HWMUSA-SHDSL-CPE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HWMUSA-SHDSL-CPE-MIB.
191
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
191 total| Object Name |
|---|
musa OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6 |
ias OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7 |
hwIasService OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4 |
hwMusaShdsl OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4 |
hwShdslCPE OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4.2 |
hwShdslCPECommon OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4.2.1 |
umCommonInventoryTableA table containing common inventory information. SEQUENCE OF UmCommonInventoryEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1 |
umCommonInventoryEntryAn entry in umCommonInventoryTable. UmCommonInventoryEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1 |
umCommonInventoryModelThis variable indicates the model number.ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.1 |
umCommonInventorySwVerThis variable indicates the software version.
format: a.bcd
(a, b, c, d: 0 ~ 9)ro DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.2 |
umCommonInventoryHwVerThis variable indicates the hardware version.
format: a.bcd
(a, b, c, d: 0 ~ 9)ro DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.3 |
umCommonInventoryDevName<write-operation is not provided for remote-side>
This variable indicates the device name.rw DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.4 |
umCommonConfigTableA table containing common config information. SEQUENCE OF UmCommonConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2 |
umCommonConfigEntryAn entry in umCommonConfigTable. UmCommonConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1 |
umCommonConfigDateThis variable is used to define date information of the device.
The format is MM/DD/YYYY. MM means month, DD is day, and YYYY stands for year.
The range is from 01/01/1990 to 12/31/2100.rw DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1.1 |
umCommonConfigTimeThis variable is used to define time information of the device.
The format is HH:MM:SS. HH means hour, MM is to indicate minute and SS is for second.rw DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1.2 |
umCommonActionTableA table containing actions to CPE. SEQUENCE OF UmCommonActionEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3 |
umCommonActionEntryAn entry in umCommonActionTable. UmCommonActionEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1 |
umCommonActionDbSaveThis variable is to initiate the VCDB command.
1: saverw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1.1 |
umCommonActionWarmStartThis value is to restart the device.
TRUE (1): warm startrw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1.2 |
umCommonSnmpConfigTableA table containing SNMP configuration information.deprecated SEQUENCE OF UmCommonSnmpConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4 |
umCommonSnmpConfigEntryAn entry in umCommonSnmpConfigTable.deprecated UmCommonSnmpConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1 |
umCommonSnmpConfigIpAddressThis variable is to indicate IP address of the device.rodeprecated IpAddress .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.1 |
umCommonSnmpConfigIpSubnetMaskThis variable is to define the subnet mask of the IP address of the device.rodeprecated IpAddress .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.2 |
umCommonSnmpConfigIpGatewayIpThis variable is to define the gateway IP address of the device.rodeprecated IpAddress .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.3 |
umCommonSnmpConfigTrapIpAddress1This variable is to define the IP address where the manager receives trap.rodeprecated IpAddress .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.4 |
umCommonSnmpConfigTrapIpPortNum1This variable is to define the UDP port number where the manager receives trap.
The possible values are:
162 (default)
62000
62001
62002rodeprecated INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.5 |
umCommonSnmpConfigTrapIpAddress2This variable is to define the IP address where the manager receives trap.rodeprecated IpAddress .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.6 |
umCommonSnmpConfigTrapIpPortNum2This variable is to define the UDP port number where the manager receives trap.
The possible values are:
162 (default)
62000
62001
62002rodeprecated INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.7 |
hwShdslCPESdsl OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2 |
umSdslConfigTableA table containing Sdsl configuration information. SEQUENCE OF UmSdslConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1 |
umSdslConfigEntryAn entry in umSdslConfigTable. UmSdslConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1 |
umSdslConfigNETypeThis variable is to set this STU-C or STU-R configuration.
(0): STU-C (LT mode)
(1): STU-R (NT mode)rodeprecated INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.1 |
umSdslConfigRateAdaptiveThis variable is to enable/disable the rate adaptive configuration.
(0): Fixed
(1): Adaptiverw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.2 |
umSdslConfigDataRateThis variable is to set data rate (N*64k) of Sdsl.
