HUAWEI-TUNNEL-MIB
AI MIB Summary
The HUAWEI-TUNNEL-MIB module monitors and manages tunnel interfaces on Huawei network devices, specifically facilitating the configuration and status tracking of hybrid dynamic bandwidth punishment and resumption mechanisms. It provides visibility into tunnel session states and bandwidth throttling events to enforce traffic policies and maintain service quality.
V2.05 Update hwHybridDynBwPunish and hwHybridDynBwResume, modify their description.
Main OID:
hwTunnelMib.1.3.6.1.4.1.2011.5.25.201
61
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
hwTunnelMibV2.05 Update hwHybridDynBwPunish and hwHybridDynBwResume, modify their description. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.201 |
SNMPv2-CONFV2.05 Update hwHybridDynBwPunish and hwHybridDynBwResume, modify their description. Unknown .1.3.6.1.4.1.2011.5.25.201 |
hwTunnelMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.201.1 |
hwTunnelCfgTableMIB table for the tunnel configuration information. SEQUENCE OF HwTunnelCfgEntry .1.3.6.1.4.1.2011.5.25.201.1.1 |
hwTunnelCfgEntryDescribes tunnel interface configuration information. HwTunnelCfgEntry .1.3.6.1.4.1.2011.5.25.201.1.1.1 |
hwTunnelProtocolThis object specifies the Tunnel protocol type.rw Enumeration .1.3.6.1.4.1.2011.5.25.201.1.1.1.1 |
hwTunnelSourceTypeThis object specifies the Tunnel source type.rw Enumeration .1.3.6.1.4.1.2011.5.25.201.1.1.1.2 |
hwTunnelSrcIfNameThis object specifies the tunnel source interface name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.201.1.1.1.3 |
hwTunnelAddrTypeThis object specifies the address type for Tunnel source and
destination address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.201.1.1.1.4 |
hwTunnelSourceAddrThis object specifies source address of the tunnel interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.201.1.1.1.5 |
hwTunnelDestinationAddrThis object specifies destination address of the tunnel interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.201.1.1.1.6 |
hwTunnelCfgUndoFlagThis object specifies undo operation for specified hwTunnelCfgTable parameter.rw Enumeration .1.3.6.1.4.1.2011.5.25.201.1.1.1.7 |
hwIpv6Tunnel4Over6CfgTableMIB table for 4Over6 tunnel configuration information. SEQUENCE OF HwIpv6Tunnel4Over6CfgEntry .1.3.6.1.4.1.2011.5.25.201.1.2 |
hwIpv6Tunnel4Over6CfgEntryDescribes IPv6 tunnel 4Over6 parameters. HwIpv6Tunnel4Over6CfgEntry .1.3.6.1.4.1.2011.5.25.201.1.2.1 |
hwIpv6TunnelEncapLimitThis object specifies Tunnel ipv4-ipv6 encapsulation limit.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.2.1.1 |
hwIpv6TunnelEncapLimitDisableThis object specifies Tunnel encapsulation is disabled or not.
Default value is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.201.1.2.1.2 |
hwIpv6TunnelFlowLabelThis object specifies Tunnel ipv4-ipv6 flow label.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.2.1.3 |
hwIpv6TunnelHopLimitThis object specifies Tunnel ipv4-ipv6 hop limit.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.2.1.4 |
hwIpv6TunnelTrafficClassThis object specifies Tunnel ipv4-ipv6 traffic-class.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.2.1.5 |
hwIpv6TunnelTrafficOriginalSpecifies Tunnel ipv4-ipv6 traffic-class original is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.201.1.2.1.6 |
hwIPv6Tunnel4Over6CfgUndoFlagThis object specifies undo operation for specified hwIpv6Tunnel4Over6CfgTable parameter.rw Enumeration .1.3.6.1.4.1.2011.5.25.201.1.2.1.7 |
hwTunnelGlobalConfigObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.201.1.3 |
hwTunnelCreateFailCheckPeriodThis value of this object identifies the interval used to check tunnel failures.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.3.1 |
hwTunnelCreateFailThresholdThis value of this object identifies the threshold of tunnel failures.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.3.2 |
hwTunnelKeepaliveTimeoutPeriodThis value of this object identifies the interval used to check tunnel keepalive timeouts.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.3.3 |
hwTunnelKeepaliveTimeoutThresholdThis value of this object identifies the threshold of tunnel keepalive timeouts.rw Integer32 .1.3.6.1.4.1.2011.5.25.201.1.3.4 |
hwHybridAccessTunnelGlobalStatTableThis object indicates the MIB table for hybrid access tunnel statistics information. SEQUENCE OF HwHybridAccessTunnelGlobalStatEntry .1.3.6.1.4.1.2011.5.25.201.1.4 |
hwHybridAccessTunnelGlobalStatEntryThis object indicates the hybrid access tunnel statistics parameters. HwHybridAccessTunnelGlobalStatEntry .1.3.6.1.4.1.2011.5.25.201.1.4.1 |
hwTunnelTypeThis object indicates the tunnel type. Enumeration .1.3.6.1.4.1.2011.5.25.201.1.4.1.1 |
hwTunnelCreateSuccessCntThe value of this object identifies the total number of GRE tunnels set up on each device.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.2 |
