ISHELF-DATA-MIB
AI MIB Summary
The ISHELF-DATA-MIB facilitates the monitoring and provisioning of Data Services on ISHELF hardware platforms, specifically tracking data service state variables, configuration parameters, and operational counters required for service activation and management.
The MIB module for managing the Data Services provisioning.
Main OID:
iShelfDataMIB.1.3.6.1.4.1.9056.5.11.7
301
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
301 total| Object Name |
|---|
iShelfDataGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9056.5.6.1 |
iShelfDhcpProfileTable SEQUENCE OF IShelfDhcpProfileEntry .1.3.6.1.4.1.9056.5.6.1.1 |
iShelfDhcpProfileEntry IShelfDhcpProfileEntry .1.3.6.1.4.1.9056.5.6.1.1.1 |
iShelfDhcpProfileIndexro IShelfDhcpProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.1.1.1 |
iShelfDhcpProfileLabelNOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.1.1.2 |
iShelfDhcpProfileModeThis object identifies the type of server configuration. The following handling is provided based on the mode: redundant: DHCP requests are transmitted to all configured servers. The first response from any of the servers will be acted on and the remaining responses will be ignored. loadBalance: DHCP requests are transmitted to one of the configured servers in a round-robin fashion. NOTE: this object can only be modified with a non-active rowStatus.rw Enumeration .1.3.6.1.4.1.9056.5.6.1.1.1.3 |
iShelfDhcpProfileServer1Primary DHCP server address. This address must be specified (non-zero) when the profile is created. NOTE: this object can only be modified with a non-active rowStatus.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.1.1.4 |
iShelfDhcpProfileServer2Secondary DHCP server address NOTE: this object can only be modified with a non-active rowStatus.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.1.1.5 |
iShelfDhcpProfileServer3Third DHCP server address NOTE: this object can only be modified with a non-active rowStatus.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.1.1.6 |
iShelfDhcpProfileServer4Fourth DHCP server address NOTE: this object can only be modified with a non-active rowStatus.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.1.1.7 |
iShelfDhcpProfileRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.1.1.8 |
iShelfDhcpProxyTableThe DHCP proxy table defines the proxy (GiAddr) addresses to be used to communicate from a given Layer3 termination point (Location) via an uplink (SPP) to a set of servers found in a DHCP profile. SEQUENCE OF IShelfDhcpProxyEntry .1.3.6.1.4.1.9056.5.6.1.2 |
iShelfDhcpProxyEntryEach row identifies the proxy (GiAddr) addresses for the Layer3 termination points for a given uplink (SPP) and DHCP profile pair IShelfDhcpProxyEntry .1.3.6.1.4.1.9056.5.6.1.2.1 |
iShelfDhcpProxyProfileIndexThis object identifies the DHCP profile associated with the set of GiAddrsro IShelfDhcpProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.2.1.1 |
iShelfDhcpProxyLocationThis object identifies the Node/Shelf/Slot location of the Layer3 termination identified by the GiAddrs.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.2.1.2 |
iShelfDhcpProxyGiAddr1This object identifies the proxy address to be used to route to server1 of the DHCP profile via the SPP1. This address must be specified (non-zero) when creating the proxy.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.2.1.3 |
iShelfDhcpProxySpp1This object identifies the SPP uplink to use with GiAddr1 to reach DHCP server 1. This SPP must be specified when creating the proxy.rw IShelfSppPointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.2.1.4 |
iShelfDhcpProxyGiAddr2This object identifies the proxy address to be used to route to server2 of the DHCP profile via the SPP.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.2.1.5 |
iShelfDhcpProxySpp2This object identifies the SPP uplink to use with GiAddr2 to reach DHCP server 2.rw IShelfSppPointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.2.1.6 |
iShelfDhcpProxyGiAddr3This object identifies the proxy address to be used to route to server3 of the DHCP profile via the SPP.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.2.1.7 |
iShelfDhcpProxySpp3This object identifies the SPP uplink to use with GiAddr3 to reach DHCP server 3.rw IShelfSppPointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.2.1.8 |
iShelfDhcpProxyGiAddr4This object identifies the proxy address to be used to route to server4 of the DHCP profile via the SPP.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.2.1.9 |
iShelfDhcpProxySpp4This object identifies the SPP uplink to use with GiAddr4 to reach DHCP server 4.rw IShelfSppPointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.2.1.10 |
iShelfDhcpProxyVlanIdThe VLAN ID of the ONT where this DHCP Lease Port address resides.rw INTEGER .1.3.6.1.4.1.9056.5.6.1.2.1.11 |
iShelfDhcpProxyRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.2.1.12 |
iShelfVciRelayProfileTable SEQUENCE OF IShelfVciRelayProfileEntry .1.3.6.1.4.1.9056.5.6.1.3 |
iShelfVciRelayProfileEntry IShelfVciRelayProfileEntry .1.3.6.1.4.1.9056.5.6.1.3.1 |
iShelfVciRelayProfileIndexro IShelfVciRelayProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.1 |
iShelfVciRelayProfileLabelNOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.2 |
iShelfVciRelayProfileVciString1This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.3 |
iShelfVciRelayProfileDhcpPointer1This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.4 |
iShelfVciRelayProfileVciString2This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.5 |
iShelfVciRelayProfileDhcpPointer2This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.6 |
iShelfVciRelayProfileVciString3This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.7 |
