HUAWEI-IPDSLAM-MSTP-MIB
AI MIB Summary
The HUAWEI-IPDSLAM-MSTP-MIB module provides management objects for monitoring and configuring Multiple Spanning Tree Protocol (MSTP) instances, VLAN-to-instance mappings, and port states on Huawei IPDSLAM and MSTP network devices. It enables the tracking of loop prevention mechanisms and the verification of redundant path load-sharing configurations across specific VLANs to ensure network stability.
The mib is used for defining MIB objects of the multiple spanning tree protocol (MSTP). MSTP is an improvement of STP and RSTP. MSTP prevents the proliferation and infinite cycling of the packets in the loop network. In addition, MSTP provides multiple redundant paths for VLAN data transmission to achieve the load-sharing purpose. It supports MSTP loop network that helps meet various networking requirements.
Main OID:
hwMstp.1.3.6.1.4.1.2011.25.42.4
88
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
88 total| Object Name |
|---|
hwL2Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42 |
hwMstpThe mib is used for defining MIB objects of the multiple spanning tree protocol (MSTP).
MSTP is an improvement of STP and RSTP.
MSTP prevents the proliferation and infinite cycling of the packets in the loop network.
In addition, MSTP provides multiple redundant paths for VLAN data transmission to
achieve the load-sharing purpose.
It supports MSTP loop network that helps meet various networking requirements. MODULE-IDENTITY .1.3.6.1.4.1.2011.25.42.4 |
hwMstpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.1 |
hwMstpStatusIndicates the status of the MSTP function of a bridge.
Options:
1. enabled(1) -indicates the MSTP function of a bridge is enabled
2. disabled(2) -indicates the MSTP function of a bridge is disabled
Default: disabled(2)rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.25.42.4.1.1 |
hwMstpForceVersionIndicates the MSTP version of the current bridge.
Options:
1. stp(0) -indicates the MSTP version of the current bridge is stp
2. rstp(2) -indicates the MSTP version of the current bridge is rstp
3. mstp(3) -indicates the MSTP version of the current bridge is mstp
Default: mstp(3)
rstp(2) is not supported.rw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.2 |
hwMstpDiameterIndicates the diameter of the current bridged network.
Range: 2-7
Default: 7rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.3 |
hwMstpBridgeMaxHopsIndicates the maximum hop count of a region.
Range: 1-40
Default: 20rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.4 |
hwMstpMasterBridgeIDIndicates the master bridge ID of an IST in an MSTP region.
It is the root Bridge Identifier of the instance 0 in the region.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.5 |
hwMstpMasterPathCostIndicates the external path cost.
The value range of this leaf is relevant to hwMstpPathCostStandard.
Range: 1-65535 (The 802.1d-1998 protocol is used as the computing standard)
1-200000000 (The 802.1t protocol is used as the computing standard)
1-200000 (Huawei's proprietary legacy is used as the computing standard)ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.6 |
hwMstpBpduGuardIndicates whether a bridge is enabled with BPDU protection.
Options:
1. enabled(1) -indicates BPDU protection of the bridge is enabled
2. disabled(2) -indicates BPDU protection of the bridge is disabled
Default: disabled(2)rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.25.42.4.1.7 |
hwMstpAdminFormatSelectorIndicates the configuration ID format of a bridge.ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.8 |
hwMstpAdminRegionNameIndicates the MSTP region name. The region name consists of up to 32 characters,
and only letters (case sensitive), numerals, the hyphen (-), and the underline (_)
are allowed.rw OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.9 |
hwMstpAdminRevisionLevelIndicates the revision level of an MSTP region name.
Range: 0-65535
Default: 0rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.10 |
hwMstpOperFormatSelectorIndicates the configuration format of the region of a bridge in actual running.ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.11 |
hwMstpOperRegionNameIndicates the actually-used MSTP region name.ro OCTET STRING( SIZE .1.3.6.1.4.1.2011.25.42.4.1.12 |
hwMstpOperRevisionLevelIndicates the revision level of the actually-used MSTP region name.
Default: 0ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.13 |
hwMstpRegionConfActiveIndicates whether to activate the modified MSTP region configuration.
Options:
1. enable (1) -when you need to activate the modified MSTP region configuration, use this value to perform the set operation.
2. disable(2) -the modified MSTP region configuration cannot be set to disable. When you perform the get operation to query the configuration, this value will be returned.
