HUAWEI-IPDSLAM-VMAC-MIB
AI MIB Summary
The HUAWEI-IPDSLAM-VMAC-MIB module provides management interfaces for Huawei IP DSLAM devices to monitor and control Virtual MAC (VMAC) features, specifically tracking MAC address spoofing events and resolving connectivity conflicts caused by duplicate subscriber MAC addresses on BRAS networks.
The mib module is used for defining VMAC feature, which is a solution to following problems: BRAS MAC address spoofing, MAC address spoofing among subscribers and two subscribers with the same MAC address cannot access the Internet if certain network adapters have the same MAC address.
Main OID:
hwIpDslamVmac.1.3.6.1.4.1.2011.6.110
35
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
hwIpDslamVmacThe mib module is used for defining VMAC feature, which is a solution to following problems: BRAS MAC address spoofing,
MAC address spoofing among subscribers and two subscribers with the same MAC address cannot access the Internet
if certain network adapters have the same MAC address. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.110 |
IF-MIBThe mib module is used for defining VMAC feature, which is a solution to following problems: BRAS MAC address spoofing,
MAC address spoofing among subscribers and two subscribers with the same MAC address cannot access the Internet
if certain network adapters have the same MAC address. Unknown .1.3.6.1.4.1.2011.6.110 |
hwIpDslamVmacStatusIdentifies the global status of the VMAC function.
Options:
1. macpoolMode(1) -indicates the global status of the VMAC function is macpoolMode
2. disabled(2) -indicates the global status of the VMAC function is disabled
3. dslamIdMode(3) -indicates the global status of the VMAC function is dslamIdMode
Default: disabled(2)
It is used to query and set the VMAC status.rw Enumeration .1.3.6.1.4.1.2011.6.110.1 |
hwIpDslamVmacPortVmacNumIdentifies the number of VMAC addresses of each port, which is used for
setting or querying the number of VMAC addresses of a port.
Range: 1-32
Default: 32rw Integer32 .1.3.6.1.4.1.2011.6.110.2 |
hwIpDslamVmacAllocationTableVMAC allocation mapping table.
The indexes of this table are hwIpDslamVmacAllocationIfIndex, hwIpDslamVmacAllocationStartmac
and hwIpDslamVmacAllocationScope. SEQUENCE OF HwIpDslamVmacAllocationEntry .1.3.6.1.4.1.2011.6.110.3 |
hwIpDslamVmacAllocationEntryVMAC allocation mapping table.
The indexes of this entry are hwIpDslamVmacAllocationIfIndex, hwIpDslamVmacAllocationStartmac
and hwIpDslamVmacAllocationScope. HwIpDslamVmacAllocationEntry .1.3.6.1.4.1.2011.6.110.3.1 |
hwIpDslamVmacAllocationIfIndexThe value of this object uniquely identifies this VMAC allocation mapping table entry.ro Integer32 .1.3.6.1.4.1.2011.6.110.3.1.1 |
hwIpDslamVmacAllocationStartmacThe start MAC of VMAC allocation mapping table.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.110.3.1.2 |
hwIpDslamVmacAllocationScopeThe scope of VMAC allocation mapping table.ro Integer32 .1.3.6.1.4.1.2011.6.110.3.1.3 |
hwIpDslamVmacUmacMappingTableIndicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The index of this table is hwIpDslamVmacUmacMappingIfIndex. SEQUENCE OF HwIpDslamVmacUmacMappingEntry .1.3.6.1.4.1.2011.6.110.4 |
hwIpDslamVmacUmacMappingEntryIndicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The index of this entry is hwIpDslamVmacUmacMappingIfIndex. HwIpDslamVmacUmacMappingEntry .1.3.6.1.4.1.2011.6.110.4.1 |
hwIpDslamVmacUmacMappingIfIndexIndicates the index of hwIpDslamVmacUmacMappingTable, which is used for specifying
the VMAC address and the UMAC address of a port. It is determined by the shelf ID,
slot ID, and port ID.ro Integer32 .1.3.6.1.4.1.2011.6.110.4.1.1 |
hwIpDslamVmacUmacMappingVmacAddressIndicates the VMAC address in hwIpDslamVmacUmacMappingTable. It is a character
string consisting of 1-32 VMAC addresses of a port.ro OCTET STRING .1.3.6.1.4.1.2011.6.110.4.1.2 |
hwIpDslamVmacUmacMappingUmacAddressIndicates the UMAC address in hwIpDslamVmacUmacMappingTable. It is a character
string consisting of 1-32 VMAC addresses of a port.ro OCTET STRING .1.3.6.1.4.1.2011.6.110.4.1.3 |
hwIpDslamVmacDslamIdIdentifies the DSLAM ID, which is used for setting or querying the DSLAM ID.
Range: 0x0-0xFFFFFFFF
Default: 0x7FFFF
When the VMAC function is enabled based on DSLAM ID, the DSLAM ID and the
reserved bits must be configured, and the DSLAM ID must be smaller than or
equal to 0x7FFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.110.5 |
hwIpDslamVmacReserveBitsIdentifies the reserved bits in a VMAC address, which occupies 6 bits.rw Unsigned32 .1.3.6.1.4.1.2011.6.110.6 |
hwIpDslamIPoEMacModeUsed for setting and querying the MAC address mode of a dynamic IPoE user.
