HUAWEI-VRRP-EXT-MIB
AI MIB Summary
The HUAWEI-VRRP-EXT-MIB enables monitoring and management of Virtual Router Redundancy Protocol (VRRP) tracking states and associated interface or object dependencies on Huawei networking devices. It provides specific metrics for tracking object status changes that trigger VRRP priority adjustments, ensuring precise failover control in redundant network topologies.
It supplies for VRRP tracking function.
Main OID:
hwVrrpExt.1.3.6.1.4.1.2011.5.25.127
109
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
109 total| Object Name |
|---|
hwVrrpExtIt supplies for VRRP tracking function. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.127 |
hwVrrpExtGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.127.1 |
hwVrrpExtFreeArpIntervalThis object indicates the interval at which gratuitous ARP packets are sent. Zero means the gratuitous-arp sending function is disable.rw Integer32 (0|30..1200) UNITS "seconds" .1.3.6.1.4.1.2011.5.25.127.1.1 |
hwVrrpExtVIPPingCtrA switch decides whether the system responds to a request message or not,
which is sent to virtual ip address. The default value is enable.rw Enumeration .1.3.6.1.4.1.2011.5.25.127.1.2 |
hwVrrpExtSsTimerA switch decides whether the system enable VRRP SS function and set the size of VRRP SS timer or not,
which decide the VRRP packet advertisement interval during slave switchover. The default value is 100s.
But for the VRRP v3 version,this time value is truncated to 40950 milliseconds which is the maximum value according to the RFC 5798.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.1.3 |
hwVrrpExtLearnAdvIntervalFlagA switch decides whether the system learn VRRP packet advertisement interval or not,
which is sended from the master router in one virtual router standby. The default value is enable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.127.1.4 |
hwVrrpExtProtocolVersionCurrent protocol verison for VRRP on the specified device.The default value is v2(2) ,
and the other value for this element is v3(3).rw Enumeration .1.3.6.1.4.1.2011.5.25.127.1.5 |
hwVrrpExtSendV3AdverPktModeThis value specifies the mode of sending advertisement packet for VRRP v3.It has three
configurable value: VRRP_PROTO_V3_SEND_V2_ONLY(1), VRRP_PROTO_V3_SEND_V3_ONLY(2) and
VRRP_PROTO_V3_SEND_V3V2_BOTH(3).rw Enumeration .1.3.6.1.4.1.2011.5.25.127.1.6 |
hwVrrpExtStateChangeReasonStringReasons of VRRP state transition.
Used by hwVrrpExtTrapNonMaster, hwVrrpExtTrapMasterDown trap and vrrpTrapNewMaster trap.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.127.1.7 |
vrrpExtOperations OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.127.2 |
hwVrrpTrackInterTableThe VRRP tracking interface table, it can accomodate eight rows at most. SEQUENCE OF HWVrrpTrackInterEntry .1.3.6.1.4.1.2011.5.25.127.2.1 |
hwVrrpTrackInterEntryAn entry in the VRRP tracking interface table. HWVrrpTrackInterEntry .1.3.6.1.4.1.2011.5.25.127.2.1.1 |
hwVrrpTrackInterVRIDThe index of the VRRP tracking interface table, it identifies the standby's ID. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.1.1.1 |
hwVrrpTrackInterStandByIfnetThe index of the VRRP tracking interface table, it identifies the standby's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.1.1.2 |
hwVrrpTrackInterIfnetThe index of the VRRP tracking interface table, it identifies the tracked interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.1.1.3 |
hwVrrpTrackInterPriReduceIf the tracked interface is down, priority of standby will reduce this value. '0'
specifies this attribute hasn't been configured. The minimum availability value is '1'.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.1.1.4 |
hwVrrpTrackInterOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.1.1.5 |
hwVrrpTrackInterPriIncreaseIf the tracked interface is down, this value will be added to the priority of standby.
'0' specifies this attribute hasn't been configured. The minimum availability value is '1'.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.1.1.6 |
hwVrrpTrackBfdTableThe VRRP tracking BFD table, it can append eight rows at most. SEQUENCE OF HWVrrpTrackBfdEntry .1.3.6.1.4.1.2011.5.25.127.2.2 |
hwVrrpTrackBfdEntryAn entry in the VRRP tracking BFD table. HWVrrpTrackBfdEntry .1.3.6.1.4.1.2011.5.25.127.2.2.1 |
hwVrrpTrackBfdIdThe index of the table, it only identifies BFD link. Integer32 .1.3.6.1.4.1.2011.5.25.127.2.2.1.1 |
hwVrrpTrackBfdPriReduceIf the tracked BFD is down, the priority of standby will reduce this value.
