IBM6611-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
1635
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
1635 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
SNMPv2-TC Unknown .1.3.6.1.4.1.2 |
ibmProd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6 |
ibm6611 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2 |
ibmSubagents OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.1 |
ibmChipSets OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2 |
ibmChipSetIntel OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2.1 |
ibmChipSetIntel82596B OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2.1.1 |
ibmChipSetIBM OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2.2 |
ibmChipSetIBM8025A OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2.2.1 |
ibmChipSetIBM8025B OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2.2.2 |
ibmChipSetSignetics OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2.3 |
ibmChipSetSigneticsSCN68562 OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.2.3.1 |
ibmDSUs OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.3 |
cylink OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.3.1 |
cylinkStatusTableThe cylink Status table. This table contains
information about the current state of the
Cylink CSUs attached to the system. SEQUENCE OF CYLINKStatusEntry .1.3.6.1.4.1.2.6.2.3.1.1 |
cylinkStatusEntryAn entry in the cylink Status table. CYLINKStatusEntry .1.3.6.1.4.1.2.6.2.3.1.1.1 |
cylinkIndexAn index value that uniquely identifies a cylink
system interface. The interface identified by a
particular value of this index is the same
interface as identified by the same value in an
ifIndex object instance.ro INTEGER .1.3.6.1.4.1.2.6.2.3.1.1.1.1 |
cylinkLinkStateThe current state of the link. The meanings
of the values are:
cylinkNotConnected(1)
The link is not physically connected
to the CSU. This may be due to loss of
input circuit or loss of output circuit.
cylinkNoInput(2)
The input circuit is not connected.
cylinkNoOutput(3)
The output circuit is not connected.
cylinkConnected(4)
The link is connected to the CSU.ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.1.1.2 |
cylinkLoopbackThe loopback mode of the link. The meaning of
values are:
cylinkNoLoopback(1)
The link is not in loopback mode.
cylinkNearEndLoopback(2)
The link has been placed in loopback mode at
the near end: data is being looped back within
the local CSU.
cylinkFarEndLoopback(3)
The link has been placed in loopback mode at the
far end: data is being looped across the link to
the remote CSU and back.ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.1.1.3 |
cylinkQRSSThe Quasi-Random Signal Sequence test mode of the
CSU. The value of the meanings are:
cylinkNoQRSS(1)
The CSU is not in QRSS mode.
cylinkQRSSMaster(2)
The CSU is transmitting a QRSS test
pattern.
cylinkQRSSSlave(3)
The CSU is receiving a QRSS test pattern.ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.1.1.4 |
cylinkConfigTableThe cylink Configuration table. This table contains
information about the configuration of the Cylink CSUs
attached to the system. SEQUENCE OF CYLINKConfigEntry .1.3.6.1.4.1.2.6.2.3.1.3 |
cylinkConfigEntryAn entry in the cylink Configuration table. CYLINKConfigEntry .1.3.6.1.4.1.2.6.2.3.1.3.1 |
cylinkConfigIndexThe index value which uniquely identifies the
CSU to which this entry is applicable. The
CSU identified by a particular value of
this index is the same CSU as identified
by the same value in a cylinkIndex object
instance.ro INTEGER .1.3.6.1.4.1.2.6.2.3.1.3.1.1 |
cylinkSerialNumberThe manufacturer's serial number of this CSU.ro INTEGER .1.3.6.1.4.1.2.6.2.3.1.3.1.2 |
cylinkSoftwareVersionThe version number of the microcode running in the CSU.ro DisplayString .1.3.6.1.4.1.2.6.2.3.1.3.1.3 |
cylinkDTEFramingThe DTE framing selected (D4, or ESF). Framing conversion is
automatically performed at both ends if the DTE is D4 framed and
the network interface is ESF framed.ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.4 |
cylinkNetworkFramingThe network framing selected (D4, or ESF). Framing conversion is
automatically performed at both ends if the DTE is D4 framed and
the network interface is ESF framed.ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.5 |
cylinkDTEDS1ModeThe DTE DS-1 mode selected (B8ZS, or AMI).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.6 |
cylinkNetworkDS1ModeThe network DS-1 mode selected (B8ZS, or AMI).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.7 |
cylinkOnesResponsibilityThe component selected for Ones Density Responsibility (DTE,
or CSU.ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.8 |
cylinkOnesControlThe Ones Density Control selected (LSB 24, D4 FRM, or ESF DL).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.9 |
cylinkZeroProtectionThe Consecutive Zero Control selected (15, or 80).
This determines the the maximum number of consecutive
zeros allowed in the data stream before a one is forced.ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.10 |
cylinkClockSourceThe transmit clock source selected for NRZ DIUs
(network, DTE, an external clock, or the CSU's
internal clock).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.11 |
cylinkClockFrequencyThe external clock frequency selected (56 kHz, 256 kHz,
1.344 MHz, 1.544 MHz).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.12 |
cylinkClockBackupThe transmit clock backup source selected for NRZ DIUs
(network, DTE, an external clock, or the CSU's internal
clock).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.13 |
cylinkDIUFrequencyThe DIU frequency selected for NRZ DIUs
(767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.14 |
cylinkDIUTimingThe DIU transmit timing selected for NRZ DIUs
(Send Timing, or Terminal Timing).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.15 |
cylinkDialoutCapabilityThe DIU dial-out capability selected (polled,
tone, or pulse).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.16 |
cylinkDialoutHoldoffThe mininum time, in minutes, between successful
CSU-to-NMS connections to report alarm conditions.ro INTEGER .1.3.6.1.4.1.2.6.2.3.1.3.1.17 |
cylinkPrimaryPhoneThe primary telephone number used by by the CSU to contact
the NMS.ro DisplayString .1.3.6.1.4.1.2.6.2.3.1.3.1.18 |
cylinkSecondaryPhoneThe secondary telephone number used by by the CSU
to contact the NMS.ro DisplayString .1.3.6.1.4.1.2.6.2.3.1.3.1.19 |
cylinkAlarmRepeatTimeThe interval, in minutes, that the CSU will insert
duplicate messages in the alarm queue for persistant
alarm conditions.ro INTEGER .1.3.6.1.4.1.2.6.2.3.1.3.1.20 |
cylinkESThresholdThe threshold, in seconds, for the errored second
value in the current 15-minute interval.ro INTEGER .1.3.6.1.4.1.2.6.2.3.1.3.1.21 |
cylinkSecondaryContactThe state of the CSU secondary contact (open or closed).ro Enumeration .1.3.6.1.4.1.2.6.2.3.1.3.1.22 |
ibmsystem OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.4 |
ibmMainProcessorLoadTableA table containing the average main processor
load over each minute for the last 60 minutes. SEQUENCE OF IbmMainProcessorLoadEntry .1.3.6.1.4.1.2.6.2.4.1 |
ibmMainProcessorLoadEntryAn entry in the main processor load table. IbmMainProcessorLoadEntry .1.3.6.1.4.1.2.6.2.4.1.1 |
ibmMainProcessorLoadIndexIndicates the number of minutes ago that this
entry contains main processor load information for.ro INTEGER .1.3.6.1.4.1.2.6.2.4.1.1.1 |
ibmMainProcessorLoadThe main processor load averaged over one minute.
The load is given as a percentage. For example, 25% is 25.ro Gauge .1.3.6.1.4.1.2.6.2.4.1.1.2 |
ibmswvpd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.4.2 |
swVpdTableA table containing software vital product data information. SEQUENCE OF SwVpdEntry .1.3.6.1.4.1.2.6.2.4.2.1 |
swVpdEntryAn entry for a piece of software installed on this router. SwVpdEntry .1.3.6.1.4.1.2.6.2.4.2.1.1 |
swvpdIndexA unique value for each entry in this table.ro INTEGER .1.3.6.1.4.1.2.6.2.4.2.1.1.1 |
swvpdNameThe name of this software product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.4.2.1.1.2 |
swvpdPtfNameIf this entry represents a PTF, this object contains
the name of the PTF. Otherwise this object contains
a string of zero length.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.4.2.1.1.3 |
swvpdVerIdThe version identifier for this piece of software.ro INTEGER .1.3.6.1.4.1.2.6.2.4.2.1.1.4 |
swvpdRelIdThe release identifier for this piece of software.ro INTEGER .1.3.6.1.4.1.2.6.2.4.2.1.1.5 |
swvpdModIdThe modification level identifier for this piece of software.ro INTEGER .1.3.6.1.4.1.2.6.2.4.2.1.1.6 |
swvpdFixIdThe fix level identifier for this piece of software.ro INTEGER .1.3.6.1.4.1.2.6.2.4.2.1.1.7 |
swvpdStateThe state of the action in swvpdAction being performed
on this software.ro Enumeration .1.3.6.1.4.1.2.6.2.4.2.1.1.8 |
swvpdActionThe action being performed on this software.ro Enumeration .1.3.6.1.4.1.2.6.2.4.2.1.1.9 |
swvpdPathAn indication of which part of the system this
software is installed on. The values correspond to
the following paths:
root(1) /etc/objrepos
usr(2) /usr/lib/objrepos
share(3) /usr/share/lib/objreposro Enumeration .1.3.6.1.4.1.2.6.2.4.2.1.1.10 |
swvpdDateTimeA string indicating the date and time that the action in
swvpdAction was performed on this software.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.4.2.1.1.11 |
ibmmaint OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.4.4 |
ibmmaintShutdownWhen read, an active 6611 will return the value
running(1).
To force a shutdown, without a subsequent re-ipl
of the 6611, this value should be set to
shutdown-noipl(2).
To recyle the 6611, (i.e.- shutdown with a
subsequent re-ipl), and use the currently installed
configuration, this variable should be set
to shutdown-ipl-local(4).rw Enumeration .1.3.6.1.4.1.2.6.2.4.4.1 |
ibmicmp OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.5 |
ibmsnmp OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.6 |
ibmTrapNumNumber of IBM enterprise specific traps
generated by this node.ro Counter .1.3.6.1.4.1.2.6.2.6.1 |
ibmTrapThrottleCountNumber of traps throttled since last trap.ro Counter .1.3.6.1.4.1.2.6.2.6.2 |
ibmTrapThrottleIdTrap ID of throttled traps. All throttled traps counted
by ibmTrapThrottleCount have the this ID.ro INTEGER .1.3.6.1.4.1.2.6.2.6.3 |
ibmTrapThrottleTimeNumber of seconds which must separate consecutive
enterprise-specific traps with identical ID in order to not
throttle them. If the value of this object is 0, then
trap throttling is inactive.ro INTEGER .1.3.6.1.4.1.2.6.2.6.4 |
ibmbridge OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7 |
ibmbridgeMACAddressFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.1 |
ibmmacAddrFilterInfoTableTable of MAC address filtering information. SEQUENCE OF MacAddrFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.1.1 |
ibmmacAddrFilterInfoEntryMAC address filtering information for a single interface. MacAddrFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.1.1.1 |
ibmmacAddrFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.1.1.1.1 |
ibmmacAddrFilterInBcastTypeFor the incoming MAC address filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.1.1.1.2 |
ibmmacAddrFilterOutBcastTypeFor the outgoing MAC address filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.1.1.1.3 |
ibmmacAddrFilterInFilterTypeFor the incoming filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.1.1.1.4 |
ibmmacAddrFilterOutFilterTypeFor the outgoing filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.1.1.1.5 |
ibmmacAddrFilterInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.1.1.1.6 |
ibmmacAddrFilterOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.1.1.1.7 |
ibmmacAddrFilterTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.1.1.1.8 |
ibmmacAddrFilterInTableTable of MAC address filtering information
for incoming frames. SEQUENCE OF MacAddrFilterInEntry .1.3.6.1.4.1.2.6.2.7.1.2 |
ibmmacAddrFilterInEntryFiltering information for incoming frames. MacAddrFilterInEntry .1.3.6.1.4.1.2.6.2.7.1.2.1 |
ibmmacAddrFilterInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.1.2.1.1 |
ibmmacAddrFilterInSrcAddressMAC source address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.2.1.2 |
ibmmacAddrFilterInSrcMaskMask to allow ibmmacAddrFilterInSrcAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.2.1.3 |
ibmmacAddrFilterInDestAddressMAC destination address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.2.1.4 |
ibmmacAddrFilterInDestMaskMask to allow ibmmacAddrFilterInDestAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.2.1.5 |
ibmmacAddrFilterInTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.1.2.1.6 |
ibmmacAddrFilterOutTableTable of MAC address filtering information
for outgoing frames. SEQUENCE OF MacAddrFilterOutEntry .1.3.6.1.4.1.2.6.2.7.1.3 |
ibmmacAddrFilterOutEntryFiltering information for outgoing frames. MacAddrFilterOutEntry .1.3.6.1.4.1.2.6.2.7.1.3.1 |
ibmmacAddrFilterOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.1.3.1.1 |
ibmmacAddrFilterOutSrcAddressMAC source address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.3.1.2 |
ibmmacAddrFilterOutSrcMaskMask to allow ibmmacAddrFilterOutSrcAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.3.1.3 |
ibmmacAddrFilterOutDestAddressMAC destination address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.3.1.4 |
ibmmacAddrFilterOutDestMaskMask to allow ibmmacAddrFilterOutDestAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.1.3.1.5 |
ibmmacAddrFilterOutTypeType type of entry either sr or tbro Enumeration .1.3.6.1.4.1.2.6.2.7.1.3.1.6 |
ibmbridgeSAPFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.2 |
ibmsapFilterInfoTableTable of SAP filtering information. SEQUENCE OF SapFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.2.1 |
ibmsapFilterInfoEntrySAP filtering information for a single interface. SapFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.2.1.1 |
ibmsapFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.2.1.1.1 |
ibmsapFilterInBcastTypeFor the incoming SAP filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.2.1.1.2 |
ibmsapFilterOutBcastTypeFor the outgoing SAP filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.2.1.1.3 |
ibmsapFilterInA bitmap of all possible source SAPs (even) that will
be on or off depending on whether or not an incoming
frame with that SAP is to be forwarded.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.2.1.1.4 |
ibmsapFilterOutA bitmap of all possible source SAPs (even) that will
be on or off depending on whether or not an outgoing
frame with that SAP is to be forwarded.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.2.1.1.5 |
ibmsapFilterInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.2.1.1.6 |
ibmsapFilterOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.2.1.1.7 |
ibmsapFilterTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.2.1.1.8 |
ibmbridgeSNAPFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.3 |
ibmsnapFilterInfoTableTable of SNAP filtering information. Note that
SNAP filtering only comes into play if packets with
source SAP 0xAA are being forwarded. SEQUENCE OF SnapFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.3.1 |
ibmsnapFilterInfoEntrySNAP filtering information for a single interface. SnapFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.3.1.1 |
ibmsnapFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.3.1.1.1 |
ibmsnapFilterInFilterTypeFor the incoming SNAP filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.3.1.1.2 |
ibmsnapFilterOutFilterTypeFor the outgoing SNAP filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.3.1.1.3 |
ibmsnapFilterInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.3.1.1.4 |
ibmsnapFilterOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.3.1.1.5 |
ibmsnapFilterTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.3.1.1.6 |
ibmsnapFilterInTableTable of SNAP type filtering information
for incoming frames. Note that the entries in
this table only come into play if packets with
source SAP 0xAA are being forwarded. SEQUENCE OF SnapFilterInEntry .1.3.6.1.4.1.2.6.2.7.3.2 |
ibmsnapFilterInEntryFiltering information for a single SNAP value on a
single interface. SnapFilterInEntry .1.3.6.1.4.1.2.6.2.7.3.2.1 |
ibmsnapFilterInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.3.2.1.1 |
ibmsnapFilterInValueIndicates which SNAP value to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.3.2.1.2 |
ibmsnapFilterInMaskMask to allow ibmsnapFilterInValue to be used as a range of
values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.3.2.1.3 |
ibmsnapFilterInTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.3.2.1.4 |
ibmsnapFilterOutTableTable of SNAP filtering information
for outgoing frames. Note that the entries in
this table only come into play if packets with
source SAP 0xAA are being forwarded. SEQUENCE OF SnapFilterOutEntry .1.3.6.1.4.1.2.6.2.7.3.3 |
ibmsnapFilterOutEntryFiltering information for a single SNAP value on a
single interface. SnapFilterOutEntry .1.3.6.1.4.1.2.6.2.7.3.3.1 |
ibmsnapFilterOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.3.3.1.1 |
ibmsnapFilterOutValueIndicates which SNAP values to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.3.3.1.2 |
ibmsnapFilterOutMaskMask to allow ibmsnapFilterOutValue to be used as a
range of values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.3.3.1.3 |
ibmsnapFilterOutTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.3.3.1.4 |
ibmbridgeRingFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.4 |
ibmringFilterInfoTableTable of ring filtering information. SEQUENCE OF RingFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.4.1 |
ibmringFilterInfoEntryRing filtering information for a single interface. RingFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.4.1.1 |
ibmringFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.4.1.1.1 |
ibmringFilterInBcastTypeFor the incoming ring filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.4.1.1.2 |
ibmringFilterOutBcastTypeFor the outgoing ring filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.4.1.1.3 |
ibmringFilterInFilterTypeFor the incoming ring filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.4.1.1.4 |
ibmringFilterOutFilterTypeFor the outgoing ring filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.4.1.1.5 |
ibmringFilterInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.4.1.1.6 |
ibmringFilterOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.4.1.1.7 |
ibmringFilterInTableTable of ring number filtering information
for incoming frames. SEQUENCE OF RingFilterInEntry .1.3.6.1.4.1.2.6.2.7.4.2 |
ibmringFilterInEntryFiltering information for a single ring number
on a single interface. RingFilterInEntry .1.3.6.1.4.1.2.6.2.7.4.2.1 |
ibmringFilterInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.4.2.1.1 |
ibmringFilterInNumberIndicates which ring number to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.4.2.1.2 |
ibmringFilterInMaskMask to allow ibmringFilterInNumber to be used as a
range of values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.4.2.1.3 |
ibmringFilterOutTableTable of ring number filtering information
for outgoing frames. SEQUENCE OF RingFilterOutEntry .1.3.6.1.4.1.2.6.2.7.4.3 |
ibmringFilterOutEntryFiltering information for a single ring number
on a single interface. RingFilterOutEntry .1.3.6.1.4.1.2.6.2.7.4.3.1 |
ibmringFilterOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.4.3.1.1 |
ibmringFilterOutNumberIndicates which ring number to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.4.3.1.2 |
ibmringFilterOutMaskMask to allow ibmringFilterOutNumber to be used as a
range of values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.4.3.1.3 |
ibmbridgeHopCountFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.5 |
ibmhopCountFilterInfoTableTable of hop count filtering information. SEQUENCE OF HopCountFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.5.1 |
ibmhopCountFilterInfoEntryHop count filtering information for a single interface. HopCountFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.5.1.1 |
ibmhopCountFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.5.1.1.1 |
ibmhopCountFilterBcastTypeDetermines what type of incoming frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.5.1.1.2 |
ibmhopCountFilterCountThe number of hops allowed for incoming frames.ro INTEGER .1.3.6.1.4.1.2.6.2.7.5.1.1.3 |
ibmbridgeWindowFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.6 |
ibmwindowFilterInfoTableTable of Window filtering information. SEQUENCE OF WindowFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.6.1 |
ibmwindowFilterInfoEntryWindow filtering information for a single interface. WindowFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.6.1.1 |
ibmwindowFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.6.1.1.1 |
ibmwindowFilterInBcastTypeFor the incoming Window filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.6.1.1.2 |
ibmwindowFilterOutBcastTypeFor the outgoing Window filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.6.1.1.3 |
ibmwindowFilterInFilterTypeFor the incoming filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.6.1.1.4 |
ibmwindowFilterOutFilterTypeFor the outgoing filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.6.1.1.5 |
ibmwindowFilterInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.6.1.1.6 |
ibmwindowFilterOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.6.1.1.7 |
ibmwindowFilterTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.6.1.1.8 |
ibmwindowFilterInTableTable of Window filtering information
for incoming frames. SEQUENCE OF WindowFilterInEntry .1.3.6.1.4.1.2.6.2.7.6.2 |
ibmwindowFilterInEntryFiltering information for incoming frames. WindowFilterInEntry .1.3.6.1.4.1.2.6.2.7.6.2.1 |
ibmwindowFilterInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.6.2.1.1 |
ibmwindowFilterInContentsString of bytes that will be compared with bytes in the
frame.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.2.1.2 |
ibmwindowFilterInMaskStringString of bytes that will be masked with bytes in the
contents field.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.2.1.3 |
ibmwindowFilterInOffsetStartDetermines the starting point where the contents field should be
applied. A value of 'MAC' means the base is at the beginning of
the destination MAC address field, whereas, a value of 'SAP' means
it is applied at the beginning of the destination SAP field.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.7.6.2.1.4 |
ibmwindowFilterInNumBytesNumber of bytes in the contents field that are used
for filtering.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.2.1.5 |
ibmwindowFilterInOffsetNumber of bytes offset into the frame from the offset start point
to begin the compare.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.2.1.6 |
ibmwindowFilterInIdA unique identifier associated with this window filter
entry.ro INTEGER .1.3.6.1.4.1.2.6.2.7.6.2.1.7 |
ibmwindowFilterInTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.6.2.1.8 |
ibmwindowFilterOutTableTable of Window filtering information
for outgoing frames. SEQUENCE OF WindowFilterOutEntry .1.3.6.1.4.1.2.6.2.7.6.3 |
ibmwindowFilterOutEntryFiltering information for outgoing frames. WindowFilterOutEntry .1.3.6.1.4.1.2.6.2.7.6.3.1 |
ibmwindowFilterOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.6.3.1.1 |
ibmwindowFilterOutContentsString of bytes that will be compared with bytes in the
frame.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.3.1.2 |
ibmwindowFilterOutMaskStringString of bytes that will be masked with bytes in the
contents field.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.3.1.3 |
ibmwindowFilterOutOffsetStartDetermines the starting point where the contents field should be
applied. A value of 'MAC' means the base is at the beginning of
the destination MAC address field, whereas, a value of 'SAP' means
it is applied at the beginning of the destination SAP field.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.7.6.3.1.4 |
ibmwindowFilterOutNumBytesNumber of bytes in the contents field that are used
for filtering.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.3.1.5 |
ibmwindowFilterOutOffsetNumber of bytes offset into the frame from the offset start point
to begin the compare.ro OCTET STRING .1.3.6.1.4.1.2.6.2.7.6.3.1.6 |
ibmwindowFilterOutIdA unique identifier associated with this window filter
entry.ro INTEGER .1.3.6.1.4.1.2.6.2.7.6.3.1.7 |
ibmwindowFilterOutTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.6.3.1.8 |
ibmbridgeFiltOrderTable OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.7 |
ibmFiltOrderInTableTable of information describing which order
the filters are applied for incoming frames. SEQUENCE OF FiltOrderInEntry .1.3.6.1.4.1.2.6.2.7.7.1 |
ibmFiltOrderInEntryFilter order information for incoming frames. FiltOrderInEntry .1.3.6.1.4.1.2.6.2.7.7.1.1 |
ibmFiltOrderInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.7.1.1.1 |
ibmFiltOrderInPriorityThe priority of when a filter is applied to an incoming
frame. A value of 1 signifies that it is applied first.ro INTEGER .1.3.6.1.4.1.2.6.2.7.7.1.1.2 |
ibmFiltOrderInNameThe name of the filter applied to incoming frames
that is associated with the priority, ibmFiltOrderInPriority.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.7.7.1.1.3 |
ibmFiltOrderInTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.7.1.1.4 |
ibmFiltOrderOutTableTable of information describing which order
the filters are applied for outgoing frames. SEQUENCE OF FiltOrderOutEntry .1.3.6.1.4.1.2.6.2.7.7.2 |
ibmFiltOrderOutEntryFilter order information for outgoing frames. FiltOrderOutEntry .1.3.6.1.4.1.2.6.2.7.7.2.1 |
ibmFiltOrderOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.7.2.1.1 |
ibmFiltOrderOutPriorityThe priority of when a filter is applied to an outgoing
frame. A value of 1 signifies that it is applied first.ro INTEGER .1.3.6.1.4.1.2.6.2.7.7.2.1.2 |
ibmFiltOrderOutNameThe name of the filter applied to outgoing frames
that is associated with the priority, ibmFiltOrderOutPriority.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.7.7.2.1.3 |
ibmFiltOrderOutTypeThe type of entry, either sr or tb.ro Enumeration .1.3.6.1.4.1.2.6.2.7.7.2.1.4 |
ibmbridgeRIFFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.7.8 |
ibmRIFFilterInfoTableTable of routing information field filtering information. SEQUENCE OF RIFFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.8.1 |
ibmRIFFilterInfoEntryRouting information field filtering information for a single interface. RIFFilterInfoEntry .1.3.6.1.4.1.2.6.2.7.8.1.1 |
ibmRIFFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.1.1.1 |
ibmRIFFilterInBcastTypeFor the incoming routing information field filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.8.1.1.2 |
ibmRIFFilterOutBcastTypeFor the outgoing routing information field filter table, determines
what type of frames will be filtered.ro Enumeration .1.3.6.1.4.1.2.6.2.7.8.1.1.3 |
ibmRIFFilterInFilterTypeFor the incoming routing information filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.8.1.1.4 |
ibmRIFFilterOutFilterTypeFor the outgoing routing information field filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.7.8.1.1.5 |
ibmRIFFilterInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.8.1.1.6 |
ibmRIFFilterOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.7.8.1.1.7 |
ibmRIFFilterInTableTable of routing information field filtering information
for incoming frames. SEQUENCE OF RIFFilterInEntry .1.3.6.1.4.1.2.6.2.7.8.2 |
ibmRIFFilterInEntryFiltering information for a single routing information
field on a single interface. RIFFilterInEntry .1.3.6.1.4.1.2.6.2.7.8.2.1 |
ibmRIFFilterInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.2.1.1 |
ibmRIFFilterInRingNumberIndicates which ring number to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.2.1.2 |
ibmRIFFilterInRingMaskMask to allow ibmRIFFilterInRingNumber to be used as a
range of values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.2.1.3 |
ibmRIFFilterInBridgeNumberIndicates which bridge number to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.2.1.4 |
ibmRIFFilterInBridgeMaskMask to allow ibmRIFFilterInBridgeNumber to be used as a
range of values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.2.1.5 |
ibmRIFFilterInRouteDesignatorIndicates which route designators in the routing information
field are to be used for filtering.ro Enumeration .1.3.6.1.4.1.2.6.2.7.8.2.1.6 |
ibmRIFFilterOutTableTable of routing information field filtering information
for outgoing frames. SEQUENCE OF RIFFilterOutEntry .1.3.6.1.4.1.2.6.2.7.8.3 |
ibmRIFFilterOutEntryFiltering information for a single routing information
field on a single interface. RIFFilterOutEntry .1.3.6.1.4.1.2.6.2.7.8.3.1 |
ibmRIFFilterOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.3.1.1 |
ibmRIFFilterOutRingNumberIndicates which ring number to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.3.1.2 |
ibmRIFFilterOutRingMaskMask to allow ibmRIFFilterOutRingNumber to be used as a
range of values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.3.1.3 |
ibmRIFFilterOutBridgeNumberIndicates which bridge number to filter.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.3.1.4 |
ibmRIFFilterOutBridgeMaskMask to allow ibmRIFFilterOutBridgeNumber to be used as a
range of values.ro INTEGER .1.3.6.1.4.1.2.6.2.7.8.3.1.5 |
ibmRIFFilterOutRouteDesignatorIndicates which route designators in the routing information
field are to be used for filtering.ro Enumeration .1.3.6.1.4.1.2.6.2.7.8.3.1.6 |
ibmfr OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.8 |
ibmfrDlcmiTableThe Parameters for the Data Link Connection Management
Interface corresponding to any given ifEntry. Unknown .1.3.6.1.4.1.2.6.2.8.1 |
ibmfrDlcmiEntryThe Parameters for the Data Link Connection
Management Interface. IbmfrDlcmiEntry .1.3.6.1.4.1.2.6.2.8.1.1 |
ibmfrDlcmiIfIndexThe ifIndex value of the corresponding ifEn-
try.ro INTEGER -- 1..ifNumber .1.3.6.1.4.1.2.6.2.8.1.1.1 |
ibmfrDlcmiStateThis variable states which Data Link Connec-
tion Management scheme is active (and by impli-
cation, what DLCI it uses) on the Frame Relay
interface.ro Enumeration .1.3.6.1.4.1.2.6.2.8.1.1.2 |
ibmfrDlcmiAddressThis variable states which address format is
in use on the Frame Relay interface.ro Enumeration .1.3.6.1.4.1.2.6.2.8.1.1.3 |
ibmfrDlcmiAddressLenThis variable states which address length in
octets. In the case of Q922 format, the length
indicates the entire length of the address in-
cluding the control portion.ro Enumeration .1.3.6.1.4.1.2.6.2.8.1.1.4 |
ibmfrDlcmiPollingIntervalThis is the number of seconds between succes-
sive status enquiry messages.ro INTEGER .1.3.6.1.4.1.2.6.2.8.1.1.5 |
ibmfrDlcmiFullEnquiryIntervalNumber of status enquiry intervals that pass
before issuance of a full status enquiry mes-
sage.ro INTEGER .1.3.6.1.4.1.2.6.2.8.1.1.6 |
ibmfrDlcmiErrorThresholdThis is the maximum number of unanswered
Status Enquiries the equipment shall accept be-
fore declaring the interface down.ro INTEGER .1.3.6.1.4.1.2.6.2.8.1.1.7 |
ibmfrDlcmiMonitoredEventsThis is the maximum number of responses to
FULL STATUS or LINK INTEGERITY VERIFICATION
messages missed before the device will mark the
interface down.ro INTEGER .1.3.6.1.4.1.2.6.2.8.1.1.8 |
ibmfrDlcmiMaxSupportedVCsThe maximum number of Virtual Circuits allowed
for this interface. Usually dictated by the
Frame Relay network.
