HUAWEI-STACK-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HUAWEI-STACK-MIB.
Main OID:
huaweiStackMIB.1.3.6.1.4.1.2011.5.25.183
235
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
235 total| Object Name |
|---|
huaweiStackMIB MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.183 |
hwStackObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.1 |
hwStackRunThe state of stack function on the device. The value enabled(1)
indicates this device's stack function is enabled. The value disabled(2)
indicates this device's stack function is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.183.1.1 |
hwStackTopoTypeThe topology of stack.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.2 |
hwStackMacAddressSwitchTimeStack system's MAC address switch time.rw Integer32 (0..60 | 255) .1.3.6.1.4.1.2011.5.25.183.1.3 |
hwStackSystemMacThe stack system's MAC address, it always be the master
device's MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.183.1.4 |
hwStackIsStackDeviceThe value true(1) indicates that the device's stack
function is enable and it is in a stack system. When
false(2), the stack function is not enable or it is
not in a stack system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.183.1.5 |
hwStackReservedVlanIdStack reserved-vlanId.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.6 |
hwStackClearUnsupportCfgClear the config which is not support stack.rw Integer32 (1) .1.3.6.1.4.1.2011.5.25.183.1.7 |
hwStackLinkAlarmThresholdThe alarm threshold of stack link.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.8 |
hwStackMemberThresholdMaximum number of stack members.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.9 |
hwStackModeThe mode of stack.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.1.10 |
hwStackMemberSpecUpper limit of the stack members.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.11 |
hwStackMacAddressAlarmTimeStack system's MAC address inconsistence-alarm time.rw Integer32 (0..60 | 255) .1.3.6.1.4.1.2011.5.25.183.1.12 |
hwLeafMaxNumberThe maximum number of leaf switches on the LPU.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.13 |
hwStackMemberInfoTableTable of stack member switches. SEQUENCE OF HwStackMemberInfoEntry .1.3.6.1.4.1.2011.5.25.183.1.20 |
hwStackMemberInfoEntryProvide information of stack member. HwStackMemberInfoEntry .1.3.6.1.4.1.2011.5.25.183.1.20.1 |
hwMemberCurrentStackIdCurrent stack ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.20.1.1 |
hwMemberStackPriorityStack member's priority.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.20.1.2 |
hwMemberStackRoleThe role of stack device in stack system.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.20.1.3 |
hwMemberStackMacAddressMAC address of the stack device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.20.1.4 |
hwMemberStackDeviceTypeDevice type of the stack device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.20.1.5 |
hwMemberConfigStackIdSet stack device stack ID.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.20.1.6 |
hwMemberStackObjectIdThe vendor's authoritative identification of the
network management subsystem contained in the
entity. This value is allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and provides an
easy and unambiguous means for determining `what
kind of box' is being managed. For example, if
vendor `Flintstones, Inc.' was assigned the
subtree 1.3.6.1.4.1.4242, it could assign the
identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
Router'.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.1.20.1.7 |
hwStackPortTableTable of stack port. SEQUENCE OF HwStackPortEntry .1.3.6.1.4.1.2011.5.25.183.1.21 |
hwStackPortEntryProvide information of the stack port. HwStackPortEntry .1.3.6.1.4.1.2011.5.25.183.1.21.1 |
hwStackPortStackIdStack device's ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.21.1.1 |
hwStackPortIdStack port ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.21.1.2 |
hwStackPortNameStack port name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.21.1.3 |
hwStackNeighborInfoStack neighbor ID.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.21.1.4 |
hwStackPortStatusThe status of the stack port.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.21.1.5 |
hwStackEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.1.22 |
hwStackLinkUpWhen the stack link turn to up status,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.1 |
hwStackLinkDownWhen the stack link turn to down status,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.2 |
hwStackStandbyChangeWhen the stack standby device change,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.3 |
hwStackSwitchOverWhen the stack main device change,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.4 |
hwStackSystemRestartWhen the stack system restart,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.5 |
hwStackStackMemberAddWhen a stack member join in,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.6 |
hwStackStackMemberLeaveWhen a stack member leave,
send a SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.7 |
hwStackStackMacChangeWhen the main stack device change, the stack system's
MAC address should change also. And we can set the MAC
