HUAWEI-ETHOAM-MIB
AI MIB Summary
The HUAWEI-ETHOAM-MIB module enables the monitoring and management of Ethernet Operations, Administration, and Maintenance (OAM) sessions on Huawei network devices, specifically tracking fault detection states, continuity check parameters, and link status metrics defined in IEEE 802.1ag and ITU-T Y.1731 standards.
Ethernet OAM MIB
Main OID:
hwEthOamMib.1.3.6.1.4.1.2011.5.25.136.1
649
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
649 total| Object Name |
|---|
hwEthOam OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136 |
hwEthOamMibEthernet OAM MIB MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.136.1 |
hwEthOam1ag OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1 |
hwDot1agCfmEnabledThis object indicates whether CFM is enabled globally.
The value of this object can be:
Enabled: indicates that CFM is enabled globally.
Disabled: indicates that global CFM is disabledrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.1 |
hwDot1agCfmVersionThis object indicates the supported CFM version.
The value of this object can be:
draft: indicates IEEE 802.1ag Draft 7.
standard: indicates IEEE Standard 802.1ag-2007.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.2 |
hwDot1agCfmMdObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.3 |
hwDot1agCfmMdTableNextIndexThe index to the Maintenance Domain table.
hwDot1agCfmMdTableNextIndex needs to be inspected to find an
available index for row-creation.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.3.1 |
hwDot1agCfmMdTableThis table is used to create a Maintenance Domain (MD).
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance. SEQUENCE OF HwDot1agCfmMdEntry .1.3.6.1.4.1.2011.5.25.136.1.1.3.2 |
hwDot1agCfmMdEntryThe Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage. HwDot1agCfmMdEntry .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1 |
hwDot1agCfmMdIndexThis object indicates the index of the MD Table.
hwDot1agCfmMdTableNextIndex needs to be inspected to find an
available index for row-creation. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.1 |
hwDot1agCfmMdFormatThis object indicates the format of the MD name.
By default, the value is string.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.2 |
hwDot1agCfmMdNameThis object indicates the name of the MD.
The type/format of this object is determined by the value
of the hwDot1agCfmMdFormat object.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.3 |
hwDot1agCfmMdMdLevelThis object indicates the level of the MD.
The value ranges from 0 to 7. The greater the value, the higher the preference.
By default, the value is 0.rw HWDot1agCfmMDLevel .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.4 |
hwDot1agCfmMdMhfCreationThis object indicates whether the management entity can create MIPs for the MD.
The value of this object can be:
defMHFnone: indicates that the MIPs are not automatically created.
defMHFdefault: indicates that the management entity automatically
creates MIPs based on certain rules.
defMHFexplicit: indicates that the management entity automatically
creates MIPs based on certain rules.
By default, the value is defMHFnone.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.5 |
hwDot1agCfmMdMhfIdPermissionThis object indicates what is to be included in the Sender ID TLV
transmitted by MPs configured in the MD. The value of this object
can be:
sendIdNone: indicates that the Sender ID TLV is not to be sent.
sendIdChassis: indicates that the Sender ID TLV to be sent contains
the chassis ID information.
sendIdManage: indicates that the Sender ID TLV to be sent contains
management address information.
sendIdChassisManage: indicates that the Sender ID TLV to be sent
contains both chassis ID information and
management address information.
sendIdDefer: indicates that the contents of the Sender ID TLV to be
sent are determined by the MD management entity.
By default, the value is sendIdDefer.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.6 |
hwDot1agCfmMdFormatNameThis object indicates the MD format name.
The type/format of this object is determined by the value
of the hwDot1agCfmMdFormatName object.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.7 |
hwDot1agCfmMdRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.99 |
hwDot1agCfmMaObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.4 |
hwDot1agCfmMaNextIndexValue to be used as the index of the MA table entries.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.4.1 |
hwDot1agCfmMaTableThis table is used to create a Maintenance Association (MA).
Each row in the table represents an MA.
