ISHELF-SYS-MIB
The MIB module for managing the IShelf System.
Main OID:
iShelfSysMIB.1.3.6.1.4.1.9056.5.11.2
168
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
168 total| Object Name |
|---|
iShelfSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9056.5.1.1 |
iShelfSysMIBVersionThis object indicates the current MIB version.ro Unsigned32 .1.3.6.1.4.1.9056.5.1.1.1 |
iShelfSysLabelUser label for the System.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.2 |
iShelfSysFeatureEnableSetting this scalar causes the associated feature to be enabled on the system (assuming an appropriate key). A Get returns an unspecified value.rw IShelfFeatureKey (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.3 |
iShelfSysActionSetting this scalar will result in the associated action being performed on the system. A Get of the scalar will indicate the last performed action.rw Enumeration .1.3.6.1.4.1.9056.5.1.1.4 |
iShelfSysSystemDateTimeReading this attribute produces the current system date and time. Writing this attribute sets the current system date and time to the value written.rw IShelfDateTime (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.5 |
iShelfSysDatabaseSyncStatusThis attribute displays the current database synchronization status between the EMGMT card and the CPU card.ro IShelfDbSyncStatus (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.6 |
iShelfSysAlarmSettingsTableThe Alarm Settings table provides the ability for the operator to override the internal default settings for each alarm. For example, assuming the ONT Missing alarm is MINOR by default, with this table a row can be created for the ONT Missing alarm and the severity level can be changed to MAJOR. SEQUENCE OF IShelfSysAlarmSettingsEntry .1.3.6.1.4.1.9056.5.1.1.7 |
iShelfSysAlarmSettingsEntryEach entry corresponds to one Alarm. IShelfSysAlarmSettingsEntry .1.3.6.1.4.1.9056.5.1.1.7.1 |
iShelfSysAlarmSettingsIdThe type of alarm.ro IShelfAlarmId (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.7.1.1 |
iShelfSysAlarmSettingsNameUser name for the alarm. This object can only set for the usrX alarm ids. All other alarms have a predefined system name that cannot be changed. NOTE: This object can only be modified with a non-active rowStatus.rw IShelfAlarmName (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.7.1.2 |
iShelfSysAlarmSettingsLevelThe severity level of the alarm. critical(1), major(2), minor(3), warning(4), event(5), clear(6) NOTE: This object can only be modified with a non-active rowStatus.rw IShelfAlarmLevel (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.7.1.3 |
iShelfSysAlarmSettingsStateWhether the alarm is enabled or disabled. By default, all alarms are enabled. Disabling an alarm means there will be no user notification (no alarm) if the underlying condition is detected. NOTE: This object can only be modified with a non-active rowStatus.rw IShelfAlarmState (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.7.1.4 |
iShelfSysAlarmSettingsRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.1.7.1.5 |
iShelfSysCurrentAlarmTableThe Current Alarm Table. SEQUENCE OF IShelfSysCurrentAlarmEntry .1.3.6.1.4.1.9056.5.1.1.8 |
iShelfSysCurrentAlarmEntryEach entry corresponds to one active Alarm. IShelfSysCurrentAlarmEntry .1.3.6.1.4.1.9056.5.1.1.8.1 |
iShelfSysCurrentAlarmIndexThis is a rolling counter indicating the order of alarm detection.ro IShelfAlarmIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.1 |
iShelfSysCurrentAlarmIdThis object identifies the type of alarm that occurred.ro IShelfAlarmId (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.2 |
iShelfSysCurrentAlarmLocationTypeThis object identifies the type of location addressing.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.3 |
iShelfSysCurrentAlarmLocationThe physical address location of the alarm. This location will specify node, shelf, and slot.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.4 |
