HUAWEI-VOICEUSER-MIB
AI MIB Summary
The HUAWEI-VOICEUSER-MIB enables SNMP-based monitoring and management of voice user sessions and associated state metrics on Huawei voice gateways and softswitches. It facilitates the tracking of active call registrations, user authentication status, and session resource utilization to support real-time voice service availability and capacity planning.
This MIB module defines MIB objects which provides voice user management.
Main OID:
hwIASVoiceUser.1.3.6.1.4.1.2011.6.112
309
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
309 total| Object Name |
|---|
hwIASVoiceUserThis MIB module defines MIB objects which provides voice user management. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.112 |
hwIASVoiceUserObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.1 |
hwPstnCTPConfigTableThis table is used to add, delete, modify, and query the PSTN user.
The index of this table is hwPstnCTPConfigIndex.
The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user. SEQUENCE OF HwPstnCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.1 |
hwPstnCTPConfigEntryThis table is used to add, delete, modify, and query the PSTN user.
The index of this entry is hwPstnCTPConfigIndex.
The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user. HwPstnCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.1.1 |
hwPstnCTPConfigIndexIndicates the frame/slot/port.
24 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for PSTN port, must be 0x18
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.1 |
hwPstnCTPMgIdIndicates the MG ID.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.2 |
hwPstnCTPTerminationIDIndicates the terminal ID (only the character string of digit type is supported).rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.1.1.3 |
hwPstnCTPTelNoIndicates the telephone number.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.1.1.4 |
hwPstnCTPRowStatusIndicates the row status.The operations include activate, shut down, not start, create and register, create and wait, and delete. The operations are not used in the V8R61.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.112.1.1.1.5 |
hwPstnCTPLayerFlagIndicates whether to layer.
Options:
1. noLayer(1) -not to layer
2. layer(2) -to layer
3. null(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.6 |
hwPstnCTPPriorityFlagIndicates the priority of the terminal.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priorityrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.7 |
hwPstnCTPPotsLineTypeIndicates the subscriber type.
Options:
1. del(1) -DEL
2. lcPBX(2) -Loop Calling PBX
3. ecPBX(3) -earth calling PBX
4. payPhone(4) -PayPhonerw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.8 |
hwPstnCTPDCTimeIndicates the disconnect clear interval.
Unit: 10msrw Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.9 |
hwPstnCTPFSKDelayIntervalIndicates the FSK delay interval.
Unit: 10msrw Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.10 |
hwPstnCTPCidTransWhenIndicates the time for delivering the caller ID.
Options:
1. afterRing(1) -transmit CID after ringing
2. beforeRing(2) -transmit CID before ringingrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.11 |
hwPstnCTPCidFormatIndicates the format of the caller ID.
Options:
1. sdmfFsk(1) -SDMF FSK format
2. mdmfFsk(2) -MDMF FSK format
3. dtmf(3) -DTMF format
4. russia(4) -russia format
5. etsi(5) -etsi formatrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.12 |
hwPstnCTPVQEAgcIndicates enable AGC or not.
Options:
1. enable(1) -enable AGC
2. disable(2) -disable AGCrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.13 |
hwPstnCTPVQESnsIndicates enable SNS or not.
Options:
1. enable(1) -enable SNS
2. disable(2) -disable SNSrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.14 |
hwPstnCTPVQEAgcLevelIndicates set AGC target value.
Unit: dbm0rw Integer32(-24..-9) .1.3.6.1.4.1.2011.6.112.1.1.1.15 |
hwPstnCTPVQESnsLevelIndicates set VQE noise suppression level.
Unit: dbrw Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.16 |
hwPstnCTPDspInputGainDsp input gain.
1: -10db
2: -9db
3: -8db
4: -7db
5: -6db
6: -5db
7: -4db
8: -3db
9: -2db
10: -1db
11: 0db
12: 1db
13: 2db
14: 3db
15: 4db
16: 5db
Unit: dbrw Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.17 |
hwPstnCTPDspOutputGainDsp output gain.
1: -10db
2: -9db
3: -8db
4: -7db
5: -6db
6: -5db
7: -4db
8: -3db
9: -2db
10: -1db
11: 0db
12: 1db
13: 2db
14: 3db
15: 4db
16: 5db
17: 6db
18: 7db
19: 8db
20: 9db
21: 10db
Unit: dbrw Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.18 |
hwPstnCTPDetectANSbarBySingleToneFlagIt indicates whether the ANSbar signal detected by SingleTone is supported.
Options:
1. enable(1) -the ANSbar signal detected by SingleTone is supported
2. disable(2) -the ANSbar signal detected by SingleTone is not supportedrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.19 |
hwPstnCTPBellANSFlagIt indicates whether the Bell ANS is supported.
Options:
1. enable(1) -the Bell ANS is supported
2. disable(2) -the Bell ANS is not supportedrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.20 |
hwPstnCTPDspParaTemplateThe index of dsp parameter template name.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.1.1.21 |
hwPstnCTPCidFskModeIt indicates the mode of fsk.
Options:
1. bell202(1) -bell 202
2. ccittv23(2) -ccitt v23
3. ntt(3) -nttrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.22 |
hwPstnCTPCidTasPatternIt indicates the mode of tas.
Options:
1. noTas(1) -no tas
2. dtAs(2) -DT asrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.23 |
hwPstnCTPUserGroupidIt indicates the user group ID.
-1 indicates clear the user group info.rw Integer32(-1..65535) .1.3.6.1.4.1.2011.6.112.1.1.1.24 |
hwPstnCTPDigitMapGroupNameIt indicates the digitmap group name.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.1.1.25 |
hwPstnCTPForceSendFskIndicates enable force send FSK or not.
Options:
1. enable(1) -enable force send FSK
2. disable(2) -disable force send FSKrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.26 |
hwPstnCTPFSKAlertIntervalIt indicates fskend to alert Interval.
-1 indicate invalid value.
Unit: 10msrw Integer32(0..100|-1) .1.3.6.1.4.1.2011.6.112.1.1.1.27 |
hwPstnCTPConfigDefaultCliIt indicates the default cli number of outgoing call.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.1.1.28 |
hwPstnCTPEOCTimeIndicates the end of call interval.
Unit: 10msrw Integer32 .1.3.6.1.4.1.2011.6.112.1.1.1.29 |
hwPstnCTPRemoteBlockPowerDenyIndicates the flag of remote block power deny.