An MA is a set of MEPs, each configured with a single service instance. SEQUENCE OF HwDot1agCfmMaEntry .1.3.6.1.4.1.2011.5.25.136.1.1.4.2 |
hwDot1agCfmMaEntryThe MA table entry. HwDot1agCfmMaEntry .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1 |
hwDot1agCfmMaIndexThis object indicates the index of the MA table. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.1 |
hwDot1agCfmMaNameThis object indicates the name of the MA.
This name MUST be unique within a maintenance domain.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.2 |
hwDot1agCfmMaMapTypeThis object indicates what is associated with the MA.
The value of this object can be:
mapVlan: indicates that a VLAN is associated with the current MA.
mapVsi: indicates that a VSI is associated with the current MA.
mapL2vc: indicates that an L2VC is associated with the current MA.
unbind: indicates that the MA is not associated with any service instance.
mapCcc: indicates that a CCC is associated with the current MA.
By default, the value is unbind.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.3 |
hwDot1agCfmMaMapVlanValueThis object indicates the ID of the VLAN associated with the MA.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.4 |
hwDot1agCfmMaMapVsiNameThis object indicates the name of the VSI associated with the MA.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.5 |
hwDot1agCfmMaMapL2vcValueThis object indicates the ID of the L2VC associated with the MA.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.6 |
hwDot1agCfmMaMapL2vcTypeThis object indicates the encapsulation type of the L2VC associated with the MA.
The value of this object can be:
invalid: indicates that no display shows that the L2VC is associated
with the current MA.
l2vcRaw: indicates that the VLAN tag is not encapsulated into the packet.
l2vcTagged: indicates that the VLAN tag is encapsulated into the packet.
By default, the value is invalid.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.7 |
hwDot1agCfmMaPktPriorityThis object indicates the priority of the 802.1ag packet sent in the MA.
The value ranges from 0 to 7. The greater the value is, the higher the priority is.
By default, the value is 7.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.8 |
hwDot1agCfmMaCcmIntervalThis object indicates the interval for an MEP in the MA to send
or probe CCMs. The value of this object can be:
3.3 milliseconds
10 milliseconds
20 milliseconds
30 milliseconds
50 milliseconds
100 milliseconds
1 second
10 seconds
1 minute
10 minutes
By default, the value is 1 second.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.9 |
hwDot1agCfmMaRmepActiveTimeThis object indicates the time period after which RMEP configurations
are to be activated. The value ranges from 0 to 600 in seconds.
By default, the value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.10 |
hwDot1agCfmMaMepFngAlarmTimeThis object indicates the delay for the RMEP to send trap messages.
The value must be an integer multiple of 500, for example, 500, 1000,
or 1500.
The value ranges from 0 to 30000 in milliseconds.
By default, the value is 2500.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.11 |
hwDot1agCfmMaMepFngResetTimeThis object indicates the delay for the RMEP to send alarm clearance
messages after the fault is rectified.
The value must be an integer multiple of 500, for example, 500, 1000,
or 1500.
The value ranges from 0 to 30000 in milliseconds.
By default, the value is 10000.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.12 |
hwDot1agCfmMaFormatThis object indicates the format of the MA name.
string: indicates that the format of the MA name is string.
icc-based: indicates that the format of the MA name is ICC-based.
By default, the value is string.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.13 |
hwDot1agCfmMaFormatNameThis object indicates the MA format name.
The type/format of this object is determined by the value
of the hwDot1agCfmMaFormatName object.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.14 |
hwDot1agCfmMaMapCccNameThis object indicates the name of the CCC associated with the MA.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.15 |
hwDot1agCfmMaRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.99 |
hwDot1agCfmMepObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.5 |
hwDot1agCfmMepTableThis table is used to create a Maintenance Association End Point (MEP). SEQUENCE OF HwDot1agCfmMepEntry .1.3.6.1.4.1.2011.5.25.136.1.1.5.1 |
hwDot1agCfmMepEntryThe MEP table entry. HwDot1agCfmMepEntry .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1 |
hwDot1agCfmMepIdentifierThis object indicates the ID of the MEP.
Integer that is unique among all the MEPs in the same MA.
MEP Identifier is also known as the MEPID.
The value ranges from 1 to 8191.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.1 |
hwDot1agCfmMepIsVlanTypeThis object indicates whether the MEP in the MA is a VLAN-based MEP.
