boards existing on a same shelf
may use one single OAM IP. This IP is configured on NT which manages
these xVPS boards.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE:
PERSIST: NO DEFVALUE: 0 UNITS: -ro IpAddress .1.3.6.1.4.1.637.61.1.23.3.1.27 |
eqptBoardRelatedMgntEntityPairedNumberFor single OAM IP is introduced, one public OAM IP can not identify an
xVPS, so community string is introduced. Each active xVPS will have
different community string in one shelf.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE:
PERSIST: NO DEFVALUE: 0 UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.3.1.28 |
eqptBoardDualHostIPAddressNetwork address. Only applicable for FD REM connected to dual host.
It is the public OAM IP address of the host connecting the Lsm in this
externally managed slot. It is instantiated with default value and
can only be set when the planned type is EXT_MANAGED.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE:
PERSIST: YES DEFVALUE: 0 UNITS: -rw IpAddress .1.3.6.1.4.1.637.61.1.23.3.1.29 |
eqptBoardDualHostLsmLocationOnly applicable for FD REM connected to dual host.
It is the Rack/Shelf identifying the location of this
externally managed slot, within the scope of the host connecting
the Lsm. The slot component is implicitly present in the key.
It is instantiated with default value and can only be set when
the planned type is EXT_MANAGED. The type corresponds to the
type EqptHolderIndex, except for the fact that this field can
be 0, which is the default value.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -rw EqptHolderIndexOrZero .1.3.6.1.4.1.637.61.1.23.3.1.30 |
eqptBoardIfSlotIdThis object gives the slot's linear number, which could be
used by an external manager to help in mapping a given
IfIndex to a physical slot location. It is a numerical value
that consists of 6 bits. For a slot that does not carry any
interfaces (e.g. applique or NTIO slot), the value is always
'0xFF'.
Note that this linear slot number is persistent across system
restarts, i.e. the same linear slot number will be used for
the same slot even after a restart of the ISAM system.
However, it is not guaranteed that the same linear slot
number will used after a migration to a new release.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 0xFF UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.3.1.32 |
eqptBoardRestartCountPerLtWrap around counter which indicates the number of restart times per LT.
This counter is incremented each time eqptBoardLastRestartTime
changes.This counter will reset to zero when LT replaced or unplanned.
Note:This counter is Per LT basis. LTs are distinguished based on serialNumber.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: NAro Counter .1.3.6.1.4.1.637.61.1.23.3.1.33 |
eqptBoardClearRestartCountPerLtThis object is a button-like object to reset the eqptBoardRestartCountPerLt counter.
When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is cleared.
A value set to false(2) or other is ignored..
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: FALSE UNITS: NArw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.3.1.34 |
eqptShelfSummaryTableShelf summary table, summarizing slot or board related status
changes within each shelf.
This table has one row per planned shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above. SEQUENCE OF EqptShelfSummaryEntry .1.3.6.1.4.1.637.61.1.23.4 |
eqptShelfSummaryEntryAn entry of the shelf summary table.
ALCATEL NOTE:
SUPPORT: YES EqptShelfSummaryEntry .1.3.6.1.4.1.637.61.1.23.4.1 |
eqptShelfHwNumberOfChangesWrap around counter which indicates the number of configuration or
status changes for slots/boards within this shelf. This counter
is incremented each time any of the summary table objects of this
shelf changes.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.4.1.1 |
eqptShelfSlotSummaryOccupationBitmap of the occupation of slots (0 = empty, 1 = full)
Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.4.1.2 |
eqptShelfBoardSummaryAdminBitmap of the administrative state of the boards
(0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.4.1.3 |
eqptShelfBoardSummaryAvailBitmap of the availability state of the boards (0 = not available,
1 = available). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.4.1.4 |
eqptShelfBoardSummaryOperBitmap of the operational state of the boards (0 = locked,
1 = unlocked). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.4.1.5 |
eqptShelfBoardSummaryTypeMismatchBitmap of the mismatch between the actual board-type and the planned
board-type (0 = mismatch, 1 = no mismatch).
Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.4.1.6 |
eqptShelfBoardSummaryAlarmBitmap of the boards which generated an alarm (0 = alarm,
1 = no alarm). Applicable for NT, EXT, LSM, ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.4.1.7 |
eqptProt OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.23.5 |
eqptProtNextProtGroupIdThis object contains an appropriate value to be used for
eqptProtGroupId when creating entries in the eqptProtGroupTable.
The value 0 indicates that no unassigned entries are available.
After each retrieval, the agent will modify the value to the
next unassigned index.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.5.1 |
eqptProtGroupTableA table representing groups of protected or protecting elements.
Only one row for NT protection group which will always be created and
cannot be deleted.
From ISAM R4.1.02 the default created NT protection group will be locked.
(before it was unlocked).
From R3.3 onwards, each LT protection group (comprised of 2 adjacent
slots LT n and LT n+1, where n is a odd number), also has a row.
The protection groups are created by default even though
the protection groups are not used.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptProtGroupEntry .1.3.6.1.4.1.637.61.1.23.5.2 |
eqptProtGroupEntryAn entry of the eqptProtGroupTable.
ALCATEL NOTE:
SUPPORT: YES EqptProtGroupEntry .1.3.6.1.4.1.637.61.1.23.5.2.1 |
eqptProtGroupIdA unique value to identify a protection group.
