HiplexAF-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HiplexAF-MIB.
83
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
sni OBJECT IDENTIFIER .1.3.6.1.4.1.231 |
RFC1213-MIB Unknown .1.3.6.1.4.1.231 |
sniProductMibs OBJECT IDENTIFIER .1.3.6.1.4.1.231.2 |
sniHiplexAF OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35 |
hiplexAFObjects OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1 |
hiplexAFGlobalData OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.1 |
hiplexAFVersionVersion of Hiplex AF agentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.1.1 |
hiplexAFSPVSUseridUser-Id of Hiplex AF (usually TSOS)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.1.2 |
hiplexAFSPVSCatidCatalog-Id of Shared Pubset containing
Jobvariables and Files of Hiplex AFrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.1.3 |
hiplexAFStateState of Hiplex AF:
started: at least one main procedure has been started
on one host
stopped: Hiplex AF is stopped. No Hiplex AF procedure is
running on any host
undefined: state of Hiplex AF is unkown. Jobvariables
with correct value could not be found.
State may be set to stopped if it is started.rw Enumeration .1.3.6.1.4.1.231.2.35.1.1.4 |
hiplexAFTermHostBCAM Name of the system where termination request
for Hiplex AF was started.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.1.5 |
hiplexAFHostInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.2 |
hiplexAFHostTabNumnumber of Hosts in the availability clusterro INTEGER .1.3.6.1.4.1.231.2.35.1.2.1 |
hiplexAFHostTableThe table of host in the availability cluster SEQUENCE OF HiplexAFHostEntry .1.3.6.1.4.1.231.2.35.1.2.2 |
hiplexAFHostEntryentry for each host HiplexAFHostEntry .1.3.6.1.4.1.231.2.35.1.2.2.1 |
hiplexAFHostNameBCAM Name of the systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.2.2.1.1 |
hiplexAFHostEventIdRequest Indicator for the main procedurero Enumeration .1.3.6.1.4.1.231.2.35.1.2.2.1.2 |
hiplexAFHostStateIndState of the main procedure. Indicator for
partitipation of the host.
State may only be set to working if it is terminated.rw Enumeration .1.3.6.1.4.1.231.2.35.1.2.2.1.3 |
hiplexAFHostOperatorRoleValue of parameter Operator-Role of START-XAF commandrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.2.2.1.4 |
hiplexAFHostHomeCatidHome Catalog Id of the systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.2.2.1.5 |
hiplexAFHostSystemIdSystemId of the system according to the output
of the SHOW-SHARED-PUBSET-commandro INTEGER .1.3.6.1.4.1.231.2.35.1.2.2.1.6 |
hiplexAFHostBS2VersionVersion of BS2000 on the system according to the
output of the SHOW-SHARED-PUBSET-commandro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.2.2.1.7 |
hiplexAFHostImcatIndSharer State of the host, according to the output
of the SHOW-SHARED-PUBSET-commandro Enumeration .1.3.6.1.4.1.231.2.35.1.2.2.1.8 |
hiplexAFHostMasterSlaveIndSharer type of the hostro Enumeration .1.3.6.1.4.1.231.2.35.1.2.2.1.9 |
hiplexAFHostSnmpAgentStateIndState of the SNMP-Subagent.