If the MEP is a VLAN-based MEP, the MA must have been associated
with a VLAN and the interface and VLAN information need not be configured.
If the MEP is not a VLAN-based MEP, entry creation fails.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.2 |
hwDot1agCfmMepIfIndexThis object indicates the interface to which the MEP is bound.
The interface is either a bridge port, or an aggregated IEEE 802.1
link within a bridge port, to which the MEP is attached.
By default, the value of IfIndex is 0.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.3 |
hwDot1agCfmMepDot1qVlanThis object indicates the VLAN to which the interface that the MEP
is bound to belong.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.4 |
hwDot1agCfmMepPeVlanThis object indicates the QinQ PE VLAN bound to the MEP.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.5 |
hwDot1agCfmMepCeVlanThis object indicates the QinQ CE VLAN bound to the MEP.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.6 |
hwDot1agCfmMepDirectionThis object indicates the direction in which the MEP sends the 802.1ag
protocol packets.
The value of this object can be:
invalid: indicates the invalid value.
dirInward: indicates that the 802.1ag protocol packets sent by an
inward-facing MEP are transmitted through all the interfaces
in the VLAN associated with the current MA (except the
interface where the MEP resides). That is, an inward-facing
MEP broadcasts the 802.1ag protocol packets in the VLAN
associated with the current MA.
dirOutward: indicates that the 802.1ag protocol packets sent by an
outward-facing MEP are transmitted directly through the
interface on which the MEP resides.
By default, the value is invalid.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.7 |
hwDot1agCfmMepCcmSendEnabledThis object indicates whether CCM sending is enabled on the MEP in an MA.
The value of this object can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.8 |
hwDot1agCfmMepMacAddressThis object indicates the MAC address of an MEP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.9 |
hwDot1agCfmMepRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.99 |
hwDot1agCfmRMepObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.6 |
hwDot1agCfmRMepTableThis table is used to create a Remote Maintenance Association End Point (RMEP). SEQUENCE OF HwDot1agCfmRMepEntry .1.3.6.1.4.1.2011.5.25.136.1.1.6.1 |
hwDot1agCfmRMepEntryThe remote MEP table entity. HwDot1agCfmRMepEntry .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1 |
hwDot1agCfmRMepIdentifierThis object indicates the ID of the RMEP.
The value ranges from 1 to 8191.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.1 |
hwDot1agCfmRMepMacAddressThis object indicates the MAC address of the interface
the RMEP resides.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.2 |
hwDot1agCfmRMepCcmRecvEnabledThis object indicates whether CCM receiving is enabled on the current device.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.3 |
hwDot1agCfmRMepStateIsUpThis object indicates the CFM status. The value can be:
up: indicates that the CFM status is Up.
down: indicates that the CFM status is Down.
invalid: indicates that the CFM status is not enabled.ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.4 |
hwDot1agCfmRMepHighestPrDefectThis object indicates the severity level of the fault on an RMEP.
If the CFM status is Up, this object is displayed as none.ro HWDot1agCfmHighestDefectPri .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.5 |
hwDot1agCfmRMepRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.99 |
hwDot1agCfmMipObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.7 |
hwDot1agCfmMipTableThis table is used to display information about a Maintenance
Association Intermediate Point (MIP). SEQUENCE OF HwDot1agCfmMipEntry .1.3.6.1.4.1.2011.5.25.136.1.1.7.1 |
hwDot1agCfmMipEntryThe MIP table entry. HwDot1agCfmMipEntry .1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1 |
hwDot1agCfmMipIfIndexThis object indicates the interface on which the MIP resides. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.1 |
hwDot1agCfmMipLevelThis object indicates the level of the MIP.