Options:
1. enable(1) - enable remote block power deny
2. disable(2) - disable remote block power denyrw Enumeration .1.3.6.1.4.1.2011.6.112.1.1.1.30 |
hwPstnCTPOperTableIt is used to maintain PSTN ports with the VSP feature.
The index of this table is hwPstnCTPOperIndex.
Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service.
Through the table, services on the PSTN port can be terminated, started, and the service status can be queried. SEQUENCE OF HwPstnCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.2 |
hwPstnCTPOperEntryIt is used to maintain PSTN ports with the VSP feature.
The index of this entry is hwPstnCTPOperIndex.
Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service.
Through the table, services on the PSTN port can be terminated, started, and the service status can be queried. HwPstnCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.2.1 |
hwPstnCTPOperIndexIndicates the frame/slot/port.
24 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for PSTN port, must be 0x18
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.2.1.1 |
hwPstnCTPSrvStateIndicates the running status of the service layer of the PSTN port.
Options:
1. fault(1)-the port is fault
2. idle(2) -the user is idle
3. offHook(3) -the user off-hook
4. lock(4) -the user is locked
5. ring(5) -the user is ringingro Enumeration .1.3.6.1.4.1.2011.6.112.1.2.1.2 |
hwPstnCTPAdminStateIndicates the administration status of the service layer of the PSTN port.
Options:
1. blockedLocally(1) -the service is blocked cause of the local reason
2. blockedRemotely(2) -the service is blocked cause of the remote reason
3. inService(3) -the service is normal
4. shuttingDown(4) -the service is shutting down
5. delayTest(5) -the user is waiting for testingro Enumeration .1.3.6.1.4.1.2011.6.112.1.2.1.3 |
hwPstnCTPAdminOperIndicates the maintenance operation of the service layer of the PSTN port.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefullyrw Enumeration .1.3.6.1.4.1.2011.6.112.1.2.1.4 |
hwPstnCTPSrvStateChangeIndicates the service running status changing time of the PSTN port.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.112.1.2.1.5 |
hwPstnCTPAdminStateChangeIndicates the service administration status changing time of the PSTN port.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.112.1.2.1.6 |
hwPstnCTPMaxCobTimeLength of waiting timer for pstn user defer end service.
0 is not allowed to set.
Default: 240
Unit: minuterw Integer32 .1.3.6.1.4.1.2011.6.112.1.2.1.7 |
hwPstnCTPOnexpireIndicates disposal mode when pstn user defer end service timeout.
Options:
1. force(1) -force user to end service when end-service timeout
2. cancel(2) -cancel end service when end-service timeout
Default: force(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.2.1.8 |
hwPstnCTPRegStateIndicates the register status of the PSTN port.
Options:
1.initializing(1) - the user has not send register request
2.registering(2) - the user has send register request and is waiting for response
3.failRegistered(3) - the user received failed response or register timeout
4.unregistering(4) - the user is unregistering
5.active(5) - the user is actived
6.deactive(6) - the user is deactived
7. invalidusertype(7)ro Enumeration .1.3.6.1.4.1.2011.6.112.1.2.1.9 |
hwPstnCTPCallStateIndicates the register status of the PSTN port.
Options:
1. idle(1)- there is no call on the user
2. offhook(2)- the user hung up
3. dialing(3)- the user is dialing
4.establishing(4)- the call is establishing
5.ringing(5)- the phone is ringing
6.ringback(6)- the phone is ringback
7.connecting(7)- the call is connecting
8.connected(8)- the call is connected
9.hold(9)- the call is hold
10.disconnecting(10)- the call is disconnecting
11.locked(11)- the port is locked
12. invalidusertype(12)ro Enumeration .1.3.6.1.4.1.2011.6.112.1.2.1.10 |
hwPstnCTPCallWaitStateIndicates the register status of the PSTN port.
Options:
1. disable(1)- the service is disable
2. idle(2)- the is no callwaiting services
3. secondaryRinging(3)- the second part is ringing
4. secondaryConnecting(4)- the second part is connecting
5. secondaryConnected(5)- the second part is connected
6. secondaryDisconnecting(6)- the second part is disconnecting
7. invalidusertype(7)ro Enumeration .1.3.6.1.4.1.2011.6.112.1.2.1.11 |
hwMgPortStatisticsInfoTableThis table is used to query the statistics of the MG service ports.
The index of this table is hwMgPortStatInfoIndex. SEQUENCE OF HwMgPortStatisticsInfoEntry .1.3.6.1.4.1.2011.6.112.1.3 |
hwMgPortStatisticsInfoEntryThis table is used to query the statistics of the MG service ports.
The index of this entry is hwMgPortStatInfoIndex. HwMgPortStatisticsInfoEntry .1.3.6.1.4.1.2011.6.112.1.3.1 |
hwMgPortStatInfoIndexIndicates the frame ID.
The GetNext (walk) operation is to collect the statistics of each specified shelf of the system.
In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of the entire system; if hwMgPortStatIndex is not all F, the operation is to collect the statistics of the specified shelf. Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.1 |
hwPstnCTPStatTotalNumIndicates the total number of the MGPSTN service ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.2 |
hwPstnCTPStatFaultNumIndicates the number of the MGPSTN faulty ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.3 |
hwPstnCTPStatIdleNumIndicates the number of the MGPSTN idle ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.4 |
hwPstnCTPStatOffhookNumIndicates the number of the MGPSTN off-hooked ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.5 |
hwPstnCTPStatParkingNumIndicates the number of the MGPSTN locked ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.6 |
hwPstnCTPStatRingNumIndicates the number of the MGPSTN ringing ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.7 |
hwMgPortStatInfoTotalNumIndicates the total number of the MG service ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.8 |
hwMgPortStatInfoUseableNumIndicates the number of the MG idle ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.9 |
hwMgPortStatInfoBusyNumIndicates the number of the MG busy ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.10 |
hwMgPortStatInfoFaultNumIndicates the number of the MG faulty ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.11 |
hwMgPortStatInfoForbiddenNumIndicates the number of the MG blocked ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.3.1.12 |
hwBraCTPConfigTableIt is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature.
The index of this table is hwBraCTPConfigIndex.
The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user. SEQUENCE OF HwBraCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.4 |
hwBraCTPConfigEntryIt is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature.
The index of this entry is hwBraCTPConfigIndex.
The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user. HwBraCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.4.1 |
hwBraCTPConfigIndexIndicates the frame/slot/port.