Options:
1. multiMac(1) -indicates the MAC address mode is multiMac
2. singleMac(2) -indicates the MAC address mode is singleMac
Default: multiMac(1)rw Enumeration .1.3.6.1.4.1.2011.6.110.7 |
hwIpDslamVmacOltIdIdentifies the OLT ID, which is used for setting or querying the OLT ID.
Range: 0x0-0xFFFF
Default: 0xFFFF
When the VMAC function is enabled based on OLT ID, the OLT ID and the
reserved bits must be configured.rw Unsigned32 .1.3.6.1.4.1.2011.6.110.8 |
hwIpDslamVmacOntVmacNumIdentifies the number of VMAC addresses of each ONT, which is used for
setting or querying the number of VMAC addresses of an ONT.
Range: 1-8
Default: 8rw Integer32 .1.3.6.1.4.1.2011.6.110.9 |
hwOltVmacUmacMappingTableIndicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The indexes of this table are hwOltVmacUmacMappingIfIndex and
hwOltVmacUmacMappingOntID. SEQUENCE OF HwOltVmacUmacMappingEntry .1.3.6.1.4.1.2011.6.110.10 |
hwOltVmacUmacMappingEntryIndicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The indexes of this entry are hwOltVmacUmacMappingIfIndex and
hwOltVmacUmacMappingOntID. HwOltVmacUmacMappingEntry .1.3.6.1.4.1.2011.6.110.10.1 |
hwOltVmacUmacMappingIfIndexIndicates one index of hwOltVmacUmacMappingTable, which is used for specifying
the VMAC address and the UMAC address of an ONT. It is determined by the shelf ID,
slot ID, and port ID. Integer32 .1.3.6.1.4.1.2011.6.110.10.1.1 |
hwOltVmacUmacMappingOntIDIndicates one index of hwOltVmacUmacMappingTable, which is used for specifying
the VMAC address and the UMAC address of an ONT. Integer32 .1.3.6.1.4.1.2011.6.110.10.1.2 |
hwOltVmacUmacMappingVmacAddressIndicates the VMAC address in hwOltVmacUmacMappingTable. It is a character
string consisting of 1-8 VMAC addresses of an ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.110.10.1.3 |
hwOltVmacUmacMappingUmacAddressIndicates the UMAC address in hwOltVmacUmacMappingTable. It is a character
string consisting of 1-8 VMAC addresses of an ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.110.10.1.4 |
hwIpDslamVmacControlprotocolIpv6oeStatusIt is used to query and set the VMAC control protocol of IPv6oE status.
Options:
1. disable(1) -indicates the VMAC control protocol of IPv6oE status disable
2. enable(2) -indicates the VMAC control protocol of IPv6oE status enable
Default: disable(1)rw Enumeration .1.3.6.1.4.1.2011.6.110.11 |
hwIpDslamVmacSlotNumberingIt is used to query and set the VMAC slot number format.
Options:
1. logical(1) -indicates the VMAC slot number format is logical
2. physical(2) -indicates the VMAC slot number format is physical
3. default(3) -Indicates that the slot number for the port-based VMAC
address is a physical slot number. However, the slot number
for the ONT-based VMAC address is equal to the physical
slot number + 1. That is, for the ONT-based VMAC address,
this parameter does not indicate the physical slot number or
the logical slot number.
Default: default(3)rw Enumeration .1.3.6.1.4.1.2011.6.110.12 |
hwIpDslamVmacPortBeginIt is used to query and set the starting portid of VMAC.
Range: 0-1, 4294967295
Default: 4294967295
The value 4294967295 indicates that the port-based VMAC starting portid is 0, but
the ONT-based VMAC starting portid is 1rw Unsigned32(0..1 | 4294967295) .1.3.6.1.4.1.2011.6.110.13 |
hwIPoESmacCurrentUserTableUsed for querying the information about a IPoE single-MAC user.
The indexes of this table are ifIndex and hwIPoESmacUserIndex. SEQUENCE OF HwIPoESmacCurrentUserEntry .1.3.6.1.4.1.2011.6.110.14 |
hwIPoESmacCurrentUserEntryUsed for querying the information about a IPoE single-MAC user.
The indexes of this entry are ifIndex and hwIPoESmacUserIndex. HwIPoESmacCurrentUserEntry .1.3.6.1.4.1.2011.6.110.14.1 |
hwIPoESmacUserIndexIPoE SMAC user index.ro Integer32 .1.3.6.1.4.1.2011.6.110.14.1.1 |
hwIPoESmacUserFlowIdIPoE user flow ID.ro Integer32 .1.3.6.1.4.1.2011.6.110.14.1.2 |
hwIPoESmacUserIPAdressIPoE SMAC user IpAddress.ro IpAddress .1.3.6.1.4.1.2011.6.110.14.1.3 |
hwIPoESmacSessionUserMacIPoE SMAC user MAC address.ro OCTET STRING .1.3.6.1.4.1.2011.6.110.14.1.4 |
hwIPoESmacVlanIDIPoE SMAC user VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.110.14.1.5 |