HUAWEI-VPRING-MIB
AI MIB Summary
The HUAWEI-VPRING-MIB module facilitates the monitoring and management of Virtual Private Ring (VPRING) configurations and status on Huawei ATM network equipment. It exposes specific metrics for ATM virtual path ring interfaces, including operational states, traffic counters, and ring topology parameters to support fault detection and performance analysis.
huawei ATM VPRING MIb
Main OID:
hwVPRing.1.3.6.1.4.1.2011.6.20
68
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
hwVPRinghuawei ATM VPRING MIb MODULE-IDENTITY .1.3.6.1.4.1.2011.6.20 |
HUAWEI-MIBhuawei ATM VPRING MIb Unknown .1.3.6.1.4.1.2011.6.20 |
hwAtmApsVpRingTableVPñ SEQUENCE OF HwAtmApsVpRingEntry .1.3.6.1.4.1.2011.6.20.1 |
hwAtmApsVpRingEntryVPñʵ HwAtmApsVpRingEntry .1.3.6.1.4.1.2011.6.20.1.1 |
hwAtmApsVpRingIndexVP INTEGER .1.3.6.1.4.1.2011.6.20.1.1.1 |
hwAtmApsVpRingPositionýڵVPϵλñrw INTEGER .1.3.6.1.4.1.2011.6.20.1.1.2 |
hwAtmApsVpRingFrameID11rw INTEGER .1.3.6.1.4.1.2011.6.20.1.1.3 |
hwAtmApsVpRingSlotID1ۺ1rw INTEGER .1.3.6.1.4.1.2011.6.20.1.1.4 |
hwAtmApsVpRingPortID1˿ں1rw INTEGER .1.3.6.1.4.1.2011.6.20.1.1.5 |
hwAtmApsVpRingFrameID22rw INTEGER .1.3.6.1.4.1.2011.6.20.1.1.6 |
hwAtmApsVpRingSlotID2ۺ2rw INTEGER .1.3.6.1.4.1.2011.6.20.1.1.7 |
hwAtmApsVpRingPortID2˿ں2rw INTEGER .1.3.6.1.4.1.2011.6.20.1.1.8 |
hwAtmApsVpRingRowStatus״̬rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.20.1.1.9 |
hwAtmApsVPGConfigTableVPGñ SEQUENCE OF HwAtmApsVPGConfigEntry .1.3.6.1.4.1.2011.6.20.2 |
hwAtmApsVPGConfigEntryVPGñʵ HwAtmApsVPGConfigEntry .1.3.6.1.4.1.2011.6.20.2.1 |
hwAtmApsVPGIndexVPGro INTEGER .1.3.6.1.4.1.2011.6.20.2.1.1 |
hwAtmApsVPGNameVPGƣΪ52ֽrw DisplayString .1.3.6.1.4.1.2011.6.20.2.1.2 |
hwAtmApsVPGWorkingFrameIDʵrw INTEGER .1.3.6.1.4.1.2011.6.20.2.1.3 |
hwAtmApsVPGWorkingSlotIDʵۺrw INTEGER .1.3.6.1.4.1.2011.6.20.2.1.4 |
hwAtmApsVPGWorkingPhyportIDʵ˿ںrw INTEGER .1.3.6.1.4.1.2011.6.20.2.1.5 |
hwAtmApsVPGProtectionFrameIDʵrw INTEGER .1.3.6.1.4.1.2011.6.20.2.1.6 |
hwAtmApsVPGProtectionSlotIDʵۺrw INTEGER .1.3.6.1.4.1.2011.6.20.2.1.7 |
hwAtmApsVPGProtectionPhyportIDʵ˿ںrw INTEGER .1.3.6.1.4.1.2011.6.20.2.1.8 |
hwAtmApsVPGModeģʽΪѡĬΪ11Ϊ11˫rw Enumeration .1.3.6.1.4.1.2011.6.20.2.1.9 |
hwAtmApsVPGWTRTimeVPGȴָʱ䣬λΪӣȱʡ12ӣ
ûԸҪָΧΪ130rw INTEGER .1.3.6.1.4.1.2011.6.20.2.1.10 |
hwAtmApsVPGExternalCommandsⲿͣøΪǶԸVPGжӦIJrw Enumeration .1.3.6.1.4.1.2011.6.20.2.1.11 |
hwAtmApsVPGProtectK1K2RcvKֽڣʾԶ˵
ԼԶ˵Žѡ״̬,ĬΪֵΪ0x0010ro INTEGER .1.3.6.1.4.1.2011.6.20.2.1.12 |
hwAtmApsVPGProtectK1K2TransKֽڣʾе
ԼصŽѡ״̬,ĬΪֵΪ0x0010ro INTEGER .1.3.6.1.4.1.2011.6.20.2.1.13 |
hwAtmApsVPGWorkingEntityStatusʾʵĸ澯״̬ÿһλһָ澯
Ϊ1Ϊ澯ڣΪ0ʾ澯ڣ
ֵΪ0˵ʵĬʵ
0x00000002-RSD
0x00000004-AIS,
0x00000008-RDI,
0x00000010-SD,
0x00000020-LOS,
0x00000040-LOFro Bits .1.3.6.1.4.1.2011.6.20.2.1.14 |
hwAtmApsVPGProtectionEntityStatusʾʵĸ澯״̬ÿһλһָ澯
Ϊ1Ϊ澯ڣΪ0ʾ澯ڣ
ֵΪ0˵ʵĬʵ
0x00000002-RSD
0x00000004-AIS,
0x00000008-RDI,
0x00000010-SD,
0x00000020-LOS,
0x00000040-LOFro Bits .1.3.6.1.4.1.2011.6.20.2.1.15 |