iShelfVciRelayProfileDhcpPointer3This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.8 |
iShelfVciRelayProfileVciString4This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.9 |
iShelfVciRelayProfileDhcpPointer4This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.10 |
iShelfVciRelayProfileVciString5This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.11 |
iShelfVciRelayProfileDhcpPointer5This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.12 |
iShelfVciRelayProfileVciString6This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.13 |
iShelfVciRelayProfileDhcpPointer6This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.14 |
iShelfVciRelayProfileVciString7This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.15 |
iShelfVciRelayProfileDhcpPointer7This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.16 |
iShelfVciRelayProfileVciString8This object defines the Vendor Class Identifier (Option 60) String NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.17 |
iShelfVciRelayProfileDhcpPointer8This object defines the DHCP Profile associated with the specific Vendor Class Identifier (Option 60) String. This value must be non-zero if the associated VCI String is present. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.18 |
iShelfVciRelayProfileRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.3.1.19 |
iShelfSLATable SEQUENCE OF IShelfSLAEntry .1.3.6.1.4.1.9056.5.6.1.4 |
iShelfSLAEntry IShelfSLAEntry .1.3.6.1.4.1.9056.5.6.1.4.1 |
iShelfSLAIndexIndex for this entry.ro IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.4.1.1 |
iShelfSLATypebestEffort(0) or committed(1).rw IShelfSLAType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.4.1.2 |
iShelfSLACirCommitted Information Rate in Mbps.rw IShelfSLACir (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.4.1.3 |
iShelfSLACbsCommitted Burst Size in Kbytes.rw IShelfSLACbs (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.4.1.4 |
iShelfSLAEirExcess Information Rate in Mbps.rw IShelfSLAEir (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.4.1.5 |
iShelfSLAEbsExcess Burst Size in Kbytes.rw IShelfSLAEbs (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.4.1.6 |
iShelfSLARowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.4.1.7 |
iShelfVlanConfigProfileTableVLAN Configuration Profile Table. SEQUENCE OF IShelfVlanConfigProfileEntry .1.3.6.1.4.1.9056.5.6.1.5 |
iShelfVlanConfigProfileEntry IShelfVlanConfigProfileEntry .1.3.6.1.4.1.9056.5.6.1.5.1 |
iShelfVlanConfigProfileIndexSimple index managed by user.ro IShelfVlanProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.1 |
iShelfVlanConfigProfileVlanTag802.1q VLAN ID. 0-4095. 0 indicated not used.rw IShelfVlanTag (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.2 |
iShelfVlanConfigProfileLabelName assigned to this profile.rw IShelfBroadbandLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.3 |
iShelfVlanConfigProfileGatewayIpIP address of the gateway router on the network.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.5.1.4 |
iShelfVlanConfigProfileSubnetMaskSubnet mask for the gateway IP address.rw IpAddress .1.3.6.1.4.1.9056.5.6.1.5.1.5 |
iShelfVlanConfigProfileContentTypeContent Type: Data(0), Video(1), EVC(2) or OLT(3).rw IShelfVcpContentType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.6 |
iShelfVlanConfigProfileEvcTypeEthernet Virtual Circuit type: std(0), bundled(1). std is basic EVC. bundled implies tunneling of one or more VLANs inside one EVC.rw IShelfEvcType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.7 |
iShelfVlanConfigProfileEvcStdFrameDelayIdentifies allowable frame delay from UNI to UNI across the EVC in ms.rw INTEGER .1.3.6.1.4.1.9056.5.6.1.5.1.8 |
iShelfVlanConfigProfileEvcStdJitterIdentifies allowable variation in transfer delay from UNI to UNI across the EVC in ms.rw INTEGER .1.3.6.1.4.1.9056.5.6.1.5.1.9 |
iShelfVlanConfigProfileEvcStdFrameLossIdentifies allowable frame loss rate for UNI to UNI packets across the EVC.rw IShelfBer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.10 |
iShelfVlanConfigProfileEvcStdTopologyIdentified internal topology. mesh(0) or tree(1). Specifies how the UNIs are interconnected in this EVC.rw Enumeration .1.3.6.1.4.1.9056.5.6.1.5.1.11 |
iShelfVlanConfigProfileEvcStdServiceTypeIdentifies EVC service type. multipoint-to-multipoint(0), or point-to-point(1).rw Enumeration .1.3.6.1.4.1.9056.5.6.1.5.1.12 |
iShelfVlanConfigProfileEvcStdUcastFrameDeliverySpecifies if unicast frames should be transported. true means delivered unconditionally, false means discarded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.13 |
iShelfVlanConfigProfileEvcStdBcastFrameDeliverySpecifies if broadcast frames should be transported. true means delivered unconditionally, false means discarded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.14 |
iShelfVlanConfigProfileEvcStdMcastFrameDeliverySpecifies if multicast frames should be transported. true means delivered unconditionally, false means discarded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.15 |
iShelfVlanConfigProfileEvcStdL2CPMacCtrltrue enables layer 2 control protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.16 |
iShelfVlanConfigProfileEvcStdL2CPLacptrue enables link aggregation control protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.17 |
iShelfVlanConfigProfileEvcStdL2CPPortAuthtrue enables port authorization.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.18 |
iShelfVlanConfigProfileEvcStdL2CPGarptrue enables ??rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.19 |
iShelfVlanConfigProfileEvcStdL2CPStptrue enables spanning tree protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.20 |
iShelfVlanConfigProfileEvcStdL2CPMulticasttrue enables multicast.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.21 |
