HUAWEI-VOP-MIB
AI MIB Summary
The HUAWEI-VOP-MIB module manages xDSL line configuration parameters and profile assignments on Huawei broadband access equipment by implementing the Broadband Forum TR-165 Vector of Profiles data model. It enables the monitoring and control of specific DSL service attributes, including profile selection, line rates, and modulation profiles, to ensure consistent service delivery across xDSL interfaces.
The MIB is used for xDSL Configuration according to the Vector of Profiles (VoP) data model specified in Broadband Forum Technical Report TR-165 (http://www.broadband-forum.org/technical/download/TR-165.pdf).
Main OID:
hwVOPGlobalModule.1.3.6.1.4.1.2011.6.144
295
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
295 total| Object Name |
|---|
hwVOPGlobalModuleThe MIB is used for xDSL Configuration according to the Vector
of Profiles (VoP) data model specified in Broadband Forum
Technical Report TR-165
(http://www.broadband-forum.org/technical/download/TR-165.pdf). MODULE-IDENTITY .1.3.6.1.4.1.2011.6.144 |
hwVOPObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.1 |
hwVOPProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.1.1 |
hwVOPDataRateProfileIndexNextThis object contains an appropriate value to be used for hwVOPDataRateConfProfIndex
when creating entries in the hwVOPDataRateConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPDataRateConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be
made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.1 |
hwVOPDataRateConfProfTableThe table hwVOPDataRateConfProfTable contains data rate configuration parameters
for the DSL channel(s).
Entries in this table MUST be maintained in a persistent manner.
Two default profiles with index numbers 1 and 2 will always exist and its parameters
will be set to vendor-specific values, unless otherwise specified in this document
The index of this table is hwVOPDataRateConfProfIndex. SEQUENCE OF HWVOPDataRateConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.2 |
hwVOPDataRateConfProfEntryThe table hwVOPDataRateConfProfTable contains data rate configuration parameters
for the DSL channel(s).
Entries in this table MUST be maintained in a persistent manner.
Two default profiles with index numbers 1 and 2 will always exist and its parameters
will be set to vendor-specific values, unless otherwise specified in this document
The index of this entry is hwVOPDataRateConfProfIndex. HWVOPDataRateConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.2.1 |
hwVOPDataRateConfProfIndexThe hwVOPDataRateConfProfIndex identifies a row in the hwVOPDataRateConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.1 |
hwVOPDataRateConfProfRowStatusThe hwVOPDataRateConfProfRowStatus is used to create a new row or to modify
or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to
'destroy' or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in vopDataRateProfTable is said to be unreferenced
when there is no instance of hwVOPActSetupUsDataRateProfId1-4 and
hwVOPActSetupDsDataRateProfId1-4 in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.2.1.2 |
hwVOPDataRateConfProfDescriptionThe hwVOPDataRateConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.2.1.3 |
hwVOPDataRateConfProfMinDataRateIf retransmission is not used in a given transmit direction,this parameter specifics
minimum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.4 |
hwVOPDataRateConfProfMinResDataRateThe minimum reserved net data rate for the bearer channel, coded in bit/s.
This parameter is only used if the Rate Adaptation Mode in the direction
of the bearer channel (i.e., xdsl2LConfProfRaModeDs) is set to dynamicRa.
Unit: bit/s.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.5 |
hwVOPDataRateConfProfMaxDataRateIf retransmission is not used in a given transmit direction,this parameter specifics
maximum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.6 |
hwVOPDataRateConfProfMinDataRateLowPwrThis parameter specifies the minimum net data rate for the bearer channel
as desired by the operator of the system during the low power state (L1/L2).
The power management low power states L1 and L2 are defined in ITU-T Recs
G.992.2 and G.992.3 respectively.
The data rate is coded in steps of bit/s.
Unit: bit/s.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.7 |
hwVOPDataRateConfProfMaxBerMaximum Bit Error Ratio of the bearer channel.rw Xdsl2MaxBer .1.3.6.1.4.1.2011.6.144.1.1.2.1.8 |
hwVOPDataRateConfProfUsDataRateIf retransmission is not used in a given transmit direction, This parameter is
a threshold on the net data rate upshift achieved over one or more bearer channel data
rate adaptations. An upshift rate change alarm (event) is triggered when the actual
data rate exceeds the data rate at the last entry into showtime by more than the threshold.
The data rate threshold is coded in bit/s.
Unit: bit/s.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.9 |
hwVOPDataRateConfProfDsDataRateIf retransmission is not used in a given transmit direction, This parameter is
a threshold on the net data rate downshift achieved over one or more bearer channel data
rate adaptations. A downshift rate change alarm (event) is triggered when the actual
data rate is below the data rate at the last entry into showtime by more than the threshold.
The data rate threshold is coded in bit/s.
Unit: bit/s.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.10 |
hwVOPDataRateConfProfDataPathModeThe channel data path mode.rw Xdsl2DataPathMode .1.3.6.1.4.1.2011.6.144.1.1.2.1.11 |
hwVOPDataRateConfProfMinEtrRtxIf retransmission is used in a given transmit direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
Unit: bit/srw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.12 |
hwVOPDataRateConfProfMaxEtrRtxIf retransmission is used in a given transmit direction, this parameter specifies the
maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
Unit: bit/srw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.13 |
hwVOPDataRateConfProfMaxNdrRtxIf retransmission is used in a given transmit direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.
Unit: bit/srw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.2.1.14 |
hwVOPLineSpectrumProfileIndexNextThis object contains an appropriate value to be used for hwVOPLineSpectrumConfProfIndex
when creating entries in the hwVOPLineSpectrumConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPLineSpectrumConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy
when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.3 |
hwVOPLineSpectrumConfProfTableThe table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
during the service delivery phase, independently for upstream and downstream.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set
to vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPLineSpectrumConfProfIndex. SEQUENCE OF HWVOPLineSpectrumConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.4 |
hwVOPLineSpectrumConfProfEntryThe table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
during the service delivery phase, independently for upstream and downstream.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set
to vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPLineSpectrumConfProfIndex. HWVOPLineSpectrumConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.4.1 |
hwVOPLineSpectrumConfProfIndexThe hwVOPLineSpectrumConfProfIndex identifies a row in the hwVOPLineSpectrumConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.1 |
hwVOPLineSpectrumConfProfRowStatusThe hwVOPLineSpectrumConfProfRowStatus is used to create a new row
or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object
to 'destroy' or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPLineSpectrumConfProfTable is said to be not referenced when there is no instance
of hwVOPActSetupLSpectrumProfId in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.4.1.2 |
hwVOPLineSpectrumConfProfDescriptionThe hwVOPLineSpectrumConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.4.1.3 |
hwVOPLineSpectrumConfProfXtuTransSysEnaxTU Transmission System Enabling (XTSE).
A list of the different coding types enabled in this profile.
It is coded in a bit-map representation with 1 or more bits set.
A bit set to '1' means that the xTUs may apply the respective coding for the DSL line.
A bit set to '0' means that the xTUs cannot apply the respective coding for the xDSL line.
All 'reserved' bits should be set to '0'.rw Xdsl2TransmissionModeType .1.3.6.1.4.1.2011.6.144.1.1.4.1.4 |
hwVOPLineSpectrumConfProfPmModePower management state Enabling (PMMode).
Defines the power states the xTU-C or xTU-R may autonomously transition to on this line.
This is a set of bits, where any bit with a '1' value means that the xTU is allowed
to transit into the respective state and any bit with a '0' value means
that the xTU is not allowed to transit into the respective state.rw Xdsl2LinePmMode .1.3.6.1.4.1.2011.6.144.1.1.4.1.5 |
hwVOPLineSpectrumConfProfL0TimeThe minimum time (in seconds) between an Exit from the L2 state
and the next Entry into the L2 state.
Unit: seconds.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.6 |
hwVOPLineSpectrumConfProfL2TimeThe minimum time (in seconds) between an Entry into the L2 state
and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State.
Unit: secondsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.7 |
hwVOPLineSpectrumConfProfL3TimeThis minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state.
Unit: secondsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.8 |
hwVOPLineSpectrumConfProfL2AtprThe maximum aggregate transmit power reduction (in dB) that can be performed at transition
of L0 to L2 state or through a single Power Trim in the L2 state.
Unit: dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.9 |
hwVOPLineSpectrumConfProfL2AtprtThe total maximum aggregate transmit power reduction (in dB)
that can be performed in an L2 state. This is the sum of all reductions
of L2 Request (i.e., at transition of L0 to L2 state) and Power Trims.
Unit: dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.10 |
hwVOPLineSpectrumConfProfReferenceClockThis object configures the clock reference for the ATU-C in a VDSL Line.rw Xdsl2LineClockReferenceType .1.3.6.1.4.1.2011.6.144.1.1.4.1.11 |
hwVOPLineSpectrumConfProfBitSwapDsEnable or disable the bit swap downstream of a line.rw Xdsl2BitSwap .1.3.6.1.4.1.2011.6.144.1.1.4.1.12 |
hwVOPLineSpectrumConfProfBitSwapUsEnable or disable the bit swap upstream of a line.rw Xdsl2BitSwap .1.3.6.1.4.1.2011.6.144.1.1.4.1.13 |
hwVOPLineSpectrumConfProfScMaskDsDownstream subcarriers mask.
A bitmap of 512 bits that allows masking up to 512 downstream subcarriers.
If bit i (0 <= i < NSCds) is set to '1', the respective downstream subcarrier
is masked, and if set to '0', the respective subcarrier is unmasked.
Note that there should always be unmasked subcarriers (i.e.,this object cannot be all 1's).
