IBM-LAN-EMULATION-EXTENSION-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IBM-LAN-EMULATION-EXTENSION-MIB.
214
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
214 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
ibmArchitecture OBJECT IDENTIFIER .1.3.6.1.4.1.2.5 |
lanEmulation OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8 |
SNMPv2-SMI-v1 Unknown .1.3.6.1.4.1.2.5.8 |
ibmLeServerX OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.3 |
ibmLeServerXMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.3.1 |
ibmLeServerXMon OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.3.1.1 |
ibmLeServerXMonLecsInstancesThe number of LECS instances currently created on this agent.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.1.1 |
ibmLeServerXMonLesInstancesThe number of LES instances currently created on this agent.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.1.2 |
ibmLeServerXMonBusInstancesThe number of BUS instances currently created on this agent.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.1.3 |
ibmLeServerXLecsMonTableThis table provides monitoring of LECS instances. SEQUENCE OF IbmLeServerXLecsMonEntry .1.3.6.1.4.1.2.5.8.3.1.2 |
ibmLeServerXLecsMonEntryEntries of ibmLeServerXLecsMonTable. IbmLeServerXLecsMonEntry .1.3.6.1.4.1.2.5.8.3.1.2.1 |
ibmLeServerXLecsMonIndexThe index used to identify this LECS instance on
this agent. This variable has the same value as
the lecsConfIndex used to identify this instance
in the LECS MIB. Integer32 .1.3.6.1.4.1.2.5.8.3.1.2.1.1 |
ibmLeServerXLecsUsedConnectionsThe number of virtual connections currently
in use by this LECS instance.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.2.1.2 |
ibmLeServerXLesMonTableThis table provides monitoring of LES instances. SEQUENCE OF IbmLeServerXLesMonEntry .1.3.6.1.4.1.2.5.8.3.1.3 |
ibmLeServerXLesMonEntryEntries of ibmLeServerXLesMonTable. IbmLeServerXLesMonEntry .1.3.6.1.4.1.2.5.8.3.1.3.1 |
ibmLeServerXLesMonIndexThe index used to identify this LES instance on
this agent. This variable has the same value as
the lesConfIndex used to identify this instance
in the LES MIB. Integer32 .1.3.6.1.4.1.2.5.8.3.1.3.1.1 |
ibmLeServerXLesMonUsedConnectionsThe number of virtual connections currently
in use by this LES instance.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.3.1.2 |
ibmLeServerXLesMonLesLecInstancesThe number of clients currently served by this
LES instance. This is the number of entries in the
lesLecTable which have successfully joined this
LES instance.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.3.1.3 |
ibmLeServerXBusMonTableThis table provides monitoring of BUS instances. SEQUENCE OF IbmLeServerXBusMonEntry .1.3.6.1.4.1.2.5.8.3.1.4 |
ibmLeServerXBusMonEntryEntries of ibmLeServerXBusMonTable. IbmLeServerXBusMonEntry .1.3.6.1.4.1.2.5.8.3.1.4.1 |
ibmLeServerXBusMonIndexThe index used to identify this BUS instance on
this agent. This variable has the same value as
the busConfIndex used to identify this instance
in the BUS MIB. Integer32 .1.3.6.1.4.1.2.5.8.3.1.4.1.1 |
ibmLeServerXBusMonUsedConnectionsThe number of virtual connections currently
in use by this BUS instance.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.4.1.2 |
ibmLeServerXBusMonBusLecInstancesThe number of clients currently served by this
BUS instance. This is the number of entries in the
busLecTable.ro Gauge32 .1.3.6.1.4.1.2.5.8.3.1.4.1.3 |
ibmLeServerXConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.3.2 |
ibmLeServerXLesConfigTableThis table provides extension for LES configuration. SEQUENCE OF IbmLeServerXLesConfigEntry .1.3.6.1.4.1.2.5.8.3.2.1 |
ibmLeServerXLesConfigEntryEntries of ibmLeServerXLesConfigTable. IbmLeServerXLesConfigEntry .1.3.6.1.4.1.2.5.8.3.2.1.1 |
ibmLeServerXLesMinLecIDThe minimum number on the LEC ID range in use by
by this LES instance. The default value is 1
the first possible LEC ID.rw Integer32 .1.3.6.1.4.1.2.5.8.3.2.1.1.1 |
ibmLeServerXLesMaxLecIDThe maximum number on the LEC ID range in use by
by this LES instance. The default value is 65279
the last possible LEC ID.rw Integer32 .1.3.6.1.4.1.2.5.8.3.2.1.1.2 |
ibmLeClientX OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4 |
ibmSuperELAN OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.1 |
ibmSEPortStatisticsTableThis table contains statistics about LAN Emulation
Control Frame Statistics for Super ELAN Bridge ports. SEQUENCE OF IbmSEPortStatisticsEntry .1.3.6.1.4.1.2.5.8.4.1.1 |
ibmSEPortStatisticsEntryA list of LE Control Frame statistical information
for each SEB port IbmSEPortStatisticsEntry .1.3.6.1.4.1.2.5.8.4.1.1.1 |
ibmSEBridgeIdThe identifier of the Super ELAN Bridge which
this LAN Emulation Client has joined. IbmSEBridgeID -- Rsyntax INTEGER .1.3.6.1.4.1.2.5.8.4.1.1.1.1 |
ibmSEPortNumThe bridge port number associated with this
Super ELAN Bridge LAN Emulation Client.
