INFINERA-ENTITY-CHASSIS-MIB
The INFINERA-ENTITY-CHASSIS-MIB provides SNMP-based management for the physical chassis inventory and status attributes of Infinera transport network equipment. It enables monitoring of chassis-level metrics including hardware component presence, slot occupancy, and physical device states within the managed infrastructure.
Imported Objects
Objects
63 total| Object Name |
|---|
chassisMIBThis MIB is modeling for CHASSIS equipment table. MODULE-IDENTITY .1.3.6.1.4.1.21296.2.2.2.1.13 |
chassisTableThis table contains all chassis modules that are currently present in a network element. SEQUENCE OF ChassisEntry .1.3.6.1.4.1.21296.2.2.2.1.13.1 |
chassisEntryA row in the CHASSIS table. Each row in the table is identified with a unique entPhysicalIndexID. ChassisEntry .1.3.6.1.4.1.21296.2.2.2.1.13.1.1 |
chassisMoIdThis is the primary Key of the objects e.g 1, 2, 3...rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.1 |
chassisProvChassisTypeThe provisioned chassis. Valid values: OTC, DTC, DTC-A, DTC-B, and MTC-A.rw InfnChassisType (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.2 |
chassisInstalledChassisTypeThe installed chassis type.ro InfnChassisType (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.3 |
chassisProvSerialNumberThe provisioned serial number of the Expansion Chassis. This field is configured for the expansion chassis in a multi-chassis configuration. This attribute can be modified only when the Admin State of the chassis (Expansion Chassis only) is Locked.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.4 |
chassisInstalledSerialNumberThe actual serial number of the chassisro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.5 |
chassisRackNameThe name of the rack in which the chassis is installed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.6 |
chassisRUlocationInRackThe position of the chassis within the rack. The chassis with lower RU location is displayed at the bottom in the node view and the one with higher number is displayed at the top. If there are more than two chassis having the same rack name, they are displayed next to each other though they might be physically located in the same rack.rw Unsigned32 .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.7 |
chassisSwitchCapabilityModeThe switch capability mode for the chassis. Valid values: ring and mesh.rw Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.8 |
chassisInletTemperatureTemperature (in Centigrade) of the circuit pack at the inlet. The temperature is displayed as -1 if the circuit pack does not have a temperature sensor.ro FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.9 |
chassisAcoStateThe chassis alarm cutoff state.rw Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.10 |
chassisBayLevelSummaryAlarmReportingFlag that enables reporting of bay-level alarms. Typically, this is enabled for one chassis within a bay and disabled for all other chassis in the same bay. Vaid values:enabled and disabled.rw Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.11 |
chassisConfiguredMaxPowerDrawThe estimated power drawn by the chassis. This varies depending on the type of the chassis and associated configuration.rw FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.12 |
chassisCurrentEstimatedPowerDrawThe sum of estimated power drawn by all the currently installed and pre-provisioned FRUs in the chassis. This value is not indicative of the actual power drawn.ro FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.13 |
chassisEqptMaxPowerDrawThe estimated power drawn by the chassis. This varies depending on the type of the chassis and associated configuration.ro FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.14 |
chassisScmMigrationAllowedThis objects indicate whether user can chnage the chassisSwitchCapabilityMode. If this is false user will not be able to chnage.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.15 |
chassisScmMigrationInProgressThis objects indicate that switch capability mode change is in progress.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.16 |
chassisPowerControlThis objects enable the auto power saving if pwoer is hitting the limit.ro Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.17 |
chassiscurrentInstalledPowerDrawThe estimated power drawn by the installed equipment in chassis. This varies depending on the type of the chassis and installed equipment.ro FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.18 |
chassisConfiguredPemRatingThis attribute tells what is the compatible PEM rating for the chassis , in case of PEM-35 this attribute should be set to 35 and in case of PEM-70 it should be set to 70. Accordingly RatingAmps attribute of PEM will change and in case RatingAmps value of PEM doesn't matche with its InstalledRatingAmps then equipment mismatch alarm will be raised.rw Unsigned32 .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.19 |
chassisRowStatusThe row status of this CHASSIS entry. Because rows in this table are indexed by entPhysicalIndex, to create a new row one must choose a value of entPhysicalIndex that is not already in use. A side-effect of the creation of a row in this table is the creation of a corresponding row in the eqptTable and the entPhysicalTable. The status may not be set to active if the chassisMoId, chassisProvEqptType and other read-create objects are not set to valid values. This row may only be deleted if it was a pre-provisioned row and the hardware is not present. If this row is deleted, the associated row in the Eqpt Table and entPhysicalTable will be deleted by the agent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.20 |
chassisIsNCChassiswhether or not this chassis houses the Node Controller XCM.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.21 |
chassisSwitchingModecurrent configuration of the chassis switch fabric module.ro InfnChassisSwitchingMode .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.22 |