address change time. When the MAC address change,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.8 |
hwStackLogicStackPortLinkErrWhen the stack port connect error,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.9 |
hwStackPhyStackPortLinkErrWhen the stack port connect error,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.10 |
hwPhyStackPortIsDownWhen the stack port link state is down,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.11 |
hwPhyStackPortIsUpWhen the stack port link state is up,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.12 |
hwStackLogicStackPortLinkErrResumeWhen the wrong link in stack port resumed,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.13 |
hwStackPortConfigureFailedWhen failed to configure the stack port,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.14 |
hwStackLinkLimitAlarmWhen the number of STACK links has reached alarm threshold,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.15 |
hwStackLinkLimitAlarmResumeWhen the number of STACK links is equal or more than alarm threshold,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.16 |
hwStackConfigConflictWhen the stack configuration conflicts, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.17 |
hwStackFabricPortLinkErrWhen the interface Fabric-Port link is invalidly, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.18 |
hwStackFabricPortLinkErrResumeWhen the interface Fabric-Port link is resumed, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.19 |
hwStackLeafSingleHomedAlarmWhen the leaf switch is only linked to one spine switch, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.20 |
hwStackLeafSingleHomedAlarmResumeWhen the single-homed leaf switch leaves the stack system or turns to the dual-homed mode, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.21 |
hwStackMemberLimitWhen the number of stack members has reached the upper limit and new members failed to join, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.22 |
hwStackMemberAddWhen a stack member join in,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.23 |
hwStackMemberLeaveWhen a stack member leave,
send a SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.24 |
hwStackConfigDifferentWhen the stack configuration of the current startup is different from that of next startup,
send a SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.25 |
hwStackLeafConfigConflictWhen configuration exists on the uplink port of the leaf switch, and this port cannot be used as the fabric port, send a SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.26 |
hwStackChipSingleHomedAlarmIn the dual-homing network, when two ports of any chip on the dual-chip leaf switch are connected to a spine switch, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.27 |
hwStackChipSingleHomedAlarmResumeIn the dual-homing network, when two ports of any chip on the dual-chip leaf switch are not connected to a spine switch, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.28 |
hwStackLeafMemberAddWhen a leaf member join in,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.29 |
hwFabricLinkLimitAlarmWhen the number of fabric links has reached alarm threshold,send
a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.30 |
hwFabricLinkLimitAlarmResumeWhen the number of fabric links is equal or more than alarm threshold,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.31 |
hwStackMemberExceedSpecThe number of stack members exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.32 |
hwStackMacInconsistenceWhen the stack system's MAC address is not the manufacture MAC address of any member device,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.33 |
hwStackMacInconsistenceResumeWhen the stack system's MAC address is the manufacture MAC address of a member device,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.34 |
hwFabricLinkProtocolAlarmWhen the fabric link protocol state of the fabric port is down, send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.35 |
hwFabricLinkProtocolAlarmResumeWhen the fabric link protocol state of the fabric port is up or the fabric port does not exist, send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.36 |
hwFabricMemberPortProtocolAlarmWhen the fabric link protocol state of the member port is down, send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.37 |
hwFabricMemberPortProtocolAlarmResumeWhen the fabric link protocol state of the member port is up or the fabric member port does not exist, send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.38 |
hwLeafMaxNumberExceededAlarmWhen the number of leaf switches connected to the LPU exceeds the maximum,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.39 |
hwLeafMaxNumberExceededAlarmResumeWhen the number of leaf switches connected to the LPU is recovered to be within the maximum,
send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.1.22.40 |
hwStackMemberPortEnableTableTable of stack physical port. SEQUENCE OF HwStackMemberPortEnableEntry .1.3.6.1.4.1.2011.5.25.183.1.23 |
hwStackMemberPortEnableEntryProvide information of the physical port. HwStackMemberPortEnableEntry .1.3.6.1.4.1.2011.5.25.183.1.23.1 |
hwEnableStackModeIf enable stack mode.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.1.23.1.1 |