This variable directly corresponds, is equal to, the
dot1dBasePort variable in rfc1493. INTEGER .1.3.6.1.4.1.2.5.8.4.1.1.1.2 |
ibmSEPortArpRequestsInThe number of LE ARP Requests received by the
SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.3 |
ibmSEPortArpRequestsOutThe number of bridged LE ARP Requests transmitted
by the SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.4 |
ibmSEArpRequestsErrorsThe number of received LE ARP Requests that were not
bridged by the SEB portro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.5 |
ibmSEPortArpRequestsDroppedPortBlockedThe number of outgoing ARP Requests that were dropped
by the SEB port because the port was in
the blocking state.roobsolete Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.6 |
ibmSEPortArpRequestsFilteredThe number of received LE ARP Requests discarded by the
SEB port because the target MAC address in
the LE ARP Request was filtered by the bridge.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.7 |
ibmSEPortArpRepliesInThe number of LE ARP Responses received by the
SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.8 |
ibmSEPortArpRepliesOutThe number of bridged LE ARP Responses transmitted
by the SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.9 |
ibmSEPortArpRepliesErrorsThe number of received LE ARP Responses that were
dropped by the SEB port because the
SEB port originating the corresponding
LE ARP Request could not be determined.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.10 |
ibmSEPortNarpRequestsInThe number of LE NARP Requests received by the
SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.11 |
ibmSEPortNarpRequestsOutThe number of bridged LE NARP Requests transmitted
by the SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.12 |
ibmSEPortNarpRequestsDroppedPortBlockedThe number of bridged LE NARP Requests that were
dropped by the SEB port because the port
was in the blocking state.roobsolete Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.13 |
ibmSEPortFlushRequestsInThe number of LE Flush Requests received by
the SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.14 |
ibmSEPortFlushRequestsOutThe number of bridged LE Flush Requests transmitted
by the SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.15 |
ibmSEPortFlushRepliesInThe number of LE Flush Responses received by the
SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.16 |
ibmSEPortFlushRepliesOutThe number of bridged LE Flush Responses transmitted
by the SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.17 |
ibmSEPortFlushRequestErrorsThe number of bridged LE Flush Request Errors for this
SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.18 |
ibmSEPortFlushRepliesErrorsThe number of bridged LE Flush Replies Errors for this
SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.19 |
ibmSEPortLeCtrlFramesInThe total number of LE Control frames received by the
SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.20 |
ibmSEPortLeCtrlFramesOutThe total number of LE Control frames transmitted
by the SEB port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.21 |
ibmSEPortLeCtrlFramesDiscSrcPortNotFwrdThe total number of LE Control frames discarded
because the SEB source port is not forwarding.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.22 |
ibmSEPortLeCtrlFramesDiscDestPortNotFwrdThe total number of LE Control frames discarded
because the SEB destination port is not forwarding.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.1.1.23 |
ibmSEBridgeConfigTableA table that contains the Super ELAN Bridge (SEB) Configuration. SEQUENCE OF IbmSEBridgeConfigEntry .1.3.6.1.4.1.2.5.8.4.1.2 |
ibmSEBridgeConfigEntryThe configuration information for each Super ELAN Bridge instance IbmSEBridgeConfigEntry .1.3.6.1.4.1.2.5.8.4.1.2.1 |
ibmSEAtmIfNumberThe ATM interface number the Super ELAN (SE) bridging function
is associated with. This number is used to determine the NETWORK ID.
A SE Bridge (SEB) may span ATM adapters but they have to
be on the same network, as specified by the Network ID.
The specific requirement is that the LECs in the Super ELAN
can establish a Data Direct VCC.
The Network ID is an ATM configuration parameter that is required
to allow Data Direct VCC's to be established.
The value of this object must match an existing value in the ifTable.
This object is set to zero when the ATM interface is not
specified and the agent must determine itself which ATM
interface it is to use. If the agent can not determine a
default ATM interface an error should be returned by the
agent.rw IfIndexOrZero -- Rsyntax INTEGER .1.3.6.1.4.1.2.5.8.4.1.2.1.1 |
ibmSEEnabledWhen enabled(1) the SE Bridge (SEB) will bridge frames to the
ports defined in its bridging domain. When disabled(2) the SEB
will not bridge frames.rw Enumeration .1.3.6.1.4.1.2.5.8.4.1.2.1.2 |
ibmSENameThis is a user provided name to associate with the SEB.
The SEB name is independent of the ELANs names of the
constituent ELANs of the SEB.
No default, name must be specified.rw DisplayString .1.3.6.1.4.1.2.5.8.4.1.2.1.3 |
ibmSEFrameSizeIndicates the maximum SuperElan frame size. All ELANs in a
single SEB must be set to the same maximum frame size.
Valid Values 1516, 4544, 9234, 18190
Default for Ethernet 1516, the Default for Token Ring is 4544
Since ibmSEType defaults to Token Ring the MIB documents
the ibmSEFrameSize DEFVAL to be 4544. However, if on row creation
ibmSEType is set to Ethernet sebEN(1), and ibmSEFrameSize
is not specified, the default value used by the agent should be
1516.rw Enumeration .1.3.6.1.4.1.2.5.8.4.1.2.1.4 |
ibmSEMacCacheAgeThe number of seconds a learned MAC address remains in the
data frame forwarding cache without revalidation.rw INTEGER .1.3.6.1.4.1.2.5.8.4.1.2.1.5 |
ibmSERDCacheAgeThe number of seconds a learned route descriptor remains in the
data frame forwarding cache without revalidation.rw INTEGER .1.3.6.1.4.1.2.5.8.4.1.2.1.6 |
ibmSEPriorityThe SuperElan Bridge spanning tree priority.