'0' specifies this attribute hasn't been configured.
The minimum availability value is '1'.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.2.1.2 |
hwVrrpTrackBfdOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.2.1.3 |
hwVrrpTrackBfdPriIncreaseIf the tracked BFD is down, this value will be added to the priority of standby.
'0' specifies this attribute hasn't been configured.
The minimum availability value is '1'.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.2.1.4 |
hwVrrpTrackBfdTypeThe bfd type that vrrp tracks,including Normal, Link, Peer.
The attribute cannot be modified after created.rw Enumeration .1.3.6.1.4.1.2011.5.25.127.2.2.1.5 |
hwVrrpTrackBfdNameThe bfd name that vrrp tracks. The attribute cannot be modified after created.ro DisplayString .1.3.6.1.4.1.2011.5.25.127.2.2.1.6 |
hwAdminVrrpCfgTableThe admin-vrrp's configure table. SEQUENCE OF HWAdminVrrpCfgEntry .1.3.6.1.4.1.2011.5.25.127.2.3 |
hwAdminVrrpCfgEntryThe admin-vrrp's configure entry. HWAdminVrrpCfgEntry .1.3.6.1.4.1.2011.5.25.127.2.3.1 |
hwAdminVrrpCfgIfIndexThe admin-vrrp's configure interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.3.1.1 |
hwAdminVrrpCfgVRIDThe admin-vrrp's configure VRID. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.3.1.2 |
hwAdminVrrpCfgOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.3.1.3 |
hwAdminVrrpCfgIgnoreIfDownModeThe mode of ignore interface down.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.127.2.3.1.4 |
hwAdminVrrpMemberTableThe member-vrrp's configure table. SEQUENCE OF HWAdminVrrpMemberEntry .1.3.6.1.4.1.2011.5.25.127.2.4 |
hwAdminVrrpMemberEntryThe admin-vrrp's configure entry. HWAdminVrrpMemberEntry .1.3.6.1.4.1.2011.5.25.127.2.4.1 |
hwAdminVrrpMemberIfIndexThe admin-vrrp's member interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.4.1.1 |
hwAdminVrrpMemberVRIDThe admin-vrrp's member VRID. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.4.1.2 |
hwAdminVrrpMemberDiscardPktsThe admin-vrrp's member discarded packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.127.2.4.1.3 |
hwAdminVrrpMemberOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.4.1.4 |
hwAdminVrrpMemberFlowdownModeThe mode of flowdown interface.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.127.2.4.1.5 |
hwVrrpStatResetTableThe vrrp statistics reset Table. SEQUENCE OF HWVrrpStatResetEntry .1.3.6.1.4.1.2011.5.25.127.2.5 |
hwVrrpStatResetEntryThe vrrp statistics reset entry. HWVrrpStatResetEntry .1.3.6.1.4.1.2011.5.25.127.2.5.1 |
hwVrrpStatResetIfIndexThe vrrp's configure interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.5.1.1 |
hwVrrpStatResetVRIDThe vrrp vrid. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.5.1.2 |
hwVrrpStatResetFlagA reset signal of vrrp statistics.rw Enumeration .1.3.6.1.4.1.2011.5.25.127.2.5.1.3 |
hwAdminVrrpTrackIfTableThe interface bound to VRRP table. SEQUENCE OF HwAdminVrrpTrackIfEntry .1.3.6.1.4.1.2011.5.25.127.2.6 |
hwAdminVrrpTrackIfEntryEntries of the interface bound to VRRP table. HwAdminVrrpTrackIfEntry .1.3.6.1.4.1.2011.5.25.127.2.6.1 |
hwAdminVrrpTrackIfIndexThe number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.6.1.1 |
hwAdminVrrpIfIndexThe administrator VRRP's configure interface index.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.6.1.2 |
hwAdminVrrpVridThe administrator VRRP vrid.rw VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.6.1.3 |
hwAdminVrrpTrackIfRowStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.6.1.4 |
hwVrrpTrackEfmTableThe VRRP tracking EFM table. SEQUENCE OF HWVrrpTrackEfmEntry .1.3.6.1.4.1.2011.5.25.127.2.7 |
hwVrrpTrackEfmEntryAn entry in the VRRP tracking EFM table. HWVrrpTrackEfmEntry .1.3.6.1.4.1.2011.5.25.127.2.7.1 |
hwVrrpTrackEfmIfIndexThe index of the table, it identifies vrrp's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.7.1.1 |
hwVrrpTrackEfmIfNameA textual string containing information about the interface of vrrp.ro DisplayString .1.3.6.1.4.1.2011.5.25.127.2.7.1.2 |
hwVrrpTrackEfmVRIDThe index of the table, it identifies vrrp's vrid. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.7.1.3 |
hwVrrpTrackEfmIndexThe index of the table, it identifies EFM's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.7.1.4 |