hwAddingPhyPortToStackPortTableTable of a stack port's member port. SEQUENCE OF HwAddingPhyPortToStackPortEntry .1.3.6.1.4.1.2011.5.25.183.1.24 |
hwAddingPhyPortToStackPortEntryProvide information of a stack port's member port. HwAddingPhyPortToStackPortEntry .1.3.6.1.4.1.2011.5.25.183.1.24.1 |
hwEnabledStackModePhyPortIndexEnabled stack mode's physical namero Integer32 .1.3.6.1.4.1.2011.5.25.183.1.24.1.1 |
hwStackPortIDadding to which stack port
1: added to stack port 1
2: added to stack port 2
3: did not add to any stack portrw Enumeration .1.3.6.1.4.1.2011.5.25.183.1.24.1.2 |
hwStackMemberInformationTableTable of stack member switches. SEQUENCE OF HwStackMemberInformationEntry .1.3.6.1.4.1.2011.5.25.183.1.25 |
hwStackMemberInformationEntryProvide information of stack member. HwStackMemberInformationEntry .1.3.6.1.4.1.2011.5.25.183.1.25.1 |
hwStackIdIndexStack ID Index. Integer32 .1.3.6.1.4.1.2011.5.25.183.1.25.1.1 |
hwStackPriorityStack member's priority. -1 indicates an invalid value.rw Integer32 (-1..255) .1.3.6.1.4.1.2011.5.25.183.1.25.1.2 |
hwStackRoleThe role of stack device in stack system.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.25.1.3 |
hwStackMacAddressMAC address of the stack device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.183.1.25.1.4 |
hwStackDeviceTypeDevice type of the stack device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.25.1.5 |
hwStackIdCurrent stack ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.25.1.6 |
hwStackConfigIdSet stack device stack ID. -1 indicates an invalid value.rw Integer32 (-1..254) .1.3.6.1.4.1.2011.5.25.183.1.25.1.7 |
hwStackSysOidSysoid of the stack device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.25.1.8 |
hwStackDescriptionDescription of the stack device.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.25.1.9 |
hwAddingPhyPortToFabricPortTableTable of a fabric port's member port. SEQUENCE OF HwAddingPhyPortToFabricPortEntry .1.3.6.1.4.1.2011.5.25.183.1.26 |
hwAddingPhyPortToFabricPortEntryProvide information of a fabric port's member port. HwAddingPhyPortToFabricPortEntry .1.3.6.1.4.1.2011.5.25.183.1.26.1 |
hwEnabledStackModePortIndexEnabled stack mode's physical Indexro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.26.1.1 |
hwFabricPortIDadding to which fabric port
0: did not add to any fabric port
1: added to fabric port 1rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.26.1.2 |
hwFabricPortTableTable of fabric port. SEQUENCE OF HwFabricPortEntry .1.3.6.1.4.1.2011.5.25.183.1.27 |
hwFabricPortEntryProvide information of the fabric port. HwFabricPortEntry .1.3.6.1.4.1.2011.5.25.183.1.27.1 |
hwFabricPortIndexIndex of the fabric port.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.27.1.1 |
hwFabricMemberIDMember device's ID of the fabric port.rw Integer32 (0 | 101..254) .1.3.6.1.4.1.2011.5.25.183.1.27.1.2 |
hwFabricLoadBalanceThe loadBalance of the fabric port:
sourceMac(1):According to source MAC hash arithmetic.
destinationMac(2):According to destination MAC hash arithmetic
sourceAndDestinationMac(3):According to source/destination MAC hash arithmetic.
sourceIp(4):According to source IP hash arithmetic.
destinationIp(5):According to destination IP hash arithmetic.
sourceAndDestinationIp(6):According to source/destination IP hash arithmetic.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.1.27.1.3 |
hwFabricProtocolStateThe protocol state of the fabric port.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.27.1.4 |
hwFabricConfiguredLinkNumThe configured alarm threshold of minimum fabric link number.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.27.1.5 |
hwFabricPhyLinkTableTable of fabric physical link information. SEQUENCE OF HwFabricPhyLinkEntry .1.3.6.1.4.1.2011.5.25.183.1.28 |
hwFabricPhyLinkEntryProvide information of fabric physical link . HwFabricPhyLinkEntry .1.3.6.1.4.1.2011.5.25.183.1.28.1 |
hwSpinePortIndexSpine port physical index. Integer32 .1.3.6.1.4.1.2011.5.25.183.1.28.1.1 |
hwSpineStackIdSpine stack device's ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.28.1.2 |
hwSpinePortNameSpine stack port name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.28.1.3 |
hwSpinePortStatusProtocol status of the spine member port.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.28.1.4 |
hwLeafPortIndexLeaf port physical index, and -1 indicates an invalid value.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.28.1.5 |
hwLeafStackIdLeaf device's ID, and -1 indicates an invalid value.ro Integer32 (-1 | 101..255) .1.3.6.1.4.1.2011.5.25.183.1.28.1.6 |
hwLeafPortNameLeaf port name, and null indicates an invalid value.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.28.1.7 |
hwLeafPortStatusProtocol status of the leaf member port, and null indicates an invalid value.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.28.1.8 |
hwStackUpgradeTableA table of flash copy operation entries. Each
entry represents a flash copy operation (to flash)
that has been initiated. SEQUENCE OF HwStackUpgradeEntry .1.3.6.1.4.1.2011.5.25.183.1.30 |
hwStackUpgradeEntryA flash copy operation entry. Each entry consists
of a command, a source, and optional parameters such
as protocol to be used, a destination, a server address,
etc.