The value ranges from 0 to 7.ro HWDot1agCfmMDLevel .1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.2 |
hwDot1agCfmMipIfMacAddressThis object indicates the MAC address of the interface on which the MIP resides.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.3 |
hwDot1agCfmMacPingObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.8 |
hwDot1agCfmMacPingTableThe entries related to the Mac Ping include the parameters input
by users and the returned results. SEQUENCE OF HwDot1agCfmMacPingEntry .1.3.6.1.4.1.2011.5.25.136.1.1.8.1 |
hwDot1agCfmMacPingEntryThis table is used to configure the MAC ping function. HwDot1agCfmMacPingEntry .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1 |
hwDot1agCfmMacPingIndexThis object indicates the index of this table. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.1 |
hwDot1agCfmMacPingStateThis object indicates whether the MAC ping function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.2 |
hwDot1agCfmMacPingMdNameThis object indicates the name of the MD where MAC ping is performed.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.3 |
hwDot1agCfmMacPingMaNameThis object indicates the name of the MA where MAC ping is performed.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.4 |
hwDot1agCfmMacPingMepIdThis object indicates the ID of the local MEP of the 802.1ag MAC ping operation.
The value ranges from 1 to 8191.
By default, the value is 0.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.5 |
hwDot1agCfmMacPingDestIsMepIdThis object indicates whether the destination MAC address of the LBM
is the MAC address of the interface on which the RMEP resides.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.6 |
hwDot1agCfmMacPingDestMepIdThis object indicates the ID of the destination RMEP of the 802.1ag
MAC ping operation.
The value ranges from 1 to 8191.
By default, the value is 0.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.7 |
hwDot1agCfmMacPingMacAddressThis object indicates the destination MAC address of the LBM.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.8 |
hwDot1agCfmMacPingOutIfIndexThis object indicates the outbound interface that sends the LBM.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.9 |
hwDot1agCfmMacPingTimeOutThis object indicates the timeout period for waiting for the LBR.
The value ranges from 1 to 65535 in milliseconds.
By default, the value is 2000.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.10 |
hwDot1agCfmMacPingCountThis object indicates the number of ping operation times.
The value ranges from 1 to 4294967295.
By default, the value is 5.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.11 |
hwDot1agCfmMacPingPacketSizeThis object indicates the length of the LBM.
The value ranges from 64 to 9500.
By default, the value is 95.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.12 |
hwDot1agCfmMacPingPriorityThis object indicates the priority of the sent LBM packet.
The value ranges from 0 to 7 or can be 255. The value 255 is an invalid value.
If the value is set to 255, this value should be identical with the priority value of the MA which the MEP belongs to.
The greater the value is, the higher the priority is.rw Integer32 (0..7 | 255 ) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.13 |
hwDot1agCfmMacPingSendPacketNumThis object indicates the number of sent LBMs.ro Counter32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.14 |
hwDot1agCfmMacPingRecvPacketNumThis object indicates the number of received LBRs.ro Counter32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.15 |
hwDot1agCfmMacPingPacketLossRatioThis object indicates the frame loss ratio on the physical link.
The value ranges from 0 to 100.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.16 |
hwDot1agCfmMacPingRecvTimeDelayMinThis object indicates the minimum delay in receiving the LBM.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.17 |
hwDot1agCfmMacPingRecvTimeDelayMaxThis object indicates the maximum delay in receiving the LBM.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.18 |
hwDot1agCfmMacPingRecvTimeDelayAvgThis object indicates the average delay in receiving the LBM.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.19 |
hwDot1agCfmMacPingRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.99 |
hwDot1agCfmMacTraceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.9 |
hwDot1agCfmMacTraceTableThis table is used to configure the MAC trace function. SEQUENCE OF HwDot1agCfmMacTraceEntry .1.3.6.1.4.1.2011.5.25.136.1.1.9.1 |
hwDot1agCfmMacTraceEntryIndicates the MAC Trace table entry. HwDot1agCfmMacTraceEntry .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1 |
hwDot1agCfmMacTraceIndexThis object indicates the index of this table. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.1 |
hwDot1agCfmMacTraceStateThis object indicates whether the MAC trace function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.2 |
hwDot1agCfmMacTraceMdNameThis object indicates the name of the MD where MAC trace is performed.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.3 |
hwDot1agCfmMacTraceMaNameThis object indicates the name of the MA where MAC trace is performed.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.4 |
hwDot1agCfmMacTraceMepIdThis object indicates the ID of the local MEP of the 802.1ag
MAC trace operation.
The value ranges from 1 to 8191.