hwVrrpTrackEfmNameA textual string containing information about the interface of efm.ro DisplayString .1.3.6.1.4.1.2011.5.25.127.2.7.1.5 |
hwVrrpTrackEfmOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.7.1.6 |
hwVrrpTriggerRouteTableThe VRRP trigger route table. SEQUENCE OF HWVrrpTriggerRouteEntry .1.3.6.1.4.1.2011.5.25.127.2.8 |
hwVrrpTriggerRouteEntryAn entry in the VRRP trigger route table. HWVrrpTriggerRouteEntry .1.3.6.1.4.1.2011.5.25.127.2.8.1 |
hwVrrpTriggerRouteIfIndexThe index of the table, it identifies vrrp's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.8.1.1 |
hwVrrpTriggerRouteModeA switch decides whether the system responds to a request message or not,
which is sent to virtual ip address.rw Enumeration .1.3.6.1.4.1.2011.5.25.127.2.8.1.2 |
hwVrrpTriggerRouteOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.8.1.51 |
hwVrrpCfgTableThe VRRP configure table. SEQUENCE OF HWVrrpCfgEntry .1.3.6.1.4.1.2011.5.25.127.2.9 |
hwVrrpCfgEntryAn entry in the VRRP configure route table. HWVrrpCfgEntry .1.3.6.1.4.1.2011.5.25.127.2.9.1 |
hwVrrpCfgIfIndexThe index of the table, it identifies vrrp's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.9.1.1 |
hwVrrpCfgVrIdThe vrrp vrid. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.9.1.2 |
hwVrrpCfgLinkBfdDownNumberThe state of link BFD will really down when reach the configured down number.
Enter '0' to delete this configuration.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.9.1.3 |
hwVrrpCfgMsecAdvIntervalThe value of VRRP advertise interval in milliseconds, when the interval is less than 1 second,
otherwise it should be set or got in VRRP-MIB.
when the advertise interval is equal to or larger than 1 second, this value will be 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.9.1.4 |
hwVrrpCfgFastResumeFlagA switch indicates whether the VRRP fast-resume function is enabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.127.2.9.1.50 |
hwVrrpCfgOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.9.1.51 |
hwVrrpStatExtTableThe VRRP statistics extend table. SEQUENCE OF HWVrrpStatExtEntry .1.3.6.1.4.1.2011.5.25.127.2.10 |
hwVrrpStatExtEntryAn entry in The VRRP statistics extend table. HWVrrpStatExtEntry .1.3.6.1.4.1.2011.5.25.127.2.10.1 |
hwVrrpStatExtIfIndexThe index of the table, it identifies vrrp's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.10.1.1 |
hwVrrpStatExtVRIDThe vrrp vrid. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.10.1.2 |
hwVrrpStatExtBecomeBackupThe total number of times that this virtual router's state
has transitioned to BACKUP.ro Counter32 .1.3.6.1.4.1.2011.5.25.127.2.10.1.3 |
hwVrrpStatExtBecomeInitThe total number of times that this virtual router's state
has transitioned to INITIALIZE.ro Counter32 .1.3.6.1.4.1.2011.5.25.127.2.10.1.4 |
hwVrrpStatExtCreateTimeThe create time of vrrp.ro DisplayString .1.3.6.1.4.1.2011.5.25.127.2.10.1.5 |
hwVrrpStatExtLastChangeTimeThe last change time of vrrp.ro DisplayString .1.3.6.1.4.1.2011.5.25.127.2.10.1.6 |
hwVrrpTrackIpsecInstanceTableThis object indicates the VRRP tracking Ipsec-instance table, which can accommodate a maximum of eight rows. SEQUENCE OF HWVrrpTrackIpsecInstanceEntry .1.3.6.1.4.1.2011.5.25.127.2.11 |
hwVrrpTrackIpsecInstanceEntryThis object indicates an entry in the VRRP tracking Ipsec-instance table. HWVrrpTrackIpsecInstanceEntry .1.3.6.1.4.1.2011.5.25.127.2.11.1 |
hwVrrpTrackIpsecInstanceVRIDThe value of this object identifies the ID of a backup device in the VRRP tracking Ipsec-instance table. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.11.1.1 |
hwVrrpTrackIpsecInstanceStandByIfnetThe value of this object identifies the interface index of a backup device in the VRRP tracking Ipsec-instance table. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.11.1.2 |
hwVrrpTrackIpsecInstanceIDThe value of this object identifies the ID of a tracked Ipsec-instance in the VRRP tracking Ipsec-instance table. Integer32 .1.3.6.1.4.1.2011.5.25.127.2.11.1.3 |
hwVrrpTrackIpsecInstancePriReduceIf the tracked Ipsec-instance is Down, priorities of backup devices decrease by the specified value.