25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for BRA port, must be 0x19
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.4.1.1 |
hwBraCTPMgIdIndicates the MG ID.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.4.1.2 |
hwBraCTPTerminationIDIndicates the start terminal ID (only the character string of digit type is supported).rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.4.1.3 |
hwBraCTPTelNoIndicates the BRA telephone number.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.4.1.4 |
hwBraCTPLinkSetNoIndicates the link set to which the BRA terminal belongs (the value range depends on the product specifications).rw Integer32 .1.3.6.1.4.1.2011.6.112.1.4.1.5 |
hwBraCTPIuaIIDIndicates the interface ID of the BRA terminal.
-1 means this parameter is not used.rw Integer32(-1|0..65535) .1.3.6.1.4.1.2011.6.112.1.4.1.6 |
hwBraCTPRowStatusIndicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.112.1.4.1.7 |
hwBraCTPPriorityFlagIndicates the priority of the terminal.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priority
Default: cat3(3)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.8 |
hwBraCTPLayerFlagIndicates whether to layer.
Options:
1. noLayer(1) -not to layer
2. layer(2) -to layer
3. null(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.9 |
hwBraCTPUniErrReportUNI fault report flag of bra user.
Options:
1. disable(1) -disable
2. enable(2) -enable
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.10 |
hwBraCTPAutoResumeLimitIndicates auto resume times threshold of bra user.
Default: 20rw Integer32 .1.3.6.1.4.1.2011.6.112.1.4.1.11 |
hwBraCTPIuaTextIIDUse the text to indicate the interface ID of the BRA terminal. Config area 0~65535. Display area 0~53.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.4.1.12 |
hwBraCTPPowerDialerSupportPowerdialer support flag of bra user.
Options:
1. enable(1) -enable
2. disable(2) -disable
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.13 |
hwBraCTPUserGroupidIt indicates the user group ID.
-1 indicates clear the user group info.rw Integer32(-1..65535) .1.3.6.1.4.1.2011.6.112.1.4.1.14 |
hwBraCTPDigitMapGroupNameIt indicates the digitmap group name.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.4.1.15 |
hwBraCTPConfigIncomingcallChangeNameIt indicates the number change of incomging call name.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.4.1.16 |
hwBraCTPConfigOutgoingcallChangeNameIt indicates the number change of outgoing call name.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.4.1.17 |
hwBraCTPConfigDefaultCliIt indicates the default cli number of outgoing call.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.4.1.18 |
hwBraCTPConfigDefaultCliModeIndicates the mode of cli number.
Options:
1. match(1) - match
2. overwrite(2) -overwrite
3. null(-1) -invalid value
Default: match(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.19 |
hwBraCTPConfigBearCapabilityIndicates the bearCapability of bra user.
Options:
1. speech(1) -speech
2. audio(2) -3.1k-audio
3. speechOraudio(3) -speech or 3.1k-audio
3. null(-1) -invalid value
Default: speechOraudio(3)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.20 |
hwBraCTPConfigCalledPartyNumTypeIndicates the type of called party number.
Options:
1. unknown(1) -unknown
2. national(2) -national
3. auto(3) -auto
4. international(4) -international
5. subscriber(5) -subscriber
6. null(-1) -invalid value
Default: unknown(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.21 |
hwBraCTPConfigCalledPartyNumInternationalPrefixFlagIndicates whether to add prefix on international number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(-1) -invalid value
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.22 |
hwBraCTPConfigCalledPartyNumNationalPrefixFlagIndicates whether to add prefix on national number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(-1) -invalid value
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.4.1.23 |
hwBraCTPOperTableIt is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature.
The index of this table is hwBraCTPOperIndex.
Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default.
Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service.
Through the table, services on the BRA port can be terminated, started, and the service status can be queried. SEQUENCE OF HwBraCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.5 |
hwBraCTPOperEntryIt is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature.
The index of this entry is hwBraCTPOperIndex.
Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default.
Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service.
Through the table, services on the BRA port can be terminated, started, and the service status can be queried. HwBraCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.5.1 |
hwBraCTPOperIndexIndicates the frame/slot/port.
25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for BRA port, must be 0x19
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.5.1.1 |
hwBraCTPB1SrvStateIndicates the running status of the service layer of the BRA B1 channel.
Options:
1. idle(1) -the user is idle
2. busy(2) -the user is busy
3. fault(3) -the port is faultro Enumeration .1.3.6.1.4.1.2011.6.112.1.5.1.2 |
hwBraCTPB2SrvStateIndicates the running status of the service layer of the BRA B2 channel.
Options:
1. idle(1) -the user is idle
2. busy(2) -the user is busy
3. fault(3) -the port is faultro Enumeration .1.3.6.1.4.1.2011.6.112.1.5.1.3 |
hwBraCTPB1AdminStateIndicates the administration status of the service layer of the BRA B1 channel.
Options:
1. blockedLocally(1) -the service is blocked cause of local reason
2. blockedRemotely(2) -the service is blocked cause of remote reason
3. inService(3) -the service is normal
4. shuttingDown(4) -the service is shutting downro Enumeration .1.3.6.1.4.1.2011.6.112.1.5.1.4 |
hwBraCTPB2AdminStateIndicates the administration status of the service layer of the BRA B2 channel.
Options:
1. blockedLocally(1) -the service is blocked cause of local reason
2. blockedRemotely(2) -the service is blocked cause of remote reason
3. inService(3) -the service is normal
4. shuttingDown(4) -the service is shutting downro Enumeration .1.3.6.1.4.1.2011.6.112.1.5.1.5 |
hwBraCTPAdminOperIndicates the maintenance operation of the service layer of the BRA port.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefullyrw Enumeration .1.3.6.1.4.1.2011.6.112.1.5.1.6 |
hwBraCTPDStateIndicates the status of the BRA D channel.
Options:
1. established(1) -established
2. block(2) -blocked
3. notConstruct(3) -unestablished
4. teiAlloced(4) -TEI is alloced
5. teiNotAlloced(5) -TEI is not allocedro Enumeration .1.3.6.1.4.1.2011.6.112.1.5.1.7 |
hwBraCTPB1SrvStateChangeIndicates the service running status changing time of the BRA B1 channel.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.112.1.5.1.8 |
hwBraCTPB2SrvStateChangeIndicates the service running status changing time of the BRA B2 channel.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.112.1.5.1.9 |
hwBraCTPB1AdminStateChangeIndicates the service administration status changing time of the BRA B1 channel.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.112.1.5.1.10 |
hwBraCTPB2AdminStateChangeIndicates the service administration status changing time of the BRA B2 channel.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.112.1.5.1.11 |
hwBraCTPDStateChangeIndicates the status changing time of the BRA D channel.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.112.1.5.1.12 |
hwBraCTPMaxCobTimeIndicates the length of waiting timer for bra user defer end service. 0 is not allowed to set.