A lower value will increase the likelihood of a SuperElan
bridge becoming the root. This value is appended to the
SuperElan Spanning Tree MAC Address to form a SuperElan
Bridge ID.rw INTEGER .1.3.6.1.4.1.2.5.8.4.1.2.1.7 |
ibmSEMaxAgeThe age at which the current Spanning Tree configuration is
deemed too old. A value to small may cause the spanning tree to
unnecessarily reconfigure. A value to large will increase the
time it takes for the spanning tree to form once an outage
is detected.rw INTEGER .1.3.6.1.4.1.2.5.8.4.1.2.1.8 |
ibmSEBridgeHelloTimeThe interval of time in seconds between the generation of
Spanning Tree configuration messages generate by the root.
Lower values increase the spanning tree robustness, but
increase network traffic overhead. Higher values decrease
network control traffic but decrease spanning tree robustness.rw INTEGER .1.3.6.1.4.1.2.5.8.4.1.2.1.9 |
ibmSEBridgeForwardDelayThe delay in seconds that the SEB waits before
transitioning to the next port state. The forward delay should
be large enough to allow all Super ELAN bridges in the
SuperELAN to disable ports in the new topology while the new
spanning tree is being set up prior to forwarding data frames.
Values too low might cause temporary loops in the SuperELAN,
because not all bridges will complete the spanning tree updates.
While values too large, lengthen network partitions after the
spanning tree has converged, which causes data frame delays.
The default value indicated that the bridge will begin forwarding
frames 30 seconds after the spanning tree has converged: 15 seconds
in listening state and 15 seconds in learning state.rw INTEGER .1.3.6.1.4.1.2.5.8.4.1.2.1.10 |
ibmSEBridgeAddressThe Bridge MAC Address identifies the SuperELAN for the purposes
of maintaining the SEB Spanning tree. If no value is configured,
the SEB interface with the lowest MAC address will be used. This
6 octet Spanning Tree MAC Address is added to the value of the
SuperELAN priority found in ibmSEPriority to create a SEB ID.rw MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.1.2.1.11 |
ibmSETypeThis object indicates the type of SEB. sebEN(1)
specifies a type of Ethernet, sebTR(2) specific's a type of
Token Ring.rw Enumeration .1.3.6.1.4.1.2.5.8.4.1.2.1.12 |
ibmSEConfigRowStatusThis object is used to create or delete entries (rows)
in the SuperElan Bridge Configuration Table.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.2.5.8.4.1.2.1.13 |
ibmSEPortConfigTableA table that contains SuperELAN Bridge Port Configuration. SEQUENCE OF IbmSEPortConfigEntry .1.3.6.1.4.1.2.5.8.4.1.3 |
ibmSEPortConfigEntryThe configuration information for each SuperELAN Bridge Port IbmSEPortConfigEntry .1.3.6.1.4.1.2.5.8.4.1.3.1 |
ibmSEPortIfNumberThe interface number associated with this port.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.3.1.1 |
ibmSEPortElanNameThe ELAN Name in which the SuperElan Bridge LEC participates.
If the ELAN Name matches that of a LES/BUS on the same node,
a SEB-LEC interface is automatically added to the configuration,
and the SEB-LEC parameters needed to join the ELAN are read
from the local ELAN configuration. If the ELAN name does not
match that of a LES/BUS on the same node, the SEB-LEC must be
configured to join the specified ELAN.
No Default value a name must be specified.rw DisplayString .1.3.6.1.4.1.2.5.8.4.1.3.1.2 |
ibmSEPortRemoteElanThis object indicates whether or not the Super ELAN LE
Services (LES/BUS) for the ELAN specified by ibmSEPortElanName
are local to the same node as the port or not.
If false(2) the LE Services are local, if true(1) the LE Services
are remote (not resident at the same node as the SuperElan).
Default is local ELAN.rw Enumeration .1.3.6.1.4.1.2.5.8.4.1.3.1.3 |
ibmSEPortEnabledWhen enabled(1) the SuperELAN will bridge frames through this
SEB port. When disabled(2) the SuperELAN will not bridge frames
through this port.rw Enumeration .1.3.6.1.4.1.2.5.8.4.1.3.1.4 |
ibmSEPortPriorityThis value influences which port is used when two or more
ports are connected to the same network segment. This situation
may cause a routing loop and a the priority provides a port selection
method. A lower value represents a higher priority.
?Is Define ports and interfaces as bit 16 going to be a problem.?
Put in to agent capabilities and check in agent.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.3.1.5 |
ibmSEPortRootCostThe cost added to the root path cost in the Spanning Tree
configuration message received on this port in order to
determine the path cost to get to the root bridge through
this port. Setting this value small increases the probability
that this port will be close to the root bridge, and thus
asked to carry more broadcast and unknown unicast traffic.rw INTEGER .1.3.6.1.4.1.2.5.8.4.1.3.1.6 |
ibmSEPortRowStatusThis object is used to create or delete entries (rows)
in the SuperElan Bridge Port Configuration Table.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.2.5.8.4.1.3.1.7 |
ibmSEBridgeTableA table that contains bridge information for the SEB. SEQUENCE OF IbmSEBridgeEntry .1.3.6.1.4.1.2.5.8.4.1.4 |
ibmSEBridgeEntryEach entry (row) contains additional SEB pertaining to
a specific SEB instance. IbmSEBridgeEntry .1.3.6.1.4.1.2.5.8.4.1.4.1 |
ibmSENumPortsThe number of ports defined for this SEB.