A management station wishing to create an entry should
first generate a pseudo-random serial number to be used
as the index to this sparse table. The station should
then create the associated instance of the row status
object. It must also, either in the same or in successive
PDUs, create the associated instance of the command and
parameter objects. It should also modify the default values
for any of the parameter objects if the defaults are not
appropriate.
Once the appropriate instances of all the command
objects have been created, either by an explicit SNMP
set request or by default, the row status should be set
to active to initiate the operation. Note that this entire
procedure may be initiated via a single set request which
specifies a row status of createAndGo as well as specifies
valid values for the non-defaulted parameter objects.
Once an operation has been activated, it cannot be stopped.
Once the operation completes, the management station should
retrieve the value of the status object, and delete the entry.
In order to prevent old entries from clogging the table,
entries will be aged out, but an entry will never be deleted
within 2 hours of completing. HwStackUpgradeEntry .1.3.6.1.4.1.2011.5.25.183.1.30.1 |
hwStackUpgradeIndexSpecifies the index of an entry. It is a
random value when creating an entry. Integer32 .1.3.6.1.4.1.2011.5.25.183.1.30.1.1 |
hwStackUpgradeGrpTypeType of stack grouping member switches.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.1.30.1.2 |
hwStackUpgradeGrpValueDetails about stack grouping member switches for memberIdList.
Optional, This object will be ignored for allMembers .rw OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.30.1.3 |
hwStackUpgradeFileTypeType of the file to be upgraded.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.1.30.1.4 |
hwStackUpgradeFileInfoPath and type of the file to be upgraded.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.30.1.5 |
hwStackUpgradeFtpIpThe address of remote host acting as server for any operation.
The default value of which is 255.255.255.255.rw IpAddress .1.3.6.1.4.1.2011.5.25.183.1.30.1.6 |
hwStackUpgradeFtpUserNameWhen use FTP to transfer files, the user name must be
specified by this node.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.30.1.7 |
hwStackUpgradeFtpPasswordRemote user password for copy via FTP protocol.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.30.1.8 |
hwStackUpgradeServerPortThis object specifies the SFTP server port that is used for file transfer
only SFTP is valid. The default SFTP server port is 22 if no port is specified.
If the value of protocol is not SFTP, this object is ignored by the
implementation.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.30.1.9 |
hwStackUpgradeFileSizeThis object specifies the reserved space (in BYTE) guaranteed by a host.
The value 0 indicates that no space need be reserved. This object is optional
in the Set operation of file upload. The default value is 0. This object is unavailable
in the Set operation of file download.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.1.30.1.10 |
hwStackUpgradeTransmitProtocolSpecifies the protocol used to transfer file.
The default value of it is FTP.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.1.30.1.11 |
hwStackUpgradeRowStatusThe status of this table entry. Only used createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.183.1.30.1.51 |
hwStackUpgradeResultTableResults of upgrade commands returned from stack member switches. SEQUENCE OF HwStackUpgradeResultEntry .1.3.6.1.4.1.2011.5.25.183.1.31 |
hwStackUpgradeResultEntryProvides the result of stack switchs upgrade entry. HwStackUpgradeResultEntry .1.3.6.1.4.1.2011.5.25.183.1.31.1 |
hwStackUpgradeResultIndexSpecifies the index of an entry. It is a
random value when creating an entry. Integer32 .1.3.6.1.4.1.2011.5.25.183.1.31.1.1 |
hwStackUpgradeResultMemberIdIdentifier of the stack member switch.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.31.1.2 |
hwStackUpgradeResultResults of upgrade commands returned from stack member switches.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.31.1.3 |
hwStackUpgradeResultInProcessThe upgrade is in process.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.31.1.4 |
hwStackUpgradeResultFailReasonThe status of operation. Only upgrade failure valid.