Also note that if NSCds < 512, all bits i(NSCds < i <= 512) should be set to '1'.
NSCds is the highest subcarrier index that can be transmitted in the downstream direction.
For G.992.3, G.992.4, and G.992.5, it is defined in the corresponding Recommendations.
For G.992.1, NSCds = 256 and for G.992.2, NSCds = 128.rw Xdsl2ScMaskDs .1.3.6.1.4.1.2011.6.144.1.1.4.1.14 |
hwVOPLineSpectrumConfProfScMaskUsUpstream subcarriers mask.
A bitmap of 512 bits that allows masking up to 512 downstream subcarriers.
If bit i (0 <= i < NSCds) is set to '1', the respective downstream subcarrier
is masked, and if set to '0', the respective subcarrier is unmasked.
Note that there should always be unmasked subcarriers (i.e.,this object cannot be all 1's).
Also note that if NSCds < 512, all bits i(NSCds < i <= 512) should be set to '1'.
NSCus is the highest subcarrier index that can be transmitted in the upstream direction.
For G.992.3, G.992.4, and G.992.5, it is defined in the corresponding Recommendation.
For Annex A/G.992.1 and G.992.2, NSCus = 32 and for Annex B/G.992.1, NSCus = 64.rw Xdsl2ScMaskUs .1.3.6.1.4.1.2011.6.144.1.1.4.1.15 |
hwVOPLineSpectrumConfProfVdsl2CarMaskVDSL2 specific subcarriers mask.
This configuration parameter defines the restrictions, additional to the band plan, to determine
the set of subcarriers allowed for transmission in both upstream and downstream directions.
The parameter shall describe the not masked subcarriers as one or more frequency bands.
Each band is represented by start and stop subcarrier indices with a subcarrier spacing of 4.3125kHz.
The valid range of subcarrier indices runs from 0 to at least the index of the highest allowed
subcarrier in both transmission directions among all profiles enabled by the parameter
hwVOPLineSpectrumConfProfProfiles.
Up to 32 bands may be specified. Other subcarriers shall be masked.rw Xdsl2CarMask .1.3.6.1.4.1.2011.6.144.1.1.4.1.16 |
hwVOPLineSpectrumConfProfMsgMinUsMinimum Overhead Rate Upstream.
Defines the minimum rate of the message-based overhead
that shall be maintained by the xTU in upstream direction.
Expressed in bits per second and ranges from 4000 to 248000 bps.
Unit: bits/second.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.17 |
hwVOPLineSpectrumConfProfMsgMinDsMinimum Overhead Rate Downstream.
Defines the minimum rate of the message-based overhead
that shall be maintained by the xTU in downstream direction.
Expressed in bits per second and ranges from 4000 to 248000 bps.
Unit: bits/second.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.18 |
hwVOPLineSpectrumConfProfProfilesThe configuration parameter contains the G.993.2 profiles to
be allowed by the near-end xTU on this line.
It is coded in a bitmap representation (0 if not allowed, 1 if allowed).rw Xdsl2LineProfiles .1.3.6.1.4.1.2011.6.144.1.1.4.1.19 |
hwVOPLineSpectrumConfProfUs0MaskThe configuration parameter contains the US0 PSD masks to be allowed
by the near-end xTU on the line.
This parameter is only defined for G.993.2 Annex A.
It is represented as a bitmap (0 if not allowed and 1 if allowed).rw Xdsl2LineUs0Mask .1.3.6.1.4.1.2011.6.144.1.1.4.1.20 |
hwVOPLineSpectrumConfProfCeFlagThis parameter is a bit that enables the use of the optional cyclic extension values.rw Xdsl2LineCeFlag .1.3.6.1.4.1.2011.6.144.1.1.4.1.21 |
hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsedThe value of this object represents a pointer to one or more rows
in the hwVOPModeSpecificPSDConfProfTable. The number of pointers equals to the xDSL modes
enabled in hwVOPLineSpectrumConfProfXtuTransSysEna.
The following rule applies:
Every Octet addresses a xDSL mode (represented by one Bit in hwVOPLineSpectrumConfProfXtuTransSysEna).
The value identifies the specific profile in the hwVOPModeSpecificPSDConfProfTable
which applies for the specific mode.
The value '0' means that no profile applies because the respective mode is not enabled.
Each transmission mode enabled (hwVOPLineSpectrumConfProfXtuTransSysEna)
in the hwVOPLineSpectrumConfProfTable is covered by one and only one
of the Mode Specific PSD Profiles contained in that Line Spectrum Profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.4.1.22 |
hwVOPLineSpectrumConfProfForceInpDsIf retransmission is not used in a given transmit direction,this parameter indicates that the framer settings
of the downstream bearer shall be selected such that the impulse noise protection computed according to the
formula specified in the relevant Recommendation is greater than or equal to the minimal impulse noise protection
requirement.
This flag shall have the same value for all the bearers of one line in the same direction.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.4.1.23 |
hwVOPLineSpectrumConfProfForceInpUsIf retransmission is not used in a given transmit direction,this parameter indicates that the framer settings
of the upstream bearer shall be selected such that the impulse noise protection computed according to the
formula specified in the relevant Recommendation is greater than or equal to the minimal impulse noise protection
requirement.
This flag shall have the same value for all the bearers of one line in the same direction.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.4.1.24 |
hwVOPLineSpectrumConfProfRtxModeDsThe mode of operation of G.998.4 retransmission in downstream direction.
Options:
1. forbidden (0) - G.998.4 retransmission not allowed.
2. preferred (1) - G.998.4 retransmission is preferred.
3. forced (2) - Force the use of the G.998.4 retransmission.
4. testmode (3) - Force the use of the G.998.4 retransmission in test mode.rw Enumeration .1.3.6.1.4.1.2011.6.144.1.1.4.1.25 |
hwVOPLineSpectrumConfProfRtxModeUsThe mode of operation of G.998.4 retransmission in upstream direction.
Options:
1. forbidden (0) - G.998.4 retransmission not allowed.
2. preferred (1) - G.998.4 retransmission is preferred.
3. forced (2) - Force the use of the G.998.4 retransmission.
4. testmode (3) - Force the use of the G.998.4 retransmission in test mode.rw Enumeration .1.3.6.1.4.1.2011.6.144.1.1.4.1.26 |
hwVOPLineSpectrumConfProfLeftrThreshDsIf retransmission is used in downstream direction, this parameter specifies the
threshold for declaring a near-end leftr defect. The value is coded as a fraction of the
NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the
ETR shall be used as the default threshold for declaring a leftr defect.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.27 |
hwVOPLineSpectrumConfProfLeftrThreshUsIf retransmission is used in upstream direction, this parameter specifies the
threshold for declaring a near-end leftr defect. The value is coded as a fraction of the
NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the
ETR shall be used as the default threshold for declaring a leftr defect.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.4.1.28 |
hwVOPModeSpecificPSDProfileIndexNextThis object contains an appropriate value to be used for hwVOPModeSpecificPSDConfProfIndex
when creating entries in the hwVOPModeSpecificPSDConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPModeSpecificPSDConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.5 |
hwVOPModeSpecificPSDConfProfTableThe table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
and upstream PSDs for a specific xDSL mode.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPModeSpecificPSDConfProfIndex. SEQUENCE OF HWVOPModeSpecificPSDConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.6 |
hwVOPModeSpecificPSDConfProfEntryThe table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
and upstream PSDs for a specific xDSL mode.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPModeSpecificPSDConfProfIndex. HWVOPModeSpecificPSDConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.6.1 |
hwVOPModeSpecificPSDConfProfIndexThe hwVOPModeSpecificPSDConfProfIndex identifies a row in the hwVOPModeSpecificPSDConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.6.1.1 |
hwVOPModeSpecificPSDConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPModeSpecificPSDConfProfTable is said to be unreferenced when there is no instance of
hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed in the hwVOPLineSpectrumConfProfTable
which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.6.1.2 |
hwVOPModeSpecificPSDConfProfDescriptionThe hwVOPModeSpecificPSDConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.6.1.3 |
hwVOPModeSpecificPSDConfProfXdslModeA list of the different xDSL modes enabled in this profile.
It is coded in a bit-map representation with 1 or more bits set.
A bit set to '1' means that the profile applies to the respective xDSL Mode.
A bit set to '0' means that the profile does not apply to the respective xDSL Mode.
All 'reserved' bits should be set to '0'.
This object is deprecated in favour of hwVOPLineSpectrumConfProfXtuTransSysEna.rwdeprecated Xdsl2TransmissionModeType .1.3.6.1.4.1.2011.6.144.1.1.6.1.4 |
hwVOPModeSpecificPSDConfProfMaxNomPsdDsThe maximum nominal transmit PSD in the downstream direction during initialization and Showtime.
It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm/Hz).
Unit: 0.1 dBm/Hz.rw Integer32 (-600..-300) UNITS "0.1 dBm/Hz" .1.3.6.1.4.1.2011.6.144.1.1.6.1.5 |
hwVOPModeSpecificPSDConfProfMaxNomPsdUsThe maximum nominal transmit PSD in the upstream direction during initialization and Showtime.
It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm/Hz).
Unit: 0.1 dBm/Hz.rw Integer32 (-600..-300) UNITS "0.1 dBm/Hz" .1.3.6.1.4.1.2011.6.144.1.1.6.1.6 |
hwVOPModeSpecificPSDConfProfMaxNomAtpDsThe maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime.
It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).
Unit: 0.1 dBm.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.6.1.7 |
hwVOPModeSpecificPSDConfProfMaxNomAtpUsThe maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime.
It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).
Unit: 0.1 dBm.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.6.1.8 |
hwVOPModeSpecificPSDConfProfaxAggRxPwrUsThe maximum upstream aggregate receive power over the relevant set of subcarriers.
