SYSMON6K-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
777
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
777 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
RFC1213-MIB Unknown .1.3.6.1.4.1.2 |
ibmProd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6 |
systemsMonitor6000 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12 |
sm6kProgramInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1 |
sm6kProgramData OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.1 |
sm6kProgramDescription OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.1.1 |
sm6kProgramNameOfficial name of the AIX Systems Monitor/6000 program.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.1.1 |
sm6kProgramNumberProgram number for the AIX Systems Monitor/6000
program.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.1.2 |
sm6kProgramVersionVersion number of the AIX Systems Monitor/6000 program.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.1.3 |
sm6kProgramCompilationDateDate and time when the current agent was compiled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.1.4 |
sm6kProgramUpTimeTime (in hundredths of a second) since the
AIX Systems Monitor/6000 Program was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.1.1.1.5 |
sm6kProgramContactTextual identification of the contact person
for the AIX Systems Monitor/6000 program on this managed
node and information on how to contact this person.rw DisplayString .1.3.6.1.4.1.2.6.12.1.1.1.6 |
sm6kProgramControl OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.1.2 |
sm6kProgramControlLocalConfigurationFileName of a local configuration file. When this field is
set to a file name, a local configuration file is written
which will be used on the next initialization of the
AIX Systems Monitor/6000 program. If this field is
cleared, the default configuration files are read.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.2.1 |
sm6kProgramControlReInitializeMonitorTime AIX Systems Monitor/6000 was last initialized.
A SET to this will reinitialize the program.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.2.2 |
sm6kProgramControlNonForkCacheTimeDefault cache time, in seconds, for instrumentation
not requiring a fork.rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.2.3 |
sm6kProgramControlForkCacheTimeDefault cache time, in seconds, for instrumentation
requiring a fork.rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.2.4 |
sm6kProgramControlPercentMultiplierMultiplier used to multiply percentage variables. The
default is 100 (so 99% is 9900); 0 is treated the same
as the default.rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.2.5 |
sm6kProgramControlPollTimeReservedrw INTEGER .1.3.6.1.4.1.2.6.12.1.1.2.6 |
sm6kProgramControlFlagsReservedrw INTEGER .1.3.6.1.4.1.2.6.12.1.1.2.7 |
sm6kProgramRetryCountDefault number of retries for actions that can be
retried.rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.2.8 |
sm6kProgramTimeoutDefault number of timeout for actions that can timeout.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.1.1.2.9 |
sm6kProgramLog OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.1.3 |
sm6kProgramLogFileNameFile name for logging information in AIX Systems
Monitor/6000. The type of information being logged
depends on the trace mask (ie. sm6kProgramLogMask).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.3.1 |
sm6kProgramLogFileSizeCurrent size of the log file in bytes.ro INTEGER .1.3.6.1.4.1.2.6.12.1.1.3.2 |
sm6kProgramLogMaxFileSizeMaximum size of the log file in kilobytes.rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.3.3 |
sm6kProgramLogNumFilesMaximum number of log files to keep. When the data
log file is full, it is rolled over to <logFilename>1. Files are
rolled up until the number of files specified by this field
exists (ie. <LogFilename>1 becomes <LogFilename>2, etc.).rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.3.4 |
sm6kProgramLogFileBehaviorThis field determines what is done when the maximum
file size is exceeded and the number of log files specified
already exists. If wrap is specified, then the oldest
log file is removed, all other files are rolled up, and
logging continues into a new file.
If nowrap is specified, no more data will be logged
until either the log file name is changed or
the existing files are renamed (or removed).
Flushing refers to whether or not each log entry is
immediately written to the log file or whether the log
data is written out in large chunks containing multiple
log entries. Flushing allows the log file to always contain
the latest log entries. However, CPU time can be saved
if flushing is not activated.rw Enumeration .1.3.6.1.4.1.2.6.12.1.1.3.5 |
sm6kProgramLogMaskThe log mask field is used to indicate the type of
information that is being logged.
The log mask may contain the following literals:
none logs nothing
inform logs informational messages
warning logs warning messages
error logs error messages
base logs Systems Monitor base information
command logs command table information
filter logs filter table information
analysis logs analysis table information
threshold logs threshold table information
polling logs MIB variable polling information
smux logs SMUX interface traffic
binary logs packets sent/received in binary
call logs all internal functions called
all logs all informationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.3.6 |
sm6kProgramDataCollection OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.1.4 |
sm6kProgramDataCollectionFileNameThe data collection filename refers to the file used to
store the data associated with the entries in the threshold
table. The corresponding threshold table entry must have
it's state set to enabledStoreOnly or enabledThresholdStore
in order for data to be collected.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.4.1 |
sm6kProgramDataCollectionFileSizeThis field contains the current size of the collection
file in bytes.ro INTEGER .1.3.6.1.4.1.2.6.12.1.1.4.2 |
sm6kProgramDataCollectionMaxFileSizeMaximum size of the data collection file in kilobytes. The
action taken when the collection file contains this
MaxFileSize Kbytes is determined by the data
collection FileBehavior MIB variable.rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.4.3 |
sm6kProgramDataCollectionNumFilesThis field refers to the number of collection files to keep.
When the data collection file is full, <collFilename> is
rolled up to <collFilename>1 (where <collFilename>
refers to the file defined by the DataCollectionFileName
MIB variable). Files are 'rolled up' until the number
of files specified by this field exists (ie. <collFilename>1
becomes <collFilename>2, etc.).rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.4.4 |
sm6kProgramDataCollectionFileBehaviorThis field determines what is done when the maximum
file size is exceeded AND the number of collection files
specified already exists. If wrap is specified, then
the oldest collection file is removed, all other files are
rolled up, and collection continues into a new file.
If nowrap is specified, no more data will be collected
until either the collection file name is changed
or the existing files are renamed (or removed).
Flushing refers to whether or not each collection entry is
immediately written to the log file or whether the
collection data is written out in large chunks containing
multiple collection entries. Flushing allows the collection
file to always contain the latest collection entries.
However, CPU time can be saved if flushing is not activated.rw Enumeration .1.3.6.1.4.1.2.6.12.1.1.4.5 |
sm6kProgramSetableTestObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.1.5 |
sm6kProgramControlSetableIntegerA settable integer with no function.rw INTEGER .1.3.6.1.4.1.2.6.12.1.1.5.1 |
sm6kProgramControlSetableCounterA settable counter with no function.rw Counter .1.3.6.1.4.1.2.6.12.1.1.5.2 |
sm6kProgramControlSetableGaugeA settable gauge with no function.rw Gauge .1.3.6.1.4.1.2.6.12.1.1.5.3 |
sm6kProgramControlSetableIpAddressA settable IP address with no function.rw IpAddress .1.3.6.1.4.1.2.6.12.1.1.5.4 |
sm6kProgramControlSetableTimeTicksA settable TimeTicks with no function.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.1.1.5.5 |
sm6kProgramControlSetableOctetStringA settable DisplayString with no function.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.1.5.6 |
sm6kResourceUsage OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.2 |
sm6kResourceUsageTableAIX Systems Monitor/6000 resource utilization table. SEQUENCE OF Sm6kResourceUsageEntry .1.3.6.1.4.1.2.6.12.1.2.1 |
sm6kResourceUsageEntryEach entry contains a different resource summary. Sm6kResourceUsageEntry .1.3.6.1.4.1.2.6.12.1.2.1.1 |
sm6kResourceUsageNameSelf, child, and total.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.2.1.1.1 |
sm6kResourceUsageUserTimeAmount of CPU time in user mode since start-up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.1.2.1.1.2 |
sm6kResourceUsageSystemTimeAmount of CPU time in system mode since start-up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.1.2.1.1.3 |
sm6kResourceUsageTotalTimeTotal CPU time for process since start-up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.1.2.1.1.4 |
sm6kResourceUsageMaxrssMaximum resident set size.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.5 |
sm6kResourceUsageIxrssIntegral size (kilobyte-seconds).ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.6 |
sm6kResourceUsageIdrssUnshared resident set size (kilobyte-seconds).ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.7 |
sm6kResourceUsageIsrssUnshared stack set size (kilobyte-seconds).ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.8 |
sm6kResourceUsageMinfltPage faults serviced without I/O activity.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.9 |
sm6kResourceUsageMajfltPage faults serviced with I/O activity.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.10 |
sm6kResourceUsageNSwapNumber of times a process swapped.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.11 |
sm6kResourceUsageInBlockNumber of times a file system performed input.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.12 |
sm6kResourceUsageOutBlockNumber of times a file system performed output.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.13 |
sm6kResourceUsageMsgsndNumber of IPC messages sent.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.14 |
sm6kResourceUsageMsgrcvNumber of IPC messages received.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.15 |
sm6kResourceUsageNSignalsNumber of signals received.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.16 |
sm6kResourceUsageVcswNumber of voluntary context switches.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.17 |
sm6kResourceUsageIcswNumber of involuntary context switches.ro Counter .1.3.6.1.4.1.2.6.12.1.2.1.1.18 |
sm6kProgramMessages OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.1.3 |
sm6kProgramMessagesTableAIX Systems Monitor/6000 information and error
messages. SEQUENCE OF Sm6kProgramMessagesEntry .1.3.6.1.4.1.2.6.12.1.3.1 |
sm6kProgramMessagesEntryEach entry contains a different message summary. Sm6kProgramMessagesEntry .1.3.6.1.4.1.2.6.12.1.3.1.1 |
sm6kProgramMessagesRowNumberTable index - no real meaning.ro INTEGER .1.3.6.1.4.1.2.6.12.1.3.1.1.1 |
sm6kProgramMessagesTimeTime at which the message was generated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.3.1.1.2 |
sm6kProgramMessagesTextText of the message. Truncated after 80 bytesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.1.3.1.1.3 |
sm6kProgramMessagesTimeStampTime (in seconds) at which message was generated.ro INTEGER .1.3.6.1.4.1.2.6.12.1.3.1.1.4 |
sm6kSystemInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2 |
sm6kSystemDescription OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.1 |
sm6kSystemNodeNameNode name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.1.1 |
sm6kSystemSysNameSystem name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.1.2 |
sm6kSystemVersionOperating System version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.1.3 |
sm6kSystemReleaseOperating System release.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.1.4 |
sm6kSystemMachineHardware type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.1.5 |
sm6kSystemConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.2 |
sm6kSystemBufferPoolMarkBuffer Pool High water markro INTEGER .1.3.6.1.4.1.2.6.12.2.2.1 |
sm6kSystemMaxMbufsMax mbufs high-water markro INTEGER .1.3.6.1.4.1.2.6.12.2.2.2 |
sm6kSystemMaxUserProcessesMaximum number of processes per user.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.3 |
sm6kSystemMaxSystemProcessesMaximum number of processes on the system.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.4 |
sm6kSystemRecordLockTableSizeNumber of entries in record lock table.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.5 |
sm6kSystemOpenFileTableSizeMaximum number of entries in open file table.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.6 |
sm6kSystemCBlockArraySizeMaximum number of cblocks in cblock array.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.7 |
sm6kSystemDiskIOHistoryDisk I/O History enabled.ro Enumeration .1.3.6.1.4.1.2.6.12.2.2.8 |
sm6kSystemAutomaticBootAfterHaltAutomatic boot after halt.ro Enumeration .1.3.6.1.4.1.2.6.12.2.2.9 |
sm6kSystemMemScrubMemory scrubbing enabled.ro Enumeration .1.3.6.1.4.1.2.6.12.2.2.10 |
sm6kSystemLeastPrivLeast privilege enablement.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.11 |
sm6kSystemMaxPoutNumber of file pageouts at which waiting occurs.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.12 |
sm6kSystemMinPoutNumber of file pageouts at which ready occurs.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.13 |
sm6kSystemPageSizeSystem page size (from getpagesize())ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.14 |
sm6kSystemProcessMaxOpenFilesMaximum open files per process.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.15 |
sm6kSystemProcessMaxOpenStreamsMaximum open streams per process.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.16 |
sm6kSystemProcessDescriptorTableSizeDescriptor table size for Systems Monitor.ro INTEGER .1.3.6.1.4.1.2.6.12.2.2.17 |
sm6kSystemDevice OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.3 |
sm6kSystemDeviceList OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.3.1 |
sm6kSystemDeviceListInstalledThe number of devices installed.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.1.1 |
sm6kSystemDeviceListTableFile system table. SEQUENCE OF Sm6kSystemDeviceListEntry .1.3.6.1.4.1.2.6.12.2.3.1.2 |
sm6kSystemDeviceListEntryEach entry contains objects for a particular device. Sm6kSystemDeviceListEntry .1.3.6.1.4.1.2.6.12.2.3.1.2.1 |
sm6kSystemDeviceListNameName of device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.1.2.1.1 |
sm6kSystemDeviceListDescriptionLocation of device. Shows status, location and descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.1.2.1.2 |
sm6kSystemDeviceListLocationLocation of device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.1.2.1.3 |
sm6kSystemDeviceListVPDVital Product Data.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.1.2.1.4 |
sm6kSystemDeviceListAttributesDevice Attributes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.1.2.1.5 |
sm6kSystemDeviceListDiagnosticsResults of diagnostic tests.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.1.2.1.6 |
sm6kSystemDeviceTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.3.2 |
sm6kSystemDeviceTokenRingInstalledThe number of devices installed.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.1 |
sm6kSystemDeviceTokenRingTableAdapter table. SEQUENCE OF Sm6kSystemDeviceTokenRingEntry .1.3.6.1.4.1.2.6.12.2.3.2.2 |
sm6kSystemDeviceTokenRingEntryEach entry contains objects for a particular device. Sm6kSystemDeviceTokenRingEntry .1.3.6.1.4.1.2.6.12.2.3.2.2.1 |
sm6kSystemDeviceTokenRingNumberToken ring number.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.1 |