Default:240
Unit: minuterw Integer32 .1.3.6.1.4.1.2011.6.112.1.5.1.13 |
hwBraCTPOnexpireIndicates the disposal mode when bra user defer end service timeout.
Options:
1. force(1) -force user to end service
2. cancel(2) -cancel user's end service
Default: force(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.5.1.14 |
hwBraCTPAutoResumeTimesIndicates the auto resume times of bra user.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.5.1.15 |
hwBraCTPStatisticsTableThis table is used to query the statistics of the MG-BRA service ports.
The index of this table is hwBraCTPStatIndex. SEQUENCE OF HwBraCTPStatisticsEntry .1.3.6.1.4.1.2011.6.112.1.6 |
hwBraCTPStatisticsEntryThis table is used to query the statistics of the MG-BRA service ports.
The index of this entry is hwBraCTPStatIndex. HwBraCTPStatisticsEntry .1.3.6.1.4.1.2011.6.112.1.6.1 |
hwBraCTPStatIndexIndicates the frame ID.
The GetNext (walk) operation is to collect the statistics of each specified shelf of the system.
In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of the entire system; if hwMgPortStatIndex is not all F, the operation is to collect the statistics of the specified shelf. Integer32 .1.3.6.1.4.1.2011.6.112.1.6.1.1 |
hwBraCTPStatTotalNumIndicates the total number of the MGBRA service ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.6.1.2 |
hwBraCTPStatFaultNumIndicates the number of faulty ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.6.1.3 |
hwBraCTPStatIdleNumIndicates the number of idle ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.6.1.4 |
hwBraCTPStatBusyNumIndicates the number of busy ports.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.6.1.5 |
hwPraCTPConfigTableIt is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature.
The index of this table is the hwPraCTPConfigIndex.
The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user. SEQUENCE OF HwPraCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.7 |
hwPraCTPConfigEntryIt is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature.
The index of this entry is the hwPraCTPConfigIndex.
The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user. HwPraCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.7.1 |
hwPraCTPConfigIndexIndicates the frame/slot/port.
22 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for E1 port, must be 0x16
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.7.1.1 |
hwPraCTPMgIdIndicates the MG ID.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.7.1.2 |
hwPraCTPTerminationIDIndicates the start terminal ID (only the character string of digit type is supported).rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.7.1.3 |
hwPraCTPLinkSetNoIndicates the link set to which the PRA terminal belongs (the value range depends on the product specifications).rw Integer32 .1.3.6.1.4.1.2011.6.112.1.7.1.4 |
hwPraCTPIuaIIDIndicates the interface ID of the PRA terminal.
-1 means this parameter is not used.rw Integer32(-1|0..65535) .1.3.6.1.4.1.2011.6.112.1.7.1.5 |
hwPraCTPRowStatusIndicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.112.1.7.1.6 |
hwPraCTPLayerFlagIndicates whether to layer.
Options:
1. noLayer(1) -not to layer
2. layer(2) -to layer
3. null(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.7 |
hwPraCTPPriorityFlagIndicates terminal priority.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priority
Default: cat3(3)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.8 |
hwPraCTPUniErrReportIndicates UNI fault report flag of e1 port.
Options:
1. disable(1) -disable UNI fault report of e1 port
2. enable(2) -enable UNI fault report of e1 port
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.9 |
hwPraCTPSubChnMaskIndicates from left to right, each bit indicates enable one sub channel(0-31) or not, 0 means disable, 1 means enable, sub channel 0 and 16 must enable.
Default: 11111111111111111111111111111111rw Bits .1.3.6.1.4.1.2011.6.112.1.7.1.10 |
hwPraCTPTelNoIndicates telphone number.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.7.1.11 |
hwPraCTPAutoResumeLimitIndicates auto resume times threshold of pra user.
Default: 20rw Integer32 .1.3.6.1.4.1.2011.6.112.1.7.1.12 |
hwPraCTPIuaTextIIDUse the text to indicate the interface ID of the PRA terminal.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.7.1.13 |
hwPraCTPPowerDialerSupportPowerdialer support flag of pra user.
Options:
1. enable(1) -support power dialer
2. disable(2) -not support power dialer
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.14 |
hwPraCTPUserGroupidIt indicates the user group ID.
-1 indicates clear the user group info.rw Integer32(-1..65535) .1.3.6.1.4.1.2011.6.112.1.7.1.15 |
hwPraCTPDigitMapGroupNameIt indicates the digitmap group name.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.7.1.16 |
hwPraCTPConfigIncomingcallChangeNameIt indicates the number change name of incoming call.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.7.1.17 |
hwPraCTPConfigOutgoingcallChangeNameIt indicates the number change name of outgoing call.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.7.1.18 |
hwPraCTPConfigDefaultCliIt indicates the default cli number of outgoing call.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.7.1.19 |
hwPraCTPConfigDefaultCliModeIndicates the mode of cli number.
Options:
1. match(1) -match
2. overwrite(2) -overwrite
3. null(0) -invalid value
Default: match(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.20 |
hwPraCTPConfigBearCapabilityIndicates the bearCapability of pra user.
Options:
1. speech(1) -speech
2. audio(2) -3.1k-audio
3. speechOraudio(3) -speech or 3.1k-audio
4. null(0) -invalid value
Default: speechOraudio(3)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.21 |
hwPraCTPConfigCalledPartyNumTypeIndicates the type of called party number.
Options:
1. unknown(1) -unknown
2. national(2) -national
3. auto(3) -auto
4. international(4) -international
5. subscriber(5) -subscriber
6. null(0) -invalid value
Default: unknown(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.22 |
hwPraCTPConfigCalledPartyNumInternationalPrefixFlagIndicates whether to add prefix on international number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(0) -invalid value
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.23 |
hwPraCTPConfigCalledPartyNumNationalPrefixFlagIndicates whether to add prefix on national number.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. null(0) -invalid value
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.7.1.24 |
hwPraCTPOperTableIt is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature.
The index of this table is hwPraCTPOperIndex.
Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel.
Through the table, services on the PRA port can be terminated, started, and the service status can be queried. SEQUENCE OF HwPraCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.8 |
hwPraCTPOperEntryIt is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature.
The index of this entry is hwPraCTPOperIndex.
Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel.