The xTU-C should verify that the upstream power cutback is such that this maximum
aggregate receive power value is honored.
It ranges from -255 to 255 units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
A value of 0x7FFFFFFF (2147483647) means that there is no limit.
Unit: 0.1 dBm.rw Integer32 (-255..255 | 2147483647) UNITS "0.1 dBm" .1.3.6.1.4.1.2011.6.144.1.1.6.1.9 |
hwVOPModeSpecificPSDConfProfPsdMaskDsThe downstream PSD mask applicable at the U-R2 reference point.
This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask
defined in the relevant Recommendation (e.g., ITU-T Recs G.992.5 and G.993.2).
This is a string of 32 pairs of values in the following structure:
Octets 0-1 - Index of 1st subcarrier used in the context of a first breakpoint.
Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint.
Octets 6-8 - Same, for a 3rd breakpoint.
This architecture continues until octets 94-95, which are associated with a 32nd breakpoint.
Each subcarrier index is an unsigned number in the range 0 and NSCds-1.
Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.
Valid values are in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 32, all remaining octets are set to the value 0.
Note that the content of this object should be correlated with the subcarriers mask and with the RFI setup.rw Xdsl2PsdMaskDs .1.3.6.1.4.1.2011.6.144.1.1.6.1.10 |
hwVOPModeSpecificPSDConfProfPsdMaskUsThe upstream PSD mask applicable at the U-R2 reference point.
This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask
defined in the relevant Recommendation (e.g., ITU-T Recs G.992.5 and G.993.2).
This is a string of 16 pairs of values in the following structure:
Octets 0-1 - Index of 1st subcarrier used in the context of a first breakpoint.
Octet 2 - The PSD reduction for the subcarrier indicated in octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint.
Octets 6-8 - Same, for a 3rd breakpoint.
This architecture continues until octets 9-47, which are associated with a 16th breakpoint.
Each subcarrier index is an unsigned number in the range 0 and NSCus-1.
Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz.
Valid values are in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 16, all remaining octets are set to the value 0.
Note that the content of this object should be correlated with the subcarriers mask and with the RFI setup.rw Xdsl2PsdMaskUs .1.3.6.1.4.1.2011.6.144.1.1.6.1.11 |
hwVOPModeSpecificPSDConfProfPsdMaskSelectUsThe selected upstream PSD mask.
This parameter is used only for Annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in hwVOPLineSpectrumConfProfXtuTransSysEna.rw Xdsl2LinePsdMaskSelectUs .1.3.6.1.4.1.2011.6.144.1.1.6.1.12 |
hwVOPModeSpecificPSDConfProfLimitMaskThis configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class,
enabled by the near-end xTU on this line for each class of profiles.
This parameter is defined per VDSL2 Annex enabled in the xdsl2LConfProfXtuTransSysEna object.
Through this parameter, several limit PSD masks of the selected PSD mask class
(hwVOPModeSpecificPSDConfProfClassMask) may be enabled.
The enabling parameter is coded in a bitmap representation
(0 if the associated mask is not allowed, 1 if it is allowed).rw Xdsl2LineLimitMask .1.3.6.1.4.1.2011.6.144.1.1.6.1.13 |
hwVOPModeSpecificPSDConfProfUs0DisableThis configuration parameter indicates if the use of US0 is disabled for each limit PSD
mask enabled in the hwVOPModeSpecificPSDConfProfLimitMask parameter.
This parameter is defined per VDSL2 Annex enabled in the hwVOPLineSpectrumConfProfXtuTransSysEna object.
For each limit PSD mask enabled in hwVOPModeSpecificPSDConfProfLimitMask parameter,
a bit shall indicate if US0 is disabled.
The disabling parameter is coded as a bitmap. The bit is set to 1 if US0 is disabled
for the associated limit mask.
This parameter and the hwVOPModeSpecificPSDConfProfLimitMask parameter use the same structure.rw Xdsl2LineUs0Disable .1.3.6.1.4.1.2011.6.144.1.1.6.1.14 |
hwVOPModeSpecificPSDConfProfClassMaskIn order to reduce the number of configuration possibilities, the limit Power Spectral Density
masks (see hwVOPModeSpecificPSDConfProfLimitMask) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each limit PSD mask of a specific
class are equal in their respective passband above 552 kHz.
This parameter is defined per VDSL2 Annex enabled in the hwVOPLineSpectrumConfProfXtuTransSysEna object.
It selects a single PSD mask class per Annex that is activated at the VTU-O.rw Xdsl2LineClassMask .1.3.6.1.4.1.2011.6.144.1.1.6.1.15 |
hwVOPUPBOProfileIndexNextThis object contains an appropriate value to be used for hwVOPUPBOConfProfIndex
when creating entries in the hwVOPUPBOConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPUPBOConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.7 |
hwVOPUPBOConfProfTableThe table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be
set to vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPUPBOConfProfIndex. SEQUENCE OF HWVOPUPBOConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.8 |
hwVOPUPBOConfProfEntryThe table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be
set to vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPUPBOConfProfIndex. HWVOPUPBOConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.8.1 |
hwVOPUPBOConfProfIndexThe hwVOPUPBOConfProfIndex identifies a row in the hwVOPUPBOConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.1 |
hwVOPUPBOConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPUPBOConfProfTable is said to be unreferenced when there is no instance of
hwVOPActSetupUpboProfId in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.8.1.2 |
hwVOPUPBOConfProfDescriptionThe hwVOPUPBOConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.8.1.3 |
hwVOPUPBOConfProfUpboKLThis configuration parameter defines the electrical length expressed in dB at 1MHz, kl0,
configured by the CO-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB.
This parameter is relevant only if hwVOPUPBOConfProfUpboKLF is set to override(2),
which indicates that this parameter's value will override the VTUs' determination of the electrical length.
If hwVOPUPBOConfProfUpboKLF is set either to auto(1) or disableUpbo(3), then this parameter will be ignored.
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.4 |
hwVOPUPBOConfProfUpboKLFDefines the upstream power backoff force mode.rw Xdsl2UpboKLF .1.3.6.1.4.1.2011.6.144.1.1.8.1.5 |
hwVOPUPBOConfProfKlAutoThis parameter defines the mode in which kl0 is computed when hwVOPUPBOConfProfUpboKLF is auto.
Options:
1
2
3
4rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.6 |
hwVOPUPBOConfProfPsdAUs1This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US1.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs1 to 4000 and hwVOPUPBOConfProfPsdBUs1 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.7 |
hwVOPUPBOConfProfPsdBUs1This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US1.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs1 to 4000 and hwVOPUPBOConfProfPsdBUs1 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.8 |
hwVOPUPBOConfProfPsdAUs2This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US2.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs2 to 4000 and hwVOPUPBOConfProfPsdBUs2 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.9 |
hwVOPUPBOConfProfPsdBUs2This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US2.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs2 to 4000 and hwVOPUPBOConfProfPsdBUs2 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.10 |
hwVOPUPBOConfProfPsdAUs3This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US3.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs3 to 4000 and hwVOPUPBOConfProfPsdBUs3 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.11 |
hwVOPUPBOConfProfPsdBUs3This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US3.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs3 to 4000 and hwVOPUPBOConfProfPsdBUs3 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.12 |
hwVOPUPBOConfProfPsdAUs4This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US4.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs4 to 4000 and hwVOPUPBOConfProfPsdBUs4 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.13 |
hwVOPUPBOConfProfPsdBUs4This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US4.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs4 to 4000 and hwVOPUPBOConfProfPsdBUs4 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.rw Integer32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.14 |
hwVOPUPBOConfProfBoostModeThe Equalized FEXT UPBO method.
Options:
1. disable(1) - The Equalized FEXT UPBO method is not supported.
2. enable(2) - The Equalized FEXT UPBO method is supported.rw Xdsl2UpboBoostMode .1.3.6.1.4.1.2011.6.144.1.1.8.1.15 |
hwVOPUPBOConfProfUpboKLREFUs1This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US1, for the optional Equalized FEXT UPBO method.
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
Unit: 0.1 dB.rw Integer32 (0 | 18..635) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.144.1.1.8.1.16 |
hwVOPUPBOConfProfUpboKLREFUs2This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US2, for the optional Equalized FEXT UPBO method.
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
Unit: 0.1 dB.rw Integer32 (0 | 18..635) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.144.1.1.8.1.17 |
hwVOPUPBOConfProfUpboKLREFUs3This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US3, for the optional Equalized FEXT UPBO method.
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
Unit: 0.1 dB.rw Integer32 (0 | 18..635) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.144.1.1.8.1.18 |
hwVOPUPBOConfProfUpboKLREFUs4This parameter defines the UPBO reference electrical length used to compute the upstream
power back-off for the upstream band US4, for the optional Equalized FEXT UPBO method.
The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
Unit: 0.1 dB.rw Integer32 (0 | 18..635) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.144.1.1.8.1.19 |
hwVOPUPBOConfProfAeleModeThis parameter defines the UPBO electrical length estimation mode to be used
in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.993.2.
The value of this parameter is 0, 1, 2 or 3.
0-ELE_M0, 1-ELE_DS, 2-ELE_PB, 3-ELE_MINrw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.20 |
hwVOPUPBOConfProfUpboElmtThis parameter defines the UPBO electrical length minimum threshold percentile
in percent used in the Alternative Electrical Length Estimation method (ELE-M1)
in clause 7.2.1.3.2.2/G.993.2. It is set by network management via the CO-MIB.
The parameter ranges from 0 to 15 percent in steps of 1 percent.