iShelfVlanConfigProfileEvcBundledIntVcpIdReferences another std EVC VLAN Configuration profile. Used to provide tunneling for the referenced VCP.rw IShelfVlanPortProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.22 |
iShelfVlanConfigProfileEvcBundledCosPresClass of Service Preservation. true means that the CoS of the tunneled frames will be copied to the outer header.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.23 |
iShelfVlanConfigProfileVideoQuerierIpIP address of the network node responsible for IGMP Query messages. 0.0.0.0 is valid. Use 255.25.255.255 to disablerw IpAddress .1.3.6.1.4.1.9056.5.6.1.5.1.24 |
iShelfVlanConfigProfileOltTrafficShaperProfrw IShelfOltTrafficShaperPointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.25 |
iShelfVlanConfigProfileOltPortSwitchingIdentifies OLT local port switching. none(0), 8021Q(1).rw Enumeration .1.3.6.1.4.1.9056.5.6.1.5.1.26 |
iShelfVlanConfigProfileRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.5.1.27 |
iShelfVlanPortProfileTable SEQUENCE OF IShelfVlanPortProfileEntry .1.3.6.1.4.1.9056.5.6.1.6 |
iShelfVlanPortProfileEntry IShelfVlanPortProfileEntry .1.3.6.1.4.1.9056.5.6.1.6.1 |
iShelfVlanPortProfileIndexA simple index for this entry. Managed by the user.ro IShelfVlanProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.1 |
iShelfVlanPortProfileIngressTaguntagged(0), tagged(1), both(2). Acceptance criteria for VLAN frames received by the VLAN port.rw IShelfVlanXgressTag (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.2 |
iShelfVlanPortProfileEgressTaguntagged(0), tagged(1). Acceptance criteria for VLAN frames transmitted by the VLAN port.rw IShelfVlanXgressTag (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.3 |
iShelfVlanPortProfileNumProfilesNumber of VLAN Config Profiles associated with this Port profile.rw INTEGER .1.3.6.1.4.1.9056.5.6.1.6.1.4 |
iShelfVlanPortProfileVcp1VLAN Config Profile index.rw IShelfVlanProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.5 |
iShelfVlanPortProfileSla1SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.6 |
iShelfVlanPortProfileVcp2VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.7 |
iShelfVlanPortProfileSla2SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.8 |
iShelfVlanPortProfileVcp3VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.9 |
iShelfVlanPortProfileSla3SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.10 |
iShelfVlanPortProfileVcp4VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.11 |
iShelfVlanPortProfileSla4SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.12 |
iShelfVlanPortProfileVcp5VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.13 |
iShelfVlanPortProfileSla5SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.14 |
iShelfVlanPortProfileVcp6VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.15 |
iShelfVlanPortProfileSla6SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.16 |
iShelfVlanPortProfileVcp7VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.17 |
iShelfVlanPortProfileSla7SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.18 |
iShelfVlanPortProfileVcp8VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.19 |
iShelfVlanPortProfileSla8SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.20 |
iShelfVlanPortProfileVcp9VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.21 |
iShelfVlanPortProfileSla9SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.22 |
iShelfVlanPortProfileVcp10VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.23 |
iShelfVlanPortProfileSla10SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.24 |
iShelfVlanPortProfileVcp11VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.25 |
iShelfVlanPortProfileSla11SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.26 |
iShelfVlanPortProfileVcp12VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.27 |
iShelfVlanPortProfileSla12SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.28 |
iShelfVlanPortProfileVcp13VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.29 |
iShelfVlanPortProfileSla13SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.30 |
iShelfVlanPortProfileVcp14VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.31 |
iShelfVlanPortProfileSla14SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.32 |
iShelfVlanPortProfileVcp15VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.33 |
iShelfVlanPortProfileSla15SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.34 |
iShelfVlanPortProfileVcp16VLAN Config Profile index.rw IShelfVlanListIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.35 |
iShelfVlanPortProfileSla16SLA Index. Only necessary and valid if the accociated VCP is an EVC type.rw IShelfSLAIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.36 |
iShelfVlanPortProfileFilterProfIdTDBrw IShelfFilterProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.37 |
iShelfVlanPortProfileRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.1.6.1.38 |
iShelfDataOlt OBJECT IDENTIFIER .1.3.6.1.4.1.9056.5.6.2 |
iShelfTlsCarrierIspVlanTagThis object indicates the Carrier VLAN tag value to be associated with ISP Layer-3 and PPPoE services in the system. A value of zero indicates that no VLAN tag is associated with ISP Layer-3/PPPoE traffic.rw INTEGER .1.3.6.1.4.1.9056.5.6.2.1 |
iShelfOltBandwidthProfileTableThe system supports a maximum of 64 bandwidth profile entries. SEQUENCE OF IShelfOltBandwidthProfileEntry .1.3.6.1.4.1.9056.5.6.2.2 |
iShelfOltBandwidthProfileEntry IShelfOltBandwidthProfileEntry .1.3.6.1.4.1.9056.5.6.2.2.1 |
iShelfOltBandwidthProfileIndexThis object identifies the index into this table. The management application is responsible for managing the indices of this table.ro IShelfOltBandwidthIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.2.1.1 |