In response to a SET, if a value less than zero
or higher than the agent's maximal capability
is configured, the agent should respond bad-
Valuero INTEGER .1.3.6.1.4.1.2.6.2.8.1.1.9 |
ibmfrDlcmiMulticastThis indicates whether the Frame Relay provid-
er offers a Multicast Service.ro Enumeration .1.3.6.1.4.1.2.6.2.8.1.1.10 |
ibmfrCircuitTableA table containing information about specific Data
Link Connection Identifiers and corresponding virtual
circuits. SEQUENCE OF IbmfrCircuitEntry .1.3.6.1.4.1.2.6.2.8.2 |
ibmfrCircuitEntryThe information regarding a single Data Link
Connection Identifier. IbmfrCircuitEntry .1.3.6.1.4.1.2.6.2.8.2.1 |
ibmfrCircuitIfIndexThe ifIndex Value of the ifEntry this virtual
circuit is layered onto.ro INTEGER -- 1..ifNumber .1.3.6.1.4.1.2.6.2.8.2.1.1 |
ibmfrCircuitDlciThe Data Link Connection Identifier for this
virtual circuit.ro INTEGER .1.3.6.1.4.1.2.6.2.8.2.1.2 |
ibmfrCircuitStateIndicates whether the particular virtual cir-
cuit is operational. In the absence of a Data
Link Connection Management Interface, virtual
circuit entries (rows) may be created by set-
ting virtual circuit state to active, or delet-
ed by changing Circuit state to deleted.
Whether or not the row actually disappears is
let to the implementation, so this object may
actually read as 'invalid' for some arbitrary
length of time. It is also legal to set the
state of a virtual circuit to inactive to tem-
porarily disable a given circuit.ro Enumeration .1.3.6.1.4.1.2.6.2.8.2.1.3 |
ibmfrCircuitReceivedFECNsNumber of frames received from the network in-
dicating forward congestion since the virtual
circuit was created.ro Counter .1.3.6.1.4.1.2.6.2.8.2.1.4 |
ibmfrCircuitReceivedBECNsNumber of frames received from the network in-
dicating backward congestion since the virtual
circuit was created.ro Counter .1.3.6.1.4.1.2.6.2.8.2.1.5 |
ibmfrCircuitSentFramesThe number of frames sent from this virtual
circuit since it was created.ro Counter .1.3.6.1.4.1.2.6.2.8.2.1.6 |
ibmfrCircuitSentOctetsThe number of octets sent from this virtual
circuit since it was created.ro Counter .1.3.6.1.4.1.2.6.2.8.2.1.7 |
ibmfrCircuitReceivedFramesNumber of frames received over this virtual
circuit since it was created.ro Counter .1.3.6.1.4.1.2.6.2.8.2.1.8 |
ibmfrCircuitReceivedOctetsNumber of octets received over this virtual
circuit since it was created.ro Counter .1.3.6.1.4.1.2.6.2.8.2.1.9 |
ibmfrCircuitCreationTimeThe time when this virtual circuit
was created, whether by the Data Link Connection
Management Interface or by a SetRequest.
The time value is relative to other
times on this interface only.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.8.2.1.10 |
ibmfrCircuitLastTimeChangeThe time when last there was a
change in the virtual circuit state.
The time value is relative to other
times on this interface only.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.8.2.1.11 |
ibmfrCircuitCommittedBurstThis variable indicates the maximum amount of
data, in bits, that the network agrees to
transfer under normal conditions, during the
measurement interval.ro INTEGER .1.3.6.1.4.1.2.6.2.8.2.1.12 |
ibmfrCircuitExcessBurstThis variable indicates the maximum amount of
uncommitted data bits that the network will at-
tempt to deliver over the measurement interval.
By default, if not configured when creating the
entry, the Excess Information Burst Size is set
to the value of ifSpeed.ro INTEGER .1.3.6.1.4.1.2.6.2.8.2.1.13 |
ibmfrCircuitThroughputThroughput is the average number of 'Frame Re-
lay Information Field' bits transferred per
second across a user network interface in one
direction, measured over the measurement inter-
val.
If the configured committed burst rate and
throughput are both non-zero, the measurement
interval
T=ibmfrCircuitCommittedBurst/ibmfrCircuitThroughput.
If the configured committed burst rate and
throughput are both zero, the measurement in-
terval
T=ibmfrCircuitExcessBurst/ifSpeed.ro INTEGER .1.3.6.1.4.1.2.6.2.8.2.1.14 |
ibmfrErrTableA table containing information about Errors on the
Frame Relay interface. SEQUENCE OF IbmfrErrEntry .1.3.6.1.4.1.2.6.2.8.3 |
ibmfrErrEntryThe error information for a single frame relay
interface. IbmfrErrEntry .1.3.6.1.4.1.2.6.2.8.3.1 |
ibmfrErrIfIndexThe ifIndex Value of the corresponding ifEn-
try.ro INTEGER -- 1..ifNumber .1.3.6.1.4.1.2.6.2.8.3.1.1 |
ibmfrErrTypeThe type of error that was last seen on this
interface.ro Enumeration .1.3.6.1.4.1.2.6.2.8.3.1.2 |
ibmfrErrDataAn octet string containing as much of the er-
ror packet as possible. As a minimum, it must
contain the Q.922 Address or as much as was
delivered. It is desirable to include all in-
formation up to the PDU.ro OCTET STRING .1.3.6.1.4.1.2.6.2.8.3.1.3 |
ibmfrErrTimeThe time at which the error was detected.
The time value is relative to other
times on this interface only.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.8.3.1.4 |
ibmdls OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.9 |
ibmdlsVirtualRingSegmentNumberThe token ring segment number used in all frames passed
to or from the IBM 6611 Data Link Switching function.ro Unknown .1.3.6.1.4.1.2.6.2.9.1 |
ibmdlsFrameFilterTypeThe type of SNA filtering applied using the
ibmdlsLocalFrameFilterTable and ibmdlsRemoteFrameFilterTable.
If this field = permit(2), then all filters defined
for SNA use the action of permitting frames to be
forwarded if they meet the criteria given by the
source and destination address values.
If this field = deny(1), then all filters defined
for SNA use the action of denying frames to be
forwarded if they meet the criteria given
by the source and destination address values.ro Enumeration .1.3.6.1.4.1.2.6.2.9.2 |
ibmdlsNameFilterTypeThe type of NetBIOS filtering applied using the
ibmdlsLocalNameFilterTable and ibmdlsRemoteNameFilterTable.
If this field = permit(2), then all filters defined
for NetBIOS use the action of permitting frames
to be forwarded if they meet the criteria given
by the source and destination address values.
If this field = deny(1), then all filters defined
for NetBIOS use the action of denying frames
to be forwarded if they meet the criteria given
by the source and destination address values.ro Enumeration .1.3.6.1.4.1.2.6.2.9.3 |
ibmdlsRouterTableA table of information regarding all routers
participating in Data Link Switching. SEQUENCE OF IbmdlsRouterEntry .1.3.6.1.4.1.2.6.2.9.4 |
ibmdlsRouterEntryInformation for a single participating router. IbmdlsRouterEntry .1.3.6.1.4.1.2.6.2.9.4.1 |
ibmdlsRouterAddressThe IP address of the router participating in Data
Link Switching.ro IpAddress .1.3.6.1.4.1.2.6.2.9.4.1.1 |
ibmdlsRouterStatusThe current state of the remote connectionro Enumeration .1.3.6.1.4.1.2.6.2.9.4.1.2 |
ibmdlsRouterDefinedByThe origin of this entry. user(1) indicates that
this router is defined via the Configuration Program.
system(2) indicates that this router was defined
automatically as a result of a connection request from
another router.ro Enumeration .1.3.6.1.4.1.2.6.2.9.4.1.3 |
ibmdlsRouterInFramesNumber of frames received from the partner router.ro Counter .1.3.6.1.4.1.2.6.2.9.4.1.4 |
ibmdlsRouterOutFramesNumber of frames sent to the partner router.ro Counter .1.3.6.1.4.1.2.6.2.9.4.1.5 |
ibmdlsLocalFrameFilterTableThe SNA local frame filter table. This table contains
information regarding the filtering of SNA frames received
from local LAN segments. SEQUENCE OF IbmdlsLocalFrameFilterEntry .1.3.6.1.4.1.2.6.2.9.5 |
ibmdlsLocalFrameFilterEntryFilter information for a MAC address source-destination pair. IbmdlsLocalFrameFilterEntry .1.3.6.1.4.1.2.6.2.9.5.1 |
ibmdlsLocalFrameFilterIDA unique identifier for this filter.ro INTEGER .1.3.6.1.4.1.2.6.2.9.5.1.1 |
ibmdlsLocalFrameFilterSrcAddressThe source MAC address that this filter is
applied to.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.5.1.2 |
ibmdlsLocalFrameFilterSrcMaskA mask indicating the bits of the source address
considered significant when using the filter.
For every bit equal to one in the mask, the same bit
in the source address is considered significant.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.5.1.3 |
ibmdlsLocalFrameFilterDestAddressThe destination MAC address that this filter is
applied to.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.5.1.4 |
ibmdlsLocalFrameFilterDestMaskA mask indicating the bits of the destination address
considered significant when using the filter.
For every bit equal to one in the mask, the same bit
in the destination address is considered significant.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.5.1.5 |
ibmdlsRemoteFrameFilterTableThe SNA remote frame filter table. This table contains
information regarding the filtering of SNA frames received
from other participating DLS routers. SEQUENCE OF IbmdlsRemoteFrameFilterEntry .1.3.6.1.4.1.2.6.2.9.6 |
ibmdlsRemoteFrameFilterEntryFilter information for a MAC address source-destination pair. IbmdlsRemoteFrameFilterEntry .1.3.6.1.4.1.2.6.2.9.6.1 |
ibmdlsRemoteFrameFilterIDA unique identifier for this filter.ro INTEGER .1.3.6.1.4.1.2.6.2.9.6.1.1 |
ibmdlsRemoteFrameFilterSrcAddressThe source MAC address that this filter is
applied to.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.6.1.2 |
ibmdlsRemoteFrameFilterSrcMaskA mask indicating the bits of the source address
considered significant when using the filter.
For every bit equal to one in the mask, the same bit
in the source address is considered significant.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.6.1.3 |
ibmdlsRemoteFrameFilterDestAddressThe destination MAC address that this filter is
applied to.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.6.1.4 |
ibmdlsRemoteFrameFilterDestMaskA mask indicating the bits of the destination address
considered significant when using the filter.
For every bit equal to one in the mask, the same bit
in the destination address is considered significant.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.6.1.5 |
ibmdlsLocalNameFilterTableThe NetBIOS local name filter table. This table contains
information regarding the filtering of NetBIOS frames
received from local LAN segments. SEQUENCE OF IbmdlsLocalNameFilterEntry .1.3.6.1.4.1.2.6.2.9.7 |
ibmdlsLocalNameFilterEntryFilter information for a NetBIOS source-destination
name pair. IbmdlsLocalNameFilterEntry .1.3.6.1.4.1.2.6.2.9.7.1 |
ibmdlsLocalNameFilterIDA unique identifier for this filter.ro INTEGER .1.3.6.1.4.1.2.6.2.9.7.1.1 |
ibmdlsLocalNameFilterSrcAddressThe source NetBIOS name that this filter is
applied to.ro DisplayString .1.3.6.1.4.1.2.6.2.9.7.1.2 |
ibmdlsLocalNameFilterDestAddressThe destination NetBIOS name that this filter is
applied to.ro DisplayString .1.3.6.1.4.1.2.6.2.9.7.1.3 |
ibmdlsRemoteNameFilterTableThe NetBIOS name filter table. This table contains
information regarding the filtering of NetBIOS frames
received from other participating DLS routers. SEQUENCE OF IbmdlsRemoteNameFilterEntry .1.3.6.1.4.1.2.6.2.9.8 |
ibmdlsRemoteNameFilterEntryFilter information for a NetBIOS source-destination
name pair. IbmdlsRemoteNameFilterEntry .1.3.6.1.4.1.2.6.2.9.8.1 |
ibmdlsRemoteNameFilterIDA unique identifier for this filter.ro INTEGER .1.3.6.1.4.1.2.6.2.9.8.1.1 |
ibmdlsRemoteNameFilterSrcAddressThe source NetBIOS name that this filter is
applied to.ro DisplayString .1.3.6.1.4.1.2.6.2.9.8.1.2 |
ibmdlsRemoteNameFilterDestAddressThe destination NetBIOS name that this filter is
applied to.ro DisplayString .1.3.6.1.4.1.2.6.2.9.8.1.3 |
ibmdlsDefaultDestTableTable of default routers for MAC addresses. SEQUENCE OF IbmdlsDefaultDestEntry .1.3.6.1.4.1.2.6.2.9.9 |
ibmdlsDefaultDestEntryMapping of a MAC address to a default router. IbmdlsDefaultDestEntry .1.3.6.1.4.1.2.6.2.9.9.1 |
ibmdlsDefaultDestAddressThe destination address that this table entry applies
to.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.9.1.1 |
ibmdlsDefaultRouterAddressThe default router used for reaching the destination
address in ibmdlsDefaultDestAddress.ro IpAddress .1.3.6.1.4.1.2.6.2.9.9.1.2 |
ibmdlsDefaultNBDestTableTable of default routers for NetBIOS names. SEQUENCE OF IbmdlsDefaultNBDestEntry .1.3.6.1.4.1.2.6.2.9.10 |
ibmdlsDefaultNBDestEntryMapping of a NetBIOS name to a default router. IbmdlsDefaultNBDestEntry .1.3.6.1.4.1.2.6.2.9.10.1 |
ibmdlsDefaultNBDestNameThe destination NetBIOS name that this table entry
applies to.ro DisplayString .1.3.6.1.4.1.2.6.2.9.10.1.1 |
ibmdlsDefaultNBRouterAddressThe default router used for reaching the destination
name in ibmdlsDefaultNBDestName.ro IpAddress .1.3.6.1.4.1.2.6.2.9.10.1.2 |
ibmdlsStationTableTable of configuration information on SNA stations
attached to this router. SEQUENCE OF IbmdlsStationEntry .1.3.6.1.4.1.2.6.2.9.11 |
ibmdlsStationEntryInformation on a single SNA station attached to this router. IbmdlsStationEntry .1.3.6.1.4.1.2.6.2.9.11.1 |
ibmdlsStationIfIndexThe value of IfIndex for the port to which this station
is attached.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.1 |
ibmdlsStationAddressThe SDLC address of this station.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.2 |
ibmdlsStationTransmitWindowCountThe number of SDLC information frames to send to this
station before turning the line around to get a response.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.3 |
ibmdlsStationRetransmitCountThe number of contiguous information frame bursts that
will be transmitted to this station before declaring a
permanent transmission error.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.4 |
ibmdlsStationRetransmitThresholdThe number of information frame transmissions allowed as
a percentage of total information frame transmissions.
The specified rate is the maximum rate of retransmissions
allowed above which an error log entry will be make.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.5 |
ibmdlsStationForceDisconnectTimeoutThe number of seconds that the IBM 6611 will wait after
requesting a disconnect from the link (DISC) before forcing
a disconnect.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.6 |
ibmdlsStationMaxIfieldSizeThe value in bytes of the maximum I-field size
(a multiple of 256 plus 9).ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.7 |
ibmdlsStationPrimaryRepollTimeoutThe length of time (in tenths of seconds) that the primary
station will wait for a response from the secondary station.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.8 |
ibmdlsStationPrimaryRepollCountThe number of times that the primary station will poll
the secondary station unsuccessfully before marking the
station as not working.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.9 |
ibmdlsStationPrimaryRepollThresholdThe number of repolls as a percentage of the total polls
sent to the secondary station. The specified percentage equals
the maximum rate of repolls allowed, above which the IBM 6611
declares that a temporary error has occurred and logs an
entry in the system error log.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.10 |
ibmdlsStationPrimarySlowListTimeoutThe number of seconds that the primary station will wait
between polls to stations on the slow list.ro INTEGER .1.3.6.1.4.1.2.6.2.9.11.1.11 |
ibmdlsStationSrcAddressThe token ring physical address used for this station.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.11.1.12 |
ibmdlsStationDestAddressThe token ring physical address to which this station
should be connected. If this information is not
available the IBM 6611 Network Processor will return
a length of zero for this object.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.11.1.13 |
ibmdlsCirTableTable of information on DLS circuits active on this router. SEQUENCE OF IbmdlsCirEntry .1.3.6.1.4.1.2.6.2.9.12 |
ibmdlsCirEntryInformation on a DLS circuit. IbmdlsCirEntry .1.3.6.1.4.1.2.6.2.9.12.1 |
ibmdlsCirIfIndexThe value of IfIndex for the interface supporting this
circuit.ro INTEGER .1.3.6.1.4.1.2.6.2.9.12.1.1 |
ibmdlsCirSrcAddressThe MAC address of the source of this circuit.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.12.1.2 |
ibmdlsCirSrcSapThe SAP identifier of the source of this circuit.ro INTEGER .1.3.6.1.4.1.2.6.2.9.12.1.3 |
ibmdlsCirDestAddressThe MAC address of the destination of this circuit.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.12.1.4 |
ibmdlsCirDestSapThe SAP identifier of the destination of this circuit.ro INTEGER .1.3.6.1.4.1.2.6.2.9.12.1.5 |
ibmdlsCirPartnerRouterAddressThe IP address of the partner router used by
this circuit.ro IpAddress .1.3.6.1.4.1.2.6.2.9.12.1.6 |
ibmdlsCirLocalLinkStateThe state of the local link station used by
this circuit.ro Enumeration .1.3.6.1.4.1.2.6.2.9.12.1.7 |
ibmdlsCirLocalLinkSubStateThe sub-state of the local link station used by
this circuit.ro Enumeration .1.3.6.1.4.1.2.6.2.9.12.1.8 |
ibmdlsCirLocalLinkRoutingThe routing information field used by the
local link portion of this circuit. The routing
information field consists of a 2-byte routing
control field and up to eight 2-byte route
designators.ro OCTET STRING .1.3.6.1.4.1.2.6.2.9.12.1.9 |
ibmdlsCirLocalLinkTestCmdsSentThe number of test commands sent by the
local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.10 |
ibmdlsCirLocalLinkTestCmdsFailThe number of test commands failed by the
local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.11 |
ibmdlsCirLocalLinkTestCmdsRcvThe number of test commands received by the
local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.12 |
ibmdlsCirLocalLinkDataPktSentThe number of sequenced data packets sent
by the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.13 |
ibmdlsCirLocalLinkDataPktResentThe number of sequenced data packets resent by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.14 |
ibmdlsCirLocalLinkMaxContResentThe maximum number of contiguous resendings by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.15 |
ibmdlsCirLocalLinkDataPktRcvThe number of sequenced data packets received
by the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.16 |
ibmdlsCirLocalLinkInvalidPktRcvThe number of invalid packets received by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.17 |
ibmdlsCirLocalLinkAdpRcvErrThe number of data-detected receive errors by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.18 |
ibmdlsCirLocalLinkAdpSendErrThe number of data-detected transmit errors by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.19 |
ibmdlsCirLocalLinkRcvInactiveTimeoutsThe number of inactivity timeouts received by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.20 |
ibmdlsCirLocalLinkCmdPollsSentThe number of command polls sent by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.21 |
ibmdlsCirLocalLinkCmdRepollsSentThe number of command repolls sent by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.22 |
ibmdlsCirLocalLinkCmdContRepollsThe number of continuous repolls sent by
the local link station used by this circuit.ro Counter .1.3.6.1.4.1.2.6.2.9.12.1.23 |
ibmdlsCirLocalAddressThe address (ibmdlsCirSrcAddress or
ibmdlsCirDestAddress) that is local
on this circuit.ro Enumeration .1.3.6.1.4.1.2.6.2.9.12.1.24 |
ibmppp OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.10 |
ibmpppLinkControlTableA table containing PPP-link specific control variables
for this managed object. An entry in this table is
uniquely identified by the ibmpppLinkControlIndex value
comprised by said entry. SEQUENCE OF IbmpppLinkControlEntry .1.3.6.1.4.1.2.6.2.10.1 |
ibmpppLinkControlEntryManagement control information about a particular PPP
Link. IbmpppLinkControlEntry .1.3.6.1.4.1.2.6.2.10.1.1 |
ibmpppLinkControlIndexA unique value for each PPP link. Its value ranges
between 1 and the value of ifNumber. The interface
identified by a particular value of this index is that
identified by the same value of an ifIndex object
instance. The value for each link must remain constant at
least from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.2.6.2.10.1.1.1 |
ibmpppLinkCRCSizeNumber of bits used in the CRC on this link. See section
3.1, 'Frame Check Sequence (FCS) Field' on page 5 of
RFC 1171. Setting this object to a new value will have
effect when this link is next restarted.ro Enumeration .1.3.6.1.4.1.2.6.2.10.1.1.2 |
ibmpppLinkRestartTimerValueThe value used for the Restart Timer. It is in units of
hundredths of a second. See section 4.3, 'Timers and
Counters' on page 20 of RFC 1171.ro INTEGER .1.3.6.1.4.1.2.6.2.10.1.1.3 |
ibmpppLinkMaxRestartsThe Max-Restarts parameter described in section 4.3,
'Timers and Counters' on page 20 of RFC 1171.ro INTEGER .1.3.6.1.4.1.2.6.2.10.1.1.4 |
ibmpppLinkLocalMRUThe MRU (Maximum Receive Unit) of this node on the link.
See section 2.1, page 2, 'Maximum Receive Unit' of
RFC 1172. Changing this object will have effect when
the link is next restarted.ro INTEGER .1.3.6.1.4.1.2.6.2.10.1.1.5 |
ibmpppLinkRemoteMRUWhat this node believes is the MRU for the node on the
other end of the link. See section 2.1, page 2, 'Maximum
Receive Unit' of RFC 1172. Changing this object will
immediately cause the local node to use the new MRU when
transmitting packets. If this number is increased, then
the sender MAY elect to use the new MRU. If the MRU is
decreased then the sender MUST use the new MRU.ro INTEGER .1.3.6.1.4.1.2.6.2.10.1.1.6 |
ibmpppLinkLocalACCMapThe (ACC) Asynchronous-Control-Character-Map for this
node. This is the ACC Map that the node on the other end
of the link will use when building a packet to send to
this node. See section 2.2, page 3, 'Async-Control-
Character-Map' of RFC 1172.
The IBM 6611 Network Processor always provides a
value of zero for this object.ro OCTET STRING .1.3.6.1.4.1.2.6.2.10.1.1.7 |
ibmpppLinkRemoteACCMapThe (ACC) Asynchronous-Control-Character-Map that this
node uses when building a packet to send to the node on
the other end of the link. See section 2.2, page 3,
'Async-Control-Character-Map' of RFC 1172.
The IBM 6611 Network Processor always provides a
value of zero for this object.ro OCTET STRING .1.3.6.1.4.1.2.6.2.10.1.1.8 |
ibmpppLinkMagicLoopCountThe number of times that this node will do a Magic Number
Configuration before deciding that the link is looped
back. 0 indicates that the node does not do Magic Number
Configuration. -1 indicates that it tries forever.
Changing this object takes effect the next time that the
link is restarted.ro INTEGER .1.3.6.1.4.1.2.6.2.10.1.1.9 |
ibmpppLinkCommandSee section 4.14 on page 13 of RFC 1171.
Reading from this variable will return no-op(1).
The IBM 6611 Network Processor always provides a
value of no-op(1) for this object.ro Enumeration .1.3.6.1.4.1.2.6.2.10.1.1.10 |
ibmpppLinkStatusTableA table containing PPP-link status specific information
for this managed object. An entry in this table is
uniquely identified by the ibmpppLinkStatusIndex value
comprised by said entry. SEQUENCE OF IbmpppLinkStatusEntry .1.3.6.1.4.1.2.6.2.10.2 |
ibmpppLinkStatusEntryStatus information about a particular PPP Link. IbmpppLinkStatusEntry .1.3.6.1.4.1.2.6.2.10.2.1 |
ibmpppLinkStatusIndexA unique value for each PPP link. Its value ranges
between 1 and the value of ifNumber. The interface
identified by a particular value of this index is that
identified by the same value of an ifIndex object
instance. The value for each link must remain constant at
least from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.2.6.2.10.2.1.1 |
ibmpppLinkVersionThe version of LCP that is being run over this link
(per RFC 1171). This value currently must be 1.ro INTEGER .1.3.6.1.4.1.2.6.2.10.2.1.2 |
ibmpppLinkCurrentStateThe current state of the link automaton. See section
4.1.3. 'State Transition Table' on page 13 of RFC 1171.ro Enumeration .1.3.6.1.4.1.2.6.2.10.2.1.3 |
ibmpppLinkPreviousStateThe immediately previous state of the link automaton. See
section 4.1.3. 'State Transition Table' on page 13 of
RFC 1171.ro Enumeration .1.3.6.1.4.1.2.6.2.10.2.1.4 |
ibmpppLinkChangeTimeThe value of sysUpTime when the state of the link
automaton last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.10.2.1.5 |
ibmpppLinkMagicNumberThis node's Magic Number. See section 2.4, page 7, 'Magic
Number' of RFC 1172.ro INTEGER .1.3.6.1.4.1.2.6.2.10.2.1.6 |
ibmpppLinkLocalQualityPeriodThis is the maximum interval at which this node will
transmit Link-Quality-Report Packets. See section 2.5, on
page 10 of RFC 1172. This object is in units of
microseconds.ro INTEGER .1.3.6.1.4.1.2.6.2.10.2.1.7 |
ibmpppLinkRemoteQualityPeriodThis is the maximum interval at which this node expects
that the other node will transmit Link-Quality-Report
Packets. See section 2.5, on page 10 of RFC 1172. This
object is in units of microseconds.ro INTEGER .1.3.6.1.4.1.2.6.2.10.2.1.8 |
ibmpppLinkProtocolCompressionIndicates the Protocol compression that has been
configured on the link. Receive-only(1) indicates that
this node can receive compressed packets but won't send
them. Send-only(2) indicates that this node will send
compressed packets but can not receive them.
Receive-and-send(3) indicates that the node will send and
can receive compressed packets. None(4) indicates that
this node will neither send nor receive compressed
packets. See section 2.6, on page 11 of RFC 1172.
The IBM 6611 Network Processor always provides a
value of none(4) for this object.ro Enumeration .1.3.6.1.4.1.2.6.2.10.2.1.9 |
ibmpppLinkACCompressionIndicates the Address/Control Field compression that has
been configured on the link. Receive-only(1) indicates
that this node can receive compressed packets but won't
send them. Send-only(2) indicates that this node will
send compressed packets but can not receive them.
Receive-and- send(3) indicates that the node will send
and can receive compressed packets. None(4) indicates
that this node will neither send nor receive compressed
packets. See section 2.7, on page 13 of RFC 1172.
