HUAWEI-SLB-MIB
The HUAWEI-SLB-MIB module provides SNMP-based monitoring and management of Huawei Server Load Balancer (SLB) devices, exposing critical metrics such as virtual server status, pool member health states, active session counts, and traffic throughput statistics. This MIB enables the tracking of load balancing distribution efficiency, connection failover events, and resource utilization across SLB clusters to ensure service availability and performance.
Imported Objects
Objects
31 total| Object Name |
|---|
hwSLBMIBThe MIB describes Server Load Balance MODULE-IDENTITY .1.3.6.1.4.1.2011.25.225 |
hwSlbMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.225.1 |
hwSlbTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.225.1.1 |
hwIpAddressThe object indicates the IP address of a load balance member.ro IpAddress .1.3.6.1.4.1.2011.25.225.1.1.1 |
hwMemberNameThe object indicates the member in a load balance group, each member in the load balance group will provide
same services to clients, system will select one member to serve the clients' requests.ro OCTET STRING .1.3.6.1.4.1.2011.25.225.1.1.2 |
hwGroupNameThe object indicates the group name of members, each group members may contain same services and typically reside
in the same physical location in a data center.ro OCTET STRING .1.3.6.1.4.1.2011.25.225.1.1.3 |
hwPortThe TCP or UDP port number, the range can from 1 to 65535.ro Integer32 .1.3.6.1.4.1.2011.25.225.1.1.4 |
hwProbeNameThe object indicates a probe that is used to detect failures for members in a group.
When you initially configure a health probe, you should define its type and name.ro OCTET STRING .1.3.6.1.4.1.2011.25.225.1.1.5 |
hwProbeTypeThe object indicates probe type. S9300 support ICMP, TCP, UDP, HTTP probe types.ro Enumeration .1.3.6.1.4.1.2011.25.225.1.1.6 |
hwConnectionNumThe object indicates the connection number of a group member, usually five-tuple is used to
describe a connection(source IP, detination IP, source port, destination port, protocal).ro Integer32 .1.3.6.1.4.1.2011.25.225.1.1.7 |
hwMasterGroupThe object indicates the master group.
In order to improve reliability, S9300 can bind master group and backup group together to provide load
balance service, operators can config two load balance group: one as master, the other as backupro OCTET STRING .1.3.6.1.4.1.2011.25.225.1.1.8 |
hwMasterGroupActiveNumThe object indicates the active member number in the master server group.ro Integer32 .1.3.6.1.4.1.2011.25.225.1.1.9 |
hwMasterGroupTotalNumThe object indicates the total number of in-service members in the master group.ro Integer32 .1.3.6.1.4.1.2011.25.225.1.1.10 |
hwBackupGroupThe object indicates the backup group.
In order to improve reliability, S9300 can bind master group and backup group together to provide load
balance service, operators can config two load balance group one as master, the other as backupro OCTET STRING .1.3.6.1.4.1.2011.25.225.1.1.11 |
hwBackupGroupActiveNumThe object indicates the active member number in the backup server group.ro Integer32 .1.3.6.1.4.1.2011.25.225.1.1.12 |
hwBackupGroupTotalNumThe object indicates the total number of in-service members in the backup group.ro Integer32 .1.3.6.1.4.1.2011.25.225.1.1.13 |
hwActionNameThe object indicates the policy action. Operators can define different actions
for clients request: forward packets, drop packets, load balance, sticky load balance.ro OCTET STRING .1.3.6.1.4.1.2011.25.225.1.1.14 |
hwCurWorkGroupNameThe object indicates the current working group, the working group may be master group or backup group.ro OCTET STRING .1.3.6.1.4.1.2011.25.225.1.1.15 |
hwSlbNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.225.1.2 |
hwMemberInstanceStateUpMember state changes to up. S9300 will select the member to accept clients' new requests. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.1 |
hwMemberInstanceStateDownMember state changes to down. S9300 will not select the member when clients' new requests come. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.2 |
hwGroupStateSwitchoverWhen there are members' state change, current work group may change from master group to backup group
or from backup group to master group. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.3 |
hwMemberConnectionFullThe connections for the physical member attains threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.4 |
hwMemberConnectionFullRestoreThe connections for the physical member restores to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.5 |
hwMemberInstanceConnectionFullThe connections for the group member attains threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.6 |
hwMemberInstanceConnectionFullRestoreThe connections for the group member restores nomal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.7 |
hwProbeInstanceStateUpProbe is used to check load balance member health, when there are expected response from load balance
member, probe state will change to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.8 |
hwProbeInstanceStateDownProbe is used to check load balance member health, when there are no expected response from load balance
member, probe state will change to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.225.1.2.9 |
hwSlbConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.225.1.3 |
hwSlbGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.225.1.3.1 |
hwSlbCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.225.1.3.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.