hwTunnelRequestPktRcvCntThe value of this object identifies the total number of requests to create GRE tunnels on each device.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.3 |
hwTunnelAuthenSuccessCntThe value of this object identifies the number of authentication successes of GRE Tunnels.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.4 |
hwTunnelAuthorSuccessCntThe value of this object identifies the number of authorization successes of GRE Tunnels.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.5 |
hwTunnelAuthenAttemptCntThe value of this object identifies the number of authentication attempts of GRE Tunnels.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.6 |
hwTunnelAuthorAttemptCntThe value of this object identifies the number of of authorization attempts of GRE Tunnels.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.7 |
hwTunnelTimeOutCntThe value of this object identifies the number of of tunnels that have timed out.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.8 |
hwTunnelAuthUnknownCntThe value of this object identifies the number of authentication/authorization requests rejected because of Unknown Customerro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.9 |
hwTunnelAuthNotAllowedCntThe value of this object identifies the number of authentication/authorization requests rejected because of Service not allowedro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.10 |
hwTunnelAuthFailOthersCntThe value of this object identifies the number of authentication/authorization requests rejected because of Others reason.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.11 |
hwTunnelCreateFailCntThe value of this object identifies the total number of GRE tunnel creation failures on each device.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.12 |
hwTunnelInDataFlowThis object indicates the uplink data volume using the tunnel connection.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.13 |
hwTunnelOutDataFlowThis object indicates the downlink data volume using the tunnel connection.ro Counter64 .1.3.6.1.4.1.2011.5.25.201.1.4.1.14 |
hwTunnelTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.201.1.5 |
hwHybridRttThresholdThe value of this object identifies the hybrid-access tunnel rtt check threshold.ro Integer32 .1.3.6.1.4.1.2011.5.25.201.1.5.1 |
hwHybridRttCheckTimesThe value of this object identifies the hybrid-access tunnel rtt check times.ro Integer32 .1.3.6.1.4.1.2011.5.25.201.1.5.2 |
hwHybridCreateFailValueThe value of this object identifies the hybrid-access tunnel create fail error value.ro Integer32 .1.3.6.1.4.1.2011.5.25.201.1.5.3 |
hwHybridTunnelTypeThe value of this object identifies the hybrid-access tunnel type.ro Integer32 .1.3.6.1.4.1.2011.5.25.201.1.5.4 |
hwHybridDynDLBwAdjustValueThe value of this object identifies the hybrid-access tunnel down-link bandwith adjust value.ro Integer32 .1.3.6.1.4.1.2011.5.25.201.1.5.5 |
hwHybridDynULBwAdjustValueThe value of this object identifies the hybrid-access tunnel up-link bandwith adjust value.ro Integer32 .1.3.6.1.4.1.2011.5.25.201.1.5.6 |
hwTunnelMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.201.2 |
hwTunnelCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.201.2.1 |
hwTunnelGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.201.2.2 |
hwTunnelNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.201.3 |
hwTunnelCreateFailOverThresholdThis object indicates that an alarm is generated if the number of tunnel failures exceeds the threshold during a period. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.1 |
hwOverflowTunnelTimeoutOverThresholdThis object indicates that an alarm is generated if the number of overflow tunnel timeouts of hello packets exceeds the threshold during a period. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.2 |
hwPriorTunnelTimeoutOverThresholdThis object indicates that an alarm is generated if the number of priority tunnel timeouts of hello packets exceeds the threshold during a period. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.3 |
hwHybridTunnelCreateFailThis object indicates that the overflow or priority tunnel fails to be created. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.4 |
hwHybridSwitch2PriorTunnelThis object indicates that the delay of the overflow tunnel exceeds the threshold and traffic is switched to the priority tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.5 |
hwHybridSwitch2OverflowTunnelThis object indicates that that the delay of the overflow tunnel falls below the threshold and can be used to forward traffic again. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.6 |
hwHybridDynBwPunishThis object indicates that the bandwidth of the priority tunnel needs to be reduced. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.7 |
hwHybridDynBwResumeThis object indicates that the bandwidth of the priority tunnel needs to be increased. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.201.3.8 |