Through the table, services on the PRA port can be terminated, started, and the service status can be queried. HwPraCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.8.1 |
hwPraCTPOperIndexIndicates the frame/slot/port.
22 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for E1 port, must be 0x16
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.8.1.1 |
hwPraCTPBchnSrvStateIndicates the running status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.ro OCTET STRING .1.3.6.1.4.1.2011.6.112.1.8.1.2 |
hwPraCTPBchnAdminStateIndicates the administration status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-blocked-locally; 2-blocked-remotely; 3-in-service;4-shutting-down.ro OCTET STRING .1.3.6.1.4.1.2011.6.112.1.8.1.3 |
hwPraCTPAdminOperIndicates the service operation.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefullyrw Enumeration .1.3.6.1.4.1.2011.6.112.1.8.1.4 |
hwPraCTPDStateIndicates the status of the PRA D channel.
Options:
1. established(1) -established
2. block(2) -blocked
3. notConstruct(3) -unestablishedro Enumeration .1.3.6.1.4.1.2011.6.112.1.8.1.5 |
hwPraCTPMaxCobTimeIndicates length of waiting timer for pra user defer end service.
0 is not allowed to set.
Default: 240
Unit: minuterw Integer32 .1.3.6.1.4.1.2011.6.112.1.8.1.6 |
hwPraCTPOnexpireIndicates disposal mode when pra user defer end service timeout.
Options:
1. force(1) -force end service
2. cancel(2) -cancel end service
Default: force(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.8.1.7 |
hwPraCTPAutoResumeTimesIndicates auto resume times of pra user.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.8.1.8 |
hwPortStateTraceOperTableIt is used to trace port status.
The index of this table is hwPortStateTraceFrameId.
This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations. SEQUENCE OF HwPortStateTraceOperEntry .1.3.6.1.4.1.2011.6.112.1.9 |
hwPortStateTraceOperEntryIt is used to trace port status.
The index of this entry is hwPortStateTraceFrameId.
This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations. HwPortStateTraceOperEntry .1.3.6.1.4.1.2011.6.112.1.9.1 |
hwPortStateTraceOperFrameIdIndicates the frame ID. Integer32 .1.3.6.1.4.1.2011.6.112.1.9.1.1 |
hwPortStateTraceOperTypeIndicates the operation type.
Options:
1. stop(1) -stop tracing
2. start(2) -start tracing
3. handshake(3) -handshakerw Enumeration .1.3.6.1.4.1.2011.6.112.1.9.1.2 |
hwPortStateTraceOperReportTypeIndicates the report type (adopting the bit table):
Bit0: indicates to report the running status change of the physical layer.
Bit1: indicates to report the administration status change of the physical layer.
Bit2: indicates to report the running status change of the service layer.
Bit3: indicates to report the administration status change of the service layer.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.9.1.3 |
hwUserDataTrapSequence OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.1.10 |
hwPstnUserDataTrapSequenceIndicates that the Trap sequence is reported after the PSTN subscriber data changes.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.10.1 |
hwBraUserDataChangeSequenceIndicates that the Trap sequence is reported after the BRA subscriber data changes.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.10.2 |
hwPraUserDataChangeSequenceIndicates that the Trap sequence is reported after the PRA subscriber data changes.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.10.3 |
hwR2UserDataChangeSequenceIndicates that the Trap sequence is reported after the R2 subscriber data changes.ro Integer32 .1.3.6.1.4.1.2011.6.112.1.10.4 |
hwPmbsCTPConfigTableThis table is used to config PMBS user.
The index of this table is hwPmbsCTPConfigIndex. SEQUENCE OF HwPmbsCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.11 |
hwPmbsCTPConfigEntryThis table is used to config PMBS user.
The index of this entry is hwPmbsCTPConfigIndex. HwPmbsCTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.11.1 |
hwPmbsCTPConfigIndexIndicates the frame/slot/port.
The PMBS user must be configurated on BRA port.
25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for BRA port, must be 0x19
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.11.1.1 |
hwPmbsCTPLinkSetNoIUA LinkSetNo.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.11.1.2 |
hwPmbsCTPluaIIDIUA Interface ID.rw Integer32(0..65535 | -1) .1.3.6.1.4.1.2011.6.112.1.11.1.3 |
hwPmbsCTPRowStatusRow status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.112.1.11.1.4 |
hwPmbsCTPIuaTextIIDUse the text to indicate the interface ID of the PMBS terminal.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.11.1.5 |
hwPmbsCTPOperTableThis table is used to operate the PMBS user.
The index of this table is hwPmbsCTPOperIndex. SEQUENCE OF HwPmbsCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.12 |
hwPmbsCTPOperEntryThis table is used to operate the PMBS user.
The index of this entry is hwPmbsCTPOperIndex. HwPmbsCTPOperEntry .1.3.6.1.4.1.2011.6.112.1.12.1 |
hwPmbsCTPOperIndexIndicates the frame/slot/port.
25 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for BRA port, must be 0x19
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.12.1.1 |
hwPmbsCTPPLinkStateIndicates from left to right, each bit indicates plink status of one TEI(0-62) or not, 0 means plink not established, 1 means plink established.ro Bits .1.3.6.1.4.1.2011.6.112.1.12.1.2 |
hwPstnCTPRightConfigTableThis table is used to config PSTN user's right and servicedata.
The indexes of this table are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex. SEQUENCE OF HwPstnCTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.13 |
hwPstnCTPRightConfigEntryThis table is used to config PSTN user's right and servicedata.
The indexes of this entry are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex. HwPstnCTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.13.1 |
hwPstnCTPRightConfigIndexIndicates the frame/slot/port.
31 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for PSTN port, must be 0x18
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.13.1.1 |
hwPstnCTPRightPortBindIndexIndicates the telephone number index. Integer32 .1.3.6.1.4.1.2011.6.112.1.13.1.2 |
hwPstnCTPRightCallHoldIndicates the right flag of callhold.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.3 |
hwPstnCTPRightThreePartyIndicates the right flag of three-party.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.4 |
hwPstnCTPRightConfIndicates the right flag of conf.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.5 |
hwPstnCTPRightCtIndicates the right flag of ct.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.6 |
hwPstnCTPRightCwIndicates the right flag of cw.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.7 |
hwPstnCTPRightMcidIndicates the right flag of mcid.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.8 |
hwPstnCTPRightMwiIndicates the right flag of mwi.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.9 |
hwPstnCTPRightTpIndicates the right flag of tp.