The status of the specified operation can be one of the follows.
opUpgradeSuccess(1): upgrade success.
opMasterDiskNoSpace(2): flash of master device is no enough space.
opNonmasterDiskNoSpace(3): flash of non-master device is no enough space.
opInvalidFileInfo(4) :invalid source file name or path is specified.
opInvalidFileType(5) :invalid file type.
opInvalidServerAddress(6) :invalid server address is specified.
opInvalidUserOrPassword(7):invalid server user or password.
opDeviceBusy(8) :the device is in use and locked by another process
opFileTransferError(9) :file transfer was unsuccessfull.
opFileChecksumError(10) :file checksum in Flash si invalid.
opNoMemory(11) :system is running in low on memory.
opVersionFileNotMatch(12) : the version file does not match the device type.
opUpgradeDeviceAbsent(13) : device absent.
opUnknownFailure(14) :failure which is unknown.
opUpgradeInvalidValue(15):invalid value.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.1.31.1.5 |
hwStackTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.1.32 |
hwStackLocalIfNameInterface name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.1 |
hwStackPeerIfNameThe peer interface name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.2 |
hwStackConnectErrReasonConnection error reason.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.3 |
hwConfigureFailedStackIdSlot id.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.4 |
hwCssTrapErrorPortIdError PortId.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.5 |
hwStackConnectMethodSRUC Vs08 Connect Suggest.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.6 |
hwStackCfgConflictStackIdStack ID of the device whose stack configuration conflicts with that of the device sending alarms.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.32.7 |
hwStackFabricPortFabric port interface name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.8 |
hwStackFabricMemberPortThe fabric local interface name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.9 |
hwStackMemberIdThe stack member ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.32.10 |
hwStackLeafMemberIdThe leaf switch member ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.32.11 |
hwStackReasonThe reason for different stack configurations.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.12 |
hwStackLeafPortThe leaf switch interface name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.1.32.13 |
hwStackCurrentLinkNumThe current number of member port in Stack-Port, which protocol state is up.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.32.14 |
hwFabricCurrentLinkNumThe current number of member port in Fabric-Port, which protocol state is up.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.1.32.15 |
hwCssObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.3 |
hwCssGlobalObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.3.1 |
hwCssEnableCSS enable status.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.183.3.1.1 |
hwCssMemberInfoTableTable of CSS member information. SEQUENCE OF HwCssMemberInfoEntry .1.3.6.1.4.1.2011.5.25.183.3.2 |
hwCssMemberInfoEntryEntry of CSS member information table. HwCssMemberInfoEntry .1.3.6.1.4.1.2011.5.25.183.3.2.1 |
hwCssMemberFrameIdFrame id for CSS member.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.2.1.1 |
hwCssMemberConfigFrameIdConfigured frame id for CSS member.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.3.2.1.2 |
hwCssMemberPriorityPriority for CSS member.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.2.1.3 |
hwCssMemberConfigPriorityConfigured priority for CSS member.rw Integer32 .1.3.6.1.4.1.2011.5.25.183.3.2.1.4 |
hwCssMemberMasterForceForce master status for CSS member.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.3.2.1.5 |
hwCssMemberConfigMasterForceConfigured force master status CSS member.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.3.2.1.6 |
hwCssMemberConfigEnableConfigured enable status for CSS member.rw Enumeration .1.3.6.1.4.1.2011.5.25.183.3.2.1.7 |
hwCssMemberRoleCSS member's role define.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.3.2.1.8 |
hwCssTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.3.3 |
hwCssTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.3.3.1 |
hwCssTrapFrameId1CSS trap message frame id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.1 |
hwCssTrapSlotId1CSS trap message slot id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.2 |
hwCssTrapPortId1CSS trap message port id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.3 |
hwCssTrapFrameId2CSS trap message frame id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.4 |
hwCssTrapSlotId2CSS trap message slot id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.5 |
hwCssTrapPortId2CSS trap message port id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.6 |
hwCssTrapFrameId3CSS trap message frame id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.7 |
hwCssTrapSlotId3CSS trap message slot id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.8 |
hwCssTrapPortId3CSS trap message port id parameter.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.3.1.9 |
hwCssTrapConfigureFailedSlotIdCSS configure failed trap message slot id parameter.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.3.3.1.10 |
hwCssTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.3.3.2 |
hwCssLinkDownCSS link down trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.1 |
hwCssLinkUpCSS link up trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.2 |
hwCssSwitchOverCSS switch over trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.3 |
hwCssConnectErrorCSS connect error trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.4 |
hwCssSplitCSS split trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.5 |
hwCssEstablishCSS establish trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.6 |
