HUAWEI-WLAN-AC-MIB
The HUAWEI-WLAN-AC-MIB module enables SNMP-based monitoring and configuration of Huawei Wireless LAN Access Controllers, specifically tracking Access Point association states, radio interface statistics, client session counts, and controller resource utilization.
Imported Objects
Objects
28 total| Object Name |
|---|
hwWlanACManagementWlan AC management. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.139.100 |
hwWlanAcSourceBindBind the loopback number as ac source.rw Integer32 .1.3.6.1.4.1.2011.6.139.100.1 |
hwWlanTunnelAccessInterfaceBindTableBind the interface as the access interface when the access type is tunnle access. SEQUENCE OF HwWlanTunnelAccessInterfaceBindEntry .1.3.6.1.4.1.2011.6.139.100.2 |
hwWlanTunnelAccessInterfaceBindEntryThe entry of hwWlanTunnelAccessInterfaceBindTable. HwWlanTunnelAccessInterfaceBindEntry .1.3.6.1.4.1.2011.6.139.100.2.1 |
hwWlanTunnelAccessInterfaceIndexThe index of the tunnel access interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.6.139.100.2.1.1 |
hwWlanTunnelAccessSlotIdThe slot id of the board which receive the user packets. Integer32 .1.3.6.1.4.1.2011.6.139.100.2.1.2 |
hwWlanTunnelAccessInterfaceBindRawStatusThis table can be created and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.100.2.1.3 |
hwWlanRessembleBoardBindTableThe table which configrate wlan ressemble board bind table. SEQUENCE OF HwWlanRessembleBoardBindEntry .1.3.6.1.4.1.2011.6.139.100.3 |
hwWlanRessembleBoardBindEntryThe entry of hwWlanRessembleBoardBindTable. HwWlanRessembleBoardBindEntry .1.3.6.1.4.1.2011.6.139.100.3.1 |
hwWlanRessembleBoardBindSlotIdThe slot id of the board which will be bind as the ressemble board. Integer32 .1.3.6.1.4.1.2011.6.139.100.3.1.1 |
hwWlanRessembleBoardBindRawStatusThis table can be created and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.100.3.1.2 |
hwWlanAccessTypeEnableTableThe table configurate the wlan access type of the access interface. It can be used for ethernet interface/ethernet sub interface/trunk interface/trunk sub interface. SEQUENCE OF HwWlanAccessTypeEnableEntry .1.3.6.1.4.1.2011.6.139.100.4 |
hwWlanAccessTypeEnableEntryThe entry of hwWlanAccessTypeEnableTable. HwWlanAccessTypeEnableEntry .1.3.6.1.4.1.2011.6.139.100.4.1 |
hwWlanAccessIfIndexThe index of the wlan access interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.6.139.100.4.1.1 |
hwWlanDirectAccessEnableEnable the access type of the wlan access interface as direct access.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.6.139.100.4.1.2 |
hwWlanAccessInfoTableThe table of wlan ap access infomation. SEQUENCE OF HwWlanAccessInfoEntry .1.3.6.1.4.1.2011.6.139.100.5 |
hwWlanAccessInfoEntryThe entry of hwWlanAccessInfoTable. HwWlanAccessInfoEntry .1.3.6.1.4.1.2011.6.139.100.5.1 |
hwWlanAccessInfoApIndexThe index of ap device. Integer32 .1.3.6.1.4.1.2011.6.139.100.5.1.1 |
hwWlanAccessInfoApIPThe ip address of the ap device.ro IpAddress .1.3.6.1.4.1.2011.6.139.100.5.1.2 |
hwWlanAccessInfoApControlPortThe control port of the ap device.ro Integer32 .1.3.6.1.4.1.2011.6.139.100.5.1.3 |
hwWlanAccessInfoApDataPortThe data port of the ap device.ro Integer32 .1.3.6.1.4.1.2011.6.139.100.5.1.4 |
hwWlanAccessInfoAccessInterfaceNameThe access interface name of the ap device.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.100.5.1.5 |
hwWlanAccessInfoAccessTypeThe access type of the ap device.ro Integer32 .1.3.6.1.4.1.2011.6.139.100.5.1.6 |
hwWlanVeSubInterfaceWlanEnableTableWhen the wlan access type is tunnle access, the virtual ethernet sub interface must be configurated wlan enble to be used by the wlan user. SEQUENCE OF HwWlanVeSubInterfaceWlanEnableEntry .1.3.6.1.4.1.2011.6.139.100.6 |
hwWlanVeSubInterfaceWlanEnableEntryThe entry of hwWlanVeSubInterfaceWlanEnableTable. HwWlanVeSubInterfaceWlanEnableEntry .1.3.6.1.4.1.2011.6.139.100.6.1 |
hwWlanVeSubInterfaceIndexThe index of the WLAN virtual etherner interface which used for the wlan user access. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.6.139.100.6.1.1 |
hwWlanVeSubInterfaceWlanEnableEnable wlan.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.6.139.100.6.1.2 |
hwWlanAcManageGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.100.7 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.