Options:
1. disable(1) -disable
2. enable(2) -enablerwobsolete Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.10 |
hwPstnCTPRightCdIndicates the right flag of cd.
Options:
1. disable(1) -disable
2. enable(2) -enablerwobsolete Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.11 |
hwPstnCTPRightUus1Indicates the right flag of uus1.
Options:
1. disable(1) -disable
2. enable(2) -enablerwobsolete Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.12 |
hwPstnCTPRightUus2Indicates the right flag of uus2.
Options:
1. disable(1) -disable
2. enable(2) -enablerwobsolete Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.13 |
hwPstnCTPRightUus3Indicates the right flag of uus3.
Options:
1. disable(1) -disable
2. enable(2) -enablerwobsolete Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.14 |
hwPstnCTPRightCentrexNoIt is used to set centrex NO. of SipPstnUser, 4294967295 means to clear the configuration.rw Unsigned32 .1.3.6.1.4.1.2011.6.112.1.13.1.15 |
hwPstnCTPRightCentrexPrefixIndicates the CentrexPrefix of SipPstnUser.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.16 |
hwPstnCTPRightCentrexFlagIndicates the CentrexFlag of SipPstnUser.
Options:
1. dialDirectly(1) -dial directly
2. dialSecondary(2) -dial secondaryrw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.17 |
hwPstnCTPRightMwiModeIndicates the MwiMode of SipPstnUser.
Options:
1. deferred(1) -deferred
2. immediate(2) -immediate
3. combine(3) -combinerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.18 |
hwPstnCTPRightHotTimeIndicates the HotTime of SipPstnUser.
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.112.1.13.1.19 |
hwPstnCTPRightHotLineNumIndicates the HotLineNum of SipPstnUser, the length of hotlinenum mustn't exceed 64.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.20 |
hwPstnCTPRightDialToneIndicates the DialTone of SipPstnUser.
Options:
1. normal(1) -normal tone
2. special(2) -special tone
3. mw(3) -message waiting tone
4. stutter(4) -stutter tonerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.21 |
hwPstnCTPRightCfbNumIndicates the CfbNum of SipPstnUser.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.22 |
hwPstnCTPRightCfnrNumIndicates the CfnrNum of SipPstnUser.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.23 |
hwPstnCTPRightCfuNumIndicates the CfuNum of SipPstnUser.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.24 |
hwPstnCTPRightCfnrTimeIndicates the CfnrTime of SipPstnUser.
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.112.1.13.1.25 |
hwPstnCTPRightAnonymousCallIndicates the right flag of anonymous-call.
Options:
1. disable(1) -disable anonymous-call
2. enable(2) -enable anonymous-callrw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.26 |
hwPstnCTPRightAuthNameIndicates the authorization username of sippstnuser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.27 |
hwPstnCTPRightAuthPasswordIndicates the authorization password of sippstnuser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.28 |
hwPstnCTPRightEndConfigIndexIndicates the end shelf/slot/port.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.13.1.29 |
hwPstnCTPRightAuthPasswordModeIndicates the authorization mode of the password for sippstnuser.
Options:
1. password(1) -authorized by password
2. ha1(2)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.30 |
hwPstnCTPRightAuthHA1Indicates the authorization HA1 value of sippstnuser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.31 |
hwPstnCTPRightAutoReversePolarityIndicates the right flag of auto reverse polarity.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.32 |
hwPstnCTPRightDisplayNameModeIndicates the right flag of display name mode.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.33 |
hwPstnCTPRightDisplayNameIndicates the display name string.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.13.1.34 |
hwPstnCTPRightHotLineIndicates the right flag of hotline.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.35 |
hwPstnCTPRightPermanentHoldIndicates the right flag of permanent-hold.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.36 |
hwPstnCTPRightCutoffDisconnectIndicates the right flag of cutoff-disconnect.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.37 |
hwPstnCTPRightSccClassIndicates the right flag of SCC class service, for example call-park, call-pickup, EBO.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.38 |
hwPstnCTPRightPermanentHoldModeIndicates the PermanentHoldMode of SipPstnUser.
Options:
1. norecall(1) - no recall
2. reminder(2) -reminder
3. recall(3) -recallrw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.39 |
hwPstnCTPRightPermanentHoldTimeIndicates the PermanentHoldTime of SipPstnUser.
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.112.1.13.1.40 |
hwPstnCTPRightFastDisconnectIndicates the right flag of fast-disconnect.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.41 |
hwPstnCTPRightDcIndicates the right flag of dual communication.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.13.1.42 |
hwCTPExternNumberConfigTableThis table is used to config extern number of the PSTN or ISDN user.
The indexes of this table are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex. SEQUENCE OF HwCTPExternNumberConfigEntry .1.3.6.1.4.1.2011.6.112.1.14 |
hwCTPExternNumberConfigEntryThis table is used to config extern number of the PSTN or ISDN user.
The indexes of this entry are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex. HwCTPExternNumberConfigEntry .1.3.6.1.4.1.2011.6.112.1.14.1 |
hwCTPExternNumberConfigIndexIndicates the frame/slot/port.
31 0
xxxxxxx | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.14.1.1 |
hwCTPExternNumberPortBindIndexIndicates the extend number index.
If the value equal -1, then return the idle index of this shelf/slot/port. Integer32 .1.3.6.1.4.1.2011.6.112.1.14.1.2 |
hwCTPExternNumberIndicates the extend number. - means to delete this extern number.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.14.1.3 |
hwCTPExternRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.112.1.14.1.4 |
hwCTPExternUserGroupidIt indicates the user group ID.
-1 indicates clear the user group info.rw Integer32(-1..65535) .1.3.6.1.4.1.2011.6.112.1.14.1.5 |
hwBraCTPRightConfigTableThis table is used to config BRA user's right and servicedata.
The indexes of this table are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex. SEQUENCE OF HwBraCTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.15 |
hwBraCTPRightConfigEntryThis table is used to config BRA user's right and servicedata.
The indexes of this entry are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex. HwBraCTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.15.1 |
hwBraCTPRightConfigIndexIndicates the frame/slot/port.
31 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for BRA port, must be 0x19
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.15.1.1 |
hwBraCTPRightPortBindIndexIndicates the telephone number index. Integer32 .1.3.6.1.4.1.2011.6.112.1.15.1.2 |
hwBraCTPRightAuthNameIndicates the authorization username of sipbrauser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.15.1.3 |
hwBraCTPRightAuthPasswordIndicates the authorization password of sipbrauser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.15.1.4 |
hwBraCTPRightEndConfigIndexIndicates the end shelf/slot/port.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.15.1.5 |
hwBraCTPRightAuthPasswordModeIndicates the authorization mode of the password for sipbrauser.