iShelfOltBandwidthProfileLabelThis object identifies the user description of the bandwidth profile. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.2.1.2 |
iShelfOltBandwidthProfileUsRateThis object identifies the upstream bandwidth in Kbps. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfOltPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.2.1.3 |
iShelfOltBandwidthProfileDsMinimumRateThis object identifies the minimum downstream bandwidth. This value represents the guaranteed minimum downstream bandwidth. The value is in Kbps. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfOltPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.2.1.4 |
iShelfOltBandwidthProfileDsMaximumRateThis object identifies the maximum downstream bandwidth. This value represents the best effort maximum downstream bandwidth. The subscriber can use data bandwidth up to the limit of their maximum bandwidth. If the sum of maximum bandwidth on a PON (for all ONTs) exceeds the total AAL5 bandwidth, the maximum bandwidth is shared amongst over-subscribers. The value is in Kbps. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfOltPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.2.1.5 |
iShelfOltBandwidthProfileRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.2.2.1.6 |
iShelfOltTrafficShaperTable SEQUENCE OF IShelfOltTrafficShaperEntry .1.3.6.1.4.1.9056.5.6.2.3 |
iShelfOltTrafficShaperEntry IShelfOltTrafficShaperEntry .1.3.6.1.4.1.9056.5.6.2.3.1 |
iShelfOltTrafficShaperIndexro IShelfOltTrafficShaperIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.3.1.1 |
iShelfOltTrafficShaperLabelNOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.3.1.2 |
iShelfOltTrafficShaperMinimumRateThe provisioned subscribed rate of the traffic shaper. The minimum subscribed rate allowed is 768 kbps. The maximum rate allowed is 40 Mbps. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfOltPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.3.1.3 |
iShelfOltTrafficShaperMaximumRateThe provisioned oversubscribed rate of the traffic shaper. Any bandwidth above the minimum is considered best effort. The maximum total rate allowed is 40 Mbps. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfOltPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.3.1.4 |
iShelfOltTrafficShaperActualMinimumRateThe actual subscribed rate of the traffic shaper. This may differ from the provisioned rate due to rounding up to the nearest unit of PON rate granularity.ro IShelfOltPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.3.1.5 |
iShelfOltTrafficShaperActualMaximumRateThe actual oversubscribed rate of the traffic shaper. This may differ from the provisioned rate due to rounding up to the nearest unit of PON rate granularity.ro IShelfOltPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.3.1.6 |
iShelfOltTrafficShaperRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.2.3.1.7 |
iShelfOltQosProfileTable SEQUENCE OF IShelfOltQosProfileEntry .1.3.6.1.4.1.9056.5.6.2.4 |
iShelfOltQosProfileEntry IShelfOltQosProfileEntry .1.3.6.1.4.1.9056.5.6.2.4.1 |
iShelfOltQosProfileIndexThis object identifies the OLT QOS profile number.ro IShelfOltQosIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.4.1.1 |
iShelfOltQosProfileLabelNOTE: this object can only be modified with a non-active rowStatus.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.4.1.2 |
iShelfOltQosProfileAdminStateThis object is used to allow modification of the associated profile. Modification of the iShelfOltQosFilterTable is only allowed when the associated entry in the iShelfOltQosProfileTable is locked. Once the iShelfOltQosProfileTable row is unlocked the associated changes for the iShelfOltQosFilterTable will be applied. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.4.1.3 |
iShelfOltQosProfileRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.2.4.1.4 |
iShelfOltQosFilterTable SEQUENCE OF IShelfOltQosFilterEntry .1.3.6.1.4.1.9056.5.6.2.5 |
iShelfOltQosFilterEntry IShelfOltQosFilterEntry .1.3.6.1.4.1.9056.5.6.2.5.1 |
iShelfOltQosFilterProfilePointerThis object identifies the QOS profile to which the entry is associated.ro IShelfOltQosIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.5.1.1 |
iShelfOltQosFilterIndexThis object identifies the specific row in the QOS profile.ro IShelfOltQosFilterIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.5.1.2 |
iShelfOltQosFilterSourceIpAddressThis object identifies the Source Ip Address for filtering it is ignored if either this object is 0.0.0.0 or the SourceIpMask is 0.0.0.0. Additionally, the address must be a unicast address.rw IpAddress .1.3.6.1.4.1.9056.5.6.2.5.1.3 |
iShelfOltQosFilterSourceIpMaskThe indicates the Source IP Address mask for filtering. See SourceIpAddress for further details.rw IpAddress .1.3.6.1.4.1.9056.5.6.2.5.1.4 |
iShelfOltQosFilterDestinationIpAddressThis object identifies the Destination Ip Address for filtering it is ignored if either this object is 0.0.0.0 or the DestinationIpMask is 0.0.0.0. Additionally, the address must be a unicast address.rw IpAddress .1.3.6.1.4.1.9056.5.6.2.5.1.5 |
iShelfOltQosFilterDestinationIpMaskThe indicates the Destination IP Address mask for filtering. See DestinationIpAddress for further details.rw IpAddress .1.3.6.1.4.1.9056.5.6.2.5.1.6 |
iShelfOltQosFilterSourcePortThis object indicates the source UDP/TCP port for filtering. The object is ignored if 0.rw INTEGER .1.3.6.1.4.1.9056.5.6.2.5.1.7 |
iShelfOltQosFilterDestinationPortThis object indicates the destination UDP/TCP port for filtering. The object is ignored if 0.rw INTEGER .1.3.6.1.4.1.9056.5.6.2.5.1.8 |
iShelfOltQosFilterProtocolThis object indicates the destination IP protocol for filtering. The object is ignored if 0.rw INTEGER .1.3.6.1.4.1.9056.5.6.2.5.1.9 |