If Rate Adaptive is TRUE, the value is invalid
till Rate Adaptive is FALSE.ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.3 |
umSdslResetPerformanceThis value is to reset performance register.
1: reset all current performance data
2: reset current ES
3: reset current SES
4: reset current UAS
5: reset all history performance data
6: reset history ES
7: reset history SES
8: reset history UASrw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.4 |
umSdslTimeElapsedThe number of seconds that have elapsed since
the beginning of the current error-measurement
period.ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.5 |
umSdslValidIntervalsThe number of previous intervals for which
valid data was collected. The value will be 96
unless the interface was brought on-line within
the last 24 hours, in which case the value will
be the number of complete 15 minute intervals
the since interface has been online.ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.6 |
umSdslThresholdTableA table containing MSDSL configuration information. SEQUENCE OF UmSdslThresholdEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2 |
umSdslThresholdEntryAn entry in umSdslThresholdTable. UmSdslThresholdEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1 |
umSdslThreshold15mESThis variable defines the 15-minute threshold of ES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.1 |
umSdslThreshold15mSESThis variable defines the 15-minute threshold of SES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.2 |
umSdslThreshold15mUASThis variable defines the 15-minute threshold of UAS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.3 |
umSdslThreshold24hESThis variable defines the 24-hour threshold of ES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.4 |
umSdslThreshold24hSESThis variable defines the 24-hour threshold of SES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.5 |
umSdslThreshold24hUASThis variable defines the 24-hour threshold of UAS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.6 |
umSdslThresholdSNRMarginThis variable indicates the SNR margin threshold of the Sdsl line.
1~15: valid valuerw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.7 |
umSdslThresholdLoopAttenuationThis variable indicates the Loop Attenuation threshold of the Sdsl line.
1~127:rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.8 |
umSdslPmCurrentTableThe Sdsl PM Current table. SEQUENCE OF UmSdslPmCurrentEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3 |
umSdslPmCurrentEntryAn entry in the Sdsl Pm Current table. UmSdslPmCurrentEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1 |
umSdslPmCurrentESThe number of Errored Seconds encountered by an Sdsl
during the current interval.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.1 |
umSdslPmCurrentSESThe number of Severely Errored Seconds encountered by an Sdsl
during the current interval.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.2 |
umSdslPmCurrentUASThe number of Unavailable Seconds encountered by an Sdsl
during the current interval.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.3 |
umSdslPmIntervalTableThe Sdsl Interval table. SEQUENCE OF UmSdslPmIntervalEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4 |
umSdslPmIntervalEntryAn entry in the Sdsl Interval table. UmSdslPmIntervalEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1 |
umSdslPmIntervalIndexA number between 1 and 96, where 1 is the most recently completed 15 minute interval and
96 is the least recently completed 15 minutes interval. INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.1 |
umSdslPmIntervalESThe number of Errored Seconds encountered by an Sdsl in one interval.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.2 |
umSdslPmIntervalSESThe number of Severely Errored Seconds encountered by an Sdsl in one interval.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.3 |
umSdslPmIntervalUASThe number of Unavailable Seconds encountered by an Sdsl in one interval.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.4 |
umSdslPmCurrentDayTableThe Sdsl PM Current Day table. (0:00AM ~ the last completed quarter) SEQUENCE OF UmSdslPmCurrentDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5 |
umSdslPmCurrentDayEntryAn entry in the Sdsl Pm Current Day table. UmSdslPmCurrentDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1 |
umSdslPmCurrentDayESThe number of Errored Seconds encountered by an Sdsl
during the Current Day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.1 |
umSdslPmCurrentDaySESThe number of Severely Errored Seconds encountered by an Sdsl
during the Current Day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.2 |
umSdslPmCurrentDayUASThe number of Unavailable Seconds encountered by an Sdsl
during the Current Day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.3 |
umSdslPmDayTableThe SDSL Pm Day table. SEQUENCE OF UmSdslPmDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6 |
umSdslPmDayEntryAn entry in the Sdsl Pm Day table. UmSdslPmDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1 |
umSdslPmDayIndexA number between 1 and 7, where 1 is the most recently completed day and
7 is the least recently completed day. INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.1 |
umSdslPmDayESThe number of Errored Seconds encountered by an Sdsl in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.2 |
umSdslPmDaySESThe number of Severely Errored Seconds encountered by an Sdsl in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.3 |
umSdslPmDayUASThe number of Unavailable Seconds encountered by an Sdsl in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.4 |
umSdslTestTableA table containing SHDSL testing function. SEQUENCE OF UmSdslTestEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7 |
umSdslTestEntryAn entry in umSdslTestTable. UmSdslTestEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1 |
umSdslTestLoopbackThis value is to set loopback.