sm6kSystemDeviceTokenRingHardwareAddressBurned-in MAC Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.2 |
sm6kSystemDeviceTokenRingCurrentAddressCurrent MAC Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.3 |
sm6kSystemDeviceTokenRingReceiveDataOffsetReceive data transfer offset.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.4 |
sm6kSystemDeviceTokenRingBroadwrapSupports broadcast wrap of data.ro Enumeration .1.3.6.1.4.1.2.6.12.2.3.2.2.1.5 |
sm6kSystemDeviceTokenRingTxByteMcntMost significant bits of successfully transmitted byte count.ro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.6 |
sm6kSystemDeviceTokenRingTxByteLcntLeast significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.7 |
sm6kSystemDeviceTokenRingRxByteMcntMost significant bits of successfully received byte count.ro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.8 |
sm6kSystemDeviceTokenRingRxByteLcntLeast significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.9 |
sm6kSystemDeviceTokenRingTxFrameMcntMost significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.10 |
sm6kSystemDeviceTokenRingTxFrameLcntLeast significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.11 |
sm6kSystemDeviceTokenRingRxFrameMcntMost significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.12 |
sm6kSystemDeviceTokenRingRxFrameLcntLeast significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.13 |
sm6kSystemDeviceTokenRingTxErrCntFrame transmit error countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.14 |
sm6kSystemDeviceTokenRingRxErrCntFrame receive error countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.15 |
sm6kSystemDeviceTokenRingNidTblHighMaximum netids in usero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.16 |
sm6kSystemDeviceTokenRingTxQueHighMaximum transmits ever queued for adapterro Gauge .1.3.6.1.4.1.2.6.12.2.3.2.2.1.17 |
sm6kSystemDeviceTokenRingRxQueHighMaximum received ever queued for any openro Gauge .1.3.6.1.4.1.2.6.12.2.3.2.2.1.18 |
sm6kSystemDeviceTokenRingStaQueHighMaximum status blocks queued for any openro Gauge .1.3.6.1.4.1.2.6.12.2.3.2.2.1.19 |
sm6kSystemDeviceTokenRingIntrLostInterrupts lostro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.20 |
sm6kSystemDeviceTokenRingWdtLostWdt Interrupts lostro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.21 |
sm6kSystemDeviceTokenRingTimoLostTimeout Interrupts lostro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.22 |
sm6kSystemDeviceTokenRingStaQueOverflowStatus lost due to queue overflowro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.23 |
sm6kSystemDeviceTokenRingRxQueOverflowPacket lost due to queue overflowro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.24 |
sm6kSystemDeviceTokenRingRxQueNoMbufPacket lost due to no mbufsro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.25 |
sm6kSystemDeviceTokenRingRxQueNoMbufExtPacket lost due to no mbuf extensionsro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.26 |
sm6kSystemDeviceTokenRingTxIntrCntTransmit interrupt countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.27 |
sm6kSystemDeviceTokenRingRxIntrCntReceive interrupt countro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.28 |
sm6kSystemDeviceTokenRingPktRejCntPackets rejected no NETIDro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.29 |
sm6kSystemDeviceTokenRingPktAccCntPackets accepted - valid NETIDro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.30 |
sm6kSystemDeviceTokenRingPktTxCntPacket transmit counterro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.31 |
sm6kSystemDeviceTokenRingOvfloPktCntOverflow packets receivedro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.32 |
sm6kSystemDeviceTokenRingPktTxErrCntPacket transmission errors detected by adapterro Counter .1.3.6.1.4.1.2.6.12.2.3.2.2.1.33 |
sm6kSystemDeviceTokenRingSpeedRing speed, megabits/secondro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.34 |
sm6kSystemDeviceTokenRingVPDVital Product Data from adapterro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.35 |
sm6kSystemDeviceTokenRingAdapPhysAddrAdapter Physical Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.36 |
sm6kSystemDeviceTokenRingUpstreamNodeAddrUpstream node addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.37 |
sm6kSystemDeviceTokenRingUpstreamPhysAddrUpstream Physical Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.38 |
sm6kSystemDeviceTokenRingLastPollAddrLast Poll addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.39 |
sm6kSystemDeviceTokenRingAuthorEnvAuthorized environmentro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.40 |
sm6kSystemDeviceTokenRingTxAccessPriorityTransmit priorityro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.41 |
sm6kSystemDeviceTokenRingSrcClassAuthorSource class authorizationro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.42 |
sm6kSystemDeviceTokenRingLastAttenCodeLast attention codero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.43 |
sm6kSystemDeviceTokenRingLastSrcAddrLast source addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.44 |
sm6kSystemDeviceTokenRingLastBeaconTypeLast beacon typero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.45 |
sm6kSystemDeviceTokenRingLastMajorVectorLast major vectorro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.46 |
sm6kSystemDeviceTokenRingRingStatusRing status - see /usr/include/sys/tokuser.hro INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.47 |
sm6kSystemDeviceTokenRingSoftErrorTimerValSoft Error timer valuero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.48 |
sm6kSystemDeviceTokenRingFrontEndTimerValFront end timer valuero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.49 |
sm6kSystemDeviceTokenRingMonitorErrorCodeMonitor error codero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.50 |
sm6kSystemDeviceTokenRingBeaconTxTypeBeacon transmit typero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.51 |
sm6kSystemDeviceTokenRingBeaconRxTypeBeacon Receive typero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.52 |
sm6kSystemDeviceTokenRingFrameCorrSaveFrame Correlator savero INTEGER .1.3.6.1.4.1.2.6.12.2.3.2.2.1.53 |
sm6kSystemDeviceTokenRingBeaconStationNAUNBeaconing station NAUNro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.54 |
sm6kSystemDeviceTokenRingBeaconStationPhysAddrBeaconing station physical addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.2.2.1.55 |
sm6kSystemDeviceTokenRingClearSet to clear to clear clearable statisticsrw Enumeration .1.3.6.1.4.1.2.6.12.2.3.2.2.1.56 |
sm6kSystemDeviceEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.3.3 |
sm6kSystemDeviceEthernetInstalledThe number of devices installed.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.3.1 |
sm6kSystemDeviceEthernetTableAdapter table. SEQUENCE OF Sm6kSystemDeviceEthernetEntry .1.3.6.1.4.1.2.6.12.2.3.3.2 |
sm6kSystemDeviceEthernetEntryEach entry contains objects for a particular device Sm6kSystemDeviceEthernetEntry .1.3.6.1.4.1.2.6.12.2.3.3.2.1 |
sm6kSystemDeviceEthernetNumberAdapter numberro INTEGER .1.3.6.1.4.1.2.6.12.2.3.3.2.1.1 |
sm6kSystemDeviceEthernetHardwareAddressBurned-in MAC Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.3.2.1.2 |
sm6kSystemDeviceEthernetCurrentAddressCurrent MAC Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.3.2.1.3 |
sm6kSystemDeviceEthernetReceiveDataOffsetReceive Data transfer Offsetro INTEGER .1.3.6.1.4.1.2.6.12.2.3.3.2.1.4 |
sm6kSystemDeviceEthernetBroadwrapSupports broadcast wrap of data.ro Enumeration .1.3.6.1.4.1.2.6.12.2.3.3.2.1.5 |
sm6kSystemDeviceEthernetTxByteMcntMost significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.6 |
sm6kSystemDeviceEthernetTxByteLcntLeast significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.7 |
sm6kSystemDeviceEthernetRxByteMcntMost significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.8 |
sm6kSystemDeviceEthernetRxByteLcntLeast significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.9 |
sm6kSystemDeviceEthernetTxFrameMcntMost significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.10 |
sm6kSystemDeviceEthernetTxFrameLcntLeast significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.11 |
sm6kSystemDeviceEthernetRxFrameMcntMost significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.12 |
sm6kSystemDeviceEthernetRxFrameLcntLeast significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.13 |
sm6kSystemDeviceEthernetTxErrCntFrame transmit error countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.14 |
sm6kSystemDeviceEthernetRxErrCntFrame receive error countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.15 |
sm6kSystemDeviceEthernetNidTblHighMaximum netids in usero INTEGER .1.3.6.1.4.1.2.6.12.2.3.3.2.1.16 |
sm6kSystemDeviceEthernetTxQueHighMaximum transmits ever queued for adapterro Gauge .1.3.6.1.4.1.2.6.12.2.3.3.2.1.17 |
sm6kSystemDeviceEthernetRxQueHighMaximum received ever queued for any openro Gauge .1.3.6.1.4.1.2.6.12.2.3.3.2.1.18 |
sm6kSystemDeviceEthernetStaQueHighMaximum status blocks queued for any openro Gauge .1.3.6.1.4.1.2.6.12.2.3.3.2.1.19 |
sm6kSystemDeviceEthernetIntrLostInterrupts lostro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.20 |
sm6kSystemDeviceEthernetWdtLostWdt Interrupts lostro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.21 |
sm6kSystemDeviceEthernetTimoLostTimeout Interrupts lostro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.22 |
sm6kSystemDeviceEthernetStaQueOverflowStatus lost due to queue overflowro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.23 |
sm6kSystemDeviceEthernetRxQueOverflowPacket lost due to queue overflowro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.24 |
sm6kSystemDeviceEthernetRxQueNoMbufPacket lost due to no mbufsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.25 |
sm6kSystemDeviceEthernetRxQueNoMbufExtPacket lost due to no mbuf extensionsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.26 |
sm6kSystemDeviceEthernetTxIntrCntTransmit interrupt countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.27 |
sm6kSystemDeviceEthernetRxIntrCntReceive interrupt countro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.28 |
sm6kSystemDeviceEthernetCRCErrCRC Errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.29 |
sm6kSystemDeviceEthernetAlignErrAlignment Errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.30 |
sm6kSystemDeviceEthernetOverrunOverrun Errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.31 |
sm6kSystemDeviceEthernetTooShortToo short Errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.32 |
sm6kSystemDeviceEthernetTooLongToo long Errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.33 |
sm6kSystemDeviceEthernetNoResourcesOut of resource errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.34 |
sm6kSystemDeviceEthernetPktDiscardPackets discardedro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.35 |
sm6kSystemDeviceEthernetMaxCollisionMaximum collisionsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.36 |
sm6kSystemDeviceEthernetLateCollisionCollisions after slot time elapsedro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.37 |
sm6kSystemDeviceEthernetCarrierLostCarrier lost errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.38 |
sm6kSystemDeviceEthernetUnderrunUnderrun errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.39 |
sm6kSystemDeviceEthernetCTSLostClear to send lost errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.40 |
sm6kSystemDeviceEthernetTxTimeoutsTransmit Timeoutsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.41 |
sm6kSystemDeviceEthernetParErrCntParity errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.42 |
sm6kSystemDeviceEthernetDiagOverflowDiagnostic overflowro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.43 |
sm6kSystemDeviceEthernetExecOverflowExecute queue overflowsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.44 |
sm6kSystemDeviceEthernetExecCmdErrorsExecute command errorsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.45 |
sm6kSystemDeviceEthernetHostRecEolHost received end of listro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.46 |
sm6kSystemDeviceEthernetAdptRecEolAdapter received end of listro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.47 |
sm6kSystemDeviceEthernetHostRecPktPackets host actually received from adapterro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.48 |
sm6kSystemDeviceEthernetAdptRecPktPackets to be delivered to hostro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.49 |
sm6kSystemDeviceEthernetStartRxCmdStart receptions commands issued to adapterro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.50 |
sm6kSystemDeviceEthernetStartRxDmaTimeoutsDMA timeoutsro Counter .1.3.6.1.4.1.2.6.12.2.3.3.2.1.51 |
sm6kSystemDeviceEthernetVPDVital Product Data from adapterro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.3.2.1.52 |
sm6kSystemDeviceEthernetClearSet to clear to clear clearable statisticsrw Enumeration .1.3.6.1.4.1.2.6.12.2.3.3.2.1.53 |
sm6kSystemDeviceX25 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.3.4 |
sm6kSystemDeviceX25InstalledThe number of devices installed.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.1 |
sm6kSystemDeviceX25TableAdapter table. SEQUENCE OF Sm6kSystemDeviceX25Entry .1.3.6.1.4.1.2.6.12.2.3.4.2 |
sm6kSystemDeviceX25EntryEach entry contains objects for a particular device Sm6kSystemDeviceX25Entry .1.3.6.1.4.1.2.6.12.2.3.4.2.1 |
sm6kSystemDeviceX25Numbersm6kSystemDeviceX25Numberro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.1 |
sm6kSystemDeviceX25Addresssm6kSystemDeviceX25Addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.2.1.2 |
sm6kSystemDeviceX25SupportLevelsm6kSystemDeviceX25SupportLevelro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.3 |
sm6kSystemDeviceX25SupportedFacilitiessm6kSystemDeviceX25SupportedFacilitiesro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.4 |
sm6kSystemDeviceX25NetworkIdsm6kSystemDeviceX25NetworkIdro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.2.1.5 |
sm6kSystemDeviceX25MaxTxPacketSizesm6kSystemDeviceX25MaxTxPacketSizero INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.6 |
sm6kSystemDeviceX25MaxRxPacketSizesm6kSystemDeviceX25MaxRxPacketSizero INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.7 |
sm6kSystemDeviceX25DefaultSvcTxPacketSizesm6kSystemDeviceX25DefaultSvcTxPacketSizero INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.8 |
sm6kSystemDeviceX25DefaultSvcRxPacketSizesm6kSystemDeviceX25DefaultSvcRxPacketSizero INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.9 |
sm6kSystemDeviceX25ReceiveDataTransferOffsetsm6kSystemDeviceX25ReceiveDataTransferOffsetro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.10 |
sm6kSystemDeviceX25MemoryWindowSizesm6kSystemDeviceX25MemoryWindowSizero INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.11 |
sm6kSystemDeviceX25TxByteMcntMost significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.12 |
sm6kSystemDeviceX25TxByteLcntLeast significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.13 |
sm6kSystemDeviceX25RxByteMcntMost significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.14 |
sm6kSystemDeviceX25RxByteLcntLeast significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.15 |
sm6kSystemDeviceX25TxFrameMcntMost significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.16 |
sm6kSystemDeviceX25TxFrameLcntLeast significant bits of successfully transmitted byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.17 |
sm6kSystemDeviceX25RxFrameMcntMost significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.18 |
sm6kSystemDeviceX25RxFrameLcntLeast significant bits of successfully received byte countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.19 |
sm6kSystemDeviceX25TxErrCntFrame transmit error countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.20 |
sm6kSystemDeviceX25RxErrCntFrame receive error countro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.21 |
sm6kSystemDeviceX25NidTblHighMaximum netids in usero INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.2.1.22 |
