IMDM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
31
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
imdm OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.19 |
imdmCc OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.19.1 |
imdmCcTableA table containing the call control parameters for each
modem in the chassis. SEQUENCE OF ImdmCcEntry .1.3.6.1.4.1.429.1.19.1.1 |
imdmCcEntryCall control parameters for an ISDN modem. These define
the sequence of operation related to how a call is
negotiated. ImdmCcEntry .1.3.6.1.4.1.429.1.19.1.1.1 |
imdmCcIndexThe index which uniquely identifies the modem to which this
entry is applicable. The value corresponds to the value of
the index to the entity table in the chassis MIB that
corresponds to the same modem.ro INTEGER .1.3.6.1.4.1.429.1.19.1.1.1.1 |
imdmCcRateAdapV110This object enables V110 rate adaption corresponds to S
register S67 bit 0. Default = enable(2).rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.2 |
imdmCcFixedNtwkRateThis object sets the fixed network rate. This object
correspond to S register S67 bit 1. Default = 1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.3 |
imdmCcNetworkRateThis object sets the Network rate speed. This object
corresponds to the modem S register S67 bit 2. Default = 1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.4 |
imdmCcBcLinkDlyThis object enable a 45 - 65 second link delay. This object
corresponds to the S register S67 bit 4. Default = 1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.5 |
imdmCcAnlgOvrDigThis object is used to set S register S68 bit 0 which, does
not allow analog calls over digital data connection.
Default = 1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.6 |
imdmCcAsyncPPPThis object is used to disable/enable async PPP/ sync PPP
conversion. This object corresponds to S register S68 bit
2. Default = enable(1).rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.7 |
imdmCcX75This object is used to disable/enable X75. This object
corresponds to S register S68 bit 3. Default = 1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.8 |
imdmCcStarV2This object is used to set the data mode of the modem and
is equivalent to *V2 = x AT command. Default =1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.9 |
imdmCcStarU1This object is used to set the originate HDLC protocols of
the modem and is equivalent to *U1 = x AT command. Default
=2rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.10 |
imdmCcStarU2This object is used to set the originate Non-HDLC protocols
of the modem and is equivalent to *U2 = x AT command.
Default =1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.11 |
imdmCcStarU3This object is used to set the originate Analog modem/fax
data mode of the modem and is equivalent to *U3 = x AT
command. Default =2rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.12 |
imdmCcV120This Object is used to Enable/Disable V120. This Object
corresponds to S register 68 bit 4 default=1rw Enumeration .1.3.6.1.4.1.429.1.19.1.1.1.13 |
imdmCcFrameSizeThis Object is used to set the Frame size for X75. Default
= 2048rw INTEGER .1.3.6.1.4.1.429.1.19.1.1.1.14 |
imdmCcWindowSizeThis Object is used to set the Window Size of X75
default=2rw INTEGER .1.3.6.1.4.1.429.1.19.1.1.1.15 |
imdmLi OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.19.2 |
imdmLiTableA list of configurable Line Interface objects for a modem.
The number of table entries is given by modem Number. SEQUENCE OF ImdmLiEntry .1.3.6.1.4.1.429.1.19.2.1 |
imdmLiEntryObjects which define the line interface characteristics for
a particular modem. ImdmLiEntry .1.3.6.1.4.1.429.1.19.2.1.1 |
imdmLiIndexIndex into the Line Interface table. This index is the
value from the chassis mib entity relation table that is
applicable for a particular modem.ro INTEGER .1.3.6.1.4.1.429.1.19.2.1.1.1 |
imdmLiConnTypeToCoThis object is used to set the type of switch your
telephone company Cental Office is using. This object
coressponds with the *M AT modem command.rw Enumeration .1.3.6.1.4.1.429.1.19.2.1.1.2 |
imdmLiDNThis object is to set the Directory Number (DN) that is
assigned by the telephone company. This object corresponds
to the *P AT modem command.rw DisplayString .1.3.6.1.4.1.429.1.19.2.1.1.3 |
imdmLiSPIDThis object is to set the Service Profile ID (SPID) that is
assigned by the telephone company. This object corresponds
to the *S AT modem command.rw DisplayString .1.3.6.1.4.1.429.1.19.2.1.1.4 |
imdmLiTermEndPointIDThis object is to set the Terminal Endpoint ID (TEI) that
is assigned by the telephone company. This object
corresponds to the *T AT modem command.rw INTEGER .1.3.6.1.4.1.429.1.19.2.1.1.5 |
imdmLiProtTypeSwThis object is to set the Switch Protocol that the
telephone company uses. This object corresponds to the *W
AT modem command.rw Enumeration .1.3.6.1.4.1.429.1.19.2.1.1.6 |