iShelfSysCurrentAlarmCircuitThe specific location of the alarm on the host card.ro IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.5 |
iShelfSysCurrentAlarmCardTypeThe card type of the alarm.ro IShelfCardType (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.6 |
iShelfSysCurrentAlarmOidThe OID of the alarm on the host card.ro IShelfSysTrapOid (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.7 |
iShelfSysCurrentAlarmLevelThe level of the alarm.ro IShelfAlarmLevel (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.8 |
iShelfSysCurrentAlarmConditionThe condition/cause of the alarm.ro IShelfAlarmCondition (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.9 |
iShelfSysCurrentAlarmServiceAffectingTrue if the alarm is service affecting.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.10 |
iShelfSysCurrentAlarmDateAndTimeDate and time the alarm occurred.ro IShelfDateTime (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.11 |
iShelfSysCurrentAlarmDescriptionAdditional description of the alarm.ro IShelfAlarmDescription (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.8.1.12 |
iShelfSysMgmtIfTable SEQUENCE OF IShelfSysMgmtIfEntry .1.3.6.1.4.1.9056.5.1.1.9 |
iShelfSysMgmtIfEntry IShelfSysMgmtIfEntry .1.3.6.1.4.1.9056.5.1.1.9.1 |
iShelfSysMgmtIfIndexro Enumeration .1.3.6.1.4.1.9056.5.1.1.9.1.1 |
iShelfSysMgmtIfLabelrw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.9.1.2 |
iShelfSysMgmtIfAdminStateThis object is used for locking a given management interface. In the case of a craft or snmp-mgmt interface, locking the interface results in the interface becoming read-only. Modifications are not allowed from a locked interface but Get operations will be allowed. In the case of an snmp-trap type interface locking results in no traps being sent to the interface.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.9.1.3 |
iShelfSysMgmtIfOperStateThis object indicates the current status of the interface.ro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.9.1.4 |
iShelfSysMgmtIfAllowAddressThis object indicates the client that is allowed to use the interface. It is not applicable (0.0.0.0) for craft type interfaces. For snmp-mgmt interfaces: - 0.0.0.0/AdminState=unlocked: Allow SNMP EMS connect from any client. - 0.0.0.0/AdminState=locked: Disallow connections on this interface. - x.x.x.x: Allow SNMP EMS connections from clients using the indicated address with the AllowMask object. The address may be a subnet rather than a specific host. For snmp-trap interfaces: - 0.0.0.0 - Interface is unused. - x.x.x.x - Send traps to specified host. This must be a host address.rw IpAddress .1.3.6.1.4.1.9056.5.1.1.9.1.5 |
iShelfSysMgmtIfAllowMaskThis object indicates the range of allowed addresses. For example for a single host the AllowMask would be 255.255.255.255. This object is not applicable for craft type interfaces. This object is assumed to be 255.255.255.255 for snmp-trap type interfaces.rw IpAddress .1.3.6.1.4.1.9056.5.1.1.9.1.6 |
iShelfSysMgmtIfActualAddressThis object indicates the actual client connection for the interface when the interface is operational.ro IpAddress .1.3.6.1.4.1.9056.5.1.1.9.1.7 |
iShelfSysMgmtIfRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.1.9.1.8 |
iShelfSysLastErrorTable SEQUENCE OF IShelfSysLastErrorEntry .1.3.6.1.4.1.9056.5.1.1.10 |
iShelfSysLastErrorEntry IShelfSysLastErrorEntry .1.3.6.1.4.1.9056.5.1.1.10.1 |
iShelfSysLastErrorIndexThe interface that this error occurred on. snmpMgmt1 (1) snmpMgmt2 (2)ro Enumeration .1.3.6.1.4.1.9056.5.1.1.10.1.1 |
iShelfSysLastErrorCodeThe error code of the last error that occurred.ro IShelfSysLastErrorCode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.10.1.2 |
iShelfSysLastErrorDataThe data associated with the last error that occurred.ro Integer32 .1.3.6.1.4.1.9056.5.1.1.10.1.3 |
iShelfSysLastErrorDescriptionThe error string describing the last error that occurred. The string can be a maximum of 64 characters.ro DisplayString .1.3.6.1.4.1.9056.5.1.1.10.1.4 |