sm6kSystemDeviceX25TxQueHighMaximum transmits ever queued for adapterro Gauge .1.3.6.1.4.1.2.6.12.2.3.4.2.1.23 |
sm6kSystemDeviceX25RxQueHighMaximum received ever queued for any openro Gauge .1.3.6.1.4.1.2.6.12.2.3.4.2.1.24 |
sm6kSystemDeviceX25StaQueHighMaximum status blocks queued for any openro Gauge .1.3.6.1.4.1.2.6.12.2.3.4.2.1.25 |
sm6kSystemDeviceX25IgnoredFTxsm6kSystemDeviceX25IgnoredFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.26 |
sm6kSystemDeviceX25RrFTxsm6kSystemDeviceX25RrFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.27 |
sm6kSystemDeviceX25RnrFTxsm6kSystemDeviceX25RnrFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.28 |
sm6kSystemDeviceX25RejFTxsm6kSystemDeviceX25RejFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.29 |
sm6kSystemDeviceX25InfoFTxsm6kSystemDeviceX25InfoFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.30 |
sm6kSystemDeviceX25SabmFTxsm6kSystemDeviceX25SabmFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.31 |
sm6kSystemDeviceX25SarmDmFTxsm6kSystemDeviceX25SarmDmFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.32 |
sm6kSystemDeviceX25DiscFTxsm6kSystemDeviceX25DiscFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.33 |
sm6kSystemDeviceX25UaFTxsm6kSystemDeviceX25UaFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.34 |
sm6kSystemDeviceX25FrmrFTxsm6kSystemDeviceX25FrmrFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.35 |
sm6kSystemDeviceX25BadNrFTxsm6kSystemDeviceX25BadNrFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.36 |
sm6kSystemDeviceX25UnknownFTxsm6kSystemDeviceX25UnknownFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.37 |
sm6kSystemDeviceX25XidFTxsm6kSystemDeviceX25XidFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.38 |
sm6kSystemDeviceX25BadLengthFTxsm6kSystemDeviceX25BadLengthFTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.39 |
sm6kSystemDeviceX25T1Expirationssm6kSystemDeviceX25T1Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.40 |
sm6kSystemDeviceX25Lvl2Connectssm6kSystemDeviceX25Lvl2Connectsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.41 |
sm6kSystemDeviceX25Lvl2Disconnectssm6kSystemDeviceX25Lvl2Disconnectsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.42 |
sm6kSystemDeviceX25CarrierLosssm6kSystemDeviceX25CarrierLossro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.43 |
sm6kSystemDeviceX25ConnectTimesm6kSystemDeviceX25ConnectTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.3.4.2.1.44 |
sm6kSystemDeviceX25T4Expirationssm6kSystemDeviceX25T4Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.45 |
sm6kSystemDeviceX25T4N2Timessm6kSystemDeviceX25T4N2Timesro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.46 |
sm6kSystemDeviceX25IgnoredFRxsm6kSystemDeviceX25IgnoredFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.47 |
sm6kSystemDeviceX25RrFRxsm6kSystemDeviceX25RrFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.48 |
sm6kSystemDeviceX25RnrFRxsm6kSystemDeviceX25RnrFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.49 |
sm6kSystemDeviceX25RejFRxsm6kSystemDeviceX25RejFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.50 |
sm6kSystemDeviceX25InfoFRxsm6kSystemDeviceX25InfoFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.51 |
sm6kSystemDeviceX25SabmFRxsm6kSystemDeviceX25SabmFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.52 |
sm6kSystemDeviceX25SarmDmFRxsm6kSystemDeviceX25SarmDmFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.53 |
sm6kSystemDeviceX25DiscFRxsm6kSystemDeviceX25DiscFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.54 |
sm6kSystemDeviceX25UaFRxsm6kSystemDeviceX25UaFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.55 |
sm6kSystemDeviceX25FrmrFRxsm6kSystemDeviceX25FrmrFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.56 |
sm6kSystemDeviceX25BadNrFRxsm6kSystemDeviceX25BadNrFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.57 |
sm6kSystemDeviceX25UnknownFRxsm6kSystemDeviceX25UnknownFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.58 |
sm6kSystemDeviceX25XidFRxsm6kSystemDeviceX25XidFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.59 |
sm6kSystemDeviceX25BadLengthFRxsm6kSystemDeviceX25BadLengthFRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.60 |
sm6kSystemDeviceX25DataPTxsm6kSystemDeviceX25DataPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.61 |
sm6kSystemDeviceX25RrPTxsm6kSystemDeviceX25RrPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.62 |
sm6kSystemDeviceX25RnrPTxsm6kSystemDeviceX25RnrPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.63 |
sm6kSystemDeviceX25InterruptPTxsm6kSystemDeviceX25InterruptPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.64 |
sm6kSystemDeviceX25InterruptConfirmPTxsm6kSystemDeviceX25InterruptConfirmPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.65 |
sm6kSystemDeviceX25CallRequestPTxsm6kSystemDeviceX25CallRequestPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.66 |
sm6kSystemDeviceX25CallAcceptPTxsm6kSystemDeviceX25CallAcceptPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.67 |
sm6kSystemDeviceX25ClearRequestPTxsm6kSystemDeviceX25ClearRequestPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.68 |
sm6kSystemDeviceX25ClearConfirmPTxsm6kSystemDeviceX25ClearConfirmPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.69 |
sm6kSystemDeviceX25ResetRequestPTxsm6kSystemDeviceX25ResetRequestPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.70 |
sm6kSystemDeviceX25ResetConfirmPTxsm6kSystemDeviceX25ResetConfirmPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.71 |
sm6kSystemDeviceX25DiagnosticPTxsm6kSystemDeviceX25DiagnosticPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.72 |
sm6kSystemDeviceX25RegistrationPTxsm6kSystemDeviceX25RegistrationPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.73 |
sm6kSystemDeviceX25RegistrationConfirmPTxsm6kSystemDeviceX25RegistrationConfirmPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.74 |
sm6kSystemDeviceX25RestartPTxsm6kSystemDeviceX25RestartPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.75 |
sm6kSystemDeviceX25RestartConfirmPTxsm6kSystemDeviceX25RestartConfirmPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.76 |
sm6kSystemDeviceX25ErrorPTxsm6kSystemDeviceX25ErrorPTxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.77 |
sm6kSystemDeviceX25T20Expirationssm6kSystemDeviceX25T20Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.78 |
sm6kSystemDeviceX25T21Expirationssm6kSystemDeviceX25T21Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.79 |
sm6kSystemDeviceX25T22Expirationssm6kSystemDeviceX25T22Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.80 |
sm6kSystemDeviceX25T23Expirationssm6kSystemDeviceX25T23Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.81 |
sm6kSystemDeviceX25VcEstablishmentssm6kSystemDeviceX25VcEstablishmentsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.82 |
sm6kSystemDeviceX25T24Expirationssm6kSystemDeviceX25T24Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.83 |
sm6kSystemDeviceX25T25Expirationssm6kSystemDeviceX25T25Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.84 |
sm6kSystemDeviceX25T26Expirationssm6kSystemDeviceX25T26Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.85 |
sm6kSystemDeviceX25T28Expirationssm6kSystemDeviceX25T28Expirationsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.86 |
sm6kSystemDeviceX25DataPRxsm6kSystemDeviceX25DataPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.87 |
sm6kSystemDeviceX25RrPRxsm6kSystemDeviceX25RrPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.88 |
sm6kSystemDeviceX25RnrPRxsm6kSystemDeviceX25RnrPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.89 |
sm6kSystemDeviceX25InterruptPRxsm6kSystemDeviceX25InterruptPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.90 |
sm6kSystemDeviceX25InterruptConfirmPRxsm6kSystemDeviceX25InterruptConfirmPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.91 |
sm6kSystemDeviceX25IncomingCallPRxsm6kSystemDeviceX25IncomingCallPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.92 |
sm6kSystemDeviceX25CallConnectedPRxsm6kSystemDeviceX25CallConnectedPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.93 |
sm6kSystemDeviceX25ClearIndicationPRxsm6kSystemDeviceX25ClearIndicationPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.94 |
sm6kSystemDeviceX25ClearConfirmPRxsm6kSystemDeviceX25ClearConfirmPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.95 |
sm6kSystemDeviceX25ResetIndicationPRxsm6kSystemDeviceX25ResetIndicationPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.96 |
sm6kSystemDeviceX25ResetConfirmPRxsm6kSystemDeviceX25ResetConfirmPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.97 |
sm6kSystemDeviceX25DiagnosticPRxsm6kSystemDeviceX25DiagnosticPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.98 |
sm6kSystemDeviceX25RegistrationPRxsm6kSystemDeviceX25RegistrationPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.99 |
sm6kSystemDeviceX25RegistrationConfirmPRxsm6kSystemDeviceX25RegistrationConfirmPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.100 |
sm6kSystemDeviceX25RestartPRxsm6kSystemDeviceX25RestartPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.101 |
sm6kSystemDeviceX25RestartConfirmPRxsm6kSystemDeviceX25RestartConfirmPRxro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.102 |
sm6kSystemDeviceX25TxUnknownSizesm6kSystemDeviceX25TxUnknownSizero Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.103 |
sm6kSystemDeviceX25TxReserved1sm6kSystemDeviceX25TxReserved1ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.104 |
sm6kSystemDeviceX25TxReserved2sm6kSystemDeviceX25TxReserved2ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.105 |
sm6kSystemDeviceX25TxReserved3sm6kSystemDeviceX25TxReserved3ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.106 |
sm6kSystemDeviceX25Tx0x15sm6kSystemDeviceX25Tx0x15ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.107 |
sm6kSystemDeviceX25Tx16x31sm6kSystemDeviceX25Tx16x31ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.108 |
sm6kSystemDeviceX25Tx32x63sm6kSystemDeviceX25Tx32x63ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.109 |
sm6kSystemDeviceX25Tx64x127sm6kSystemDeviceX25Tx64x127ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.110 |
sm6kSystemDeviceX25Tx128x255sm6kSystemDeviceX25Tx128x255ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.111 |
sm6kSystemDeviceX25Tx256x511sm6kSystemDeviceX25Tx256x511ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.112 |
sm6kSystemDeviceX25Tx512x1023sm6kSystemDeviceX25Tx512x1023ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.113 |
sm6kSystemDeviceX25Tx1024x2047sm6kSystemDeviceX25Tx1024x2047ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.114 |
sm6kSystemDeviceX25Tx2048x4095sm6kSystemDeviceX25Tx2048x4095ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.115 |
sm6kSystemDeviceX25TxReserved13sm6kSystemDeviceX25TxReserved13ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.116 |
sm6kSystemDeviceX25TxReserved14sm6kSystemDeviceX25TxReserved14ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.117 |
sm6kSystemDeviceX25TxReserved15sm6kSystemDeviceX25TxReserved15ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.118 |
sm6kSystemDeviceX25TxTotalPacketssm6kSystemDeviceX25TxTotalPacketsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.119 |
sm6kSystemDeviceX25RxUnknownSizesm6kSystemDeviceX25RxUnknownSizero Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.120 |
sm6kSystemDeviceX25RxReserved1sm6kSystemDeviceX25RxReserved1ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.121 |
sm6kSystemDeviceX25RxReserved2sm6kSystemDeviceX25RxReserved2ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.122 |
sm6kSystemDeviceX25RxReserved3sm6kSystemDeviceX25RxReserved3ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.123 |
sm6kSystemDeviceX25Rx0x15sm6kSystemDeviceX25Rx0x15ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.124 |
sm6kSystemDeviceX25Rx16x31sm6kSystemDeviceX25Rx16x31ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.125 |
sm6kSystemDeviceX25Rx32x63sm6kSystemDeviceX25Rx32x63ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.126 |
sm6kSystemDeviceX25Rx64x127sm6kSystemDeviceX25Rx64x127ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.127 |
sm6kSystemDeviceX25Rx128x255sm6kSystemDeviceX25Rx128x255ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.128 |
sm6kSystemDeviceX25Rx256x511sm6kSystemDeviceX25Rx256x511ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.129 |
sm6kSystemDeviceX25Rx512x1023sm6kSystemDeviceX25Rx512x1023ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.130 |
sm6kSystemDeviceX25Rx1024x2047sm6kSystemDeviceX25Rx1024x2047ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.131 |
sm6kSystemDeviceX25Rx2048x4095sm6kSystemDeviceX25Rx2048x4095ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.132 |
sm6kSystemDeviceX25RxReserved13sm6kSystemDeviceX25RxReserved13ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.133 |
sm6kSystemDeviceX25RxReserved14sm6kSystemDeviceX25RxReserved14ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.134 |
sm6kSystemDeviceX25RxReserved15sm6kSystemDeviceX25RxReserved15ro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.135 |
sm6kSystemDeviceX25RxTotalPacketssm6kSystemDeviceX25RxTotalPacketsro Counter .1.3.6.1.4.1.2.6.12.2.3.4.2.1.136 |
sm6kSystemDeviceX25ClearSet to clear to clear clearable statisticsrw Enumeration .1.3.6.1.4.1.2.6.12.2.3.4.2.1.137 |
sm6kSystemDeviceX25RouteCountThe number of devices installed.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.3 |
sm6kSystemDeviceX25RouteTableRouting information SEQUENCE OF Sm6kSystemDeviceX25RouteEntry .1.3.6.1.4.1.2.6.12.2.3.4.4 |
sm6kSystemDeviceX25RouteEntryEach entry contains objects for a particular route. Sm6kSystemDeviceX25RouteEntry .1.3.6.1.4.1.2.6.12.2.3.4.4.1 |
sm6kSystemDeviceX25RouteNumberRoute Entry number.ro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.4.1.1 |
sm6kSystemDeviceX25RouteEntryNameRoute name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.2 |
sm6kSystemDeviceX25RouteUserNameUser name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.3 |
sm6kSystemDeviceX25RoutePortPortro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.4 |
sm6kSystemDeviceX25RouteCallingAddressCalling addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.5 |
sm6kSystemDeviceX25RouteCalledSubaddressCalled subaddressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.6 |
sm6kSystemDeviceX25RouteCallingAddressExtCalling address extensionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.7 |
sm6kSystemDeviceX25RouteCalledAddressExtCalled address extensionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.8 |
sm6kSystemDeviceX25RouteCalledUserDataCalled address extensionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.3.4.4.1.9 |
sm6kSystemDeviceX25RoutePriorityPriorityro INTEGER .1.3.6.1.4.1.2.6.12.2.3.4.4.1.10 |
sm6kSystemDeviceX25RouteActionAction taken when no listening application is runningro Enumeration .1.3.6.1.4.1.2.6.12.2.3.4.4.1.11 |
sm6kSystemPagingInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.4 |
sm6kSystemFreePagingSpaceFree paging space in system in kilobytes -
returned by psdanger (-1).ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.1 |
sm6kSystemFreePagingSpaceUntilKillFree paging space until kill threshold in kilobytes -
returned by psdanger (SIGKILL).ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.2 |
sm6kSystemFreePagingSpaceUntilKillPercentPercent of kill threshold to free space.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.3 |
sm6kSystemPagingSpace OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.4.4 |
sm6kSystemPagingSpaceCountThe number of paging spaces.ro Gauge .1.3.6.1.4.1.2.6.12.2.4.4.1 |
sm6kSystemPagingSpaceTablePaging space table. SEQUENCE OF Sm6kSystemPagingSpaceEntry .1.3.6.1.4.1.2.6.12.2.4.4.2 |
sm6kSystemPagingSpaceEntryEach entry contains objects for a particular paging
space. - same information as lsps -a Sm6kSystemPagingSpaceEntry .1.3.6.1.4.1.2.6.12.2.4.4.2.1 |
sm6kSystemPagingSpaceNamePaging space name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.4.4.2.1.1 |