This value is communicated to the VTU-R via G.994.1 at start-up.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.8.1.21 |
hwVOPDPBOProfileIndexNextThis object contains an appropriate value to be used for hwVOPDPBOConfProfIndex
when creating entries in the hwVOPDPBOConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPDPBOConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.9 |
hwVOPDPBOConfProfTableThe table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPDPBOConfProfIndex. SEQUENCE OF HWVOPDPBOConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.10 |
hwVOPDPBOConfProfEntryThe table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPDPBOConfProfIndex. HWVOPDPBOConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.10.1 |
hwVOPDPBOConfProfIndexThe hwVOPDPBOConfProfIndex identifies a row in the hwVOPDPBOConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.1 |
hwVOPDPBOConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPDPBOConfProfTable is said to be not referenced when there is no
instance of hwVOPActSetupDpboProfId in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.10.1.2 |
hwVOPDPBOConfProfProfDescriptionThe hwVOPDPBOConfProfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.10.1.3 |
hwVOPDPBOConfProfWkMdMaskThis configuration parameter defines the current enabled DPBO working mode mask.
DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2.
Options :
1
2
3
4
5
6
7rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.4 |
hwVOPDPBOConfProfEsELThis configuration parameter defines the assumed electrical length of cables (E-side cables)
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C
that is subject to spectrally shaped downstream power back- off (DPBO) depending on this length.
The electrical length is defined as the loss (in dB) of an equivalent length of hypothetical
cable at a reference frequency defined by the network operator or in spectrum management regulations.
This parameter shall be coded as an unsigned integer representing an electrical length
from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB.
All values in the range are valid. If this parameter is set to zero, the DPBO shall be disabled.
Unit: 0.5dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.5 |
hwVOPDPBOConfProfEselMinDPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using
the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this KVz
using cross-cables to additional KVz), including the KVz at the MSAN site. This value must
be adjustable as the minimum requirement via the SNMP interface in the configuration profile
for each VDSL2 port, and is set individually for each MSAN site and usage. As an option,
As an option, adjustment can be done for each MSAN or line card, thus taking effect for
entire port groups. It is used only for determining the MUF.
Unit: 0.5dB.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.6 |
hwVOPDPBOConfProfEPsdThis configuration parameter defines the PSD mask that is assumed to be permitted at the exchange.
This parameter shall use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds).
The maximum number of breakpoints for xdsl2LConfProfDpboEPsd is 16.rw Xdsl2PsdMaskDs .1.3.6.1.4.1.2011.6.144.1.1.10.1.7 |
hwVOPDPBOConfProfCableModelAThe E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the
xTU-C that is subject to spectrally shaped downstream power back-off (DPBO) depending on this value.
The cable model is in terms of three scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side cables calculated
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.
Possible values shall be coded as unsigned integers representing a scalar value
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2^-8.
All values in the range are valid. This parameter is used only for G.993.2.
Unit: 2^-8.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.8 |
hwVOPDPBOConfProfCableModelBThe E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C
that is subject to spectrally shaped downstream power back-off (DPBO) depending on this value.
The cable model is in terms of three scalars dsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side cables calculated
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.
Possible values shall be coded as unsigned integers representing a scalar value
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2^-8.
All values in the range are valid. This parameter is used only for G.993.2.
Unit: 2^-8.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.9 |
hwVOPDPBOConfProfCableModelCThe E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables
connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the
xTU-C that is subject to spectrally shaped downstream power back-off (DPBO) depending on this value.
The cable model is in terms of three scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side cables calculated
from the xdsl2LConfProfDpboEsEL (DPBOESEL) parameter.
Possible values shall be coded as unsigned integers representing a scalar value
from -1 (coded as 0) to 1.5 (coded as 640) in steps of 2^-8.
All values in the range are valid. This parameter is used only for G.993.2.
Unit: 2^-8.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.10 |
hwVOPDPBOConfProfMusThis configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz)
for exchange based services, used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX)
defined below [to determine the DPBO]. It shall be coded as an unsigned integer representing
a PSD mask level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz.
All values in the range are valid.
NOTE - The PSD mask level is 3.5 dB above the signal PSD level.
This parameter is used only for G.993.2.
Unit: -0.5 dBm/Hz.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.11 |
hwVOPDPBOConfProfFMinThis configuration parameter defines the minimum frequency from which the DPBO shall be applied.
It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps of 4.3125 kHz.
This parameter is used only for G.993.2.
Unit: 4.3125 kHz.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.12 |
hwVOPDPBOConfProfFMaxThis configuration parameter defines the maximum frequency at which DPBO may be applied.
It ranges from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
This parameter is used only for G.993.2.
Unit: 4.3125 kHz.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.10.1.13 |
hwVOPDPBOConfFEXTFactorThis configuration parameter defines the switch of the delta FEXT-factor.
Options:
1. disable(1) - The switch of the delta FEXT-factor is disabled
2. enable(2) - The switch of the delta FEXT-factor is enabledrw Enumeration .1.3.6.1.4.1.2011.6.144.1.1.10.1.14 |
hwVOPRFIProfileIndexNextThis object contains an appropriate value to be used for hwVOPRFIConfProfIndex
when creating entries in the hwVOPRFIConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPRFIConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.11 |
hwVOPRFIConfProfTableRFI notches are necessary only when radio services may be disturbed during operation,
therefore this parameter should be separated from all other profiles.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPRFIConfProfIndex. SEQUENCE OF HWVOPRFIConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.12 |
hwVOPRFIConfProfEntryRFI notches are necessary only when radio services may be disturbed during operation,
therefore this parameter should be separated from all other profiles.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPRFIConfProfIndex. HWVOPRFIConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.12.1 |
hwVOPRFIConfProfIndexThe hwVOPRFIConfProfIndex identifies a row in the hwVOPRFIConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.12.1.1 |
hwVOPRFIConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPRFIConfProfTable is said to be unreferenced when there is no instance of
hwVOPActSetupRfiProfId in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.12.1.2 |
hwVOPRFIConfProfDescriptionThe hwVOPRFIConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.12.1.3 |
hwVOPRFIConfProfRfiBandsFor ADSL2plus operation mode, this configuration parameter defines the subset of downstream PSD mask
breakpoints, as specified in hwVOPModeSpecificPSDConfProfPsdMaskDs (PSDMASKds), that shall be
used to notch an RFI band. This subset consists of pairs of consecutive subcarrier indices
belonging to breakpoints: [ti; ti + 1], corresponding to the low level of the notch.
The specific interpolation around these points is defined in ITU-T Rec. G.992.5.
For VDSL2 operation mode, this configuration parameter defines the bands where the PSD shall be reduced
as specified in ITU-T Rec. G.993.2 #7.2.1.2. Each band shall be represented by a start and stop subcarrier
indices with a subcarrier spacing of 4.3125 kHz.
Up to 16 bands may be specified.
This parameter defines the RFI bands for both upstream and downstream directions.rw Xdsl2RfiBands .1.3.6.1.4.1.2011.6.144.1.1.12.1.4 |
hwVOPSNRMarginProfileIndexNextThis object contains an appropriate value to be used for hwVOPSNRMarginConfProfIndex
when creating entries in the hwVOPSNRMarginConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPSNRMarginConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.13 |
hwVOPSNRMarginConfProfTableNoise margins are important for line robustness and need to be configured independently
from other spectrum related parameters to reduce the amount of combinations.
These parameters may be adjusted because of the changed disturber's impact while data rates aren't changed.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPSNRMarginConfProfIndex. SEQUENCE OF HWVOPSNRMarginConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.14 |
hwVOPSNRMarginConfProfEntryNoise margins are important for line robustness and need to be configured independently
from other spectrum related parameters to reduce the amount of combinations.
These parameters may be adjusted because of the changed disturber's impact while data rates aren't changed.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPSNRMarginConfProfIndex. HWVOPSNRMarginConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.14.1 |
hwVOPSNRMarginConfProfIndexThe hwVOPSNRMarginConfProfIndex identifies a row in the hwVOPSNRMarginConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.1 |
hwVOPSNRMarginConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or
'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPSNRMarginConfProfTable is said to be unreferenced when there is no instance of
hwVOPActSetupNoiseMarginProfId in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.14.1.2 |
hwVOPSNRMarginConfProfDescriptionThe hwVOPSNRMarginConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.14.1.3 |
hwVOPSNRMarginConfProfMinSnrmDsThe minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase
the xTU-C transmit power.
If an increase of xTU-C transmit power is not possible, a loss-of-margin (LOM) defect occurs,
the xTU-R shall fail and attempt to re-initialize and the NMS shall be notified.
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
A value of 0 means that there is no minimum.
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.4 |
hwVOPSNRMarginConfProfMinSnrmUsThe minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase
the xTU-R transmit power.
If an increase of xTU-R transmit power is not possible, a loss-of-margin (LOM) defect occurs,
the xTU-C shall fail and attempt to re-initialize and the NMS shall be notified.
The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
A value of 0 means that there is no minimum.
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.5 |
hwVOPSNRMarginConfProfTargetSnrmDsThe minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement
for each of the downstream bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.6 |
hwVOPSNRMarginConfProfTargetSnrmUsThe minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement
for each of the upstream bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.7 |
hwVOPSNRMarginConfProfMaxSnrmDsThe maximum Noise Margin the xTU-R receiver shall try to sustain.
If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce
the xTU-C transmit power to get a noise margin below this limit (if this functionality is supported).
The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
A value of 0x7FFFFFFF (2147483647) means that there is no maximum.
Unit: 0.1 dB.rw Gauge32 (0..310 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.144.1.1.14.1.8 |
hwVOPSNRMarginConfProfMaxSnrmUsThe maximum Noise Margin the xTU-C receiver shall try to sustain.