hwCssFastUpgradeFailCSS fast upgrade fail. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.7 |
hwCssPhyCsuConnectErrorCSS connect error trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.8 |
hwCssLpuInvalidLicenseThe license of controlling Lpu-based CSS function is invalid. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.9 |
hwCssPortConfigureFailedCSS port configure failed trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.10 |
hwCssPortUpDownAlarmCSS port link flapping repeatedly message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.11 |
hwCssPortCrcErrorAlarmCSS port continuously receives CRC error packets message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.12 |
hwCssPortErrorDownCSS port turn into error-down state message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.13 |
hwCssPortErrorDownRecoverCSS port recovered from error-down state message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.14 |
hwCssPhyVs08ConnectErrorCSS connect error trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.15 |
hwCssStandbyErrorThe CSS enters the standby-no-MPU state trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.16 |
hwCssStandbyErrorRestoreThe CSS is recovered from the standby-no-MPU state trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.17 |
hwCssPortStateErrorCSS port error trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.18 |
hwCssPhyCardConnectErrorCSS connect error trap message. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.183.3.3.2.19 |
hwCssPortInfoTableTable of CSS port information. SEQUENCE OF HwCssPortInfoEntry .1.3.6.1.4.1.2011.5.25.183.3.4 |
hwCssPortInfoEntryEntry of CSS port information table. HwCssPortInfoEntry .1.3.6.1.4.1.2011.5.25.183.3.4.1 |
hwCssPortFrameIdFrame id of CSS port. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.4.1.1 |
hwCssPortSlotIdSlot id of CSS port. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.4.1.2 |
hwCssPortCardIdCard id of CSS port. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.4.1.3 |
hwCssPortPortIdPort id of CSS port. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.4.1.4 |
hwCssPortNamePort name of CSS port.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.3.4.1.5 |
hwCssPortSpeedSpeed of CSS port.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.3.4.1.6 |
hwCssPortOperStatusOper status of CSS port.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.3.4.1.7 |
hwCssPortAdminStatusAdmin status of CSS port.ro Enumeration .1.3.6.1.4.1.2011.5.25.183.3.4.1.8 |
hwCssPortInOctetsThe total number of octets received on the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.9 |
hwCssPortInUcastPktsThe total number of unicast packets received on the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.10 |
hwCssPortInMcastPktsThe total number of multicast packets received on the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.11 |
hwCssPortInBcastPktsThe total number of broadcast packets received on the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.12 |
hwCssPortInDiscardsThe number of inbound packets which were discarded.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.13 |
hwCssPortInErrorsThe number of inbound packets which were error.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.14 |
hwCssPortInCRCErrorsThe number of inbound packets which were CRC error.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.15 |
hwCssPortOutOctetsThe total number of octets sent on the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.16 |
hwCssPortOutUcastPktsThe total number of unicast packets sent from the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.17 |
hwCssPortOutMcastPktsThe total number of multicast packets sent from the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.18 |
hwCssPortOutBcastPktsThe total number of broadcast packets sent from the interface.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.19 |
hwCssPortOutDiscardsThe number of outbound packets which were discarded.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.20 |
hwCssPortOutErrorsThe number of outbound packets which were error.ro Counter64 .1.3.6.1.4.1.2011.5.25.183.3.4.1.21 |
hwCssLinkInfoTableTable of CSS link information. SEQUENCE OF HwCssLinkInfoEntry .1.3.6.1.4.1.2011.5.25.183.3.5 |
hwCssLinkInfoEntryEntry of CSS link information table. HwCssLinkInfoEntry .1.3.6.1.4.1.2011.5.25.183.3.5.1 |
hwCssLinkLocFrameIdLocal frame id of CSS link. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.1 |
hwCssLinkLocSlotIdLocal slot id of CSS link. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.2 |
hwCssLinkLocCardIdLocal card id of CSS link. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.3 |
hwCssLinkLocPortIdLocal port id of CSS link. Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.4 |
hwCssLinkLocPortNameLocal port name of CSS link.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.3.5.1.5 |
hwCssLinkRemFrameIdRemote frame id of CSS link.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.6 |
hwCssLinkRemSlotIdRemote slot id of CSS link.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.7 |
hwCssLinkRemCardIdRemote card id of CSS link.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.8 |
hwCssLinkRemPortIdRemote port id of CSS link.ro Integer32 .1.3.6.1.4.1.2011.5.25.183.3.5.1.9 |
hwCssLinkRemPortNameRemote port name of CSS link.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.3.5.1.10 |
hwCssLinkSpeedSpeed of CSS link.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.183.3.5.1.11 |
hwStackConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.100 |
hwStackCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.100.1 |
hwStackGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.100.1.2 |
hwCssConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.101 |
hwCssCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.101.1 |
hwCssGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.183.101.1.2 |