ISHELF-PORT-MIB
The MIB module for managing the Ports/Circuits provisioning.
Main OID:
iShelfPortMIB.1.3.6.1.4.1.9056.5.11.5
110
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
110 total| Object Name |
|---|
iShelfOntPotsPortTableThis table defines the ONT POTS port provisioning. SEQUENCE OF IShelfOntPotsPortEntry .1.3.6.1.4.1.9056.5.4.1 |
iShelfOntPotsPortEntryEach row is a separate ONT POTS port. IShelfOntPotsPortEntry .1.3.6.1.4.1.9056.5.4.1.1 |
iShelfOntPotsPortLogicalIdThe logical ID of the ONT where the POTS port resides.ro IShelfOntLogicalId (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.1 |
iShelfOntPotsPortSLCIndexThe line card on the ONT containing the POTS port.ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.2 |
iShelfOntPotsPortIndexThe POTS port.ro INTEGER .1.3.6.1.4.1.9056.5.4.1.1.3 |
iShelfOntPotsPortConserveAdminStateThe conserve admin state is the administrative state of the port when the ONT is operating on battery backup power. When operating on battery, locking the state means battery conservation is active and the port will be shut down. Unlocking the state means battery power is not conserved. The unlocked state is used for a critical service that must remain operational if battery backup power is active.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.4 |
iShelfOntPotsPortHookStateThe current hook state, or telephone receiver position, of the POTS port.ro IShelfHookState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.5 |
iShelfOntPotsPortImpedanceThe current POTS port impedance setting. The unit is ohms.ro Unsigned32 .1.3.6.1.4.1.9056.5.4.1.1.6 |
iShelfOntPotsPortRxGainThe current POTS port receiver gain setting.ro INTEGER .1.3.6.1.4.1.9056.5.4.1.1.7 |
iShelfOntPotsPortTxGainThe current POTS port transmitter gain setting.ro INTEGER .1.3.6.1.4.1.9056.5.4.1.1.8 |
iShelfOntPotsPortLabelThis is the user description of the port.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.9 |
iShelfOntPotsPortAdminStateThis indicates the desired administrative state of the port.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.10 |
iShelfOntPotsPortOperStateThis indicates the current operational status of the port.ro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.11 |
iShelfOntPotsPortLoopbackConfigThis indicates the desired loopback state of the port.rw IShelfLoopback (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.12 |
iShelfOntPotsPortLoopbackStatusThis indicates the current loopback state of the port.ro IShelfLoopback (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.13 |
iShelfOntPotsPortTransmissionModeThis object identifies the on-hook transmission (OHT) mode. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfTransmissionMode (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.14 |
iShelfOntPotsPortSupervisoryModeThis object identifies the supervisory signaling mode for the line. NOTE: this object can only be modified with a non-active rowStatus.rw IShelfSupervisoryMode (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.1.1.15 |
iShelfOntPotsPortRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.1.1.16 |
iShelfOntEthernetTableThe ONT ethernet port table is used to provision the ethernet port(s) for service and for monitoring the current state of the port. The table is used to manage all ethernet ports for each ONT supported by the system. Rows in this table are automatically created when an ONT is provisioned. The table is indexed by ONT logical ID, ONT subscriber line card index, and ethernet port number. SEQUENCE OF IShelfOntEthernetEntry .1.3.6.1.4.1.9056.5.4.2 |
iShelfOntEthernetEntryEach entry corresponds to a single ONT ethernet port. IShelfOntEthernetEntry .1.3.6.1.4.1.9056.5.4.2.1 |
iShelfOntEthernetLocationTypero IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.1 |
iShelfOntEthernetLocationro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.2 |
iShelfOntEthernetSLCIndexro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.3 |
iShelfOntEthernetPortro INTEGER .1.3.6.1.4.1.9056.5.4.2.1.4 |
iShelfOntEthernetConserveAdminStateThe conserve admin state is the administrative state of the port when the ONT is operating on battery backup power. When operating on battery, locking the state means battery conservation is active and the port will be shut down. Unlocking the state means battery power is not conserved. The unlocked state is used for a critical service that must remain operational if battery backup power is active.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.5 |
iShelfOntEthernetAdminModerw IShelfEthernetPortMode (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.6 |
iShelfOntEthernetOperModero IShelfEthernetPortMode (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.7 |
iShelfOntEthernetBandwidthProfilePointerrw IShelfOltBandwidthPointer (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.8 |
iShelfOntEthernetTrafficModerw IShelfEthernetTrafficMode (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.9 |
iShelfOntEthernetMacAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.2.1.10 |
iShelfOntEthernetLabelThis is the user description of the port.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.11 |
iShelfOntEthernetAdminStateThis indicates the desired administrative state of the port.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.12 |
iShelfOntEthernetOperStateThis indicates the current operational status of the port.ro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.2.1.13 |
iShelfOntEthernetRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.2.1.14 |
iShelfOntRfPortTable SEQUENCE OF IShelfOntRfPortEntry .1.3.6.1.4.1.9056.5.4.3 |
iShelfOntRfPortEntry IShelfOntRfPortEntry .1.3.6.1.4.1.9056.5.4.3.1 |
iShelfOntRfPortLogicalIdro IShelfOntLogicalId (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.3.1.1 |
iShelfOntRfPortSLCIndexSLCIndex may be i-rf, n-exp1, or n-exp2ro IShelfOntSubscriberLineCardIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.3.1.2 |
iShelfOntRfPortIndexPort Index is 1 for i-rf or 1..4 for n-exp1 and n-exp2.ro INTEGER .1.3.6.1.4.1.9056.5.4.3.1.3 |
iShelfOntRfPortConserveAdminStateThe conserve admin state is the administrative state of the port when the ONT is operating on battery backup power. When operating on battery, locking the state means battery conservation is active and the port will be shut down. Unlocking the state means battery power is not conserved. The unlocked state is used for a critical service that must remain operational if battery backup power is active.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.3.1.4 |
iShelfOntRfPortLabelThis is the user description of the port.rw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.3.1.5 |
iShelfOntRfPortAdminStateThis indicates the desired administrative state of the port.rw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.3.1.6 |
iShelfOntRfPortOperStateThis indicates the current operational status of the port.ro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.3.1.7 |
iShelfOntRfPortRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.3.1.8 |
iShelfPotsPortTable SEQUENCE OF IShelfPotsPortEntry .1.3.6.1.4.1.9056.5.4.4 |
iShelfPotsPortEntry IShelfPotsPortEntry .1.3.6.1.4.1.9056.5.4.4.1 |
iShelfPotsPortLocationIdentifies the Node/Shelf/Slot of the host cardro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.1 |
iShelfPotsPortCircuitIdentifies the POTS circuit 1..8 of the host cardro IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.2 |
iShelfPotsPortSystemGainSets the gain for the pots circuitrw IShelfSystemGain (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.3 |
iShelfPotsPortImpedanceSets the impedance for the pots circuit. NOTE: The impedance for the circuit should be set to the same impedance as the device it is connected to.rw IShelfImpedance (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.4 |
iShelfPotsPortEnableCompressionIndicates if compression is enabled for the circuitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.4.1.5 |
iShelfPotsPortBlockedCallTreatmentIndicates the blocked call treatment for the circuitrw IShelfBlockedCallTreatment (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.6 |
iShelfPotsPortLabelA user description of the circuitrw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.7 |
iShelfPotsPortAdminStateThe desired administrative state for the circuitrw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.8 |
iShelfPotsPortOperStateThe current operational state for the circuitro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.4.1.9 |
iShelfPotsPortRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.4.1.10 |
iShelfDdsPortTable SEQUENCE OF IShelfDdsPortEntry .1.3.6.1.4.1.9056.5.4.5 |
iShelfDdsPortEntry IShelfDdsPortEntry .1.3.6.1.4.1.9056.5.4.5.1 |
iShelfDdsPortLocationNode/Shelf/Slot location of the DDS circuitro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.5.1.1 |
iShelfDdsPortCircuitCircuit number of the DDS circuit (5 or 6)ro IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.5.1.2 |
iShelfDdsPortDataRateDesired data rate in Kbps.rw IShelfDdsDataRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.5.1.3 |
iShelfDdsPortErrorCorrectionEnable error correction for the circuitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.5.1.4 |
iShelfDdsPortLatchingLoopbackEnable latching loopback for the circuitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.5.1.5 |
iShelfDdsPortEnableEnhancedSignalQualityDetectorenable enhanced signal quality detector for the circuitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.5.1.6 |
iShelfDdsPortSwitch56ServiceOptionenable switch-56 service (standard or enhanced) for the circuit.rw Enumeration .1.3.6.1.4.1.9056.5.4.5.1.7 |
iShelfDdsPortEnableSecondaryChannelenable the secondary channel for the circuitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.5.1.8 |
iSheldDdsPortDigitalTandemOperationenable digital tandem operation for the circuitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.5.1.9 |
iShelfDdsPortZeroSuppressionenable zero suppression for the circuitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.5.1.10 |
iShelfDdsPortLabeluser description of the circuitrw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.5.1.11 |
iShelfDdsPortAdminStatedesired operational state of the circuitrw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.5.1.12 |
iShelfDdsPortOperStatethe operational state of the circuitro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.5.1.13 |
iShelfDdsPortRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.5.1.14 |
iShelfPortServicesTable SEQUENCE OF IShelfPortServicesEntry .1.3.6.1.4.1.9056.5.4.6 |
iShelfPortServicesEntry IShelfPortServicesEntry .1.3.6.1.4.1.9056.5.4.6.1 |
iShelfPortServicesLocationTypeThis object identifies whether the port location is addressed as logical or physical.ro IShelfLocationType (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.6.1.1 |