The value 0 indicates that the attribute is not configured. The minimum value is 1.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.11.1.4 |
hwVrrpTrackIpsecInstanceOperRowStatusThis object indicates the row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.11.1.5 |
hwVrrpTrackNQATableThe VRRP tracking NQA table. SEQUENCE OF HWVrrpTrackNQAEntry .1.3.6.1.4.1.2011.5.25.127.2.12 |
hwVrrpTrackNQAEntryAn entry in the VRRP tracking NQA table. HWVrrpTrackNQAEntry .1.3.6.1.4.1.2011.5.25.127.2.12.1 |
hwVrrpTrackNQAVRIDThe value of this object identifies the ID of a backup device in the VRRP tracking NQA table. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.12.1.1 |
hwVrrpTrackNQAStandbyIfIndexThe value of this object identifies the interface index of a backup device in the VRRP tracking NQA table. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.12.1.2 |
hwVrrpTrackNQAAdminNameThe NQA administer name that vrrp tracks. The attribute cannot be modified after created. DisplayString .1.3.6.1.4.1.2011.5.25.127.2.12.1.3 |
hwVrrpTrackNQATestNameThe NQA test name that vrrp tracks. The attribute cannot be modified after created. DisplayString .1.3.6.1.4.1.2011.5.25.127.2.12.1.4 |
hwVrrpTrackNQAPriReduceIf the tracked NQA is down, the priority of standby will reduce this value.
'0' specifies this attribute hasn't been configured.
The minimum availability value is '1'.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.12.1.5 |
hwVrrpTrackNQAOperRowStatusThis object indicates the row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.12.1.6 |
hwVrrpTrackRouteTableThe VRRP tracking Route table. SEQUENCE OF HWVrrpTrackRouteEntry .1.3.6.1.4.1.2011.5.25.127.2.13 |
hwVrrpTrackRouteEntryAn entry in the VRRP tracking Route table. HWVrrpTrackRouteEntry .1.3.6.1.4.1.2011.5.25.127.2.13.1 |
hwVrrpTrackRouteVRIDThe index of the VRRP tracking Route table, it identifies the standby's ID. VrId (VRRP-MIB) .1.3.6.1.4.1.2011.5.25.127.2.13.1.1 |
hwVrrpTrackRouteIndexThe index of the VRRP tracking Route table, it identifies the standby's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.127.2.13.1.2 |
hwVrrpTrackRoutePrefixThe index of the VRRP tracking Route table, it identifies the tracked ip address. IpAddress .1.3.6.1.4.1.2011.5.25.127.2.13.1.3 |
hwVrrpTrackRouteMaskThe index of the VRRP tracking Route table, it identifies the tracked ip address's mask. IpAddress .1.3.6.1.4.1.2011.5.25.127.2.13.1.4 |
hwVrrpTrackRouteVrfThe index of the VRRP tracking Route table, it identifies the tracked VPN instance name DisplayString .1.3.6.1.4.1.2011.5.25.127.2.13.1.5 |
hwVrrpTrackRoutePriReduceIf the tracked route is unreachable, the priority of standby will reduce this value.
'0' specifies this attribute hasn't been configured.
The minimum availability value is '1'.rw Integer32 .1.3.6.1.4.1.2011.5.25.127.2.13.1.6 |
hwVrrpTrackRouteOperRowStatusThe row status variable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.127.2.13.1.7 |
hwVrrpExtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.127.2.30 |
hwVrrpExtTrapMasterDownThe MasterDown trap indicates that the state of vrrp
has transitioned from 'Master' to other state. The other state
can be noactive(0), initialize(1) and backup(2). NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.127.2.30.1 |
hwVrrpExtTrapNonMasterThe NonMaster trap indicates that the state of vrrp
has transitioned between Backup and Initialize state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.127.2.30.2 |
vrrpExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.127.3 |
hwvrrpExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.127.3.1 |
hwvrrpExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.127.3.1.1 |