HUAWEI-WAN-MIB
The HUAWEI-WAN-MIB provides vendor-specific management interfaces for monitoring Wide Area Network (WAN) interface states, link statistics, and protocol configurations on Huawei data communication devices. It enables the retrieval of operational metrics such as interface up/down status, packet throughput, error counters, and WAN-specific session parameters via SNMP.
Imported Objects
Objects
64 total| Object Name |
|---|
hwWANMIBThe private mib file includes the general extent
information of the device.hwDatacomm(241).hwWANMIB MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.241 |
hwWANMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.1 |
hwIB OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.1.1 |
hwIBTableIndicates the attribute of the IB interface formed by timeslots.
This table lists the physical attributes of the IB interface. SEQUENCE OF HwIBEntry .1.3.6.1.4.1.2011.5.25.241.1.1.1 |
hwIBEntryIndicates the attribute of the IB interface formed by timeslots.
This table lists the physical attributes of the IB interface. HwIBEntry .1.3.6.1.4.1.2011.5.25.241.1.1.1.1 |
hwIBMainIfIndexInterface index(es) of IB(s) present on the device . InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.1 |
hwIBStandbyIf1IB Standby Interface1.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.11 |
hwIBPri1IB Pri1.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.12 |
hwIBStandbyIf2IB Standby Interface2.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.13 |
hwIBPri2IB Pri2.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.14 |
hwIBStandbyIf3IB Standby Interface3.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.15 |
hwIBPri3IB Pri3.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.16 |
hwIBStandbyTypeIB Standby Type.ro Enumeration .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.17 |
hwIBStandbyBandWidthIB Standby BandWidth.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.18 |
hwIBEnableThresholdIB Enable Threshold.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.19 |
hwIBDisableThresholdIB Disable Threshold.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.20 |
hwIBActiveTimerIB Active Timer.ro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.21 |
hwIBInactiveTimerIB Inactive Timerro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.1.1.1.22 |
hw3G OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.1.2 |
hw3GTableIndicates the attribute of the 3G interface . SEQUENCE OF Hw3GEntry .1.3.6.1.4.1.2011.5.25.241.1.2.1 |
hw3GEntryIndicates the attribute of the 3G interface . Hw3GEntry .1.3.6.1.4.1.2011.5.25.241.1.2.1.1 |
hw3GIfIndex3G index(es) of port(s) present on the device . InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.1 |
hw3GModemStatusThe ModemState of 3G interface is used to test 3G whether online or notro Enumeration .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.11 |
hw3GDeviceNumberDevice Numberro OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.12 |
hw3GManufaceturerDevice Manufaceturerro OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.13 |
hw3GLicense3G Licensero OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.14 |
hw3GDeviceSerialNumber3G Device Serial Numberro OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.15 |
hw3GUIMStatusThe Status of 3G UIMro Enumeration .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.16 |
hw3GIMSI3G IMSIro OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.17 |
hw3GMV3G MVro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.18 |
hw3GOper3G Operro OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.19 |
hw3GCSQ3G Signal Intensityro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.20 |
hw3GAPNName3G APN Namero OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.21 |
hw3GNetworkConnectionType3G Network Connection Typero Enumeration .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.22 |
hw3GTotalConnectionTime3G Total Connection Timero Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.23 |
hw3GTxRate3G sent Ratero Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.24 |
hw3GRxRate3G Receive Ratero Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.25 |
hw3GBytesSent3G Bytes Sentro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.26 |
hw3GBytesReceived3G Bytes Receivedro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.27 |
hw3GBytesRateSent3G Sent Bytes Ratero Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.28 |
hw3GBytesRateReceived3G Receive Bytes Ratero Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.29 |
hw3GUpBand3G Up Bandro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.30 |
hw3GDownBand3G Down Bandro Integer32 .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.31 |
hw3GPacketSessionStatusPacket Session Statusro Enumeration .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.32 |
hw3GIccIdIntegrate Circuit Card Identityro OCTET STRING .1.3.6.1.4.1.2011.5.25.241.1.2.1.1.33 |
hwSPRMIBTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.2 |
hwSPRTrapOid OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.2.1 |
hwSPRLinkStateIndexLink Indexro Integer32 .1.3.6.1.4.1.2011.5.25.241.2.1.1 |
hwSPRLinkStateNameLink Namero OCTET STRING .1.3.6.1.4.1.2011.5.25.241.2.1.2 |
hwSPRLinkStateEligibilityLink State.0 is eligible;1 is not eligiblero Integer32 .1.3.6.1.4.1.2011.5.25.241.2.1.3 |
hwSPRTrapDefine OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.2.2 |
hwSPRTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.2.2.1 |
hwSPRLinkReport1 Notice/Trap name: Link not eligible
2 Notice/Trap generation cause: Link not eligible
3 Repair suggestions:
Check the links according to not eligible reasons. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.241.2.2.1.1 |
hwSPR OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.2.3 |
hwSPRServiceTableIndicates the attribute of the SPR service map. SEQUENCE OF HwSPRServiceEntry .1.3.6.1.4.1.2011.5.25.241.2.3.1 |
hwSPRServiceEntryIndicates the attribute of the SPR service map. HwSPRServiceEntry .1.3.6.1.4.1.2011.5.25.241.2.3.1.1 |
hwSPRServiceIndexService Indexro Integer32 .1.3.6.1.4.1.2011.5.25.241.2.3.1.1.1 |
hwSPRServiceNameService Namero OCTET STRING .1.3.6.1.4.1.2011.5.25.241.2.3.1.1.2 |
hwSPRServiceCurLinkNameService Current Link Namero OCTET STRING .1.3.6.1.4.1.2011.5.25.241.2.3.1.1.3 |
hwSPRTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.2.4 |
hwSPRServiceReportThe notification indicates that the current link of SPR service map was changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.241.2.4.1 |
hwWANConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.3 |
hwWANCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.3.1 |
hwWANGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.241.3.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.