HUAWEI-WLAN-SYS-MIB
AI MIB Summary
The HUAWEI-WLAN-SYS-MIB module manages Huawei WLAN system configurations and status, specifically enabling the monitoring and control of IPv6 service switching for associated stations via the hwWlanStaIpv6Switch table.
add table of hwWlanStaIpv6Switch,and notes for sta ipv6 service.
Main OID:
hwWlanSysManagement.1.3.6.1.4.1.2011.6.139.1
117
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
117 total| Object Name |
|---|
hwWlanSysManagementadd table of hwWlanStaIpv6Switch,and notes for sta ipv6 service. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.139.1 |
hwWlanTrapRestrain OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.1 |
hwWlanTrapRestrainAllAll wlan trap restrain switch. If this switch is enabled, all the traps on ac will not be sent.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.1.1 |
hwWlanTrapSeverityRestrain OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.1.2 |
hwWlanTrapSeverityRestrainSeverityWlan trap restrain by severity.
critical: means the trap whose severity is not higner than critical will not be sent.
major: means the trap whose severity is not higner than major will not be sent.
minor: means the trap whose severity is not higner than minor will not be sent.
warning: means the trap whose severity is not higner than warning will not be sent.
none: means all the severities of traps can be sent.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.1.2.1 |
hwWlanApRegionTrapRestrain OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.1.3 |
hwWlanApRegionTrapRestrainRegionIndexMaskWlan trap restrain by ap region.
Every bit is used to describe the region's trap will be restrained or not.
0 means not restrain, and 1 means restrain.
Each Byte describes 8 regions are restrained or not.
The value of this node is hexadecimal integer block.
For example, the first Byte describes region 0~7 is restrained or not,
and the second Byte describes region 8~15 is restrained or not.
Such as, if only region 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010,
the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1,
and the second Byte is 0x2.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.1.3.1 |
hwWlanApTrapRestrain OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.1.4 |
hwWlanApTrapRestrainApIndexMaskWlan trap restrain by ap.
Every bit is used to describe the ap's trap will be restrained or not.
0 means not restrain, and 1 means restrain.
Each Byte describes 8 aps are restrained or not.
The value of this node is hexadecimal integer block.
For example, the first Byte describes ap 0~7 is restrained or not,
and the second Byte describes ap 8~15 is restrained or not.
Such as, if only ap 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010,
the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1,
and the second Byte is 0x2.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.1.4.1 |
hwWlanSysPara OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.2 |
hwWlanCarrierIdThe carrier identification.
cmcc means 'China mobile communications corporation' ,
ctc means 'China telecom company' ,
cuc means 'China unicom company',
other means 'Other company',rw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.1 |
hwWlanAcIdThe ac identification.
The carrier must set ac id and carrier id before use.
In this case, APs can check each other whether blong to a same AC.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.2.2 |
hwWlanForwardModeAC forward mode.It can be set
ess(1): ess mode
ap(2): ap moderw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.3 |
hwWlanAcNEnumberDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.2.4 |
hwWlanAcAccessMaxApNumberDescription.ro Integer32 .1.3.6.1.4.1.2011.6.139.1.2.5 |
hwAcCountryCodeDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.2.6 |
hwWlanApUsernameDescription: When set, need to together with password, and the username length is 4 to 31 characters.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.2.8 |
hwWlanApPasswordDescription: When set, need to together with username, and the password length is 8 to 32 characters which must contain at least one capital letter,
one lowcase letter and one number.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.2.9 |
hwWlanUsernamePasswordApIdDescription: The node is useful only when get the username or password and must be set first and read with username or password.
When get the username or password without the node ,it means get the gloable configuration from AC, otherwise, it means
get the specified AP' username or password from AP. For when change the username or password,and not commit, the AC's
configuration is diffrent with AP' real configuration.