This number can be used to determine the next available
port number for row creation in any of the SEB Port Tables.
Of course the next available index is determined by adding
one to the number of ports defined.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.4.1.1 |
ibmSEProtocolSpecificationThe protocol type used for this SEB. Currently only
Transparent Bridging with Source Route Awareness (tbSra(2))
is the only defined protocol type for SEB's.ro Enumeration .1.3.6.1.4.1.2.5.8.4.1.4.1.2 |
ibmSETimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.5.8.4.1.4.1.3 |
ibmSETopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.4.1.4 |
ibmSEDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.1.4.1.5 |
ibmSERootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.4.1.6 |
ibmSERootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.4.1.7 |
ibmSEBridgeMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.2.5.8.4.1.4.1.8 |
ibmSEHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout .1.3.6.1.4.1.2.5.8.4.1.4.1.9 |
ibmSEHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.4.1.10 |
ibmSEForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
ibmSEBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout .1.3.6.1.4.1.2.5.8.4.1.4.1.11 |
ibmSEMacLearnedEntryDiscardsThe total number of Mac Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.4.1.12 |
ibmSERDLearnedEntryDiscardsThe total number of Route Descriptor Forwarding Database
entries, which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.4.1.13 |
ibmSEStpPortTableA table that contains port-specific information and
Spanning Tree Protocol information for each SEB Port. SEQUENCE OF IbmSEStpPortEntry .1.3.6.1.4.1.2.5.8.4.1.5 |
ibmSEStpPortEntryA list of SEB information maintained for each SEB port. IbmSEStpPortEntry .1.3.6.1.4.1.2.5.8.4.1.5.1 |
ibmSEStpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see ibmSEPortEnable), this object
will have a value of disabled(1).
forwarding(1) - port is in forwarding state
learning(2) - port is in learning state
listening(3) - port is in listening state
blocked(4) - this port is blocked by spanning tree
configured(5) - this port is waiting for spanning tree
netdown(6) - this ports network interface is down
configuring(7) - this port is loading LEC configuration
unknown(8) - this port is in some unknown statero Enumeration .1.3.6.1.4.1.2.5.8.4.1.5.1.1 |
ibmSEStpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.1.5.1.2 |
ibmSEStpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.5.1.3 |
ibmSEStpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.1.5.1.4 |
ibmSEStpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.5.1.5 |
ibmSEStpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.5.1.6 |
ibmSEPortMaxInfoThe maximum size of the INFO (non-MAC) field that
this port will receive or transmit.ro INTEGER .1.3.6.1.4.1.2.5.8.4.1.5.1.7 |
ibmSEPortDataStatisticsTableThis table contains statistics about LAN Emulation
Data Frame Statistics for Super ELAN Bridge ports. SEQUENCE OF IbmSEPortDataStatisticsEntry .1.3.6.1.4.1.2.5.8.4.1.8 |
ibmSEPortDataStatisticsEntryA list of LE Data Frame statistical information
for each SEB port IbmSEPortDataStatisticsEntry .1.3.6.1.4.1.2.5.8.4.1.8.1 |
ibmSEPortInFramesThe number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.1 |
ibmSEPortOutFramesThe number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.2 |
ibmSEPortRoutedInFramesFrames received on this port that were routed, rather than,
or in addition to, bridged.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.3 |
ibmSEPortBpduFramesCount of SE BPDU Framesro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.4 |
ibmSEPortInDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.5 |
ibmSEPortDropSrcAddrFiltersFrames dropped due to Source Address filteringro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.6 |
ibmSEPortDropDestAddrFiltersFrames dropped due to destination address filtering. These are
frames to destinations on the same LAN that they arrived on,
or otherwise filtered by the filtering database of the bridge.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.7 |
ibmSEPortDropProtocolFiltersFrames dropped due to user filtering of particular protocol
identifiers.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.8 |
ibmSEPortDropSrcNotFwdsFrames received on this port when it was not in forwarding
state (mostly in learning state).ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.9 |
ibmSEPortDropDestNotFwdsFrames not sent because output port not in forwarding state.
Don't know which port they tag on yet.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.10 |
ibmSEPortDropInputOverflowsFrames dropped due to input queue overflow.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.11 |
ibmSEPortDropBpduOverflowsBPDU's dropped due to BPDU input queue overflow.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.12 |
ibmSEPortDropSrOverflowsSource Route Frames dropped due to SR input queue overflow.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.13 |
ibmSEPortRecNoBuffFailuresReceive frames discarded due to no buffer available.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.14 |
ibmSEPortTransmitFailuresFrame Count of transmit failures.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.15 |
ibmSEPortToBigFailuresCount of frames to big to sent on this port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.16 |
ibmSEPortLanIdFailuresCount of frames discarded due to mismatch in the LAN ID.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.17 |
ibmSEPortStpLanIdFailuresCount of frames discarded due to duplicate LAN ID or
spanning tree error.ro Counter32 .1.3.6.1.4.1.2.5.8.4.1.8.1.18 |
ibmBbcmMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.2 |
ibmBbcmConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.2.1 |
ibmBbcmConfigNextIdThe next available index in the ibmBbcmConfigTable.