iShelfOltQosFilterPriorityThis object indicates the priority associated with the filter.rw IShelfOltQosPriority (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.5.1.10 |
iShelfOltQosFilterStatusThis object identifies the handling of a given filter.rw IShelfOltQosStatus (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.2.5.1.11 |
iShelfOltQosFilterRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.2.5.1.12 |
iShelfDataOnt OBJECT IDENTIFIER .1.3.6.1.4.1.9056.5.6.3 |
iShelfOntEthernetVlanServiceTable SEQUENCE OF IShelfOntEthernetVlanServiceEntry .1.3.6.1.4.1.9056.5.6.3.1 |
iShelfOntEthernetVlanServiceEntry IShelfOntEthernetVlanServiceEntry .1.3.6.1.4.1.9056.5.6.3.1.1 |
iShelfOntEthernetVlanServiceLogicalIdro IShelfOntLogicalId (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.1.1.1 |
iShelfOntEthernetVlanServiceSLCIndexro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.1.1.2 |
iShelfOntEthernetVlanServicePortro INTEGER .1.3.6.1.4.1.9056.5.6.3.1.1.3 |
iShelfOntEthernetVlanServiceListIndicates the set of layer-2 VLANs supported on the associated ethernet port. NOTE: The current release only supports a single VLAN profile per ONT ethernet port. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfVlanListPointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.1.1.4 |
iShelfOntEthernetVlanServiceSubscriberIspVlanTagThe subscriber scope numeric VLAN tag used to distinguish ISP (Layer-3/PPPoE) traffic from Layer-2 traffic on the port. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfVlanTag (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.1.1.5 |
iShelfOntEthernetVlanServiceAdminStateNOTE: this object can only be modified with a non-active rowStatus.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.1.1.6 |
iShelfOntEthernetVlanServiceRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.1.1.7 |
iShelfOntEthernetOption82TableThe ONT Ethernet Option82 table is used to contain the Option82 Agent Remote id sub-option strings associated with a given ONT Ethernet port. SEQUENCE OF IShelfOntEthernetOption82Entry .1.3.6.1.4.1.9056.5.6.3.2 |
iShelfOntEthernetOption82EntryEach row identifies an Option82 Agent Remote id string. IShelfOntEthernetOption82Entry .1.3.6.1.4.1.9056.5.6.3.2.1 |
iShelfOntEthernetOption82LocationTypeThis object identifies the location type of the provisioning.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.2.1.1 |
iShelfOntEthernetOption82LocationThis object identifies the logical ONT for the provisioning if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.2.1.2 |
iShelfOntEthernetOption82SLCIndexThis object indicates the applicable subscriber line card index.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.2.1.3 |
iShelfOntEthernetOption82PortThis object indicates the applicable port on the subscriber line cardro INTEGER .1.3.6.1.4.1.9056.5.6.3.2.1.4 |
iShelfOntEthernetOption82ServiceTypeThis object indexes the string table by service type for each portro IShelfOntEthernetServiceType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.2.1.5 |
iShelfOntEthernetOption82AgentRemoteIdThis object specifies the Option82 Agent Remote Id sub option string.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.2.1.6 |
iShelfOntEthernetOption82RowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.2.1.7 |
iShelfOntEthernetDynamicHostServiceTable SEQUENCE OF IShelfOntEthernetDynamicHostServiceEntry .1.3.6.1.4.1.9056.5.6.3.3 |
iShelfOntEthernetDynamicHostServiceEntry IShelfOntEthernetDynamicHostServiceEntry .1.3.6.1.4.1.9056.5.6.3.3.1 |
iShelfOntEthernetDynamicHostServiceLocationTypero IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.3.1.1 |
iShelfOntEthernetDynamicHostServiceLocationro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.3.1.2 |
iShelfOntEthernetDynamicHostServiceSLCIndexro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.3.1.3 |
iShelfOntEthernetDynamicHostServicePortro INTEGER .1.3.6.1.4.1.9056.5.6.3.3.1.4 |
iShelfOntEthernetDynamicHostServiceTypero IShelfOntEthernetServiceType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.3.1.5 |
iShelfOntEthernetDynamicHostServiceDhcpProfileThis object can be populated with the default DHCP Profile for the case where the service type is data. In this case that no VCI/Option60 String matching is possible for the request this entry if present will be used to provide the DHCP request to the associated server(s). NOTE: this object can only be modified with a non-active rowStatus.rw IShelfDhcpProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.3.1.6 |
iShelfOntEthernetDynamicHostServiceVciRelayProfileNOTE: this object can only be modified with a non-active rowStatus.rw IShelfVciRelayProfilePointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.3.1.7 |
iShelfOntEthernetDynamicHostServiceMaxLeasesNOTE: this object can only be modified with a non-active rowStatus.rw INTEGER .1.3.6.1.4.1.9056.5.6.3.3.1.8 |
iShelfOntEthernetDynamicHostServiceRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.3.1.9 |
iShelfOntEthernetMacRelayServiceTableThe MAC Relay table provides the ability to configure a DHCP relay agent for a specified MAC address. SEQUENCE OF IShelfOntEthernetMacRelayServiceEntry .1.3.6.1.4.1.9056.5.6.3.4 |
iShelfOntEthernetMacRelayServiceEntryEach row configures a separate relay agent for a MAC address. IShelfOntEthernetMacRelayServiceEntry .1.3.6.1.4.1.9056.5.6.3.4.1 |
iShelfOntEthernetMacRelayServiceLogicalIdThe logical ID of the ONT.ro IShelfOntLogicalId (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.4.1.1 |
iShelfOntEthernetMacRelayServiceSLCIndexThe subscriber line card on the ONT.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.4.1.2 |
iShelfOntEthernetMacRelayServicePortThe Ethernet port on the ONT.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.4.1.3 |