If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce
the xTU-R transmit power to get a noise margin below this limit (if this functionality is supported).
The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
A value of 0x7FFFFFFF (2147483647) means that there is no maximum.
Unit: 0.1 dB.rw Gauge32 (0..310 | 2147483647) UNITS "0.1 dB" .1.3.6.1.4.1.2011.6.144.1.1.14.1.9 |
hwVOPSNRMarginConfProfSnrModeDsThis parameter enables the transmitter referred virtual noise in the downstream direction.
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.rw Xdsl2LineSnrMode .1.3.6.1.4.1.2011.6.144.1.1.14.1.10 |
hwVOPSNRMarginConfProfSnrModeUsThis parameter enables the transmitter referred virtual noise in the upstream direction.
The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.rw Xdsl2LineSnrMode .1.3.6.1.4.1.2011.6.144.1.1.14.1.11 |
hwVOPSNRMarginConfProfRaModeDsThe mode of operation of a rate-adaptive xTU-C in the transmit direction.rw Xdsl2RaMode .1.3.6.1.4.1.2011.6.144.1.1.14.1.12 |
hwVOPSNRMarginConfProfRaModeUsThe mode of operation of a rate-adaptive xTU-R in the transmit direction.rw Xdsl2RaMode .1.3.6.1.4.1.2011.6.144.1.1.14.1.13 |
hwVOPSNRMarginConfProfRaUsNrmDsThe Downstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
If the downstream noise margin is above this value, and stays above it for more than the time specified by the
hwVOPSNRMarginConfProfUsTimeDs, the xTU-R shall attempt to increase the downstream net data rate.
The Downstream Up-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.14 |
hwVOPSNRMarginConfProfRaUsNrmUsThe Upstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
If the upstream noise margin is above this value, and stays above it for more than the time specified by the
hwVOPSNRMarginConfProfUsTimeUs, the xTU-C shall attempt to increase the upstream net data rate.
The Upstream Up-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.15 |
hwVOPSNRMarginConfProfRaDsNrmDsThe Downstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
If the downstream noise margin is below this value, and stays below it for more than the time specified by the
hwVOPSNRMarginConfProfDsTimeDs, the xTU-R shall attempt to increase the downstream net data rate.
The Downstream Down-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.16 |
hwVOPSNRMarginConfProfRaDsNrmUsThe Upstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
If the upstream noise margin is below this value, and stays below it for more than the time specified by the
hwVOPSNRMarginConfProfDsTimeUs, the xTU-C shall attempt to increase the upstream net data rate.
The Upstream Down-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
Unit: 0.1 dB.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.17 |
hwVOPSNRMarginConfProfUsTimeDsThe Downstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
The interval of time that the downstream noise margin should stay above the Downstream Up-Shift Noise Margin
before the xTU-R shall attempt to increase the downstream net data rate.
The time interval ranges from 0 to 16383 seconds.
Unit: seconds.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.18 |
hwVOPSNRMarginConfProfUsTimeUsThe Upstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa.
The interval of time the upstream noise margin should stay above the Upstream Up-Shift Noise Margin
before the xTU-C shall attempt to increase the upstream net data rate.
The time interval ranges from 0 to 16383 seconds.
Unit: seconds.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.19 |
hwVOPSNRMarginConfProfDsTimeDsThe Downstream Downshift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa.
The interval of time the downstream noise margin should stay below the Downstream Down-Shift Noise Margin
before the xTU-R shall attempt to decrease the downstream net data rate.
The time interval ranges from 0 to 16383 seconds.
Unit: seconds.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.20 |
hwVOPSNRMarginConfProfDsTimeUsThe Upstream Down-Shift Time Interval, to be used when hwVOPSNRMarginConfProfUsTimeUs is set to dynamicRa.
The interval of time the upstream noise margin should stay below the Upstream Down-Shift Noise Margin
before the xTU-C shall attempt to decrease the upstream net data rate.
The time interval ranges from 0 to 16383 seconds.
Unit: seconds.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.14.1.21 |
hwVOPINPDelayProfileIndexNextThis object contains an appropriate value to be used for hwVOPINPDelayConfProfIndex
when creating entries in the hwVOPINPDelayConfProfTableTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPINPDelayConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.15 |
hwVOPINPDelayConfProfTableThe INP-Delay parameters for each pair of upstream and downstream channels will be in
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
INP-Delay Profiles. If less than the maximum number of channels is to be used then the
scalars corresponding to non-required channels MUST be set to a null value (0).
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPINPDelayConfProfIndex. SEQUENCE OF HWVOPINPDelayConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.16 |
hwVOPINPDelayConfProfEntryThe INP-Delay parameters for each pair of upstream and downstream channels will be in
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
INP-Delay Profiles. If less than the maximum number of channels is to be used then the
scalars corresponding to non-required channels MUST be set to a null value (0).
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPINPDelayConfProfIndex. HWVOPINPDelayConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.16.1 |
hwVOPINPDelayConfProfIndexThe hwVOPINPDelayConfProfIndex identifies a row in the hwVOPINPDelayConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.1 |
hwVOPINPDelayConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy'
or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPINPDelayConfProfTable is said to be unreferenced when there is no instance of
hwVOPActSetupInpDelayProfId1-4 in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.16.1.2 |
hwVOPINPDelayConfProfDescriptionThe hwVOPINPDelayConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.16.1.3 |
hwVOPINPDelayConfProfMinProtectionDsIf retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing
of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
and can take the values 1/2 and any integer from 0 to 16, inclusive.
If the xTU does not support the configured INPMIN value,it shall use the nearest supported impulse noise protection
greater than INPMIN.
Unit: symbols.rw Xdsl2SymbolProtection UNITS "symbols" .1.3.6.1.4.1.2011.6.144.1.1.16.1.4 |
hwVOPINPDelayConfProfMinProtection8DsIf retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise
protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing
of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
and can take any integer value from 0 to 16, inclusive.
Unit: symbols.rw Xdsl2SymbolProtection8 UNITS "symbols" .1.3.6.1.4.1.2011.6.144.1.1.16.1.5 |
hwVOPINPDelayConfProfMaxDelayDsIf retransmission is not used in downstream direction, this parameter is the maximum one-way
interleaving delay introduced by the PMS-TC on downstream direction.
The xTUs shall choose the S (factor) and D(depth) values such that the actual one-way
interleaving delay (Xdsl2ChStatusActDelay - VDSL2-LINE-MIB) is as close as possible to,
but less than or equal to hwVOPINPDelayConfProfMaxDelayDs.
The delay is coded in ms, with the value 0 indicating no delay bound is being imposed.
The delay is coded in ms, with the special values 0, 1 and 255.
- The value 0 indicates no delay bound is being imposed.
- The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode
and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3
and G.992.4 operating modes (G.997.1 special value S1).
- The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2).
Unit: milliseconds.rw Gauge32 (0..63 | 255) UNITS "milliseconds" .1.3.6.1.4.1.2011.6.144.1.1.16.1.6 |
hwVOPINPDelayConfProfMinProtectionUsIf retransmission is not used in upstream direction, this parameter specifies the minimum
impulse noise protection for the upstream bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols
with a subcarrier spacing of 4.3125 kHz and can take the values 1/2 and any integer from 0 to 16,
inclusive.
If the xTU does not support the configured INPMIN value, it shall use the nearest supported impulse
noise protection greater than INPMIN.
Unit: symbols.rw Xdsl2SymbolProtection UNITS "symbols" .1.3.6.1.4.1.2011.6.144.1.1.16.1.7 |
hwVOPINPDelayConfProfMinProtection8UsIf retransmission is not used in upstream direction, this parameter specifies the minimum
impulse noise protection for the upstream bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols
with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 16, inclusive.
Unit: symbols.rw Xdsl2SymbolProtection8 UNITS "symbols" .1.3.6.1.4.1.2011.6.144.1.1.16.1.8 |
hwVOPINPDelayConfProfMaxDelayUsIf retransmission is not used in upstream direction, this parameter is the maximum one-way
interleaving delay introduced by the PMS-TC on upstream direction.
The xTUs shall choose the S (factor) and D(depth) values such that the actual one-way
interleaving delay (Xdsl2ChStatusActDelay - VDSL2-LINE-MIB) is as close as possible to,
but less than or equal to hwVOPINPDelayConfProfMaxDelayUs.
The delay is coded in ms, with the value 0 indicating no delay bound is being imposed.
The delay is coded in ms, with the special values 0, 1 and 255.
- The value 0 indicates no delay bound is being imposed.
- The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode
and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3
and G.992.4 operating modes (G.997.1 special value S1).
- The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2).
Unit: milliseconds.rw Gauge32 (0..63 | 255) UNITS "milliseconds" .1.3.6.1.4.1.2011.6.144.1.1.16.1.9 |
hwVOPINPDelayConfProfMaxDelayVarThis optional VDSL2 specific parameter specifies the maximum value
for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1 to 25.4 milliseconds)
with the special value 255 which indicates that no delay variation bound is imposed.
Unit: 0.1 milliseconds.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.10 |
hwVOPINPDelayConfProfInitPolicyIf retransmission is not used in a given transmit direction, this parameter indicates
which policy shall be applied to determine the transceiver configuration parameters at
initialization. The valid values for CIPOLICY are 0,1 and 2.
Those policies are defined in the respective Recommendations.rw Xdsl2ChInitPolicy .1.3.6.1.4.1.2011.6.144.1.1.16.1.11 |
hwVOPINPDelayConfProfMaxDelayRtxDsIf retransmission is used in downstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms.
Unit: millisecondsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.12 |
hwVOPINPDelayConfProfMaxDelayRtxUsIf retransmission is used in upstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms.