The value of this object can be used as the index by the
network manager to create an entry in the table.
This object is no longer required since the ibmBbcmConfigIndex
is now specified as the superElanID.roobsolete Integer32 .1.3.6.1.4.1.2.5.8.4.2.1.1 |
ibmBbcmConfigTableThis table contains configuration values for the Bridging
Broadcast Manager (BBCM). SEQUENCE OF IbmBbcmConfigEntry .1.3.6.1.4.1.2.5.8.4.2.1.2 |
ibmBbcmConfigEntryEach entry of the table represents a configured instance
of the BBCM. IbmBbcmConfigEntry .1.3.6.1.4.1.2.5.8.4.2.1.2.1 |
ibmBbcmConfigIndexA value which uniquely identifies a conceptual row of the
BBCM Configuration Table.
Since BBCM is a bridge based function, each row of this table
identifies a unique bridge instance. IbmSEBridgeID -- Rsyntax INTEGER .1.3.6.1.4.1.2.5.8.4.2.1.2.1.1 |
ibmBbcmNameThis is the name associated with the bridge instance. It is
either the Super Elan Bridge name or the name assigned
to the base bridge.ro DisplayString .1.3.6.1.4.1.2.5.8.4.2.1.2.1.2 |
ibmBbcmConfigRowStatusThis object is used to create or
delete entries in the ibmBbcmConfigTable.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.2.5.8.4.2.1.2.1.3 |
ibmBbcmProtocolConfigTableEach entry of the table represents a configured instance
of a specific protocol for a particular BBCM instance. SEQUENCE OF IbmBbcmProtocolConfigEntry .1.3.6.1.4.1.2.5.8.4.2.1.3 |
ibmBbcmProtocolConfigEntryEach entry of the table represents a configuration information
for a specific protocol supported by a specific BBCM. IbmBbcmProtocolConfigEntry .1.3.6.1.4.1.2.5.8.4.2.1.3.1 |
ibmBbcmProtocolTypeBBCM Protocols Supported. For ease in implementation
the enumerated types for ibmBbcmProtocolType and
ibmBbcmStatProtocolType are equivalent.
Note: 1 is reserved so ibmBbcmStatProtocolType of 1 can be all.
This allows enumeration values to match between ibmBbcmProtocolType
and ibmBbcmStatProtocolType. Enumeration .1.3.6.1.4.1.2.5.8.4.2.1.3.1.1 |
ibmBbcmProtocolOperStatusThe current BBCM Status
Note for this implementation other is defined only to be consistent
with standard LE server MIBs, it has no meaning for the definition.ro Enumeration .1.3.6.1.4.1.2.5.8.4.2.1.3.1.2 |
ibmBbcmProtocolAdminStatusThe desired state of the BBCM as prescribed by the
operator. The actions of the agent will, if at all possible,
eventually result in the desired state being reflected in the
ibmBbcmProtocolOperStatus.rw Enumeration .1.3.6.1.4.1.2.5.8.4.2.1.3.1.3 |
ibmBbcmProtocolCacheAgeThe number of minutes a protocol is cached by BBCM before
being added due to inactivity.rw Integer32 .1.3.6.1.4.1.2.5.8.4.2.1.3.1.4 |
ibmBbcmStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.2.2 |
ibmBbcmStatTableThis table contains activity statistics on a BBCM basis. SEQUENCE OF IbmBbcmStatEntry .1.3.6.1.4.1.2.5.8.4.2.2.1 |
ibmBbcmStatEntryEach entry of the tables represents a BBCM protocol instance. IbmBbcmStatEntry .1.3.6.1.4.1.2.5.8.4.2.2.1.1 |
ibmBbcmStatProtocolTypeBBCM Protocols Supported. For ease in implementation
the enumerated types for ibmBbcmProtocolType and
ibmBbcmStatProtocolType are equivalent.
When the protocol type is 1 (allprotocols) the response
contains the total count for all protocols supported by
this BBCM. Enumeration .1.3.6.1.4.1.2.5.8.4.2.2.1.1.1 |
ibmBbcmStatInReceivesNumber of packets processed by BBCM for this protocolro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.2 |
ibmBbcmStatInOctetsNumber of Octets processed by BBCM for this protocol.
This count is of all octets seen, including control
information like headers.ro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.3 |
ibmBbcmStatOutManagedNumber of packets transformed by BBCM from broadcast to
unicast for this protocol.ro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.4 |
ibmBbcmStatOutManagedOctetsNumber of Octets transformed by BBCM from broadcast to
unicast for this protocol.
This count is of all octets seen, including control
information like headers.ro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.5 |
ibmBbcmStatOutNotManagedThe number of packets seen by BBCM that were left as they
were originally broadcast.ro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.6 |
ibmBbcmStatOutNotManagedOctetsThe number of octets seen by BBCM that were left as they
were originally broadcast.