The value 1 is reserved for the NT protection group,
which is always present and cannot be deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: - INTEGER .1.3.6.1.4.1.637.61.1.23.5.2.1.1 |
eqptProtGroupTypeThis attributes distinguishes between 1+1 and 1:N protection groups.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: one-plus-one(1) UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.5.2.1.2 |
eqptProtGroupNumberOfChangesWrap around counter which indicates the number of status changes
in this protection group as well as the status changes for the
protecting elements within this group:
eqptProtGroupSwitchoverCount;
eqptProtGroupLastSwitchoverReason;
eqptProtGroupAlarmBitmap;
eqptProtElementStandbyStatus.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.5.2.1.3 |
eqptProtGroupSwitchoverCountWrap around counter for the number of switchovers being performed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.5.2.1.4 |
eqptProtGroupLastSwitchoverReasonThis object contains the reason of the last switch over.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
PERSIST: YES DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.5.2.1.5 |
eqptProtGroupEpsQuenchfactorThis object contains a timervalue in 1/100 sec. The EpsQuench timer
is used to prevent continuous switch-overs in case of unstable EPS.
Value equal to zero means the quenching mechanism is disabled.
Configuration of the EPS quenchfactor has mainly be foreseen for
test purposes. Operators should preferably not be able to
reconfigure the default value.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: 1440000 UNITS: 0.01 secondsrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.637.61.1.23.5.2.1.6 |
eqptProtGroupAlarmBitmapStatus bitmap:
bit 0 set means No defect at all
bit 1 : if bit set, Standby degradation alarm is set
(excludes bit 0 setting)
bit 2 .. 31 : reserved for future extensions.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0x00000001 UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.5.2.1.7 |
eqptProtGroupAdminStatusUsed by the administrator to disable or enable protection within
that protection group.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: unlock(1) UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.5.2.1.8 |
eqptProtGroupAdminProtElementOnly supported for 1:N protection groups. In case of a forced
switchover to the spare element, this attribute is used to specify
the element to be protected. The value 0 means that no element is
specified.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -rw INTEGER .1.3.6.1.4.1.637.61.1.23.5.2.1.9 |
eqptProtGroupOperProtElementOnly supported for 1:N protection groups. Indicates which element
is currently protected by the spare element. The value 0 means that
currently the spare element is not protecting any element.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.5.2.1.10 |
eqptProtGroupRowStatusEntries in the eqptProtGroupTable can only be created at once, by
specifying eqptProtGroupRowStatus=createAndGo(4).
For NT protection group, if all values are valid then the
entry is made active(1). For LT protection group, if the group
is in service then the entry is made active(1). If the group
is not in service then the entry is made notInService(2).
If the object is set to destroy(6), the entry is deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
PERSIST: NO DEFVALUE: active(1) UNITS: -rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.5.2.1.11 |
eqptProtElementTableA table representing the protected or protecting elements.
An element can be either a board or an extension chain. Both are
identified by the corresponding slot identifier (extension chain
is identified by slot of corresponding NT board).
This table has only two rows from ISAM R2.2 to R3.2.
From R3.3 onwards, this table has a row for each slots in the
main shelf.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptProtElementEntry .1.3.6.1.4.1.637.61.1.23.5.3 |
eqptProtElementEntryAn entry of the eqptProtElementTable.
ALCATEL NOTE:
SUPPORT: YES EqptProtElementEntry .1.3.6.1.4.1.637.61.1.23.5.3.1 |
eqptProtElementGroupIdThis attributes identifies the protection group to which this
element belongs.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -rw INTEGER .1.3.6.1.4.1.637.61.1.23.5.3.1.1 |
eqptProtElementTypeThis attribute is used to distinguish between normal elements of
a protection group and the spare element of a 1:N protection group.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: normal(1) UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.5.3.1.2 |
eqptProtElementStandbyStatusThis attribute reflects the standby status of the protection
group element.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.5.3.1.3 |
eqptProtElementRedcyCtrlStatusThis attribute is used to force a switchover between elements of
a protection group or to keep one of the elements active.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: normal(1) UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.5.3.1.4 |
eqptProtElementRowStatusEntries in the eqptProtElementTable can only be created at once,
by specifying eqptProtEelementRowStatus=createAndGo(4). If all
values are valid then the entry is made active(1). If the object
is set to destroy(6), the entry is deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: active(1) UNITS: -rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.5.3.1.5 |
eqptProtElementStandbyStatuschangeReasonThis attribute reflects the reason why the standby status of the protection group element has changed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..24
PERSIST: NO DEFVALUE: none(0) UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.5.3.1.6 |
eqptProfile OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.23.6 |
eqptProfileTableA table holding the mapping between the profileId and the corresponding
profile name.
This table has a row for every profile in the system.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptProfileEntry .1.3.6.1.4.1.637.61.1.23.6.1 |
eqptProfileEntryAn entry in the eqptProfileTable.
ALCATEL NOTE:
SUPPORT: YES EqptProfileEntry .1.3.6.1.4.1.637.61.1.23.6.1.1 |
eqptProfileIdA value identifying a profile.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -ro AsamProfileIndex .1.3.6.1.4.1.637.61.1.23.6.1.1.1 |
eqptProfileNameThe corresponding name for a given profile id.
The name corresponding to the ProfileId must also be unique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro AsamProfileName .1.3.6.1.4.1.637.61.1.23.6.1.1.2 |
eqptProfileDescriptionA short description for the given profile, explaining the
key attributes.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.6.1.1.3 |
eqptProfileApplicabilityTableThis table lists for every defined profile in the system for
which boards it is applicable.
One profile can be applicable for multiple board types.
Multiple profiles can be applicable for the same board type.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptProfileApplicabilityEntry .1.3.6.1.4.1.637.61.1.23.6.2 |
eqptProfileApplicabilityEntryAn entry in the eqptProfileApplicabilityTable.