iShelfPortServicesLocationNode/Shelf/Slot location of the Port for physical addressing or the logical ONT identifier for logical addressing.ro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.6.1.2 |
iShelfPortServicesCircuitCircuit number of the Portro IShelfCircuit (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.6.1.3 |
iShelfPortServicesServiceTypeService configured on the portro Enumeration .1.3.6.1.4.1.9056.5.4.6.1.4 |
iShelfPortServicesPortTypeThe equipment type of the portro Enumeration .1.3.6.1.4.1.9056.5.4.6.1.5 |
iShelfPortServicesCountThe number of instances of a given servicero INTEGER .1.3.6.1.4.1.9056.5.4.6.1.6 |
iShelfDs3PortTable SEQUENCE OF IShelfDs3PortEntry .1.3.6.1.4.1.9056.5.4.7 |
iShelfDs3PortEntry IShelfDs3PortEntry .1.3.6.1.4.1.9056.5.4.7.1 |
iShelfDs3PortLocationIdentifies the Node/Shelf/Slot of the host cardro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.1 |
iShelfDs3PortFrameFormatSets the Frame Format for the DS3 portrw IShelfDs3FrameFormat (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.2 |
iShelfDs3PortLBODetermines selection of DS3 Line Build Out.rw IShelfDs3LBO (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.3 |
iShelfDs3PortFERFAlarmsDetermines selection of the DS3 automatic FERF Alarms.rw IShelfDs3FERFAlarms (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.4 |
iShelfDs3PortTimingDetermines selection of DS3 Timing.rw IShelfDs3Timing (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.5 |
iShelfDs3PortATMModeDetermines selection of the DS3 ATM Mode.rw IShelfDs3ATMMode (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.6 |
iShelfDs3PortCellPayloadScrambleDetermines selection of the DS3 Cell Payload Scrambling.rw IShelfDs3CellPayloadScramble (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.7 |
iShelfDs3PortLabelA user description of the circuitrw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.8 |
iShelfDs3PortAdminStateThe desired administrative state for the circuitrw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.9 |
iShelfDs3PortOperStateThe current operational state for the circuitro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.10 |
iShelfDs3PortLoopbackConfigThis indicates the desired loopback state of the port.rw IShelfLoopback (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.11 |
iShelfDs3PortLoopbackStatusThis indicates the current loopback state of the port.ro IShelfLoopback (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.7.1.12 |
iShelfDs3PortRowStatusThis object is used to modify the status of the associated row. Settable objects within the row can only be modified when the row is in the notInService state. The notInService setting has no impact on the underlying Object but is used to cause atomic updates of the row once it is move to the active state. The supported values of RowStatus are: active (1) notInService (2)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.7.1.13 |
iShelfOltPonPortTable SEQUENCE OF IShelfOltPonPortEntry .1.3.6.1.4.1.9056.5.4.8 |
iShelfOltPonPortEntry IShelfOltPonPortEntry .1.3.6.1.4.1.9056.5.4.8.1 |
iShelfOltPonPortLocationIdentifies the Node/Shelf/Slot of this OLT PON port configro IShelfLocation (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.1 |
iShelfOltPonPortPonIndexThe PON index on the OLT card. There are 2 types of OLT cards: a two PON and a four PON version.ro IShelfOltPonIndex (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.2 |
iShelfOltPonPortMaxSdvStreamsDetermines the maximum number of SDV Streams for this PON.rw IShelfOltPonSdvStreams (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.3 |
iShelfOltPonPortSdvStreamAlertLevelDetermines the SDV Stream alert level.rw IShelfOltPonSdvStreams (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.4 |
iShelfOltPonPortMaxSdvBwDetermines selection of the maximum SDV Bandwidth.rw IShelfOltSdvPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.5 |
iShelfOltPonPortSdvBwAlertLevelDetermines selection of the SDV Bandwidth Alert Level.rw IShelfOltSdvPonBandwidthRate (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.6 |
iShelfOltPonPortAdminStateThe desired administrative state for the OLT PON portrw IShelfAdminState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.7 |
iShelfOltPonPortOperStateThe current operational state for the OLT PON portro IShelfOperState (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.8 |
iShelfOltPonPortLabelA user description of the OLT PON portrw IShelfLabel (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.9 |
iShelfOltPonPortLoopbackConfigThis indicates the desired loopback state of the OLT PON port.rw IShelfLoopback (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.10 |
iShelfOltPonPortLoopbackStatusThis indicates the current loopback state of the OLT PON port.ro IShelfLoopback (ISHELF-TC) .1.3.6.1.4.1.9056.5.4.8.1.11 |
iShelfOltPonPortRowStatusThis object is used for row creation, modification and deletion. Modification of objects within the row is only allowed when the row is not in the active state. In the case of an active row (already created), the row must be made notInService prior to modifying any settable objects. The notInService setting has no impact on the underlying object but is used to cause atomic updates of the row once it is moved to the active state. The supported values of RowStatus are: active (1) notInService (2) notReady (3) createAndGo (4) createAndWait (5) destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9056.5.4.8.1.12 |
iShelfPortMIBThe MIB module for managing the Ports/Circuits provisioning. MODULE-IDENTITY .1.3.6.1.4.1.9056.5.11.5 |