0: Release
2: Loopback toward Networkrw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.1 |
umSdslTestPatternThis variable is used to set test pattern.
1: 511
2: 2047
3: PRBS
Support Eoc Version 1.02 (23/04/2002)rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.2 |
umSdslTestPeriodThis variable is used to get/set test period in second.
A value of 0 means non-stop testing.rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.3 |
umSdslTestStartThis value is to start or stop testing(only local).
TRUE (1): Start
FALSE (2): Stoprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.4 |
umSdslTestInsertOneBitErrorThis variable is used to initiate pause test pattern.
This is used in error insertion application.
(1) Insert error rate(rate= 10E-1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.5 |
umSdslTestElapsedTimeThis variable is to indicate elapsed time of testing in second.ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.6 |
umSdslTestErrCountThis variable is to indicate error count of testing.ro DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.7 |
umSdslTestErrRateThis variable is to indicate error rate of testing,
which is 'a.bcx10E(-d)', a, b, c: 0..9, d: 1..9.ro DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.8 |
hwShdslCPEV35 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3 |
umSdslV35ConfigTableThe config table contains Ne config items. SEQUENCE OF UmSdslV35ConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1 |
umSdslV35ConfigEntryAn entry in the config table UmSdslV35ConfigEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1 |
umSdslV35ConfigCurrentDataRateThis variable is to get current data rate (N*64k) of Sdsl V35.ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.1 |
umSdslV35ConfigCurrentTimingSrcThis variable is to get the current timing source of the system.
0: internal
1: from loop (SDSL)
2: from DTE (V.35)rodeprecated INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.2 |
umSdslV35ConfigTimingSrcThis variable is to get/set the setted timing source of the system.
0: internal
1: from loop (SDSL)
2: from DTE (V.35)rwdeprecated INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.3 |
umSdslV35DTETableThe alarm table contains DTE. SEQUENCE OF UmSdslV35DTEEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2 |
umSdslV35DTEEntryAn entry in the alarm table UmSdslV35DTEEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1 |
umSdslV35DTEStatusThe variable represents which port reports the DTE Status.
(bit)
0 : RTS
1 : CTS
2 : DCD
3 : DSRro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.1 |
umSdslV35DTERTSThe variable represents which port reports the RTS Config Status.
0 : RTS from DTE
1 : RTS Permanent Onrw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.2 |
umSdslV35TailFuncThe variable represents tail function switch.
0 : Tail off
1 : Tail onrw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.3 |
umSdslV35LoopbackTableThe V35 Loopback Table. SEQUENCE OF UmSdslV35LoopbackEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3 |
umSdslV35LoopbackEntryAn entry in the Sdsl Testing table. UmSdslV35LoopbackEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3.1 |
umSdslV35LoopbackThis value is to set loopback.
0: Release
1: Toward DTE Loop
2: Toward Network Loop
3: Initial in-band Loop (V.54)rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3.1.1 |
umSdslV35AlarmTableThe alarm table contains alarm event history. SEQUENCE OF UmSdslV35AlarmEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4 |
umSdslV35AlarmEntryAn entry in the alarm table UmSdslV35AlarmEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1 |
umSdslV35ClearAlarmHistoryThe variable initiate the clear alarm history action(Set 1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1.1 |
umSdslV35AlarmStatusThe variable initiate the current alarm status.