ALCATEL NOTE:
SUPPORT: YES EqptProfileApplicabilityEntry .1.3.6.1.4.1.637.61.1.23.6.2.1 |
eqptBoardTypeA string representing the board for which the profile is applicable.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.6.2.1.1 |
eqptDefaultProfileA flag indicating if this is the default profile for a specific
board type.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.6.2.1.2 |
eqptTestChainTableA table contains the test chain configuration indicating
which shelf is connected to the TAP_UP or whether an external
test head is connected to the TAP_UP. This table has one row
for each planned shelf.
ALCATEL NOTE:
TABLESIZE: DEP as described above SEQUENCE OF EqptTestChainEntry .1.3.6.1.4.1.637.61.1.23.7 |
eqptTestChainEntryAn entry in the eqptTestChainTable. EqptTestChainEntry .1.3.6.1.4.1.637.61.1.23.7.1 |
eqptTestChainShelfToTapUpA unique value to identify a shelf position which is connected
to the TAP_UP. The value '0' (default value) indicates that it
is not connected. This parameter is used if
eqptTestChainExtTestHeadToTapUp is set to '1' (i.e., 'no') and
is ignored if eqptTestChainExtTestHeadToTapUp is set to '2'
(i.e., 'yes').
ALCATEL NOTE:
ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES
RANGE: DEP / 0 plus the range of eqptHolderId of the shelves.
DEFVALUE: 0 / this means that no shelf is configured to be
connected to the TAP_UP.
UNITS: NA SPARSE: NO DESCR: NArw INTEGER .1.3.6.1.4.1.637.61.1.23.7.1.1 |
eqptTestChainExtTestHeadToTapUpThis parameter is used to indicate whether an external test
head is connected to the TAP_UP.
no (1): no external test head is connected to the TAP_UP.
yes (2): an external test head is connected to the TAP_UP.
ALCATEL NOTE:
ACCESS: NA USAGE: OPT PERSIST: YES
INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1
UNITS: NA SPARSE: NO DESCR: NArw Enumeration .1.3.6.1.4.1.637.61.1.23.7.1.2 |
eqptCustAlarmProfile OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.23.8 |
eqptCustAlarmProfileIndexNextThis object contains an appropriate value to be used for
eqptCustAlarmProfileIndex
when creating entries in the associated profile table.
The value 0 indicates that no unassigned entries are
available. To obtain the profile index value for a new
entry, the manager issues a management protocol retrieval
operation to obtain the current value of this object.
After each retrieval, the agent should modify the value to
the next unassigned index.ro AsamNextProfileIndex .1.3.6.1.4.1.637.61.1.23.8.1 |
eqptCustAlarmProfileTableA table representing the configurable attributes of the customizable
alarms : a description, and the corresponding Alarm Outputs to be
activated when this alarm occurs.
This table has a row for each external alarms profile. It offers data
for a maximum of 5 external alarms. Alarms that are not defined for
a particular profile, need to contain default values in the fields
corresponding to that alarm number. Independent of the alarm number,
the name of the profile is also present, as well as the row status.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptCustAlarmProfileEntry .1.3.6.1.4.1.637.61.1.23.8.2 |
eqptCustAlarmProfileEntryAn entry in the eqptCustAlarmProfileTable.
ALCATEL NOTE:
SUPPORT: YES EqptCustAlarmProfileEntry .1.3.6.1.4.1.637.61.1.23.8.2.1 |
eqptCustAlarmProfileIndexThe Customizale Alarms Profile Index.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
PERSIST: YES DEFVALUE: NA UNITS: -ro AsamProfileIndex .1.3.6.1.4.1.637.61.1.23.8.2.1.1 |
eqptCustAlarmProfileNameA textual name uniquely identifying this profile.
Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -rw AsamProfileName .1.3.6.1.4.1.637.61.1.23.8.2.1.2 |
eqptCustAlarmProfileUsedStatusIndicates the number of entities using this profile. If the
reference count is greater than 0, then this profile is 'in use',
and may NOT be deleted. If the value is 0, then this profile is
'not in use', and can be deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -ro AsamProfileRefCount .1.3.6.1.4.1.637.61.1.23.8.2.1.3 |
eqptCustAlarmProfileRowStatusEntries in the eqptCustAlarmProfileTable can only be created at
once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4).
If all values are valid then the entry is made active(1). If the
object is set to destroy(6), the entry is deleted.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: active(1) UNITS: -rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.8.2.1.4 |
eqptCustAlarmProfileMnemonic1The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 1.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.5 |
eqptCustAlarmProfileDescription1The description of the customizable alarm, for given
Profile Index, for external alarm number 1.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.6 |
eqptCustAlarmProfileVisibleOutput1Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.7 |
eqptCustAlarmProfileAudibleOutput1Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.8 |
eqptCustAlarmProfilePolarity1Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -rw EqptCustAlarmProfilePolarityType .1.3.6.1.4.1.637.61.1.23.8.2.1.9 |
eqptCustAlarmProfileSeverity1Shows the severity of the alarm,
for given Profile Index, for external alarm number 1.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -rw AsamAlarmSeverityType .1.3.6.1.4.1.637.61.1.23.8.2.1.10 |
eqptCustAlarmProfileMnemonic2The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 2.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.11 |
eqptCustAlarmProfileDescription2The description of the customizable alarm, for given
Profile Index, for external alarm number 2.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.12 |
eqptCustAlarmProfileVisibleOutput2Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.13 |
eqptCustAlarmProfileAudibleOutput2Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.14 |
eqptCustAlarmProfilePolarity2Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2), UNITS: -rw EqptCustAlarmProfilePolarityType .1.3.6.1.4.1.637.61.1.23.8.2.1.15 |
eqptCustAlarmProfileSeverity2Shows the severity of the alarm,
for given Profile Index, for external alarm number 2.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -rw AsamAlarmSeverityType .1.3.6.1.4.1.637.61.1.23.8.2.1.16 |
eqptCustAlarmProfileMnemonic3The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 3.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.17 |
eqptCustAlarmProfileDescription3The description of the customizable alarm, for given
Profile Index, for external alarm number 3.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.18 |
eqptCustAlarmProfileVisibleOutput3Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.19 |
eqptCustAlarmProfileAudibleOutput3Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.20 |
eqptCustAlarmProfilePolarity3Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -rw EqptCustAlarmProfilePolarityType .1.3.6.1.4.1.637.61.1.23.8.2.1.21 |
eqptCustAlarmProfileSeverity3Shows the severity of the alarm,
for given Profile Index, for external alarm number 3.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -rw AsamAlarmSeverityType .1.3.6.1.4.1.637.61.1.23.8.2.1.22 |
eqptCustAlarmProfileMnemonic4The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 4.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.23 |
eqptCustAlarmProfileDescription4The description of the customizable alarm, for given
Profile Index, for external alarm number 4.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.24 |
eqptCustAlarmProfileVisibleOutput4Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.25 |
eqptCustAlarmProfileAudibleOutput4Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.26 |
eqptCustAlarmProfilePolarity4Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -rw EqptCustAlarmProfilePolarityType .1.3.6.1.4.1.637.61.1.23.8.2.1.27 |
eqptCustAlarmProfileSeverity4Shows the severity of the alarm,
for given Profile Index, for external alarm number 4.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -rw AsamAlarmSeverityType .1.3.6.1.4.1.637.61.1.23.8.2.1.28 |
eqptCustAlarmProfileMnemonic5The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 5.