This leaf supports only the set operation and it is recommended that you do not perform the get operation. If you perform the get operation, the value disable (2) will be returned.rw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.14 |
hwMstpDefaultVlanAlloSets the default mapping between VLANs and spanning trees.
Options:
1. enable(1) -indicates the default mapping between VLANs and spanning trees is enabled
2. unused(65535) -indicates the default mapping between VLANs and spanning trees is unusedrw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.15 |
hwMstpDefaultRegionNameSets the default region name.
Options:
1. reset(1) -indicates the default region name is used
2. unused(65535) -indicates the default region name is unusedrw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.16 |
hwMstpPathCostStandardIndicates the reference standard for path cost computation of a bridge.
Options:
1. dot1d1998(1) -indicates dot1d1998 is the reference standard for path cost computation of a bridge
2. dot1t(2) -indicates dot1t is the reference standard for path cost computation of a bridge
3. legacy(3) -indicates legacy is the reference standard for path cost computation of a bridge
Default: legacy(3)rw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.17 |
hwMstpVIDAllocationTableIndicates the mapping between VLANs and instances extended by MSTP.
The index of this table is hwMstpVID. SEQUENCE OF HwMstpVIDAllocationEntry .1.3.6.1.4.1.2011.25.42.4.1.18 |
hwMstpVIDAllocationEntryIndicates the mapping between VLANs and instances extended by MSTP.
The index of this entry is hwMstpVID. HwMstpVIDAllocationEntry .1.3.6.1.4.1.2011.25.42.4.1.18.1 |
hwMstpVIDIt is an index and indicates the VLAN ID.
Range: 1-4094 Integer32 .1.3.6.1.4.1.2011.25.42.4.1.18.1.1 |
hwMstpAdminMstIDIndicates the configured MSTP region ID. Currently, the system supports
only 17 instances, that is, instances 0-16.
Range: 0-48ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.18.1.2 |
hwMstpOperMstIDIndicates the MSTP region ID in actual running. Currently, the system
supports only 17 instances, that is, instances 0-16.
Range: 0-48ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.18.1.3 |
hwMstpInstanceTableIndicates the instances extended by MSTP.
The index of this table is hwMstpInstanceID. SEQUENCE OF HwMstpInstanceEntry .1.3.6.1.4.1.2011.25.42.4.1.19 |
hwMstpInstanceEntryIndicates the instances extended by MSTP.
The index of this entry is hwMstpInstanceID. HwMstpInstanceEntry .1.3.6.1.4.1.2011.25.42.4.1.19.1 |
hwMstpInstanceIDIt is an index and indicates the MSTI ID. Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.1 |
hwMstpiBridgeIDThe Bridge Identifier for the spanning tree instance identified by MSTID.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.19.1.2 |
hwMstpiBridgePriorityIndicates the primary priority of the CIST bridge, or priority of the bridge in others.
Range: 0-61440
Default: 32768
Step: 4096rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.3 |
hwMstpiDesignedRootIndicates the master bridge ID of an MSTI in the region.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.19.1.4 |
hwMstpiRootPathCostIndicates the cost of the path from the BPDU-transmitting bridge to the root bridge.ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.5 |
hwMstpiRootPortIndicates the root port of an MSTI in the region.ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.6 |
hwMstpiRootTypeIndicates the type of the bridge.
Options:
1. normal(0) -indicates the bridge is normal
2. secondary(1) -indicates the bridge is secondary
3. primary(2) -indicates the bridge is primary
Default: normal(0)rw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.19.1.7 |
hwMstpiRemainingHopsIndicates the remaining hops of an MSTI in the region.ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.8 |
hwMstpiAdminMappedVlanListLowUsed for setting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs.
For example, if the vlan 1 and vlan 2047 belongs to this instance,
the hwMstpiAdminMappedVlanListLow is # 40.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.rw OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.19.1.9 |
hwMstpiAdminMappedVlanListHighUsed for setting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs.
For example, if the vlan 2048 and vlan 4094 belongs to this instance,
the hwMstpiAdminMappedVlanListHigh is # 80.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.02.rw OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.19.1.10 |
hwMstpiOperMappedVlanListLowUsed for setting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs in
actual running.
For example, if the vlan 1 and vlan 2047 belongs to this instance,
the hwMstpiOperMappedVlanListLow is # 40.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.19.1.11 |
hwMstpiOperMappedVlanListHighUsed for setting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs in actual running.
For example, if the vlan 2048 and vlan 4094 belongs to this instance,
the hwMstpiOperMappedVlanListHigh is # 80.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.02.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.19.1.12 |
hwMstpiRowStatusIndicates the row status, which is the operation type of the table.