iShelfSysFileTransferTableThis table provides the ability to download a file to the system or upload a file from the system. It provides a generic way of initiating either a software download (software upgrade) or a database backup/restore (database upload/download). Only a single entry can be created in this table. SEQUENCE OF IShelfSysFileTransferEntry .1.3.6.1.4.1.9056.5.1.1.11 |
iShelfSysFileTransferEntryOne row is for software download and one row is for database backup/restore. IShelfSysFileTransferEntry .1.3.6.1.4.1.9056.5.1.1.11.1 |
iShelfSysFileTransferIndexThe first entry defines software download attributes and the second entry defines database backup and restore attributes.ro Enumeration .1.3.6.1.4.1.9056.5.1.1.11.1.1 |
iShelfSysFileTransferServerIpAddressThe TFTP or FTP server that will handle the file transfer.rw IpAddress .1.3.6.1.4.1.9056.5.1.1.11.1.2 |
iShelfSysFileTransferPortThe TCP/UDP port to use for the file transfer.rw INTEGER .1.3.6.1.4.1.9056.5.1.1.11.1.3 |
iShelfSysFileTransferFilenameThe file that will be downloaded or uploaded.rw IShelfDownloadFilename (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.11.1.4 |
iShelfSysFileTransferCardLocationThe physical address location of the card to download. This location will specify node, shelf, and slot. The active CPU is slot 26. The standby CPU is slot 27. If locations is set to 0 it specifies broadcast to all locations.rw IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.11.1.5 |
iShelfSysFileTransferActionThe actions that can be initiated on the system. Note that the softwareXX actions apply only to the softwareDownload entry and the databaseXX actions apply only to the databaseBackupResotre entry.rw Enumeration .1.3.6.1.4.1.9056.5.1.1.11.1.6 |
iShelfSysFileTransferProgressIndicates the progress of the transfer in terms of percent complete.ro INTEGER .1.3.6.1.4.1.9056.5.1.1.11.1.7 |
iShelfSysFileTransferOperStateIndicates the operation status of the transfer.ro Enumeration .1.3.6.1.4.1.9056.5.1.1.11.1.8 |
iShelfSysFileTransferOperStateDescriptionProvides variable meaning to the different operational states.ro IShelfGenericString (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.11.1.9 |
iShelfSysFileTransferRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.1.11.1.10 |
iShelfSysDBChangeLogTableThis table is a history of DB change actions: edits and deletes. There is a maximum of 256 entries. SEQUENCE OF IShelfSysDBChangeLogEntry .1.3.6.1.4.1.9056.5.1.1.12 |
iShelfSysDBChangeLogEntry IShelfSysDBChangeLogEntry .1.3.6.1.4.1.9056.5.1.1.12.1 |
iShelfSysDBChangeLogIndexSimple sequential index for the log entry. 1 - 4294967295. The index is incremented by 1 for each new entry. When max index is reached it rolls over to 1.ro Unsigned32 .1.3.6.1.4.1.9056.5.1.1.12.1.1 |
iShelfSysDBChangeLogOidThe OID of the DB change.ro IShelfSysTrapOid (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.12.1.2 |
iShelfSysDBChangeLogIsDeletionIf true the indicated OID was deleted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.1.12.1.3 |
iShelfSysDBChangeLogLastIndexIdentifies the sequence number that was used for the latest entry into the DB Change Log table. The EMS may periodically poll this entry to get the latest sequence number to determine if it is in sync with the MGMT card database. The number is incremented for each entry, up to 4294967295, and wraps back to one.ro Unsigned32 .1.3.6.1.4.1.9056.5.1.1.13 |
iShelfSysDBChangeDataBaseHash128 bit MD5 Hash value. The value is obtained from the CPU. Used by EMS to determine database out of sync condition.ro OCTET STRING .1.3.6.1.4.1.9056.5.1.1.14 |
iShelfSysFmmErrorResponseTable SEQUENCE OF IShelfSysFmmErrorResponseEntry .1.3.6.1.4.1.9056.5.1.1.15 |
iShelfSysFmmErrorResponseEntry IShelfSysFmmErrorResponseEntry .1.3.6.1.4.1.9056.5.1.1.15.1 |
iShelfSysFmmErrorResponseSnmpRequestIdThe SNMP PDU Request ID associated with this error response.ro INTEGER .1.3.6.1.4.1.9056.5.1.1.15.1.1 |