Maximum length is 16, allowed characters A-Z.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'UNDEF' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.29 |
eqptCustAlarmProfileDescription5The description of the customizable alarm, for given
Profile Index, for external alarm number 5.
Maximum length is 40.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 'Undefined' UNITS: -rw DisplayString .1.3.6.1.4.1.637.61.1.23.8.2.1.30 |
eqptCustAlarmProfileVisibleOutput5Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.31 |
eqptCustAlarmProfileAudibleOutput5Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: notTriggered(2) UNITS: -rw EqptCustAlarmProfileOutputType .1.3.6.1.4.1.637.61.1.23.8.2.1.32 |
eqptCustAlarmProfilePolarity5Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: normal(2) UNITS: -rw EqptCustAlarmProfilePolarityType .1.3.6.1.4.1.637.61.1.23.8.2.1.33 |
eqptCustAlarmProfileSeverity5Shows the severity of the alarm,
for given Profile Index, for external alarm number 5.
ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -rw AsamAlarmSeverityType .1.3.6.1.4.1.637.61.1.23.8.2.1.34 |
eqptCustAlarmProfileMappingTableThe table listing the profile name to profile Index
Mapping. SEQUENCE OF EqptCustAlarmProfileMappingEntry .1.3.6.1.4.1.637.61.1.23.8.3 |
eqptCustAlarmProfileMappingEntryAn entry (conceptual row) representing the Customizable Alarm Profile
Name to Index mapping. The system automatically creates an entry in
this table for each corresponding entry (custAlarm-profile) created
in the eqptCustAlarmProfileTable. Similarly, when a profile is
deleted, the corresponding entry in this table is also automatically
deleted by the system. EqptCustAlarmProfileMappingEntry .1.3.6.1.4.1.637.61.1.23.8.3.1 |
eqptCustAlarmProfileMappingNameA textual name uniquely identifying this profile.
This name has to be unique within the assigned scope.
Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: - AsamProfileName .1.3.6.1.4.1.637.61.1.23.8.3.1.1 |
eqptCustAlarmProfileMappingIndexThe Customizale Alarms Profile Index.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
PERSIST: YES DEFVALUE: NA UNITS: -ro AsamProfileIndex .1.3.6.1.4.1.637.61.1.23.8.3.1.2 |
eqptMtaTest OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.23.9 |
eqptMtaTestHeadTypesetting the MTA test head type, four-wire mode or two-wire mode.
This object should be consistent with external test head equipment,
MTA subsystem will operate different relays based on this object.
MTA commands will have differentiation between these two mode.
ALCATEL NOTE:
ACCESS: NA USAGE: OPT PERSIST: YES
INSRVMOD: YES RANGE: 1..2 DEFVALUE: 1
UNITS: NA SPARSE: NO DESCR: NArw Enumeration .1.3.6.1.4.1.637.61.1.23.9.1 |
eqptBoardThermalSensorTableA table representing the actual value and thresholds of Thermal Sensor(s) on boards.
One entry corresponds to each sensor on board.
The entries are presented only when the board is plugged in, operationally up, has thermal sensors on it, and when operator put a read request for it.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptBoardThermalSensorEntry .1.3.6.1.4.1.637.61.1.23.10 |
eqptBoardThermalSensorEntryAn entry of the equipment thermal sensor table on boards
ALCATEL NOTE:
SUPPORT: YES EqptBoardThermalSensorEntry .1.3.6.1.4.1.637.61.1.23.10.1 |
eqptBoardThermalSensorIdIndex of thermal sensors on board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..15
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.10.1.1 |
eqptBoardThermalSensorActualTemperatureActual Temperature value read from thermal sensor on board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: -40..150
PERSIST: NO DEFVALUE: NA UNITS: degree Celsiusro INTEGER .1.3.6.1.4.1.637.61.1.23.10.1.2 |
eqptBoardThermalSensorTcaThresholdLowLow Tca threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsiusro INTEGER .1.3.6.1.4.1.637.61.1.23.10.1.3 |
eqptBoardThermalSensorTcaThresholdHighHigh Tca threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsiusro INTEGER .1.3.6.1.4.1.637.61.1.23.10.1.4 |
eqptBoardThermalSensorShutdownThresholdLowLow Shutdown threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsiusro INTEGER .1.3.6.1.4.1.637.61.1.23.10.1.5 |
eqptBoardThermalSensorShutdownThresholdHighHigh Shutdown threshold of thermal sensor on Board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsiusro INTEGER .1.3.6.1.4.1.637.61.1.23.10.1.6 |
eqptPortMappingTableEquipment PortMapping table, showing the mapping between logical ports
and physical ports (faceplate numbering).