By default, the value is 0.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.5 |
hwDot1agCfmMacTraceDestIsMepIdThis object indicates whether the destination MAC address of the LTM
is the MAC address of the interface on which the RMEP resides.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.6 |
hwDot1agCfmMacTraceDestMepIdThis object indicates the ID of the destination RMEP of the 802.1ag
MAC trace operation.
The value ranges from 1 to 8191.
By default, the value is 0.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.7 |
hwDot1agCfmMacTraceMacAddressThis object indicates the destination MAC address of the LTM.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.8 |
hwDot1agCfmMacTraceOutIfIndexThis object indicates the outbound interface that sends the LTM.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.9 |
hwDot1agCfmMacTraceTimeOutThis object indicates the timeout period for waiting for the LTR.
The value ranges from 1 to 65535, in milliseconds.
By default, the value is 2000.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.10 |
hwDot1agCfmMacTraceTTLThis object indicates the TTL value of the 802.1ag MAC trace operation.
The value ranges from 1 to 255.
By default, the value is 64.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.11 |
hwDot1agCfmMacTraceSendSeqNumberThis object indicates the sequence number of the sent LTR.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.12 |
hwDot1agCfmMacTraceResultThis object indicates the result of the MAC trace operation.ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.13 |
hwDot1agCfmMacTraceRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.99 |
hwDot1agCfmMacTraceReplyTableThis table is used to display information about the LTR for responding
to the MAC trace operation. SEQUENCE OF HwDot1agCfmMacTraceReplyEntry .1.3.6.1.4.1.2011.5.25.136.1.1.9.2 |
hwDot1agCfmMacTraceReplyEntryThe Mac Trace result table entry. HwDot1agCfmMacTraceReplyEntry .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1 |
hwDot1agCfmMacTraceReplySeqNumberThis object indicates the index of this table.
The value is the sequence number of the LTR. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.1 |
hwDot1agCfmMacTraceReplyRecvOrderThis object indicates the index of this table.
The value is the sequence in which the MAC trace results are displayed. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.2 |
hwDot1agCfmMacTraceReplyTTLThis object indicates the TTL of the LTR.
The value ranges from 0 to 255.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.3 |
hwDot1agCfmMacTraceReplyForwardedThis object indicates whether the device that sends the LTR keeps on
forwarding LTMs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.4 |
hwDot1agCfmMacTraceReplyTerminalMepThis object indicates whether the LTR is sent by an MEP.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.5 |
hwDot1agCfmMacTraceReplyRelayActionThis object indicates the value of the Relay Action field in the LTR.ro HWDot1agCfmRelayActionFieldValue .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.6 |
hwDot1agCfmMacTraceReplyIngressActionThis object indicates the value of the Ingress Action field in the LTR.ro HWDot1agCfmIngressActionFieldValue .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.7 |
hwDot1agCfmMacTraceReplyIngressMacThis object indicates the physical MAC address carried in the ingress
MAC address field in the LTR.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.8 |
hwDot1agCfmMacTraceReplyIngressIfNameThis object indicates the name of the inbound interface of the LTR.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.9 |
hwDot1agCfmMacTraceReplyEgressActionThis object indicates the value of the Egress Action field in the LTR.ro HWDot1agCfmEgressActionFieldValue .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.10 |
hwDot1agCfmMacTraceReplyEgressMacThis object indicates the physical MAC address carried in the egress
MAC address field in the LTR.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.11 |
hwDot1agCfmMacTraceReplyEgressIfNameThis object indicates the name of the interface that forwards the LTR.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.12 |
hwDot1agCfmQueryObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.1.10 |
hwDot1agCfmQueryMdIndexTableThis table is used to get the index of the Maintenance Domain table. SEQUENCE OF HwDot1agCfmQueryMdIndexEntry .1.3.6.1.4.1.2011.5.25.136.1.1.10.1 |
hwDot1agCfmQueryMdIndexEntryThe Md Index table entry. HwDot1agCfmQueryMdIndexEntry .1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1 |
hwDot1agCfmQueryMdNameThis object indicates the name of the Maintenance Domain. OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.1 |
hwDot1agCfmQueryMdIndexThis object indicates the index to the Maintenance Domain table.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.2 |
hwDot1agCfmQueryMaIndexTableThis table is used to get the index of the Maintenance Association table. SEQUENCE OF HwDot1agCfmQueryMaIndexEntry .1.3.6.1.4.1.2011.5.25.136.1.1.10.2 |
hwDot1agCfmQueryMaIndexEntryThe Ma Index table entry. HwDot1agCfmQueryMaIndexEntry .1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1 |
hwDot1agCfmQueryMaNameThis object indicates the name of Maintenance Association. OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.1 |
hwDot1agCfmQueryMaIndexThis object indicates the index to the Maintenance Association table.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.2 |
hwDot1agCfmMPAddressModelThis object indicates the MP address model of the CFM.