When specified the AP ID , and the AP is not in the normal state, return the username or password from AC's gloable configuration.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.2.10 |
hwWlanApLldpSwitchDescription: Global AP LLDP switch.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.11 |
hwWlanAcAccessMaxStaNumberDescription.ro Integer32 .1.3.6.1.4.1.2011.6.139.1.2.12 |
hwWlanAcDtlsSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.13 |
hwWlanAcDtlsPskDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.2.14 |
hwWlanApLogManualBackupApIdDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.2.15 |
hwWlanAcDtlsDefaultPskSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.16 |
hwWlanWorkModeDescription.ro Enumeration .1.3.6.1.4.1.2011.6.139.1.2.17 |
hwWlanIpv6EnableDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.18 |
hwWlanInterAcDtlsEncrpytDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.19 |
hwWlanInterAcDtlsPskDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.2.20 |
hwWlanStaIpv6SwitchWhether to process IPv6 services of STAs.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.2.21 |
hwWlanAcSourceInterface OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.3 |
hwWlanAcSourceInterfaceValuethe value of wlan ac source interface.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.3.1 |
hwWlanAcSourceInterfaceMethodoperation method of wlan ac source interface.It can be set
default(1): use default setting
vlanif(2): use vlanif interface
loopback(3): use loopback interface
ipaddress(4):user ip addressrw Enumeration .1.3.6.1.4.1.2011.6.139.1.3.2 |
hwWlanAcSourceIPv4AddressDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.3.3 |
hwWlanBatchQuery OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.4 |
hwWlanBatchQueryTypeData type of Batch query. For example, apProfName(1) can be used to get ap-profile-name list.
The batch query support two modes, the number mode and the ID list mode, binding the node hwWlanBatchRequestNum and
hwWlanBatchStartCount means use the number mode, binding the node hwWlanBatchRequestIdList, hwWlanBatchRequestIdSize
hwWlanBatchRequestIdNum means use the ID list mode.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.4.1 |
hwWlanBatchRequestNumThe request number of the batch query, it used in number mode. This node must be set in company with
the node hwWlanBatchStartCount. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery
to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node
hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names,
the result in hwWlanBatchValueList are ap-profile(3 5 6 9).rw Integer32 .1.3.6.1.4.1.2011.6.139.1.4.2 |
hwWlanBatchStartCountThe start count of the batch query, it used in number mode. This node must be set in company with
the node hwWlanBatchRequestNum. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery
to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node
hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names,
the result in hwWlanBatchValueList are ap-profile(3 5 6 9).rw Integer32 .1.3.6.1.4.1.2011.6.139.1.4.3 |
hwWlanBatchRequestIdListThe ID list of the data type, It used in ID list mode. This node must be set in company with
the node hwWlanBatchRequestIdSize and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC,
set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3),
set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList
and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.4.4 |
hwWlanBatchRequestIdSizeThe length of a batch query ID element, it used in ID list mode. This node must be set in company with
the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC,
set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3),
set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList
and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)rw Integer32 .1.3.6.1.4.1.2011.6.139.1.4.5 |
hwWlanBatchRequestIdNumThe number of batch query by id, it used in ID list mode. This node must be set in company with
the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdSize. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC,
set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3),
set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList
and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)rw Integer32 .1.3.6.1.4.1.2011.6.139.1.4.6 |
hwWlanBatchValueListThe returned value list. If the value ended by a string, each value is divided by '?', otherwise , each value
will have a fixed length. This node must be get in company with the node hwWlanBatchReturnNum.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.4.7 |
hwWlanBatchReturnNumThe number of successful query. This node must be get in company with the node hwWlanBatchValueList.ro Integer32 .1.3.6.1.4.1.2011.6.139.1.4.8 |
hwWlanBatchTotalNumTotal number of current batch query. For example, There are 10 ap-Profiles in the AC,
the value of this node will be 10.ro Integer32 .1.3.6.1.4.1.2011.6.139.1.4.9 |
hwWlanCapwapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.5 |
hwWlanCapwapKeepAliveIntervalThe interval of maintain freshness of the CAPWAP channel, in seconds.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.5.1 |
hwWlanCapwapKeepAliveTimesThe times of maintain freshness of the CAPWAP channel before it timeout.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.5.2 |
hwWlanCapwapControlPriorityACToAPthe ac's priority value of CAPWAP control packet,includ cos and tos,
ranging between 0 and 7.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.5.3 |
hwWlanCapwapControlPriorityAPToACthe ap's priority value of CAPWAP control packet,includ tos,
ranging between 0 and 7.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.5.4 |
hwWlanAcProtect OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.6 |
hwWlanAcProtectIpAddressIP address of the backup AC.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.6.1 |