This table contains one row per logical port on the xHUB.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptPortMappingEntry .1.3.6.1.4.1.637.61.1.23.13 |
eqptPortMappingEntryAn entry of the equipment PortMapping table.
ALCATEL NOTE:
SUPPORT: YES EqptPortMappingEntry .1.3.6.1.4.1.637.61.1.23.13.1 |
eqptPortMappingLogPortNbrIndex in equipment PortMapping Table: corresponds to the logical
port id on the xHUB.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - EqptPortMappingIndex .1.3.6.1.4.1.637.61.1.23.13.1.1 |
eqptPortMappingLogPortTypeThe logical port type corresponds to the link classification.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.13.1.2 |
eqptPortMappingPhyPortSlotThe equipment slot index of the physical port.
This slot will point to either a NT or NTIO slot position.
This field is not applicable for hostlinks or internal, in which case it gets
the value 0xFFFF
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro EqptSlotIndex .1.3.6.1.4.1.637.61.1.23.13.1.3 |
eqptPortMappingPhyPortTypeThe physcial port type.
This field is not applicable for hostlinks.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.13.1.4 |
eqptPortMappingPhyPortNbrThe pysical port number, which corresponds to the faceplate number
of the sfp/xfp port.
This field is not applicable for hostlinks or internal, in which case it gets
the value 0xFF.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.13.1.5 |
eqptPortMappingLSMSlotThe equipment slot index of the corresponding LSM slot.
This field is only applicable for hostlinks, and downlinks to which
a remote LSM slot is assigned. In other cases it gets the value
0xFFFF.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro EqptSlotIndex .1.3.6.1.4.1.637.61.1.23.13.1.6 |
eqptPortMappingChangesThis counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX
PERSIST: NO DEFVALUE: 0 UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.13.1.7 |
eqptPortMappingGlobalChangeCounterThis counter represents the number of global PortMapping configuration changes. It is a wraparound counter between 0 and MAX.
SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX
PERSIST: NO DEFVALUE: 0 UNITS: -ro Counter .1.3.6.1.4.1.637.61.1.23.14 |
eqptPortProtectionTableThis table holds the port protection groups SEQUENCE OF EqptPortProtectionEntry .1.3.6.1.4.1.637.61.1.23.15 |
eqptPortProtectionEntryThis entry represents a protection group which consists of two
ports. These two ports can be on the same LT board, or on
different LT's. EqptPortProtectionEntry .1.3.6.1.4.1.637.61.1.23.15.1 |
eqptPortProtectionPortIdEach row is indexed by the IfIndex of the
primary port of the protection group, the one which
is protected.
Only PON ports can be selected.ro InterfaceIndex .1.3.6.1.4.1.637.61.1.23.15.1.1 |
eqptPortProtectionRowStatusAll rows instantiated using 'create-and-go' to
mate 2 ports in a protection group. Set to 'destroy' to
eliminate the protection group.
RULE 1 - Cannot create a protection group on an LT card
that doesn't support any-to-any redundancy.
RULE 2 - Cannot mate two ports in a protection group if
the paired port has already one or more
interface(s) defined on top of the physical link
interface.
RULE 3 - Cannot delete a protection group if paired
port is Admin UP.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.15.1.2 |
eqptPortProtectionPairedPortIdThis attribute represents the IfIndex of the paired
port. Only PON ports can be selected.
Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
1) IfIndex must represent a real port.
2) PON cannot have any provisioned (planned) ONTs.
3) Cannot mate a PON with itself.
4) Cannot mate with a PON that is already mated in a
protection scheme.rw InterfaceIndex .1.3.6.1.4.1.637.61.1.23.15.1.3 |
eqptPortProtectionPortStatusThis attribute represents the status of the primary port.
Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the system is NOT using the port for
transmission.
Up - means the port is capable of being used for
transmission/reception.
Down - means the port is NOT capable of being used for
transmission/reception (this includes a port that is
ADMIN down as well as a port that is down due to an
operational fault).
Enumerations are as follows:
1 = Active Up
2 = Active Down
3 = Inactive Up
4 = Inactive Downro INTEGER .1.3.6.1.4.1.637.61.1.23.15.1.4 |
eqptPortProtectionPairedPortStatusThis attribute represents the status of the paired
port.
Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the system is NOT using the port for
transmission.
Up - means the port is capable of being used for
transmission/reception.
Down - means the port is NOT capable of being used for
transmission/reception (this includes a port that is
ADMIN down as well as a port that is down due to an
operational fault).
Enumerations are as follows:
1 = Active Up
2 = Active Down
3 = Inactive Up
4 = Inactive Downro INTEGER .1.3.6.1.4.1.637.61.1.23.15.1.5 |
eqptPortProtectionSwitchCommandThis attribute represents the IfIndex of the desired port
to switch over to.
Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
1) IfIndex must represent a real port.
2) IfIndex must be part of a protection group.
3) IfIndex must be either the primary or the paired port
of the protection group on which the switchover is
triggered.rw InterfaceIndex .1.3.6.1.4.1.637.61.1.23.15.1.6 |
eqptPortProtectionLastSwitchReasonThis attribute contains the reason for the last port
switchover (if any).
0 = No switch has occurred (since last LT startup).