State may be set to not-working if it is working.rw Enumeration .1.3.6.1.4.1.231.2.35.1.2.2.1.10 |
hiplexAFSWUInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.3 |
hiplexAFSWUTabNumnumber of Switch Units in the availability clusterro INTEGER .1.3.6.1.4.1.231.2.35.1.3.1 |
hiplexAFSWUTableThe table of host in the availability cluster SEQUENCE OF HiplexAFSWUEntry .1.3.6.1.4.1.231.2.35.1.3.2 |
hiplexAFSWUEntryentry for each host HiplexAFSWUEntry .1.3.6.1.4.1.231.2.35.1.3.2.1 |
hiplexAFSWUNameName of the switch unitro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.3.2.1.1 |
hiplexAFSWUCreaTimeCreation Time of Switch Unit (configuration file)ro DateAndTime SYNTAX DisplayString .1.3.6.1.4.1.231.2.35.1.3.2.1.2 |
hiplexAFSWUWorkSystemBCAM Name of the system which presently is
work system for this switch unit. Changing the
value of this object will start a switch procedure.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.3.2.1.3 |
hiplexAFSWUVirtHostBCAM Name of the virtual host of the switch unitro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.3.2.1.4 |
hiplexAFSWUVirtHostActName of the procedure for activating the routes to
the virtual hostro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.3.2.1.5 |
hiplexAFSWUVirtHostDeactName of the procedure for deactivating the routes to
the virtual hostro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.3.2.1.6 |
hiplexAFSWUFEPNumberNumber of front end processorsro INTEGER .1.3.6.1.4.1.231.2.35.1.3.2.1.7 |
hiplexAFSWUPubsetNumberNumber of non-shared pubsets used by applications
of the switch unitro INTEGER .1.3.6.1.4.1.231.2.35.1.3.2.1.8 |
hiplexAFSWUApplicationNumberNumber of applications contained in this
switch unitro INTEGER .1.3.6.1.4.1.231.2.35.1.3.2.1.9 |
hiplexAFSWUHostParamInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.4 |
hiplexAFSWUHostParamTableThe table of host specific Parameters of Switch Units SEQUENCE OF HiplexAFSWUHostParamEntry .1.3.6.1.4.1.231.2.35.1.4.1 |
hiplexAFSWUHostParamEntryentry for each host HiplexAFSWUHostParamEntry .1.3.6.1.4.1.231.2.35.1.4.1.1 |
hiplexAFSWUHostParamEventIdLast action of the switch unit on the systemro Enumeration .1.3.6.1.4.1.231.2.35.1.4.1.1.1 |
hiplexAFSWUHostParamStateIndState of the Switch Unit. Value terminated may be
changed to work or standbyrw Enumeration .1.3.6.1.4.1.231.2.35.1.4.1.1.2 |
hiplexAFSWUHostParamPriorityPriority of the host in case of an automatic switchrw INTEGER .1.3.6.1.4.1.231.2.35.1.4.1.1.3 |
hiplexAFSWUHostParamOperatorRoleValue of parameter Operator-Role of
START-SWITCH-UNIT commandrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.4.1.1.4 |
hiplexAFSWUHostFEPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.5 |
hiplexAFSWUHostFEPTabNumnumber of FEP Entriesro INTEGER .1.3.6.1.4.1.231.2.35.1.5.1 |
hiplexAFSWUHostFEPTableThe table of parameters of switch units concerning
front end processors SEQUENCE OF HiplexAFSWUHostFEPEntry .1.3.6.1.4.1.231.2.35.1.5.2 |
hiplexAFSWUHostFEPEntryEntry describing a relation between a switch units
and front end processor HiplexAFSWUHostFEPEntry .1.3.6.1.4.1.231.2.35.1.5.2.1 |
hiplexAFSWUHostFEPIndexIndex of Front End Processorro INTEGER .1.3.6.1.4.1.231.2.35.1.5.2.1.1 |
hiplexAFSWUHostFEPNameBCAM Name of Front End Processorrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.5.2.1.2 |
hiplexAFSWUHostFEPPortnumberNumber of Port used for the Systemrw INTEGER .1.3.6.1.4.1.231.2.35.1.5.2.1.3 |
hiplexAFSWUVolumeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.6 |