This count is of all octets seen, including control
information like headers.ro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.7 |
ibmBbcmStatOutFilteredNumber of Packets Filtered by BBCM.ro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.8 |
ibmBbcmStatOutFilteredOctetsNumber of Octets Filtered by BBCM.ro Counter32 .1.3.6.1.4.1.2.5.8.4.2.2.1.1.9 |
ibmVlan OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.3 |
ibmVlanGGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.3.1 |
ibmVlanGOGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.3.1.1 |
ibmVlanConfIndexNextIDThis is the next available Vlan Index for this agent. If should be
used when creating rows in the Vlan tables indexed by ibmVlanConfIndex.ro IbmVlanIndex -- Rsyntax Integer32 .1.3.6.1.4.1.2.5.8.4.3.1.1.1 |
ibmVlanTopologyChangeThis is the time stamp at which time the last VLAN Topology Change
occurred. This object can be used to monitor the change status of
the VLANs controlled by this agent.
A change is defined whenever a VLAN has been added, deleted
or changes configuration.
A change is also defined when a port is discovered or is aged out.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.2.5.8.4.3.1.1.2 |
ibmVlanMaxPortMapThis is the maximum number of octets this agent supports
for representing ports in the the Port Map objects which use
the textual convention IbmVlanPortMap.ro Integer32 .1.3.6.1.4.1.2.5.8.4.3.1.1.3 |
ibmVlanMaxUDSWMaskFilterThis is the maximum number of octets this agent supports for
ibmVlanUDSWMask or ibmVlanUDSWFilter. The Mask and Filter must
contain the same number of octets.ro Integer32 .1.3.6.1.4.1.2.5.8.4.3.1.1.4 |
ibmVlanCGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.3.2 |
ibmVlanConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.3.2.1 |
ibmVlanConfTableThe layout of the VLAN MIB tables relies on common information
and VLAN type specific information.
The ibmVlanConfTable is the base table. Columns are added to
this table depending on the VLAN type, for example
ibmVlanIPConfTable is for IP VLANs, ibmVlanIPXConfTable is
for IPX VlANS, ibmVlanUDSWConfTable is for User Defined Sliding
Window based VLANs, and ibmVlanMacConfTable is for MAC address
defined VLANs. Associated with the extended configuration
table is a base status table, ibmVlanStatusTable. This table
covers generic status and the USDW and MAC VLAN status
requirements are currently defined. Specific status table additions
are provided by the ibmVlanIpStatusTable for IP criteria. SEQUENCE OF IbmVlanConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.1 |
ibmVlanConfEntryEach entry of the ibmVlanConfTable provides configuration information
pertaining to a specific instance of a VLAN. IbmVlanConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1 |
ibmVlanConfIndexAn index assigned by the agent which uniquely identifies an instance
of a VLAN. This objects value is NOT guaranteed to be the same value
across agent restarts. IbmVlanIndex -- Rsyntax Integer32 .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.1 |
ibmVlanConfBridgeIdThe identifier of the Base Bridge or Super ELAN Bridge which
this VLAN is defined as an additional filter for.rw IbmSEBridgeID -- Rsyntax INTEGER .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.2 |
ibmVlanConfTypeThe type of VLAN.rw IbmVlanType -- Rsyntax INTEGER { -- ip(1), -- ipx(2), -- netbios(3), -- userDefSldWindo(4), -- mac(5), -- byPort(6), -- ipMulticast(7) -- } .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.3 |
ibmVlanConfAgingTimerThe amount of time (in minutes) an auto-detect port will remain in
the forwarding domain of the VLAN in the absence of traffic from that
VLAN. A value of zero means forever.rw Unsigned32 .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.4 |
ibmVlanConfForwardingPortMapDefines which ports are in forwarding state for this VLAN. The VLAN
port is in forwarding state if one of the following is true:
The port has been statically included by setting the corresponding
port in ibmVlanIncludedPortMap.
The port is not excluded, corresponding port in ibmVlanExcludedPortMap
is zero, and the port has seen VLAN traffic in the current age out period,
as defined by ibmVlanConfAgingTimer.ro IbmVlanPortMap -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.5 |
ibmVlanConfIncludedPortMapEach of the bits in the port map represents a bridge port and
defines which ports are automatically and permanently included
from the forwarding domain of the VLAN. A value of 1 for the
port means it is included. A value of 0 means the port has to
be discovered (port traffic seen) to be included in the VLAN.rw IbmVlanPortMap -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.6 |
ibmVlanConfExcludedPortMapEach of the bits in the port map represents a bridge port and
defines which ports are automatically and permanently excluded
from the forwarding domain of the VLAN. A value of 1 for the
port means it is excluded from the VLAN even if traffic for this
VLAN type is seen on this port. A value of 0 means the port can
be discovered.rw IbmVlanPortMap -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.7 |
ibmVlanConfNameA node unique user defined name for the VLAN.
This name must be unique across all bridge instances at that node (agent).rw DisplayString .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.8 |
ibmVlanConfRowStatusThis object is used to create or delete entries (rows)
in the VLAN Configuration Table.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.9 |
ibmVlanIpConfTableThe IBM VLAN Configuration Table provides the definitions required
to configure an IBM IP or IP Multicast Protocol Virtual LAN (PVLAN)
This table defines the filters for the IP or IP Multicast PVLAN
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created. SEQUENCE OF IbmVlanIpConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.2 |
ibmVlanIpConfEntryEach entry of the ibmVlanIpConfTable provides configuration information
pertaining to a specific instance of an IP or IP Multicast PVLAN. IbmVlanIpConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.2.1 |
ibmVlanIpNetworkAddrThe IP or IP Multicast address of the local forwarding component
used to route or bridge traffic for this VLAN.