sm6kSystemPagingSpacePhysicalVolumePhysical volume on which paging space resides.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.4.4.2.1.2 |
sm6kSystemPagingSpaceVolumeGroupVolume group of paging space.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.4.4.2.1.3 |
sm6kSystemPagingSpaceSizeSize in megabytes.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.4.2.1.4 |
sm6kSystemPagingSpacePercentUsedPercent used.ro Gauge .1.3.6.1.4.1.2.6.12.2.4.4.2.1.5 |
sm6kSystemPagingSpaceActiveActive indicator
::= { sm6kSystemPagingSpaceEntry 6}
sm6kSystemPagingSpaceAuto OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTIONro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.4.4.2.1.7 |
sm6kSystemPagingSpaceTypePaging space type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.4.4.2.1.8 |
sm6kSystemPagingStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.4.5 |
sm6kSystemPagingStatisticsPollingIntervalPolling interval for paging statistics data.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.1 |
sm6kSystemPagingStatisticsTableInput/Output statistics table. SEQUENCE OF Sm6kSystemPagingStatisticsEntry .1.3.6.1.4.1.2.6.12.2.4.5.2 |
sm6kSystemPagingStatisticsEntryEach instance contains paging statistics over a
different interval. - same information as vmstat Sm6kSystemPagingStatisticsEntry .1.3.6.1.4.1.2.6.12.2.4.5.2.1 |
sm6kSystemPagingStatisticsNameDescription of interval.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.4.5.2.1.1 |
sm6kSystemPagingStatisticsIntervalStartTimeStart time of interval.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.4.5.2.1.2 |
sm6kSystemPagingStatisticsIntervalLengthLength of interval during which paging statistics are
computed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.4.5.2.1.3 |
sm6kSystemPagingStatisticsPageFaultsTotal number of page faults over the interval.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.4 |
sm6kSystemPagingStatisticsPageReclaimsTotal number of page reclaims over the interval.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.5 |
sm6kSystemPagingStatisticsPagesPagedInTotal number of Pages Paged In over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.6 |
sm6kSystemPagingStatisticsPagesPagedOutTotal number of Pages Paged Out over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.7 |
sm6kSystemPagingStatisticsPageInsFromPagingSpaceTotal number of Page Ins From Paging Spacero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.8 |
sm6kSystemPagingStatisticsPageOutsFromPagingSpaceTotal number of Page Outs From Paging Spacero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.9 |
sm6kSystemPagingStatisticsStartIOsTotal number of IO Startsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.10 |
sm6kSystemPagingStatisticsDoneIOsTotal number of IOs Donero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.11 |
sm6kSystemPagingStatisticsPageScansTotal number of page scansro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.12 |
sm6kSystemPagingStatisticsScanClockCyclesTotal page scan clock cyclesro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.13 |
sm6kSystemPagingStatisticsPageStealsTotal number of page stealsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.14 |
sm6kSystemPagingStatisticsFreeFrameWaitsTotal number of free frame waitsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.15 |
sm6kSystemPagingStatisticsExtendXPTWaitsTotal number of extend XPT waits.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.16 |
sm6kSystemPagingStatisticsPendingIOWaitsTotal number of Pending I/O waitsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.17 |
sm6kSystemPagingStatisticsPageFaultsMinimumMinimum page faultsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.18 |
sm6kSystemPagingStatisticsPageReclaimsMinimumMinimum page reclaimsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.19 |
sm6kSystemPagingStatisticsPagesPagedInMinimumMinimum pages paged inro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.20 |
sm6kSystemPagingStatisticsPagesPagedOutMinimumMinimum pages paged outro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.21 |
sm6kSystemPagingStatisticsPageInsFromPagingSpaceMinimumMinimum Page Ins From Paging Spacero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.22 |
sm6kSystemPagingStatisticsPageOutsFromPagingSpaceMinimumMinimum Page Outs From Paging Spacero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.23 |
sm6kSystemPagingStatisticsStartIOsMinimumMinimum IO Startsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.24 |
sm6kSystemPagingStatisticsDoneIOsMinimumMinimum IOs Donero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.25 |
sm6kSystemPagingStatisticsPageScansMinimumMinimum number of page scansro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.26 |
sm6kSystemPagingStatisticsScanClockCyclesMinimumMinimum page scan clock cyclesro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.27 |
sm6kSystemPagingStatisticsPageStealsMinimumMinimum page stealsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.28 |
sm6kSystemPagingStatisticsFreeFrameWaitsMinimumMinimum free frame waitsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.29 |
sm6kSystemPagingStatisticsExtendXPTWaitsMinimumMinimum Extend XPT waits.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.30 |
sm6kSystemPagingStatisticsPendingIOWaitsMinimumMinimum Pending I/O waitsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.31 |
sm6kSystemPagingStatisticsPageFaultsMaximumMaximum page faultsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.32 |
sm6kSystemPagingStatisticsPageReclaimsMaximumMaximum page reclaimsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.33 |
sm6kSystemPagingStatisticsPagesPagedInMaximumMaximum Pages Paged Inro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.34 |
sm6kSystemPagingStatisticsPagesPagedOutMaximumMaximum Pages Paged Outro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.35 |
sm6kSystemPagingStatisticsPageInsFromPagingSpaceMaximumMaximum Page Ins From Paging Spacero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.36 |
sm6kSystemPagingStatisticsPageOutsFromPagingSpaceMaximumMaximum Page Outs From Paging Spacero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.37 |
sm6kSystemPagingStatisticsStartIOsMaximumMaximum IO Startsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.38 |
sm6kSystemPagingStatisticsDoneIOsMaximumMaximum IOs Donero INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.39 |
sm6kSystemPagingStatisticsPageScansMaximumMaximum number of page scansro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.40 |
sm6kSystemPagingStatisticsScanClockCyclesMaximumMaximum page scan clock cyclesro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.41 |
sm6kSystemPagingStatisticsPageStealsMaximumMaximum page stealsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.42 |
sm6kSystemPagingStatisticsFreeFrameWaitsMaximumMaximum free frame waitsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.43 |
sm6kSystemPagingStatisticsExtendXPTWaitsMaximumMaximum Extend XPT waits.ro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.44 |
sm6kSystemPagingStatisticsPendingIOWaitsMaximumMaximum Pending I/O waitsro INTEGER .1.3.6.1.4.1.2.6.12.2.4.5.2.1.45 |
sm6kSystemFileSystem OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.5 |
sm6kSystemFileSystemMountedThe number of file systems mounted.ro Gauge .1.3.6.1.4.1.2.6.12.2.5.1 |
sm6kSystemFileSystemTableFile system table. SEQUENCE OF Sm6kSystemFileSystemEntry .1.3.6.1.4.1.2.6.12.2.5.2 |
sm6kSystemFileSystemEntryEach entry contains objects for a particular file
system. Sm6kSystemFileSystemEntry .1.3.6.1.4.1.2.6.12.2.5.2.1 |
sm6kSystemFileSystemNameName of mount point for a file system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.5.2.1.1 |
sm6kSystemFileSystemSizeTotal kilobytes in file system.ro Gauge .1.3.6.1.4.1.2.6.12.2.5.2.1.2 |
sm6kSystemFileSystemFreeFree file system space in kilobytes.ro Gauge .1.3.6.1.4.1.2.6.12.2.5.2.1.3 |
sm6kSystemFileSystemPercentUsedPercent of file system used.ro Gauge .1.3.6.1.4.1.2.6.12.2.5.2.1.4 |
sm6kSystemFileSystemInodesUsedUsed inodes in file system.ro Gauge .1.3.6.1.4.1.2.6.12.2.5.2.1.5 |
sm6kSystemFileSystemInodesPercentUsedPercent of file system used.ro Gauge .1.3.6.1.4.1.2.6.12.2.5.2.1.6 |
sm6kSystemFileSystemInodeCountPercent of file system used.ro Gauge .1.3.6.1.4.1.2.6.12.2.5.2.1.7 |
sm6kSystemFileSystemFileSystemNFS File system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.5.2.1.8 |
sm6kSystemFileSystemRemoteRemote node for remotely mounted filesystems.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.5.2.1.9 |
sm6kSystemSubSystems OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.6 |
sm6kSystemSubSystemsCountThe number of subsystems in table.ro Gauge .1.3.6.1.4.1.2.6.12.2.6.1 |
sm6kSystemSubSystemsTableSubsystems table. SEQUENCE OF Sm6kSystemSubSystemsEntry .1.3.6.1.4.1.2.6.12.2.6.2 |
sm6kSystemSubSystemsEntryEach entry contains objects for a particular file
system. Sm6kSystemSubSystemsEntry .1.3.6.1.4.1.2.6.12.2.6.2.1 |
sm6kSystemSubSystemsNameName of sub system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.6.2.1.1 |
sm6kSystemSubSystemsPIDPID of subsystem, if active.ro INTEGER .1.3.6.1.4.1.2.6.12.2.6.2.1.2 |
sm6kSystemSubSystemsStatusDescriptionProcess groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.6.2.1.3 |
sm6kSystemSubSystemsStatusTextStatus textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.6.2.1.4 |
sm6kSystemSubSystemsStatusCodeInteger status codero INTEGER .1.3.6.1.4.1.2.6.12.2.6.2.1.5 |
sm6kSystemProcess OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.7 |
sm6kSystemProcessCountThe number of processes in table.ro Gauge .1.3.6.1.4.1.2.6.12.2.7.1 |
sm6kSystemProcessTableProcess table. SEQUENCE OF Sm6kSystemProcessEntry .1.3.6.1.4.1.2.6.12.2.7.2 |
sm6kSystemProcessEntryEach entry contains objects for a particular file
system. Sm6kSystemProcessEntry .1.3.6.1.4.1.2.6.12.2.7.2.1 |
sm6kSystemProcessLoginUserName of user to whom process belongs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.7.2.1.1 |
sm6kSystemProcessPIDProcess IDro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.2 |
sm6kSystemProcessParentPIDParent Process IDro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.3 |
sm6kSystemProcessCPUTimeTotal CPU Time used since startupro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.7.2.1.4 |
sm6kSystemProcessUserTimeCPU Time used in user mode since startup.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.7.2.1.5 |
sm6kSystemProcessSystemTimeCPU Time used in system mode since startup.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.7.2.1.6 |
sm6kSystemProcessPageFaultsIONumber of Page faults requiring I/O.ro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.7 |
sm6kSystemProcessPageFaultsNoIONumber of Page faults not requiring I/O.ro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.8 |
sm6kSystemProcessPriorityProcess Priorityro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.9 |
sm6kSystemProcessNiceProcess Nice Valuero INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.10 |
sm6kSystemProcessStateCurrent Process statero Enumeration .1.3.6.1.4.1.2.6.12.2.7.2.1.11 |
sm6kSystemProcessWaitProcess wait reasonro Enumeration .1.3.6.1.4.1.2.6.12.2.7.2.1.12 |
sm6kSystemProcessDataResidentSetSizeData resident set size in kilobytes.ro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.13 |
sm6kSystemProcessTextResidentSetSizeText resident set size in kilobytes.ro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.14 |
sm6kSystemProcessImageSizeData Virtual Memory sizero INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.15 |
sm6kSystemProcessDataVirtualMemorySizeData Virtual Memory sizero INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.16 |
sm6kSystemProcessPercentMemoryPercentage of real memory used.ro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.17 |
sm6kSystemProcessCPUSome measure of CPU use.ro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.18 |
sm6kSystemProcessStartTimeProcess starting time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.7.2.1.19 |
sm6kSystemProcessCommandProcess starting command.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.7.2.1.20 |
sm6kSystemProcessLoginUIDLogin User IDro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.21 |
sm6kSystemProcessEffectiveUIDEffective User IDro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.22 |
sm6kSystemProcessEffectiveGIDEffective Group IDro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.23 |
sm6kSystemProcessEffectiveGroupNameEffective Group Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.7.2.1.24 |
sm6kSystemProcessSUIDSaved User IDro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.25 |
sm6kSystemProcessPgrpProcess groupro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.26 |
sm6kSystemProcessPFlagsProcess flags - look in /usr/include/sys/proc.hro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.27 |
sm6kSystemProcessAdspaceProcess Address spacero INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.28 |
sm6kSystemProcessTTYpWhether process has a controlling ttyro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.29 |
sm6kSystemProcessTTYdProcess's Controlling TTYro INTEGER .1.3.6.1.4.1.2.6.12.2.7.2.1.30 |
sm6kSystemProcessNSwapNumber of times process swapped outro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.31 |
sm6kSystemProcessInblocksFile blocks inputro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.32 |
sm6kSystemProcessOutblocksFile blocks outputro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.33 |
sm6kSystemProcessMsgsndNumber of IPC Messages sentro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.34 |
sm6kSystemProcessMsgrcvNumber of IPC Messages receivedro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.35 |
sm6kSystemProcessNsignalsNumber of Signals deliveredro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.36 |
sm6kSystemProcessNVcswNumber of Voluntary context switchesro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.37 |
sm6kSystemProcessNIvcswNumber of Involuntary context switchesro Counter .1.3.6.1.4.1.2.6.12.2.7.2.1.38 |
sm6kSystemProcessArgumentsProcess command syntax in full pathro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.7.2.1.39 |
sm6kSystemProcessSignalSends a signal to process when setro Enumeration .1.3.6.1.4.1.2.6.12.2.7.2.1.40 |
sm6kSystemUsers OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.8 |
sm6kSystemUsersLoggedInThe number of users logged inro Gauge .1.3.6.1.4.1.2.6.12.2.8.1 |
sm6kSystemUsersTableUser table. SEQUENCE OF Sm6kSystemUsersEntry .1.3.6.1.4.1.2.6.12.2.8.2 |
sm6kSystemUsersEntryEach entry contains objects for a particular user. Sm6kSystemUsersEntry .1.3.6.1.4.1.2.6.12.2.8.2.1 |
sm6kSystemUsersNameUser namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.8.2.1.1 |
sm6kSystemUsersLineDevice namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.8.2.1.2 |
sm6kSystemUsersTimeLogin timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.8.2.1.3 |
sm6kSystemUsersPIDProcess IDro INTEGER .1.3.6.1.4.1.2.6.12.2.8.2.1.4 |
sm6kSystemUsersRemoteHostRemote hostnamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.8.2.1.5 |
sm6kSystemUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.9 |
sm6kSystemUtilizationCPU OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.9.1 |
sm6kSystemUtilizationCPUPollingIntervalPolling Interval for CPU dataro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.1 |
sm6kSystemUtilizationCPUCountNumber of CPUs in systemro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.2 |
sm6kSystemUtilizationCPUTableCPU Utilization table. SEQUENCE OF Sm6kSystemUtilizationCPUEntry .1.3.6.1.4.1.2.6.12.2.9.1.3 |
sm6kSystemUtilizationCPUEntryEach entry contains CPU over a different interval Sm6kSystemUtilizationCPUEntry .1.3.6.1.4.1.2.6.12.2.9.1.3.1 |
sm6kSystemUtilizationCPUIntervalNameDescription of intervalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.9.1.3.1.1 |
sm6kSystemUtilizationCPUIntervalStartTimeStart time of intervalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.9.1.3.1.2 |