hiplexAFSWUVolumeTabNumnumber of data volumesro INTEGER .1.3.6.1.4.1.231.2.35.1.6.1 |
hiplexAFSWUVolumeTableTable of data volumes SEQUENCE OF HiplexAFSWUVolumeEntry .1.3.6.1.4.1.231.2.35.1.6.2 |
hiplexAFSWUVolumeEntryEntry for each data volume HiplexAFSWUVolumeEntry .1.3.6.1.4.1.231.2.35.1.6.2.1 |
hiplexAFSWUVolumeNameName of Data Volumero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.6.2.1.1 |
hiplexAFSWUVolumeTypeNameName of Data Volumetypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.6.2.1.2 |
hiplexAFSWUVolumeTypeType of data volumero Enumeration .1.3.6.1.4.1.231.2.35.1.6.2.1.3 |
hiplexAFSWUVolumeImportProcName of procedure importing data volumero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.6.2.1.4 |
hiplexAFSWUVolumeExportProcName of procedure exporting data volumero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.6.2.1.5 |
hiplexAFSWUApplicationInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.7 |
hiplexAFSWUApplicationTabNumNumber of applicationsro INTEGER .1.3.6.1.4.1.231.2.35.1.7.1 |
hiplexAFSWUApplicationTableTable of applications SEQUENCE OF HiplexAFSWUApplicationEntry .1.3.6.1.4.1.231.2.35.1.7.2 |
hiplexAFSWUApplicationEntryentry for each application HiplexAFSWUApplicationEntry .1.3.6.1.4.1.231.2.35.1.7.2.1 |
hiplexAFSWUApplicationMonJVNameName of jobvariable monitoring applicationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.7.2.1.1 |
hiplexAFSWUApplicationTypeApplication typero Enumeration .1.3.6.1.4.1.231.2.35.1.7.2.1.2 |
hiplexAFSWUApplicationStartProcProcedure used to start the applicationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.7.2.1.3 |
hiplexAFSWUApplicationStopProcProcedure used to stop the applicationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.7.2.1.4 |
hiplexAFPubsetVolumeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.1.8 |
hiplexAFTrapFilterTableThis double-indexed table is a matrix containing an indicator
for each pair (host1,host2). A HIPLEX-AF subagent residing
on host1 will send traps concerning events of host2 only if
the indicator has value yes. SEQUENCE OF HiplexAFTrapFilterEntry .1.3.6.1.4.1.231.2.35.1.20 |
hiplexAFTrapFilterEntryEntry for each pair (host1,host2) HiplexAFTrapFilterEntry .1.3.6.1.4.1.231.2.35.1.20.1 |
hiplexAFTrapFilterHost1NameBCAM Name of the system where HIPLEX-AF
subagent is runningro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.20.1.1 |
hiplexAFTrapFilterHost2NameBCAM Name of the system in the HIPLEX-AF cluster.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.35.1.20.1.2 |
hiplexAFTrapFilterTrapSendIndyes: traps will be sent.
no: no traps will be sent.rw Enumeration .1.3.6.1.4.1.231.2.35.1.20.1.3 |
hiplexAFTraps OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.35.2 |
hiplexAFStartHiplex AF main procedure has been started. TRAP-TYPE .1.3.6.1.4.1.231.2.35.2.0.301 |
hiplexAFSWUStartSwitch unit procedure has been started. TRAP-TYPE .1.3.6.1.4.1.231.2.35.2.0.302 |
hiplexAFStopTermination of Hiplex AF has been started. TRAP-TYPE .1.3.6.1.4.1.231.2.35.2.0.303 |
hiplexAFCrashA system has been terminated abnormally. TRAP-TYPE .1.3.6.1.4.1.231.2.35.2.0.304 |
hiplexAFSWUAppStopThe applications of a switch unit will be stopped. TRAP-TYPE .1.3.6.1.4.1.231.2.35.2.0.305 |
hiplexAFSWUAppStartThe applications of a switch unit will be started. TRAP-TYPE .1.3.6.1.4.1.231.2.35.2.0.306 |
hiplexAFSWUStopSwitch unit procedure has been stopped. TRAP-TYPE .1.3.6.1.4.1.231.2.35.2.0.307 |