iShelfOntEthernetMacRelayServiceIndexEach Ethernet port supports up to 8 MAC relays.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.4.1.4 |
iShelfOntEthernetMacRelayServiceAddressThe DHCP relay agent will be configured for this specific MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.4.1.5 |
iShelfOntEthernetMacRelayServiceTypeThe type of service defined for this relay. Note that only SDV service type is supported initially.rw IShelfOntEthernetServiceType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.4.1.6 |
iShelfOntEthernetMacRelayServiceDhcpProfileThe DHCP profile to utilize for this relay.rw IShelfDhcpProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.4.1.7 |
iShelfOntEthernetMacRelayServiceRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.4.1.8 |
iShelfOntEthernetStaticHostServiceTableThis table defines static host IP addresses for CPE equipment. SEQUENCE OF IShelfOntEthernetStaticHostServiceEntry .1.3.6.1.4.1.9056.5.6.3.5 |
iShelfOntEthernetStaticHostServiceEntryEach row is a separate static host IP address. Note that static host IP addresses must be unique within the system. IShelfOntEthernetStaticHostServiceEntry .1.3.6.1.4.1.9056.5.6.3.5.1 |
iShelfOntEthernetStaticHostServiceLocationTypeThe location type for this service entry for the ONT.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.5.1.1 |
iShelfOntEthernetStaticHostServiceLocationThe logical ID of the ONT if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.5.1.2 |
iShelfOntEthernetStaticHostServiceSLCIndexThe subscriber line card on the ONT.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.5.1.3 |
iShelfOntEthernetStaticHostServicePortThe Ethernet port on the ONT.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.5.1.4 |
iShelfOntEthernetStaticHostServiceIndexEach Ethernet port can have up to 16 static IP addresses assigned. Static IP addresses can be provisioned for both data and SDV service. Note that data and SDV service each support 8 static host addresses.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.5.1.5 |
iShelfOntEthernetStaticHostServiceIpAddressThe static host IP address that will be utilized by the CPE.rw IpAddress .1.3.6.1.4.1.9056.5.6.3.5.1.6 |
iShelfOntEthernetStaticHostServiceIpMaskThe subnet mask for the subscriber network.rw IpAddress .1.3.6.1.4.1.9056.5.6.3.5.1.7 |
iShelfOntEthernetStaticHostServiceTypeThe type of service utilizing this static host address. Both data and SDV service types are supported.rw IShelfOntEthernetServiceType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.5.1.8 |
iShelfOntEthernetStaticHostServiceSppThis object identifies the service provider profile associated with the uplink.rw IShelfSppIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.5.1.9 |
iShelfOntEthernetStaticHostServiceRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.5.1.10 |
iShelfOntEthernetStaticSubnetServiceTableThis table defines static subnets for subscriber networks. SEQUENCE OF IShelfOntEthernetStaticSubnetServiceEntry .1.3.6.1.4.1.9056.5.6.3.6 |
iShelfOntEthernetStaticSubnetServiceEntryEach row defines a separate subscriber subnet. Note that subnets must be unique within the system and also must not overlap. IShelfOntEthernetStaticSubnetServiceEntry .1.3.6.1.4.1.9056.5.6.3.6.1 |
iShelfOntEthernetStaticSubnetServiceLocationTypeThe location type of the ONT.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.6.1.1 |
iShelfOntEthernetStaticSubnetServiceLocationThe logical ID of the ONT if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.6.1.2 |
iShelfOntEthernetStaticSubnetServiceSLCIndexThe subscriber line card on the ONT.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.6.1.3 |
iShelfOntEthernetStaticSubnetServicePortThe Ethernet port on the ONT.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.6.1.4 |
iShelfOntEthernetStaticSubnetServiceIndexEach Ethernet port supports up to 8 subnets.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.6.1.5 |
iShelfOntEthernetStaticSubnetServiceSubnetAddressThe definition of the subscriber subnet. Note that the /32 address defines the default gateway (i.e. ONT) for the subnet. The subnet mask defines the subnet address space.rw IpAddress .1.3.6.1.4.1.9056.5.6.3.6.1.6 |
iShelfOntEthernetStaticSubnetServiceSubnetMaskDefines the class of the subscriber subnet.rw IpAddress .1.3.6.1.4.1.9056.5.6.3.6.1.7 |
iShelfOntEthernetStaticSubnetServiceNexthopThe IP address of the next hop in the downstream direction (toward the subscriber). For example, the address of the router on the subscriber network.rw IpAddress .1.3.6.1.4.1.9056.5.6.3.6.1.8 |
iShelfOntEthernetStaticSubnetServiceUpstreamNexthopThe IP address of the next hop in the upstream direction (toward the provider network). For example, the address of the router on the service provider network.rw IpAddress .1.3.6.1.4.1.9056.5.6.3.6.1.9 |
iShelfOntEthernetStaticSubnetServiceTypeThe type of service utilizing this subnet. Note that only the data type of service is supported initially.rw IShelfOntEthernetServiceType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.6.1.10 |
iShelfOntEthernetStaticSubnetServiceSppThis object identifies the service provider profile associated with the uplink.rw IShelfSppIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.6.1.11 |
iShelfOntEthernetStaticSubnetServiceRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.6.1.12 |
iShelfOntEthernetPPPoEServiceTable SEQUENCE OF IShelfOntEthernetPPPoEServiceEntry .1.3.6.1.4.1.9056.5.6.3.7 |
iShelfOntEthernetPPPoEServiceEntry IShelfOntEthernetPPPoEServiceEntry .1.3.6.1.4.1.9056.5.6.3.7.1 |
iShelfOntEthernetPPPoEServiceLocationTypero IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.7.1.1 |
iShelfOntEthernetPPPoEServiceLocationro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.7.1.2 |