1 = Manual switch due to port Admin State change.
2 = Manual switch due to usage of Switch command.
3 = Automatic switch due to system determination.
4 = Automatic switch due to LT failure.ro INTEGER .1.3.6.1.4.1.637.61.1.23.15.1.7 |
eqptPortProtectionNumberOfSwitchoversThis attribute contains the number of switchovers since
last LT startup.ro INTEGER .1.3.6.1.4.1.637.61.1.23.15.1.8 |
eqptPortProtectionLookupTableThis table holds the lookup port protection groups SEQUENCE OF EqptPortProtectionLookupEntry .1.3.6.1.4.1.637.61.1.23.16 |
eqptPortProtectionLookupEntryThis entry represents a lookup protection group which consists
of two ports. The key is either a primary or a paired port
in the eqptPortProtectionTable. EqptPortProtectionLookupEntry .1.3.6.1.4.1.637.61.1.23.16.1 |
eqptPortProtectionLookupPortIdEach row is indexed by the IfIndex of a port in a
protection group, either a primary or a paired port.
Only PON ports can be selected.ro InterfaceIndex .1.3.6.1.4.1.637.61.1.23.16.1.1 |
eqptPortProtectionLookupPrimaryPortIdThis attribute represents the IfIndex of the primary
port of the protection group to which the key port
belongs.
Only PON ports can be selected.ro InterfaceIndex .1.3.6.1.4.1.637.61.1.23.16.1.2 |
eqptBoardPlannedResourceTableA table representing the actual values of configured hardware
resources on boards.
This table only displays entries for resources on the boards
that support this view. These are boards for which the relation
between HW resource consumption and system configuration is not
trivial.
If the board is not supporting this view, then no entries will
be displayed. The board does not physically need to be present
for displaying the resources.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptBoardPlannedResourceEntry .1.3.6.1.4.1.637.61.1.23.17 |
eqptBoardPlannedResourceEntryAn entry of the equipment planned resource table
ALCATEL NOTE:
SUPPORT: YES EqptBoardPlannedResourceEntry .1.3.6.1.4.1.637.61.1.23.17.1 |
eqptBoardPlannedResourceIdIndex of the planned resource for a board
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: - INTEGER .1.3.6.1.4.1.637.61.1.23.17.1.1 |
eqptBoardPlannedResourceCurrentValueThe actual planned value for the resource
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.17.1.2 |
eqptBoardPlannedResourceMaxValueThe maximum value that the board supports for this resource.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.17.1.3 |
eqptBoardPlannedResourceDescriptionA string describing the planned resource for this board.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.17.1.4 |
eqptPowerTableEquipment power table, representing the power management objects per
system, rack or shelf.
This table contains one row for the system, rack or shelf that is
subject to power management. In other cases no entry is instantiated.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptPowerEntry .1.3.6.1.4.1.637.61.1.23.18 |
eqptPowerEntryAn entry of the equipment power table.
An entry will be instantiated for a system/rack or shelf with active
power management functionality.
At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned
RANI-B/RPNI-B comply to this requirement.
ALCATEL NOTE:
SUPPORT: YES EqptPowerEntry .1.3.6.1.4.1.637.61.1.23.18.1 |
eqptPowerIdIndex in equipment Power Table.
Index gives the shelf identification.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - EqptHolderIndex .1.3.6.1.4.1.637.61.1.23.18.1.1 |
eqptPowerAdminModeThe eqptPowerAdminMode shows the configured power mode.
This configured mode will be used to mask any failures detected
for non-supported modes.
Enumeration is as follows:
0 = no powermanagement mode configured
1 = AC -> failures on DC local and DC network suppressed
2 = AC + DC local -> failures on DC network suppressed
3 = DC network -> failures on AC or DC local suppressed
4 = DC network + DC local -> failures on AC suppressed
5 = DC local -> failures on DC network or AC suppressed
Configuration of the eqptPowerAdminMode is not mandatory and will
not impact the behavior of the power module.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.2 |
eqptPowerOperModeThe eqptPowerOperMode shows the power mode the NE is using at the
moment of reading.
The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO
(e.g. RANI-B or RPNI-B) will provide valid information for this
object.
Other systems without Power mode support get no-powermgnt (0).
Enumeration is as follows:
0 = system without an active power management
1 = AC
2 = AC + DC local
3 = DC network
4 = DC network + DC local
5 = DC local
6 = Battery fallback, i.e. only battery provides power to the system.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.3 |
eqptPowerBatTypeThis object is used to configure the battery type.
This configuration only possible for planned powermanagement devices,
in this case a planned RANI-B or RPNI-B. Only values for supported
battery types are possible (e.g. in R51 only AGM/VRLA Lead Calcium
BATTERY (1) is supported for the RANI-B/RPNI-B)
The configured value is used to configure the power management driver.
The link between the configurable value and the battery type is:
0 = no battery configured
1 = AGM/VRLA Lead Calcium BATTERY
2 = AGM/VRLA Pure Lead BATTERY
3 = FLOODED BATTERY
4 = GEL BATTERY
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.4 |
eqptPowerBatStartCapacityThe capacity (Ah) of the battery at the moment of installation.
The value of the capacity is in 1/100 Ah.
Instatiated when eqptPowerBatType is configured.
The configuration of this object is mandatory together with the
configuration of the eqptPowerBatType
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1000 .. 10000
PERSIST: YES DEFVALUE: 1000 UNITS: 1/10O Ahrw INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.5 |
eqptPowerBatPlannedLifetimePlanned lifetime of the installed battery in 1/10 year.
The planned lifetime, together with the start capacity, is used to
calculate the actual maximal capacity of the battery.
Instatiated when eqptPowerBatType is configured.