Unit: millisecondsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.13 |
hwVOPINPDelayConfProfMinDelayRtxDsIf retransmission is used in downstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms.
Unit: millisecondsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.14 |
hwVOPINPDelayConfProfMinDelayRtxUsIf retransmission is used in upstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms.
Unit: millisecondsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.15 |
hwVOPINPDelayConfProfMinInpShineRtxDsIf retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
and can take any integer value from 0 to 63, inclusive.
Unit: symbolsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.16 |
hwVOPINPDelayConfProfMinInpShineRtxUsIf retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
and can take any integer value from 0 to 63, inclusive.
Unit: symbolsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.17 |
hwVOPINPDelayConfProfMinInp8ShineRtxDsIf retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
and can take any integer value from 0 to 127, inclusive.
Unit: symbolsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.18 |
hwVOPINPDelayConfProfMinInp8ShineRtxUsIf retransmission is used in upstream direction, this parameter specifies the
minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
and can take any integer value from 0 to 127, inclusive.
Unit: symbolsrw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.19 |
hwVOPINPDelayConfProfShineRatioRtxDsIf retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.001.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.20 |
hwVOPINPDelayConfProfShineRatioRtxUsIf retransmission is used in upstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.001.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.21 |
hwVOPINPDelayConfProfMinInpReinRtxDsIf retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
and can take any integer value from 0 to 7, inclusive.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.22 |
hwVOPINPDelayConfProfMinInpReinRtxUsIf retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz
and can take any integer value from 0 to 7, inclusive.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.23 |
hwVOPINPDelayConfProfMinInp8ReinRtxDsIf retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
and can take any integer value from 0 to 13, inclusive.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.24 |
hwVOPINPDelayConfProfMinInp8ReinRtxUsIf retransmission is used in upstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse
noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz
and can take any integer value from 0 to 13, inclusive.rw Gauge32 .1.3.6.1.4.1.2011.6.144.1.1.16.1.25 |
hwVOPINPDelayConfProfIatReinRtxDsIf retransmission is used in downstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz
2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hzrw Enumeration .1.3.6.1.4.1.2011.6.144.1.1.16.1.26 |
hwVOPINPDelayConfProfIatReinRtxUsIf retransmission is used in upstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz
2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hzrw Enumeration .1.3.6.1.4.1.2011.6.144.1.1.16.1.27 |
hwVOPVirtualNoiseProfileIndexNextThis object contains an appropriate value to be used for hwVOPVirtualNoiseConfProfIndex
when creating entries in the hwVOPVirtualNoiseConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPVirtualNoiseConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.17 |
hwVOPVirtualNoiseConfProfTableThe Virtual Noise Profile MUST contain the virtual noise PSDs.
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
hwVOPSNRMarginConfProfRaModeUs) are set to 0.
The SNRMODE parameters for upstream and downstream are in the hwVOPSNRMarginConfProfTable.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPVirtualNoiseConfProfIndex. SEQUENCE OF HWVOPVirtualNoiseConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.18 |
hwVOPVirtualNoiseConfProfEntryThe Virtual Noise Profile MUST contain the virtual noise PSDs.
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
hwVOPSNRMarginConfProfRaModeUs) are set to 0.
The SNRMODE parameters for upstream and downstream are in the hwVOPSNRMarginConfProfTable.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPVirtualNoiseConfProfIndex. HWVOPVirtualNoiseConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.18.1 |
hwVOPVirtualNoiseConfProfIndexThe hwVOPVirtualNoiseConfProfIndex identifies a row in the hwVOPVirtualNoiseConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.18.1.1 |
hwVOPVirtualNoiseConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy'
or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPVirtualNoiseConfProfTable is said to be unreferenced when there is no instance of
hwVOPActSetupVNoiseProfId in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.18.1.2 |
hwVOPVirtualNoiseConfProfDescriptionThe hwVOPVirtualNoiseConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.18.1.3 |
hwVOPVirtualNoiseConfProfTxRefVnDsThis configuration parameter defines the downstream transmitter referred virtual noise.
The TXREFVNds shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, with a subcarrier spacing of 4.3125 kHz,
and a noise PSD level (expressed in dBm/Hz) at that subcarrier.
The set of breakpoints can then be represented as: [(t1,PSD1), (t2, PSD2), ... , (tN, PSDN)].
32 groups can be configured at most, and 3 bytes for each group. The first two bytes represent tone index,
the 3th byte represents the configured PSD value. The relation between configured PSD value and real PSD
value is: REAL PSD = (CONFIGURED PSD + 80) * (-0.5dBm/Hz).rw Xdsl2LineTxRefVnDs .1.3.6.1.4.1.2011.6.144.1.1.18.1.4 |
hwVOPVirtualNoiseConfProfTxRefVnUsThis configuration parameter defines the upstream transmitter referred virtual noise.
The TXREFVNus shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, with a subcarrier spacing of 4.3125 kHz,
and a noise PSD level (expressed in dBm/Hz) at that subcarrier.
The set of breakpoints can then be represented as: [(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)].
16 groups can be configured at most, and 3 bytes for each group. The first two bytes represent tone index,
the 3th byte represents the configured PSD value. The relation between configured PSD value and real PSD
value is: REAL PSD = (CONFIGURED PSD + 80) * (-0.5dBm/Hz).rw Xdsl2LineTxRefVnUs .1.3.6.1.4.1.2011.6.144.1.1.18.1.5 |
hwVOPINMProfileIndexNextThis object contains an appropriate value to be used for hwVOPINMConfProfIndex
when creating entries in the hwVOPINMConfProfTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPINMConfProfIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPProfileIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.1.19 |
hwVOPINMConfProfTableImpulse Noise Monitoring(INM) is not required for modem operation but is a capability for
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
function on the receive direction in the xTU. A downstream Impulse Noise Monitor applies
to the xTU-R; an upstream Impulse Noise Monitor applies to the xTU-C.
If INM is not implemented, the relevant profile pointer within the xDSL Line Configuration
Vector instance MUST be set to a null value(0).
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPINMConfProfIndex. SEQUENCE OF HWVOPINMConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.20 |
hwVOPINMConfProfEntryImpulse Noise Monitoring(INM) is not required for modem operation but is a capability for
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
function on the receive direction in the xTU. A downstream Impulse Noise Monitor applies
to the xTU-R; an upstream Impulse Noise Monitor applies to the xTU-C.
If INM is not implemented, the relevant profile pointer within the xDSL Line Configuration
Vector instance MUST be set to a null value(0).
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this entry is hwVOPINMConfProfIndex. HWVOPINMConfProfEntry .1.3.6.1.4.1.2011.6.144.1.1.20.1 |
hwVOPINMConfProfIndexThe hwVOPINMConfProfIndex identifies a row in the hwVOPINMConfProfTable. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.1 |
hwVOPINMConfProfRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting this object to 'active'.
Before a profile can be deleted or taken out of service (by setting this object to 'destroy'
or 'notInService'), it MUST be first unreferenced from all associated DSL lines.
A row in hwVOPINMConfProfTable is said to be unreferenced when there is no instance of
hwVOPActSetupVNoiseProfId in the hwVOPActSetupTable which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.1.20.1.2 |
hwVOPINMConfProfDescriptionThe hwVOPINMConfProfDescription contains an optional human readable description for the profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.1.20.1.3 |
hwVOPINMConfProfInmIatoDsThe parameter of downstream impulse noise monitoring inter arrival time offset.
This is the Inter Arrival Time Offset that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IAT is reported.
The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.4 |
hwVOPINMConfProfInmIatsDsThe parameter of downstream impulse noise monitoring inter arrival time step.
This is the Inter Arrival Time Step that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IAT is reported.
The valid values for INMIATS ranges from 0 to 7 in steps of 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.5 |
hwVOPINMConfProfInmCcDsThe parameter of Downstream impulse noise monitoring cluster continuation value.
This is the Cluster Continuation value that the xTU receiver shall use
in the cluster indication process described in the relevant ITU-T Recommendation.
The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.6 |
hwVOPINMConfProfInmInpeqModeDsThe parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode.
This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP,
as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.7 |
hwVOPINMConfProfInmIatoUsThe parameter of upstream impulse noise monitoring inter arrival time offset.
This is the Inter Arrival Time Offset that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IAT is reported.
The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.8 |
hwVOPINMConfProfInmIatsUsThe parameter of upstream impulse noise monitoring inter arrival time step.
This is the Inter Arrival Time Step that the xTU receiver shall use to determine
in which bin of the Inter Arrival Time histogram the IAT is reported.
The valid values for INMIATS ranges from 0 to 7 in steps of 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.9 |
hwVOPINMConfProfInmCcUsThe parameter of upstream impulse noise monitoring cluster continuation value.
This is the Cluster Continuation value that the xTU receiver shall use
in the cluster indication process described in the relevant ITU-T Recommendation.
The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.10 |
hwVOPINMConfProfInmInpeqModeUsThe parameter of upstream impulse noise monitoring equivalent impulse noise protect mode.
This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP,
as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.1.20.1.11 |
hwVOPVectors OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.1.2 |
hwVOPGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.1.2.1 |
hwVOPGlobalAttachmentMethodCapabiltiesThis object reflects the VoP attachment-method(s) this Network Element supports.
Two attachment methods, 'direct' and 'indirect' are available and each Network
Element MAY be able to support both attachment-methods (but not at the same time).
The capability to support a specific attachment-method is indicated by the respective
bit-position set to '1'. Particularly, a network element that supports both methods
SHOULD indicate that by both bit-positions set to '1'.ro HWVOPAttachmentMethods .1.3.6.1.4.1.2011.6.144.1.2.1.1 |
hwVOPGlobalAttachmentMethodConfiguredThis object configures the VoP attachment-method to be used by this Network Element.