No default value. A default value must be specified when creating
an IP or IP Multicast VLAN.rw IpAddress .1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.1 |
ibmVlanIpNetworkMaskThe IP address mask used to 'AND' against the IP address in a
received IP frame. The result of the 'AND' operation is compared to
the value given in the ibmVlanIPNetworkAddr in order to determine if
the frame belongs to the VLAN and should be forwarded.
There is no default value. A mask must be specified when creating an IP PVLAN
entry in the ibmVlanConfTable.
Note: if the ibmVlanConfType is IP Multicast ibmVlanIpNetworkMask
the ibmVlanIpNetworkMask is not used. A value 0.0.0.0 should be
returned by the agent.rw IpAddress .1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.2 |
ibmVlanIpCutThruFromHereSpecifies whether IP cut through communications originating from
this subnet are enabled.rw Enumeration .1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.3 |
ibmVlanIpCutThruToHereSpecifies whether IP cut through communications destined for
this subnet are enabled.rw Enumeration .1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.4 |
ibmVlanIpxConfTableThe IBM IPX VLAN Configuration Table provides the definitions required
to configure an IBM IPX Protocol Virtual LAN (PVLAN).
This table defines the filters for the IPX PVLAN.
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created. SEQUENCE OF IbmVlanIpxConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.3 |
ibmVlanIpxConfEntryEach entry of the ibmVlanIpxConfTable provides configuration information
pertaining to a specific instance of an IPX PVLAN. IbmVlanIpxConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.3.1 |
ibmVlanIpxNetworkAddrThis is the VLANs IPX Network Address.
No Default Value, one must be specified when creating an IPX PVLAN
in the ibmVlanConfTable.rw OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.2.1.3.1.1 |
ibmVlanUDSWConfTableThis table defines a 'sliding window' mechanism for the definition of
'policy' or 'user' defined VLANs. The mechanism is based on a set of
mask and filter fields that when compared to traffic data permit
forwarding decisions for the packet to be made for a VLAN.
The window may be moved or slide by defining the
appropriate offset type and offset values for the mask and filter
object fields.
Care must be taken to ensure the consistent configuration of VLAN
policies. Once a VLAN entry has been made in the table if a
change is made to any of the variables in that row for the VLAN
then all other entries in other nodes associated with the VLAN
must be updated in a corresponding manner!
This table is an auxiliary extension to the base VLAN configuration
table defined in ibmVlanConfTable.
See that table for additional Vlan details. SEQUENCE OF IbmVlanUDSWConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.4 |
ibmVlanUDSWConfEntryEach entry of the ibmVlanUDSWConfTable provides configuration information
pertaining to a specific instance of an UDSW VLAN.
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created. IbmVlanUDSWConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.4.1 |
ibmVlanUDSWOffsetTypeThis object specifies the base location in the traffic frame where
the ibmVlanUDSWOffset will be used to start the comparison with the
ibmVlanUDSWFilter value to determine if this frame is in a Sliding
Window Vlan.
Two starting location modes are predefined for LAN Emulation VLANs.
udswMacOffset indicates that the starting location is the first byte
of the MAC destination address in the traffic frame. This mode may be
used for VLAN filtering on MAC addresses, for both Token Ring traffic and
Ethernet traffic. The ibmVlanMacConfTable however should be used to
define source MAC address based VLANs. This mode may also be used for
VLAN filtering on protocol and address information or for other user
specified information found in a portion of the LLC information field
when source routed Token Ring traffic is NOT the traffic source (due
to the presence of the variable size Routing Information Field).
udswInfoOffset is a generic way of indicating that the starting
location is at the first byte of the LLC information field.
This mode may be used for VLAN filtering on protocol and address
information or for other user specified information found in a
portion of the LLC information field. For source routed Token Ring,
this location is not static within the frame since the
Routing Information Field (RIF) is of variable length depending
on LAN segments in the route. Specifying this mode permits the
offset to begin relative to the end of the last byte of the RIF.
There is no default value for this entry. The offset type
must be defined when creating a user defined sliding window VLAN
in the ibmVlanConfTable.rw Enumeration .1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.1 |
ibmVlanUDSWOffsetThis object determines the starting location in the traffic frame
that will be used in the comparison with the ibmVlanUDSWFilter
value to determine if this frame is in a Sliding Window Vlan.
It is specified as a value offset indicating the number of octets
from the base location determined by the mode selected in the
ibmVlanUSDWOffsetType.
udswMacOffset mode indicates that the starting location for the
compare is ibmVlanUDSWOffset octets after the the first byte
of the MAC destination address.
udswInfoOffset mode indicates that the starting location is
ibmVlanUDSWOffset octets after the start of the frame's
information field.
There is no default value and this offset selection mode must be
defined when creating a UDSW VLAN in the ibmVlanConfTable.rw INTEGER .1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.2 |
ibmVlanUDSWMaskThis object determines the size and bit pattern that is compared to
the traffic frame at the location specified by the offset type and
starting at the offset location in order to produce a result.
The size of the mask must be equivalent to the size of the filter
defined in ibmVlanUDSWFilter. The value of 1 in a mask bit location
has the effect of making a comparison of the mask to the traffic
frame significant. The value of a zero in a mask bit location has
the effect of making the comparison of the mask with the traffic
frame a 'don't care'.