iShelfSysFmmErrorResponseConsoleCodeThe console error code associated with this error response.ro IShelfSysConsoleErrorCode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.1.15.1.2 |
iShelfSysFmmErrorResponseOutputStringThe console output error string associated with this error response. The string can be a maximum of 80 characters.ro DisplayString .1.3.6.1.4.1.9056.5.1.1.15.1.3 |
iShelfSysNode OBJECT IDENTIFIER .1.3.6.1.4.1.9056.5.1.2 |
iShelfNodeConfigTableNode specific configuration SEQUENCE OF IShelfNodeConfigEntry .1.3.6.1.4.1.9056.5.1.2.1 |
iShelfNodeConfigEntryEach row is a node IShelfNodeConfigEntry .1.3.6.1.4.1.9056.5.1.2.1.1 |
iShelfNodeConfigLocationThe physical address location of the node. This location will only specify node.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.1.1.1 |
iShelfNodeConfigLabelThe user label for the node.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.1.1.2 |
iShelfNodeConfigRdtBatteriesInstalledThis indicates if battery power is provided for the shelf. Only applicable if the node is an RDT. true (1), false (2) This attribute can only be modified when the node is in the enabled state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.2.1.1.3 |
iShelfNodeConfigRdtAcPoweredThis indicates if AC power is provided for the shelf. Only applicable if the node is an RDT. true (1), false (2) This attribute can only be modified when the node is in the enabled state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.2.1.1.4 |
iShelfNodeConfigCdtAlarmIOThis indicates if the Alarm I/O is input or output. Only applicable if the node is a CDT. output (1), input (2) This attribute can only be modified when the node is in the enabled state.rw IShelfAlarmIO (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.1.1.5 |
iShelfNodeConfigActionSetting this object will result in the associated action being performed on the node. A Get of the object will indicate the last performed action. noAction (0), clearAlarmHistory (1), alarmCutOff (2), resetNode(3) This attribute can only be modified when the node is in the enabled state.rw Enumeration .1.3.6.1.4.1.9056.5.1.2.1.1.6 |
iShelfNodeConfigOperStateThis object indicates the current status of node. Several attributes can only be modified when the operState is enabled. See individual attributes for details.ro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.1.1.7 |
iShelfNodeConfigRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.2.1.1.8 |
iShelfNodeTimingSourceConfigTableConfigured timing source table. SEQUENCE OF IShelfNodeTimingSourceConfigEntry .1.3.6.1.4.1.9056.5.1.2.2 |
iShelfNodeTimingSourceConfigEntryContains timing info for node. IShelfNodeTimingSourceConfigEntry .1.3.6.1.4.1.9056.5.1.2.2.1 |
iShelfNodeTimingSourceConfigNodeThe node the timing source applies to.ro IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.2.1.1 |
iShelfNodeTimingSourceConfigTypeThis object identifies the type of timing source associated with the timing index. TODO add all the rules.rw Enumeration .1.3.6.1.4.1.9056.5.1.2.2.1.2 |
iShelfNodeTimingSourceConfigPrimaryLocationTypeThis indicates the location type. If the value is (1), the PrimaryLocation and PrimaryCircuit will be used. If the value is (2), then a wildcard will used instead. Note: Only RDTx can have a primary of type any.rw Enumeration .1.3.6.1.4.1.9056.5.1.2.2.1.3 |
iShelfNodeTimingSourceConfigPrimaryLocationThe physical address location of the primary timing source for the node. This location will specify node, shelf, and slot. Note: Only shelf 1 of a node can provide a timing source for the node.rw IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.2.1.4 |
iShelfNodeTimingSourceConfigPrimaryCircuitThis field indicates the circuit on the slot carrying the primary timing source. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.2.1.5 |
iShelfNodeTimingSourceConfigSecondaryLocationTypeThis indicates the location type. If the value is (1), the SecondaryLocation and SecondaryCircuit will be used. If the value is (2), then a wildcard will used instead.rw Enumeration .1.3.6.1.4.1.9056.5.1.2.2.1.6 |
