HUAWEI-VPN-DIAGNOSTICS-MIB
AI MIB Summary
The HUAWEI-VPN-DIAGNOSTICS-MIB enables SNMP-based monitoring of service quality detection metrics and diagnostic status for Huawei VPN services. This module provides visibility into VPN tunnel health, connectivity test results, and service performance counters to facilitate proactive fault isolation.
HUAWEI service quality detect funcion.
Main OID:
vpndiagnostics.1.3.6.1.4.1.2011.5.25.172
85
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
85 total| Object Name |
|---|
vpndiagnosticsHUAWEI service quality detect funcion. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.172 |
macoper OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.1 |
populateBase OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.1.1 |
hwOamMacPopulateCountReceived populate packets in current device.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.1.1.1 |
hwOamMacPurgeCountReceived purge packets in current device.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.1.1.2 |
hwOamMacPurgeRegCountReceived purge(register) packets in current device.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.1.1.3 |
hwOamMacCountResetReset the count of hwOamMacPopulateCount and hwOamMacPurgeCount, the value 1
means reset hwOamMacPopulateCount,the value is 2 means reset hwOamMacPurgeCount,
the value is 3 means reset hwOamMacPurgeRegCount ,the value is 4 means reset hwOamMacPopulateCount and hwOamMacPurgeCount,hwOamMacPurgeRegCount , When read, it always returns value 4.rw Enumeration .1.3.6.1.4.1.2011.5.25.172.1.1.4 |
hwOamMacSwitchIndicates the switch of enabling MAC populate,if the value is 1, enable; if the value is 2, disable.rw Enumeration .1.3.6.1.4.1.2011.5.25.172.1.1.5 |
hwOamMacEntryNumThe entry number of hwOamMacDisplayTable.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.1.1.6 |
hwOamMacOperTableA table which to be populate or purge operation. SEQUENCE OF HwOamMacOperEntry .1.3.6.1.4.1.2011.5.25.172.1.2 |
hwOamMacOperEntryEntries of hwOamMacOperTable. HwOamMacOperEntry .1.3.6.1.4.1.2011.5.25.172.1.2.1 |
hwOamMacOperIndexThe index of hwOamMacOperIndex,it is always 1. Integer32 (1) .1.3.6.1.4.1.2011.5.25.172.1.2.1.1 |
hwOamMacOperAddressThe MAC that to be populated or purged.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.1.2.1.2 |
hwOamMacOperVsiNameThe name or other identifier referring to the VSI
which is correlative to the hwOamMac.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.172.1.2.1.3 |
hwOamMacOperTypeThe operate type,1 means populate,2 means purge.rw MacOpType .1.3.6.1.4.1.2011.5.25.172.1.2.1.4 |
hwOamMacOperRegisterwhile purge a OAM MAC,register it to be a reserved MAC .
1 means register, 2 means not register. Defaut is 2.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.172.1.2.1.5 |
hwOamMacOperFloodBroadcast the packet or not. 1 means broadcast, 2 means don`t broadcast.Defaut is 2.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.172.1.2.1.6 |
hwOamMacOperNumThe number of packets which want to be sent.rw Integer32 .1.3.6.1.4.1.2011.5.25.172.1.2.1.7 |
hwOamMacOperRowStatusThe operating state of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.1.2.1.8 |
hwOamMacListTableA table which displays the OAM MAC applied at huawei. SEQUENCE OF HwOamMacListEntry .1.3.6.1.4.1.2011.5.25.172.1.3 |
hwOamMacListEntryDisplay the OAM MAC applied at huawei. HwOamMacListEntry .1.3.6.1.4.1.2011.5.25.172.1.3.1 |
hwOamMacListIndexThe index of hwOamMacListIndex. Integer32 .1.3.6.1.4.1.2011.5.25.172.1.3.1.1 |
hwOamMacListAddressThe OAM MAC applied at huawei.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.1.3.1.2 |
hwOamMacDisplayTableA table which displays the result of populate or purge operation. SEQUENCE OF HwOamMacDisplayEntry .1.3.6.1.4.1.2011.5.25.172.1.4 |
hwOamMacDisplayEntryEntries of hwOamMacDisplayTable. HwOamMacDisplayEntry .1.3.6.1.4.1.2011.5.25.172.1.4.1 |
hwOamMacDisplayIndexThe index of hwOamMacDisplayEntry, the value range is from 1 to 100. Integer32 .1.3.6.1.4.1.2011.5.25.172.1.4.1.1 |
hwOamMacDisplayAddressThe OAM MAC that had been populated or purged.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.1.4.1.2 |
hwOamMacDisplayTypeThe OAM MAC type, 1 means populate, 2 means purge.ro MacOpType .1.3.6.1.4.1.2011.5.25.172.1.4.1.3 |