Options:
1. password(1) -authorized by password
2. ha1(2) -authorized by ha1rw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.6 |
hwBraCTPRightAuthHA1Indicates the authorization HA1 value of sipbrauser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.15.1.7 |
hwBraCTPRightCentrexNoIt is used to set centrex NO. of SipBraUser, 4294967295 means to clear the configuration.rw Unsigned32 .1.3.6.1.4.1.2011.6.112.1.15.1.8 |
hwBraCTPRightCentrexPrefixIndicates the CentrexPrefix of SipBraUser.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.15.1.9 |
hwBraCTPRightCentrexFlagIndicates the CentrexFlag of SipBraUser.
Options:
1. dialDirectly(1) -dial directly
2. dialSecondary(2) -dial secondaryrw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.10 |
hwBraCTPRightMwiModeIndicates the MwiMode of SipBraUser.
Options:
1. deferred(1) -deferred
2. immediate(2) -immediate
3. combine(3) -combinerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.11 |
hwBraCTPRightCallHoldIndicates the right flag of callhold.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.12 |
hwBraCTPRightThreePartyIndicates the right flag of three-party.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.13 |
hwBraCTPRightConfIndicates the right flag of conf.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.14 |
hwBraCTPRightCtIndicates the right flag of ct.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.15 |
hwBraCTPRightCwIndicates the right flag of cw.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.16 |
hwBraCTPRightMcidIndicates the right flag of mcid.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.17 |
hwBraCTPRightMwiIndicates the right flag of mwi.
Options:
1. disable(1) -disable
2. enable(2) -enablerw Enumeration .1.3.6.1.4.1.2011.6.112.1.15.1.18 |
hwPraCTPRightConfigTableThis table is used to config PRA user's servicedata.
The indexes of this table are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex. SEQUENCE OF HwPraCTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.16 |
hwPraCTPRightConfigEntryThis table is used to config PRA user's servicedata.
The indexes of this entry are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex. HwPraCTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.16.1 |
hwPraCTPRightConfigIndexIndicates the frame/slot/port.
31 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for E1 port, must be 0x16
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.16.1.1 |
hwPraCTPRightPortBindIndexIndicates the telephone number index. Integer32 .1.3.6.1.4.1.2011.6.112.1.16.1.2 |
hwPraCTPRightAuthNameIndicates the authorization username of sipprauser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.16.1.3 |
hwPraCTPRightAuthPasswordIndicates the authorization password of sipprauser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.16.1.4 |
hwPraCTPRightEndConfigIndexIndicates the end shelf/slot/port.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.16.1.5 |
hwPraCTPRightAuthPasswordModeIndicates the authorization mode of the password for sipprauser.
Options:
1. password(1) -authorized by password
2. ha1(2) -authorized by ha1rw Enumeration .1.3.6.1.4.1.2011.6.112.1.16.1.6 |
hwPraCTPRightAuthHA1Indicates the authorization HA1 value of sipprauser.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.16.1.7 |
hwPraCTPRightCentrexNoIt is used to set centrex NO. of SipPraUser, 4294967295 means to clear the configuration.rw Unsigned32 .1.3.6.1.4.1.2011.6.112.1.16.1.8 |
hwPraCTPRightCentrexPrefixIndicates the CentrexPrefix of SipPraUser.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.16.1.9 |
hwPraCTPRightCentrexFlagIndicates the CentrexFlag of SipPraUser.
Options:
1. dialDirectly(1) -dial directly
2. dialSecondary(2) -dial secondaryrw Enumeration .1.3.6.1.4.1.2011.6.112.1.16.1.10 |
hwPraCTPRightMwiModeIndicates the MwiMode of SipPraUser.
Options:
1. deferred(1) -deferred
2. immediate(2) -immediate
3. combine(3) -combinerw Enumeration .1.3.6.1.4.1.2011.6.112.1.16.1.11 |
hwR2CTPConfigTableIt is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature.
The index of this table is the hwR2CTPConfigIndex.
The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user. SEQUENCE OF HwR2CTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.17 |
hwR2CTPConfigEntryIt is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature.
The index of this entry is the hwR2CTPConfigIndex.
The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user. HwR2CTPConfigEntry .1.3.6.1.4.1.2011.6.112.1.17.1 |
hwR2CTPConfigIndexIndicates the frame/slot/port.
31 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for R2 port, must be 0x16
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.17.1.1 |
hwR2CTPMgIdIndicates the MG ID.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.17.1.2 |
hwR2CTPTerminationIDIndicates the start terminal ID (only the character string of digit type is supported).rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.17.1.3 |
hwR2CTPSignalProfileIndexIndicates the R2 signal profile index.rw Integer32 .1.3.6.1.4.1.2011.6.112.1.17.1.4 |
hwR2CTPSignalProfileNameIndicates the R2 signal profile name.ro OCTET STRING .1.3.6.1.4.1.2011.6.112.1.17.1.5 |
hwR2CTPRowStatusIndicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.112.1.17.1.6 |
hwR2CTPPriorityFlagIndicates terminal priority.
Options:
1. cat1(1) -the highest priority
2. cat2(2) -the middle priority
3. cat3(3) -the lowest priorityrw Enumeration .1.3.6.1.4.1.2011.6.112.1.17.1.7 |
hwR2CTPTelNoIndicates telphone number.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.17.1.8 |
hwR2CTPUserGroupidIt indicates the user group ID.
-1 indicates clear the user group info.rw Integer32(-1..65535) .1.3.6.1.4.1.2011.6.112.1.17.1.9 |
hwR2CTPDigitMapGroupNameIt indicates the digitmap group name.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.17.1.10 |
hwR2CTPRemoteRingFlagIndicates RemoteRing.
Options:
1. disable(1) -disable receive remote early media
2. enable(2) -enable receive remote early media
3. null(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.112.1.17.1.11 |
hwR2CTPConfigIncomingcallChangeNameIt indicates the number change name of incoming call.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.17.1.12 |
hwR2CTPConfigOutgoingcallChangeNameIt indicates the number change name of outgoing call.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.17.1.13 |
hwR2CTPOperTableIt is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature.
The index of this table is hwR2CTPOperIndex.
Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service.
Through the table, services on the R2 port can be terminated, started, and the service status can be queried. SEQUENCE OF HwR2CTPOperEntry .1.3.6.1.4.1.2011.6.112.1.18 |
hwR2CTPOperEntryIt is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature.
