HUAWEI-TAD-MIB
AI MIB Summary
The HUAWEI-TAD-MIB module manages the configuration of interface and system-level route dampening policies on Huawei network devices to suppress unstable routing updates. It specifically controls dampening parameters such as half-life, reuse, suppress, and max-suppress-time thresholds to stabilize routing table convergence.
The Custom damping MIB module is defined to manage the configuration under system or interface view.
Main OID:
hwTAD.1.3.6.1.4.1.2011.5.25.128
36
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
36 total| Object Name |
|---|
hwTADThe Custom damping MIB module is defined to manage the configuration under system or interface view. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.128 |
hwTADObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.128.1 |
hwTADInterfaceTableTransmission alarm damping interface configuration table. SEQUENCE OF HwTADInterfaceEntry .1.3.6.1.4.1.2011.5.25.128.1.1 |
hwTADInterfaceEntryThe entry of a SDH or SONET interface with damping function enabled. HwTADInterfaceEntry .1.3.6.1.4.1.2011.5.25.128.1.1.1 |
hwTADInterfaceIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.128.1.1.1.1 |
hwTADFilterEnableWhether filter function is enabled.rw HWEnableValue .1.3.6.1.4.1.2011.5.25.128.1.1.1.2 |
hwTADFilterExpireTimeHow long the alarm will be postponed to process. Unit: millisecond.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.3 |
hwTADDampingEnableWhether damping function is enabled.rw HWEnableValue .1.3.6.1.4.1.2011.5.25.128.1.1.1.4 |
hwTADSuppressThe suppressing value. When figure-of-merit of alarm exceeds this value,
this alarm will be damped.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.5 |
hwTADCeilingThe ceiling value. Figure-of-merit can't exceed this value. The ceiling
value must be larger than suppressing value.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.6 |
hwTADReuseThe reusing value. When figure-of-merit becomes lower than this value.
The alarm will be reused (exit from suppressing status). The reusing value must be
less than suppressing value.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.7 |
hwTADDecayOkThe half decay time when alarm status is down. Unit: millisecond.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.8 |
hwTADDecayNgThe half decay time when alarm status is up. Unit: millisecond.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.9 |
hwTADResetStatisticsWhether to reset alarm statistics. 1 means resetting statistics once.rw Enumeration .1.3.6.1.4.1.2011.5.25.128.1.1.1.10 |
hwTADResetTimeLast reset time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.128.1.1.1.11 |
hwTADB3tcaThresholdB3tca threshold in form of 10e-n.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.12 |
hwTADSdbereThresholdSdbere threshold in form of 10e-n.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.13 |
hwTADSfbereThresholdSfbere threshold in form of 10e-n.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.14 |
hwTADB1tcaThresholdB1tca threshold in form of 10e-n.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.15 |
hwTADB2tcaThresholdB2tca threshold in form of 10e-n.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.16 |
hwTADBip2tcaThresholdBip2tca threshold in form of 10e-n.rw Integer32 .1.3.6.1.4.1.2011.5.25.128.1.1.1.17 |
hwTADAlarmTableTransmission alarm damping alarm configuration table. SEQUENCE OF HwTADAlarmEntry .1.3.6.1.4.1.2011.5.25.128.1.2 |
hwTADAlarmEntryThe entry of an alarm. HwTADAlarmEntry .1.3.6.1.4.1.2011.5.25.128.1.2.1 |
hwTADAlarmIfIndexIndex number of the interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.128.1.2.1.1 |
hwTADAlarmTypeIndex number of the alarm. The range is from 1 to 39, corresponding to:
auais, b3tca, lais, lof, lom, lop, los, lrdi, lrei, oof, pais, prdi, prei, pplm, rdool,
rrool, sdbere, sfbere, trool, puneq, lcd, wlnk, oduais, odulck, oduoci, otuais, otulom,
otusdber, otusfber, pmbdi, pmtim, rlof, rlos, roof, smbdi, smiae, smtim, b1tca, b2tca, prefectca. Enumeration .1.3.6.1.4.1.2011.5.25.128.1.2.1.2 |
hwTADAlarmIfDownWhether this alarm leads to interface down. In default lais, lof and los
are enabled to lead interface down.rw HWEnableValue .1.3.6.1.4.1.2011.5.25.128.1.2.1.3 |
hwTADAlarmLogWhether this alarm will be logged. In default all alarm types won't be logged.rw HWEnableValue .1.3.6.1.4.1.2011.5.25.128.1.2.1.4 |
hwTADAlarmStatusThe status of the alarm. 1 means alarm is up, 2 means alarm is down.ro Enumeration .1.3.6.1.4.1.2011.5.25.128.1.2.1.5 |
hwTADAlarmInFilterWhether this alarm is in filtering status. 1 means alarm is in filtering status,
2 means alarm isn't in filtering status.ro Enumeration .1.3.6.1.4.1.2011.5.25.128.1.2.1.6 |
hwTADAlarmFigureThis figure is used to evaluate the stability of the alarm. Large
value means un-stability.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.128.1.2.1.7 |
hwTADAlarmInSuppressWhether this alarm is in suppressing status. 1 means alarm is
in suppressing status, 2 means alarm isn't in suppressing status.ro Enumeration .1.3.6.1.4.1.2011.5.25.128.1.2.1.8 |
hwTADAlarmFlappingCountHow many times alarm's status changed.ro Counter32 .1.3.6.1.4.1.2011.5.25.128.1.2.1.9 |
hwTADAlarmSuppressCountHow many times alarm is suppressed.ro Counter32 .1.3.6.1.4.1.2011.5.25.128.1.2.1.10 |
hwTADConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.128.2 |
hwTADGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.128.2.1 |
hwTADCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.128.2.2 |