(bit)
bit0: Loss of SDSL synchronization word (LOSW)
bit1: (SDSL) ES exceed day threshold
bit2: (SDSL) ES exceed quarter threshold
bit3: (SDSL) SES exceed day threshold
bit4: (SDSL) SES exceed quarter threshold
bit5: (SDSL) UAS exceed day threshold
bit6: (SDSL) UAS exceed quarter threshold
bit7: (SDSL) SNR exceed threshold
bit8: (SDSL) Loop Attuattion exceed threshold
bit9~31: Reserved
DataType = 72ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1.2 |
hwCPET1E1 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4 |
umLiuTableThe LIU table. The LIU attributes regarding configuration and performance are defined in RFC1406. SEQUENCE OF UMLiuEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1 |
umLiuEntryAn entry in the LIU table. UMLiuEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1 |
umLiuE1TransparentThis value gets/sets the E1 Transparency.
Disable(0),
Enable (1)rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.1 |
umLiuLineDriveThis variable is to define the value of line drive.
75_Ohm(0),
120_Ohm(1)rw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.2 |
umLiuIdleCodewordThis variable represents the value of idle code word.
But the write-operation is preserved for future use.
If you take write-operation, <Generic error> will be returned.rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.3 |
umLiuE1SlotMapThis table defines the corresponding customer equipment interface for each time slot of network interface.
Each bit represents one time slot. '1' stands for occupied.
The leftmost bit represents time slot 31, and rightmost bit represents time slot 0.rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.4 |
umLiuResetPerformanceThis value is to reset performance register for this port.
1: reset all current performance data
2: reset current LCV
3: reset current PCV
4: reset current ES
5: reset current SES
6: reset current SEFS
7: reset current UAS
8: reset current CSS
9: reset current DM
10: reset current CS
11: reset current FBE
51: reset all history performance data
52: reset history LCV
53: reset history PCV
54: reset history ES
55: reset history SES
56: reset history SEFS
57: reset history UAS
58: reset history CSS
59: reset history DM
60: reset history CS
61: reset history FBErw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.5 |
umLiuTestTableThe LIU table. The LIU attributes regarding configuration and performance are defined in RFC1406. SEQUENCE OF UMLiuTestEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2 |
umLiuTestEntryAn entry in the LIU Test table. UMLiuTestEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1 |
umLiuLoopbackConfigThis value is to set LIU loopback.
0: release
1: payload loopback
2: line loopback
3: local loopbackrw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.1 |
umLiuLoopbackStatusThis value is to indicate the LIU loopback status.
0: released
1: payload loopback
2: line loopback
3: local loopbackro Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.2 |
umLiuTestPatternThis variable is used to set test pattern.
1: 2E15-1_PRBS
3: 2047rw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.3 |
umLiuTestPeriodThis variable is used to set test period in second.
A value of 0 means non-stop testing.rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.4 |
umLiuTestStartThis value is to start or stop testing.
1: Start
2: Stoprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.5 |
umLiuInsertedErrorRateThis value is used to set inserted error rate.
Inserted error rate = 1*10E(-n), where n is the set value.