The octets in this object are transmitted in most significant byte
first order.
There is no default value and this mask must be specified when
creating a UDSW VLAN in the ibmVlanConfTable.rw OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.3 |
ibmVlanUDSWFilterThis object determines the size and bit pattern that is compared to
the result after the mask being applied to the traffic frame
at the location specified by the offset type and starting at
the offset location.
The size of the filter must be equivalent to the size of the
mask defined in ibmVlanUDSWMask.
If the result exactly matches the bit values defined in the filter
then the frame is forwarded to the VLAN identified by the index
for this table entry.
The octets in this object are transmitted in most significant byte
first order.
There is no default value and this filter must be specified when
creating a UDSW VLAN in the ibmVlanConfTable.rw OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.4 |
ibmVlanMacConfTableThe IBM MAC VLAN Configuration Table provides the definitions required
to configure an IBM MAC Virtual LAN (VLAN).
This table defines the filters for the IBM MAC VLAN.
Entries in this table must be provided when the corresponding row
of the ibmVlanConfTable is being created. SEQUENCE OF IbmVlanMacConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.5 |
ibmVlanMacConfEntryEach entry of the ibmVlanMacConfTable provides configuration information
pertaining to a specific instance of a MAC VLAN. IbmVlanMacConfEntry .1.3.6.1.4.1.2.5.8.4.3.2.1.5.1 |
ibmVlanMacAddrIndexThe MAC address index being used as a filter for this MAC address VLAN. Integer32 .1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.1 |
ibmVlanMacAddressesA string of Source MAC addresses being used as a filter for this
MAC address VLAN.rw OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.2 |
ibmVlanMacAddrConfRowStatusThis object is used to create or delete entries (rows)
in the MAC Address Configuration Table.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.3 |
ibmVlanStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.4.3.3 |
ibmVlanStatusTableThe IBM VLAN Status Table provides the administration and
statistics for an IBM Virtual LAN (VLAN). SEQUENCE OF IbmVlanStatusEntry .1.3.6.1.4.1.2.5.8.4.3.3.1 |
ibmVlanStatusEntryEach entry in the ibmVlanStatusTable augments a specific
instance of an IP VLAN. IbmVlanStatusEntry .1.3.6.1.4.1.2.5.8.4.3.3.1.1 |
ibmVlanOperStatusCurrent state of the VLANro Enumeration .1.3.6.1.4.1.2.5.8.4.3.3.1.1.1 |
ibmVlanAdminStatusDesired state of the VLAN. This change becomes immediate
on completion of the set operation and does not require system restart.rw Enumeration .1.3.6.1.4.1.2.5.8.4.3.3.1.1.2 |
ibmVlanProcessedPacketsThe number of Broadcast/Multicast packets received by this VLAN.ro Counter32 .1.3.6.1.4.1.2.5.8.4.3.3.1.1.3 |
ibmVlanDiscardedPacketsThe number of Broadcast packets discarded by this VLAN
because the source VLAN was excluded on the port.ro Counter32 .1.3.6.1.4.1.2.5.8.4.3.3.1.1.4 |
ibmVlanDiscPktsMacThe object contains the Source MAC address from the last packet that
was discarded because the source VLAN was excluded on the port.
This will aid in finding the station that is being excluded.
This object is defined as read-write so that a manager can clear
the current Source MAC address after identifying the station that
is trying to transmit on an excluded port. In order to clear the
object the manager can specify a MAC address of all zeros 0x000000000000.rw MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.2.5.8.4.3.3.1.1.5 |
ibmVlanIpStatusTableThe IBM IP VLAN Status Table provides the administration and
statistics for an IBM IP Protocol Virtual LAN (PVLAN). SEQUENCE OF IbmVlanIpStatusEntry .1.3.6.1.4.1.2.5.8.4.3.3.2 |
ibmVlanIpStatusEntryEach entry in the ibmVlanIpStatusTable augments a specific
instance of an IP PVLAN. IbmVlanIpStatusEntry .1.3.6.1.4.1.2.5.8.4.3.3.2.1 |
ibmVlanIpCutThruFromPktsThe number of Broadcast/Multicast packets cutThru from this VLAN.ro Counter32 .1.3.6.1.4.1.2.5.8.4.3.3.2.1.1 |
ibmVlanIpCutThruToPktsThe number of Broadcast/Multicast packets received to this VLAN.ro Counter32 .1.3.6.1.4.1.2.5.8.4.3.3.2.1.2 |
ibmVlanIpCutThruFromDiscPktsThe number of Broadcast/Multicast packets discarded because cutThru
from this VLAN was disabled.ro Counter32 .1.3.6.1.4.1.2.5.8.4.3.3.2.1.3 |
ibmVlanIpCutThruToDiscPktsThe number of Broadcast/Multicast packets discarded before it is forwarded
because cutThru to this VLAN was disabled.ro Counter32 .1.3.6.1.4.1.2.5.8.4.3.3.2.1.4 |
ibmLeMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5 |
ibmLeMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.1 |
ibmLeCServerXMonLECSGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.1.1 |
ibmLeCServerXMonLESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.1.2 |
ibmLeCServerXMonBUSGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.1.3 |
ibmCSuperELANGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.1.4 |
ibmCBbcmMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.1.5 |
ibmCVlanMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.1.6 |
ibmLeMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.2 |
ibmLeMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2.5.8.5.2.1 |