The IBM 6611 Network Processor always provides a
value of none(4) for this object.ro Enumeration .1.3.6.1.4.1.2.6.2.10.2.1.10 |
ibmpppLinkMeasurementsValidThe current value of the Measurements-Valid state
variable used for Link-Quality Management. See section
3.5, page 19, of RFC 1172.ro INTEGER .1.3.6.1.4.1.2.6.2.10.2.1.11 |
ibmpppLinkQualityThe current quality of the link as declared by the nodes
Link-Quality Management modules. No effort is made to
define good or bad, nor the policy used to determine it.ro Enumeration .1.3.6.1.4.1.2.6.2.10.2.1.12 |
ibmpppLinkPhysicalA reference to MIB definitions specific to the particular
physical interface type (e.g. T1) being used by the PPP
Link. If the agent is unable to obtain this information,
the value of this object will be set to the OBJECT
IDENTIFIER { 0 0 }, which is a syntatically valid
object identifier, and any conformant
implementation of ASN.1 and BER must be able to
generate and recognize this value.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.10.2.1.13 |
ibmpppLinkErrorsTableA table containing PPP-link specific statistical
information for this managed object. An entry in this
table is uniquely identified by the ibmpppLinkErrorsIndex
value comprised by said entry. SEQUENCE OF IbmpppLinkErrorsEntry .1.3.6.1.4.1.2.6.2.10.3 |
ibmpppLinkErrorsEntryError information about a particular PPP Link. IbmpppLinkErrorsEntry .1.3.6.1.4.1.2.6.2.10.3.1 |
ibmpppLinkErrorsIndexA unique value for each PPP link. Its value ranges
between 1 and the value of ifNumber. The interface
identified by a particular value of this index is that
identified by the same value of an ifIndex object
instance. The value for each link must remain constant at
least from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.2.6.2.10.3.1.1 |
ibmpppLinkBadAddressesThe number of packets received with an incorrect Address
Field. See section 3.1, Page 5, 'Address Field' of RFC 1171.ro Counter .1.3.6.1.4.1.2.6.2.10.3.1.2 |
ibmpppLinkLastBadAddressThe most recent incorrect address received on this link.ro OCTET STRING .1.3.6.1.4.1.2.6.2.10.3.1.3 |
ibmpppLinkBadControlsThe number of packets received on this link with an
incorrect Control Field. See Section 3.1, Page 5, 'Flag
Sequence' of RFC 1171.ro Counter .1.3.6.1.4.1.2.6.2.10.3.1.4 |
ibmpppLinkLastBadControlThe most recent incorrect Control Field received on this
link.ro OCTET STRING .1.3.6.1.4.1.2.6.2.10.3.1.5 |
ibmpppLinkLastUnknownProtocolThe most recently received unknown Protocol. An unknown
Protocol is one which has a well-formed Protocol number,
but which the PPP implementation does not know how to
handle.ro OCTET STRING .1.3.6.1.4.1.2.6.2.10.3.1.6 |
ibmpppLinkInvalidProtocolsThe number of times that a packet has been received with
an invalid Protocol specified in the Protocol Field. An
invalid Protocol is one which does not conform to the
requirements of section 3.1, page 5 of RFC 1171.ro Counter .1.3.6.1.4.1.2.6.2.10.3.1.7 |
ibmpppLinkLastInvalidProtocolThe most recently received invalid Protocol.ro OCTET STRING .1.3.6.1.4.1.2.6.2.10.3.1.8 |
ibmpppLinkPacketTooLongsThe number of received packets that have been discarded
because their length exceeded the MRU.ro Counter .1.3.6.1.4.1.2.6.2.10.3.1.9 |
ibmpppLinkBadCRCsThe number of received packets that have been discarded
due to having an incorrect CRC.ro Counter .1.3.6.1.4.1.2.6.2.10.3.1.10 |
ibmpppLinkConfigTimeoutsThe number of Configure Request packets that have timed
out.ro Counter .1.3.6.1.4.1.2.6.2.10.3.1.11 |
ibmpppLinkTerminateTimeoutsThe number of Terminate Request packets that have timed
out.ro Counter .1.3.6.1.4.1.2.6.2.10.3.1.12 |
ibmpppLinkQualityTableA table containing PPP-link specific statistical
information for this managed object. An entry in this
table is uniquely identified by the ibmpppLinkQualityIndex
value comprised by said entry. SEQUENCE OF IbmpppLinkQualityEntry .1.3.6.1.4.1.2.6.2.10.4 |
ibmpppLinkQualityEntryLink Quality Management information about a particular
PPP Link. IbmpppLinkQualityEntry .1.3.6.1.4.1.2.6.2.10.4.1 |
ibmpppLinkQualityIndexA unique value for each PPP link. Its value ranges
between 1 and the value of ifNumber. The interface
identified by a particular value of this index is that
identified by the same value of an ifIndex object
instance. The value for each link must remain constant at
least from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.2.6.2.10.4.1.1 |
ibmpppLinkInTxLQRsThe current value of In-Tx-LQRs used in Link-Quality
Management. See section 3.5, page 19, of RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.2 |
ibmpppLinkInTxPacketsThe current value of the In-Tx-Packets counter used for
Link-Quality Management. See section 3.5, page 19, of
RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.3 |
ibmpppLinkLastOutTxPacketsThe current value of the Last-Out-Tx-Packets-Ctr counter
used bu Link-Quality Management. See section 3.5, page
19, of RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.4 |
ibmpppLinkInTxOctetsThe current value of the In-Tx-Octets counter used for
Link-Quality Management. See section 3.5, page 19, of
RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.5 |
ibmpppLinkLastOutTxOctetsThe current value of the Last-Out-Tx-Octets-Counter
counter used for Link-Quality Management. See section
3.5, page 19, of RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.6 |
ibmpppLinkInRxPacketsThe current value of the In-Rx-Packets counter used for
Link-Quality Management. See section 3.5, page 19, of
RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.7 |
ibmpppLinkLastInRxPacketsThe current value of the Last-In-Rx-Packets-Ctr counter
used for Link-Quality Management. See section 3.5, page
19, of RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.8 |
ibmpppLinkInRxOctetsThe current value of the In-Rx-Octets counter used for
Link-Quality Management. See section 3.5, page 19, of
RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.9 |
ibmpppLinkLastInRxOctetsThe current value of the Last-In-Rx-Octets-Ctr counter
used for Link-Quality Management. See section 3.5, page
19, of RFC 1172.ro Counter .1.3.6.1.4.1.2.6.2.10.4.1.10 |
ibmpppProtocolTables OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.10.5 |
ibmpppIPTableA table containing specific information for the running
of the IP over PPP in this managed object. An entry in
this table is uniquely identified by the ibmpppIPLinkNumber
value comprised by said entry. SEQUENCE OF IbmpppIPEntry .1.3.6.1.4.1.2.6.2.10.5.1 |
ibmpppIPEntryAll information pertinant to running the IP over a single
PPP link. IbmpppIPEntry .1.3.6.1.4.1.2.6.2.10.5.1.1 |
ibmpppIPLinkNumberThe value of ibmpppLinkIndex for the link over which this
instance of the IP is being run.ro INTEGER .1.3.6.1.4.1.2.6.2.10.5.1.1.1 |
ibmpppIPRejectsThe number of Protocol Reject Messages received when
attempting to send an IP packet over the link identified
by ibmpppIPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.1.1.2 |
ibmpppIPInPacketsThe number of IP packets received on the link identified
by ibmpppIPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.1.1.3 |
ibmpppIPInOctetsThe number of octets received in IP packets received on
the link identified by ibmpppIPLinkNumber. Only octets in
the PPP Information Field are counted. Octets inserted
for transparency are not counted. Padding octets are not
counted.ro Counter .1.3.6.1.4.1.2.6.2.10.5.1.1.4 |
ibmpppIPOutPacketsThe number of IP packets sent on the link identified by
ibmpppIPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.1.1.5 |
ibmpppIPOutOctetsThe number of octets all in IP Packets sent on the link
identified by ibmpppIPLinkNumber. Only octets in the PPP
Information Field are counted. Octets inserted for
transparency are not counted. Padding octets are not
counted.ro Counter .1.3.6.1.4.1.2.6.2.10.5.1.1.6 |
ibmpppIPCPTableA table containing specific information for the running
of the IPCP over PPP in this managed object. An entry in
this table is uniquely identified by the
ibmpppIPCPLinkNumber value comprised by said entry. SEQUENCE OF IbmpppIPCPEntry .1.3.6.1.4.1.2.6.2.10.5.2 |
ibmpppIPCPEntryAll information pertinant to running the IPCP over a
single PPP link. IbmpppIPCPEntry .1.3.6.1.4.1.2.6.2.10.5.2.1 |
ibmpppIPCPLinkNumberThe value of ibmpppLinkIndex for the link over which this
instance of the IPCP is being run.ro INTEGER .1.3.6.1.4.1.2.6.2.10.5.2.1.1 |
ibmpppIPCPRejectsThe number of Protocol Reject Messages received when
attempting to send an IPCP Packet over the link
identified by ibmpppIPCPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.2.1.2 |
ibmpppIPCPInPacketsThe number of IPCP packets received on the link
identified by ibmpppIPCPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.2.1.3 |
ibmpppIPCPInOctetsThe number of octets received in IPCP packets received on
the link identified by ibmpppIPCPLinkNumber. Only octets in
the PPP Information Field are counted. Octets inserted
for transparency are not counted. Padding octets are not
counted.ro Counter .1.3.6.1.4.1.2.6.2.10.5.2.1.4 |
ibmpppIPCPOutPacketsThe number of IPCP packets sent on the link identified by
ibmpppIPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.2.1.5 |
ibmpppIPCPOutOctetsThe number of octets all in IPCP packets sent on the link
identified by ibmpppIPCPLinkNumber. Only octets in the PPP
Information Field are counted. Octets inserted for
transparency are not counted. Padding octets are not
counted.ro Counter .1.3.6.1.4.1.2.6.2.10.5.2.1.6 |
ibmpppIPCPCompressionTypeThe compression type used on this link as defined in
section 5.2 of RFC 1172. The numerical values that this
object can be are the same as the numerical values that
are included in the IPCP compression option configuration
packets.
The IBM 6611 Network Processor always provides a
value of none(1) for this object.ro Enumeration .1.3.6.1.4.1.2.6.2.10.5.2.1.7 |
ibmpppLCPTableA table containing specific information for the running
of LCP over PPP in this managed object. An entry in this
table is uniquely identified by the ibmpppLCPLinkNumber
value comprised by said entry. SEQUENCE OF IbmpppLCPEntry .1.3.6.1.4.1.2.6.2.10.5.3 |
ibmpppLCPEntryAll information pertinant to running LCP over a single
PPP link. IbmpppLCPEntry .1.3.6.1.4.1.2.6.2.10.5.3.1 |
ibmpppLCPLinkNumberThe value of ibmpppLinkIndex for the link over which this
instance of LCP is being run.ro INTEGER .1.3.6.1.4.1.2.6.2.10.5.3.1.1 |
ibmpppLCPRejectsThe number of Protocol Reject Messages received when
attempting to send an LCP packet over the link identified
by ibmpppLCPLinkNumber. This really ought not to happen.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.2 |
ibmpppLCPInPacketsThe number of LCP packets received on the link identified
by ibmpppLCPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.3 |
ibmpppLCPInOctetsThe number of octets received in LCP packets received on
the link identified by ibmpppLCPLinkNumber. Only octets in
the PPP Information Field are counted. Octets inserted
for transparency are not counted. Padding octets are not
counted.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.4 |
ibmpppLCPOutPacketsThe number of LCP packets sent on the link identified by
ibmpppLCPLinkNumber.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.5 |
ibmpppLCPOutOctetsThe number of octets all in LCP packets sent on the link
identified by ibmpppLCPLinkNumber. Only octets in the PPP
Information Field are counted. Octets inserted for
transparency are not counted. Padding octets are not
counted.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.6 |
ibmpppLCPOutCRsNumber of Configuration Request packets sent on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.7 |
ibmpppLCPInCRsNumber of Configuration Request packets received on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.8 |
ibmpppLCPOutCAsNumber of Configuration Acknowledge packets sent on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.9 |
ibmpppLCPInCAsNumber of Configuration Acknowledge packets received on
this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.10 |
ibmpppLCPOutCNsNumber of Configuration NAK packets sent on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.11 |
ibmpppLCPInCNsNumber of Configuration NAK packets received on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.12 |
ibmpppLCPOutCRejsNumber of Configuration Reject packets sent on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.13 |
ibmpppLCPInCRejsNumber of Configuration Reject packets received on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.14 |
ibmpppLCPOutTRsNumber of Terminate Request packets sent on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.15 |
ibmpppLCPInTRsNumber of Terminate Request packets received on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.16 |
ibmpppLCPOutTAsNumber of Terminate Acknowledge packets sent on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.17 |
ibmpppLCPInTAsNumber of Terminate Acknowledge packets received on this
link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.18 |
ibmpppLCPOutCodeRejsNumber of Code Reject packets sent on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.19 |
ibmpppLCPInCodeRejsNumber of Code Reject packets received on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.20 |
ibmpppLCPOutEchoReqsNumber of Echo Request packets sent on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.21 |
ibmpppLCPInEchoReqsNumber of Echo Request packets received on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.22 |
ibmpppLCPOutEchoRepsNumber of Echo Reply packets sent on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.23 |
ibmpppLCPInEchoRepsNumber of Echo Reply packets received on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.24 |
ibmpppLCPOutDiscReqsNumber of Discard Request packets sent on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.25 |
ibmpppLCPInDiscReqsNumber of Discard Request packets received on this link.ro Counter .1.3.6.1.4.1.2.6.2.10.5.3.1.26 |
ibmxns OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.11 |
ibmxnsidpForwardingIndicates if this node is acting as an XNS router.ro Enumeration .1.3.6.1.4.1.2.6.2.11.1 |
ibmxnsConfigTableThe table of XNS configuration information gathered on a
per-interface basis. SEQUENCE OF IbmXnsConfigEntry .1.3.6.1.4.1.2.6.2.11.4 |
ibmxnsConfigEntryXNS configuration information for a single interface. IbmXnsConfigEntry .1.3.6.1.4.1.2.6.2.11.4.1 |
ibmxnsPortIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.11.4.1.1 |
ibmxnsPortStatusThe status of the XNS protocol stack on this interface.ro Enumeration .1.3.6.1.4.1.2.6.2.11.4.1.2 |
ibmxnsidpChecksumIndicates the type of checksumming being done by IDP.ro Enumeration .1.3.6.1.4.1.2.6.2.11.4.1.3 |
ibmxnsErrpActiveIndicates if this port is originating error protocol packets.ro Enumeration .1.3.6.1.4.1.2.6.2.11.4.1.4 |
ibmxnsLoopbackActiveIndicates if this port will use the hardware to loopback
locally addressed packets or return the packet to the
system via a software loopback.ro Enumeration .1.3.6.1.4.1.2.6.2.11.4.1.5 |
ibmxnsidpInReceivesTotal number of IDP datagrams received.ro Counter .1.3.6.1.4.1.2.6.2.11.5 |
ibmxnsidpBcastInReceivesNumber of IDP broadcast datagrams received.ro Counter .1.3.6.1.4.1.2.6.2.11.6 |
ibmxnsidpMcastInReceivesNumber of IDP multicast datagrams received.ro Counter .1.3.6.1.4.1.2.6.2.11.7 |
ibmxnsidpInDiscardsNumber of incoming IDP datagrams discarded due to lack
of resources.ro Counter .1.3.6.1.4.1.2.6.2.11.8 |
ibmxnsidpOutRequestsNumber of IDP datagrams generated by local IDP
user protocols. This counter does not include
any datagrams counted in ibmxnsidpForwDatagrams.ro Counter .1.3.6.1.4.1.2.6.2.11.11 |
ibmxnsidpBcastOutRequestsNumber of IDP broadcast datagrams generated by local IDP
user protocols. This counter does not include
any datagrams counted in ibmxnsidpForwDatagrams.ro Counter .1.3.6.1.4.1.2.6.2.11.12 |
ibmxnsidpMcastOutRequestsNumber of IDP multicast datagrams generated by
local IDP user protocols. This counter does not
include any datagrams counted in ibmxnsidpForwDatagrams.ro Counter .1.3.6.1.4.1.2.6.2.11.13 |
ibmxnsidpForwDatagramsNumber of IDP datagrams for which an attempt was made
to forward.ro Counter .1.3.6.1.4.1.2.6.2.11.14 |
ibmxnsidpOutDiscardsTotal number of outgoing IDP datagrams discarded.ro Counter .1.3.6.1.4.1.2.6.2.11.15 |
ibmxnsidpOutNoRoutesNumber of outgoing IDP datagrams discarded because
no route was available to the specified destination.ro Counter .1.3.6.1.4.1.2.6.2.11.16 |
ibmxnsidpRoutingDiscardsNumber of routing entries discarded even though they
were valid.ro Counter .1.3.6.1.4.1.2.6.2.11.17 |
ibmxnsidpZeroDirBcastNumber of IDP datagrams forwarded to the system due
to zeronet broadcast.ro Counter .1.3.6.1.4.1.2.6.2.11.19 |
ibmxnsidpTooSmallNumber of IDP datagrams with len < the size of an IDP header.ro Counter .1.3.6.1.4.1.2.6.2.11.20 |
ibmxnsidpBadLenNumber of IDP datagrams with
number of bytes in the packet less than the
number of bytes specified in the IDP header field.ro Counter .1.3.6.1.4.1.2.6.2.11.21 |
ibmxnsidpBadSumNumber of IDP datagrams with a bad checksumro Counter .1.3.6.1.4.1.2.6.2.11.22 |
ibmxnsidpBadTTLNumber of IDP datagrams with
TTL value > IDP maximum hopcount of 16.ro Counter .1.3.6.1.4.1.2.6.2.11.23 |
ibmxnsErrUnspecNumber of Error packets generated because an IDP
datagram was dropped for unspecified reasons.ro Counter .1.3.6.1.4.1.2.6.2.11.24 |
ibmxnsErrChecksumNumber of Error packets generated because an IDP
datagram was dropped due a bad checksum.ro Counter .1.3.6.1.4.1.2.6.2.11.25 |
ibmxnsErrUnreachNumber of Error packets generated because an IDP
datagram was dropped due to an unreachable host.ro Counter .1.3.6.1.4.1.2.6.2.11.26 |
ibmxnsErrTTLExpiredNumber of Error packets generated because an IDP
datagram was dropped because its time-to-live
counter had expired.ro Counter .1.3.6.1.4.1.2.6.2.11.27 |
ibmxnsErrTooBigNumber of Error packets generated because an IDP
datagram was dropped because it was too large
to be forwarded through this node.ro Counter .1.3.6.1.4.1.2.6.2.11.28 |
ibmxnsErrResourcesNumber of Error packets generated because an IDP
datagram was dropped due to lack of resources.ro Counter .1.3.6.1.4.1.2.6.2.11.29 |
ibmxnsErrCongWarnNumber of Error packets generated for congestion
warnings.ro Counter .1.3.6.1.4.1.2.6.2.11.30 |
ibmxnsErrCongDiscardNumber of Error packets generated for congestion
discards.ro Counter .1.3.6.1.4.1.2.6.2.11.31 |
ibmxnsErrSquelchedNumber of error packets that would have been generated,
except that the faulted datagram had one of the following
conditions:
- was sent as link layer broadcast
- NS destination was broadcast
- NS source was 0, loopback, or broadcastro Counter .1.3.6.1.4.1.2.6.2.11.32 |
ibmxnsErrOutMsgsTotal number of error packets generated.ro Counter .1.3.6.1.4.1.2.6.2.11.33 |
ibmxnsAddrTableThe XNS Address Table. SEQUENCE OF IbmXnsAddrEntry .1.3.6.1.4.1.2.6.2.11.34 |
ibmxnsAddrEntryAn entry in the XNS address table. IbmXnsAddrEntry .1.3.6.1.4.1.2.6.2.11.34.1 |
ibmxnsAddrAddressThe XNS address to which this entry's addressing
information pertains.ro OCTET STRING .1.3.6.1.4.1.2.6.2.11.34.1.1 |
ibmxnsAddrIfIndexThe interface index which identifies the
interface to which this entry is applicable.ro INTEGER .1.3.6.1.4.1.2.6.2.11.34.1.2 |
ibmxnsRouteTableThe XNS Route Table. SEQUENCE OF IbmXnsRouteEntry .1.3.6.1.4.1.2.6.2.11.35 |
ibmxnsRouteEntryAn entry in the XNS route table. IbmXnsRouteEntry .1.3.6.1.4.1.2.6.2.11.35.1 |
ibmxnsRouteDestThe desination network of this route.ro OCTET STRING .1.3.6.1.4.1.2.6.2.11.35.1.1 |
ibmxnsRouteIfIndexThe index value which identifies the local interface
through which the next hop of this route should be
reached.ro INTEGER .1.3.6.1.4.1.2.6.2.11.35.1.2 |
ibmxnsRouteNextHopThe XNS network address of the next hop of this route.ro OCTET STRING .1.3.6.1.4.1.2.6.2.11.35.1.3 |
ibmxnsRouteMetricThe hop count to the destination.ro INTEGER .1.3.6.1.4.1.2.6.2.11.35.1.4 |
ibmxnsRouteUseReference counter for this route.ro Counter .1.3.6.1.4.1.2.6.2.11.35.1.5 |
ibmxnsFilterTableThe XNS Filter Table. SEQUENCE OF IbmXnsFilterEntry .1.3.6.1.4.1.2.6.2.11.36 |
ibmxnsFilterEntryAn entry in the XNS filter table. IbmXnsFilterEntry .1.3.6.1.4.1.2.6.2.11.36.1 |
ibmxnsFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.11.36.1.1 |
ibmxnsFilterNumberA unique integer identifying this filter entry for this
interface.ro INTEGER .1.3.6.1.4.1.2.6.2.11.36.1.2 |
ibmxnsFilterValueAn octet string representing the IDP header information
required by this filter entry. Incoming IDP packets will
be bitwise ANDed with the value of ibmxnsFilterMask, and
if the result is equal to the value of this object, the
packet will be filtered according to the value of
ibmxnsFilterType.
The structure of an IDP header is as follows:
BIT16 checksum
BIT16 length
BIT8 transport control (ie. hop count)
BIT8 packet type
BIT32 destination network address
BIT48 destination host address
BIT16 destination socket
BIT32 source network address
BIT48 source host address
BIT16 source socketro OCTET STRING .1.3.6.1.4.1.2.6.2.11.36.1.3 |
ibmxnsFilterMaskAn octet string indicating the parts of the IDP header
relevant to this filter entry. This mask will be bitwise
ANDed with the IDP packet; if the result is equal to
the value of ibmxnsFilterValue, the packet will be filtered
according to the value of ibmxnsFilterType.ro OCTET STRING .1.3.6.1.4.1.2.6.2.11.36.1.4 |
ibmxnsFilterTypeDetermines whether this filter is a deny entry
or a permit entry.ro Enumeration .1.3.6.1.4.1.2.6.2.11.36.1.5 |
ibmxnsFilterHCCompareIndicates the relational association desired if filtering
is being done based on hop count. If filtering is not being
done based on hop count (that is, if the hop count portion
of ibmxnsFilterMask is 0) the value of this object will
be none(1).ro Enumeration .1.3.6.1.4.1.2.6.2.11.36.1.6 |
ibmxnsFilterUseUsage count for this filter entry.ro Counter .1.3.6.1.4.1.2.6.2.11.36.1.7 |
ibmipx OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.12 |
ibmipxidpForwardingIndicates if this node is acting as an IPX router.ro Enumeration .1.3.6.1.4.1.2.6.2.12.1 |
ibmipxConfigTableThe table of IPX configuration information gathered on a
per-interface basis. SEQUENCE OF IbmIpxConfigEntry .1.3.6.1.4.1.2.6.2.12.4 |
ibmipxConfigEntryIPX configuration information for a single interface. IbmIpxConfigEntry .1.3.6.1.4.1.2.6.2.12.4.1 |
ibmipxPortIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.12.4.1.1 |
ibmipxPortStatusThe status of the IPX protocol stack on this interface.ro Enumeration .1.3.6.1.4.1.2.6.2.12.4.1.2 |
ibmipxidpChecksumIndicates the type of checksumming being done by IDP.ro Enumeration .1.3.6.1.4.1.2.6.2.12.4.1.3 |
ibmipxLoopbackActiveIndicates if this port will use the hardware to loopback
locally addressed packets or return the packet to the
system via a software loopback.ro Enumeration .1.3.6.1.4.1.2.6.2.12.4.1.5 |
ibmipxidpInReceivesTotal number of IDP datagrams received.ro Counter .1.3.6.1.4.1.2.6.2.12.5 |
ibmipxidpBcastInReceivesNumber of IDP broadcast datagrams received.ro Counter .1.3.6.1.4.1.2.6.2.12.6 |
ibmipxidpInDiscardsNumber of incoming IDP datagrams discarded due to lack
of resources.ro Counter .1.3.6.1.4.1.2.6.2.12.8 |
ibmipxidpInAddrErrorsNumber of incoming IDP datagrams discarded because the
network portion of the address did not match the configured
address for this host.ro Counter .1.3.6.1.4.1.2.6.2.12.10 |
ibmipxidpOutRequestsNumber of IDP datagrams generated by local IDP
user protocols. This counter does not include
any datagrams counted in ibmipxidpForwDatagrams.ro Counter .1.3.6.1.4.1.2.6.2.12.11 |
ibmipxidpBcastOutRequestsNumber of IDP broadcast datagrams generated by local IDP
user protocols. This counter does not include
any datagrams counted in ibmipxidpForwDatagrams.ro Counter .1.3.6.1.4.1.2.6.2.12.12 |
ibmipxidpForwDatagramsNumber of IDP datagrams for which an attempt was made
to forward.ro Counter .1.3.6.1.4.1.2.6.2.12.14 |
ibmipxidpOutDiscardsTotal number of outgoing IDP datagrams discarded.ro Counter .1.3.6.1.4.1.2.6.2.12.15 |
ibmipxidpOutNoRoutesNumber of outgoing IDP datagrams discarded because
no route was available to the specified destination.ro Counter .1.3.6.1.4.1.2.6.2.12.16 |
ibmipxidpRoutingDiscardsNumber of routing entries discarded even though they
were valid.ro Counter .1.3.6.1.4.1.2.6.2.12.17 |
ibmipxidpZeroDirBcastNumber of IDP datagrams forwarded to the system due
to zeronet broadcast.ro Counter .1.3.6.1.4.1.2.6.2.12.19 |
ibmipxidpTooSmallNumber of IDP datagrams with len < the size of an IDP header.ro Counter .1.3.6.1.4.1.2.6.2.12.20 |
ibmipxidpBadLenNumber of IDP datagrams with
number of bytes in the packet less than the
number of bytes specified in the IDP header field.ro Counter .1.3.6.1.4.1.2.6.2.12.21 |
ibmipxidpBadSumNumber of IDP datagrams with a bad checksumro Counter .1.3.6.1.4.1.2.6.2.12.22 |
ibmipxidpBadTTLNumber of IDP datagrams with
TTL value > IDP maximum hopcount of 16.ro Counter .1.3.6.1.4.1.2.6.2.12.23 |
ibmipxAddrTableThe IPX Address Table. SEQUENCE OF IbmIpxAddrEntry .1.3.6.1.4.1.2.6.2.12.34 |
ibmipxAddrEntryAn entry in the IPX address table. IbmIpxAddrEntry .1.3.6.1.4.1.2.6.2.12.34.1 |
ibmipxAddrAddressThe IPX address to which this entry's addressing
information pertains.ro OCTET STRING .1.3.6.1.4.1.2.6.2.12.34.1.1 |
ibmipxAddrIfIndexThe interface index which identifies the
interface to which this entry is applicable.ro INTEGER .1.3.6.1.4.1.2.6.2.12.34.1.2 |
ibmipxRouteTableThe IPX Route Table. SEQUENCE OF IbmIpxRouteEntry .1.3.6.1.4.1.2.6.2.12.35 |
ibmipxRouteEntryAn entry in the IPX route table. IbmIpxRouteEntry .1.3.6.1.4.1.2.6.2.12.35.1 |
ibmipxRouteDestThe desination network of this route.ro OCTET STRING .1.3.6.1.4.1.2.6.2.12.35.1.1 |
ibmipxRouteIfIndexThe index value which identifies the local interface
through which the next hop of this route should be
reached.ro INTEGER .1.3.6.1.4.1.2.6.2.12.35.1.2 |
ibmipxRouteNextHopThe IPX network address of the next hop of this route.ro OCTET STRING .1.3.6.1.4.1.2.6.2.12.35.1.3 |
ibmipxRouteMetricThe hop count to the destination.ro INTEGER .1.3.6.1.4.1.2.6.2.12.35.1.4 |
ibmipxRouteUseReference counter for this route.ro Counter .1.3.6.1.4.1.2.6.2.12.35.1.5 |
ibmipxFilterTableThe IPX Filter Table. SEQUENCE OF IbmIpxFilterEntry .1.3.6.1.4.1.2.6.2.12.36 |
ibmipxFilterEntryAn entry in the IPX filter table. IbmIpxFilterEntry .1.3.6.1.4.1.2.6.2.12.36.1 |
ibmipxFilterIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.12.36.1.1 |
ibmipxFilterNumberA unique integer identifying this filter entry for this
interface.ro INTEGER .1.3.6.1.4.1.2.6.2.12.36.1.2 |
ibmipxFilterValueAn octet string representing the IDP header information
required by this filter entry. Incoming IDP packets will
be bitwise ANDed with the value of ibmipxFilterMask, and
if the result is equal to the value of this object, the
packet will be filtered according to the value of
ibmipxFilterType.
The structure of an IDP header is as follows:
BIT16 checksum
BIT16 length
BIT8 transport control (ie. hop count)
BIT8 packet type
BIT32 destination network address
BIT48 destination host address
BIT16 destination socket
BIT32 source network address
BIT48 source host address
BIT16 source socketro OCTET STRING .1.3.6.1.4.1.2.6.2.12.36.1.3 |
ibmipxFilterMaskAn octet string indicating the parts of the IDP header
relevant to this filter entry. This mask will be bitwise
ANDed with the IDP packet; if the result is equal to
the value of ibmipxFilterValue, the packet will be filtered
according to the value of ibmipxFilterType.ro OCTET STRING .1.3.6.1.4.1.2.6.2.12.36.1.4 |
ibmipxFilterTypeDetermines whether this filter is a deny entry
or a permit entry.ro Enumeration .1.3.6.1.4.1.2.6.2.12.36.1.5 |
ibmipxFilterHCCompareIndicates the relational association desired if filtering
is being done based on hop count. If filtering is not being
done based on hop count (that is, if the hop count portion
of ibmipxFilterMask is 0) the value of this object will
be none(1).ro Enumeration .1.3.6.1.4.1.2.6.2.12.36.1.6 |
ibmipxFilterUseUsage count for this filter entry.ro Counter .1.3.6.1.4.1.2.6.2.12.36.1.7 |
ibmipxsapStatInRequestsNumber of SAP requests received by this entity.ro Counter .1.3.6.1.4.1.2.6.2.12.37 |
ibmipxsapStatOutRequestsNumber of SAP requests sent by this entity.ro Counter .1.3.6.1.4.1.2.6.2.12.38 |
ibmipxsapStatInResponsesNumber of SAP responses received by this entity.ro Counter .1.3.6.1.4.1.2.6.2.12.39 |
ibmipxsapStatOutResponsesNumber of SAP responses sent by this entity.ro Counter .1.3.6.1.4.1.2.6.2.12.40 |
ibmipxsapStatInErrorsNumber of incoming SAP packets discarded due to errors.ro Counter .1.3.6.1.4.1.2.6.2.12.41 |
ibmipxsapStatOutDiscardsNumber of outgoing SAP packets discarded due
to lack of resources.ro Counter .1.3.6.1.4.1.2.6.2.12.42 |
ibmipxsapServerTableTable of IPX servers. SEQUENCE OF IbmIpxsapServerEntry .1.3.6.1.4.1.2.6.2.12.43 |
ibmipxsapServerEntryInformation on a single server. IbmIpxsapServerEntry .1.3.6.1.4.1.2.6.2.12.43.1 |
ibmipxsapServerTypeThe type of this server.ro INTEGER .1.3.6.1.4.1.2.6.2.12.43.1.1 |
ibmipxsapServerNetThe IPX network number of this server.ro OCTET STRING .1.3.6.1.4.1.2.6.2.12.43.1.2 |
ibmipxsapServerHostThe IPX host address of this server.ro OCTET STRING .1.3.6.1.4.1.2.6.2.12.43.1.3 |
ibmipxsapServerSocketThe IPX socket number this server uses to advertise
its service.ro INTEGER .1.3.6.1.4.1.2.6.2.12.43.1.4 |
ibmipxsapServerNameThe name of this server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.12.43.1.5 |
ibmipxsapServerAgeThe number of seconds since this server entry
was updated by the SAP protocol.ro INTEGER .1.3.6.1.4.1.2.6.2.12.43.1.6 |
ibmipxsapServerHopsThe number of network hops required to reach this server.ro INTEGER .1.3.6.1.4.1.2.6.2.12.43.1.7 |
ibmipxsapServerIfIndexThe interface which is used to reach this server. The
value of this object for a particular interface has the
same value as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.12.43.1.8 |
ibmipxsapServerIndexA unique number identifying servers advertised at the
same IPX network and host address.ro INTEGER .1.3.6.1.4.1.2.6.2.12.43.1.9 |
ibmipxsapServerRequestsFilteredNumber of times a request for this server has been
filtered.ro Counter .1.3.6.1.4.1.2.6.2.12.43.1.10 |
ibmappn OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13 |
ibmappnNode OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1 |
ibmappnGeneralInfoAndCaps OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.1 |
ibmappnNodeCpNameAdministratively-assigned network name
for this node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.1 |
ibmappnNodeNetidAdministratively-assigned APPN network identification,
which can be from one to eight characters.