The configuration of this object is mandatory together with the
configuration of the eqptPowerBatType
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 150
PERSIST: YES DEFVALUE: 0 UNITS: 1/10 Yearrw INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.6 |
eqptPowerBatStateThe battery state will provide a view on the state of the battery.
Possible states are: charging, charged and discharging.
This operational state has meaning for devices that have a configured
eqptPowerBatType. Other devices get a not-configured (0) value returned.
Enumeration is as follows:
1 = no data available, e.g. battery configured, but not connected
2 = charging
3 = charged
4 = discharging
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.7 |
eqptPowerBatFailureThe battery failure state will provide an view on the failure state of
the battery.
This failure state has meaning for devices that have a configured
eqptPowerBatType and eqptPowerBatState different from default or
no-data. Other devices get a not-applicable (0) value returned.
Specific ranges for the failure cases strongly depend on the battery type
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not applicable
1 = voltage good
2 = voltage out of range
3 = over-voltage
4 = over-temperature alarm on local temperature sensor
5 = battery depleted
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.8 |
eqptPowerBatTemperatureMeasured temperature of the battery in 1/10 Celcius
The value is only readable when the battery type (eqptPowerBatType)
is configured and the battery is installed and reachable.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: -1000 .. 1000
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Celciusro INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.9 |
eqptPowerBatActualCapacityThe capacity (in % of a fully charged battery) of the battery.
The value is only readable when the battery type (eqptPowerBatType)
is configured and the battery is installed and reachable.
Default value of 0% is returned when the battery is not reachable.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 - 100
PERSIST: NO DEFVALUE: 0 UNITS: %ro INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.10 |
eqptPowerBatDefenseModeThe battery defense modes offers the operator the possibility to
select the preferred power defense mode in case the system falls
back to the battery mode. The power defense mode is a way to
optimize the power consumption. In R5001 two options are possible.
In later releases additional defense modes will be introduced.
- no battery defense. In this mode the system will run normally,
offering regular service until the battery runs out and the
regular hw defenses are started (Dying Gasp)
- voice priority. In this mode when the system falls back to the
battery the regular service will be maintained until the battery
drains until 90% and will then give priority to the voice LT's by
powering down the DSL LT's. Voice service will be maintained until
the battery runs out and the regular hw defenses are started (Dying
Gasp).
This configuration only possible for planned powermanagement devices,
in this case a planned RANI-B or RPNI-B.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -rw Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.11 |
eqptPowerBatDefenseThresholdThe threshold gives an indication of the remaining capacity of the
battery at the moment the defense defined in eqptPowerBatDefenseMode
should be started. The value is in %. In the default case the configured
defense mode is immediately activated.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0-100
PERSIST: YES DEFVALUE: 80 UNITS: %rw INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.12 |
eqptPowerACStateThe AC power state will provide an view on the state of the AC Power
supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and AC input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.13 |
eqptPowerACFailureThe AC failure state will provide an view on the failure state of
the AC power supply.
This failure state has meaning when eqptPowerACstate different from
default. In other cases not-applicable (0) is returned.
Specific ranges for the failure cases strongly depend on the AC power
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not-applicable
1 = voltage good
2 = voltage out of range
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.14 |
eqptPowerNDCaStateThe NDCa (Network DC a) state will provide an view on the state of
the Network DC Power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and NDC a input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.15 |
eqptPowerNDCaFailureThe NDCa failure state will provide an view on the failure state of
the Network DC a power supply.
This failure state has meaning when eqptPowerNDCaState different from
default. In other cases not-applicable (0) is returned.
Specific ranges for the failure cases strongly depend on the DC power
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not-applicable
1 = voltage-good
2 = low-voltage
3 = under-voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.16 |
eqptPowerNDCbStateThe NDCb (Network DC a) state will provide an view on the state of
the Network DC b power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and NDC b input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.17 |
eqptPowerNDCbFailureThe NDCb failure state will provide an view on the failure state of
the Network DC b power supply.
This failure state has meaning when eqptPowerNDCbState different from
default. In other cases not-applicable (0) is returned.
Specific ranges for the failure cases strongly depend on the DC power
used. The ranges will be detailed in the customer documentation.
Enumeration is as follows:
0 = not-applicable
1 = voltage-good
2 = low-voltage
3 = under-voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.18 |
eqptPowerLDCaStateThe LDCa power state will provide an view on the state of the local
DC a power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and LDC a input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.19 |
eqptPowerLDCaFailureThe LDCa failure state will provide an view on the failure state of
the local DC a power supply.
This failure state has meaning when eqptPowerLDCaState different from
default. In other cases not-applicable (0) is returned.
Enumeration is as follows:
0 = not-applicable
1 = voltage good
2 = voltage out of range
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.20 |
eqptPowerLDCbStateThe LDCb power state will provide an view on the state of the local
DC b power suply.
The value is different from no-powermgnt (0) for devices with power
management functionality and LDC b input available.
Enumeration is as follows:
0 = no-powermgnt
1 = active
2 = active-failure, i.e. in failure, but still providing power
3 = failure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.21 |
eqptPowerLDCbFailureThe LDCb failure state will provide an view on the failure state of
the local DC b power supply.
This failure state has meaning when eqptPowerLDCbState different from
default. In other cases not-applicable (0) is returned.
Enumeration is as follows:
0 = not-applicable
1 = voltage good
2 = voltage out of range
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 0 UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.18.1.22 |
eqptPowerInVoltageMeasured incoming voltage in 1/10 Volt
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 2650
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Voltro INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.23 |
eqptPowerInCurrentMeasured incoming current in 1/10 Ampere
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 60
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Amperero INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.24 |
eqptPowerInConsumedPowerCalculated incoming consumed power in 1/10 Watt
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 6000
PERSIST: NO DEFVALUE: 0 UNITS: 1/10 Wattro INTEGER .1.3.6.1.4.1.637.61.1.23.18.1.25 |
eqptPowerSupplyTableEquipment power table, representing the power suplly management objects
This table contains one row per power supply supported on the system.
