IPGW-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IPGW-MIB.
32
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
ipgw OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.13 |
ipgwCfg OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.13.1 |
ipgwCfgTableThe IP Gateway Card Configuration Table contains an entry
for each of the manageable IP Gateway Card in the chassis.
It contains objects that reflect the current configuration
of parameters that affect the operation of all the entities
that reside on the given card. SEQUENCE OF IpgwCfgEntry .1.3.6.1.4.1.429.1.13.1.1 |
ipgwCfgEntryThere is one IP Gateway Card Configuration table entry per
IP Gateway Card in the chassis. IpgwCfgEntry .1.3.6.1.4.1.429.1.13.1.1.1 |
ipgwCfgIndexA unique value for each IP Gateway Card in the chassis.
The value of ipgwCfgIndex matches the value of the index
for the corresponding IP Gateway Card entity in the entity
table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.13.1.1.1.1 |
ipgwCfgLocalIpAdrsSpecifies the local IP address used by the IP Gateway Card
for management related access.rw IpAddress .1.3.6.1.4.1.429.1.13.1.1.1.2 |
ipgwCfgGatewayIpAdrsSpecifies the IP address of the gateway for the IP Gateway
card.rw IpAddress .1.3.6.1.4.1.429.1.13.1.1.1.3 |
ipgwCfgTrapDestSpecifies whether the IP Gateway Card sends SNMP traps to
the NMC or only to its locally configured management
stations. Default=local.rw Enumeration .1.3.6.1.4.1.429.1.13.1.1.1.4 |
ipgwCfgGatewayNetMaskSpecifies the subnet mask for the IP Gateway Card.rw IpAddress .1.3.6.1.4.1.429.1.13.1.1.1.5 |
ipgwCfgEthnetFramingSpecifies the type of ethernet framing used by the IP
Gateway Card.rw Enumeration .1.3.6.1.4.1.429.1.13.1.1.1.6 |
ipgwCfgEthIfaceNameSpecifies the name of the ethernet interface that is to be
used by the IP Gateway Card.rw DisplayString .1.3.6.1.4.1.429.1.13.1.1.1.7 |
ipgwCfgDefMgmtStationIpIP address of a management station allowed to manage the IP
Gateway Card. Used with the community string for management
security. Default =0.0.0.0.rw IpAddress .1.3.6.1.4.1.429.1.13.1.1.1.8 |
ipgwCfgDefCommStrSpecifies the default SNMP community string to be used by a
management station in communicating with the IP Gateway
Card. Used with the default management station IP address
for management security access.rw DisplayString .1.3.6.1.4.1.429.1.13.1.1.1.9 |
ipgwCmd OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.13.3 |
ipgwCmdTableThe IP Card Command table contains an entry for each of the
manageable IP Gateway Card in the chassis. It provides a
means through which to take specific actions on one or more
IP Gateway cards in the NAS chassis. SEQUENCE OF IpgwCmdEntry .1.3.6.1.4.1.429.1.13.3.1 |
ipgwCmdEntryThere is one IP Gateway Card Command entry per IP Gateway
Card in the chassis. IpgwCmdEntry .1.3.6.1.4.1.429.1.13.3.1.1 |
ipgwCmdIndexA unique value for each IP Gateway Card in the chassis.
The value of this object matches the value of the index of
the correspond1ing IP Gateway Card's entry in the entity
table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.13.3.1.1.1 |
ipgwCmdMgtStationIdThis object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a given command are the results of a command
issued by that specific MS. Each MS must SET a unique
value to this object when doing commands and GET the value
of this object together with ipgwCmdReqId and ipgwCmdResult
to detect interference from other MSs.rw OCTET STRING .1.3.6.1.4.1.429.1.13.3.1.1.2 |
ipgwCmdReqIdThis object contains the value of the request-id field in
the SNMP PDU which invoked the current or most recent
command or test on this IP Gateway Card. If the request-id
is unknown or undefined, this object contains the value
zero.ro INTEGER .1.3.6.1.4.1.429.1.13.3.1.1.3 |
ipgwCmdFunctionThis object contains a value which describes the command
which is being invoked.rw Enumeration .1.3.6.1.4.1.429.1.13.3.1.1.4 |
ipgwCmdForceIn some cases, the IP Gateway Card may be in a state such
that certain commands could adversely affect connections.
In such cases, a command request with this object not
present or set to noForce will result in a warning. If the
operator elects to ignore such warnings, this object can be
set to force in a subsequent issue of the command to cause
the command to be carried out regardless of its potentially
hazzardous effects.rw Enumeration .1.3.6.1.4.1.429.1.13.3.1.1.5 |
ipgwCmdParamThis object contains parameters that are specific to the
particular command being issued. In some cases, there will
be no aditional parameters required.rw OCTET STRING .1.3.6.1.4.1.429.1.13.3.1.1.6 |
ipgwCmdResultThis object contains the result of the most recently
requested command or test, or the value none(1) if no
commands have been requested since the last reset.ro Enumeration .1.3.6.1.4.1.429.1.13.3.1.1.7 |
ipgwCmdCodeThe value of this object upon command completion indicates
a further description of what went wrong if the command was
unsuccessful. In the case of tests, a bit mapped result of
each of the sub-tests performed can be found in the status
table.ro Enumeration .1.3.6.1.4.1.429.1.13.3.1.1.8 |
ipgwTrap OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.13.4 |
ipgwTrapEnaTableTable containing objects to enable traps on the IP Gateway
Cards in the chassis. SEQUENCE OF IpgwTrapEnaEntry .1.3.6.1.4.1.429.1.13.4.1 |
ipgwTrapEnaEntryThere is one entry for each IP Gateway Card in the
chassis. IpgwTrapEnaEntry .1.3.6.1.4.1.429.1.13.4.1.1 |
ipgwTrapEnaIndexA unique index identifying the IP Gateway Card to which the
trap enable objects pertain.ro INTEGER .1.3.6.1.4.1.429.1.13.4.1.1.1 |
ipgwTrapEnaUiResetEnables reporting of traps for card reset requests
initiated from the Gateway NAC user interface.rw Enumeration .1.3.6.1.4.1.429.1.13.4.1.1.2 |