Two attachment methods, 'direct' and 'indirect' are available and only one method can be selected at any time.
To select a specific attachment-method the management system SHOULD set the respective bit-position to '1'.
Changing the requested attachment-method may implies a system reboot.
The value of this object MUST be maintained in a persistent manner.
In case the selected attachment-method is not supported by the network element or if the management system tries
to configure both methods simultaneously the SNMP SET operation SHOULD be rejected by the network element.
Default value is 1(direct).rw HWVOPAttachmentMethods .1.3.6.1.4.1.2011.6.144.1.2.1.2 |
hwVOPGlobalAttachmentMethodCurrentThis object reflects the VoP attachment-method currently used by this Network Element.
Two attachment methods, 'direct' and 'indirect' are available and only one method
can be used at any time. The specific attachment-method used is indicated by the respective bit-position set to '1'.
Changing the requested attachment-method may implies a system reboot.ro HWVOPAttachmentMethods .1.3.6.1.4.1.2011.6.144.1.2.1.3 |
hwVOPSetup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.1.2.2 |
hwVOPSetupProfileIndexNextThis object is required only in case the 'indirect' attachment-method of VoP to xDSL lines is implemented,
in which case entries/rows in hwVOPSetupTable are dynamically created and deleted by the management system.
When implemented, the object reports an appropriate value to be used for hwVOPSetupIndex
when creating entries in the hwVOPSetupTable.
The value '0' indicates that no unassigned entries are available.
To obtain the value of hwVOPSetupIndex for a new entry in the table,
the manager issues a management protocol retrieval operation.
The agent will determine through its local policy when this index value will be made available for reuse.ro HWVOPSetupIndexOrZeroType .1.3.6.1.4.1.2011.6.144.1.2.2.1 |
hwVOPSetupTableThis table contains a collection of profile indices that construct a Vector Of Profiles (VoP).
This table is used in both 'direct' and 'indirect' attachment-methods of VoP to xDSL lines.
In case the implementation uses 'direct' attachment-method of configuration VoP to xDSL lines then:
1) a row in this table is automatically created and deleted by the SNMP agent
together with creating a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
2) The row index is same as the index of the respective row in xdsl2LineTable.
Thus, this table can be considered as extending the xdsl2LineTable.
3) The row status object (hwVOPSetupRowStatus) and profile description(hwVOPSetupDescription) are unused.
4) The management system may modify the contents of each row in the table and, by that,
modify the required configuration VoP for the related xDSL line.
5) Note that the hwVOPActSetupTable reflects the configuration VoP currently used by each xDSL line.
Its importance is demonstrated during the time between modifying the configuration VoP
of any xDSL line and practically applying it to the xDSL line.
In case the implementation uses 'direct' attachment-method of VoP to xDSL lines then a row in the table
is automatically created by the SNMP agent when a respective row is created in the xdsl2LineTable.
The row objects will be set to default values.
In case the implementation uses 'indirect' attachment-method of VoP to xDSL lines then a default profile
with an index number 1 will always exist and its objects will be set to default values.
The index of this table is hwVOPSetupIndex. SEQUENCE OF HWVOPSetupEntry .1.3.6.1.4.1.2011.6.144.1.2.2.2 |
hwVOPSetupEntryThis table contains a collection of profile indices that construct a Vector Of Profiles (VoP).
This table is used in both 'direct' and 'indirect' attachment-methods of VoP to xDSL lines.
In case the implementation uses 'direct' attachment-method of configuration VoP to xDSL lines then:
1) a row in this table is automatically created and deleted by the SNMP agent
together with creating a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
2) The row index is same as the index of the respective row in xdsl2LineTable.
Thus, this table can be considered as extending the xdsl2LineTable.
3) The row status object (hwVOPSetupRowStatus) and profile description(hwVOPSetupDescription) are unused.
4) The management system may modify the contents of each row in the table and, by that,
modify the required configuration VoP for the related xDSL line.
5) Note that the hwVOPActSetupTable reflects the configuration VoP currently used by each xDSL line.
Its importance is demonstrated during the time between modifying the configuration VoP
of any xDSL line and practically applying it to the xDSL line.
In case the implementation uses 'direct' attachment-method of VoP to xDSL lines then a row in the table
is automatically created by the SNMP agent when a respective row is created in the xdsl2LineTable.
The row objects will be set to default values.
In case the implementation uses 'indirect' attachment-method of VoP to xDSL lines then a default profile
with an index number 1 will always exist and its objects will be set to default values.
The index of this entry is hwVOPSetupIndex. HWVOPSetupEntry .1.3.6.1.4.1.2011.6.144.1.2.2.2.1 |
hwVOPSetupIndexThe hwVOPSetupIndex identifies a row in the hwVOPSetupTable.
A row in this table may be indexed either by an ifIndex pattern, in case the 'direct'
attachment-method of VoP to xDSL rows is implemented, or by a unique ordered number,
in case the 'indirect' attachment-method of VoP to xDSL rows is implemented. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.1 |
hwVOPSetupRowStatusThis object is used, in case the 'indirect' attachment-method of VoP to xDSL lines is implemented,
to create a new row, to modify a row, or delete an existing row in this table.
In case the 'direct' attachment-method of VoP to xDSL lines is implemented then rows in this table
are automatically created and deleted by the embedded system and this object is not implemented/used.
When the object is being used, as described above, rows in this table are dynamically created,
modified and deleted by the management system.
When the object is being used then before a row in this table can be deleted or
taken out of service (by setting this object to 'destroy' or 'notInService'), it MUST be first
un-referenced from all associated xDSL lines.
A row in voSetupTable is said to be not referenced when there is no instance
of xdsl2LineTable (VDSL2-LINE-MIB) which refers to the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.2 |
hwVOPSetupDescriptionThe hwVOPSetupDescription contains an optional human readable description for the profile.
This object is more likely to be used in case the 'indirect' attachment-method of VoP
to xDSL lines is implemented.
However, if implemented in 'direct' attachment-method of VoP to xDSL lines
then this object has read-write accessibility.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.3 |
hwVOPSetupUsDataRateProfId1This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #1.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.4 |
hwVOPSetupUsRaRatio1Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #1
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupUsRaRatio1 is the ratio of excess data rate to
be assigned to all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.5 |
hwVOPSetupDsDataRateProfId1This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.6 |
hwVOPSetupDsRaRatio1Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #1
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupDsRaRatio1 is the ratio of excess data rate to
be assigned to all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.7 |
hwVOPSetupInpDelayProfId1This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.8 |
hwVOPSetupUsDataRateProfId2This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.9 |
hwVOPSetupUsRaRatio2Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #2
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupUsRaRatio2 is the ratio of excess data rate to
be assigned to all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.10 |
hwVOPSetupDsDataRateProfId2This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.11 |
hwVOPSetupDsRaRatio2Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #2
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupDsRaRatio2 is the ratio of excess data rate to
be assigned to all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.12 |
hwVOPSetupInpDelayProfId2This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2.
If channel #2 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.13 |
hwVOPSetupUsDataRateProfId3This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #3.
If channel #3 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.14 |
hwVOPSetupUsRaRatio3Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #3
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupUsRaRatio3 is the ratio of excess data rate to
be assigned to all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.15 |
hwVOPSetupDsDataRateProfId3This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #3.
If channel #3 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.16 |
hwVOPSetupDsRaRatio3Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #3
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupDsRaRatio3 is the ratio of excess data rate to
be assigned to all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.17 |
hwVOPSetupInpDelayProfId3This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #3.
If channel #3 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.18 |
hwVOPSetupUsDataRateProfId4This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #4.
If channel #4 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.19 |
hwVOPSetupUsRaRatio4Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #4
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupUsRaRatio4 is the ratio of excess data rate to
be assigned to all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.20 |
hwVOPSetupDsDataRateProfId4This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #4.
If channel #4 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.21 |
hwVOPSetupDsRaRatio4Rate Adaptation Ratio.
The ratio (in %) that should be taken into account for the bearer channel #4
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPSetupDsRaRatio4 is the ratio of excess data rate to
be assigned to all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.22 |
hwVOPSetupInpDelayProfId4This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #4.
If channel #4 is not being used this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.23 |
hwVOPSetupLSpectrumProfIdThis object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.24 |
hwVOPSetupUpboProfIdThis object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.25 |
hwVOPSetupDpboProfIdThis object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.26 |
hwVOPSetupRfiProfIdThis object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.27 |
hwVOPSetupNoiseMarginProfIdThis object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.28 |
hwVOPSetupVNoiseProfIdThis object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.29 |
hwVOPSetupInmProfIdThis object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.30 |
hwVOPSetupUsDataRateProf1DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #1.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.31 |
hwVOPSetupDsDataRateProf1DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.32 |
hwVOPSetupInpDelayProf1DescriptionThis object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.33 |
hwVOPSetupUsDataRateProf2DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object should be set to a zero length string.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.34 |
hwVOPSetupDsDataRateProf2DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object should be set to a zero length string.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.35 |
hwVOPSetupInpDelayProf2DescriptionThis object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2.
If channel #2 is not being used this object should be set to a zero length string.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.36 |
hwVOPSetupLSpectrumProfDescriptionThis object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.37 |
hwVOPSetupUpboProfDescriptionThis object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support this object should be set to 0.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.38 |
hwVOPSetupDpboProfDescriptionThis object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.39 |
hwVOPSetupRfiProfDescriptionThis object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.40 |
hwVOPSetupNoiseMarginProfDescriptionThis object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.41 |
hwVOPSetupVNoiseProfDescriptionThis object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.42 |
hwVOPSetupInmProfDescriptionThis object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.