sm6kSystemUtilizationCPUIntervalLengthLength of Interval over which CPU computedro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.9.1.3.1.3 |
sm6kSystemUtilizationCPUUserAverage Percent CPU in user mode over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.4 |
sm6kSystemUtilizationCPUSystemAverage Percent CPU in system mode over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.5 |
sm6kSystemUtilizationCPUIdleAverage Percent CPU in idle mode over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.6 |
sm6kSystemUtilizationCPUWaitAverage Percent CPU in wait mode over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.7 |
sm6kSystemUtilizationCPUBusyAverage Percent CPU in user and system mode over the
intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.8 |
sm6kSystemUtilizationCPUUserMinimumMinimum Percent CPU user modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.9 |
sm6kSystemUtilizationCPUSystemMinimumMinimum Percent CPU system modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.10 |
sm6kSystemUtilizationCPUIdleMinimumMinimum Percent CPU idle modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.11 |
sm6kSystemUtilizationCPUWaitMinimumMinimum Percent CPU idle modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.12 |
sm6kSystemUtilizationCPUBusyMinimumMinimum Percent CPU user and system modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.13 |
sm6kSystemUtilizationCPUUserMaximumMaximum Percent CPU user modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.14 |
sm6kSystemUtilizationCPUSystemMaximumMaximum Percent CPU system modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.15 |
sm6kSystemUtilizationCPUIdleMaximumMaximum Percent CPU idle modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.16 |
sm6kSystemUtilizationCPUWaitMaximumMaximum Percent CPU idle modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.17 |
sm6kSystemUtilizationCPUBusyMaximumMaximum Percent CPU user and system modero INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.18 |
sm6kSystemUtilizationCPUNumberCPU Number this row applies toro INTEGER .1.3.6.1.4.1.2.6.12.2.9.1.3.1.19 |
sm6kSystemUtilizationKernel OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.9.2 |
sm6kSystemUtilizationKernelPollingIntervalPolling Interval for Utilization kernel dataro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.1 |
sm6kSystemUtilizationKernelTableKernel statistics table. SEQUENCE OF Sm6kSystemUtilizationKernelEntry .1.3.6.1.4.1.2.6.12.2.9.2.2 |
sm6kSystemUtilizationKernelEntryEach entry contains Utilization Kernel over a different
interval Sm6kSystemUtilizationKernelEntry .1.3.6.1.4.1.2.6.12.2.9.2.2.1 |
sm6kSystemUtilizationKernelNameDescription of intervalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.9.2.2.1.1 |
sm6kSystemUtilizationKernelIntervalStartTimeStart time of intervalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.9.2.2.1.2 |
sm6kSystemUtilizationKernelIntervalLengthLength of Interval over which Utilization Kernel computedro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.9.2.2.1.3 |
sm6kSystemUtilizationKernelContextSwitchesTotal number of context switchesro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.4 |
sm6kSystemUtilizationKernelSystemCallsTotal number of system callsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.5 |
sm6kSystemUtilizationKernelSystemReadsTotal number of system readsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.6 |
sm6kSystemUtilizationKernelSystemWritesTotal number of system writesro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.7 |
sm6kSystemUtilizationKernelForksTotal number of forks system callsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.8 |
sm6kSystemUtilizationKernelExecsTotal number of EXEC system callsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.9 |
sm6kSystemUtilizationKernelRunQueueNumber of jobs in the run queuero INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.10 |
sm6kSystemUtilizationKernelSwapQueueNumber of jobs in the swap queuero INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.11 |
sm6kSystemUtilizationKernelSemaphoresTotal number of semaphore operationsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.12 |
sm6kSystemUtilizationKernelMessagesTotal number of message operationsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.13 |
sm6kSystemUtilizationKernelProcessOverflowTotal number of process creation failuresro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.14 |
sm6kSystemUtilizationKernelBytesReadTotal bytes readro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.15 |
sm6kSystemUtilizationKernelBytesWrittenTotal bytes writtenro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.16 |
sm6kSystemUtilizationKernelRawTTYOutTotal raw TTY out countro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.17 |
sm6kSystemUtilizationKernelContextSwitchesMinimumMinimum context switchesro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.18 |
sm6kSystemUtilizationKernelSystemCallsMinimumMinimum system callsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.19 |
sm6kSystemUtilizationKernelSystemReadsMinimumMinimum system readsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.20 |
sm6kSystemUtilizationKernelSystemWritesMinimumMinimum system writesro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.21 |
sm6kSystemUtilizationKernelForksMinimumMinimum forksro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.22 |
sm6kSystemUtilizationKernelExecsMinimumMinimum execsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.23 |
sm6kSystemUtilizationKernelRunQueueMinimumMinimum run queue lengthro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.24 |
sm6kSystemUtilizationKernelSwapQueueMinimumMinimum swap queue lengthro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.25 |
sm6kSystemUtilizationKernelSemaphoresMinimumMinimum semaphore operationsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.26 |
sm6kSystemUtilizationKernelMessagesMinimumMinimum message operationsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.27 |
sm6kSystemUtilizationKernelProcessOverflowMinimumMinimum process creation failuresro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.28 |
sm6kSystemUtilizationKernelBytesReadMinimumMinimum bytes readro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.29 |
sm6kSystemUtilizationKernelBytesWrittenMinimumMinimum bytes writtenro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.30 |
sm6kSystemUtilizationKernelRawTTYOutMinimumMinimum raw TTY out countro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.31 |
sm6kSystemUtilizationKernelContextSwitchesMaximumMaximum context switchesro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.32 |
sm6kSystemUtilizationKernelSystemCallsMaximumMaximum system callsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.33 |
sm6kSystemUtilizationKernelSystemReadsMaximumMaximum system readsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.34 |
sm6kSystemUtilizationKernelSystemWritesMaximumMaximum system writesro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.35 |
sm6kSystemUtilizationKernelForksMaximumMaximum forksro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.36 |
sm6kSystemUtilizationKernelExecsMaximumMaximum execsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.37 |
sm6kSystemUtilizationKernelRunQueueMaximumMaximum run queue lengthro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.38 |
sm6kSystemUtilizationKernelSwapQueueMaximumMaximum swap queue lengthro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.39 |
sm6kSystemUtilizationKernelSemaphoresMaximumMaximum semaphore operationsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.40 |
sm6kSystemUtilizationKernelMessagesMaximumMaximum message operationsro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.41 |
sm6kSystemUtilizationKernelProcessOverflowMaximumMaximum process creation failuresro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.42 |
sm6kSystemUtilizationKernelBytesReadMaximumMaximum bytes readro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.43 |
sm6kSystemUtilizationKernelBytesWrittenMaximumMaximum bytes writtenro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.44 |
sm6kSystemUtilizationKernelRawTTYOutMaximumMaximum raw TTY out countro INTEGER .1.3.6.1.4.1.2.6.12.2.9.2.2.1.45 |
sm6kSystemUtilizationIostat OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.9.3 |
sm6kSystemUtilizationIostatPollingIntervalPolling interval for IO statistics dataro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.1 |
sm6kSystemUtilizationIostatTableInput/Output statistics table. SEQUENCE OF Sm6kSystemUtilizationIostatEntry .1.3.6.1.4.1.2.6.12.2.9.3.2 |
sm6kSystemUtilizationIostatEntryEach entry contains IO statistics over a different interval Sm6kSystemUtilizationIostatEntry .1.3.6.1.4.1.2.6.12.2.9.3.2.1 |
sm6kSystemUtilizationIostatNameDescription of interval - returns hard disk name
and the interval lengthro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.9.3.2.1.1 |
sm6kSystemUtilizationIostatIntervalStartTimeStart time of intervalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.9.3.2.1.2 |
sm6kSystemUtilizationIostatIntervalLengthLength of interval over which IO statistics were computedro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.12.2.9.3.2.1.3 |
sm6kSystemUtilizationIostatPercentTimeActiveAverage Percent Time when the hard disk was busyro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.4 |
sm6kSystemUtilizationIostatKilobytesTransferRateAverage Transfer Ratero INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.5 |
sm6kSystemUtilizationIostatTransfersAverage Number of Transfersro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.6 |
sm6kSystemUtilizationIostatKilobytesReadNumber of Kilobytes read over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.7 |
sm6kSystemUtilizationIostatKilobytesWrittenNumber of kilobytes written over the intervalro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.8 |
sm6kSystemUtilizationIostatPercentTimeActiveMinimumMinimum Percent Time Activero INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.9 |
sm6kSystemUtilizationIostatKilobytesTransferRateMinimumMinimum Transfer Ratero INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.10 |
sm6kSystemUtilizationIostatTransfersMinimumMinimum Number of Transfersro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.11 |
sm6kSystemUtilizationIostatKilobytesReadMinimumMinimum kilobytes readro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.12 |
sm6kSystemUtilizationIostatKilobytesWrittenMinimumMinimum kilobytes writtenro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.13 |
sm6kSystemUtilizationIostatPercentTimeActiveMaximumMaximum percentage Time Activero INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.14 |
sm6kSystemUtilizationIostatKilobytesTransferRateMaximumMaximum Transfer Ratero INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.15 |
sm6kSystemUtilizationIostatTransfersMaximumMaximum Number of Transfersro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.16 |
sm6kSystemUtilizationIostatKilobytesReadMaximumMaximum Number of Kilobytes readro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.17 |
sm6kSystemUtilizationIostatKilobytesWrittenMaximumMaximum Number of Kilobytes writtenro INTEGER .1.3.6.1.4.1.2.6.12.2.9.3.2.1.18 |
sm6kSystemReboot OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.10 |
sm6kSystemRebootTimerSetting this to n will cause a reboot in n secondsrw INTEGER .1.3.6.1.4.1.2.6.12.2.10.1 |
sm6kSystemMiscellaneous OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.2.11 |
sm6kSystemMiscellaneousTimeTextCurrent System Timero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.11.1 |
sm6kSystemMiscellaneousTimeCurrent system time, seconds since reference timero Counter .1.3.6.1.4.1.2.6.12.2.11.2 |
sm6kSystemMiscellaneousRandomA random number generated by the random() callro INTEGER .1.3.6.1.4.1.2.6.12.2.11.3 |
sm6kSystemMiscellaneousFreeSpaceUnallocated space in active volume groups, in kilobytesro INTEGER .1.3.6.1.4.1.2.6.12.2.11.4 |
sm6kSystemMiscellaneousPublicKeyReserved.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.2.11.5 |
sm6kSystemMiscellaneousLocalSocketReserved.ro INTEGER .1.3.6.1.4.1.2.6.12.2.11.6 |
sm6kNetworkInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.3 |
sm6kNetworkSessionInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.3.1 |
sm6kNetworkSessionCountThe number of open sessions.ro INTEGER .1.3.6.1.4.1.2.6.12.3.1.1 |
sm6kNetworkSessionTableSession table - list of nodes with which this agent
is communicating. SEQUENCE OF Sm6kNetworkSessionEntry .1.3.6.1.4.1.2.6.12.3.1.2 |
sm6kNetworkSessionEntryEach entry contains objects for a particular device Sm6kNetworkSessionEntry .1.3.6.1.4.1.2.6.12.3.1.2.1 |
sm6kNetworkSessionNameName or IP address of the node in Systems Monitor sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.3.1.2.1.1 |
sm6kNetworkSessionCurrentStateLast known state of sessionro Enumeration .1.3.6.1.4.1.2.6.12.3.1.2.1.2 |
sm6kNetworkSessionLastStateChangeTime at which session state last changed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.3.1.2.1.3 |
sm6kNetworkSessionLastPollAttemptTime at which session was last polled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.3.1.2.1.4 |
sm6kNetworkSessionAddressFamilyAddress family used to communicate with sessionro Enumeration .1.3.6.1.4.1.2.6.12.3.1.2.1.5 |
sm6kNetworkSessionNetAddressRemote Address of session.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.3.1.2.1.6 |
sm6kNetworkSessionTransmitAttemptsNumber of send transmit attempts made on session.ro Counter .1.3.6.1.4.1.2.6.12.3.1.2.1.7 |
sm6kNetworkSessionPacketsReceivedNumber of packets received on session.ro Counter .1.3.6.1.4.1.2.6.12.3.1.2.1.8 |
sm6kNetworkSessionLastTransmitTimeLast Time at which a transmission was sentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.3.1.2.1.9 |
sm6kNetworkSessionLastReceiveTimeLast Time at which a packet was receivedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.3.1.2.1.10 |
sm6kNetworkSessionMinimumResponseTimeMinimum round-trip time to session since start-up.ro INTEGER .1.3.6.1.4.1.2.6.12.3.1.2.1.11 |
sm6kNetworkSessionRecentAverageResponseTimeAverage response time for the most recent queries.ro INTEGER .1.3.6.1.4.1.2.6.12.3.1.2.1.12 |
sm6kNetworkSessionLifeTimeAverageResponseTimeAverage response time since start-up.ro INTEGER .1.3.6.1.4.1.2.6.12.3.1.2.1.13 |
sm6kNetworkSessionMaximumResponseTimeMaximum round-trip time to session since start-up.ro INTEGER .1.3.6.1.4.1.2.6.12.3.1.2.1.14 |
sm6kCommand OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.4 |
sm6kCommandTableCommand table. SEQUENCE OF Sm6kCommandEntry .1.3.6.1.4.1.2.6.12.4.1 |
sm6kCommandEntryEach entry contains objects for a particular command. Sm6kCommandEntry .1.3.6.1.4.1.2.6.12.4.1.1 |
sm6kCommandStateState of command for execution: disabled (1),
invalid (2), or enabled (3).rw Enumeration .1.3.6.1.4.1.2.6.12.4.1.1.1 |
sm6kCommandNameCommand name for use as a label and row instance. The
selection of a row in the table uses the command name as
the instance for the row selection. The command name is
appended to the row object ID to uniquely identify the
instance of this variable. For example, the instance of
sm6kCommandState is sm6kCommandState.sm6kCommandName,
where each octet in sm6kCommandName is a value in dot
notation for the variable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.4.1.1.2 |
sm6kCommandDescriptionCommand description for the command to execute.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.4.1.1.3 |
sm6kCommandOwnerIDOwner ID (IP address or hostname) who generated the
command entry. This must be initialized by the user.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.4.1.1.4 |
sm6kCommandGetStringAndParametersCommand string and parameters for execution on a
GET request. The GET request must be issued to
the sm6kCommandDisplayStringResult,
sm6kCommandIntegerResult, sm6kCommandCounterResult,
or sm6kCommandGaugeResult for the command to be executed.