The index of this entry is hwR2CTPOperIndex.
Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service.
Through the table, services on the R2 port can be terminated, started, and the service status can be queried. HwR2CTPOperEntry .1.3.6.1.4.1.2011.6.112.1.18.1 |
hwR2CTPOperIndexIndicates the frame/slot/port.
31 0
0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for R2 port, must be 0x16
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.18.1.1 |
hwR2CTPBchnSrvStateIndicates the running status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.ro OCTET STRING .1.3.6.1.4.1.2011.6.112.1.18.1.2 |
hwR2CTPBchnAdminStateIndicates the administration status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows:
1-blocked-locally; 2-blocked-remotely; 3-in-service;4-shutting-down;5-MGCblock;6-PBXblock;7-bothblock.ro OCTET STRING .1.3.6.1.4.1.2011.6.112.1.18.1.3 |
hwR2CTPAdminOperIndicates the service operation.
Options:
1. endService(1) -stop service
2. startService(2) -start service
3. deferEndingService(3) -stop service gracefullyrw Enumeration .1.3.6.1.4.1.2011.6.112.1.18.1.4 |
hwR2CTPMaxCobTimeIndicates length of waiting timer for R2 user defer end service.
0 is not allowed to set.
Default: 240
Unit: minuterw Integer32 .1.3.6.1.4.1.2011.6.112.1.18.1.5 |
hwR2CTPOnexpireIndicates disposal mode when R2 user defer end service timeout.
Options:
1. force(1) -force end service
2. cancel(2) -cancel end service
Default: force(1)rw Enumeration .1.3.6.1.4.1.2011.6.112.1.18.1.6 |
hwR2CTPRightConfigTableThis table is used to config R2 user's right.
The indexes of this table are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex. SEQUENCE OF HwR2CTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.19 |
hwR2CTPRightConfigEntryThis table is used to config R2 user's right.
The indexes of this entry are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex. HwR2CTPRightConfigEntry .1.3.6.1.4.1.2011.6.112.1.19.1 |
hwR2CTPRightConfigIndexIndicates the frame/slot/port.
31 0
0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for PSTN port, must be 0x18
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
E1 port = 0x16
PSTN port = 0x18
BRA port = 0x19
AT0 port = 0x1b Integer32 .1.3.6.1.4.1.2011.6.112.1.19.1.1 |
hwR2CTPRightPortBindIndexIndicates the telephone number index. Integer32 .1.3.6.1.4.1.2011.6.112.1.19.1.2 |
hwR2CTPRightAuthNameIndicates the authorization username of sipR2user.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.19.1.3 |
hwR2CTPRightAuthPasswordIndicates the authorization password of sipR2user.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.19.1.4 |
hwR2CTPRightAuthPasswordModeIndicates the authorization mode of the password for sipR2user.
Options:
1. password(1) -authorized by password
2. ha1(2) -authorized by ha1rw Enumeration .1.3.6.1.4.1.2011.6.112.1.19.1.5 |
hwR2CTPRightAuthHA1Indicates the authorization HA1 value of sipR2user.
The character set is unrestricted.rw OCTET STRING .1.3.6.1.4.1.2011.6.112.1.19.1.6 |
hwIASVoiceUserTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.2 |
hwLightTrapPortNumThe number of the ports send light state trap.ro Integer32 .1.3.6.1.4.1.2011.6.112.2.1 |
hwLightTrapPortInfoThe position and state of the ports.ro OCTET STRING .1.3.6.1.4.1.2011.6.112.2.2 |
hwVoiceUserFrameIndicate the frame that user is configed at.
-1 indicate invalid value.ro Integer32(0..255|-1) .1.3.6.1.4.1.2011.6.112.2.3 |
hwVoiceUserSlotIndicate the slot that user is configed at.
-1 indicate invalid value.ro Integer32(0..255|-1) .1.3.6.1.4.1.2011.6.112.2.4 |
hwVoiceUserPortIndicate the port that user is configed at.
-1 indicate invalid value.ro Integer32(0..255|-1) .1.3.6.1.4.1.2011.6.112.2.5 |
hwVoiceUserOperateTypeIndicate the port that user operate type.
Options:
1. user-data-add(1) -add user data
2. user-data-delete(2) -delete user data
3. user-data-modify(3) -modify user dataro Enumeration .1.3.6.1.4.1.2011.6.112.2.6 |
hwVoiceUserPortNumThe number of the ports send by user config change trap.ro Integer32 .1.3.6.1.4.1.2011.6.112.2.7 |
hwVoiceUserTsnIndicate the time slot ID that user is configed at.
-1 indicate invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.112.2.8 |
hwIASVoiceUserTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.3 |
hwIASVoiceUserCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.3.1 |
hwIASVoiceUserPortTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.3.1.1 |
hwIASVoiceUserPortLightTrapThis notification indicates that reset result of the SIP media gateway. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.1.1.0.1 |
hwIASVoiceUserPortPstnDataChangeTrapThis notification indicates that data of pstn user have been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.1.1.0.2 |
hwIASVoiceUserPortBraDataChangeTrapThis notification indicates that data of bra user have been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.1.1.0.3 |
hwIASVoiceUserPortPraDataChangeTrapThis notification indicates that data of pra user have been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.1.1.0.4 |
hwIASVoiceUserPortPmbsDataChangeTrapThis notification indicates that data of pmbs user have been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.1.1.0.5 |
hwIASVoiceUserPortR2DataChangeTrapThis notification indicates that data of R2 user have been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.1.1.0.6 |
hwIASVoiceUserAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.3.2 |
hwIASVoiceUserPortAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.3.2.1 |
hwIASVoiceUserRemoteBlockTrapThis notification indicates that the user is remote blocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.2.1.0.1 |
hwIASVoiceUserUnblockTrapThis notification indicates that the user is unblocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.2.1.0.2 |
hwIASVoiceUserlockedTrapThis notification indicates that the user is locked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.2.1.0.3 |
hwIASVoiceUserUnlockedTrapThis notification indicates that the user is unlocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.2.1.0.4 |
hwIASVoiceUserTsnAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.112.3.2.2 |
hwIASVoiceUserTsnBlockTrapThis notification indicates that the user time slot is blocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.2.2.0.1 |
hwIASVoiceUserTsnUnBlockTrapThis notification indicates that the user time slot is unblocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.112.3.2.2.0.2 |