This ID is used with the control point name
to create a fully-qualified control point name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.2 |
ibmappnNodeBlockNumThe block number is the first three digits of the node_id.
These 3 hexadecimal digits identify the product and are not
configurable.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.3 |
ibmappnNodeIdNumThe ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is include
in APPN alerts as well as being included in XIDs. A unique
value is required for connections to SNA sub-area.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.1.4 |
ibmappnNodeTypeType of APPN node, either network, len, or end node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.5 |
ibmappnNodeUpTimeTime (in hundredths of a second) since this APPN node
was initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.1.6 |
ibmappnNodeNegotLsIndicates whether this node supports negotiable
link stations.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.7 |
ibmappnNodeSegReasmIndicates whether this node supports segment
reassembly. This is only supported when
segment generation is also supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.8 |
ibmappnNodeBindReasmIndicates whether this node supports Bind segment
reassembly. This will only be supported when Bind
segment generation is also supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.9 |
ibmappnNodeParallelTgIndicates whether this node supports parallel TGs.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.10 |
ibmappnNodeServiceIndicates whether this node allows call-in from nodes not
defined locally.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.11 |
ibmappnNodeAdaptiveBindPacingIndicates whether this node supports adaptive bind pacing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.1.12 |
ibmappnNnUniqueInfoAndCaps OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.2 |
ibmappnNodeNnRcvRegCharIndicates whether this node supports receiving registered
characteristics.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.1 |
ibmappnNodeNnGatewayIndicates whether this is a gateway node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.2 |
ibmappnNodeNnCentralDirectoryIndicates whether this node supports central directory
cache.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.3 |
ibmappnNodeNnTreeCacheIndicates whether this node supports route tree cache.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.4 |
ibmappnNodeNnTreeUpdateIndicates whether this node supports
incremental_tree_update, which is only
supported when tree caching is supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.5 |
ibmappnNodeNnRouteAddResistRoute addition resistance is a value that
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.2.6 |
ibmappnNodeNnIsrIndicates whether the node supports intermediate
session routing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.2.7 |
ibmappnNodeNnFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.2.8 |
ibmappnEnUniqueCaps OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.3 |
ibmappnNodeEnSegGenIndicates whether this end node supports segment generation.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.1 |
ibmappnNodeEnModeCosMapIndicates whether this end node supports
mode name to COS name mapping.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.2 |
ibmappnNodeEnLocateCdinitIndicates whether this end node supports Locate Cdinit.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.3 |
ibmappnNodeEnSendRegNamesIndicates whether the node will register its LUs with the
adjacent serving network node:
NO - do not register names
YES - register namesro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.4 |
ibmappnNodeEnSendRegCharIndicates whether this node supports
send register characteristics, which is only
supported when send registered names is also
supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.3.5 |
ibmappnPortInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.4 |
ibmappnNodePortTableThe Port table describes the configuration and current
status of the ports used by APPN. The type of DLC is
included in this table as a pointer to the DLC port
specific tables. SEQUENCE OF IbmappnNodePortEntry .1.3.6.1.4.1.2.6.2.13.1.4.1 |
ibmappnNodePortEntryThe Port Name is used as the index to this table. IbmappnNodePortEntry .1.3.6.1.4.1.2.6.2.13.1.4.1.1 |
ibmappnNodePortNameAdministratively-assigned name for this APPN port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.1.1.1 |
ibmappnNodePortStateIndicates the current state of this port.rw Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.2 |
ibmappnNodePortDlcTypeThe type of DLC interface, distinguished according to
the protocol immediately 'below' this layer.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.3 |
ibmappnNodePortPortTypeIdentifies the type of line used by this port.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.4 |
ibmappnNodePortSIMRIMIndicates whether Set Initialization Mode (SIM) and
Receive Initialization Mode (RIM) are supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.5 |
ibmappnNodePortLsRoleInitial role for LSs activated through this port,
where 'abm' indicates asynchronous balance mode.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.1.1.6 |
ibmappnNodePortMaxRcvBtuSizeMaximum Basic Transmission Size (BTU) that a
link station on this port can receive.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.1.1.7 |
ibmappnNodePortMaxIframeWindowMaximum number of I-frames that can be received
by the XID sender before an acknowledgement is received.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.1.1.8 |
ibmappnNodePortDefLsGoodXidsThe total number of successfull XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.9 |
ibmappnNodePortDefLsBadXidsThe total number of unsuccessfull XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.10 |
ibmappnNodePortDynLsGoodXidsThe total number of successfull XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.11 |
ibmappnNodePortDynLsBadXidsThe total number of unsuccessfull XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.4.1.1.12 |
ibmappnNodePortSpecificIdentifies the port specific OBJECT IDENTIFIER
that can provide additional information.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.4.1.1.13 |
ibmappnNodePortIpTablePort table (TCP/IP specific). SEQUENCE OF IbmappnNodePortIpEntry .1.3.6.1.4.1.2.6.2.13.1.4.2 |
ibmappnNodePortIpEntryThe IP Name is used as the index to this table. IbmappnNodePortIpEntry .1.3.6.1.4.1.2.6.2.13.1.4.2.1 |
ibmappnNodePortIpNameAdministratively-assigned name for this APPN port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.2.1.1 |
ibmappnNodePortIpPortNumLocal TCP/IP port number.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.2.1.2 |
ibmappnNodePortDlsTablePort table (DLS specific). SEQUENCE OF IbmappnNodePortDlsEntry .1.3.6.1.4.1.2.6.2.13.1.4.3 |
ibmappnNodePortDlsEntryThe DLS Name is used as the index to this table. IbmappnNodePortDlsEntry .1.3.6.1.4.1.2.6.2.13.1.4.3.1 |
ibmappnNodePortDlsNameAdministratively-assigned name for this APPN DLS port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.3.1.1 |
ibmappnNodePortDlsMacLocal DLS MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.3.1.2 |
ibmappnNodePortDlsSapLocal DLS Sap address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.3.1.3 |
ibmappnNodePortTrTablePort table (Token Ring specific). SEQUENCE OF IbmappnNodePortTrEntry .1.3.6.1.4.1.2.6.2.13.1.4.4 |
ibmappnNodePortTrEntryThe TR Name is used as the index to this table. IbmappnNodePortTrEntry .1.3.6.1.4.1.2.6.2.13.1.4.4.1 |
ibmappnNodePortTrNameAdministratively-assigned name for this APPN port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.4.4.1.1 |
ibmappnNodePortTrMacLocal Token Ring MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.4.1.2 |
ibmappnNodePortTrSapLocal Token Ring Sap address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.4.4.1.3 |
ibmappnNodePortDlcTraceTablePort table generic DLC trace table. SEQUENCE OF IbmappnNodePortDlcTraceEntry .1.3.6.1.4.1.2.6.2.13.1.4.5 |
ibmappnNodePortDlcTraceEntryThe Port name and a dynamic integer are the index to this table. IbmappnNodePortDlcTraceEntry .1.3.6.1.4.1.2.6.2.13.1.4.5.1 |
ibmappnNodePortDlcTracPortNameThe Port name associated with this this trace table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.4.5.1.1 |
ibmappnNodePortDlcTracIndexThis index value is updated every time a new trace entry
is created which provides a means to retrieve only the
updated entries and also provides a simple method of
correlating the entries. The table will wrap when the
table is full, which will result in previous entries being
written over. The mangement station can over come this by
retrieving the table using this index to retrieve only the
new table entries.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.4.5.1.2 |
ibmappnNodePortDlcTracDlcTypeThe type of DLC interface, distinguished according to
the protocol immediately 'below' this layer.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.3 |
ibmappnNodePortDlcTracLocalAddrLocal address in format described below:
other = free form DisplayString
ip = ld.ld.ld.ld/2d
tr = lx:lx:lx:lx:lx:lx.lx
dlsw = lx:lx:lx:lx:lx:lx.lx
ethernet = lx:lx:lx:lx:lx:lx.lxro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.4.5.1.4 |
ibmappnNodePortDlcTracRemoteAddrRemote Address in the format described below:
other = free form DisplayString
ip = ld.ld.ld.ld/2d
tr = lx:lx:lx:lx:lx:lx.lx
dlsw = lx:lx:lx:lx:lx:lx.lx
ethernet = lx:lx:lx:lx:lx:lx.lxro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.4.5.1.5 |
ibmappnNodePortDlcTracMsgTypeIndicates the type of trace record entryro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.6 |
ibmappnNodePortDlcTracCmdTypeIndicates the command type of the trace entry.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.7 |
ibmappnNodePortDlcTracUseWanro Enumeration .1.3.6.1.4.1.2.6.2.13.1.4.5.1.8 |
ibmappnLinkStationInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.5 |
ibmappnNodeLsTableThis table contains detail information about the
link station configuration and current status. SEQUENCE OF IbmappnNodeLsEntry .1.3.6.1.4.1.2.6.2.13.1.5.1 |
ibmappnNodeLsEntryThis table is indexed by the link station name. IbmappnNodeLsEntry .1.3.6.1.4.1.2.6.2.13.1.5.1.1 |
ibmappnNodeLsNameAdministratively-assigned name for the link station.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.1 |
ibmappnNodeLsPortNameAdministratively-assigned name for the port.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 |
ibmappnNodeLsDlcTypeThe type of DLC interface, distinguished according to
the protocol immediately 'below' this layer.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.3 |
ibmappnNodeLsDynamicIdentifies whether this resource is a dynamic link station.
Dynamic link stations are created when adjacent nodes
that have not been locally defined establish a connection
with this node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.4 |
ibmappnNodeLsStateState of this link station.rw Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.5 |
ibmappnNodeLsCpNameFully-qualified name of the adjacent node for this link
station. The name can be from three to seventeen characters.
Format is netid.cpname.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.6 |
ibmappnNodeLsTgNumNumber associated with the TG to this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.7 |
ibmappnNodeLsLimResourceIndicates whether the link station is
a limited resource. If it is, the TG
is deactivated when there are no sessions.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.8 |
ibmappnNodeLsMigrationIndicates whether this link station will be used
for connections to down-level or migration partners.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.9 |
ibmappnNodeLsBlockNumThe block number is the first three digits of the node_id.
These 3 hexideimal digits identify the product and are not
configurable.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.10 |
ibmappnNodeLsIdNumThe ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is include
in APPN alerts as well as being included in XIDs. A unique
value is required for connections to SNA sub-area.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.1.1.11 |
ibmappnNodeLsCpCpSessionIndicates whether CP-CP sessions are
supported by this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.12 |
ibmappnNodeLsTargetPacingCountNumeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performed.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.13 |
ibmappnNodeLsMaxSendBtuSizeNumeric value between 0 and 32767 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assigned value.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.14 |
ibmappnNodeLsEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.15 |
ibmappnNodeLsConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.16 |
ibmappnNodeLsByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.17 |
ibmappnNodeLsSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.18 |
ibmappnNodeLsDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with the TG using this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.19 |
ibmappnNodeLsUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.20 |
ibmappnNodeLsUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.21 |
ibmappnNodeLsUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.22 |
ibmappnNodeLsInXidBytesNumber of XID bytes received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.23 |
ibmappnNodeLsInMsgBytesNumber of message (I-frame) bytes received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.24 |
ibmappnNodeLsInXidFramesNumber of XID frames received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.25 |
ibmappnNodeLsInMsgFramesNumber of message (I-frame) frames received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.26 |
ibmappnNodeLsOutXidBytesNumber of XID bytes sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.27 |
ibmappnNodeLsOutMsgBytesNumber of message (I-frame) bytes sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.28 |
ibmappnNodeLsOutXidFramesNumber of XID frames sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.29 |
ibmappnNodeLsOutMsgFramesNumber of message (I-frame) frames sent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.30 |
ibmappnNodeLsEchoRspsNumber of responses returned from adjacent link station.
A response should be returned for each test frame sent by
this node.
Test frames are sent to adjacent nodes periodically to
verify connectivity and to measure that actual round trip
time, that is the time the test frame is sent until the
response is received.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.31 |
ibmappnNodeLsCurrentDelayThe time that it took for the last test signal to be
sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.32 |
ibmappnNodeLsMaxDelayThe longest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds .ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.33 |
ibmappnNodeLsMinDelayThe shortest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.34 |
ibmappnNodeLsMaxDelayTimeThe time (since system up in hundredth of seconds)
when the longest delay occurred.
This time can be used to identify when this high
water mark occurred in relation to the last initialization
of the APPN node.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.35 |
ibmappnNodeLsGoodXidsThe total number of successful XIDs that have occurred
on this link station since the time it was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.36 |
ibmappnNodeLsBadXidsThe total number of unsuccessful XIDs that have occurred
on this link station since the time it was started.ro Counter .1.3.6.1.4.1.2.6.2.13.1.5.1.1.37 |
ibmappnNodeLsSpecificIdentifies the DLC specific OBJECT IDENTIFIER
that can provide additional information.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.5.1.1.38 |
ibmappnNodeLsSubStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.1.1.39 |
ibmappnNodeLsStartTimeThe time (in hundredth of seconds) this link station
has been active the last time since the time APPN was
initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.40 |
ibmappnNodeLsActiveTimeThe time (in hundredth of seconds) this link station
has been in the active state.
A zero value indicates the link station has never been
active.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.41 |
ibmappnNodeLsCurrentStateTimeThe time (in hundredth of seconds) the link station is
in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.1.1.42 |
ibmappnNodeLsIpTableLink station table (TCP/IP specific). SEQUENCE OF IbmappnNodeLsIpEntry .1.3.6.1.4.1.2.6.2.13.1.5.2 |
ibmappnNodeLsIpEntryThe IP Name is used as the index to this table. IbmappnNodeLsIpEntry .1.3.6.1.4.1.2.6.2.13.1.5.2.1 |
ibmappnNodeLsIpNameAdministratively-assigned name for this link station. The
name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.2.1.1 |
ibmappnNodeLsIpStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.2.1.2 |
ibmappnNodeLsLocalIpAddrLocal IP address.ro IpAddress .1.3.6.1.4.1.2.6.2.13.1.5.2.1.3 |
ibmappnNodeLsLocalIpPortNumLocal TCP/IP port number.
The default listening port will be administratively
assigned and will dynamically change if this node
initiates a session with adjacent node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.2.1.4 |
ibmappnNodeLsRemoteIpAddrRemote IP address.ro IpAddress .1.3.6.1.4.1.2.6.2.13.1.5.2.1.5 |
ibmappnNodeLsRemoteIpPortNumRemote TCP/IP port number.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.2.1.6 |
ibmappnNodeLsDlsTableLs Table (DLS specific). SEQUENCE OF IbmappnNodeLsDlsEntry .1.3.6.1.4.1.2.6.2.13.1.5.3 |
ibmappnNodeLsDlsEntryThe DLS Name is used as the index to this table. IbmappnNodeLsDlsEntry .1.3.6.1.4.1.2.6.2.13.1.5.3.1 |
ibmappnNodeLsDlsNameAdministratively-assigned name for this link station.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.3.1.1 |
ibmappnNodeLsDlsStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.3.1.2 |
ibmappnNodeLsLocalDlsMacLocal MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.3 |
ibmappnNodeLsLocalDlsSapLocal SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.4 |
ibmappnNodeLsRemoteDlsMacRemote MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.5 |
ibmappnNodeLsRemoteDlsSapRemote SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.3.1.6 |
ibmappnNodeLsTrTableLs Table (Token Ring specific). SEQUENCE OF IbmappnNodeLsTrEntry .1.3.6.1.4.1.2.6.2.13.1.5.4 |
ibmappnNodeLsTrEntryThe TR Name is used as the index to this table. IbmappnNodeLsTrEntry .1.3.6.1.4.1.2.6.2.13.1.5.4.1 |
ibmappnNodeLsTrNameAdministratively-assigned name for this link station.
The name can be from one to eight characters.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.4.1.1 |
ibmappnNodeLsTrStateState of this link station.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.4.1.2 |
ibmappnNodeLsLocalTrMacLocal MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.3 |
ibmappnNodeLsLocalTrSapLocal SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.4 |
ibmappnNodeLsRemoteTrMacRemote MAC address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.5 |
ibmappnNodeLsRemoteTrSapRemote SAP address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.4.1.6 |
ibmappnNodeLsStatusTableThis table contains information related to exceptional
and potential exceptional conditions that occur during
the activation, XID exchange, and termination of the
connection. SEQUENCE OF IbmappnNodeLsStatusEntry .1.3.6.1.4.1.2.6.2.13.1.5.5 |
ibmappnNodeLsStatusEntryThis table is indexed by the LsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps. This provides the management station the ability
to retrieve only the updates to the table by using the
standard GET NEXT. IbmappnNodeLsStatusEntry .1.3.6.1.4.1.2.6.2.13.1.5.5.1 |
ibmappnNodeLsStatusIndexTable index. The value of the index begins at zero
and is incremented up to a maximum value of 2**31-1
(2,147,483,647) before wrapping.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.5.1.1 |
ibmappnNodeLsStatusTimeTime (in hundreds of a second) since this node was last
initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.1.5.5.1.2 |
ibmappnNodeLsStatusLsNameAdministratively-assigned name for this link station.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.3 |
ibmappnNodeLsStatusCpNameAdministratively-assigned fully-qualified name of the
adjacent node partner. This will be provided when the
adjacent node has been defined at this node or when the
XID sequence has proceeded far enough to to identify the
adjacent node. A blank CP name will indicate the name is
unknown.ro DisplayString .1.3.6.1.4.1.2.6.2.13.1.5.5.1.4 |
ibmappnNodeLsStatusNodeIdAdjacent Node idro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.5 |
ibmappnNodeLsStatusTgNumNumber associated with the TG to this link station
with a range from 0 to 256. A value of 256 indicates
the tg number has not been negotiated and is unknown at
this time.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.5.5.1.6 |
ibmappnNodeLsStatusGeneralSenseThe error sense code associated with the start sequence of
activation of a link up to the beginning of the XID sequence.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.7 |
ibmappnNodeLsStatusNofRetryIndicates whether NOF will retry the start request to
activate the link.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.8 |
ibmappnNodeLsStatusEndSenseThe sense code associated with the termination of the link
connection to adjacent node. This includes all sense
information included in the disconnect recieved from the
lower layer DLCs and also sense information indicating the
link termination originated by upper layer APPN components.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.9 |
ibmappnNodeLsStatusXidLocalSenseThe error sense code associated with the rejection of the
XID.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.10 |
ibmappnNodeLsStatusXidRemoteSenseThe error sense code adjacent node returned to this node
indicating the reason the XID was rejected.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.1.5.5.1.11 |
ibmappnNodeLsStatusXidByteInErrorThis identifies the actual byte in the XID that caused the
error. The value of zero (0) indicates that the variable
has no meaning.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.12 |
ibmappnNodeLsStatusXidBitInErrorThis identifies the actual bit within the error byte of the
XID. This only has meaning when the byte in error is greater
than zero.ro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.13 |
ibmappnNodeLsStatusDlcTypeThis identifies DLC type that was being used when error
occurred. This also is used to the format of the
local and remote address provided.
other = free form DisplayString
ip = ld.ld.ld.ld/2d
tr = lx:lx:lx:lx:lx:lx.lx
dlsw = lx:lx:lx:lx:lx:lx.lx
ethernet = lx:lx:lx:lx:lx:lx.lxro Enumeration .1.3.6.1.4.1.2.6.2.13.1.5.5.1.14 |
ibmappnNodeLsStatusLocalAddrThis contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.5.5.1.15 |
ibmappnNodeLsStatusRemoteAddrThis contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.1.5.5.1.16 |
ibmappnSnmpInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.6 |
ibmappnSnmpInPktsTotal number of messages delivered to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.1 |
ibmappnSnmpInGetRequestsTotal number of GET requests delivered to the APPN SNMP
sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.2 |
ibmappnSnmpInGetNextsTotal number of GETNEXT requests delivered to the APPN SNMP
sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.3 |
ibmappnSnmpInSetRequestsTotal number of SET requests delivered to the APPN SNMP
sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.4 |
ibmappnSnmpInTotalVarsTotal number of VARIABLES included in both
GET and GETNEXT requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.5 |
ibmappnSnmpInGetVarsTotal number of VARIBLES included in all
GET requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.6 |
ibmappnSnmpInGetNextVarsTotal number of VARIABLES included in all
GETNEXT requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.7 |
ibmappnSnmpInSetVarsTotal number of VARIBLES included in all
SET requests to the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.8 |
ibmappnSnmpOutNoSuchNamesTotal number of VARIABLES that could not
be found by the APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.9 |
ibmappnSnmpOutGenErrsTotal number of undefined errors that
occurred processing SNMP request to the
APPN SNMP sub-agent.ro Counter .1.3.6.1.4.1.2.6.2.13.1.6.10 |
ibmappnMemoryUse OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.7 |
ibmappnMemorySizeSize of the shared storage segment, as obtained
by storage management from the underlying operating
system.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.1 |
ibmappnMemoryUsedNumber of bytes in the segment that are currently
allocated to process.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.2 |
ibmappnMemoryWarnThreshAllocation threshold beyond which storage
management considers the storage resources
to be constrained.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.3 |
ibmappnMemoryCritThreshAllocation threshold beyond which storage
management considers the storage resources
to be critically constrained.ro INTEGER .1.3.6.1.4.1.2.6.2.13.1.7.4 |
ibmappnXidInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.1.8 |
ibmappnNodeDefLsGoodXidsThe current number of successfull XIDs that have occurred
on all defined link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.1 |
ibmappnNodeDefLsBadXidsThe current number of unsuccessfull XIDs that have occurred
on all defined link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.2 |
ibmappnNodeDynLsGoodXidsThe current number of successfull XIDs that have occurred
on all dynamic link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.3 |
ibmappnNodeDynLsBadXidsThe current number of unsuccessfull XIDs that have occurred
on all dynamic link stations since the last time this node
was initialized.ro Counter .1.3.6.1.4.1.2.6.2.13.1.8.4 |
ibmappnNn OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.2 |
ibmappnNnTopo OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.2.1 |
ibmappnNnTopoMaxNodesMaximum number of nodes allowed in the APPN topology database
This administratively assigned value must be equal to or
greater than the maximum total number of end nodes and
network nodes.
If the number of nodes exceeds this value, APPN will issue
an Alert and the node can no longer participate as a network
node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.1.1 |
ibmappnNnTopoCurNumNodesCurrent number of nodes in this node's topology database.
If this value exceeds the maximum number of nodes allowed
(NnTopoMaxNodes), APPN alert CPDB002 is
issued.ro Gauge .1.3.6.1.4.1.2.6.2.13.2.1.2 |
ibmappnNnTopoInTdusTotal number of TDUs received from
all adjacent NN since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.3 |
ibmappnNnTopoOutTdusTotal number of TDUs built by this node to be sent to
all adjacent NN since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.4 |
ibmappnNnTopoNodeLowRsnsTotal number of topology node updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the adjacent node that
sent this low RSN.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.5 |
ibmappnNnTopoNodeEqualRsnsTotal number of topology node updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.6 |
ibmappnNnTopoNodeGoodHighRsnsTotal number of topology node updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes. It is not required to
send a TDU to the sender of this update because that node
already has the update.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.7 |
ibmappnNnTopoNodeBadHighRsnsTotal number of topology node updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.8 |
ibmappnNnTopoNodeStateUpdatesTotal number of topology Node records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.9 |
ibmappnNnTopoNodeErrorsTotal number of topology node records inconsistencies
detected by this node. This occurs when this node attempts
to update its topology database and detects a data
inconsistency. This node will create a TDU with the
current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.10 |
ibmappnNnTopoNodeTimerUpdatesTotal number of topology node records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.11 |
ibmappnNnTopoNodePurgesTotal number of topology node records purged from this
node's topology database. This occurs when a node has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its resource
that it wants kept in the network topology.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.12 |
ibmappnNnTopoTgLowRsnsTotal number of topology TG updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the sender of the low
RSN.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.13 |
ibmappnNnTopoTgEqualRsnsTotal number of topology TG updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.14 |
ibmappnNnTopoTgGoodHighRsnsTotal number of topology TG updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and broadcasting
the update to all adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.15 |
ibmappnNnTopoTgBadHighRsnsTotal number of topology TG updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.16 |
ibmappnNnTopoTgStateUpdatesTotal number of topology TG records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.17 |
ibmappnNnTopoTgErrorsTotal number of topology TG records inconsistencies
detected by this node. This occurs when this node attempts
to update its topology database and detects a data
inconsistency. This node will create a TDU with the
current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.18 |
ibmappnNnTopoTgTimerUpdatesTotal number of topology TG records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.19 |
ibmappnNnTopoTgPurgesTotal number of topology TG records purged from this
node's topology database. This occurs when a TG has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its resource
that it wants to keep in the network topology.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.20 |
ibmappnNnTopoTotalRouteCalcsNumber of routes calculated for all class of services
since the last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.21 |
ibmappnNnTopoTotalRouteRejsNumber of route requests for all class of services that
could not be calculated since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.22 |
ibmappnNnTopoRouteTableTable containing an entry for every Class of Service
that it has calculated a route for. SEQUENCE OF IbmappnNnTopoRouteEntry .1.3.6.1.4.1.2.6.2.13.2.1.23 |
ibmappnNnTopoRouteEntryThe Class of Service name is the index for this table. IbmappnNnTopoRouteEntry .1.3.6.1.4.1.2.6.2.13.2.1.23.1 |
ibmappnNnTopoRouteCosThe Class of Service for the route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.2.1.23.1.1 |
ibmappnNnTopoRouteTreesNumber of routes tree caches built for this Class of
Service since the last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.23.1.2 |
ibmappnNnTopoRouteCalcsNumber of routes calculated since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.23.1.3 |
ibmappnNnTopoRouteRejsNumber of route requests that could not
be calculated since last initialization.ro Counter .1.3.6.1.4.1.2.6.2.13.2.1.23.1.4 |
ibmappnNnAdjNodeTableTable containing an entry for every node. The information
kept in this table is the last FRSN sent and received,
the status of the CP-CP sessions, and a gauge that indicates
the number of outstanding TDUs. SEQUENCE OF IbmappnNnAdjNodeEntry .1.3.6.1.4.1.2.6.2.13.2.2 |
ibmappnNnAdjNodeEntryThe adjacent node name is the index for this table. IbmappnNnAdjNodeEntry .1.3.6.1.4.1.2.6.2.13.2.2.1 |
ibmappnNnAdjNodeAdjNameAn administratively-assigned fully-qualified
name of this node's adjacent network node.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.2.1.1 |
ibmappnNnAdjNodeCpCpSessStatusIndicates the state of CP-CP sessions between this node
and adjacent network and end nodes. Incative indicates no
CP-CP sessions exists between this node and the adjacent
node. Active indicates CP-CP sessons are active using both
the ConWinner and ConLoser sessions. The session initiated
by this node is refered to as the ConWinner session and is
used by this node to send to the adjacent node. The ConLoserr
session is initiated by the adjacent node and is used by this
node to receive from the adjacent node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.2.1.2 |
ibmappnNnAdjNodeOutOfSeqTdusNumber of out of sequence Topology Database
Updates (TDUs). In a quiesced state, this value is
zero. In normal operation, the value varies
depending on the network environment.ro Gauge .1.3.6.1.4.1.2.6.2.13.2.2.1.3 |
ibmappnNnAdjNodeLastFrsnSentFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU sent to this adjacent node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.2.1.4 |
ibmappnNnAdjNodeLastFrsnRcvdFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU received from this adjacent node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.2.1.5 |
ibmappnNnTopology OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.2.3 |
ibmappnNnTopologyTablePortion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node. SEQUENCE OF IbmappnNnTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.1 |
ibmappnNnTopologyEntryThe fully-qualified node name is used to
index this table. IbmappnNnTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.1.1 |
ibmappnNnNodeNameAdministratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.1.1.1 |
ibmappnNnNodeFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.2 |
ibmappnNnNodeEntryTimeLeftNumber of days before deletion of this
network node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.3 |
ibmappnNnNodeTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.4 |
ibmappnNnNodeRsnResource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.5 |
ibmappnNnNodeRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.1.1.6 |
ibmappnNnNodeCongestedIndicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.7 |
ibmappnNnNodeIsrDepletedIndicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.8 |
ibmappnNnNodeEndptDepletedIndicates whether session endpoint resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.9 |
ibmappnNnNodeQuiescingIndicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.10 |
ibmappnNnNodeGatewayIndicates whether the node provide gateway functions.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.11 |
ibmappnNnNodeCentralDirectoryIndicates whether the node is central directory.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.12 |
ibmappnNnNodeIsrIndicates whether the node supports intermediate session
routing (ISR).ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.13 |
ibmappnNnNodeChainSupportIndicates whether the node supports chaining.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.1.1.14 |
ibmappnNnTgTopologyTablePortion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes. SEQUENCE OF IbmappnNnTgTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.2 |
ibmappnNnTgTopologyEntryThis table requires three indexes to provide a
unique index. The indexes are the owning or originating
CPname, the destination CPname, and the TG number. IbmappnNnTgTopologyEntry .1.3.6.1.4.1.2.6.2.13.2.3.2.1 |
ibmappnNnTgOwnerAdministratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.2.1.1 |
ibmappnNnTgDestAdministratively-assigned fully-qualified
network name for the destination node for this TG.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.2.1.2 |
ibmappnNnTgNumNumber associated with this
transmission group. Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.3 |
ibmappnNnTgFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.4 |
ibmappnNnTgEntryTimeLeftNumber of days before deletion of this
network node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.5 |
ibmappnNnTgDestVirtualIndicates whether the destination node is
a virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.6 |
ibmappnNnTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.2.3.2.1.7 |
ibmappnNnTgRsnCurrent owning node's resource sequence number
for this resource.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.8 |
ibmappnNnTgOperationalIndicates whether the transmission group
is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.9 |
ibmappnNnTgQuiescingIndicates whether the transmission group
is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.10 |
ibmappnNnTgCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.11 |
ibmappnNnTgEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.12 |
ibmappnNnTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.13 |
ibmappnNnTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.14 |
ibmappnNnTgSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.15 |
ibmappnNnTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.2.1.16 |
ibmappnNnTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.17 |
ibmappnNnTgUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.18 |
ibmappnNnTgUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.19 |
ibmappnNnTgUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.2.1.20 |
ibmappnNnTopologyFRTablePortion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node. SEQUENCE OF IbmappnNnTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.3 |
ibmappnNnTopologyFREntryThe fully-qualified node name is used to
index this table. IbmappnNnTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.3.1 |
ibmappnNnNodeFRNameAdministratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.3.1.1 |
ibmappnNnNodeFRFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.2 |
ibmappnNnNodeFREntryTimeLeftNumber of days before deletion of this
network node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.3 |
ibmappnNnNodeFRTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.4 |
ibmappnNnNodeFRRsnResource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.5 |
ibmappnNnNodeFRRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.3.1.6 |
ibmappnNnNodeFRCongestedIndicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.7 |
ibmappnNnNodeFRIsrDepletedIndicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.8 |
ibmappnNnNodeFREndptDepletedIndicates whether session endpoint resources are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.9 |
ibmappnNnNodeFRQuiescingIndicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.10 |
ibmappnNnNodeFRGatewayIndicates whether the node provide gateway functions.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.11 |
ibmappnNnNodeFRCentralDirectoryIndicates whether the node is central directory.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.12 |
ibmappnNnNodeFRIsrIndicates whether the node supports intermediate session
routing (ISR).ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.13 |
ibmappnNnNodeFRChainSupportIndicates whether the node supports chaining.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.3.1.14 |
ibmappnNnTgTopologyFRTablePortion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes. SEQUENCE OF IbmappnNnTgTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.4 |
ibmappnNnTgTopologyFREntryThis table is indexed by four columns:
FRSN, TG owner fully-qualified node name,
TG destination fully-qualified node name, TG number. IbmappnNnTgTopologyFREntry .1.3.6.1.4.1.2.6.2.13.2.3.4.1 |
ibmappnNnTgFROwnerAdministratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.4.1.1 |
ibmappnNnTgFRDestAdministratively-assigned fully-qualified
network name for the destination node for this TG.ro DisplayString .1.3.6.1.4.1.2.6.2.13.2.3.4.1.2 |
ibmappnNnTgFRNumNumber associated with this
transmission group. Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.3 |
ibmappnNnTgFRFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.4 |
ibmappnNnTgFREntryTimeLeftNumber of days before deletion of this
network node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.5 |
ibmappnNnTgFRDestVirtualIndicates whether the destination node is
a virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.6 |
ibmappnNnTgFRDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.2.3.4.1.7 |
ibmappnNnTgFRRsnCurrent owning node's resource sequence number
for this resource.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.8 |
ibmappnNnTgFROperationalIndicates whether the transmission group
is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.9 |
ibmappnNnTgFRQuiescingIndicates whether the transmission group
is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.10 |
ibmappnNnTgFRCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.11 |
ibmappnNnTgFREffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.12 |
ibmappnNnTgFRConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.13 |
ibmappnNnTgFRByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.14 |
ibmappnNnTgFRSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.15 |
ibmappnNnTgFRDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.2.3.4.1.16 |
ibmappnNnTgFRModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.17 |
ibmappnNnTgFRUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.18 |
ibmappnNnTgFRUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.19 |
ibmappnNnTgFRUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.2.6.2.13.2.3.4.1.20 |
ibmappnLocalTopology OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3 |
ibmappnLocalThisNode OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1 |
ibmappnLocalGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1.1 |
ibmappnLocalNodeNameAdministratively-assigned fully-qualified name
for this node. Format is NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.1.1.1 |
ibmappnLocalNodeTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.1.2 |
ibmappnLocalNnSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1.2 |
ibmappnLocalNnRsnResource sequence number is assigned and
controlled by the network node that owns this
resource. This is always an even unsigned
number unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.2.1 |
ibmappnLocalNnRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.2.2 |
ibmappnLocalNnCongestedIndicates whether this node is congested.