hwOamMacDisplayVsiNameThe name or other identifier referring to the VSI
which is correlative to the hwOamMac.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.172.1.4.1.4 |
hwOamMacDisplayAgeTimeThe age time of the entry.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.1.4.1.5 |
hwOamMacDisplayLsrIdThe LSR-ID of the sender.ro IpAddress .1.3.6.1.4.1.2011.5.25.172.1.4.1.6 |
macoperConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.1.5 |
hwOamMacGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.1.5.1 |
macoperCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.1.5.2 |
hwVpnCfgPing OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.2 |
hwVpnCfgPingTablehwVpnCfgPingTable. SEQUENCE OF HwVpnCfgPingEntry .1.3.6.1.4.1.2011.5.25.172.2.1 |
hwVpnCfgPingEntryThis object indicates that the index of this table is hwVpnCfgPingIndex. HwVpnCfgPingEntry .1.3.6.1.4.1.2011.5.25.172.2.1.1 |
hwVpnCfgPingIndexThis object indicates the index of an operation instance. Integer32 .1.3.6.1.4.1.2011.5.25.172.2.1.1.1 |
hwVpnCfgPingPeerIpTypeThis object indicates the type of the peer IP address. It is used to identify the value type of hwVpnCfgPingPeerIp, which can be IPv4 or IPv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.172.2.1.1.2 |
hwVpnCfgPingPeerIpThis object indicates the peer IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.172.2.1.1.3 |
hwVpnCfgPingVpnIdTypeThis object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.rw Enumeration .1.3.6.1.4.1.2011.5.25.172.2.1.1.4 |
hwVpnCfgPingVpnIdThis object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.172.2.1.1.5 |
hwVpnCfgPingPwIdThis object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.172.2.1.1.6 |
hwVpnCfgPingTunnelUsedThis object indicates the mode of forwarding request packets or response packets (such as tunnel forwarding).rw Enumeration .1.3.6.1.4.1.2011.5.25.172.2.1.1.7 |
hwVpnCfgPingOperationThis object indicates two values: enable(1) and disable(2). enable(1) indicates that the operation instance is started; disable(2) indicates that the operation instance is stopped.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.172.2.1.1.8 |
hwVpnCfgPingResultDetailThis object indicates the result detail of ping operation.ro Enumeration .1.3.6.1.4.1.2011.5.25.172.2.1.1.9 |
hwVpnCfgPingRowStatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.2.1.1.10 |
hwVpnCfgPingSecondaryThis object indicates the local secondary PW.rw Enumeration .1.3.6.1.4.1.2011.5.25.172.2.1.1.11 |
hwVpnCfgPingIfNameThis object indicates the name of the AC interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.2.1.1.12 |
hwVpnCfgPingPwIdNewThis object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.
Because hwVpnCfgPingPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295, this object
ranging from 0 to 4294967295 is therefore added.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.172.2.1.1.13 |
hwVpnCfgPingResultTablehwVpnCfgPingResultTable. SEQUENCE OF HwVpnCfgPingResultEntry .1.3.6.1.4.1.2011.5.25.172.2.2 |
hwVpnCfgPingResultEntryThis object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation. HwVpnCfgPingResultEntry .1.3.6.1.4.1.2011.5.25.172.2.2.1 |
hwVpnCfgPingResultLocationThis object indicates two values: local(1) and remote(2). local(1) indicates configurations of the local end displayed in the probe result. remote(2) indicates configurations of the peer end displayed in the probe result. Enumeration .1.3.6.1.4.1.2011.5.25.172.2.2.1.1 |
hwVpnCfgPingResultVpnIdTypeThis object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.ro Enumeration .1.3.6.1.4.1.2011.5.25.172.2.2.1.2 |
hwVpnCfgPingResultVpnIdThis object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.2.2.1.3 |
hwVpnCfgPingResultDescThis object indicates the description of the VPN.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.172.2.2.1.4 |
hwVpnCfgPingResultVpnAdminStatusThis object indicates the management status of the VPN: up(1), down(2), and unknown(255).ro Enumeration .1.3.6.1.4.1.2011.5.25.172.2.2.1.5 |
hwVpnCfgPingResultOperStatusThis object indicates the operation status of the VPN: up(1), down(2), and unknown(255).ro Enumeration .1.3.6.1.4.1.2011.5.25.172.2.2.1.6 |