hwAtmApsVPGCurrEntityʾVPGҵǰʵ壬ȱʡΪʵro Enumeration .1.3.6.1.4.1.2011.6.20.2.1.16 |
hwAtmApsVPGApsStatus¼VPGıظ澯˫ģʽ²һʹ<24..31>λ˫ʹ<7..23>λ
Bidirectional APSC:
0x00000080-DNR,
0x00000100-rsv1,
0x00000200-WTR,
0x00000400-rsv2,
0x00000800-MS-W,
0x00001000-MS-P,
0x00002000-rsv3,
0x00004000-SD-W,
0x00008000-SD-P,
0x00010000-rsv4,
0x00020000-SF-W,
0x00040000-rsv5,
0x00080000-FS-W,
0x00100000-SF-P,
0x00200000-LOP,
0x00400000-FREEZE,
0x00800000-CLEAR,
Unidirectional APSC:
0x01000000-WTR,
0x02000000-MS_P,
0x04000000-MS_W,
0x08000000-SD,
0x10000000-SF,
0x20000000-FS,
0x40000000-LOP,
0x80000000-CLEARro INTEGER .1.3.6.1.4.1.2011.6.20.2.1.17 |
hwAtmApsVPGVplIsInUseVPGıʹܱʾΪ2ʾûʹܣΪ1ʾʹܣ
Ϊ1Ϊǽʹܲ
enable(1),
disable(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.20.2.1.18 |
hwAtmApsVPGVpRingIndexVPGڵVPro INTEGER .1.3.6.1.4.1.2011.6.20.2.1.19 |
hwAtmApsVPGRevertiveɻָ־Ϊ1ɻָΪ2ɻָȱʡֵ2
revertible(1),
non-revertible(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.20.2.1.20 |
hwAtmApsVPGRowStatus״̬rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.20.2.1.21 |
hwAtmApsVPGVplTableVPñ SEQUENCE OF HwAtmApsVPGVplEntry .1.3.6.1.4.1.2011.6.20.3 |
hwAtmApsVPGVplEntryVPñʵ HwAtmApsVPGVplEntry .1.3.6.1.4.1.2011.6.20.3.1 |
hwAtmApsVPGVplWorkingVpiͨʶ INTEGER .1.3.6.1.4.1.2011.6.20.3.1.1 |
hwAtmApsVPGVplProtectionVpiͨʶrw INTEGER .1.3.6.1.4.1.2011.6.20.3.1.2 |
hwAtmApsVPGVplServiceClassҵȼrwdeprecated Enumeration .1.3.6.1.4.1.2011.6.20.3.1.3 |
hwAtmApsVPGVplRowStaus״̬rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.20.3.1.4 |
hwAtmApsVPGVplTrafficTableIndexrw INTEGER .1.3.6.1.4.1.2011.6.20.3.1.5 |
hwAtmApsAPSChannelTableVPñ SEQUENCE OF HwAtmApsAPSChannelEntry .1.3.6.1.4.1.2011.6.20.4 |
hwAtmApsAPSChannelEntryVPñʵ HwAtmApsAPSChannelEntry .1.3.6.1.4.1.2011.6.20.4.1 |
hwAtmApsAPSChannelFrameID INTEGER .1.3.6.1.4.1.2011.6.20.4.1.1 |
hwAtmApsAPSChannelSlotIDۺ INTEGER .1.3.6.1.4.1.2011.6.20.4.1.2 |
hwAtmApsAPSChannelPhyport˿ں INTEGER .1.3.6.1.4.1.2011.6.20.4.1.3 |
hwAtmApsAPSChannelVpiͨʶ INTEGER .1.3.6.1.4.1.2011.6.20.4.1.4 |
hwAtmApsAPSChannelGroupIndexAPS CHANNELڵVPGrw INTEGER .1.3.6.1.4.1.2011.6.20.4.1.5 |
hwAtmApsAPSChannelVlTypeVLͣP2P,W_LEAF,P_LEAF֣P2Pʾмڵ
ڵCHANNEL,W_LEAFʾҵ»㴦Ĺʵ
CHANNEL,P_LEAFʾӦıCHANNELrw Enumeration .1.3.6.1.4.1.2011.6.20.4.1.6 |
hwAtmApsAPSChannelRowStaus״̬rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.20.4.1.7 |
hwVPRingSnmpTrapDef OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.20.5 |
hwAtmApsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.20.5.0 |
hwAtmApsVPGStatusTrapsvp group dynamic status trap:
1:hwAtmApsVPGIndex,
2:hwAtmApsVPGProtectK1K2Rcv,
3:hwAtmApsVPGProtectK1K2Trans,
4:hwAtmApsVPGWorkingEntityStatus,
5:hwAtmApsVPGProtectionEntityStatus,
6:hwAtmApsVPGCurrEntity,
7:hwAtmApsVPGApsStatus
VP鶯̬ҪҶ:
1:VP,
2:Kֽ,
3:Kֽ,
4:ʵ澯״̬,
5:ʵ澯״̬,
6:ѡ״̬,
7:VP״̬ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.20.5.0.1 |
hwAtmApsVPGProtectionSwitchingalarm description:VP Channel Protection Switching