hwWlanAcProtectPriorityDual-link hot backup priorities.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.1.6.2 |
hwWlanAcProtectSwitchDual-link hot backup switch.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.6.3 |
hwWlanAcProtectRestoreSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.6.4 |
hwUndoWlanAcProtectIpAddressDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.6.5 |
hwUndoWlanAcProtectPriorityDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.6.6 |
hwWlanAcProtectIpv6AddressDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.6.7 |
hwWlanConfigChannel OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.7 |
hwWlan24G20MconfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.1 |
hwWlan24G40MPlusConfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.2 |
hwWlan24G40MMinusConfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.3 |
hwWlan5G20MConfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.4 |
hwWlan5G40MPlusConfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.5 |
hwWlan5G40MMinusConfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.6 |
hwWlanConfigChannelApIdAp index, is used to identify AP uniquely.Query the configurable channel of the ap must contain apid otherwise query are global configurable channel.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.7.7 |
hwWlan24G80MConfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.8 |
hwWlan5G80MConfigChannelDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.1.7.9 |
hwWlanStaLoadbalance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.8 |
hwWlanStaLoadbalanceEnableDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.8.1 |
hwWlanStaLoadbalanceModeDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.8.2 |
hwWlanStaLoadbalanceSessionGapDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.8.3 |
hwWlanStaLoadbalanceTrafficGapDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.8.4 |
hwWlanStaLoadbalanceAssociateThresholdDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.8.5 |
hwWlanHsbConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.9 |
hwWlanHsbServiceTypeThe hsb service type can be one of the three values: 1, 2, 3 (1: disable(1) 2: hsbGroup(2) 3: hsbService(3)).
The default value of this node is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.9.1 |
hwWlanHsbGroupIdThe id of the hsb group used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.1.9.2 |
hwWlanHsbTunnelIdThe id of the hsb tunnel used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.1.9.3 |
hwWlanLocation OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.10 |
hwWlanLocationServerIPDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.10.1 |
hwWlanLocationServerPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.10.2 |
hwWlanLocationSourceIPDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.10.3 |
hwWlanLocationApReportToACDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.10.4 |
hwWlanLocationApReportToServerIpDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.10.5 |
hwWlanLocationApReportToUdpPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.10.6 |
hwWlanLocationApReportToIpv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.10.7 |
hwWlanLocationAcReportToIpv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.10.8 |
hwWlanSpectrumAnalysis OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.11 |
hwWlanSpectrumAnalysisServerIPDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.11.1 |
hwWlanSpectrumAnalysisServerPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.11.2 |
hwWlanNonWifiDeviceAgeTimeDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.11.3 |
hwWlanSpectrogramServerIPDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.11.4 |
hwWlanSpectrogramServerPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.11.5 |
hwWlanSpectrumAnalysisServerIPv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.11.6 |
hwWlanSpectrogramServerIPv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.11.7 |
hwWlanSysManagementObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.12 |
hwWlanLBSConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.12.1 |
hwWlanLBSAeServerPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.12.1.1 |
hwWlanLBSAeApReportModeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.12.1.2 |
hwWlanLBSAeApReportPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.12.1.3 |
hwWlanLBSEkServerIpDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.12.1.4 |
hwWlanLBSEkServerPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.12.1.5 |
hwWlanLBSEkApReportModeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.12.1.6 |
hwWlanLBSEkApReportIpDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.12.1.7 |
hwWlanLBSEkApReportPortDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.1.12.1.8 |
hwWlanLBSSourceIpDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.12.1.9 |
hwWlanLBSAeCompoundTimeCompound Time of AeroScout Tag Messagerw Integer32 .1.3.6.1.4.1.2011.6.139.1.12.1.10 |
hwWlanLBSEkServerIpv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.12.1.11 |
hwWlanLBSEkApReportIpv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.12.1.12 |
hwWlanLBSSourceIpv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.12.1.13 |
hwInterAcManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.13 |
hwMasterControllerSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.13.1 |
hwConnectMasterControllerSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.1.13.2 |
hwConnectMasterControllerIPv4AddressDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.1.13.3 |
hwConnectMasterControllerIPv6AddressDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.1.13.4 |
hwWlanSysManagementConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.14 |
hwWlanSysManagementCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.14.1 |
hwWlanSysManagementObjectGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.1.14.2 |