Other network nodes stop routing traffic to
this node while this flag is on.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.3 |
ibmappnLocalNnIsrDepletedIndicate whether intermediated session
routing resources are depleted.
Other network nodes stop routing traffic through
this node while this flag is on.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.4 |
ibmappnLocalNnEndptDepletedIndicates whether session endpoint resources
are depleted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.5 |
ibmappnLocalNnQuiescingIndicates whether the node is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.6 |
ibmappnLocalNnGatewayIndicates whether the node is a gateway.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.7 |
ibmappnLocalNnCentralDirectoryIndicates whether the node is a central directory.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.8 |
ibmappnLocalNnIsrIndicates whether the node supports intermediate session routing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.9 |
ibmappnLocalNnChainSupportIndicates whether the node supports chaining.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.2.10 |
ibmappnLocalNnFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.2.11 |
ibmappnLocalTg OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.1.3 |
ibmappnLocalTgTableTG Table describes all of the TGs owned by this
node. The TG destination can be a virtual
node, network node, len, or end node. SEQUENCE OF IbmappnLocalTgEntry .1.3.6.1.4.1.2.6.2.13.3.1.3.1 |
ibmappnLocalTgEntryThis table is indexed by the destination CPname
and the TG number. IbmappnLocalTgEntry .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1 |
ibmappnLocalTgDestAdministratively-assigned name for the
destination node for this TG.
This is the fully-qualified network node
name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1 |
ibmappnLocalTgNumNumber associated with this transmission group.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2 |
ibmappnLocalTgDestVirtualIndicates whether the destination node is
a Virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3 |
ibmappnLocalTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4 |
ibmappnLocalTgRsnThe resource sequence number is assigned and
controlled by the network node that owns this
resource. This is always an even unsigned
number unless an error has occurred.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5 |
ibmappnLocalTgQuiescingIndicates whether the Transmission Group
is quiescing.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6 |
ibmappnLocalTgOperationalIndicates whether the Transmission Group
is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7 |
ibmappnLocalTgCpCpSessionIndicates whether the CP-CP Sessions are
supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8 |
ibmappnLocalTgEffCapThe effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9 |
ibmappnLocalTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10 |
ibmappnLocalTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11 |
ibmappnLocalTgSecuritySecurity level for this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12 |
ibmappnLocalTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13 |
ibmappnLocalTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non-connection network it is zero.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14 |
ibmappnLocalTgUsr1Value of the first user-defined TG
characteristic for this TG.
Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15 |
ibmappnLocalTgUsr2Value of the second user-defined TG
characteristic for this TG.
Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16 |
ibmappnLocalTgUsr3Value of the third user-defined TG
characteristic for this TG.
Range is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17 |
ibmappnLocalEnTopology OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.3.2 |
ibmappnLocalEnTablePortion of the APPN topology
database that describes the end
nodes known to this node. SEQUENCE OF IbmappnLocalEnEntry .1.3.6.1.4.1.2.6.2.13.3.2.1 |
ibmappnLocalEnEntryThis table is indexed by the end node CPname. IbmappnLocalEnEntry .1.3.6.1.4.1.2.6.2.13.3.2.1.1 |
ibmappnLocalEnNameAdministratively-assigned fully-qualified
name of end node in the format NETID.CPNAME.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.2.1.1.1 |
ibmappnLocalEnEntryTimeLeftNumber of days before deletion of this
end node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.1.1.2 |
ibmappnLocalEnTypeType of APPN node (must always be a len or end node).ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.1.1.3 |
ibmappnLocalEnTgTableTable describing all of the TGs owned by the
end nodes known to this node.
The TG destination can be a virtual
node, network node, or end node. SEQUENCE OF IbmappnLocalEnTgEntry .1.3.6.1.4.1.2.6.2.13.3.2.2 |
ibmappnLocalEnTgEntryThis table requires multiple indexes to uniquely
identify each TG. They are originating CPname,
destination CPname, and the TG number. IbmappnLocalEnTgEntry .1.3.6.1.4.1.2.6.2.13.3.2.2.1 |
ibmappnLocalEnTgOriginAdministratively-assigned name for the
origination node for this TG.
This is the fully-qualified network name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.2.2.1.1 |
ibmappnLocalEnTgDestAdministratively-assigned name for the
destination node for this TG.
This is the fully-qualified network name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.3.2.2.1.2 |
ibmappnLocalEnTgNumNumber associated with this transmission group.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.3 |
ibmappnLocalEnTgEntryTimeLeftNumber of days before deletion of this
end node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.4 |
ibmappnLocalEnTgDestVirtualIndicates whether the destination node is
a virtual node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.5 |
ibmappnLocalEnTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digitsro OCTET STRING .1.3.6.1.4.1.2.6.2.13.3.2.2.1.6 |
ibmappnLocalEnTgOperationalIndicates whether the Transmission Group is operational.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.7 |
ibmappnLocalEnTgCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.8 |
ibmappnLocalEnTgEffCapThe effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.9 |
ibmappnLocalEnTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.10 |
ibmappnLocalEnTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0, which means no cost, to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.11 |
ibmappnLocalEnTgSecuritySecurity level for this TG.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.12 |
ibmappnLocalEnTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.3.2.2.1.13 |
ibmappnLocalEnTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non connection network it is zero.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.14 |
ibmappnLocalEnTgUsr1First user-defined TG characteristic
for this TG. Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.15 |
ibmappnLocalEnTgUsr2Second user-defined TG characteristic
for this TG. Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.16 |
ibmappnLocalEnTgUsr3Third user-defined TG characteristic
for this TG. Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.3.2.2.1.17 |
ibmappnDir OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.5 |
ibmappnDirPerf OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.5.1 |
ibmappnDirMaxCachesMaximum number of cache entries allowed. This
is an administratively assigned value.ro INTEGER .1.3.6.1.4.1.2.6.2.13.5.1.1 |
ibmappnDirCurCachesCurrent number of cache entries.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.2 |
ibmappnDirCurHomeEntriesCurrent number of home entries.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.3 |
ibmappnDirRegEntriesCurrent number of registered entries.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.4 |
ibmappnDirInLocatesNumber of directed locates received.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.5 |
ibmappnDirInBcastLocatesNumber of broadcast locates received.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.6 |
ibmappnDirOutLocatesNumber of directed locates sent.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.7 |
ibmappnDirOutBcastLocatesNumber of broadcast locates sent.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.8 |
ibmappnDirNotFoundLocatesNumber of directed locates returned with a 'not found'.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.9 |
ibmappnDirNotFoundBcastLocatesNumber of broadcast locates returned with
a not found.ro Counter .1.3.6.1.4.1.2.6.2.13.5.1.10 |
ibmappnDirLocateOutstandsCurrent number of outstanding locates,
both directed and broadcast. This value
varies. A value of zero indicates
that no locates are unanswered.ro Gauge .1.3.6.1.4.1.2.6.2.13.5.1.11 |
ibmappnDirTableTable containing information about
all known LUs and TPs. SEQUENCE OF IbmappnDirEntry .1.3.6.1.4.1.2.6.2.13.5.2 |
ibmappnDirEntryThis table is indexed by the LU name. IbmappnDirEntry .1.3.6.1.4.1.2.6.2.13.5.2.1 |
ibmappnDirLuNameFully-qualified network LU name in the
domain of the serving network node.ro DisplayString .1.3.6.1.4.1.2.6.2.13.5.2.1.1 |
ibmappnDirServerNameFully-qualified control point (CP) name of the
network node server. For unassociated end node
entries, the end node fully-qualified name
is returned.ro DisplayString .1.3.6.1.4.1.2.6.2.13.5.2.1.2 |
ibmappnDirLuOwnerNameFully-qualified CP name of the node at which
the LU is located. This name is the same as the
serving NN name when the LU is located at a
network node or an unassociated end node. It is
also the same as the fully-qualified LU name
when this is the control point LU for this node.ro DisplayString .1.3.6.1.4.1.2.6.2.13.5.2.1.3 |
ibmappnDirLuLocationSpecifies the location of the LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.4 |
ibmappnDirTypeDirectory types are:
1 - Home
The LU is in the domain of the local network node
and the LU information has been configured at the
local node.
2 - Cache
The LU has previously been located by a broadcast
search and the location information has been saved.
3 - Register
The LU is at an end node that is in the domain
of the local network node. Registered entries
are registered by the served end node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.5 |
ibmappnDirWildCard1 - Other means unknown type of LU entry.
2 - Expliced-entry means the full LUNAME will be used
for locating this LU.
3 - Partial-wildcard means only the non-blank portions
of the LUNAME will be used for locating this LU.
4 - Full-wildcard means all LUNAMES will be directed
to this LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.5.2.1.6 |
ibmappnCos OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.6 |
ibmappnCosModeTableTable representing all of the defined
mode names for this node. The table
contains the matching COS name. SEQUENCE OF IbmappnCosModeEntry .1.3.6.1.4.1.2.6.2.13.6.1 |
ibmappnCosModeEntryThis table is indexed by the Mode Name. IbmappnCosModeEntry .1.3.6.1.4.1.2.6.2.13.6.1.1 |
ibmappnCosModeNameAdministratively-assigned name for this
mode entry.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.1.1.1 |
ibmappnCosModeCosNameAn administratively assigned name for this
Class of Service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.1.1.2 |
ibmappnCosNameTableTable representing all of the defined class-of-service
names for this node. The COS node and TG tables are
accessed using the same index, which is the COS name. SEQUENCE OF IbmappnCosNameEntry .1.3.6.1.4.1.2.6.2.13.6.2 |
ibmappnCosNameEntryThe COS name is the index to this table. IbmappnCosNameEntry .1.3.6.1.4.1.2.6.2.13.6.2.1 |
ibmappnCosNameAdministratively-assigned name for this
class of service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.2.1.1 |
ibmappnCosTransPriorityTransmission priority for this
class of service. Values are:
Low
Medium
High
Networkro Enumeration .1.3.6.1.4.1.2.6.2.13.6.2.1.2 |
ibmappnCosNodeRowTableThis table contains all node-row information for all
class of service in this node. SEQUENCE OF IbmappnCosNodeRowEntry .1.3.6.1.4.1.2.6.2.13.6.3 |
ibmappnCosNodeRowEntryThe COS name is the first index and a integer
is the second index to insure a unique index. IbmappnCosNodeRowEntry .1.3.6.1.4.1.2.6.2.13.6.3.1 |
ibmappnCosNodeRowNameAdministratively-assigned name for this
class of service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.3.1.1 |
ibmappnCosNodeRowIndexIndex of COS name. This same value is used
to access the node and TG COS tables.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.3.1.2 |
ibmappnCosNodeRowWgtWeight to be associated with the nodes
that fit the criteria specified by this node row.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.6.3.1.3 |
ibmappnCosNodeRowResistMinMinimum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.3.1.4 |
ibmappnCosNodeRowResistMaxMaximum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.3.1.5 |
ibmappnCosNodeRowMinCongestAllowIndicates whether low congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.3.1.6 |
ibmappnCosNodeRowMaxCongestAllowIndicates whether high congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.3.1.7 |
ibmappnCosTgRowTableTable containing all the Tg-row information for all
class of service defined in this node. SEQUENCE OF IbmappnCosTgRowEntry .1.3.6.1.4.1.2.6.2.13.6.4 |
ibmappnCosTgRowEntryThe TgRowName and the TgRowIndex are the index
for this table. IbmappnCosTgRowEntry .1.3.6.1.4.1.2.6.2.13.6.4.1 |
ibmappnCosTgRowNameAdministratively-assigned name for this
class of service.ro DisplayString .1.3.6.1.4.1.2.6.2.13.6.4.1.1 |
ibmappnCosTgRowIndexIndex of COS name. This same value is used
to access the node and TG COS tables.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.2 |
ibmappnCosTgRowWgtWeight to be associated with the nodes
that fit the criteria specified by this tg-row.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.6.4.1.3 |
ibmappnCosTgRowEffCapMinMinimum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.4 |
ibmappnCosTgRowEffCapMaxMaximum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.5 |
ibmappnCosTgRowConnCostMinMinimum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.6 |
ibmappnCosTgRowConnCostMaxMaximum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.7 |
ibmappnCosTgRowByteCostMinMinimum acceptable cost per byte
for this Class of Service.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.8 |
ibmappnCosTgRowByteCostMaxMaximum acceptable cost per byte
for this Class of Service.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.9 |
ibmappnCosTgRowSecurityMinMinimum acceptable security
for this Class of Service.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.10 |
ibmappnCosTgRowSecurityMaxMaximum acceptable security
for this Class of Service.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.11 |
ibmappnCosTgRowDelayMinMinimum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.12 |
ibmappnCosTgRowDelayMaxMaximum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more values enumerated.ro Enumeration .1.3.6.1.4.1.2.6.2.13.6.4.1.13 |
ibmappnCosTgRowUsr1MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.14 |
ibmappnCosTgRowUsr1MaxMaximum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.15 |
ibmappnCosTgRowUsr2MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.16 |
ibmappnCosTgRowUsr2MaxA Maximum acceptable value for this
user defined characteristic.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.17 |
ibmappnCosTgRowUsr3MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.18 |
ibmappnCosTgRowUsr3MaxMaximum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.2.6.2.13.6.4.1.19 |
ibmappnSession OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7 |
ibmappnSessGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.1 |
ibmappnSessEndPoint OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.2 |
ibmappcInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.2.1 |
ibmappcInGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.2.1.1 |
ibmappcInGlobeStatusIndicates the current collection options in effect:
1. notActive: collection of counters and some names
is not active.
2. active: collection of counters and some names
is active.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.1.1 |
ibmappcInGlobeRscvIndicates the current collection options in effect:
1. notActive: collection of route selection control vectors
is not active.
2. active: collection of route selection control vectors
is active.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.1.2 |
ibmappcInGlobeRscvTimeTime when the ibmappcInGlobeRscv object last changed.
This time is in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.2.1.1.3 |
ibmappcInGlobeCtrStatusIndicates whether or not the appc session counters
are active. This object reflects the combination of the
ibmappcInGlobeStatus object and any other product
dependant object(s). The values are:
1. notActive: collection of counters and some names
is not active.
2. active: collection of counters and some names
is active.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.1.4 |
ibmappcInGlobeCtrStatusTimeTime when the ibmappcInGlobeCtrStatus object last changed.
This time is in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.2.1.1.5 |
ibmappcInGlobeActSessNumber of currently active APPC sessionsro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.1.6 |
ibmappcInLluTableAPPC Local Lu Table SEQUENCE OF IbmappcInLluEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.2 |
ibmappcInLluEntryEntry of APPC Local Lu Information Table. IbmappcInLluEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1 |
ibmappcInLluLuNameThe network-qualified LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.1 |
ibmappcInLluDefTypeIndicates whether the LU definition was specified in the
nodes system definitions or was dynamically created.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.2 |
ibmappcInLluSessLimitThe maximum number of session supported by this LU.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.3 |
ibmappcInLluBindRspMayQIndicates whether or not a received bind response will
be queued if the LU is not currently active.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.4 |
ibmappcInLluDefaultLuIndicates whether the LU is the default LU for the node.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.5 |
ibmappcInLluCntlPtLuIndicates whether or not the LU is the control point (CP)
LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.6 |
ibmappcInLluCurActSessThe number of currently active sessions.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.7 |
ibmappcInRluTableAPPC Remote Partner Lu Table SEQUENCE OF IbmappcInRluEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.3 |
ibmappcInRluEntryEntry of APPC Remote Partner Lu Information Table. IbmappcInRluEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1 |
ibmappcInRluLocLuNameThe network-qualified local LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.1 |
ibmappcInRluParLuNameThe network-qualified partner LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.2 |
ibmappcInRluParLuLocNameThe network-qualified partner LU local name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.3 |
ibmappcInRluDefTypeIndicates whether the LU definition was specified in the
nodes system definitions or was dynamically created.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.4 |
ibmappcInRluDefParaSessSupDefined Parallel Sessions Supported.
Indicates whether or not multiple session between
the partner LU and its associated local LU are
permitted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.5 |
ibmappcInRluDefCnosSupDefined CNOS Supported.
Indicates whether or not Change Number of Sessions (CNOS)
will be used to negotiate session limits between the
logical points.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.6 |
ibmappcInRluDefAllVerSupDefined Already Verified Accepted.
Indicates whether or not an attach, specifying that TP
security has already been verified, is accepted by the
adjacent CP LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.7 |
ibmappcInRluDefAttSecSupDefined Attach Security Supported.
Indicates whether or not the adjacent CP LU supports
attach security.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.8 |
ibmappcInRluDefSessSecSupDefined Session Security Supported.
Indicates whether or not the adjacent CP LU may omit
a password in the user data portion of the BIND.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.9 |
ibmappcInRluDefEnhanSecSupDefined Enhance Security Supported.
Indicates the level of enhance security support:
1 = none
2 = level 1
3 = level 2ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.10 |
ibmappcInRluActTypeIndicates whether the LU active definitions are
currently active or not currently active.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.11 |
ibmappcInRluActParaSessSupActive Parallel Sessions Supported.
Indicates whether or not multiple session between
the partner LU and its associated local LU are
permitted.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.12 |
ibmappcInRluActCnosSupActive CNOS Supported.
Indicates whether or not Change Number of Sessions (CNOS)
will be used to negotiate session limits between the
logical points.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.13 |
ibmappcInRluActAllVerSupActive Already Verified Accepted.
Indicates whether or not an attach, specifying that TP
security has already been verified, is accepted by the
adjacent CP LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.14 |
ibmappcInRluActAttSecSupActive Attach Security Supported.
Indicates whether or not the adjacent CP LU supports
attach security.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.15 |
ibmappcInRluActSessSecSupActive Session Security Supported.
Indicates whether or not the adjacent CP LU may omit
a password in the user data portion of the BIND.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.16 |
ibmappcInRluActEnhanSecSupActive Enhance Security Supported.
Indicates the level of enhance security support:
1 = none
2 = level 1
3 = level 2ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.17 |
ibmappcInMdTableAPPC Mode Table SEQUENCE OF IbmappcInMdEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.4 |
ibmappcInMdEntryEntry of APPC Mode Information Table. IbmappcInMdEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1 |
ibmappcInMdLluNameThe network-qualified local LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.1 |
ibmappcInMdRluNameThe network-qualified remote LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.2 |
ibmappcInMdModeNameThe mode name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.3 |
ibmappcInMdDefTypeIndicates whether the mode definition was specified in the
nodes system definitions or was dynamically created.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.4 |
ibmappcInMdSessEndTpNameThe session end point transaction program name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.5 |
ibmappcInMdSessLimitSession Limit.
Identifies the total number of sessions that can
be established with the partner LU.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.6 |
ibmappcInMdMaxSessLimitMaximum Session Limit.
Specifies the maximum number of sessions supported
by the LU pair using this mode name.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.7 |
ibmappcInMdAutoActLimitAuto Activate Limit.
Specifies the maximum number of sessions which can
be activated when this mode is active.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.8 |
ibmappcInMdDrainSelfDrain Self.
Indicates whether or not the local LU can be drained.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.9 |
ibmappcInMdDrainPartDrain Partner.
Indicates whether or not the partner LU can be drained.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.10 |
ibmappcInMdMinCwinLimitMinimum Conwinners Limit.
Identifies the minimum number of conwinner sessions.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.11 |
ibmappcInMdMinClosLimitMinimum Conlossers Limit.
Identifies the minimum number of conloser sessions.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.12 |
ibmappcInMdRecvPacWinSzThe size of the receive pacing window.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.13 |
ibmappcInMdSendPacWinSzThe size of the send pacing window.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.14 |
ibmappcInMdPrefRecvRuSzThe preferred receive ru size.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.15 |
ibmappcInMdPrefSendRuSzThe preferred send ru size.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.16 |
ibmappcInMdRecvRuSzUpBndThe receive ru upper boundary size.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.17 |
ibmappcInMdSendRuSzUpBndThe send ru upper boundary size.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.18 |
ibmappcInMdRecvRuSzLoBndThe receive ru lower boundary size.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.19 |
ibmappcInMdSendRuSzLoBndThe send ru lower boundary size.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.20 |
ibmappcInMdDfSyncLvlThe defined sync level.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.21 |
ibmappcInMdAcSyncLvlThe active sync level.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.22 |
ibmappcInMdDfCryptoDefined cryoptograhy supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.23 |
ibmappcInMdAcCryptoActive cryptography supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.24 |
ibmappcInMdReinitThe reinitialization parameter.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.25 |
ibmappcInMdAltCodeAlternate code supported.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.26 |
ibmappcInMdActCwinThe number of active conwinners.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.27 |
ibmappcInMdActClosThe number of active conlosers.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.28 |
ibmappcInMdPndCwinThe number of pending conwinners.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.29 |
ibmappcInMdPndClosThe number of pending conlosers.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.30 |
ibmappcInMdPtmCwinThe number of pending termination conlosers.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.31 |
ibmappcInMdPtmClosThe number of pending termination conwinners.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.32 |
ibmappcInMdFreeSessLstThe size of the free seesion list.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.33 |
ibmappcInMdWaitReqLstThe size of the waiting request list.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.34 |
ibmappcInLtpTableAPPC Local TP Table SEQUENCE OF IbmappcInLtpEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.5 |
ibmappcInLtpEntryEntry of APPC Local TP Information Table. IbmappcInLtpEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1 |
ibmappcInLtpLuNameThe network-qualified local LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.1 |
ibmappcInLtpTpNameThe local transaction program name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.2 |
ibmappcInLtpDefTypeThe TP definition type.
Indicates whether the TP was specified in the nodes system
definitions or was dynamically created.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.3 |
ibmappcInLtpSyncLvlThe TP synchroniztion level.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.4 |
ibmappcInLtpInstLmtThe TP instance limit.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.5 |
ibmappcInLtpInstNumThe number of TP instances.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.6 |
ibmappcInLtpStatusThe TP status.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.7 |
ibmappcInLtpLongRunThe long running transaction program.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.8 |
ibmappcInLtpPfCnosThe TP Change Number of Sessions (CNOS) privileged
function. This parameter specifies whether or not
this program is allowed to issue CNOS verbs.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.9 |
ibmappcInLtpPfSessCntlThe TP Session Control privileged
function. This parameter specifies whether or not
this program is allowed to issue ACTIVATE_SESSION
and DEACTIVATE_SESSION verbs.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.10 |
ibmappcInLtpPfDefineThe TP Define privileged
function. This parameter specifies whether or not
this program is allowed to issue DEFINE and
DELETE verbs.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.11 |
ibmappcInLtpPfDisplayThe TP Display privileged
function. This parameter specifies whether or not
this program is allowed to issue DISPLAY verbs.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.12 |
ibmappcInLtpPfAllocSerThe TP Allocate Service privileged
function. This parameter specifies whether or not
this program is allowed to issue the ALLOCATE
verb with its TPN parameter specifying an SNA
service transmission program.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.13 |
ibmappcInLtpRescSupThe TP resources supported parameter.
1. basic conversations
2. mapped conversations
3. all conversationsro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.14 |
ibmappcInLtpRecoSupThe TP reconnect supported parameter.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.15 |
ibmappcInLtpSecReqThe TP security required parameter.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.16 |
ibmappcInLtpSecLvlThe TP security level parameter.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.17 |
ibmappcInLtpVerPipThe TP verify pip parameter.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.18 |
ibmappcInLtpPipSubNumThe TP number of pip subfields.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.19 |
ibmappcInSsTableAPPC Session Table SEQUENCE OF IbmappcInSsEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.6 |
ibmappcInSsEntryEntry of APPC Session Information Table. IbmappcInSsEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1 |
ibmappcInSsFqLuNameThe network-qualified CP name or PU name of the
node at which the session and cid originated. For APPN
and LEN nodes, this is either CP name of the APPN node at
which the origin LU is located or the CP name of the
NN serving the LEN node at which the origin LU is
located. This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.1 |
ibmappcInSsPcidThe procedure correlation identifier (pcid) of a
session. It is an 8-octet value assigned
by the primary LU.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.2 |
ibmappcInSsPluNameThe primary LU name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.3 |
ibmappcInSsSluNameThe secondary LU name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.4 |
ibmappcInSsModeNameThe Mode Name name used for this session.
This is a 1-8 character name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.5 |
ibmappcInSsCosNameThe Class of Service (COS) name used for this session.
This is a 1-8 character name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.6 |
ibmappcInSsSessTypeThe type of session.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.7 |
ibmappcInSsSessStateIndicates the state of the session.
1. session is pending inactive or,
2. session is pending active or,
3. session is active or,
4. session is inactivero Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.8 |
ibmappcInSsTransPriorityThe transmission priority of this session.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.9 |
ibmappcInSsPaceTypeThe type of pacing used for this session.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.10 |
ibmappcInSsSendMaxRuSzThe maximum ru size which can be sent.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.11 |
ibmappcInSsRecvMaxRuSzThe maximum ru size which can be received.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.12 |
ibmappcInSsEnhanceSecSupEnhanced security supported.