explain
1.Loss of signal,
2.Deterioration of signal,
3.User operation,
4.Remote request causes switchover
resolving method:
1.Check if the transmission optical fiber is broken,
2.Check if the transmission line quality is deteriorated,
3.If it is the above 3/4 reason,no need to proceed.
澯VPͨ
澯ԭ
1.źŶʧ
2.źӻ
3.û·
4.Զ˽ڵ㷢
飺
1.鴫·Ƿж
2.鴫·Ƿӻ
3.34ԭ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.20.5.0.2 |
hwAtmApsVPGProtectionSwitchingFailalarm description:VP Channel Protection Switching fails
explain
1.Command execution time out,
2.VP group status abnormal caused by insufficient synchronization of active and standby boards
resolving method:
1.Check if the interface board works normally,
2.There is no need to proceed. The VPRING data will be recovered within three minutes
澯VPͨʧ
澯ԭ
1.ִгʱ
2.ͬVP״̬쳣
飺
1.ӿڰ״̬Ƿ
2.账ȴ3ӺVPRINGݻԶָ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.20.5.0.3 |
hwAtmApsVPGProtectionSwitchingClearalarm description:VP Channel Protection Switching is cleared
explain
1.The local/remote working channel is recovered, or there is no switchover request at present,
2.Remote request causes switchover
resolving method:
1.No need to proceed
澯VPͨʧ
澯ԭ
1./Զ˹ָͨߵǰѾ
2.Զ
飺
1.账 NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.20.5.0.4 |
hwAtmApsVPGProtectionSwitchingClearFailalarm description:fail to clear VP Channel Protection Switching
explain
1.Command execution time out,
2.VP group status abnormal caused by insufficient synchronization of active and standby boards
resolving method:
1.Check if the interface board works normally,
2.There is no need to proceed. The VPRING data will be recovered within three minutes
澯VPͨʧ
澯ԭ
1.ִгʱ
2.ͬVP״̬쳣
飺
1.ӿڰ״̬Ƿ
2.账ȴ3ӺVPRINGݻԶָ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.20.5.0.5 |
hwAtmApsVPGKByteMismatchalarm description:The received K2 byte are not the same as transmitted one
explain
1.Local and remote switchover status inconsistent,
2.Current status of the local protection switchover is frozen
resolving method:
1.No need to proceed,
2.Disable the freezing of current status of the local protection switchover
澯յK2ֽ뷢͵K2ֽڲһ
澯ԭ
1.Զ˵״̬һ
2.ضᵹ
飺
1.账
2.ȡᵹ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.20.5.0.6 |
hwAtmApsVPGStartPSFailalarm description:fail to Start protection switching
explain
1.Command execution time out
resolving method:
1.Check if the interface board works normally
澯ʧ
澯ԭ
1.ִгʱ
飺
1.ӿڰ״̬Ƿ NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.20.5.0.7 |
hwAtmApsAlmBindReason OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.20.5.2 |
hwAtmApsVPGProtectionSwitchingReasonalarm description:VP Channel Protection Switching
explain
1.Loss of signal,
2.Deterioration of signal,
3.User operation,
4.Remote request causes switchover
resolving method:
1.Check if the transmission optical fiber is broken,
2.Check if the transmission line quality is deteriorated,
3.If it is the above 3/4 reason,no need to proceed.