iShelfOntEthernetPPPoEServiceSLCIndexro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.7.1.3 |
iShelfOntEthernetPPPoEServicePortro INTEGER .1.3.6.1.4.1.9056.5.6.3.7.1.4 |
iShelfOntEthernetPPPoEServiceAdminStateNOTE: this object can only be modified with a non-active rowStatus.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.7.1.5 |
iShelfOntEthernetPPPoEServiceOperStatero IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.7.1.6 |
iShelfOntEthernetPPPoEServiceMaxDialogsNOTE: this object can only be modified with a non-active rowStatus.rw INTEGER .1.3.6.1.4.1.9056.5.6.3.7.1.7 |
iShelfOntEthernetPPPoEServiceInactivityTimeoutTimeout in seconds NOTE: this object can only be modified with a non-active rowStatus.rw INTEGER .1.3.6.1.4.1.9056.5.6.3.7.1.8 |
iShelfOntEthernetPPPoEServiceSppThis object identifies the service provider profile associated with the uplink supporting the PPPoE service. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfSppIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.7.1.9 |
iShelfOntEthernetPPPoEServiceRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.7.1.10 |
iShelfGetDhcpLeasesTableThis table is used to initiate a query of the current DHCP IP address leases for a specified ONT Ethernet port. Creation of a row in this table initiates the query. If a subsequent query for the same index is desired, that row must first be destroyed and then recreated. When a row in this table is destroyed, associated rows in the Dhcp Lease Table (contains the results of the query) will also be destroyed. Hence a row must not be destroyed unless a subsequent query for the same index is desired. This table supports 10 row instances. It is possible to initiate queries for 10 ONT Ethernet ports at one time. The agent will delete the oldest row from the table if the max. # of entries is reached, and a new entry is requested. SEQUENCE OF IShelfGetDhcpLeasesEntry .1.3.6.1.4.1.9056.5.6.3.8 |
iShelfGetDhcpLeasesEntryCreation of a row gets the DHCP lease information for the specified port. IShelfGetDhcpLeasesEntry .1.3.6.1.4.1.9056.5.6.3.8.1 |
iShelfGetDhcpLeasesLocationTypeThe location type of the DHCP lease that is to be queried.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.8.1.1 |
iShelfGetDhcpLeasesLocationThe logical ID of the ONT that is to be queried if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.8.1.2 |
iShelfGetDhcpLeasesSLCIndexThe subscriber line card on the ONT that is to be queried.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.8.1.3 |
iShelfGetDhcpLeasesPortThe Ethernet port on the ONT that is to be queried.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.8.1.4 |
iShelfGetDhcpLeasesStatusThe status of this query operation.ro Enumeration .1.3.6.1.4.1.9056.5.6.3.8.1.5 |
iShelfGetDhcpLeasesRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.8.1.6 |
iShelfDhcpLeaseTableThis table holds all the current DHCP lease information for a given ONT Ethernet port for which a lease information retrieval request has been added in the iShelfGetDhcpLeasesTable. The information in this table is as current as the request entry in the iShelfGetDhcpLeasesTable. Rows in this table are deleted when the corresponding row in the iShelfGetDhcpLeasesTable is deleted. SEQUENCE OF IShelfDhcpLeaseEntry .1.3.6.1.4.1.9056.5.6.3.9 |
iShelfDhcpLeaseEntryEach row is a separate DHCP IP address. IShelfDhcpLeaseEntry .1.3.6.1.4.1.9056.5.6.3.9.1 |
iShelfDhcpLeaseLocationTypeThe location type where this DHCP address resides.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.1 |
iShelfDhcpLeaseLocationThe logical ID of the ONT where this DHCP address resides if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.2 |
iShelfDhcpLeaseSLCIndexThe subscriber line card on the ONT where this DHCP address resides.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.3 |
iShelfDhcpLeasePortThe Ethernet port on the ONT where this DHCP address resides.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.9.1.4 |
iShelfDhcpLeaseIpAddressThe DHCP IP address that has an active lease on the ONT Ethernet port.ro IpAddress .1.3.6.1.4.1.9056.5.6.3.9.1.5 |
iShelfDhcpLeaseMacAddressThe MAC address of the CPE that has been assigned this DHCP IP address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.6 |
iShelfDhcpLeaseOriginalLeaseTimeThe maximum time this lease can be held.ro Integer32 .1.3.6.1.4.1.9056.5.6.3.9.1.7 |
iShelfDhcpLeaseRemainingLeaseTimeThe time remaining before this lease will expire.ro Integer32 .1.3.6.1.4.1.9056.5.6.3.9.1.8 |
iShelfDhcpLeaseInfoGetTimeThe date and time that this information was retrieved. So the user can determine if this information is stale and should be retrieved again.ro IShelfDateTime (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.9 |
iShelfDhcpLeaseRelayTypeThe type of DHCP relay for this DHCP IP address.ro Enumeration .1.3.6.1.4.1.9056.5.6.3.9.1.10 |
iShelfDhcpLeaseServiceTypeThe type of service this DHCP IP address is used for.ro IShelfOntEthernetServiceType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.11 |
iShelfDhcpLeaseOption82???ro Enumeration .1.3.6.1.4.1.9056.5.6.3.9.1.12 |
iShelfDhcpLeaseDhcpServerProfile???ro IShelfDhcpProfileIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.13 |
iShelfDhcpLeasePortLocationTypeThe location type for this DHCP Lease Port address.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.14 |
iShelfDhcpLeasePortLocationThe logical ID of the ONT where this DHCP Lease Port address resides if the location type is logical, or the Node/Shelf/Slot of the DHCP Lease Port if the location type is physical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.15 |
iShelfDhcpLeaseSppId???ro IShelfSppIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.16 |