Environment variables which are available on execution are:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_COMMAND_TIME_OUT_VALUE={value from TimeOutValue}
SM6K_COMMAND_OWNERID={string from OwnerID}
SM6K_COMMAND_RESULT_TYPE=DisplayString||Integer||Counter||
Gauge
SM6K_COMMAND_SET_VALUE={value from get request}
SM6K_EXECUTION_REASON=Command_Getrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.4.1.1.5 |
sm6kCommandSetStringAndParametersCommand string and parameters for execution on a
SET request. The SET request must be issued to
the sm6kCommandDisplayStringResult,
sm6kCommandIntegerResult, sm6kCommandCounterResult,
or sm6kCommandGaugeResult for the command to be executed.
The SM6K_COMMAND_SET_VALUE contains the value from the SET
request. Environment variables which are available on
command execution are:
SM6K_COMMAND_SET_VALUE={value from set request}
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_COMMAND_TIME_OUT_VALUE={value from TimeOutValue}
SM6K_COMMAND_OWNERID={string from OwnerID}
SM6K_COMMAND_RESULT_TYPE=DisplayString||Integer||Counter||
Gauge
SM6K_EXECUTION_REASON=Command_Setrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.4.1.1.6 |
sm6kCommandTimeOutValueTime out value in seconds for command execution.
The default is three seconds. Time outs over twenty
seconds cause subagent performance degradation for
multiple requests which may be queued.rw INTEGER .1.3.6.1.4.1.2.6.12.4.1.1.7 |
sm6kCommandCountToLiveCount to live in seconds before the command to execute
is executed again. This value is a count down from the
time to live value. This allows multiple GET requests
for parsing of the output from the command execution.
It also allows a SET operation followed by a GET request
so that the GET command is NOT executed on the GET request.ro INTEGER .1.3.6.1.4.1.2.6.12.4.1.1.8 |
sm6kCommandTimeToLiveTime to live value in seconds before the GET or SET command
is executed based on the last time the command was run.
The CountToLive variable is set to this value at command
execution.rw INTEGER .1.3.6.1.4.1.2.6.12.4.1.1.9 |
sm6kCommandOutputResultIndexIndex to point to command output result type.
The results of the command execution are converted
to the type set, displaystring, integer, counter,
or gauge.rw Enumeration .1.3.6.1.4.1.2.6.12.4.1.1.10 |
sm6kCommandOutputRowIndexIndex for the row to be returned. New line is
the delimiter for row. A value of zero returns
all rows. This allows the parsing of the output
from the command execution by row.rw INTEGER .1.3.6.1.4.1.2.6.12.4.1.1.11 |
sm6kCommandOutputColumnIndexIndex for the column to be returned. White space
is the delimiter for the column. A value of zero
returns all columns. This allows the parsing of the
output from the command execution by column.rw INTEGER .1.3.6.1.4.1.2.6.12.4.1.1.12 |
sm6kCommandDisplayStringResultCommand output for ASCII.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.4.1.1.13 |
sm6kCommandIntegerResultCommand result for integer. For each get/set request the
response is saved as a signed integer. The range is
-2147483648 to 2147483647.rw INTEGER .1.3.6.1.4.1.2.6.12.4.1.1.14 |
sm6kCommandCounterResultCommand result for counter. For each get/set request the
command response is saved as an unsigned integer.
The range is 0 to 4294967295.rw Counter .1.3.6.1.4.1.2.6.12.4.1.1.15 |
sm6kCommandGaugeResultCommand result for gauge. For each get/set request the
command response is saved as an unsigned integer.
The range is 0 to 4294967295.rw Gauge .1.3.6.1.4.1.2.6.12.4.1.1.16 |
sm6kCommandExecutionReturnCodeCommand return code from the command execution.ro INTEGER .1.3.6.1.4.1.2.6.12.4.1.1.17 |
sm6kCommandStandardErrorStandard error output from the command execution.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.4.1.1.18 |
sm6kThreshold OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.5 |
sm6kThresholdTableThreshold table. SEQUENCE OF Sm6kThresholdEntry .1.3.6.1.4.1.2.6.12.5.1 |
sm6kThresholdEntryEach entry contains objects for a particular threshold. Sm6kThresholdEntry .1.3.6.1.4.1.2.6.12.5.1.1 |
sm6kThresholdStateState for the threshold operation. The store operation allows
the saving of the MIB variable data in a file during the
threshold polling process. The threshold operation checks
the value of retrieved variables against a threshold; these
operations can be combined.rw Enumeration .1.3.6.1.4.1.2.6.12.5.1.1.1 |
sm6kThresholdNameThis field is used as a label and as the SNMP instance
identifier for variables in this row. The threshold name is
appended to the row variable to uniquely identify the instance
variable. For example, the instance of sm6kThresholdState
(object ID .1.3.6.1.4.1.2.6.12.5.1.1.1) for a threshold
entry named A is 65, with the full object identifier
being .1.3.6.1.4.1.2.6.12.5.1.1.1.65. Each octet in
in sm6kThresholdName is a value in dot notation for the
variable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.2 |
sm6kThresholdDescriptionThis is a description of the threshold being performed for
the benefit of administrators only; it is not used by the
agent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.3 |
sm6kThresholdOwnerIDOwner ID (IP address or hostname) who generated this
entry (not currently used).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.4 |
sm6kThresholdLocalRemoteMIBVariableThis field specifies the MIB variable on which thresholding
is to be performed, in dotted numeric notation, followed by
an instance identifier. For example, to perform threshold
checking mib-2.interfaces.ifTable.ifEntry.ifInErrors
(object ID .1.3.6.1.2.1.2.2.1.14) for interface 1, this
field would contain .1.3.6.1.2.1.2.2.1.14.1. To perform
threshold checking on all instances of a variable, an
asterisk can be used. In the previous example, to perform
threshold checking on all interfaces, the object ID
.1.3.6.1.2.1.2.2.1.14.* would be entered. The instance ID
can also be a non-numeric string, in which case each octet
in the string is converted to an object identifier. For
example, to threshold on the sm6kSystemFileSystemPercentUsed
variable (object ID .1.3.6.1.4.1.2.6.12.2.5.2.1.4) for the
/usr directory, .1.3.6.1.4.1.2.6.12.2.5.2.1.4./usr would be
placed in this field since the Systems Monitor filesystem
table uses the directory name as the index. Most of the
tables supported by the Systems Monitor use a name as an
index, so using the character form of the name provides a
simple way to specify an instance identifier.
If a name followed by a colon is prepended to the object
identifier, it is taken to be an alias for a group of
nodes (if defined in the Systems Monitor Alias Table) or the
name of a remote node. For example, entering
aixnm007:1.3.6.1.2.1.2.2.1.14.* will cause threshold
checking to be performed on all instances of ifInErrors
on machine aixnm007. If aixnm007 is defined in the
Alias Table as an alias for a group of machines,
threshold checking of these variables will be done for
every machine in the group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.5 |
sm6kThresholdConditionCondition operation for threshold value. Allowed conditions
are: =, >, >=, <, <=, !=, !, &, |, changes, doesNotChange,
exists, doesNotExist.
The change condition causes a watchdog operation to be
performed. That is, if the value changes between
consecutive polls, the condition is satisfied. (The
threshold value is ignored in this case).
Similarly, the exist/doesNotExist checks for the actual
existence of the MIB variable; this is useful for
checking for the existence of rows in a table.
The & and | conditions cause the MIB variable value to
be ANDed/Ored with threshold value; if the result is
nonzero, the condition is met and the trap and/or
command to execute is performed.
NOTE: Thresholds for Counter variables are computed by
calculating the change per second in the sampled values and
comparing these against the threshold value. In the case of
Gauge and INTEGER variables, the actual value of the
variable is checked against the threshold value.
The keywords 'delta' and 'value', if placed in front of the
condition (and separated from it by a space) will override
this default behavior. For example, a condition of 'value >'
will cause threshold checking to be performed against the
actual value rather than the change in the value even if
the selected MIB variable is a Counter; a condition of
'delta >' causes the change in the variable (from the previous
value) to be checked against the threshold, regardless of
the type of the variable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.6 |
sm6kThresholdValueThis field specifies the value against which retrieved
variables are checked. The type of check which is done
depends on the type of the retrieved variable. If the
variable is numeric (INTEGER, Counter, etc.) this field is
presumed to be a number, and a numeric comparison is performed
using the specified threshold condition. If the retrieved
variable is a DisplayString (OCTET STRING) and both the
retrieved variable and this field can be converted to a
floating point number, a floating-point comparison is done;
otherwise a string comparison is done.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.7 |
sm6kThresholdPollTimeThreshold polling time. Polling units are in minutes.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.8 |
sm6kThresholdLastValueLast threshold value retrieved, in human-readable form.
If more than one numeric value was retrieved for the
threshold (because an alias was used or because multiple
instances were retrieved), this field contains the
average of all the retrieved values.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.9 |
sm6kThresholdIntegerDataMaxMaximum data value collected for the threshold
being monitored, for variables which are INTEGERs.ro INTEGER .1.3.6.1.4.1.2.6.12.5.1.1.10 |
sm6kThresholdIntegerDataMinInteger minimum data value collected for the threshold
being monitored.ro INTEGER .1.3.6.1.4.1.2.6.12.5.1.1.11 |
sm6kThresholdIntegerDataAvgInteger average data value collected for the threshold
being calculated.ro INTEGER .1.3.6.1.4.1.2.6.12.5.1.1.12 |
sm6kThresholdCounterGaugeDataMaxCounter/gauge maximum data value collected for the
threshold being monitored.ro Gauge .1.3.6.1.4.1.2.6.12.5.1.1.13 |
sm6kThresholdCounterGaugeDataMinCounter/gauge minimum data value collected for the
threshold being monitored.ro Gauge .1.3.6.1.4.1.2.6.12.5.1.1.14 |
sm6kThresholdCounterGaugeDataAvgCounter/gauge average data value collected for the
threshold being calculated.ro Gauge .1.3.6.1.4.1.2.6.12.5.1.1.15 |
sm6kThresholdDataSamplesNumbers of data samples collected for the integer,
counter, or gauge maximum, minimum, and average threshold
data collected. A SET of any value to this variable
causes the maximum, minimum, and average to clear.rw Counter .1.3.6.1.4.1.2.6.12.5.1.1.16 |
sm6kThresholdTrapDescriptionA human-readable description for the trap to be generated;
this description is sent in the trap for operator use.
The environment variables listed below, pre-appended with a $
sign, are allowed in the trap description field.
SM6K_THRESHOLD_CONDITION={condition in the threshold}
SM6K_THRESHOLD_VALUE={threshold value}
SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for re-arm}
SM6K_THRESHOLD_NODE={node on which threshold condition was met}
SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold}
SM6K_THRESHOLD_VAR_TYPE={Integer|Counter|Gauge}
SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold}
SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable}rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.17 |
sm6kThresholdArmEnterpriseThis field specifies the SNMP enterprise id for the trap
which is to be sent when a threshold condition is met. If
this is not set, a default will be used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.18 |
sm6kThresholdSpecificTrapThis field specifies a specific trap number to be sent
when a threshold condition is met. If this value is zero,
no trap will be sent.rw INTEGER .1.3.6.1.4.1.2.6.12.5.1.1.19 |
sm6kThresholdCommandToExecuteCommand to execute when threshold is met. A value of
blank means no command is to be executed on a threshold
met condition. Environment variables which are available
on execution are:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_EXECUTION_REASON=Threshold
SM6K_THRESHOLD_CONDITION={condition in the threshold}
SM6K_THRESHOLD_VALUE={threshold value}
SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for re-arm}
SM6K_THRESHOLD_NODE={node on which threshold condition was met}
SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold}
SM6K_THRESHOLD_VAR_TYPE={Integer|Counter|Gauge}
SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold}
SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable}rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.20 |
sm6kThresholdReArmConditionCondition operation for the rearm threshold value. Allowed
conditions are the same as for the threshold value.