This object has read-write accessibility if 'direct' attachment-method of VoP to xDSL lines is implemented.rw OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.2.1.43 |
hwVOPActSetupTableThis read-only table contains groups of profile indices actually attached to any xDSL line in the system.
Each group of profile indices constructs a Vector Of Profiles (VoP).
1) A row in this table is automatically created or deleted by the SNMP agent together
with creating or deleting a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
2) The row index is same as the index of the respective row in xdsl2LineTable.
Thus, this table can be considered as extending the xdsl2LineTable.
This table is mandatory in 'direct' attachment-method of VoP to xDSL lines
but can optionally be implemented in 'indirect' attachment-method.
The objects in this table reflect the actual configuration VoP of the respective xDSL line.
A row in the table is automatically created by the SNMP agent when a respective row is created
in the xdsl2LineTable. Implementing this table is mandatory in case the implementation
uses 'direct' attachment-method of VoP to xDSL lines.
Implementation is optional in case of 'indirect' attachment-method.
The index of this table is hwVOPActSetupIndex. SEQUENCE OF HWVOPActSetupEntry .1.3.6.1.4.1.2011.6.144.1.2.2.3 |
hwVOPActSetupEntryThis read-only table contains groups of profile indices actually attached to any xDSL line in the system.
Each group of profile indices constructs a Vector Of Profiles (VoP).
1) A row in this table is automatically created or deleted by the SNMP agent together
with creating or deleting a row in the xdsl2LineTable (VDSL2-LINE-MIB) for any xDSL line.
2) The row index is same as the index of the respective row in xdsl2LineTable.
Thus, this table can be considered as extending the xdsl2LineTable.
This table is mandatory in 'direct' attachment-method of VoP to xDSL lines
but can optionally be implemented in 'indirect' attachment-method.
The objects in this table reflect the actual configuration VoP of the respective xDSL line.
A row in the table is automatically created by the SNMP agent when a respective row is created
in the xdsl2LineTable. Implementing this table is mandatory in case the implementation
uses 'direct' attachment-method of VoP to xDSL lines.
Implementation is optional in case of 'indirect' attachment-method.
The index of this entry is hwVOPActSetupIndex. HWVOPActSetupEntry .1.3.6.1.4.1.2011.6.144.1.2.2.3.1 |
hwVOPActSetupIndexThe hwVOPActSetupIndex identifies a row in this table. A row in this table is indexed by an ifIndex pattern. Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.1 |
hwVOPActSetupUsDataRateProfId1This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel number #1.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.2 |
hwVOPActSetupUsRaRatio1Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #1
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupUsRaRatio1 is the ratio of excess data rate assigned to
all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.3 |
hwVOPActSetupDsDataRateProfId1This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.4 |
hwVOPActSetupDsRaRatio1Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #1
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupDsRaRatio1 is the ratio of excess data rate assigned to
all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.5 |
hwVOPActSetupInpDelayProfId1This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.6 |
hwVOPActSetupUsDataRateProfId2This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.
If channel #2 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.7 |
hwVOPActSetupUsRaRatio2Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #2
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupUsRaRatio2 is the ratio of excess data rate assigned to
all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.8 |
hwVOPActSetupDsDataRateProfId2This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.
If channel #2 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.9 |
hwVOPActSetupDsRaRatio2Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #2
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupDsRaRatio2 is the ratio of excess data rate assigned to
all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.10 |
hwVOPActSetupInpDelayProfId2This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2
If channel #2 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.11 |
hwVOPActSetupUsDataRateProfId3This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #3.
If channel #3 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.12 |
hwVOPActSetupUsRaRatio3Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #3
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupUsRaRatio3 is the ratio of excess data rate assigned to
all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.13 |
hwVOPActSetupDsDataRateProfId3This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #3.
If channel #3 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.14 |
hwVOPActSetupDsRaRatio3Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #3
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupDsRaRatio3 is the ratio of excess data rate assigned to
all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.15 |
hwVOPActSetupInpDelayProfId3This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #3
If channel #3 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.16 |
hwVOPActSetupUsDataRateProfId4This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #4.
If channel #4 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.17 |
hwVOPActSetupUsRaRatio4Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #4
when performing rate adaptation on upstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupUsRaRatio4 is the ratio of excess data rate assigned to
all other bearer channels on upstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.18 |
hwVOPActSetupDsDataRateProfId4This object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #4.
If channel #4 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.19 |
hwVOPActSetupDsRaRatio4Rate Adaptation Ratio.
The ratio (in %) that is taken into account for the bearer channel #4
when performing rate adaptation on downstream.
The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels.
Also, the 100 - hwVOPActSetupDsRaRatio4 is the ratio of excess data rate assigned to
all other bearer channels on downstream direction.
The sum of rate adaptation ratios over all bearers on the same direction is equal to 100%.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.20 |
hwVOPActSetupInpDelayProfId4This object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #4
If channel #4 is not being used this object is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.21 |
hwVOPActSetupLSpectrumProfIdThis object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.22 |
hwVOPActSetupNoiseMarginProfIdThis object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.23 |
hwVOPActSetupVNoiseProfIdThis object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.24 |
hwVOPActSetupUpboProfIdThis object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support this object should be set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.25 |
hwVOPActSetupDpboProfIdThis object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.26 |
hwVOPActSetupRfiProfIdThis object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.27 |
hwVOPActSetupInmProfIdThis object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.ro Unsigned32 .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.28 |
hwVOPActSetupUsDataRateProf1DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel number #1.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.29 |
hwVOPActSetupDsDataRateProf1DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #1.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.30 |
hwVOPActSetupInpDelayProf1DescriptionThis object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #1.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.31 |
hwVOPActSetupUsDataRateProf2DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the upstream transmission direction of channel #2.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.32 |
hwVOPActSetupDsDataRateProf2DescriptionThis object identifies a row in hwVOPDataRateConfProfTable used for
configuring the downstream transmission direction of channel #2.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.33 |
hwVOPActSetupInpDelayProf2DescriptionThis object identifies a row in hwVOPINPDelayConfProfTable used for
configuring the INP-Delay parameters of channel #2ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.34 |
hwVOPActSetupLSpectrumProfDescriptionThis object identifies a row in hwVOPLineSpectrumConfProfTable used for
configuring the spectrum parameters of the respective xDSL line.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.35 |
hwVOPActSetupUpboProfDescriptionThis object identifies a row in hwVOPUPBOConfProfTable used for
configuring the upstream power back-off related parameters of the respective xDSL line.
If this leaf is not support this object should be set to 0.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.36 |
hwVOPActSetupDpboProfDescriptionThis object identifies a row in hwVOPDPBOConfProfTable used for
configuring the downstream power back-off related parameters of the respective xDSL line.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.37 |
hwVOPActSetupRfiProfDescriptionThis object identifies a row in hwVOPRFIConfProfTable used for
configuring the RFI notches related parameters of the respective xDSL line.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.38 |
hwVOPActSetupNoiseMarginProfDescriptionThis object identifies a row in hwVOPSNRMarginConfProfTable used for
configuring the noise margin related parameters of the respective xDSL line.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.39 |
hwVOPActSetupVNoiseProfDescriptionThis object identifies a row in hwVOPVirtualNoiseConfProfTable used for
configuring the virtual noise related parameters of the respective xDSL line.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.40 |
hwVOPActSetupInmProfDescriptionThis object identifies a row in hwVOPINMConfProfTable used for
configuring the impulse noise monitoring parameters of the respective xDSL line.ro OCTET STRING .1.3.6.1.4.1.2011.6.144.1.2.2.3.1.41 |
hwVOPConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.2 |
hwVOPGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.2.1 |
hwVOPTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.3 |
hwVOPCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.3.1 |
hwVOPXdslPortTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.3.1.1 |
hwVOPProfileIDChangeTrapThe profile ID bound by the port change.
1. hwConfigChangeIP
2. ifIndex-the index of the xDSL interface.
3. hwVOPDataRateConfProfIndex
configuring the downstream transmission direction of channel #1.
4. hwVOPDataRateConfProfDescription-the data-rate profile description used for
configuring the downstream transmission direction of channel #1.
5. hwVOPDataRateConfProfIndex
configuring the upstream transmission direction of channel #1.
6. hwVOPDataRateConfProfDescription
configuring the upstream transmission direction of channel #1.
7. hwVOPINPDelayConfProfIndex
8. hwVOPINPDelayConfProfDescription
9. hwVOPDataRateConfProfIndex
configuring the downstream transmission direction of channel #2.
10.hwVOPDataRateConfProfDescription
configuring the downstream transmission direction of channel #2.
11.hwVOPDataRateConfProfIndex
configuring the upstream transmission direction of channel #2.
12.hwVOPDataRateConfProfDescription
configuring the upstream transmission direction of channel #2.
13.hwVOPINPDelayConfProfIndex
14.hwVOPINPDelayConfProfDescription
15.hwVOPDPBOConfProfIndex
16.hwVOPDPBOConfProfProfDescription
17.hwVOPUPBOConfProfIndex
18.hwVOPUPBOConfProfDescription
19.hwVOPLineSpectrumConfProfIndex
20.hwVOPLineSpectrumConfProfDescription
21.hwVOPRFIConfProfIndex
22.hwVOPRFIConfProfDescription
23.hwVOPSNRMarginConfProfIndex
24.hwVOPSNRMarginConfProfDescription
25.hwVOPVirtualNoiseConfProfIndex
26.hwVOPVirtualNoiseConfProfDescription
27.hwVOPINMConfProfIndex
28.hwVOPINMConfProfDescription NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.144.3.1.1.1 |
hwVOPAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.144.3.2 |