HWMUSA-SHDSL-CO-MIB
Standard SNMP MIB module defining data structures for HWMUSA-SHDSL-CO-MIB.
Imported Objects
Objects
17 total| Object Name |
|---|
musa OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6 |
IF-MIB Unknown .1.3.6.1.4.1.2011.2.6 |
ias OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7 |
hwIasService OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4 |
hwMusaShdsl OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4 |
hwShdslCO OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.6.7.4.4.1 |
shdslPortTypeConfTableThis table supports the configuration of port type in the SLC and SLF board SEQUENCE OF ShdslPortTypeConfEntry .1.3.6.1.4.1.2011.2.6.7.4.4.1.1 |
shdslPortTypeConfEntryAn entry in the shdslPortTypeConfTable. Each entry
represents the shdsl port type.It is indexed by
the ifIndex of the associated shdsl port. ShdslPortTypeConfEntry .1.3.6.1.4.1.2011.2.6.7.4.4.1.1.1 |
shdslPortTypeConfigThis object is not allowed to set when the associated port is
in service (PVC) or its state is not deactived.When the port is
set to a kind of type,its modem cpe interface should be
the same type as the port.rw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.1.1.1.1 |
shdslPortBindConfTableThis table supports the configuration of port type in the SLC and SLF board SEQUENCE OF ShdslPortBindConfEntry .1.3.6.1.4.1.2011.2.6.7.4.4.1.2 |
shdslPortBindConfEntry ShdslPortBindConfEntry .1.3.6.1.4.1.2011.2.6.7.4.4.1.2.1 |
shdslPortBindPriPositionro INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.1.2.1.1 |
shdslPortBindSlavPositionrw INTEGER .1.3.6.1.4.1.2011.2.6.7.4.4.1.2.1.2 |
shdslPortBindConfigSHLA֧˿ڰߣʵԡ˿һ˿ڣΪż˿ڣ
һ˿ڣΪ˿ںţ1·ʱ밴˿·
ж˿ڲᰴ˿ڽУ˿ڲǵϱ澯Ϣǰÿ
˿ϱ ͬʱҪģspanprofileconfigtablеwireinterface
wireinterfacefour wire£minratemaxrateҪȣΧΪ3844608Ϊ
128ıڼ˿ǣ´ļ·ģwireinterfaceӦúö˿ڵİǰ
ƥ䡣rw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.1.2.1.3 |
hwShdslPortConfTableshdsl port configuration Table
Shdsl˿ڵԱ SEQUENCE OF HwShdslPortConfEntry .1.3.6.1.4.1.2011.2.6.7.4.4.1.3 |
hwShdslPortConfEntryAn entry in the hwShdslPortTable.
ñwalk,ж˿ڵ
ñΪifIndex HwShdslPortConfEntry .1.3.6.1.4.1.2011.2.6.7.4.4.1.3.1 |
hwShdslPortServiceMode˿ҵģʽgetset
1ΪATMģʽ2ΪTDMģʽϵͳĬΪATMģʽrw Enumeration .1.3.6.1.4.1.2011.2.6.7.4.4.1.3.1.1 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.