Checking against the rearm condition is started when a
threshold is reached and is stopped when the rearm condition
is met. Once the rearm condition is met, the threshold
condition operation is restarted.
NOTE: Thresholds for Counter variables are computed by
calculating the change per second in the sampled values and
comparing these against the threshold value. In the case of
Gauge and INTEGER variables, the actual value of the variable
is checked against the threshold value.
The keywords 'delta' and 'value', if placed in front of the
condition (and separated from it by a space) will override
this default behavior. For example, a condition of 'value >'
will cause threshold checking to be performed against the
actual value rather than the change in the value even if
the selected MIB variable is a Counter; a condition of
'delta >' causes the change in the variable (from the previous
value) to be checked against the threshold, regardless of
the type of the variable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.21 |
sm6kThresholdReArmValueThis field specifies the value against which retrieved
variables are checked. The type of check which is done
depends on the type of the retrieved variable. If the
variable is numeric (INTEGER, Counter, etc.) this field is
presumed to be a number, and a numeric comparison is performed
using the specified threshold condition. If the retrieved
variable is a DisplayString (OCTET STRING) and both the
retrieved variable and this field can be converted to a
floating point number, a floating-point comparison is done;
otherwise a string comparison is done.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.22 |
sm6kThresholdReArmTrapDescriptionTrap description for the generated rearm trap.
The environment variables listed below, pre-appended with a $
sign, are allowed in the trap description field.
SM6K_THRESHOLD_CONDITION={condition in the threshold}
SM6K_THRESHOLD_VALUE={threshold value}
SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for re-arm}
SM6K_THRESHOLD_NODE={node on which threshold condition was met}
SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold}
SM6K_THRESHOLD_VAR_TYPE={Integer|Counter|Gauge}
SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold}
SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable}rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.23 |
sm6kThresholdReArmEnterpriseThis field specifies the SNMP enterprise id for the trap
which is to be sent when a rearm condition is met. If
this is not set, a default will be used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.24 |
sm6kThresholdReArmSpecificTrapThis field specifies a specific trap number to be sent
when a rearm condition is met. If this value is zero,
no trap will be sent.rw INTEGER .1.3.6.1.4.1.2.6.12.5.1.1.25 |
sm6kThresholdReArmCommandToExecuteCommand to execute when the rearm threshold is met.
A value of blank means no command will be executed
on a rearm threshold met condition. Environment
variables which are available on execution are:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_EXECUTION_REASON=Threshold
SM6K_THRESHOLD_CONDITION={condition in the threshold}
SM6K_THRESHOLD_VALUE={threshold value}
SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for re-arm}
SM6K_THRESHOLD_NODE={node on which threshold condition was met}
SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold}
SM6K_THRESHOLD_VAR_TYPE={integer|counter|gauge}
SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold}
SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable}rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.26 |
sm6kThresholdLastChangedSessionThis field contains the name of the last node for which a
threshold arm/rearm condition was met.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.27 |
sm6kThresholdStandardErrorThis field contains informational and error messages for
this threshold entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.28 |
sm6kThresholdLastResponseTimeThis field contains the last time a (valid or invalid)
response was received to a poll request.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.5.1.1.29 |
sm6kThresholdResponseCountNumber of responses received to date.ro Counter .1.3.6.1.4.1.2.6.12.5.1.1.30 |
sm6kThresholdTimeoutCountNumber of timeout conditions, indicating no response or an
overrun condition (polling speed faster than the response
time from the node(s) being queried).ro Counter .1.3.6.1.4.1.2.6.12.5.1.1.31 |
sm6kThresholdNoValueCountNumber of responses received containing no values. These
responses may be caused by an invalid community name, by
a remote SNMP subagent being down, or by a thresholding on
a variable for which no instances exist.ro Counter .1.3.6.1.4.1.2.6.12.5.1.1.32 |
sm6kAnalysis OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.6 |
sm6kAnalysisTableAnalysis table. SEQUENCE OF Sm6kAnalysisEntry .1.3.6.1.4.1.2.6.12.6.1 |
sm6kAnalysisEntryEach entry contains objects for a particular analysis. Sm6kAnalysisEntry .1.3.6.1.4.1.2.6.12.6.1.1 |
sm6kAnalysisStateState for the analysis operation: disabled (1),
invalid (2), or enabled (3).rw Enumeration .1.3.6.1.4.1.2.6.12.6.1.1.1 |
sm6kAnalysisNameAnalysis name for use as a label and row instance.
The selection of a row in the table uses the analysis name as
the instance for row selection. The analysis name is
appended to the row variable to uniquely identify the instance
variable. For example, the instance of sm6kAnalysisState is
sm6kAnalysisState.sm6kAnalysisName, where each octet in
sm6kAnalysisName is a value in dot notation for the variable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.6.1.1.2 |
sm6kAnalysisDescriptionAnalysis description for the analysis operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.6.1.1.3 |
sm6kAnalysisOwnerIDOwner ID (IP address or hostname) who generated the
command entry. This must be initialized by the user.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.6.1.1.4 |
sm6kAnalysisLocalRemoteMIBVariableExpressionAnalysis MIB variable expression. The expression can be any
expression comprised of local or remote node MIB variables
with the following high to low precedence and left to right
associativity of operators:
() : grouping
- : unary minus
* : multiplication, / : division, % : remainder
+ : addition, - : subtraction
<< : bitwise left shift, >> : bitwise right shift
& : bitwise AND
^ : bitwise exclusive OR
| : bitwise inclusive OR
Expression evaluation/operators are based on standard
c program execution.
Built-in functions available within expressions include:
@sum(MIB variable, MIB variable, ...) - returns the
sum of all values.
@avg(MIB variable, MIB variable, ...) - returns the
average of all values.
@min(MIB variable, MIB variable, ...) - returns the
minimum of all values.
@max(MIB variable, MIB variable, ...) - returns the
maximum of all values.
@diff(MIB variable expression, MIB variable expression) -
returns the positive difference in the two expressions.
@abs(MIB variable expression) - returns the positive
value of the expression.
@rand() - returns a random number between 0 and
42949667295.
To use remote MIB variables, the alias name, host name, or
IP address can be pre-appended to the MIB variable binding.
Also, the object ID can accept a wildcard value (*).
When MIB variables resolve to multiple values or nodes
outside of the built-in functions, all resolved values
are averaged before use in the expression. For example,
routers:.1.2.3.4.5.0/100, would result in the averaging
of all values returned for this aliased MIB variable
before the division by 100 operation is performed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.6.1.1.5 |
sm6kAnalysisPollTimeAnalysis polling time. Polling units are decimal values
appended by the unit: d - day, h - hour, m - minute,
s - second, u - millisecond. If no unit is appended, the
value is minutes. Multiple values/units are allowed
(i.e. 1h45m = 1 hour, 45 minutes).
The default is 1 minute. This polling value is used only
by the MIB variable polling center for retrieval of the
local or remote MIB variable for caching. This is required
so that the MIB variable values are cached and not requested
with GET requests when the expression is evaluated.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.6.1.1.6 |
sm6kAnalysisResultIndexIndex to point to command output result type. The index
defines how the expression is evaluated, either using signed
arithmetic for integer or unsigned arithmetic for counter
and gauge. The result for counter wraps on overflow or
underflow; the result for gauge latches at 0 for underflow
or 4294967295 for overflow.rw Enumeration .1.3.6.1.4.1.2.6.12.6.1.1.7 |
sm6kAnalysisIntegerResultInteger result based on signed arithmetic.ro INTEGER .1.3.6.1.4.1.2.6.12.6.1.1.8 |
sm6kAnalysisCounterResultCounter result based on unsigned arithmetic; this wraps
at the maximum or minimum value.ro Counter .1.3.6.1.4.1.2.6.12.6.1.1.9 |
sm6kAnalysisGaugeResultGauge result based on unsigned arithmetic; this
latches at the maximum or minimum value.ro Gauge .1.3.6.1.4.1.2.6.12.6.1.1.10 |
sm6kAnalysisDisplayStringResultDisplay result as a displayable string. This string
is generated based on the ResultIndex for the type
of the resultant expression: integer, counter, or gauge.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.6.1.1.11 |
sm6kAnalysisReturnCodeReturn code from the evaluation of the expression.ro INTEGER .1.3.6.1.4.1.2.6.12.6.1.1.12 |
sm6kAnalysisStandardErrorStandard error output from the evaluation of the expression.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.6.1.1.13 |
sm6kFilter OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.7 |
sm6kFilterDefaultActionGlobal default as to whether or not the traps
received are to be sent or blocked. If the trap
matches a filter entry, the action specified is taken.
If the trap doesn't match a filter entry and sendTraps
is specified, the trap destinations from the trap
destination table are used.rw Enumeration .1.3.6.1.4.1.2.6.12.7.1 |
sm6kFilterTrapReceptionIndicator of whether or not the AIX Systems
Monitor/6000 subagent should connect to the snmp
trap socket. If enabled (1), the traps will be
read from the socket. If disabled (2), only traps
generated by AIX Systems Monitor/6000 will be filtered
by AIX Systems Monitor/6000 (ie. thresholding traps).
Note: This field cannot be set to enabled if another
process on the host is already receiving traps (ie. the
manager). Conversely, another process on the host
(ie. the manager) will not be able to receive traps
if this field is set to enabled.
Therefore, if a manager is running on the same host as
the AIX Systems Monitor/6000, this field should be set
to disabled.rw Enumeration .1.3.6.1.4.1.2.6.12.7.2 |
sm6kFilterTotalTrapsReceivedCurrent count of the number of traps that have
been received by the AIX Systems Monitor/6000
subagent. The count is reset to zero whenever
the sm6kFilterTripReception MIB variable is set
to enabled (from a disabled state).ro Counter .1.3.6.1.4.1.2.6.12.7.3 |
sm6kFilterTableEntries defining a particular
filter. Each entry may be thought of as a single filter.
Each filter is evaluated against each incoming trap. When
the filter criteria matches the trap, the corresponding
filter actions are taken. The table is indexed by the
sm6kFilterName field. SEQUENCE OF Sm6kFilterEntry .1.3.6.1.4.1.2.6.12.7.4 |
sm6kFilterEntryEach entry contains the components for a particular filter. Sm6kFilterEntry .1.3.6.1.4.1.2.6.12.7.4.1 |
sm6kFilterStateState for the filter rule. When the state is set to
invalid, the filter is deleted. When the filter
entry is set to disabled, the filter is dormant. When
the filter rule is enabled, it may participate in the
filter rule base. The filter rule is participating if
the sm6kFilterParticipationState is set to active.rw Enumeration .1.3.6.1.4.1.2.6.12.7.4.1.1 |
sm6kFilterParticipationStateThis field indicates whether or not the rule is participating
in the filter rule base. When the filter rule is active,
it is participating. When the filter rule is inactive,
it is not participating in the filter rule base, but will
be participating when the activation time arrives.
The participation state can be inactive only if
activation/deactivation days are specified. Otherwise,
the participation state is activated when the
sm6kFilterState field is set to enabled. If this field
is set to notEnabled, the sm6kFilterState field is not
set to enabled.ro Enumeration .1.3.6.1.4.1.2.6.12.7.4.1.2 |
sm6kFilterNameThis field contains the name for a particular filter.
The instance identifier associated with every field
in the filter entry is derived from the name
(dot separated ASCII codes). Therefore, this name
must be unique among all other filter names.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.3 |
sm6kFilterDescriptionDescription of the filter. This field should
contain a general description of what the filter
accomplishes. A user should be able to read this
information and know what filtering is being
done as well as why it is being done.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.4 |
sm6kFilterActionThis field is used to determine whether or not the matching
trap is forwarded on to a manager station. If sendTraps
is specified, then the trap destinations specified in the
filter are included in the list of destinations to which
the trap is forwarded. If blockTraps is specified, then
the trap will not be forwarded unless another filter
is matched that specifies the trap is to be sent. When
this field is set to ThrottleTraps, the throttle expression
needs to be evaluated in order to decide whether to send
or block the received trap.rw Enumeration .1.3.6.1.4.1.2.6.12.7.4.1.5 |
sm6kFilterEntryEnterpriseExpressionThis field is used to match the rule against the enterpriseID
contained in the received trap. The entry may be an alias
name (from the sm6kAlias table), an enterpriseID in dot
notation, or an enterpriseID with a wildcard value (terminated
by an asterisk). The enterpriseID in dot notation should be
fully qualified. An enterpriseID with a wildcard value
matches any enterpriseID with the same partial enterpriseID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.6 |
sm6kFilterAgentAddrExpressionThis field is used to match against the address of the
agent that generated the trap. The agent address expression
is a comma separated list of:
1) an sm6kAliasName (from the sm6kAlias table)
2) a resolvable hostname
3) an ipAddress expression.
If the agent address expression contains an sm6kAliasName
or hostname, the addresses to check the trap against are
determined each time a trap is received.
An ipAddress expression contains four dot separated
sub-expressions that can be either:
1) a decimal number between 0 and 255
2) an inclusive range of numbers between 0 and 255
specified by [#-#] (ie. [0-127])
3) an asterisk (which is simply interpreted as [0-255]).
An example ipAddress expression is '9.67.[128-130].*'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.7 |
sm6kFilterGenericExpressionThis field is used to match against the generic trap number
contained in the received trap. This field allows a comma
separated list of generic trap numbers. If specific trap
numbers are to be checked, a 6 (ie. enterprise-specific
trap) must be encoded in the generic expression.
The generic traps are:
0 - Cold Start
1 - Warm Start
2 - Link Down
3 - Link Up
4 - Authentication Failure
5 - EGP Neighbor Loss
6 - Enterprise Specificrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.8 |
sm6kFilterSpecificExpressionThis field is used to match against the specific trap number
contained in the received trap. This field allows a
comma separated list of specific trap numbers. A range of
specific trap numbers may be specified by inserting a ':'
between two specific trap numbers. This field will only
be checked if a 6 (ie. enterprise-specific trap) is contained
in the generic trap expression.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.9 |
sm6kFilterVariableExpressionNot implementedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.10 |
sm6kFilterTotalTrapsMatchedThis field contains the number of traps that have
matched this filter. This count is reset to zero
whenever the filter entry's state is set to enabled
(from the disabled state).ro Counter .1.3.6.1.4.1.2.6.12.7.4.1.11 |
sm6kFilterActivationTimeThis field specifies the time to activate the filter
(ie. change the participation state from inactive to active).