iShelfDhcpLeasePortVlanIdThe VLAN ID of the ONT where this DHCP Lease Port address resides.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.9.1.17 |
iShelfDhcpLeaseClearSetting this to true will force the lease for this DHCP IP address to be cleared and deleted from the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.9.1.18 |
iShelfL3DataServiceTableThis table is used for enabling/disabling all Layer 3 Data Services on an ONT Ethernet port. Layer 3 data services can be provisioned via the Dynamic Host table, Static Host table, and Static Subnet table. SEQUENCE OF IShelfL3DataServiceEntry .1.3.6.1.4.1.9056.5.6.3.10 |
iShelfL3DataServiceEntryEach row defines if the Layer 3 data service is enabled/disabled for the specified Ethernet port. IShelfL3DataServiceEntry .1.3.6.1.4.1.9056.5.6.3.10.1 |
iShelfL3DataServiceLocationTypeThe location type of the L3 Data Service Entry.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.10.1.1 |
iShelfL3DataServiceLocationThe logical ID of the ONT if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.10.1.2 |
iShelfL3DataServiceSLCIndexThe subscriber line card on the ONT.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.10.1.3 |
iShelfL3DataServicePortThe Ethernet port on the ONT.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.10.1.4 |
iShelfL3DataServiceAdminStateThe administrative state of the Layer 3 data service.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.10.1.5 |
iShelfL3DataServiceOperStateThe operational state of the Layer 3 data service.ro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.10.1.6 |
iShelfL3DataServiceRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.10.1.7 |
iShelfGetArpBindingsTableThis table is used to initiate a query of the current ARP Binding IP address arp bindings for a specified ONT Ethernet port. Creation of a row in this table initiates the query. If a subsequent query for the same index is desired, that row must first be destroyed and then recreated. When a row in this table is destroyed, associated rows in the Arp Binding Table (contains the results of the query) will also be destroyed. Hence a row must not be destroyed unless a subsequent query for the same index is desired. This table supports 10 row instances. It is possible to initiate queries for 10 ONT Ethernet ports at one time. The agent will delete the oldest row from the table if the max. # of entries is reached, and a new entry is requested. SEQUENCE OF IShelfGetArpBindingsEntry .1.3.6.1.4.1.9056.5.6.3.11 |
iShelfGetArpBindingsEntryCreation of a row gets the ARP Binding information for the specified port. IShelfGetArpBindingsEntry .1.3.6.1.4.1.9056.5.6.3.11.1 |
iShelfGetArpBindingsLocationTypeThe location type of the ARP Binding that is to be queried.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.11.1.1 |
iShelfGetArpBindingsLocationThe logical ID of the ONT that is to be queried if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.11.1.2 |
iShelfGetArpBindingsSLCIndexThe subscriber line card on the ONT that is to be queried.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.11.1.3 |
iShelfGetArpBindingsPortThe Ethernet port on the ONT that is to be queried.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.11.1.4 |
iShelfGetArpBindingsStatusThe status of this query operation.ro Enumeration .1.3.6.1.4.1.9056.5.6.3.11.1.5 |
iShelfGetArpBindingsRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.11.1.6 |
iShelfArpBindingTableThis table holds all the current ARP Binding information for a given ONT Ethernet port for which a arp binding information retrieval request has been added in the iShelfGetArpBindingsTable. The information in this table is as current as the request entry in the iShelfGetArpBindingsTable. Rows in this table are deleted when the corresponding row in the iShelfGetArpBindingsTable is deleted. SEQUENCE OF IShelfArpBindingEntry .1.3.6.1.4.1.9056.5.6.3.12 |
iShelfArpBindingEntryEach row is a separate Arp Binding IP address. IShelfArpBindingEntry .1.3.6.1.4.1.9056.5.6.3.12.1 |
iShelfArpBindingLocationTypeThe location type where this ARP address resides.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.12.1.1 |
iShelfArpBindingLocationThe logical ID of the ONT where this ARP address resides if the location type is logical.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.12.1.2 |
iShelfArpBindingSLCIndexThe subscriber line card on the ONT where this ARP address resides.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.12.1.3 |
iShelfArpBindingPortThe Ethernet port on the ONT where this ARP address resides.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.12.1.4 |
iShelfArpBindingIpAddressThe ARP IP address that has an active lease on the ONT Ethernet port.ro IpAddress .1.3.6.1.4.1.9056.5.6.3.12.1.5 |
iShelfArpBindingMacAddressThe MAC address of the CPE that has been assigned this ARP IP address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.12.1.6 |
iShelfArpBindingRelayTypeThe type of ARP relay for this ARP IP address.ro Enumeration .1.3.6.1.4.1.9056.5.6.3.12.1.7 |
iShelfArpBindingServiceTypeThe type of service this ARP IP address is used for.ro IShelfOntEthernetServiceType (ISHELF-TC) .1.3.6.1.4.1.9056.5.6.3.12.1.8 |
iShelfArpBindingTTL???ro INTEGER .1.3.6.1.4.1.9056.5.6.3.12.1.9 |
iShelfArpBindingEntryNumber???ro INTEGER .1.3.6.1.4.1.9056.5.6.3.12.1.10 |
iShelfArpBindingPortVlanIdThe VLAN ID of the ONT where this ARP Binding Port address resides.ro INTEGER .1.3.6.1.4.1.9056.5.6.3.12.1.11 |
iShelfArpBindingClearSetting this to true will force the lease for this ARP IP address to be cleared and deleted from the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.6.3.12.1.12 |
iShelfDataMIBThe MIB module for managing the Data Services provisioning. MODULE-IDENTITY .1.3.6.1.4.1.9056.5.11.7 |