iShelfNodeTimingSourceConfigSecondaryLocationThe physical address location of the Secondary timing source for the node. This location will specify node, shelf, and slot. Note: Only shelf 1 of a node can provide a timing source for the node.rw IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.2.1.7 |
iShelfNodeTimingSourceConfigSecondaryCircuitThis field indicates the circuit on the slot carrying the secondary timing source. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.2.1.8 |
iShelfNodeTimingSourceConfigRowStatusThis object is used for row modification. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.2.2.1.9 |
iShelfNodeActiveTimingSourceTableTiming source table. SEQUENCE OF IShelfNodeActiveTimingSourceEntry .1.3.6.1.4.1.9056.5.1.2.3 |
iShelfNodeActiveTimingSourceEntryEach row indicates the current active timing source for the associated node. IShelfNodeActiveTimingSourceEntry .1.3.6.1.4.1.9056.5.1.2.3.1 |
iShelfNodeActiveTimingSourceNodeThe node the timing source applies to.ro IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.3.1.1 |
iShelfNodeActiveTimingSourceIndexThis object indicates which configured timing source has been selected if any. primary - the configured primary source is the active source. secondary - the configured secondary source is the active source. local - the active source is not the configured primary or secondary.ro Enumeration .1.3.6.1.4.1.9056.5.1.2.3.1.2 |
iShelfNodeActiveTimingSourceTypeThis object identifies the type of timing source providing timing.ro Enumeration .1.3.6.1.4.1.9056.5.1.2.3.1.3 |
iShelfNodeActiveTimingSourceLocationThe physical address location of the active timing source for the node. This location will specify node, shelf, and slot. Note: This location is only valid if the active timing source is recovered.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.3.1.4 |
iShelfNodeActiveTimingSourceCircuitThis indicates the circuit currently providing timing for recovered cases.ro IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.3.1.5 |
iShelfNodeSecSeuConnTableSEC/SEU Connection Table. These are Shelf Expansion connections that link multiple shelves within a single node. SEQUENCE OF IShelfNodeSecSeuConnEntry .1.3.6.1.4.1.9056.5.1.2.4 |
iShelfNodeSecSeuConnEntryEach row is a connection between shelves. Connections can be redundant between shelves. IShelfNodeSecSeuConnEntry .1.3.6.1.4.1.9056.5.1.2.4.1 |
iShelfNodeSecSeuConnSeuLocationThe physical address location of the SEU card. This location will specify node, shelf, and slot. The SEU card is a general purpose card in the primary shelf.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.4.1.1 |
iShelfNodeSecSeuConnSecLocationThe physical address location of the SEC card. This location will specify node, shelf, and slot. The SEC card replaces the CPU cards in the expansion shelf.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.4.1.2 |
iShelfNodeSecSeuConnStatusThe current status of the connectionro Enumeration .1.3.6.1.4.1.9056.5.1.2.4.1.3 |
iShelfNodeMapTableThe table of connections between nodes (topology map). The Node Map table supports the following inter-node connections: OC12/OC48 Sonet circuits at STS1, STS3c, STS12c and STS48c rates. When creating OC12 or OC48 circuits, the iShelfNodeMapStsCircuitType and iShelfNodeMapTdmBandwidth objects are required. The specific iShelfNodeMapUpstreamCircuit and iShelfNodeMapDownstreamCircuit must also be non-zero. The IShelfCircuit format for an OC circuit is SSCCUU = 0001xx where xx is the circuit number based on the iShelfNodeMapStsCircuitType setting. In addition, iShelfNodeMapUpstreamCircuit and iShelfNodeMapDownstreamCircuit must be equal. FO155 circuits. The FO155 card has only 1 FO155 circuit. Therefore, when creating an FO155 circuit, the iShelfNodeMapUpstreamCircuit and iShelfNodeMapDownstreamCircuit values are SSCCUU = 000101. Default