Indicates the level of enhance security support:
1 = none
2 = level 1
3 = level 2ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.13 |
ibmappcInSsSendPacingTypeThe type of pacing being used for sending data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.14 |
ibmappcInSsSendRpcThe send residual pace count. This represents
the number of MU's that can still be
sent in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.15 |
ibmappcInSsSendNxWndwSizeThe size of the next window which will
be used to send data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.16 |
ibmappcInSsRecvPacingTypeThe type of pacing being used for receiving data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.17 |
ibmappcInSsRecvRpcThe receive residual pace count. This represents
the number of MU's that can still be
received in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.18 |
ibmappcInSsRecvNxWndwSizeThe size of the next window which will
be used to receive data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.19 |
ibmappcInSsSessStartTimeTime when the session started in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.20 |
ibmappcInSsSessUpTimeLength of time the session has been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.21 |
ibmappcInSsCtrUpTimeLength of time the session counters have been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.22 |
ibmappcInSsP2SFmdPiusNumber of FMD PIUs sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.23 |
ibmappcInSsS2PFmdPiusNumber of FMD PIUs sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.24 |
ibmappcInSsP2SNonFmdPiusNumber of non-FMD PIUs sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.25 |
ibmappcInSsS2PNonFmdPiusNumber of non-FMD PIUs sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.26 |
ibmappcInSsP2SFmdBytesNumber of FMD Bytes sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.27 |
ibmappcInSsS2PFmdBytesNumber of FMD Bytes sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.28 |
ibmappcInSsP2SNonFmdBytesNumber of non-FMD Bytes sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.29 |
ibmappcInSsS2PNonFmdBytesNumber of non-FMD Bytes sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.30 |
ibmappcInSsRscvThe route selection control vector (RSCV x'2B')
used for this session. It is not present for APPN CP-CP
sessions and also not present for LEN nodes. The
format of this vector is described in SNA Formats.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.31 |
ibmappcInSsStatusTableAPPC Session Status Table SEQUENCE OF IbmappcInSsStatusEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.7 |
ibmappcInSsStatusEntryEntry of APPC Session Status Information Table.
This table is indexed by the SsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps. This provides the management station the ability
to retrieve only the updates to the table by using the
standard GET NEXT. IbmappcInSsStatusEntry .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1 |
ibmappcInSsStatusIndexTable index. The value of the index begins at zero
and is incremented up to a maximum value of 2**31-1
(2,147,483,647) before wrapping.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.1 |
ibmappcInSsStatusTimeTime (in hundreds of a second) since this node was last
initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.2 |
ibmappcInSsStatusTypeIndicates the entry type:
1. Received a negative bind response from the partner LU.
2. Sent a negative bind response to the partner LU.
3. Session activation rejected by the partner LU.
4. Unbind sent to the partner LU.
5. Unbind received from the partner LU.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.3 |
ibmappcInSsStatusLocLuNameThe network-qualified local LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.4 |
ibmappcInSsStatusParLuNameThe network-qualified partner LU name.
This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.5 |
ibmappcInSsStatusModeNameThe mode name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.6 |
ibmappcInSsStatusUnbindTypeThe type of unbind which terminated the session. This
value is consists of one (1) octet; and its meaning
is defined in SNA Formats.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.7 |
ibmappcInSsStatusSenseCodeThe sense code associated with the termination of the
session. This value consists of four (4) octets; and
its meaning is defined in SNA Formats.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.8 |
ibmappcInSsStatusComponentIdThe name of the component which sent the entry.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.9 |
ibmappcInSsStatusDetectModuleThe name of the module which detected the condition
and sent the entry.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.10 |
ibmappnSessIntermediate OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3 |
ibmappnIsInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3.1 |
ibmappnIsInGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3.1.1 |
ibmappnIsInGlobeStatusIndicates the current collection options in effect:
1. notActive: collection of counters and some names
is not active.
2. active: collection of counters and some names
is active.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.1.1 |
ibmappnIsInGlobeRscvIndicates the current collection options in effect:
1. notActive: collection of route selection control vectors
is not active.
2. active: collection of route selection control vectors
is active.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.1.2 |
ibmappnIsInGlobeRscvTimeTime when the ibmappnIsInGlobeRscv object last changed.
This time is in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.1.3 |
ibmappnIsInGlobeCtrStatusIndicates whether or not the intermediate session counters
are active. This object reflects the combination of the
ibmappnIsInGlobeStatus object and the ibmappnIsAcBtypeActive
object. The values are:
1. notActive: collection of counters and some names
is not active.
2. active: collection of counters and some names
is active.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.1.4 |
ibmappnIsInGlobeCtrStatusTimeTime when the ibmappnIsInGlobeCtrStatus object last changed.
This time is in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.1.5 |
ibmappnIsInTableIntermediate Session Information Table SEQUENCE OF IbmappnIsInEntry .1.3.6.1.4.1.2.6.2.13.7.3.1.2 |
ibmappnIsInEntryEntry of Intermediate Session Information Table. IbmappnIsInEntry .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1 |
ibmappnIsInFqLuNameThe network-qualified CP name or PU name of the
node at which the session and cid originated. For APPN
and LEN nodes, this is either CP name of the APPN node at
which the origin LU is located or the CP name of the
NN serving the LEN node at which the origin LU is
located. This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.1 |
ibmappnIsInPcidThe procedure correlation identifier (pcid) of a
session. It is an 8-octet value assigned
by the primary LU.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.2 |
ibmappnIsInPriLuNameThe primary LU name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.3 |
ibmappnIsInSecLuNameThe secondary LU name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.4 |
ibmappnIsInModeNameThe Mode Name name used for this session.
This is a 1-8 character name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.5 |
ibmappnIsInCosNameThe Class of Service (COS) name used for this session.
This is a 1-8 character name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.6 |
ibmappnIsInTransPriorityThe transmission priority of this session.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.7 |
ibmappnIsInSessTypeThe type of intermediate session.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.8 |
ibmappnIsInSessStateIndicates the state of the session.
1. session is pending inactive or,
2. session is pending active or,
3. session is active or,
4. session is inactive
Existing sessions can be deactivated by setting
this object to inactive.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.9 |
ibmappnIsInSessStartTimeTime when the session started in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.10 |
ibmappnIsInSessUpTimeLength of time the session has been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.11 |
ibmappnIsInCtrUpTimeLength of time the session counters have been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.12 |
ibmappnIsInP2SFmdPiusNumber of FMD PIUs sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.13 |
ibmappnIsInS2PFmdPiusNumber of FMD PIUs sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.14 |
ibmappnIsInP2SNonFmdPiusNumber of non-FMD PIUs sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.15 |
ibmappnIsInS2PNonFmdPiusNumber of non-FMD PIUs sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.16 |
ibmappnIsInP2SFmdBytesNumber of FMD Bytes sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.17 |
ibmappnIsInS2PFmdBytesNumber of FMD Bytes sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.18 |
ibmappnIsInP2SNonFmdBytesNumber of non-FMD Bytes sent from the Primary LU
to the Secondary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.19 |
ibmappnIsInS2PNonFmdBytesNumber of non-FMD Bytes sent from the Secondary LU
to the Primary LUro Counter .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.20 |
ibmappnIsInPsAdjCpNameThe primary stage adjacent CP name of this session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.21 |
ibmappnIsInPsAdjTgNumThe primary stage adjacent transmission group (TG) number
associated with this session.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.22 |
ibmappnIsInPsSendMaxBtuSizeThe primary stage maximum basic transmission size (BTU)
for sending data.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.23 |
ibmappnIsInPsSendPacingTypeThe primary stage type of pacing being used
for sending data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.24 |
ibmappnIsInPsSendRpcThe primary stage send residual pace count. This represents
the primary stage number of MU's that can still be sent
in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.25 |
ibmappnIsInPsSendNxWndwSizeThe primary stage size of the next window which will
be used to send data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.26 |
ibmappnIsInPsRecvPacingTypeThe primary stage type of pacing being used
for receiving data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.27 |
ibmappnIsInPsRecvRpcThe primary stage receive residual pace count. This represents
the primary stage number of MU's that can still be
received in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.28 |
ibmappnIsInPsRecvNxWndwSizeThe primary stage size of the next window which will
be used to receive data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.29 |
ibmappnIsInSsAdjCpNameThe secondary stage adjacent CP name of this session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.30 |
ibmappnIsInSsAdjTgNumThe secondary stage adjacent transmission group (TG) number
associated with this session.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.31 |
ibmappnIsInSsSendMaxBtuSizeThe secondary stage maximum basic transmission size (BTU)
for sending data.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.32 |
ibmappnIsInSsSendPacingTypeThe secondary stage type of pacing being used
for sending data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.33 |
ibmappnIsInSsSendRpcThe secondary stage send residual pace count. This represents
the secondary stage number of MU's that can still be sent
in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.34 |
ibmappnIsInSsSendNxWndwSizeThe secondary stage size of the next window which will
be used to send data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.35 |
ibmappnIsInSsRecvPacingTypeThe secondary stage type of pacing being used
for receiving data.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.36 |
ibmappnIsInSsRecvRpcThe secondary stage send residual pace count. This represents
the secondary stage number of MU's that can still be
received in the current session window.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.37 |
ibmappnIsInSsRecvNxWndwSizeThe secondary stage size of the next window which will
be used to receive data.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.38 |
ibmappnIsInRouteInfoThe route selection control vector (RSCV x'2B')
used for this session. It is present for APPN nodes;
but is not present for LEN nodes. The format of this
vector is described in SNA Formats.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.39 |
ibmappnIsAccounting OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3.2 |
ibmappnIsAcGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.7.3.2.1 |
ibmappnIsAcGlobeStatusThis object indicates the current status for accounting
type.
1. indicates collection is not active for any media type.
2. indicates collection is active for at least one media
type; and that media is not full.
3. indicates collection is active for at least one media
type; but all active medias are full.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.1.1 |
ibmappnIsAcGlobeByteThreshThe byte threshold for recording accounting information
for an active session.
If the total of the byte counters (FmdBytes and NonFmdBtyes)
is an even multiple of this non-zero value, statistics for
this session will be recorded to all active buffers.
A value of zero indicates that no byte threshold has been set.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.2 |
ibmappnIsAcGlobeCheckPtBy setting this value to yes, the agent will collect
accounting information for all active sessions. This
information will be recorded to all active buffers.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.1.3 |
ibmappnIsAcGlobeMgrUtcSecsThe managers Coordinated Universal Time (UTC) seconds.
It contains an integer from 0 to 59.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.4 |
ibmappnIsAcGlobeMgrUtcMinsThe managers Coordinated Universal Time (UTC) minutes.
It contains an integer from 0 to 59.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.5 |
ibmappnIsAcGlobeMgrUtcHoursThe managers Coordinated Universal Time (UTC) hours.
It contains an integer from 0 to 23.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.6 |
ibmappnIsAcGlobeMgrUtcMdaysThe managers Coordinated Universal Time (UTC) day of
the month.
It contains an integer from 1 to 31; or 0 if
the manager has not set this object.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.7 |
ibmappnIsAcGlobeMgrUtcMonthsThe managers Coordinated Universal Time (UTC) months
since January.
It contains an integer from 0 to 11.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.1.8 |
ibmappnIsAcGlobeMgrUtcYearsThe managers Coordinated Universal Time (UTC) years
since 1900.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.9 |
ibmappnIsAcGlobeMgrUtcWdaysThe managers Coordinated Universal Time (UTC) days since
Sunday.
It contains an integer from 0 to 6.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.1.10 |
ibmappnIsAcGlobeMgrUtcYdaysThe managers Coordinated Universal Time (UTC) days since
January 1.
It contains an integer from 0 to 365.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.11 |
ibmappnIsAcGlobeMgrUtcIsdstThe managers Coordinated Universal Time (UTC) daylight
saving time flag.
It is positive if daylight saving time is in effect.
It is zero if daylight saving time is not in effect.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.1.12 |
ibmappnIsAcGlobeMgrNameThe name of the manager who set the manager UTC times or NULL if
the manager name has not been set.
It contains:
a. the network id of the manager,
b. a period (.)
c. the cp name of the manager.
By setting this value, the agent will create time record
with its corresponding time and name. When setting this object,
the manager should also set all other ibmappnIsAcGlobeMgr objects
with the same SET operation.rw DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.1.13 |
ibmappnIsAcBtypeTableIntermediate Session Accounting Buffer Type Table SEQUENCE OF IbmappnIsAcBtypeEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.2 |
ibmappnIsAcBtypeEntryEntry of Intermediate Session Accounting
Buffer Type Table. IbmappnIsAcBtypeEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1 |
ibmappnIsAcBtypeMediaThe media for storing the intermediate session
accounting records.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.1 |
ibmappnIsAcBtypeActiveIndicates whether or not the buffer media is active.
1. no: indicates the buffer media is not currently
used for recording.
2. yes: indicates the buffer media is currently being
used for recording.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.2 |
ibmappnIsAcBtypeDirNameThe name of the directory which will be used to allocate
and write buffers of this type. For memory buffer types,
this field will be NULL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.3 |
ibmappnIsAcBtypePrdMaxBufsThe maximum number of buffer medias supported by the product.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.4 |
ibmappnIsAcBtypeMaxBufsThe maximum number of buffer medias which will be used for
recording accounting information. This value must be
in the range of zero to the Product Maximum.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.5 |
ibmappnIsAcBtypeCurBufsThe current number of buffer media. This is the sum
of all full and in use buffers of this type.ro Gauge .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.6 |
ibmappnIsAcBtypePrdRecPerBufThe maximum number of records supported by the product.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.7 |
ibmappnIsAcBtypeRecPerBufThe maximum number of records which will be recorded
in an individual buffer. This value must be
in the range of zero to the Product Maximum.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.8 |
ibmappnIsAcBtypeRecFormatThis defines the recording format of records.
(1) ascii: records are recorded in ascii
(english text format)
(2) binary: records are recorded in binary
(machine readable format)rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.9 |
ibmappnIsAcBtypeFullActionThis defines the behaviour used when all buffer medias
are full.
(1) halt: stop creating new records
(2) wrap: overwrite the existing records.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.10 |
ibmappnIsAcBtypeFullTimeThe time which the full condition was encountered.
This time is represented in hundreds of a second
since the node was started.
2**32-1 (4,294,967,295), and wraps.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.11 |
ibmappnIsAcBtypeFullReasonThe reason the buffer media is full.
(1) The media is not full.
(2) The maximum number of buffers have been reach,
all buffers are full and
the full action is halt.
(3) The maximum number of buffers is zero or
the maximum number of records is less than 5 or
a unique record number cannot be generated.
(4) Unable to write to the media due to I/O errors.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.12 |
ibmappnIsAcBtypeFullWrapsThe number of accounting records being overwritten due
to buffer full situation.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.13 |
ibmappnIsAcBtypeFullLostsThe number of new accounting records lost due to
the buffer full situation.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.14 |
ibmappnIsAcBtypeErrorWrapsThe number of accounting records lost to due to other
reasons, (e.g. I/O error, software error) while in
a wrap condition.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.15 |
ibmappnIsAcBtypeErrorLostsThe number of accounting records lost to due to other
reasons, (e.g. I/O error, software error) while not in
a full condition.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.16 |
ibmappnIsAcBtypeCheckPtsThe number of times a buffer of this type has been
recorded to for checkpointing active intermediate
sessions.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.17 |
ibmappnIsAcBtypePurgesThe number of times a buffer of this type has been purged.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.18 |
ibmappnIsAcBtypeDeletesThe number of times an entry has been deleted from
a buffer of this type.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.19 |
ibmappnIsAcBtypeResetsThe number of times the Btype counters have been
reset as a result of a SET.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.20 |
ibmappnIsAcBtypeClearStatsBy setting this object to yes, all statistics for this media type
will be cleared (set to zero); and the Btype reset counter
will be incremented. Objects affected by this
include:
- ibmappnIsAcBtypeFullTime
- ibmappnIsAcBtypeFullReason
- ibmappnIsAcBtypeFullWraps
- ibmappnIsAcBtypeFullLosts
- ibmappnIsAcBtypeErrorWraps
- ibmappnIsAcBtypeErrorLosts
- ibmappnIsAcBtypeCheckPts
- ibmappnIsAcBtypePurges
- ibmappnIsAcBtypeDeletesrw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.21 |
ibmappnIsAcBufTableIntermediate Session Accounting Buffer Table SEQUENCE OF IbmappnIsAcBufEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.3 |
ibmappnIsAcBufEntryEntry of Intermediate Session Accounting
Buffer Table. IbmappnIsAcBufEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1 |
ibmappnIsAcBufMediaThe media for storing the intermediate session
accounting records.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.1 |
ibmappnIsAcBufNumberNumber of the buffer. Each time a new
buffer is used for recording, an incremented number
will be assigned. Thus, the order of in which
the buffers filled can be determined.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.2 |
ibmappnIsAcBufStateThe current buffer state.
1. complete: indicates the buffer is full or
recording is not active for this buffer.
In either case, the buffer is ready to
be retrieved.
This value may be specified in a SET operation to
change a buffers state from active to complete.
2. active: indicates the buffer is currently being
used for recording.
This value is not valid for use in a SET operation.
3. purge: indicates the buffer should be purged.
This value may be specified in a SET operation to
remove a buffer. Specification of this value is only
valid for complete buffers. It is not valid
for active buffers.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.3 |
ibmappnIsAcBufRecFormatThis defines the recording format of records.
(1) ascii: records are recorded in ascii
(english text format)
(2) binary: records are recorded in binary
(machine readable format)ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.4 |
ibmappnIsAcBufMaxRecordsThe maximum number of records this buffer may contain. It is
derived from the number of records per buffer set in the buffer
type table.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.5 |
ibmappnIsAcBufOldestIndexThe oldest accounting index contained in this buffer.
By setting this object, all records with indexes less than
this value will be deleted. The set value must be greater
than or equal to the current oldest index and less than or
equal to the current newest index. Setting of this object
will not be honored for all types of buffers.rw INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.6 |
ibmappnIsAcBufNewestIndexThe newest accounting index contained in this buffer.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.7 |
ibmappnIsAcBufNameThe name of the buffer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.8 |
ibmappnIsAcTimeTableIntermediate Session Accounting Time Table SEQUENCE OF IbmappnIsAcTimeEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.4 |
ibmappnIsAcTimeEntryEntry of Intermediate Session Accounting Time Table. IbmappnIsAcTimeEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1 |
ibmappnIsAcTimeIndexIntermediate Session Time record index. It starts
with 0, and increase up to maximum value of
2**31-1 (2,147,483,647), and wraps.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.1 |
ibmappnIsAcTimeEntryTypeIndicates whether the entry was made as the result of:
1. a SET to start collecting accounting data, or
2. a SET to stop collecting accounting data, or
3. the creation of a new media to store accounting data, or
4. a media was full and wrapped (over writing records), or
5. the system time changed, or
6. a manager set the manager times and/or manager name, or
7. the record format for this media changed, or
8. time reference for the mediaro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.2 |
ibmappnIsAcTimeForMediaThis object qualifies the time entry type. It indicates
the media type for which the entry occured.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.3 |
ibmappnIsAcTimeRecTimeIntermediate Session Record time. It represents
the time in hundreds of a second since the node
was started. 2**32-1 (4,294,967,295), and wraps.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.4 |
ibmappnIsAcTimeAgtUtcSecsThe agents Coordinated Universal Time (UTC) seconds.
It contains an integer from 0 to 59.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.5 |
ibmappnIsAcTimeAgtUtcMinsThe agents Coordinated Universal Time (UTC) minutes.
It contains an integer from 0 to 59.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.6 |
ibmappnIsAcTimeAgtUtcHoursThe agents Coordinated Universal Time (UTC) hours.
It contains an integer from 0 to 23.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.7 |
ibmappnIsAcTimeAgtUtcMdaysThe agents Coordinated Universal Time (UTC) day of
the month.
It contains an integer from 1 to 31.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.8 |
ibmappnIsAcTimeAgtUtcMonthsThe agents Coordinated Universal Time (UTC) months
since January.
It contains an integer from 0 to 11.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.9 |
ibmappnIsAcTimeAgtUtcYearsThe agents Coordinated Universal Time (UTC) years
since 1900.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.10 |
ibmappnIsAcTimeAgtUtcWdaysThe agents Coordinated Universal Time (UTC) days since
Sunday.
It contains an integer from 0 to 6.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.11 |
ibmappnIsAcTimeAgtUtcYdaysThe agents Coordinated Universal Time (UTC) days since
January 1.
It contains an integer from 0 to 365.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.12 |
ibmappnIsAcTimeAgtUtcIsdstThe agents Coordinated Universal Time (UTC) daylight
saving time flag.
It is positive if daylight saving time is in effect.
It is zero if daylight saving time is not in effect.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.13 |
ibmappnIsAcTimeAgtNameThe name of the agent who set the agent UTC times.
It contains:
a. the network id of the agent,
b. a period (.)
c. the cp name of the agent.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.14 |
ibmappnIsAcTimeMgrUtcSecsThe managers Coordinated Universal Time (UTC) seconds.
It contains an integer from 0 to 59.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.15 |
ibmappnIsAcTimeMgrUtcMinsThe managers Coordinated Universal Time (UTC) minutes.
It contains an integer from 0 to 59.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.16 |
ibmappnIsAcTimeMgrUtcHoursThe managers Coordinated Universal Time (UTC) hours.
It contains an integer from 0 to 23.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.17 |
ibmappnIsAcTimeMgrUtcMdaysThe managers Coordinated Universal Time (UTC) day of
the month.
It contains an integer from 1 to 31; or 0 if
the manager has not set this object.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.18 |
ibmappnIsAcTimeMgrUtcMonthsThe managers Coordinated Universal Time (UTC) months
since January.
It contains an integer from 0 to 11.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.19 |
ibmappnIsAcTimeMgrUtcYearsThe managers Coordinated Universal Time (UTC) years
since 1900.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.20 |
ibmappnIsAcTimeMgrUtcWdaysThe managers Coordinated Universal Time (UTC) days since
Sunday.
It contains an integer from 0 to 6.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.21 |
ibmappnIsAcTimeMgrUtcYdaysThe managers Coordinated Universal Time (UTC) days since
January 1.
It contains an integer from 0 to 365.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.22 |
ibmappnIsAcTimeMgrUtcIsdstThe managers Coordinated Universal Time (UTC) daylight
saving time flag.
It is positive if daylight saving time is in effect.
It is zero if daylight saving time is not in effect.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.23 |
ibmappnIsAcTimeMgrNameThe name of the manager who set the manager UTC times or NULL if
the manager name has not been set.
It contains:
a. the network id of the manager,
b. a period (.)
c. the cp name of the manager.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.24 |
ibmappnIsAcTimeMgrTimeValidThis indicates whether or not the the manager UTC times
are valid. It is set by the manager if the manager
determines the manager UTC times are valid.rw Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.25 |
ibmappnIsAcDataTableIntermediate Session Accounting Data Table SEQUENCE OF IbmappnIsAcDataEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.5 |
ibmappnIsAcDataEntryEntry of Intermediate Session Accounting Data Table. IbmappnIsAcDataEntry .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1 |
ibmappnIsAcIndexSession accounting record index. Upon initial startup, it
will begin with 0, and increase up to maximum value of
2**31-1 (2,147,483,647), and wraps. Upon subsequent startups,
it will be initialized with the value of the oldest index
in any media type; or 0 if no indices are found.ro INTEGER .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.1 |
ibmappnIsAcEntryTypeIndicates whether the entry was made as the result of:
1. a session starting or,
2. a session ending or,
3. a session threshold reached or
4. a session checkpoint requestro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.2 |
ibmappnIsAcRecTimeIntermediate Session Record time. It represents
the time in hundreds of a second since the node
was started. 2**32-1 (4,294,967,295), and wraps.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.3 |
ibmappnIsAcFqLuNameThe network-qualified CP name or PU name of the
node at which the session and pcid originated. For APPN
and LEN nodes, this is either CP name of the APPN node at
which the origin LU is located or the CP name of the
NN serving the LEN node at which the origin LU is
located. This field is from 3 to 17 characters in
length, including a period (.) which separates the
NetId from the NAU name.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.4 |
ibmappnIsAcPcidThe procedure correlation identifier (pcid) of a
session. It is an 8-octet value assigned
by the primary LU.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.5 |
ibmappnIsAcPriLuNamePrimary LU Name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.6 |
ibmappnIsAcSecLuNameSecondary LU Name of the session.ro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.7 |
ibmappnIsAcModeNameThe mode name used for this sessionro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.8 |
ibmappnIsAcCosNameThe class of service (cos) used for this sessionro DisplayString .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.9 |
ibmappnIsAcTransPriorityTransmission priority for this session.
The values are:
1. Low
2. Medium
3. High
4. Networkro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.10 |
ibmappnIsAcSessTypeThe type of intermediate session.ro Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.11 |
ibmappnIsAcSessStateIndicates the state of the session.
1. session is pending inactive or,
2. session is pending active or,
3. session is active or,
4. session is inactivero Enumeration .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.12 |
ibmappnIsAcSessStartTimeTime when the session started in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.13 |
ibmappnIsAcSessUpTimeLength of time the session has been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.14 |
ibmappnIsAcCtrUpTimeLength of time the session counters have been active
in hundreds of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.15 |
ibmappnIsAcEndReasonThe SNA sense code which resulted when the session
ended.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.16 |
ibmappnIsAcP2SFmdPiusThe number of FMD PIU's sent from the primary LU
to the secondary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.17 |
ibmappnIsAcS2PFmdPiusThe number of FMD PIU's sent from the secondary LU
to the primary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.18 |
ibmappnIsAcP2SNonFmdPiusThe number of non-FMD PIU's sent from the primary LU
to the secondary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.19 |
ibmappnIsAcS2PNonFmdPiusThe number of non-FMD PIU's sent from the secondary LU
to the primary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.20 |
ibmappnIsAcP2SFmdBytesThe number of FMD bytes sent from the primary LU
to the secondary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.21 |
ibmappnIsAcS2PFmdBytesThe number of FMD bytes sent from the secondary LU
to the primary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.22 |
ibmappnIsAcP2SNonFmdBytesThe number of non-FMD bytes sent from the primary LU
to the secondary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.23 |
ibmappnIsAcS2PNonFmdBytesThe number of non-FMD bytes sent from the secondary LU
to the primary LU. The counter has a range of
of 0 to 2**32; and then wraps.ro Counter .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.24 |
ibmappnIsAcRouteInfoThe route selection control vector (RSCV x'2B')
used for this session. It is present for APPN nodes;
but is not present for LEN nodes.ro OCTET STRING .1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.25 |
ibmappnConversation OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.8 |
ibmappnConvGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.8.1 |
ibmappnConvEndPoint OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.13.8.2 |
ibmrpq OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.14 |
ibmtb OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15 |
ibmdot1dBase OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.1 |
ibmdot1dBaseBridgeAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with ibmdot1dStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.1.1 |
ibmdot1dBaseNumPortsThe number of TB ports controlled by this bridging
entity.ro INTEGER .1.3.6.1.4.1.2.6.2.15.1.2 |
ibmdot1dBaseTypeIndicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.ro Enumeration .1.3.6.1.4.1.2.6.2.15.1.3 |
ibmdot1dBasePortTableA table that contains generic information about
every port that is associated with this bridge. SEQUENCE OF IbmDot1dBasePortEntry .1.3.6.1.4.1.2.6.2.15.1.4 |
ibmdot1dBasePortEntryA list of information for each port of the
bridge. IbmDot1dBasePortEntry .1.3.6.1.4.1.2.6.2.15.1.4.1 |
ibmdot1dBasePortThe port number of the port for which this entry
contains bridge management information.ro INTEGER .1.3.6.1.4.1.2.6.2.15.1.4.1.1 |
ibmdot1dBasePortIfIndexThe value of the instance of the ifIndex object,
defined in RFC 1156, RFC 1213 for the interface
corresponding to this port.ro INTEGER .1.3.6.1.4.1.2.6.2.15.1.4.1.2 |
ibmdot1dBasePortCircuitFor a port which potentially has the same value
of ibmdot1dBasePortIfIndex as another port on the
same bridge, this object contains an identifier
unique to this port. For example, in the case
where multiple ports correspond one-to-one
with multiple Frame Relay circuit's, this
value provides the object identifier for the
frame relay MIB.
Fpr a port which has a unique value of
ibmdot1dBasePortIfIndex, this object can
have the value {0.0}.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.1.4.1.3 |
ibmdot1dBasePortDelayExceededDiscardsThe number of frames discarded by this port due
to excessive transit delay through the bridge.ro Counter .1.3.6.1.4.1.2.6.2.15.1.4.1.4 |
ibmdot1dBasePortMtuExceededDiscardsThe number of frames discarded by this port due
to an excessive size.ro Counter .1.3.6.1.4.1.2.6.2.15.1.4.1.5 |
ibmdot1dStp OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.2 |
ibmdot1dStpProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.2.6.2.15.2.1 |
ibmdot1dStpPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
ibmdot1dBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.2.6.2.15.2.2 |
ibmdot1dStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2.6.2.15.2.3 |
ibmdot1dStpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.2.6.2.15.2.4 |
ibmdot1dStpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.2.5 |
ibmdot1dStpRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.2.6.2.15.2.6 |
ibmdot1dStpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.2.6.2.15.2.7 |
ibmdot1dStpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro INTEGER -- a STP timer in units of 1/100 seconds .1.3.6.1.4.1.2.6.2.15.2.8 |
ibmdot1dStpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro INTEGER -- a STP timer in units of 1/100 seconds .1.3.6.1.4.1.2.6.2.15.2.9 |
ibmdot1dStpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.2.6.2.15.2.10 |
ibmdot1dStpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state. For example, how long a port stays in
the Listening state when moving from Blocking to
Learning. This value is also used, when a
topology change has been detected and is underway,
to age all dynamic entries in the Forwarding
Database. (Note that this value is the one that
this bridge is currently using, in contrast to
ibmdot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.)ro INTEGER -- a STP timer in units of 1/100 seconds .1.3.6.1.4.1.2.6.2.15.2.11 |
ibmdot1dStpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1d/D9 specifies that the range for this
parameter is related to the value of
ibmdot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1d/D9 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
The IBM 6611 Network Processor obtains this value
from the 'Max Age' parameter provided to
the configuration program.rw Timeout .1.3.6.1.4.1.2.6.2.15.2.12 |
ibmdot1dStpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by
802.1d/D9 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.