Only option createAndGo(4) supports the set operation.
In the query operation, the value of this leaf is always active(1).
To create an MSTI, optionally input leaves hwMstpiBridgePriority, hwMstpiRootType,
hwMstpiAdminMappedVlanListLow, and hwMstpiAdminMappedVlanListHigh, specify the value
of hwMstpiRowStatus to createAndGo(4), and perform the set operation.
To modify the values of other leaves, you can directly perform the set operation without
setting and issuing the row status.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates creating an MSTI
3. destroy(6) -indicates deleting an MSTIrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.25.42.4.1.19.1.13 |
hwMstpiBridgeSecondaryPriorityIndicates the secondary priority of the CIST bridge. Only used by CIST.
Range: 0-61440
Default: 61440
Step: 4096rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.14 |
hwMstpiBridgeSecondaryPriorityBindPortIndicates the port which bound secondary priority of the CIST bridge in the region. Only used by CIST.
Default: 0rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.15 |
hwMstpiBridgeCurrentPriorityIndicates the current priority of the bridge, including CIST and others.
Range: 0-61440ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.19.1.16 |
hwMstpPortTableIndicates the ports extended by MSTP.
The indexes of this table are hwMstpInstanceID and hwMstpiPortIndex. SEQUENCE OF HwMstpPortEntry .1.3.6.1.4.1.2011.25.42.4.1.20 |
hwMstpPortEntryIndicates the ports extended by MSTP.
The indexes of this entry are hwMstpInstanceID and hwMstpiPortIndex. HwMstpPortEntry .1.3.6.1.4.1.2011.25.42.4.1.20.1 |
hwMstpiPortIndexIt is an index and indicates a bridge port. Integer32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.1 |
hwMstpiPortStateIndicates the port status.
Options:
1. disabled(1) -indicates the port is down
2. discarding(2) -indicates the port is discarding. During this phase,
port can only receive and process BPDU data packet,
not forward traffic, root bridge, root port, and specified
port will be voted
3. learning(4) -indicates the port is learning. During this phase,
bridge will create MAC address table according the
received traffic, but not forward traffic
4. forwarding(5) -indicates traffic forwardro Enumeration .1.3.6.1.4.1.2011.25.42.4.1.20.1.2 |
hwMstpiPortPriorityIndicates the port priority.
Range: 0-240
Default: 128
Step: 16rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.3 |
hwMstpiPortPathCostIndicates the path cost of the port.
The value range of this leaf is relevant to hwMstpPathCostStandard.
Range: 1-65535 (The 802.1d-1998 protocol is used as the computing standard)
1-200000000 (The 802.1t protocol is used as the computing standard)
1-200000 (Huawei's proprietary legacy is used as the computing standard)rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.4 |
hwMstpiDesignatedRootThe Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.20.1.5 |
hwMstpiDesignatedCostIndicates the cost of the path from the port to the root bridge.ro Integer32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.6 |
hwMstpiDesignatedBridgeIndicates the designated bridge.
The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B).
For example, if the bridge priority is 32768, and the bridge MAC address is 00.EE.DC.F9.13.20,
then the bridge ID is 80.00.00.EE.DC.F9.13.20.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.20.1.7 |
hwMstpiDesignatedPortIndicates the designated port.
The format of the port ID is port priority (1B) + port number (1B).
For example, if the port priority is 128, and the port number is 1, then the port ID is 80.01.ro OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.20.1.8 |
hwMstpiStpPortEdgeportIndicates whether the current port is an edge port.
Options:
1. enabled(1) -indicates the current port is an edge port
2. disabled(2) -indicates the current port is not an edge port
Default: disabled(2)rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.25.42.4.1.20.1.9 |
hwMstpiStpPortPointToPointIndicates whether the current port is a point-to-point port.
Options:
1. forceTrue(1) -indicates the current port is a point-to-point port
2. forceFalse(2) -indicates the current port is not a point-to-point port
3. auto(3) -indicates the current port is a self-negotiation port
Default: auto(3)rw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.20.1.10 |
hwMstpiStpMcheckIndicates the mcheck parameter of the bridge port.
Options:
1. enable(1) -indicates the mcheck parameter of the bridge port is enabled
2. unused(65535) -indicates the mcheck parameter of the bridge port is unusedrw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.20.1.11 |
hwMstpiStpTransLimitIndicates the maximum number of BPDUs that can be transmitted within the hello time.