values for the other objects are sufficient. T1 circuits. Only the single T1 card is supported and, as such, there is only 1 T1 circuit. Therefore, when creating a T1 circuit, the iShelfNodeMapUpstreamCircuit and iShelfNodeMapDownstreamCircuit values are SSCCUU = 000101. Default values for the other objects are sufficient. MDSL circuits. The MDSL card has only 1 MDSL circuit. Therefore, when creating an MDSL circuit, the iShelfNodeMapUpstreamCircuit and iShelfNodeMapDownstreamCircuit values are SSCCUU = 000101. Default values for the other objects are sufficient. SEQUENCE OF IShelfNodeMapEntry .1.3.6.1.4.1.9056.5.1.2.5 |
iShelfNodeMapEntryEach entry contains a link between nodes. IShelfNodeMapEntry .1.3.6.1.4.1.9056.5.1.2.5.1 |
iShelfNodeMapUpstreamLocationThe physical address location of the upstream side of the connection. This location will specify node, shelf, and slot.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.1 |
iShelfNodeMapUpstreamCircuitThe facility/circuit associated with the upstream side of the connection. Only applicable if cardType is oc12 or 0c48. For oc12 there is only 1 facility and the valid ranges of the circuit are based on the STS Circuit Type: STS1 - 1..12 STS3c - 1..4 STS12c - 1 For oc48 there is only 1 facility and the valid ranges of the circuit are based on the STS Circuit Type: STS1 - 1..48 STS3c - 1..16 STS12c - 1..4 STS48c - 1ro IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.2 |
iShelfNodeMapDownstreamLocationThe physical address location of the downstream side of the connection. This location will specify node, shelf, and slot.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.3 |
iShelfNodeMapDownstreamCircuitThe facility/circuit associated with the downstream side of the connection. Only applicable if cardType is oc12 or oc48. For oc12 there is only 1 facility and the valid ranges of the circuit are based on the STS Circuit Type: STS1 - 1..12 STS3c - 1..4 STS12c - 1 For oc48 there is only 1 facility and the valid ranges of the circuit are based on the STS Circuit Type: STS1 - 1..48 STS3c - 1..16 STS12c - 1..4 STS48c - 1ro IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.4 |
iShelfNodeMapCardTypeThe card type hosting the connection. Valid types are: mdsl, t1, fo155, oc12 and oc48.rw IShelfCardType (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.5 |
iShelfNodeMapRedundancyThe redundancy type of the connection. Only applicable for cardType of oc12 or oc48. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfRedundancy (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.6 |
iShelfNodeMapIsRingConfigTrue if the connection is part of a ring. Only applicable for cardType of fo155. NOTE: this object can only be modified with a non-active rowStatus.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.7 |
iShelfNodeMapFiberRingIdThe Fiber Ring ID of the connection. Only applicable for cardType of fo155. If cardType is fo155 the range is 1..16. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfFiberRingId (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.8 |
iShelfNodeMapFiberRingMasterNodeThe network node that is the master node for this ring.ro IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.9 |
iShelfNodeMapStsCircuitTypeThe STS circuit type of the connection. Only applicable if cardType is oc12 or oc48. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfStsCircuitType (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.10 |
iShelfNodeMapTdmBandwidthThe number of 96 DS0 TDM bundles used for the connection. Only applicable for OC12 and OC48 circuits. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfTdmBandwidth (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.11 |
iShelfNodeMapLinkStatusThis object indicates the current state of the link supporting the node map. The following values are supported: unknown - no communication to CPU normal - the link is operational fault - link has a problem (i.e., missing card, LOS etc.) dryUp - link has been placed out of service noComm - link status cannot be determinedro Enumeration .1.3.6.1.4.1.9056.5.1.2.5.1.12 |