Set 0 to stop insertting errors.rw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.6 |
umLiuElapsedTimeThis variable is to indicate elapsed time of testing.ro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.7 |
umLiuTestErrCountThis variable is to indicate error count of testing.ro DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.8 |
umLiuTestErrRateThis variable is to indicate error rate of testing, which is 'a.bcx10E(-d)', a, b, c: 0..9, d: 1..9.ro DisplayString .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.9 |
umLiuThresholdTableThe Performance threshold table. SEQUENCE OF UMLiuThresholdEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3 |
umLiuThresholdEntryAn entry in Performance threshold table. UMLiuThresholdEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1 |
umLiuThreshold15mLCVThis variable defines the threshold of LCV. This variable is valid for near end UM.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.1 |
umLiuThreshold15mPCVThis variable defines the threshold of PCV.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.2 |
umLiuThreshold15mESThis variable defines the threshold of ES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.3 |
umLiuThreshold15mSESThis variable defines the threshold of SES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.4 |
umLiuThreshold15mSEFSThis variable defines the threshold of SEFS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.5 |
umLiuThreshold15mUASThis variable defines the threshold of UAS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.6 |
umLiuThreshold15mCSSThis variable defines the threshold of CSS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.7 |
umLiuThreshold15mDMThis variable defines the threshold of DM.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.8 |
umLiuThreshold24hLCVThis variable defines the threshold of LCV. This variable is valid for near end UM.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.9 |
umLiuThreshold24hPCVThis variable defines the threshold of PCV.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.10 |
umLiuThreshold24hESThis variable defines the threshold of ES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.11 |
umLiuThreshold24hSESThis variable defines the threshold of SES.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.12 |
umLiuThreshold24hSEFSThis variable defines the threshold of SEFS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.13 |
umLiuThreshold24hUASThis variable defines the threshold of UAS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.14 |
umLiuThreshold24hCSSThis variable defines the threshold of CSS.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.15 |
umLiuThreshold24hDMThis variable defines the threshold of DM.rw Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.16 |
umLiuPmData OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4 |
umLiuPmCurrent15mTableThe Liu PM Current table. SEQUENCE OF UMLiuPmCurrent15mEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1 |
umLiuPmCurrent15mEntryAn entry in the Liu Pm Current 15 minutes table. UMLiuPmCurrent15mEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1 |
umLiuPmCurrent15mLCVThe number of Line Code Violations encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.1 |
umLiuPmCurrent15mPCVThe number of Path Coding Violations encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.2 |
umLiuPmCurrent15mESThe number of Errored Seconds encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.3 |
umLiuPmCurrent15mSESThe number of Severely Errored Seconds encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.4 |
umLiuPmCurrent15mSEFSThe number of Severely Errored Framing Seconds encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.5 |
umLiuPmCurrent15mUASThe number of Unavailable Seconds encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.6 |
umLiuPmCurrent15mCSSThe number of Controlled Slip Seconds encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.7 |
umLiuPmCurrent15mDMThe number of Degraded Minutes encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.8 |
umLiuPmCurrent15mCSThe number of Controlled Slip encountered by an LIU interface in the current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.9 |
umLiuPmCurrent15mFBEThe number of Loss Of Frame encountered by an LIU interface in current quarter.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.10 |
umLiuPm15mTableThe Liu PM 15 minutes Interval table. SEQUENCE OF UMLiuPm15mEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2 |
umLiuPm15mEntryAn entry in the Liu Pm Interval table. UMLiuPm15mEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1 |
umLiuPm15mIndexA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid). INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.1 |
umLiuPm15mLCVThe number of Line Code Violations encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.2 |
umLiuPm15mPCVThe number of Path Coding Violations encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.3 |
umLiuPm15mESThe number of Errored Seconds encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.4 |
umLiuPm15mSESThe number of Severely Errored Seconds encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.5 |
umLiuPm15mSEFSThe number of Severely Errored Framing Seconds encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.6 |
umLiuPm15mUASThe number of Unavailable Seconds encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.7 |