hwVpnCfgPingResultMtuThis object indicates the MTU value. The object represents the MTU value of the AC interface when the VPN type is PWE3 or Martini VLL, represents the MTU value of the VSI when the VPN type is VPLS. If the value of the object cannot be obtained, the object value is considered as 0.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.2.2.1.7 |
hwVpnCfgPingResultCeCountThis object indicates the number of CEs.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.2.2.1.8 |
hwVpnCfgPingResultActualIpTypeThis object indicates the type of the IP address of the PW on the local PE. It is used to identify the value type of hwVpnCfgPingResultActualIp.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.172.2.2.1.9 |
hwVpnCfgPingResultActualIpThis object indicates the IP address of the PW on the local PE.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.172.2.2.1.10 |
hwVpnCfgPingResultPeerIpTypeThis object indicates the type of the IP address of the PW on the peer PE. It is used to identify the value type of hwVpnCfgPingResultPeerIP.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.172.2.2.1.11 |
hwVpnCfgPingResultPeerIpThis object indicates the IP address of the PW on the peer PE.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.172.2.2.1.12 |
hwVpnCfgPingResultPwIdThis object indicates PW-ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.2.2.1.13 |
hwVpnCfgPingResultPeTypeThis object indicates the type of the PE (Whether the PE is an SPE.)ro Enumeration .1.3.6.1.4.1.2011.5.25.172.2.2.1.14 |
hwVpnCfgPingResultVcTypeThis object indicates the VC type.ro HWL2VpnVcEncapsType (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.172.2.2.1.15 |
hwVpnCfgPingResultLabelInThis object indicates the incoming label of the interface at the PW side.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.2.2.1.16 |
hwVpnCfgPingResultLableOutThis object indicates the outgoing label of the interface at the PW side.ro Integer32 .1.3.6.1.4.1.2011.5.25.172.2.2.1.17 |
hwVpnCfgPingResultControlWordThis object indicates whether the keyword control-word is configured.ro Enumeration .1.3.6.1.4.1.2011.5.25.172.2.2.1.18 |
hwVpnCfgPingResultPriOrSecThis object indicates whether the local PW is a primary PW or a secondary PW.ro Enumeration .1.3.6.1.4.1.2011.5.25.172.2.2.1.19 |
hwVpnCfgPingResultVplsIDThis object indicates the virtual private LAN service id.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.172.2.2.1.20 |
hwVpnCfgPingResultRDThis object indicates the route distinguisher.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.172.2.2.1.21 |
hwVpnCfgPingResultPwIdNewThis object indicates PW-ID. Because hwVpnCfgPingResultPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295,
this object ranging from 0 to 4294967295 is therefore added.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.172.2.2.1.22 |
hwVpnCfgPingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.2.3 |
hwVpnCfgPingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.2.3.1 |
hwVpnCfgPingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.172.2.3.2 |
hwVpnCfgPingResultIRtTablehwVpnCfgPingResultIRtTable. SEQUENCE OF HwVpnCfgPingResultIRtEntry .1.3.6.1.4.1.2011.5.25.172.2.4 |
hwVpnCfgPingResultIRtEntryThis object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation. HwVpnCfgPingResultIRtEntry .1.3.6.1.4.1.2011.5.25.172.2.4.1 |
hwVpnCfgPingResultIRtIndexThis object indicates the index of an import vpn target. Integer32 .1.3.6.1.4.1.2011.5.25.172.2.4.1.1 |
hwVpnCfgPingResultIRtThis object indicates the import vpn target.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.172.2.4.1.2 |
hwVpnCfgPingResultERtTablehwVpnCfgPingResultERtTable. SEQUENCE OF HwVpnCfgPingResultERtEntry .1.3.6.1.4.1.2011.5.25.172.2.5 |
hwVpnCfgPingResultERtEntryThis object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation. HwVpnCfgPingResultERtEntry .1.3.6.1.4.1.2011.5.25.172.2.5.1 |
hwVpnCfgPingResultERtIndexThis object indicates the index of an export vpn target.. Integer32 .1.3.6.1.4.1.2011.5.25.172.2.5.1.1 |
hwVpnCfgPingResultERtThis object indicates the export vpn target.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.172.2.5.1.2 |