iShelfNodeMapUsRedundancyStatusThis object indicates the current redundancy state of the link. This is only applicable for OC12 type links. The following status are possible: none - not applicable or not accessible stbyProt - upstream is standby card and protect card stbyWrk - upstream is standby card and working card actProt - upstream is active card and protect card actWrk - upstream is active card and working cardro Enumeration .1.3.6.1.4.1.9056.5.1.2.5.1.13 |
iShelfNodeMapDsRedundancyStatusThis object indicates the current redundancy state of the link. This is only applicable for OC12 type links. The following status are possible: none - not applicable or not accessible stbyProt - downstream is standby card and protect card stbyWrk - downstream is standby card and working card actProt - downstream is active card and protect card actWrk - downstream is active card and working cardro Enumeration .1.3.6.1.4.1.9056.5.1.2.5.1.14 |
iShelfNodeMapAdminStateThis object is used for locking a given node map. Locking a node map will attempt to remove all traffic between the two nodes to a different node map for these two nodes (dryup the node map). This would be necessary to minimize the service affects of deleting a node map.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.15 |
iShelfNodeMapCompressionDefines the amount of compression applied to voice traffic on the node map. This only applies to metallic facilities (MDSL and T1). Compression is not supported for data traffic or on fiber optic facilities (OC12, OC48 and FO155). none(0) comp64k(1) uncompressed comp32k(2) comp16k(3)rw IShelfNodeMapCompression (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.16 |
iShelfNodeMapRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.2.5.1.17 |
iShelfNodeRingSeqTableThis table keeps track of the nodes in a ring network configuration. Each entry (up to 16) represents a ring. A ring can consist of up to 16 nodes. SEQUENCE OF IShelfNodeRingSeqEntry .1.3.6.1.4.1.9056.5.1.2.6 |
iShelfNodeRingSeqEntryRepresents a ring configuration. The RingSeqID identifies each ring. Up to 16 nodes can be in the ring. The first node in a Ring Sequence entry is the head node of that ring. The order of nodes corresponds to the PHYSICAL ordering on the ring and indicates the direction of the Working Ring; that is, Protect card to Working card direction around the ring. The last node entered is assumed to connect back to the head node. IShelfNodeRingSeqEntry .1.3.6.1.4.1.9056.5.1.2.6.1 |
iShelfNodeRingSeqIDUnique identifier for the ring, 1..16.ro INTEGER .1.3.6.1.4.1.9056.5.1.2.6.1.1 |
iShelfNodeRingSeqRingTypeRedundancy type for this ring.rw IShelfRedundancy (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.2 |
iShelfNodeRingSeqCarrierTypeCarrier type for this ring. fo155(1), oc12(2), or oc48(3).rw Enumeration .1.3.6.1.4.1.9056.5.1.2.6.1.3 |
iShelfNodeRingSeqNode1Node 1 in the ring. This is the head-end node of the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.4 |
iShelfNodeRingSeqNode2Node 2 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.5 |
iShelfNodeRingSeqNode3Node 3 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.6 |
iShelfNodeRingSeqNode4Node 4 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.7 |
iShelfNodeRingSeqNode5Node 5 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.8 |
iShelfNodeRingSeqNode6Node 6 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.9 |
iShelfNodeRingSeqNode7Node 7 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.10 |
iShelfNodeRingSeqNode8Node 8 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.11 |
iShelfNodeRingSeqNode9Node 9 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.12 |
iShelfNodeRingSeqNode10Node 10 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.13 |
iShelfNodeRingSeqNode11Node 11 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.14 |