The format should be HH:MM where HH represents the hour
(integer between 0 and 23) and MM represents the minute
(integer between 0 and 59) to activate the filter. A value
all blanks will be interpreted as 00:00.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.12 |
sm6kFilterActivationDayOfWeekThis field specifies the days of the week to activate
the filter at the time specified in the ActivationTime field
(ie. change the participation state from inactive to active).
The day of the week may be one of three literals:
weekdays - Activates filter entry on MTWThF
all - Activates filter entry every day SuMTWThFS
Alternatively, the days of the week may be specified as a
list of numbers between 0 and 6 (Sunday = 0, Monday = 1, ...,
Saturday = 6). The expression '1,3,5' would activate the
filter entry at the specified time on MWF.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.13 |
sm6kFilterDeactivationTimeThis field specifies the time to deactivate the filter
(ie. change the participation state from active to inactive).
The format should be HH:MM where HH represents the hour
(integer between 0 and 23) and MM represents the minute
(integer between 0 and 59) to deactivate the filter. A value
all blanks will be interpreted as 00:00.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.14 |
sm6kFilterDeactivationDayOfWeekThis field specifies the days of the week to deactivate
the filter at the time specified in the DeactivationTime field
(ie. change the participation state from active to inactive).
The day of the week may be one of three literals:
weekdays - Dectivates filter entry on MTWThF
all - Deactivates filter entry every day SuMTWThFS
Alternatively, the days of the week may be specified as a
list of numbers between 0 and 6 (Sunday = 0, Monday = 1, ...,
Saturday = 6). The expression '1,3,5' would deactivate the
filter entry at the specified time on MWF.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.15 |
sm6kFilterTrapDestinationsThis field specifies the destinations for any traps
that match the filter criteria specified. This field allows
ip addresses, alias names (from the sm6kAlias table) or
resolvable hostnames separated by commas. If this
field is left blank, the trap will be sent to the trap
destinations specified in the sm6kTrapDestination table.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.16 |
sm6kFilterMatchedCommandThis field specifies the command to be executed when a
received trap matches the filter. A set of environment
variables are defined that contain information from the
received trap. They may be used by the command that is
executed.
The following environment variables pertain to the AIX
Systems Monitor/6000 filter:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_EXECUTION_REASON=Filter_Matched|Filter_Armed|
Filter_Disarmed
The following environment variables pertain to the received
trap:
SM6K_TRAP_ENTERPRISE={enterprise ID from the trap}
SM6K_TRAP_AGENT_ADDRESS={IP address of the sending agent}
SM6K_TRAP_GENERIC_NUM={generic trap number of the trap}
SM6K_TRAP_SPECIFIC_NUM={specific trap number of the trap}
SM6K_TRAP_TIME_TICKS={time ticks since the sending agent
was started}
SM6K_NUM_TRAP_VARS={number of MIB variables in the trap}
In addition, for each variable flowing in the trap:
SM6K_TRAP_VAR_OBJ_ID#={Object ID for MIB variable in trap}
SM6K_TRAP_VAR_TYPE#=INTEGER|Counter|Gauge|TimeTicks|
IpAddress|OCTET_STRING|Opaque|
OBJECT_IDENTIFIER|NULL|Unknown
SM6K_TRAP_VAR_VALUE#={value of the MIB object}
where the # is replaced by the trap variable's positional
number in the trap (starting at 1)
For more information see the accompanying documentation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.17 |
sm6kFilterMatchedTrapDescriptionNot implementedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.18 |
sm6kFilterMatchedTrapEnterpriseNot implementedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.19 |
sm6kFilterMatchedSpecificTrapNot implementedrw INTEGER .1.3.6.1.4.1.2.6.12.7.4.1.20 |
sm6kFilterThrottleTypeThis field is used to indicate whether the throttle sends
the first N matching traps (sendFirstN) or sends after
receiving N matching traps (sendAfterN). The value of N
is specified by the sm6kFilterThrottleArmTrapCount.rw Enumeration .1.3.6.1.4.1.2.6.12.7.4.1.21 |
sm6kFilterThrottleArmTrapCountThis field specifies the number of matching traps to
receive before throttling is armed. This is the N
referred to in the FilterThrottleType field.rw INTEGER .1.3.6.1.4.1.2.6.12.7.4.1.22 |
sm6kFilterThrottleArmedCommandThis field specifies the command to execute when the
ThrottleArmTrapCount number of traps have been received
(ie. when the throttle is ARMED). A set of environment
variables are defined that contain information from
the received trap. They may be used by the command that
is executed.
The following environment variables pertain to the AIX
Systems Monitor/6000 filter:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_EXECUTION_REASON=Filter_Armed
SM6K_THROTTLE_ARM_COUNT={value of ThrottleArmTrapCount}
SM6K_THROTTLE_DISARM_COUNT={value of ThrottleDisarmTrapCount}
SM6K_THROTTLE_DISARM_TIMER={value of ThrottleDisarmTimer}
The following environment variables pertain to the received
trap:
SM6K_TRAP_ENTERPRISE={enterprise ID from the trap}
SM6K_TRAP_AGENT_ADDRESS={IP address of the sending agent}
SM6K_TRAP_GENERIC_NUM={generic trap number of the trap}
SM6K_TRAP_SPECIFIC_NUM={specific trap number of the trap}
SM6K_TRAP_TIME_TICKS={time ticks since the sending agent
was started}
SM6K_NUM_TRAP_VARS={number of MIB variables in the trap}
In addition, for each variable flowing in the trap:
SM6K_TRAP_VAR_OBJ_ID#={Object ID for MIB variable in trap}
SM6K_TRAP_VAR_TYPE#=INTEGER|Counter|Gauge|TimeTicks|
IpAddress|OCTET_STRING|Opaque|
OBJECT_IDENTIFIER|NULL|Unknown
SM6K_TRAP_VAR_VALUE#={value of the MIB object}
where the # is replaced by the trap variable's positional
number in the trap (starting at 1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.23 |
sm6kFilterThrottleArmedTrapDescriptionNot implementedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.24 |
sm6kFilterThrottleArmedTrapEnterpriseNot implementedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.25 |
sm6kFilterThrottleArmedSpecificTrapNot implementedrw INTEGER .1.3.6.1.4.1.2.6.12.7.4.1.26 |
sm6kFilterThrottleDisarmTimerThis field specifies the time period to elapse before
the throttle is disarmed (reset). It is important to note
that if sm6kThrottleDisarmTrapCount is set to a value
greater than 0, the amount of time specified may not
elapse before the throttle is disarmed.
This time period is from the time the throttle is started
(ie. from the time the first matching trap is received),
not from the time the throttle is armed. Therefore, it is
possible that the throttle will not be armed before the
throttle is disarmed (reset). In this case, the disarm
command is NOT executed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.27 |
sm6kFilterThrottleDisarmTrapCountThis field specifies the delta number of traps to receive
before the throttle is disarmed. This field value is a
delta and only refers to the number of matching traps
received AFTER the throttle has been armed. It is important
to note that if the sm6kThrottleDisarmTimer is set, the
number of matching traps specified may not occur before
the throttle is disarmed.rw INTEGER .1.3.6.1.4.1.2.6.12.7.4.1.28 |
sm6kFilterThrottleDisarmedCommandThis field specifies the command to execute when the throttle
is DISARMED. The throttle is disarmed when either
1) the sm6kThrottleDisarmTrapCount matching traps have
occurred after the throttle was armed, or
2) the sm6kFilterThrottleDisarmTimer has expired.
NOTE: If the above mentioned timer expires and the throttle
is NOT currently ARMED, the throttle is reset, but
this disarm command is NOT executed. So, the disarm
command is only executed if the throttle is armed
before being disarmed.
A set of environment variables are defined that contain
information from the received trap. They may be used by
the command that is executed.
The following environment variables pertain to the AIX
Systems Monitor/6000 filter:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_EXECUTION_REASON=Filter_Disarmed
SM6K_THROTTLE_ARM_COUNT={value of ThrottleArmTrapCount}
SM6K_THROTTLE_DISARM_COUNT={value of ThrottleDisarmTrapCount}
SM6K_THROTTLE_DISARM_TIMER={value of ThrottleDisarmTimer}
The following environment variables pertain to the received
trap:
SM6K_TRAP_ENTERPRISE={enterprise ID from the trap}
SM6K_TRAP_AGENT_ADDRESS={IP address of the sending agent}
SM6K_TRAP_GENERIC_NUM={generic trap number of the trap}
SM6K_TRAP_SPECIFIC_NUM={specific trap number of the trap}
SM6K_TRAP_TIME_TICKS={time ticks since the sending agent
was started}
SM6K_NUM_TRAP_VARS={number of MIB variables in the trap}
In addition, for each variable flowing in the trap:
SM6K_TRAP_VAR_OBJ_ID#={Object ID for MIB variable in trap}
SM6K_TRAP_VAR_TYPE#=INTEGER|Counter|Gauge|TimeTicks|
IpAddress|OCTET_STRING|Opaque|
OBJECT_IDENTIFIER|NULL|Unknown
SM6K_TRAP_VAR_VALUE#={value of the MIB object}
where the # is replaced by the trap variable's positional
number in the trap (starting at 1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.29 |
sm6kFilterThrottleDisarmedTrapDescriptionNot implementedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.30 |
sm6kFilterThrottleDisarmedTrapEnterpriseNot implementedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.31 |
sm6kFilterThrottleDisarmedSpecificTrapNot implementedrw INTEGER .1.3.6.1.4.1.2.6.12.7.4.1.32 |
sm6kFilterThrottleStateThis field contains the current state of the throttle.
The current state can be either disarmed (1) or armed (2).
This field is for informational purposes only and cannot
be set.ro Enumeration .1.3.6.1.4.1.2.6.12.7.4.1.33 |
sm6kFilterThrottleTimeStartedThis filed contains the time when the throttle was started.
This field will contain either the time the first matching
trap was received or the time when the throttle was
disarmed due to the expiration of the disarm timer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.7.4.1.34 |
sm6kFilterThrottleTrapCountThis field contains the current count of traps received
since the throttle was disarmed.ro INTEGER .1.3.6.1.4.1.2.6.12.7.4.1.35 |
sm6kAlias OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.8 |
sm6kAliasTableAlias table. SEQUENCE OF Sm6kAliasEntry .1.3.6.1.4.1.2.6.12.8.1 |
sm6kAliasEntryEach entry contains objects for a particular alias. Sm6kAliasEntry .1.3.6.1.4.1.2.6.12.8.1.1 |
sm6kAliasStateState of the alias entry: disabled (1), invalid (2),
or enabled (3).rw Enumeration .1.3.6.1.4.1.2.6.12.8.1.1.1 |
sm6kAliasNameName that can be used in the threshold and analysis MIB
variable definitions to allow multiple remote node
retrieval of the MIB variable value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.8.1.1.2 |
sm6kAliasListList of alias names, host names, or IP addresses separated
by white space or commas.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.8.1.1.3 |
sm6kAliasResolvedListExpanded alias.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.8.1.1.4 |
sm6kTrapDestination OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.9 |
sm6kTrapDestinationTableTrap destination table. This table is used to define
the trap destinations for traps to be forwarded by
the filtering piece of the subagent. It does not
replace or update filtering entries in the snmpd.conf
file. If filtering is being used, the snmpd.conf file
should be setup to send traps to loopback. SEQUENCE OF Sm6kTrapDestinationEntry .1.3.6.1.4.1.2.6.12.9.1 |
sm6kTrapDestinationEntryEach entry contains objects for a particular trap
destination. Sm6kTrapDestinationEntry .1.3.6.1.4.1.2.6.12.9.1.1 |
sm6kTrapDestinationStateState for the trap destination entry. Enabling this
trap destination causes the traps being filtered to use
this destination as a default destination (ie. the
filtering entry may override where traps are to be
sent).rw Enumeration .1.3.6.1.4.1.2.6.12.9.1.1.1 |
sm6kTrapDestinationNameThis field is simply used as the name of this entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.9.1.1.2 |
sm6kTrapDestinationHostThis field specifies the hosts to which filtered traps
are forwarded. It may be a list containing alias names
(contained in the sm6kAlias table), resolvable hostnames,
or IP Addresses.
Each name in the list should be separated by a comma
or white space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.9.1.1.3 |
sm6kTrapDestinationMaskThis mask is used as a global filtering mechanism. The
mask is used to indicate which traps are to be sent
to the Destination Host. Bits 0 through 6, when read from
LEFT to RIGHT, correspond to generic trap numbers 0 through
6. The generic traps are as follows:
0 - Cold Start
1 - Warm Start
2 - Link Down
3 - Link Up
4 - Authentication Failure
5 - EGP Neighbor Loss
6 - Enterprise Specific
This field should be set to 254 to send all traps
that the filter passes to the trap destination table.
To send only linkDown (2) and linkUp (3) traps, the mask
could be set to 48 (ie. 0011 0000).rw INTEGER .1.3.6.1.4.1.2.6.12.9.1.1.4 |
sm6kAdministration OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.12.10 |
sm6kAdministrationTableTable of user information. SEQUENCE OF Sm6kAdministrationEntry .1.3.6.1.4.1.2.6.12.10.1 |
sm6kAdministrationEntryEach entry contains objects for a particular
administrative community. Sm6kAdministrationEntry .1.3.6.1.4.1.2.6.12.10.1.1 |
sm6kAdministrationFieldStateIndication that administrative information is either
valid (1), invalid (2), or outdated (3).
Note: Setting state to invalid will delete the row.rw Enumeration .1.3.6.1.4.1.2.6.12.10.1.1.1 |
sm6kAdministrationFieldNameName of administrative information. There should be a
corporate-wide policy on naming information in order to avoid
possible naming conflicts.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.10.1.1.2 |
sm6kAdministrationFieldOwnerOwner of this piece of administrative information.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.10.1.1.3 |
sm6kAdministrationFieldDescriptionDescription of the administrative information.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.10.1.1.4 |
sm6kAdministrationFieldValueThe actual administrative information.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.12.10.1.1.5 |