chassisMaxAvailablePowerMaximum available power in the chassisro FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.23 |
chassisActvTimingSourcero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.24 |
chassisOperatingTemperatureThresholdrw Integer32 .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.25 |
chassisConfiguredAmbientTemprw Unsigned32 .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.26 |
chassisSkewBudgetrw Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.27 |
chassisPduCktBreakerRatingrw FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.28 |
chassisRebootTimero Integer32 .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.29 |
chassisCLEIro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.30 |
chassisHardwareVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.31 |
chassisManufacturedDatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.32 |
chassisPartNumberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.33 |
chassisPONro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.34 |
chassisHolderTypero Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.35 |
chassisHolderStatero Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.36 |
chassisAcceptableEquipmentTypeListro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.37 |
chassisUnreachableFromManagementro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.38 |
chassisSerialPortCLIAccessrw InfnEnableDisable (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.39 |
chassisAcliSessionAdminStaterw InfnEnableDisable (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.40 |
chassisFruInsertionDatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.41 |
chassisPowerSupplyTyperw Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.42 |
chassisBaffleTyperw Enumeration .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.43 |
chassisPmHistStatsEnablero InfnPmHistStatsControl .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.44 |
chassisInletTemperatureOffsetInlet Temperature Offsetrw FloatTenths (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.45 |
chassisHasPluggableEepromFlag to indicate if the device has pluggable Eepromro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.46 |
chassisPluggablePromSerialNumberPlugged in Eeprom serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.47 |
chassisOutletTemperatureThe outlet temperature of the chassisro FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.48 |
chassisTTLMaxro Integer32 .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.49 |
chassisTTLCurrentDaysro Integer32 .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.50 |
chassisAvailablePowerAvailable power in the chassisro FloatArbitraryPrecision (INFINERA-TC-MIB) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.51 |
chassisSwitchFabricModecurrent configuration of the chassis switch fabric module.rw InfnChassisOxmSwitchingMode .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.52 |
chassisPicDspVerPIC DSP Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.53 |
chassisClientPowerModeselected client power moderw InfnClientPowerMode .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.54 |
chassisClientPowerModeStatusclient power mode selectedro InfnClientPowerMode .1.3.6.1.4.1.21296.2.2.2.1.13.1.1.55 |
chassisConformance OBJECT IDENTIFIER .1.3.6.1.4.1.21296.2.2.2.1.13.3 |
chassisCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.21296.2.2.2.1.13.3.1 |
chassisCompliance Unknown .1.3.6.1.4.1.21296.2.2.2.1.13.3.1.1 |
chassisGroups OBJECT IDENTIFIER .1.3.6.1.4.1.21296.2.2.2.1.13.3.2 |
chassisGroup Unknown .1.3.6.1.4.1.21296.2.2.2.1.13.3.2.1 |
More MIBs from Infinera
Browse all InfineraMIBs →The LUM-WDM-MIB module facilitates the monitoring and management of WDM trunk interfaces, passive optical interfaces, and associated protection groups within optical transport networks. It provides granular visibility into interface status, signal parameters, and protection switching states to ensure the integrity of wavelength division multiplexing infrastructure.
The LUM-REG MIB module provides the global OID namespace registration for Transmode hardware and software platforms, enabling the monitoring of proprietary device-specific metrics such as optical transceiver parameters, line interface states, and system resource utilization. This module serves as the foundational registry for Transmode's SNMP agents, allowing network management systems to access standardized and vendor-specific data points for operational telemetry and fault isolation.
The LUM-EQUIPMENT-MIB module provides SNMP-based monitoring and configuration of Lumex hardware infrastructure, specifically tracking subrack status, board states, power supply health, fan operation, and slot occupancy. This MIB enables granular visibility into physical layer components and environmental conditions for telecommunications or industrial networking equipment.
The LUM-OA-MIB module enables monitoring and configuration of optical amplifier interfaces within Lumentum optical transport equipment, exposing performance metrics such as input/output optical power, gain levels, pump laser currents, and alarm states for amplifier health assessment.
The LUM-IFPERF-MIB module enables SNMP-based monitoring and configuration of physical and data-link layer performance metrics, specifically tracking Forward Error Correction (FEC), G.826 error rates, and Layer 0 through Layer 2 statistics on optical transport interfaces. It provides uni-directional and general attribute tables to manage time-stamped performance data for interface administration and error analysis.
The LUM-SYSTEM-MIB module provides granular monitoring and configuration of system node parameters, date/time synchronization, license status, and authentication settings (RADIUS/TACACS+) for Lumex or LUM-series network appliances. It exposes specific metrics for user account management, authentication server configurations, and system licensing data to facilitate centralized identity and access control auditing.