In other cases no entry is instantiated.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptPowerSupplyEntry .1.3.6.1.4.1.637.61.1.23.19 |
eqptPowerSupplyEntryAn entry of the equipment power table.
An entry will be instantiated per power supply supported on the system.
ALCATEL NOTE:
SUPPORT: YES EqptPowerSupplyEntry .1.3.6.1.4.1.637.61.1.23.19.1 |
eqptPowerSupplyIdIndex in equipment Power Supply Table.
This is a number representing the Nth power supply present in the system.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: - EqptPowerSupplyIndex .1.3.6.1.4.1.637.61.1.23.19.1.1 |
eqptPowerSupplyPartNumberReport the part number of the installed power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.19.1.2 |
eqptPowerSupplyCleiCodeReport the CLEI code of the installed power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.19.1.3 |
eqptPowerSupplySerNumberReport the serial number of the installed power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro OCTET STRING .1.3.6.1.4.1.637.61.1.23.19.1.4 |
eqptPowerSupplyVinReport the incoming voltage arriving at the power supply in millivolt
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.19.1.5 |
eqptPowerSupplyIinReport the incoming current arriving at the power supply in milliampere
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.19.1.6 |
eqptPowerSupplyVoutReport the output voltage provided by the power supply in millivolt
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.19.1.7 |
eqptPowerSupplyIoutReport the output current provided by the power supply in milliampere
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.19.1.8 |
eqptPowerSupplyTemperatureReport the temperature of the power supply in millidegree
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.19.1.9 |
eqptPowerSupplyFaultVinReport the fault or warning occurring for the input voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.10 |
eqptPowerSupplyFaultVoutReport the fault or warning occurring for the output voltage
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.11 |
eqptPowerSupplyFaultIinReport the fault or warning occurring for the input current
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.12 |
eqptPowerSupplyFaultIoutReport the fault or warning occurring for the output current
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.13 |
eqptPowerSupplyFaultTemperatureReport the fault or warning occurring for the tempertaure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.14 |
eqptPowerSupplyFaultCmlReport the fault or warning occurring for the tempertaure
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.15 |
eqptPowerSupplyPresentReport if the power supply is present.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.16 |
eqptPowerSupplyFaultDetectedReport if a fault has been detected. If yes, then
eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout,
eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut,
eqptPowerSupplyFaultTemperature or eqptPowerSupplyFaultCml
is reporting an error.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro Enumeration .1.3.6.1.4.1.637.61.1.23.19.1.17 |
eqptPowerSupplyRftc OBJECT IDENTIFIER .1.3.6.1.4.1.637.61.1.23.20 |
eqptPowerRftcTableEquipment RFT-C power table, representing the RFT-C management objects
This table contains one row per RFT-C module supported on the system.
In other cases no entry is instantiated.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptPowerRftcEntry .1.3.6.1.4.1.637.61.1.23.20.1 |
eqptPowerRftcEntryAn entry of the equipment RFT-C power table.
ALCATEL NOTE:
SUPPORT: YES EqptPowerRftcEntry .1.3.6.1.4.1.637.61.1.23.20.1.1 |
eqptPowerRftcIdIndex in equipment Power RFT-C Table.
This is a number represents the shelf containting the RFT-C module.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro EqptHolderIndex .1.3.6.1.4.1.637.61.1.23.20.1.1.1 |
eqptPowerRftcVCommonReport the common voltage arriving at the power supply in millivolt
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: mVro INTEGER .1.3.6.1.4.1.637.61.1.23.20.1.1.2 |
eqptPowerRftcICommonReport the common current arriving at the power supply in milliampere
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: mAro INTEGER .1.3.6.1.4.1.637.61.1.23.20.1.1.3 |
eqptPowerRftcTHotspotReport the temperature of the power supplys hotspot in degrees celcius
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: °Cro INTEGER .1.3.6.1.4.1.637.61.1.23.20.1.1.4 |
eqptPowerRftcTAmbientReport the ambient temperature of the power supply in degrees celcius
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: °Cro INTEGER .1.3.6.1.4.1.637.61.1.23.20.1.1.5 |
eqptPowerRftcSWVersionReport the software version of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.20.1.1.6 |
eqptPowerRftcHWVersionReport the hardware version of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.20.1.1.7 |
eqptPowerRftcHWRevisionReport hardware revision of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.20.1.1.8 |
eqptPowerRftcSerialnumberReport serial number of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.20.1.1.9 |
eqptPowerRftcManufacturerReport the manufacturer code of the RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.61.1.23.20.1.1.10 |
eqptPowerRftcLineCountReport the number of lines used on this RFT-C power supply
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.20.1.1.11 |
eqptPowerRftcLineTableALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above SEQUENCE OF EqptPowerRftcLineEntry .1.3.6.1.4.1.637.61.1.23.20.2 |
eqptPowerRftcLineEntryAn entry in the eqptPowerRftcLineTable.
ALCATEL NOTE:
SUPPORT: YES EqptPowerRftcLineEntry .1.3.6.1.4.1.637.61.1.23.20.2.1 |
eqptPowerRftcLineIdReport the line number
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro INTEGER .1.3.6.1.4.1.637.61.1.23.20.2.1.1 |
eqptPowerRftcLineStatusReport the line status.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -ro EqptPowerRftcLineStatus .1.3.6.1.4.1.637.61.1.23.20.2.1.2 |