The IBM 6611 Network Processor obtains this value
from the 'Hello Time' parameter provided to
the configuration program.rw Timeout .1.3.6.1.4.1.2.6.2.15.2.13 |
ibmdot1dStpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1d/D9 specifies that the range for this
parameter is related to the value of
ibmdot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1d/D9 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
The IBM 6611 Network Processor obtains this value
from the 'Forward Delay Time' parameter provided to
the configuration program.rw Timeout .1.3.6.1.4.1.2.6.2.15.2.14 |
ibmdot1dStpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF IbmDot1dStpPortEntry .1.3.6.1.4.1.2.6.2.15.2.15 |
ibmdot1dStpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. IbmDot1dStpPortEntry .1.3.6.1.4.1.2.6.2.15.2.15.1 |
ibmdot1dStpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.
This port number is the same as that reported by
ibmdot1dBasePort.ro INTEGER .1.3.6.1.4.1.2.6.2.15.2.15.1.1 |
ibmdot1dStpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
ibmdot1dStpPort.rw INTEGER .1.3.6.1.4.1.2.6.2.15.2.15.1.2 |
ibmdot1dStpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see ibmdot1dStpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.2.6.2.15.2.15.1.3 |
ibmdot1dStpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.2.6.2.15.2.15.1.4 |
ibmdot1dStpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port.
The IBM 6611 Network Processor obtains this value
from the 'Path Cost' parameter provided to
the configuration program.rw INTEGER .1.3.6.1.4.1.2.6.2.15.2.15.1.5 |
ibmdot1dStpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.2.15.1.6 |
ibmdot1dStpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.2.6.2.15.2.15.1.7 |
ibmdot1dStpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.2.15.1.8 |
ibmdot1dStpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.2.15.1.9 |
ibmdot1dStpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.2.6.2.15.2.15.1.10 |
ibmdot1dTp OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.3 |
ibmdot1dTpLearnedEntryDiscardsThe total number of Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent.ro Counter .1.3.6.1.4.1.2.6.2.15.3.1 |
ibmdot1dTpAgingTimeThe timeout period in seconds for aging out
dynamically learned forwarding information.
The IBM 6611 Network Processor obtains this value
from the 'Aging Time' parameter provided to
the configuration program.rw INTEGER .1.3.6.1.4.1.2.6.2.15.3.2 |
ibmdot1dTpFdbTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame. SEQUENCE OF IbmDot1dTpFdbEntry .1.3.6.1.4.1.2.6.2.15.3.3 |
ibmdot1dTpFdbEntryInformation about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information. IbmDot1dTpFdbEntry .1.3.6.1.4.1.2.6.2.15.3.3.1 |
ibmdot1dTpFdbAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.3.3.1.1 |
ibmdot1dTpFdbPortEither the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of ibmdot1dTpFdbAddress has been seen. A value of
'0' indicates that the port number has not been
learned but that the bridge does have some
forwarding/filtering information about this
address (e.g. in the ibmdot1dStaticTable).
Implementors are encouraged to assign the port
value to this object whenever it is learned even
for addresses for which the corresponding value of
ibmdot1dTpFdbStatus is not learned(3).ro INTEGER .1.3.6.1.4.1.2.6.2.15.3.3.1.2 |
ibmdot1dTpFdbStatusThe status of this entry. The meanings of the
values are:
other(1) : none of the following. This would
include the case where some other
MIB object (not the corresponding
instance of ibmdot1dTpFdbPort, nor an
entry in the ibmdot1dStaticTable) is
being used to determine if and how
frames addressed to the value of
the corresponding instance of
ibmdot1dTpFdbAddress are being
forwarded.
invalid(2) : this entry is not longer valid
(e.g., it was learned but has since
aged-out), but has not yet been
flushed from the table.
learned(3) : the value of the corresponding
instance of ibmdot1dTpFdbPort was
learned, and is being used.
self(4) : the value of the corresponding
instance of ibmdot1dTpFdbAddress
represents one of the bridge's
addresses. The corresponding
instance of ibmdot1dTpFdbPort
indicates which of the bridge's
ports has this address.
mgmt(5) : the value of the corresponding
instance of ibmdot1dTpFdbAddress is
also the value of an existing
instance of ibmdot1dStaticAddress.ro Enumeration .1.3.6.1.4.1.2.6.2.15.3.3.1.3 |
ibmdot1dTpPortTableA table that contains information about every
port that is associated with this transparent
bridge. SEQUENCE OF IbmDot1dTpPortEntry .1.3.6.1.4.1.2.6.2.15.3.4 |
ibmdot1dTpPortEntryA list of information for each port of a
transparent bridge. IbmDot1dTpPortEntry .1.3.6.1.4.1.2.6.2.15.3.4.1 |
ibmdot1dTpPortThe port number of the port for which this entry
contains Transparent bridging management
information.ro INTEGER .1.3.6.1.4.1.2.6.2.15.3.4.1.1 |
ibmdot1dTpPortMaxInfoThe maximum size of the INFO (non-MAC) field that
this port will receive or transmit.ro INTEGER .1.3.6.1.4.1.2.6.2.15.3.4.1.2 |
ibmdot1dTpPortInFramesThe number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function.ro Counter .1.3.6.1.4.1.2.6.2.15.3.4.1.3 |
ibmdot1dTpPortOutFramesThe number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function.ro Counter .1.3.6.1.4.1.2.6.2.15.3.4.1.4 |
ibmdot1dTpPortInDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process.ro Counter .1.3.6.1.4.1.2.6.2.15.3.4.1.5 |
ibmdot1dStatic OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.4 |
ibmdot1dStaticTableA table containing filtering information
configured into the bridge by (local or network)
management specifying the set of ports to which
frames received from specific ports and containing
specific destination addresses are allowed to be
forwarded. The value of zero in this table as the
port number from which frames with a specific
destination address are received, is used to
specify all ports for which there is no specific
entry in this table for that particular
destination address. Entries are valid for
unicast and for group/broadcast addresses. SEQUENCE OF IbmDot1dStaticEntry .1.3.6.1.4.1.2.6.2.15.4.1 |
ibmdot1dStaticEntryFiltering information configured into the bridge
by (local or network) management specifying the
set of ports to which frames received from a
specific port and containing a specific
destination address are allowed to be forwarded. IbmDot1dStaticEntry .1.3.6.1.4.1.2.6.2.15.4.1.1 |
ibmdot1dStaticAddressThe destination MAC address in a frame to which
this entry's filtering information applies. This
object can take the value of a unicast address, a
group address or the broadcast address.rw OCTET STRING .1.3.6.1.4.1.2.6.2.15.4.1.1.1 |
ibmdot1dStaticReceivePortEither the value '0', or the port number of the
port from which a frame must be received in order
for this entry's filtering information to apply.
A value of zero indicates that this entry applies
on all ports of the bridge for which there is no
other applicable entry.rw INTEGER .1.3.6.1.4.1.2.6.2.15.4.1.1.2 |
ibmdot1dStaticAllowedToGoToThe set of ports to which frames received from a
specific port and destined for a specific MAC
address, are allowed to be forwarded. Each octet
within the value of this object specifies a set of
eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.)rw OCTET STRING .1.3.6.1.4.1.2.6.2.15.4.1.1.3 |
ibmdot1dStaticStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will
remain so are different from each of the
following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset
of the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently
in use and will remain so until it is
aged out.rw Enumeration .1.3.6.1.4.1.2.6.2.15.4.1.1.4 |
ibmtbMACAddressFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.5 |
ibmtbmacFiltInfoTableTable of MAC address filtering information. SEQUENCE OF TBMacAddrFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.5.1 |
ibmtbmacFiltInfoEntryMAC address filtering information for a single interface. TBMacAddrFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.5.1.1 |
ibmtbmacFiltIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.5.1.1.1 |
ibmtbmacFiltInFilterTypeFor the incoming filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.15.5.1.1.2 |
ibmtbmacFiltOutFilterTypeFor the outgoing filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.15.5.1.1.3 |
ibmtbmacFiltInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.5.1.1.4 |
ibmtbmacFiltOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.5.1.1.5 |
ibmtbmacFiltInTableTable of MAC address filtering information
for incoming frames. SEQUENCE OF TBMacAddrFilterInEntry .1.3.6.1.4.1.2.6.2.15.5.2 |
ibmtbmacFiltInEntryFiltering information for incoming frames. TBMacAddrFilterInEntry .1.3.6.1.4.1.2.6.2.15.5.2.1 |
ibmtbmacFiltInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.5.2.1.1 |
ibmtbmacFiltInSrcAddressMAC source address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.2.1.2 |
ibmtbmacFiltInSrcMaskMask to allow ibmtbmacFiltInSrcAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.2.1.3 |
ibmtbmacFiltInDestAddressMAC destination address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.2.1.4 |
ibmtbmacFiltInDestMaskMask to allow ibmtbmacFiltInDestAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.2.1.5 |
ibmtbmacFiltOutTableTable of MAC address filtering information
for outgoing frames. SEQUENCE OF TBMacAddrFilterOutEntry .1.3.6.1.4.1.2.6.2.15.5.3 |
ibmtbmacFiltOutEntryFiltering information for outgoing frames. TBMacAddrFilterOutEntry .1.3.6.1.4.1.2.6.2.15.5.3.1 |
ibmtbmacFiltOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.5.3.1.1 |
ibmtbmacFiltOutSrcAddressMAC source address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.3.1.2 |
ibmtbmacFiltOutSrcMaskMask to allow ibmtbmacFiltOutSrcAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.3.1.3 |
ibmtbmacFiltOutDestAddressMAC destination address to be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.3.1.4 |
ibmtbmacFiltOutDestMaskMask to allow ibmtbmacFiltOutDestAddress to be used
as a range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.5.3.1.5 |
ibmtbSAPFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.6 |
ibmtbsapFiltInfoTableTable of SAP filtering information. SEQUENCE OF TBSapFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.6.1 |
ibmtbsapFiltInfoEntrySAP filtering information for a single interface. TBSapFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.6.1.1 |
ibmtbsapFiltIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.6.1.1.1 |
ibmtbsapFiltInA bitmap of all possible source SAPs (even) that will
be on or off depending on whether or not an incoming
frame with that SAP is to be forwarded.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.6.1.1.2 |
ibmtbsapFiltOutA bitmap of all possible source SAPs (even) that will
be on or off depending on whether or not an outgoing
frame with that SAP is to be forwarded.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.6.1.1.3 |
ibmtbsapFiltInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.6.1.1.4 |
ibmtbsapFiltOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.6.1.1.5 |
ibmtbEthTypeFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.7 |
ibmtbEthTypeFiltInfoTableTable of Ethernet type filtering information. Note that
this filtering only applies to:
1) The Ethernet TYPE field for DIX version 2 frames.
2) The Ethernet TYPE field contained in the SNAP
header of 802.3 frames, if the frame contains a
SNAP header (SSAP = DSAP = 0xAA) SEQUENCE OF TBEthTypeFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.7.1 |
ibmtbEthTypeFiltInfoEntryEthernet type filtering information for a single interface. TBEthTypeFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.7.1.1 |
ibmtbEthTypeFiltIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.7.1.1.1 |
ibmtbEthTypeFiltInFilterTypeFor the incoming Ethernet type filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.15.7.1.1.2 |
ibmtbEthTypeFiltOutFilterTypeFor the outgoing Ethernet type filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.15.7.1.1.3 |
ibmtbEthTypeFiltInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.7.1.1.4 |
ibmtbEthTypeFiltOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.7.1.1.5 |
ibmtbEthTypeFiltInTableTable of Ethernet type filtering information
for incoming frames. Note that
this filtering only applies to:
1) The Ethernet TYPE field for DIX version 2 frames.
2) The Ethernet TYPE field contained in the SNAP
header of 802.3 frames, if the frame contains a
SNAP header (SSAP = DSAP = 0xAA) SEQUENCE OF TBEthTypeFilterInEntry .1.3.6.1.4.1.2.6.2.15.7.2 |
ibmtbEthTypeFiltInEntryFiltering information for a single Ethernet type on a
single interface. TBEthTypeFilterInEntry .1.3.6.1.4.1.2.6.2.15.7.2.1 |
ibmtbEthTypeFiltInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.7.2.1.1 |
ibmtbEthTypeFiltInValueIndicates which Ethernet type to filter.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.7.2.1.2 |
ibmtbEthTypeFiltInMaskMask to allow ibmtbEthTypeFiltInValue to be used as a range of
values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.7.2.1.3 |
ibmtbEthTypeFiltOutTableTable of Ethernet type filtering information
for outgoing frames. Note that
this filtering only applies to:
1) The Ethernet TYPE field for DIX version 2 frames.
2) The Ethernet TYPE field contained in the SNAP
header of 802.3 frames, if the frame contains a
SNAP header (SSAP = DSAP = 0xAA) SEQUENCE OF TBEthTypeFilterOutEntry .1.3.6.1.4.1.2.6.2.15.7.3 |
ibmtbEthTypeFiltOutEntryFiltering information for a single Ethernet type on a
single interface. TBEthTypeFilterOutEntry .1.3.6.1.4.1.2.6.2.15.7.3.1 |
ibmtbEthTypeFiltOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.7.3.1.1 |
ibmtbEthTypeFiltOutValueIndicates which Ethernet type to filter.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.7.3.1.2 |
ibmtbEthTypeFiltOutMaskMask to allow ibmtbEthTypeFiltOutValue to be used as a
range of values.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.7.3.1.3 |
ibmtbWindowFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.8 |
ibmtbwinFiltInfoTableTable of Window filtering information. SEQUENCE OF TBWindowFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.8.1 |
ibmtbwinFiltInfoEntryWindow filtering information for a single interface. TBWindowFilterInfoEntry .1.3.6.1.4.1.2.6.2.15.8.1.1 |
ibmtbwinFiltIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.8.1.1.1 |
ibmtbwinFiltInFilterTypeFor the incoming filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.15.8.1.1.2 |
ibmtbwinFiltOutFilterTypeFor the outgoing filter table, determines whether
the entries are permit or deny entries.ro Enumeration .1.3.6.1.4.1.2.6.2.15.8.1.1.3 |
ibmtbwinFiltInNotForwardedNumber of packets not forwarded, in the incoming
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.8.1.1.4 |
ibmtbwinFiltOutNotForwardedNumber of packets not forwarded, in the outgoing
direction, because they were filtered out.ro Counter .1.3.6.1.4.1.2.6.2.15.8.1.1.5 |
ibmtbwinFiltInTableTable of Window filtering information
for incoming frames. SEQUENCE OF TBWindowFilterInEntry .1.3.6.1.4.1.2.6.2.15.8.2 |
ibmtbwinFiltInEntryFiltering information for incoming frames. TBWindowFilterInEntry .1.3.6.1.4.1.2.6.2.15.8.2.1 |
ibmtbwinFiltInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.8.2.1.1 |
ibmtbwinFiltInContentsString of bytes that will be compared with bytes in the
frame.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.2.1.2 |
ibmtbwinFiltInMaskStringString of bytes that will be masked with bytes in the
contents field.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.2.1.3 |
ibmtbwinFiltInOffsetStartDetermines the starting point where the contents field should be
applied. A value of 'MAC' means the base is at the beginning of
the destination MAC address field, whereas, a value of 'DATA' means
it is applied at the beginning of the data field.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.15.8.2.1.4 |
ibmtbwinFiltInNumBytesNumber of bytes in the contents field that are used
for filteringro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.2.1.5 |
ibmtbwinFiltInOffsetNumber of bytes offset into the frame from the offset start point
to begin the compare.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.2.1.6 |
ibmtbwinFiltInIdA unique identifier associated with this window filter
entry.ro INTEGER .1.3.6.1.4.1.2.6.2.15.8.2.1.7 |
ibmtbwinFiltOutTableTable of Window filtering information
for outgoing frames. SEQUENCE OF TBWindowFilterOutEntry .1.3.6.1.4.1.2.6.2.15.8.3 |
ibmtbwinFiltOutEntryFiltering information for outgoing frames. TBWindowFilterOutEntry .1.3.6.1.4.1.2.6.2.15.8.3.1 |
ibmtbwinFiltOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.8.3.1.1 |
ibmtbwinFiltOutContentsString of bytes that will be compared with bytes in the
frame.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.3.1.2 |
ibmtbwinFiltOutMaskStringString of bytes that will be masked with bytes in the
contents field.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.3.1.3 |
ibmtbwinFiltOutOffsetStartDetermines the starting point where the contents field should be
applied. A value of 'MAC' means the base is at the beginning of
the destination MAC address field, whereas, a value of 'DATA' means
it is applied at the beginning of the data field.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.15.8.3.1.4 |
ibmtbwinFiltOutNumBytesNumber of bytes in the contents field that are used
for filteringro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.3.1.5 |
ibmtbwinFiltOutOffsetNumber of bytes offset into the frame from the offset start point
to begin the compare.ro OCTET STRING .1.3.6.1.4.1.2.6.2.15.8.3.1.6 |
ibmtbwinFiltOutIdA unique identifier associated with this window filter
entry.ro INTEGER .1.3.6.1.4.1.2.6.2.15.8.3.1.7 |
ibmtbFiltOrderTable OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.15.9 |
ibmtbFiltOrderInTableTable of information describing which order
the filters are applied for incoming frames. SEQUENCE OF TBFiltOrderInEntry .1.3.6.1.4.1.2.6.2.15.9.1 |
ibmtbFiltOrderInEntryFilter order information for incoming frames. TBFiltOrderInEntry .1.3.6.1.4.1.2.6.2.15.9.1.1 |
ibmtbFiltOrderInIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.9.1.1.1 |
ibmtbFiltOrderInPriorityThe priority of when a filter is applied to an incoming
frame. A value of 1 signifies that it is applied first.ro INTEGER .1.3.6.1.4.1.2.6.2.15.9.1.1.2 |
ibmtbFiltOrderInNameThe name of the filter applied to incoming frames
that is associated with the priority, ibmtbFiltOrderInPriority.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.15.9.1.1.3 |
ibmtbFiltOrderOutTableTable of information describing which order
the filters are applied for outgoing frames. SEQUENCE OF TBFiltOrderOutEntry .1.3.6.1.4.1.2.6.2.15.9.2 |
ibmtbFiltOrderOutEntryFilter order information for outgoing frames. TBFiltOrderOutEntry .1.3.6.1.4.1.2.6.2.15.9.2.1 |
ibmtbFiltOrderOutIfIndexThe value of this object identifies the interface for which
this entry contains management information. The value of
this object for a particular interface has the same value
as the ifIndex object for the same interface.ro INTEGER .1.3.6.1.4.1.2.6.2.15.9.2.1.1 |
ibmtbFiltOrderOutPriorityThe priority of when a filter is applied to an outgoing
frame. A value of 1 signifies that it is applied first.ro INTEGER .1.3.6.1.4.1.2.6.2.15.9.2.1.2 |
ibmtbFiltOrderOutNameThe name of the filter applied to outgoing frames
that is associated with the priority, ibmtbFiltOrderOutPriority.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.15.9.2.1.3 |
ibmapple OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.16 |
ibmSelectNet OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.16.1 |
ibmSelectNetTableThe list of selected network definition entries. SEQUENCE OF SelectNetEntry .1.3.6.1.4.1.2.6.2.16.1.1 |
ibmSelectNetEntryThe description of a selected network definition. SelectNetEntry .1.3.6.1.4.1.2.6.2.16.1.1.1 |
ibmSelectNetIndexAn identifier that is unique to the default zone name
that is present in this entry.ro INTEGER .1.3.6.1.4.1.2.6.2.16.1.1.1.1 |
ibmSelectNetZoneThe ASCII default zone name of this entry.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.1.1.1.2 |
ibmSelectNetNetStartThe network address that starts the range for this entry.
This address is a two octet DDP network address in network
byte order.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.1.1.1.3 |
ibmSelectNetNetEndThe network address that ends the range for this entry.
This address is a two octet DDP network address in network
byte order.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.1.1.1.4 |
ibmSelectNetInterfaceNetStartThe network address that starts the range for the interface
associated with this definition.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.1.1.1.5 |
ibmnbpFilter OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.16.2 |
ibmnbpFilterPacketsFilteredThe number of packets filtered by nbp filters.ro Counter .1.3.6.1.4.1.2.6.2.16.2.1 |
ibmnbpFilterPacketsSentThe number of packets not filtered by nbp filters.ro Counter .1.3.6.1.4.1.2.6.2.16.2.2 |
ibmatportFilter OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.16.3 |
ibmatportFilterTableThe list of Appletalk port destination network filter entries. SEQUENCE OF AtportFilterEntry .1.3.6.1.4.1.2.6.2.16.3.1 |
ibmatportFilterEntryThe description of a filter on this Appletalk port. AtportFilterEntry .1.3.6.1.4.1.2.6.2.16.3.1.1 |
ibmatportFilterIndexAn identifier that is unique to the Appletalk
port to which this filter applies. The port identified
by this value is the same port as identified by
atportIndex.ro INTEGER .1.3.6.1.4.1.2.6.2.16.3.1.1.1 |
ibmatportFilterNetStartThe network address that starts the range for this
destination network filter.
This address is a two octet DDP network address in network
byte order.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.3.1.1.2 |
ibmatportFilterNetEndThe network address that ends the range for this
destination network filter.
This address is a two octet DDP network address in network
byte order.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.3.1.1.3 |
ibmSelectNetFilter OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.16.4 |
ibmSelectNetFilterTableThe list of selected network destination network filter entries. SEQUENCE OF SelectNetFilterEntry .1.3.6.1.4.1.2.6.2.16.4.1 |
ibmSelectNetFilterEntryThe description of a filter for this selected network definition. SelectNetFilterEntry .1.3.6.1.4.1.2.6.2.16.4.1.1 |
ibmSelectNetFilterIndexAn identifier that is unique to the selected network
definition to which this filter applies. This value
is the same as that provided by ibmSelectNetIndex.ro INTEGER .1.3.6.1.4.1.2.6.2.16.4.1.1.1 |
ibmSelectNetFilterNetStartThe network address that starts the range for this
destination network filter.
This address is a two octet DDP network address in network
byte order.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.4.1.1.2 |
ibmSelectNetFilterNetEndThe network address that ends the range for this
destination network filter.
This address is a two octet DDP network address in network
byte order.ro OCTET STRING .1.3.6.1.4.1.2.6.2.16.4.1.1.3 |
ibmdec OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.17 |
ibmdecAllRoutersFuncAddrThe functional address used in communicating with
with all DECnet Phase IV and DECnet Phase IV-Prime
routers on a token ring LAN.ro OCTET STRING .1.3.6.1.4.1.2.6.2.17.1 |
ibmdecAllEndNodesFuncAddrThe functional address used in communicating with
with all DECnet Phase IV and DECnet Phase IV-Prime
end nodes on a token ring LAN.ro OCTET STRING .1.3.6.1.4.1.2.6.2.17.2 |
ibmdecSplitHorPoisonRevDefines whether the Split Horizon with Poison
Reverse option is enabled or notro Enumeration .1.3.6.1.4.1.2.6.2.17.3 |
ibmdecNodeTypeThis parameter indicates the node type of the
router. This object is the same as the phivRouteType
object defined by RFC 1289, however, this definition
extends the enumerations to provide new values.ro Enumeration .1.3.6.1.4.1.2.6.2.17.4 |
ibmdecLANCircuitTableThe list of information relevant to LAN circuits.
This table extends the information provided by the
phivCircuitParametersTable defined by RFC 1289. SEQUENCE OF IbmdecLANCircuitEntry .1.3.6.1.4.1.2.6.2.17.5 |
ibmdecLANCircuitEntryTable entry with information relevant to LAN circuits. IbmdecLANCircuitEntry .1.3.6.1.4.1.2.6.2.17.5.1 |
ibmdecLANCircuitIndexA unique index value for each known circuit
on a LAN interface. The value of this variable
is the same as that provided by phivCircuitIndex.ro INTEGER .1.3.6.1.4.1.2.6.2.17.5.1.1 |
ibmdecLANCircuitTypeIf the CircuitType is Bilingual for a circuit, the router
would use a Phase_IV compliant locally administered MAC address
for that circuit and would be configured to communicate
with Phase_IV and Phase_IV-Prime nodes over that circuit.
A bilingual router can help communication between the
Phase_IV and the Phase_IV-Prime nodes over the same
extended LAN segment, and prevents a partitioned network.
If the CircuitType is AMA ( Arbitrary MAC Address ) for a
circuit, the router would use an arbitrary MAC address
for that circuit, and would be configured to communicate
with Phase_IV-Prime nodes over that circuit.
If the CircuitType is PhaseIV for a circuit, the router
would use the Phase_IV compliant locally administered MAC
address for that circuit, and would be configured to
communicate with Phase_IV nodes over that circuit.ro Enumeration .1.3.6.1.4.1.2.6.2.17.5.1.2 |
ibmdecLANCircuitSourceRouteThis parameter indicates if source routing is enabled
on a token-ring circuit.
A value of 3 is returned for circuits which are not
of the 802.5/token-ring type.ro Enumeration .1.3.6.1.4.1.2.6.2.17.5.1.3 |
ibmdecLANCircuitAddrTypeThis parameter indicates the type of MAC address
used on this circuit.
The value returned is decnet(1), if a DECnet
Phase_IV compliant locally administered MAC address
is being used.
The value returned is hardware(2), if the unique
assigned ROM address is used.
The value returned is user(3), if a non
DECnet Phase_IV compliant locally administered
MAC address is being used.ro Enumeration .1.3.6.1.4.1.2.6.2.17.5.1.4 |
ibmvines OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18 |
ibmvSysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.1 |
ibmvSysRtrIndicates whether this node is acting as a VINES router.ro Enumeration .1.3.6.1.4.1.2.6.2.18.1.1 |
ibmvRouterNameThe name of the router node, up to 15 characters long.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.18.1.2 |
ibmvRouterNetidThe VINES network ID of the router node equal to the router
node's serial number. This id may be up to 4 bytes in length.ro INTEGER .1.3.6.1.4.1.2.6.2.18.1.3 |
ibmvIP OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.2 |
ibmvipTotalInThe total number of VINES IP packets that the router node has
received since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.2.1 |
ibmvipTotalOutThe total number of VINES IP packets that the router node has
sent since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.2.2 |
ibmvipRoutedThe total number of packets that were routed to another
node since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.2.3 |
ibmvipBcastThe number of VINES IP broadcast packets sent, both generated
from the router node and routed from other nodes, since the last
reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.2.4 |
ibmvipInReceivesThe number of unicast VINES IP packets received since the last
reboot. A unicast packet is destined for this particular
router node. It is not being forwarded, multicasted or
broadcasted.ro Counter .1.3.6.1.4.1.2.6.2.18.2.5 |
ibmvipBcastInReceivesThe number of VINES IP broadcast packets received since the
last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.2.6 |
ibmvipBadThe total number of badly formed packets that the router
node has received since the last booted.ro Counter .1.3.6.1.4.1.2.6.2.18.2.7 |
ibmvipBadHeadersThe number of incoming VINES IP packets received since the last
reboot which contained a header error; excluding the following
errors: length, checksum and time to live.ro Counter .1.3.6.1.4.1.2.6.2.18.2.8 |
ibmvipTooSmallsThe number of VINES IP packets received since the last reboot
with len < the size of a VINES IP header.ro Counter .1.3.6.1.4.1.2.6.2.18.2.9 |
ibmvipBadLensThe number of VINES IP packets received since the last reboot
whose packet size is not equal to the number of bytes specified
in the VINES IP header field.ro Counter .1.3.6.1.4.1.2.6.2.18.2.10 |
ibmvipBadSumsThe number of VINES IP packets received since the last reboot
with a bad checksum.ro Counter .1.3.6.1.4.1.2.6.2.18.2.11 |
ibmvipInDiscardsThe number of incoming VINES IP packets discarded since the last
reboot due to lack of resources.ro Counter .1.3.6.1.4.1.2.6.2.18.2.12 |
ibmvipZeroHopsThe number of VINES IP packets discarded since the last reboot
because the hop count equals zero and the current node is not
the destination.ro Counter .1.3.6.1.4.1.2.6.2.18.2.13 |
ibmvipOutNoRoutesThe number of outgoing VINES IP packets discarded since the
last reboot because no route is available.ro Counter .1.3.6.1.4.1.2.6.2.18.2.14 |
ibmvNeighbor OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.3 |
ibmvARP OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.3.1 |
ibmvarpQueryReqsThe number of query requests received from clients since the
last reboot. When a client is first booted up, it sends out a
broadcast query request packet on its LAN segment.ro Counter .1.3.6.1.4.1.2.6.2.18.3.1.1 |
ibmvarpServiceRespsThe number of ARP query responses sent out from this router node
since the last reboot. Each router node on the same LAN
segment that is providing address assignments will respond.ro Counter .1.3.6.1.4.1.2.6.2.18.3.1.2 |
ibmvarpAssignReqsThe number of ARP assignment request received from clients
since the last reboot. The client issues an assignment request
packet to the router node that responded first to the query
request.ro Counter .1.3.6.1.4.1.2.6.2.18.3.1.3 |
ibmvarpAssignRespsThe number of ARP assignment responses sent to clients since
the last reboot. The router node issues a VINES internet
address for the client and sends it back in an assignment
response packet.ro Counter .1.3.6.1.4.1.2.6.2.18.3.1.4 |
ibmvarpHeaderErrorThe number of ARP packets received since the last reboot
with a header error.ro Counter .1.3.6.1.4.1.2.6.2.18.3.1.5 |
ibmvNbrNumberThe number of entries in the neighbor table.ro INTEGER .1.3.6.1.4.1.2.6.2.18.3.2 |
ibmvNbrTableA list of information about IBM's VINES router neighbor table. SEQUENCE OF IbmvNbrEntry .1.3.6.1.4.1.2.6.2.18.3.3 |
ibmvNbrEntryThe information for each entry in the neighbor table. IbmvNbrEntry .1.3.6.1.4.1.2.6.2.18.3.3.1 |
ibmvNbrNetidThe network ID of the neighbor. The VINES internet address
has the following form: 'nnnnnnnn.ssss'hex, where n = network
ID and s = subnetwork ID. If the neighbor is a router, then
network ID is the router node's (the neighbor's) serial number.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.3.3.1.1 |
ibmvNbrSubNetidThe subnetwork ID of the neighbor. The VINES internet address
has the following form: 'nnnnnnnn.ssss'hex, where n = network ID
and s = subnetwork ID. If the neighbor is a router node,
then the subnetwork ID for the router node (the neighbor) is 1.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.3.3.1.2 |
ibmvNbrTypeThe type of the neighbor (workstation = pc).ro Enumeration .1.3.6.1.4.1.2.6.2.18.3.3.1.3 |
ibmvNbrIfTypeThe type of interface that the server uses to reach the
neighbor.ro Enumeration .1.3.6.1.4.1.2.6.2.18.3.3.1.4 |
ibmvNbrRemAddressThe address of the neighbor's physical interface. For LAN's,
it is the hardware address of the neighbor.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.3.3.1.5 |
ibmvNbrLocAddressThe address of the router node's physical interface,
such as a LAN address.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.3.3.1.6 |
ibmvNbrLocSlotThe slot number of the interface card that the router node
uses to reach the neighbor.ro INTEGER .1.3.6.1.4.1.2.6.2.18.3.3.1.7 |
ibmvNbrLocPortThe port number on the interface card that the router node
used to reach the neighbor.ro INTEGER .1.3.6.1.4.1.2.6.2.18.3.3.1.8 |
ibmvNbrAgingThe amount of time left before a neighbor entry
will be removed because of aging. For a WAN link, which is
defined to be permanent, this object is not applicable.ro INTEGER .1.3.6.1.4.1.2.6.2.18.3.3.1.9 |
ibmvNbrFlagsOnly applicable to a WAN link; states if the link is
permanent or non-permanent.ro Enumeration .1.3.6.1.4.1.2.6.2.18.3.3.1.10 |
ibmvNbrRIFLAN - MAC address and if applicable, source routing
information.