umLiuPm15mCSSThe number of Controlled Slip Seconds encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.8 |
umLiuPm15mDMThe number of Degraded Minutes encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.9 |
umLiuPm15mCSThe number of Controlled Slip encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.10 |
umLiuPm15mFBEThe number of Loss Of Frame encountered by a
LIU interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.11 |
umLiuPmCurrentDayTableThe Liu PM Current Day table. SEQUENCE OF UMLiuPmCurrentDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3 |
umLiuPmCurrentDayEntryAn entry in the Liu Pm Current Day table. UMLiuPmCurrentDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1 |
umLiuPmCurrentDayLCVThe number of Line Code Violations encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.1 |
umLiuPmCurrentDayPCVThe number of Path Coding Violations encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.2 |
umLiuPmCurrentDayESThe number of Errored Seconds encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.3 |
umLiuPmCurrentDaySESThe number of Severely Errored Seconds encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.4 |
umLiuPmCurrentDaySEFSThe number of Severely Errored Framing Seconds encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.5 |
umLiuPmCurrentDayUASThe number of Unavailable Seconds encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.6 |
umLiuPmCurrentDayCSSThe number of Controlled Slip Seconds encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.7 |
umLiuPmCurrentDayDMThe number of Degraded Minutes encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.8 |
umLiuPmCurrentDayCSThe number of Controlled Slip encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.9 |
umLiuPmCurrentDayFBEThe number of Loss Of Frame encountered by an LIU interface in current day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.10 |
umLiuPmDayTableThe Liu PM Day table. SEQUENCE OF UMLiuPmDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4 |
umLiuPmDayEntryAn entry in the Liu Pm Day table. UMLiuPmDayEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1 |
umLiuPmDayIndexA number between 1 and 7, where 1 is PM data of the most recently completed day and
7 is PM data of the least completed recently day. INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.1 |
umLiuPmDayLCVThe number of Line Code Violations encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.2 |
umLiuPmDayPCVThe number of Path Coding Violations encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.3 |
umLiuPmDayESThe number of Errored Seconds encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.4 |
umLiuPmDaySESThe number of Severely Errored Seconds encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.5 |
umLiuPmDaySEFSThe number of Severely Errored Framing Seconds encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.6 |
umLiuPmDayUASThe number of Unavailable Seconds encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.7 |
umLiuPmDayCSSThe number of Controlled Slip Seconds encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.8 |
umLiuPmDayDMThe number of Degraded Minutes encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.9 |
umLiuPmDayCSThe number of Controlled Slip encountered by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.10 |
umLiuPmDayFBEThe number of Loss Of Frame by an LIU interface in one day.ro Gauge32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.11 |
umSdslE1T1AlarmTableThe SDSL E1T1 alarm table. SEQUENCE OF UMSdslE1T1AlarmEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5 |
umSdslE1T1AlarmEntryAn entry in the SDSL alarm table. UMSdslE1T1AlarmEntry .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1 |
umSdslE1T1ClearAlarmHistoryThe variable initiate the clear alarm history action(Set 1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.1 |
umSdslE1T1LocalAlarmStatusThe variable initiate the local current alarm status.
(bit)
0: (E1T1) E1 LOS Failure (Loss of signal)
1: (E1T1) Loss of Frame Alignment
2: (E1T1) Loss of E1T1 Multiframe Alignment
3: (E1T1) AIS received
4: (E1T1) AIS received in TS16
5: (E1T1) RAI received
6: (E1T1) RAI received in TS16
7: (E1T1) Bit errors exceed error ratio
8: (E1T1) LCV exceed day threshold
9: (E1T1) LCV exceed quarter threshold
10: (E1T1) PCV exceed day threshold
11: (E1T1) PCV exceed quarter threshold
12: (E1T1) ES exceed day threshold
13: (E1T1) ES exceed quarter threshold
14: (E1T1) SES exceed day threshold
15: (E1T1) SES exceed quarter threshold
16: (E1T1) SEFS exceed day threshold
17: (E1T1) SEFS exceed quarter threshold
18: (E1T1) UAS exceed day threshold
19: (E1T1) UAS exceed quarter threshold
20: (E1T1) CSS exceed day threshold
21: (E1T1) CSS exceed quarter threshold
22: (E1T1) DM exceed day threshold
23: (E1T1) DM exceed quarter threshold
24~31 Reserved
DataType 103ro Unsigned32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.2 |
umSdslE1T1SdslAlarmStatusThe variable initiate the E1T1 SHDSL current alarm status.
(bit)
0: (SDSL) LOSW Failure (Loss of SDSL synchronization word)
1: (SDSL) ES exceed day threshold
2: (SDSL) ES exceed quarter threshold
3: (SDSL) SES exceed day threshold
4: (SDSL) SES exceed quarter threshold
5: (SDSL) UAS exceed day threshold
6: (SDSL) UAS exceed quarter threshold
7: (SDSL) SNR exceed threshold
8: (SDSL) Loop Attuattion exceed threshold
9~31 Reserved
DataType 103ro Unsigned32 .1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.3 |