澯VPͨ
澯ԭ
1.źŶʧ
2.źӻ
3.û·
4.Զ˽ڵ㷢
飺
1.鴫·Ƿж
2.鴫·Ƿӻ
3.34ԭro Enumeration .1.3.6.1.4.1.2011.6.20.5.2.1 |
hwAtmApsVPGProtectionSwitchingFailReasonalarm description:VP Channel Protection Switching fails
explain
1.Command execution time out,
2.VP group status abnormal caused by insufficient synchronization of active and standby boards
resolving method:
1.Check if the interface board works normally,
2.There is no need to proceed. The VPRING data will be recovered within three minutes
澯VPͨʧ
澯ԭ
1.ִгʱ
2.ͬVP״̬쳣
飺
1.ӿڰ״̬Ƿ
2.账ȴ3ӺVPRINGݻԶָro Enumeration .1.3.6.1.4.1.2011.6.20.5.2.2 |
hwAtmApsVPGProtectionSwitchingClearReasonalarm description:VP Channel Protection Switching is cleared
explain
1.The local/remote working channel is recovered, or there is no switchover request at present,
2.Remote request causes switchover
resolving method:
1.No need to proceed
澯VPͨʧ
澯ԭ
1./Զ˹ָͨߵǰѾ
2.Զ
飺
1.账ro Enumeration .1.3.6.1.4.1.2011.6.20.5.2.3 |
hwAtmApsVPGProtectionSwitchingClearFailReasonalarm description:fail to clear VP Channel Protection Switching
explain
1.Command execution time out,
2.VP group status abnormal caused by insufficient synchronization of active and standby boards
resolving method:
1.Check if the interface board works normally,
2.There is no need to proceed. The VPRING data will be recovered within three minutes
澯VPͨʧ
澯ԭ
1.ִгʱ
2.ͬVP״̬쳣
飺
1.ӿڰ״̬Ƿ
2.账ȴ3ӺVPRINGݻԶָro Enumeration .1.3.6.1.4.1.2011.6.20.5.2.4 |
hwAtmApsVPGKByteMismatchReasonalarm description:The received K2 byte are not the same as transmitted one
explain
1.Local and remote switchover status inconsistent,
2.Current status of the local protection switchover is frozen
resolving method:
1.No need to proceed,
2.Disable the freezing of current status of the local protection switchover
澯յK2ֽ뷢͵K2ֽڲһ
澯ԭ
1.Զ˵״̬һ
2.ضᵹ
飺
1.账
2.ȡᵹro Enumeration .1.3.6.1.4.1.2011.6.20.5.2.5 |
hwAtmApsVPGStartPSFailReasonalarm description:fail to Start protection switching
explain
1.Command execution time out
resolving method:
1.Check if the interface board works normally
澯ʧ
澯ԭ
1.ִгʱ
飺
1.ӿڰ״̬Ƿro Enumeration .1.3.6.1.4.1.2011.6.20.5.2.6 |
More MIBs from Huawei
Browse all HuaweiMIBs →HUAWEI-MIB
The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
3074 objects→
HUAWEI-SERVER-IBMC-MIB
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
2171 objects→
HUAWEI-XPON-MIB
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
1553 objects→
H3C-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1462 objects→
HUAWEI-WLAN-CONFIGURATION-MIB
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
1280 objects→
HUAWEI-XQoS-MIB
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.
1134 objects→