iShelfNodeRingSeqNode12Node 12 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.15 |
iShelfNodeRingSeqNode13Node 13 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.16 |
iShelfNodeRingSeqNode14Node 14 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.17 |
iShelfNodeRingSeqNode15Node 15 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.18 |
iShelfNodeRingSeqNode16Node 16 in the ring.rw IShelfNode (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.19 |
iShelfNodeRingSeqRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.2.6.1.20 |
iShelfSysShelf OBJECT IDENTIFIER .1.3.6.1.4.1.9056.5.1.3 |
iShelfShelfConfigTableShelf specific configuration SEQUENCE OF IShelfShelfConfigEntry .1.3.6.1.4.1.9056.5.1.3.1 |
iShelfShelfConfigEntryeach row is a shelf IShelfShelfConfigEntry .1.3.6.1.4.1.9056.5.1.3.1.1 |
iShelfShelfConfigLocationThe physical address location of the shelf. This location will specify node and shelf.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.3.1.1.1 |
iShelfShelfConfigLabelThe user label for the shelf.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.3.1.1.2 |
iShelfShelfConfigRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.1.3.1.1.3 |
iShelfShelfConfigCellBusClockRateThe System Cell Bus Clock Rate.rw IShelfShelfCellBusClockRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.1.3.1.1.4 |
iShelfSysColdStartTrapThis trap is generated when the IShelf system agent is initialized and is ready for action. NOTIFICATION-TYPE .1.3.6.1.4.1.9056.5.9.1.1 |
iShelfSysAlarmTrapThis trap will contain the information about an alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.9056.5.9.1.2 |
iShelfSysDbChangeTrapThis trap will indicate a row that has changed in some way other than deletion (creation, change in read-write attributes). This trap will be generated regardless of the source so in the case of an EMS listener it will receive traps based on modifications it has initiated as well as any modifications that may take place through the Craft Interface. NOTIFICATION-TYPE .1.3.6.1.4.1.9056.5.9.1.3 |
iShelfSysDbDeleteTrapThis trap will indicate a row that has changed in one way, deletion. This trap will be generated regardless of the source so in the case of an EMS listener it will receive traps based on modifications it has initiated as well as any modifications that may take place through the Craft Interface. NOTIFICATION-TYPE .1.3.6.1.4.1.9056.5.9.1.5 |
iShelfTrapThrottleTableobsolete SEQUENCE OF IShelfTrapThrottleEntry .1.3.6.1.4.1.9056.5.9.2.1 |
iShelfTrapThrottleEntryobsolete IShelfTrapThrottleEntry .1.3.6.1.4.1.9056.5.9.2.1.1 |
iShelfTrapThrottleIndexroobsolete Enumeration .1.3.6.1.4.1.9056.5.9.2.1.1.1 |
iShelfTrapThrottleStatus.rwobsolete Enumeration .1.3.6.1.4.1.9056.5.9.2.1.1.2 |
iShelfSysTrapAlarmOidObject identifier that the alarm is associated with.ro IShelfSysTrapOid (ISHELF-TC) .1.3.6.1.4.1.9056.5.9.2.2 |
iShelfSysTrapAlarmLevelLevel or severity of the alarm.ro IShelfAlarmLevel (ISHELF-TC) .1.3.6.1.4.1.9056.5.9.2.3 |
iShelfSysTrapAlarmTimeDate and time the alarm was reported.ro IShelfDateTime (ISHELF-TC) .1.3.6.1.4.1.9056.5.9.2.4 |
iShelfSysTrapAlarmIdThis object identifies the type of alarm that occurred.ro IShelfAlarmId (ISHELF-TC) .1.3.6.1.4.1.9056.5.9.2.5 |
iShelfSysTrapDbChgOidObject identifier that the change is associated with.ro IShelfSysTrapOid (ISHELF-TC) .1.3.6.1.4.1.9056.5.9.2.6 |
iShelfSysTrapAlarmIndexIndex associated with alarm.ro IShelfAlarmIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.9.2.7 |
iShelfSysTrapAlarmConditionCondition associated with alarm.ro IShelfAlarmConditionString (ISHELF-TC) .1.3.6.1.4.1.9056.5.9.2.8 |
iShelfSysTrapDBChangeIndexIndex into the DB Change Log.ro Unsigned32 .1.3.6.1.4.1.9056.5.9.2.9 |
iShelfSysTrapLocationTypeLocation Type used for Location fields that can have multiple types.ro Unsigned32 .1.3.6.1.4.1.9056.5.9.2.10 |
iShelfSysMIBThe MIB module for managing the IShelf System. MODULE-IDENTITY .1.3.6.1.4.1.9056.5.11.2 |