Range: 1-255
Default: 3rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.12 |
hwMstpiStpRXStpBPDUIndicates the number of BPDUs received by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.13 |
hwMstpiStpTXStpBPDUIndicates the number of BPDUs transmitted by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.14 |
hwMstpiStpRXTCNBPDUIndicates the number of TCN BPDUs received by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.15 |
hwMstpiStpTXTCNBPDUIndicates the number of TCN BPDUs transmitted by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.16 |
hwMstpiStpRXRSTPBPDUIndicates the number of RST BPDUs received by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.17 |
hwMstpiStpTXRSTPBPDUIndicates the number of RST BPDUs transmitted by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.18 |
hwMstpiStpRXMSTPBPDUIndicates the number of MST BPDUs received by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.19 |
hwMstpiStpTXMSTPBPDUIndicates the number of MST BPDUs transmitted by the port.ro Counter32 .1.3.6.1.4.1.2011.25.42.4.1.20.1.20 |
hwMstpiStpClearStatisticsIndicates whether to clear the statistics.
Options:
1. clear(1) -indicates the statistics is cleared
2. unused(65535) -indicates the statistics is not clearedrw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.20.1.21 |
hwMstpiStpDefaultPortCostIndicates whether to restore the default port cost.
Options:
1. reset(1) -indicates the default port cost is restored
2. unused(65535) -indicates the default port cost is not restoredrw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.20.1.22 |
hwMstpiStpStatusIndicates whether STP is enabled on the port.
Options:
1. enabled(1) -indicates STP is enabled on the port
2. disabled(2) -indicates STP is not enabled on the port
Default: enabled(1)rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.25.42.4.1.20.1.23 |
hwMstpiPortRootGuardIndicates whether root protection is enabled on the port.
Options:
1. enabled(1) -indicates root protection is enabled on the port
2. disabled(2) -indicates root protection is disabled on the port
Default: disabled(2)rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.25.42.4.1.20.1.24 |
hwMstpiPortLoopGuardIndicates whether loop protection is enabled on the port.
Options:
1. enabled(1) -indicates loop protection is enabled on the port
2. disabled(2) -indicates loop protection is disabled on the port
Default: disabled(2)rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.25.42.4.1.20.1.25 |
hwMstpiPortComplianceIndicates the MSTP compliance type of the current port.
Options:
1. auto(1) -indicates the MSTP compliance type of the current port is auto
2. dot1w(2) -indicates the MSTP compliance type of the current port is dot1w
Default: auto(1).rw Enumeration .1.3.6.1.4.1.2011.25.42.4.1.20.1.26 |
hwMstpTimeFactorIndicates the timeout factor of a bridge.
Range: 1-10
Default: 3rw Integer32 .1.3.6.1.4.1.2011.25.42.4.1.21 |
hwMstpMD5KEYIndicates the MD5 key used for generating the region configuration digest of the MSTP protocol.
Default: 0x13AC06A62E47FD51F95D2BA243CD0346rw OCTET STRING .1.3.6.1.4.1.2011.25.42.4.1.22 |
hwMstpTrapsDefinition point for Mstp notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.2 |
hwMstpCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.2.1 |
hwMstpCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.2.1.0 |
hwMstpiPortStateForwardingThe SNMP trap that is generated when a port turns into
forwarding state form other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.42.4.2.1.0.1 |
hwMstpiPortStateDiscardingThe SNMP trap that is generated when a port turns into
discarding state form forwarding state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.42.4.2.1.0.2 |
hwMstpiPortRootGuardedThe SNMP trap that is generated when a root-guard port
receives a superior message on the relevant instance. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.42.4.2.1.0.3 |
hwMstpiPortRootGuardedResumeThe SNMP trap that is generated when a root-guard port
not receives a superior message on the relevant instance. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.42.4.2.1.0.4 |
hwMstpiPortBpduGuardedThe SNMP trap that is generated when an edged port of
the BPDU-guard switch receives BPDU packets. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.42.4.2.1.0.5 |
hwMstpiPortBpduGuardedResumeThe SNMP trap that is generated when an edged port of
the BPDU-guard switch not receives BPDU packets. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.42.4.2.1.0.6 |
hwMstpiPortDisableThe SNMP trap that is generated when a port disable
stp. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.42.4.2.1.0.7 |
hwMstpAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.2.2 |
hwMstpAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.2.2.0 |
hwMstpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.3 |
hwMstpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.3.1 |
hwMstpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.42.4.3.2 |