Frame Relay - n/a
PPP - n/aro OCTET STRING .1.3.6.1.4.1.2.6.2.18.3.3.1.11 |
ibmvNbrIfIndexThe interface (using the MIB II standard) used to reach the
neighbor. This number corresponds to the IfIndex object found
in MIB II.ro INTEGER .1.3.6.1.4.1.2.6.2.18.3.3.1.12 |
ibmvNbrMetricThe cost to reach the neighbor.ro INTEGER .1.3.6.1.4.1.2.6.2.18.3.3.1.13 |
ibmvRouting OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.4 |
ibmvRtConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.4.1 |
ibmvRtCfgMaxThe maximum number of entries allowed in the routing table.
This value is not defined by administrator.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.1.1 |
ibmvRtCfgInFltEnables or disables all inbound RTP filters defined. If no
inbound RTP filters are defined, then this object has no effect.
If a filter is defined, then the default value is 'enabled'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.4.1.2 |
ibmvRtCfgInFltNumThe number of inbound RTP filters currently defined.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.1.3 |
ibmvRtCfgInFltTableA list of information about the inbound RTP filters which
are specified for this router node. SEQUENCE OF IbmvRtCfgInFltEntry .1.3.6.1.4.1.2.6.2.18.4.1.4 |
ibmvRtCfgInFltEntryThe information for each entry in the inbound RTP filter table. IbmvRtCfgInFltEntry .1.3.6.1.4.1.2.6.2.18.4.1.4.1 |
ibmvRtCfgInFltNetIDAdministrator defined object which specifies the VINES network
number to be filtered on the port. The range of the network
number is 00000000 - FFFFFFFE. If the network number,
0xFFFFFFFF, is defined, then all network numbers will be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.4.1.4.1.1 |
ibmvRtCfgInFltIfIndexThe interface (using the MIB II standard) for which the
inbound RTP filters were defined. This number corresponds to
the IfIndex object found in MIB II.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.1.4.1.2 |
ibmvRtCfgInFltModeThe filtering action for the inbound RTP filter. The inbound RTP
filters operate on network numbers contained in the topological
entries in the RTP update, response, and redirect packets received
over a specified interface. In deny mode, the 6611 ignores route
information for a network if the network number and the
port on which the route information was received matches any
inbound RTP filter. In permit mode, the IBM 6611 processes route
information for a network only if the network number and the port
on which the route information was received matches any inbound
RTP filter. The default for this object is 'deny'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.4.1.4.1.3 |
ibmvRtCfgInFltUsesThe number of times the defined filter was used.ro Counter .1.3.6.1.4.1.2.6.2.18.4.1.4.1.4 |
ibmvRtCfgOutFltEnables or disables all outbound RTP filters defined. If no
outbound RTP filters are defined, then this object has no effect.
If a filter is defined, then the default value is 'enabled'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.4.1.5 |
ibmvRtCfgOutFltNumThe number of outbound RTP filters currently defined.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.1.6 |
ibmvRtCfgOutFltTableA list of information about the outbound RTP filters which
are specified for this router node. SEQUENCE OF IbmvRtCfgOutFltEntry .1.3.6.1.4.1.2.6.2.18.4.1.7 |
ibmvRtCfgOutFltEntryThe information for each entry in the outbound RTP filter table. IbmvRtCfgOutFltEntry .1.3.6.1.4.1.2.6.2.18.4.1.7.1 |
ibmvRtCfgOutFltNetIDAdministrator defined object which specifies the VINES network
number to be filtered on the port. The range of the network
number is 00000000 - FFFFFFFE. If the network number,
0xFFFFFFFF, is defined, then all network numbers will be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.4.1.7.1.1 |
ibmvRtCfgOutFltIfIndexThe interface (using the MIB II standard) for which the
outbound RTP filters were defined. This number corresponds to
the IfIndex object found in MIB II.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.1.7.1.2 |
ibmvRtCfgOutFltModeThe filtering action for the outbound RTP filter. The outbound
RTP filters operate on the network numbers contained in the
topological entries in RTP update and response packets
transmitted over a specified interface. In deny mode,
filters operate on interface names and network numbers (that is,
the network numbers contained in the topological entries in the
RTP packets). In deny mode, the IBM 6611 does not advertise
route information for a network if the network number and the
interface on which the route information is to be transmitted
matches any outbound RTP filter. In permit mode, the 6611
advertises route information for a network only if the network
number and the interface on which the route information is to be
transmitted matches any outbound RTP filter. The default for this
object is 'Deny'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.4.1.7.1.3 |
ibmvRtCfgOutFltUsesThe number of times the defined filter was used.ro Counter .1.3.6.1.4.1.2.6.2.18.4.1.7.1.4 |
ibmvRtCfgFltEnables or disables all RTP router filters defined. If no
RTP router filters are defined, then this object has no effect.
If a filter is defined, then the default value is 'enabled'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.4.1.8 |
ibmvRtCfgFltNumThe number of RTP router filters currently defined.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.1.9 |
ibmvRtCfgFltTableA list of information about the RTP router filters which
are specified for this router node. SEQUENCE OF IbmvRtCfgFltEntry .1.3.6.1.4.1.2.6.2.18.4.1.10 |
ibmvRtCfgFltEntryThe information for each entry in the RTP router filter table. IbmvRtCfgFltEntry .1.3.6.1.4.1.2.6.2.18.4.1.10.1 |
ibmvRtCfgFltNetIDAdministrator defined object which specifies the VINES network
number to be filtered on the port. The range of the network
number is 00000000 - FFFFFFFE. If the network number,
0xFFFFFFFF, is defined, then all network numbers will be filtered.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.4.1.10.1.1 |
ibmvRtCfgFltModeThe filtering action for the RTP router filter. The RTP router
filters operate on the network number contained in the source
network number field in the IP header of any RTP packet (update,
request, response, and redirect). (The subnetwork ID is assumed
to be 0x0001.) In deny mode, the IBM 6611 ignores route
information from a service node if the sending router's network
number matches any RTP router filter. In permit mode, the IBM 6611
processes route information from a router only if the sending
router's network number matches any RTP router filter. The default
for this object is 'deny'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.4.1.10.1.2 |
ibmvRtCfgFltUsesThe number of times the defined filter was used.ro Counter .1.3.6.1.4.1.2.6.2.18.4.1.10.1.3 |
ibmvRTP OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.4.2 |
ibmvrtpUpdSentsThe number of routing update packets sent since the last reboot.
The routing update packets are periodically broadcast by nodes
to notify neighboring nodes of their existence. Router nodes
include network topology information in these updates.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.1 |
ibmvrtpUpdRecsThe number of routing update packets received since the last
reboot. The routing update packets are sent from neighboring node
making known their existence. Packets received from router
nodes include network topology information.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.2 |
ibmvrtpReqSentsThe number of routing request packets sent since the last reboot.
Routing request packets are sent by a node when it requires an
immediate update.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.3 |
ibmvrtpReqRecsThe number of routing request packets received since the last
reboot. The 6611 receives routing request packets when another
node requires an immediate update. The 6611 will send the update
in a routing response packet.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.4 |
ibmvrtpResSentsThe number of routing response packets sent since the last reboot.
Routing response packets are sent in response to a routing request
packet.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.5 |
ibmvrtpResRecsThe number of routing response packets received since the last
reboot. When a node sends out a routing request packet, it
receives a routing response packet which contains all the routing
information requested.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.6 |
ibmvrtpRedSentsThe number of routing redirect packets sent since the last reboot.
The routing redirect packets are sent by a node to notify another
node of a more direct path to a destination node.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.7 |
ibmvrtpRedRecsThe number of routing redirect packets received since the last
reboot. A 6611 receives a routing redirect packet when another
node knows a more direct path to the destination node.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.8 |
ibmvrtpHeaderErrorThe number of RTP packets received since the last reboot
with a RTP header error.ro Counter .1.3.6.1.4.1.2.6.2.18.4.2.9 |
ibmvRtNumberThe number of entires in the route table.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.3 |
ibmvRtTableA list of information about IBM's VINES router table. SEQUENCE OF IbmvRtEntry .1.3.6.1.4.1.2.6.2.18.4.4 |
ibmvRtEntryThe information for each entry in the router table. IbmvRtEntry .1.3.6.1.4.1.2.6.2.18.4.4.1 |
ibmvRtNetidThe network ID of the router node's destination router node.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.4.4.1.1 |
ibmvRtMetricThe routing metric used by the called router node to reach the
destination. A routing metric is an estimated round-trip
delay time associated with the router that maximum sized
VINES IP packets will take to reach the destination.
The metric reflects the cost of the path to the destination,
it is in 200-millisecond units.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.4.1.2 |
ibmvRtIdleThe time to live timer for this router node's entry. This
value indicates the amount of time before the entry is removed
from the called router node's routing table. The value is
returned in 90 second units.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.4.1.3 |
ibmvRtGateNetidThe network ID of the router node that acts as the router for
reaching the destination router node.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.4.4.1.4 |
ibmvRtIfIndexThe interface (using the MIB II standard) which identifies the
local interface through which the next hop of this route should
be reached. This number corresponds to the IfIndex object found
in MIB II.ro INTEGER .1.3.6.1.4.1.2.6.2.18.4.4.1.5 |
ibmvRtStateThe state the routing entry; permanent or not permanent.ro Enumeration .1.3.6.1.4.1.2.6.2.18.4.4.1.6 |
ibmvICP OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.5 |
ibmvicpExcGensNumber of exception notifications generated from this router
node since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.5.1 |
ibmvicpMetricGensThe number of metric notifications generated from this router
node since the last reboot. The ICP packet contains metric
information about the final transmission medium used to reach
a client node.ro Counter .1.3.6.1.4.1.2.6.2.18.5.2 |
ibmvicpHeaderErrorThe number of ICP packets received since the last reboot
with an ICP header error.ro Counter .1.3.6.1.4.1.2.6.2.18.5.3 |
ibmvFRP OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.6 |
ibmvFRPreassemblesThe number of times packets were reassembled since the
last reboot. One VINES IP packet being broken into
three message fragments is counted as one fragmentation.
The three fragments being reassembled into one VINES
IP packet counts as one reassembly.ro Counter .1.3.6.1.4.1.2.6.2.18.6.1 |
ibmvFRPfragsReassembledThe number of fragments that were reassembled since the last
reboot. If three fragments are to be reassembled into one
packet, then this object value will add three to its total.ro Counter .1.3.6.1.4.1.2.6.2.18.6.2 |
ibmvFRPreasFailsThe number of times the reassembly of fragments fails since the
last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.6.3 |
ibmvFRPfragmentedThe number of packet fragmentations performed since the last
reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.6.4 |
ibmvFRPfrgCreatedThe number of fragments created since the last reboot when
fragmenting VINES IP packets. If a VINES IP packet is fragmented
into three fragments, then this object value will add three to
its total.ro Counter .1.3.6.1.4.1.2.6.2.18.6.5 |
ibmvFRPfrgFailsThe number of times the fragmentation of a VINES IP packets
fails since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.6.6 |
ibmvInterface OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.18.7 |
ibmvPortCfgTableThe list of information about port configuration at
each interface. SEQUENCE OF IbmvPortCfgEntry .1.3.6.1.4.1.2.6.2.18.7.1 |
ibmvPortCfgEntryThe information for each entry in the port configuration
table. IbmvPortCfgEntry .1.3.6.1.4.1.2.6.2.18.7.1.1 |
ibmvPortCfgIfIndexThe interface (using the MIB II standard) which uniquely
identifies each interface and allows multiple tables to be
associated with a given interface. This number corresponds to
the IfIndex object found in MIB II.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.1.1.1 |
ibmvPortCfgARPAdministrator defined value which specifies whether the router
node will assign VINES addresses to clients that reside on the LAN
attached to this port. The default value for this object is
'disable'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.1.1.2 |
ibmvPortCfgServAdministrator defined value specifying whether the serverless
option is enables or disabled. When the serverless option is
enabled; the router looks for particular broadcasts that clients
use in finding the services on the VINES server. This allows
client nodes on a serverless LAN to communicate with a VINES
server more than one hop away. The default value for this object
is 'disable'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.1.1.3 |
ibmvPortCfgHCtoServAdministrator defined value which specifies the number of hops
from the client to the router node.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.1.1.4 |
ibmvPortCfgPerUpdateAdministrator defined value which specifies whether periodic
updates will be sent over a WAN link.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.1.1.5 |
ibmvPortCfgMetricAdministrator defined value for port metric. This value
overrides the metric which is used by the IBM 6611 to make
routing decisions. If no response is provided to this parameter,
the IBM 6611 will use defaults contained within the MPNP program.
These defaults are based on values assigned by Banyan Systems for
its VINES servers.
The port metric is a rough estimate of the round trip delay for a
maximum sized VINES IP packet to travel to any neighbor on this
port. The unit for the metric value is 200 milliseconds. The
default metric for an Ethernet port is 2. The default metric for a
Token-Ring is determined by the response to the Token-Ring
Data Rate parameter. The default metric for a serial port is
determined by the response to the Serial-Line Speed parameter.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.1.1.6 |
ibmvPortCfgTRAdministrator defined value which determines the encapsulation
method used for receiving and transmitting VINES packets on
this port. IEEE 802.5 LLC uses 802.2 encapsulation followed by
an LLC field using SAP value 0xBC You cannot use IEEE 802.5
LLC encapsulation on the same port that performs data link
switching, if the 0xBC SAP has been configured for frame
forwarding by the data link switching function. IEEE 802.5 SNAP
uses 802.2 encapsulation followed by a SNAP header using the
organizationally unique ID 0x08 00 4A, the protocol id 0x80C4
for VINES IP and the protocol id 0x80C5 for VINES Link Level Echo.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.1.1.7 |
ibmvPortCfgENAdministrator defined value which determines the encapsulation
method used for receiving and transmitting VINES packets on
this port. Ethernet II uses DIX encapsulation with a packet
type 0x0BAD for VINES IP and 0x0BAF for VINES Link Level Echo.
IEEE 802.3 SNAP uses 802.2 encapsulation followed by a SNAP
header using the organizationally unique ID 0x08 00 4A, the
protocol id 0x80C4 for VINES IP and the protocol id 0x80C5 for
VINES Link Level Echo.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.1.1.8 |
ibmvPortCfgInFltAdministrator defined value which allows inbound port filters
to be defined. The default value is 'disabled'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.1.1.9 |
ibmvPortCfgInFltNumThe number of inbound port filters defined for this port.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.1.1.10 |
ibmvPortCfgOutFltAdministrator defined value which allows outbound port filters
to be defined. The default value is 'disabled'.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.1.1.11 |
ibmvPortCfgOutFltNumThe number of outbound port filters defined for this port.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.1.1.12 |
ibmvFltTableThe list of information about port filter configurations at
each interface . SEQUENCE OF IbmvFltEntry .1.3.6.1.4.1.2.6.2.18.7.2 |
ibmvFltEntryThe information for each entry in the port filter configuration
table. IbmvFltEntry .1.3.6.1.4.1.2.6.2.18.7.2.1 |
ibmvFltIfIndexThe value of this object identifies the interface for which
this entry contains management information. The IfIndex allows
a subset of the filter table to be associated with a particular
interface.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.2.1.1 |
ibmvFltNoA unique integer identifying this filter entry for this
interface.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.2.1.2 |
ibmvFltModeIdentifies if the port filter is an inbound or outbound filter.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.2.1.3 |
ibmvFltValueAn octet string representing the concatenation of
VINES IP header fields and VINES transport header fields
required by this filter entry. Incoming packets will
be bitwise ANDed with the value of ibmvFltMask, and
if the result is equal to the value of this object, the
packet will be filtered according to the value of
ibmvFltValue.
Fields from VINES IP and transport headers used for filtering:
field length field name
8 BITS protocol type
4 BITS hop count
32 BITS destination network number
16 BITS destination subnetwork number
16 BITS destination port number
32 BITS source network number
16 BITS source subnetwork number
16 BITS source port numberro OCTET STRING .1.3.6.1.4.1.2.6.2.18.7.2.1.4 |
ibmvFltMaskAn octet string indicating the parts of the VIP header and
transport header relevant to this filter entry. This mask will
be bitwise ANDed with the appropriate header fields; if the result
is equal to the value of ibmvnFilterValue, the packet will be
filtered according to the value of ibmvnFilterType.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.7.2.1.5 |
ibmvFltTypeAdministrator defined value which determines the filtering mode
for all filters defined on this port. If the port is using
Deny mode, then all packets matching a defined port filter
will be discarded. If the port is using Permit mode, then only
the packets matching a defined port filter will be forwarded.
The default value is Deny.ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.2.1.6 |
ibmvFltHCCompareAdministrator defined value which indicates the relational
association desired if filtering is being done based on hop
count. If filtering is not being done based on hop count (that
is, if the hop count portion of IBM VINES Port Mask is 0) the
value of this object will be none(1).ro Enumeration .1.3.6.1.4.1.2.6.2.18.7.2.1.7 |
ibmvFltUsesThis object counts how many times the defined filter was
used.ro Counter .1.3.6.1.4.1.2.6.2.18.7.2.1.8 |
ibmvifNumberThe number of VINES interfaces configured on the router node.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.3 |
ibmvifTableList of interfaces with some statistics about each interface. SEQUENCE OF IbmvifEntry .1.3.6.1.4.1.2.6.2.18.7.4 |
ibmvifEntryInformation about one interface. IbmvifEntry .1.3.6.1.4.1.2.6.2.18.7.4.1 |
ibmvifSlotThe slot number of the interface's communications card.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.4.1.1 |
ibmvifPortThe port number of the interface.ro INTEGER .1.3.6.1.4.1.2.6.2.18.7.4.1.2 |
ibmvifDescrA textual description of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.2.18.7.4.1.3 |
ibmvifAddressThe physical address of the interface, applies to LAN
interfaces only.ro OCTET STRING .1.3.6.1.4.1.2.6.2.18.7.4.1.4 |
ibmvifInPktsThe total number of VINES IP packets that the router node
received since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.7.4.1.5 |
ibmvifInErrsThe total number of received VINES IP packets that contained
errors since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.7.4.1.6 |
ibmvifOutPktsThe total number of VINES IP packets that the router node
sent since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.7.4.1.7 |
ibmvifOutErrsThe total number of transmitted VINES IP packets that
contained errors since the last reboot.ro Counter .1.3.6.1.4.1.2.6.2.18.7.4.1.8 |
ibminterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.19 |
ibmipext OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.19.1 |
ibmipPtyQueueEnableTableThis table defines which interfaces are
enabled for IP prioritization.
It also defines the default serial
transmission priority queue to be used
for IP packets which are not assigned to use
a specific transmission queue. SEQUENCE OF IbmipPtyQueueEnableEntry .1.3.6.1.4.1.2.6.2.19.1.1 |
ibmipPtyQueueEnableEntryEach entry defines whether IP prioritization is
enabled on a particular interface and the default
transmission queue. IbmipPtyQueueEnableEntry .1.3.6.1.4.1.2.6.2.19.1.1.1 |
ibmipPtyQueueEnableIfIndexDefines the interface associated with IP
prioritization. This interface is the same
interface as defined by the ifIndex variable
of the MIB-II interfaces group.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.1.1.1 |
ibmipPtyQueueEnableThe value of this object identifies if IP prioritization
is enabled on this interface.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.1.1.2 |
ibmipPtyQueueDefaultIdentifies the transmission queue to be used
for IP packets which are not assigned to use
a specific transmission queue.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.1.1.3 |
ibmipPtyQueueTableThis table contains the assignments of UDP/TCP
port numbers to specific transmission queues
for a given serial interface. SEQUENCE OF IbmipPtyQueueEntry .1.3.6.1.4.1.2.6.2.19.1.2 |
ibmipPtyQueueEntryEach entry defines the UDP/TCP port number and
its associated transmission priority queue for
a given interface. IbmipPtyQueueEntry .1.3.6.1.4.1.2.6.2.19.1.2.1 |
ibmipPtyQueueIfIndexDefines the interface on which a UDP/TCP port
is associated with a specific transmission
priority queue. This interface is the same
interface as defined by the ifIndex variable
of the MIB-II interfaces group.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.2.1.1 |
ibmipPtyQueuePortIdentifies a UDP or TCP port number.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.2.1.2 |
ibmipPtyQueueTypeIndicates the port type of the port number
defined by ibmipPtyQueuePort.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.2.1.3 |
ibmipPtyQueueNumberIndicates which transmission queue will be used to
transmit a packet which has a port number as specified
by ibmipPtyQueuePort.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.2.1.4 |
ibmipFilterTableTable of IP address/mask filter definitions. SEQUENCE OF IbmipFilterEntry .1.3.6.1.4.1.2.6.2.19.1.3 |
ibmipFilterEntryAn entry in the IP address/mask filter table. IbmipFilterEntry .1.3.6.1.4.1.2.6.2.19.1.3.1 |
ibmipFilterIfIndexDefines the interface associated with this
address/mask filter definition. This interface is
the same interface as defined by the ifIndex
variable of the MIB-II interfaces group.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.3.1.1 |
ibmipFilterIdAn id that defines this filter entry.
This number is unique within this interface.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.3.1.2 |
ibmipFilterScopeDefines whether this filter is applied to
all interfaces or just this one.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.3.1.3 |
ibmipFilterTypeDefines the type of filtering.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.3.1.4 |
ibmipPermitDenyIdentifies whether traffic for a specified filter ID
is to be permitted to pass through the IBM 6611 or
whether it is to be discarded.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.3.1.5 |
ibmipFilterAddr1A valid IP address of the host, subnet or network
for this filter. For singular filters, this is the only
end point, however, for dual filters this is the source
end point.ro IpAddress .1.3.6.1.4.1.2.6.2.19.1.3.1.6 |
ibmipFilterMask1A valid IP address mask used for this filter.
In conjunction with the IP address defined by
ibmipFilterAddr1, it defines the range of IP
addresses to be filtered.ro IpAddress .1.3.6.1.4.1.2.6.2.19.1.3.1.7 |
ibmipFilterAddr2Defines the destination IP address if ibmipFilterType is
dual. This value is undefined for singular filters.ro IpAddress .1.3.6.1.4.1.2.6.2.19.1.3.1.8 |
ibmipFilterMask2A valid IP address mask used for this filter.
In conjunction with the IP address defined by
ibmipFilterAddr2, it defines the range of IP
addresses to be filtered.ro IpAddress .1.3.6.1.4.1.2.6.2.19.1.3.1.9 |
ibmipFilterExtTableTable of IP port number filter definitions. SEQUENCE OF IbmipFilterExtEntry .1.3.6.1.4.1.2.6.2.19.1.4 |
ibmipFilterExtEntryAn entry in the IP port number filter table. IbmipFilterExtEntry .1.3.6.1.4.1.2.6.2.19.1.4.1 |
ibmipFilterExtIfIndexDefines the interface associated with this
IP port number filter definition. This interface is
the same interface as defined by the ifIndex
variable of the MIB-II interfaces group.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.4.1.1 |
ibmipFilterExtFilterIdAn id that defines this filter entry.
This number is unique within this interface
and is the same filter ID as defined by
ibmipFilterId.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.4.1.2 |
ibmipFilterExtValueDefines a TCP or UDP port number that will be filtered
using this filter specification.ro INTEGER .1.3.6.1.4.1.2.6.2.19.1.4.1.3 |
ibmipFilterExtProtocolSpecifies the protocol associated with the value
defined by ibmipFilterExtValue for this filter
specification.ro Enumeration .1.3.6.1.4.1.2.6.2.19.1.4.1.4 |
ibmptyqueue OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.19.2 |
ibmPtyQueueingTableThis table provides information on a specific
transmission queue of a serial interface.
Information includes:
- Link Bandwidth Allocation (LBA):
Identifies the number of packets transmitted
from a particular queue before a lower priority
transmission queue will be serviced.
- Queue Bandwidth Reservation (QBR):
Identifies the percentage of buffer space on
a serial adapter that is allotted to a
particular queue for transmission of packets. SEQUENCE OF IbmPtyQueueingEntry .1.3.6.1.4.1.2.6.2.19.2.1 |
ibmPtyQueueingEntryEach entry defines the Link Bandwidth Allocation (LBA)
and Queue Bandwidth Reservation (QBR) definitions for
a specific transmission queue on a serial interface.
Additionally, a counter is provided indicating
the number of packets discarded on this queue due to
a queue overflow. IbmPtyQueueingEntry .1.3.6.1.4.1.2.6.2.19.2.1.1 |
ibmPtyQueueingIfIndexDefines the interface associated with this
priority queue information. This interface is
the same interface as defined by the ifIndex
variable of the MIB-II interfaces group.ro INTEGER .1.3.6.1.4.1.2.6.2.19.2.1.1.1 |
ibmPtyQueueingQnumIdentifies the priority queue associated
with this interface and its priority queue
information.ro Enumeration .1.3.6.1.4.1.2.6.2.19.2.1.1.2 |
ibmPtyQueueingLBALink Bandwidth Allocation (LBA):
Identifies the number of packets that will be transmitted
from this queue before a lower priority queue will be
serviced.ro INTEGER .1.3.6.1.4.1.2.6.2.19.2.1.1.3 |
ibmPtyQueueingQBRQueue Bandwidth Reservation (QBR):
Identifies the percentage of buffer space on
a serial adapter that is allotted to a
particular queue for transmission of packets.
The sum of all QBR values on an interface
must add up to 100%.ro INTEGER .1.3.6.1.4.1.2.6.2.19.2.1.1.4 |
ibmPtyQueueingDiscardsIdentifies the number of packets discarded
from this queue due to a queue overflow.ro Counter .1.3.6.1.4.1.2.6.2.19.2.1.1.5 |
ibmTG OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.2.19.3 |
ibmTGTableThis table provides information about serial
point-to-point links which are participating
in the 2 T1 in a transmission group (TG)
function. SEQUENCE OF IbmTGEntry .1.3.6.1.4.1.2.6.2.19.3.1 |
ibmTGEntryEach entry identifies an interface participating
in the 2 T1 in a TG function, along with its
associated TG name and which protocol is
using the function. IbmTGEntry .1.3.6.1.4.1.2.6.2.19.3.1.1 |
ibmTGProtocolDefines the protocol that is supported for
this particular interface and TG name.
Currently, only the IP protocol is supportedro Enumeration .1.3.6.1.4.1.2.6.2.19.3.1.1.1 |
ibmTGIfIndexDefines the interface associated with this
particular TG name and protocol. This interface
is the same interface as defined by the ifIndex
variable of the MIB-II interfaces group.ro INTEGER .1.3.6.1.4.1.2.6.2.19.3.1.1.2 |
ibmTGEnableDefines whether the 2 T1 in a TG function
is enabled on this interfacero Enumeration .1.3.6.1.4.1.2.6.2.19.3.1.1.3 |
ibmTGGroupNameDefines the common TG name assigned to all interfaces in this group.
All interfaces with the same TG name will belong to the same group.ro DisplayString .1.3.6.1.4.1.2.6.2.19.3.1.1.4 |
ibmTGSwitchOutsCounts the number of times a packet had to be switched
to another interface in the transmission group.ro Counter .1.3.6.1.4.1.2.6.2.19.3.1.1.5 |