The value of this object can be:
bridge: indicates bridge MAC MP address model.
individual: indicates individual MP address model.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.1.101 |
hwEthOam3ah OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.2 |
hwDot3ahEfmEnabledEnable the EFM globally.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.2.1 |
hwDot3ahEfmObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.2.2 |
hwDot3ahEfmDetectModeTableSet the detection mode table in the last one kilometer on the interface. SEQUENCE OF HwDot3ahEfmDetectModeEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.1 |
hwDot3ahEfmDetectModeEntrySet the detection mode entity in the last one kilometer on the interface. HwDot3ahEfmDetectModeEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1 |
hwDot3ahEfmDetectModeDetection mode ( fast detection and standard detection)rw HWDetectType .1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.11 |
hwDot3ahEfmDetectIntervalTime interval of detectionrw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.12 |
hwDot3ahEfmDetectMalfunctionFailure description from 802.3ah and from associated modules.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.13 |
hwDot3ahEfmTableThis table contains the primary controls and status for the
OAM capabilities of an Ethernet like interface. There will be
one row in this table for each Ethernet like interface in the
system that supports the OAM functions defined in [802.3ah]. SEQUENCE OF HwDot3ahEfmEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.2 |
hwDot3ahEfmEntryAn entry in the table, containing information on the Ethernet
OAM function for a single Ethernet like interface. Entries in
the table are created automatically for each interface
supporting Ethernet OAM. The status of the row entry can be
determined from hwDot3ahEfmOperStatus.
A hwDot3ahEfmEntry is indexed in the hwDot3ahEfmTable by the ifIndex
object of the Interfaces MIB. HwDot3ahEfmEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1 |
hwDot3ahEfmAdminStateThis object is used to provision the default administrative
OAM mode for this interface. This object represents the
desired state of OAM for this interface.
The hwDot3ahEfmAdminState always starts in the disabled(2) state
until an explicit management action or configuration
information retained by the system causes a transition to the
enabled(1) state. When enabled(1), Ethernet OAM will attempt
to operate over this interface.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.1 |
hwDot3ahEfmOperStatusAt initialization and failure conditions, two OAM entities on
the same full-duplex Ethernet link begin a discovery phase to
determine what OAM capabilities may be used on that link.ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.2 |
hwDot3ahEfmModeThis object configures the mode of OAM operation for this
Ethernet like interface. OAM on Ethernet interfaces may be in
'active' mode or 'passive' mode.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.3 |
hwDot3ahEfmMaxOamPduSizeThe largest OAMPDU that the OAM entity supports. OAM
entities exchange maximum OAMPDU sizes and negotiate to use
the smaller of the two maximum OAMPDU sizes between the peers.
This value is determined by the local implementation.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.4 |
hwDot3ahEfmConfigRevisionThe configuration revision of the OAM entity as reflected in
the latest OAMPDU sent by the OAM entity. The config revision
is used by OAM entities to indicate configuration changes have
occurred which might require the peer OAM entity to
re-evaluate whether OAM peering is allowed.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.5 |
hwDot3ahEfmFunctionsSupportedThe OAM functions supported on this Ethernet like interface.
OAM consists of separate functional sets beyond the basic
discovery process which is always required. These functional
groups can be supported independently by any implementation.
These values are communicated to the peer via the local
configuration field of Information OAMPDUs.
Setting 'unidirectionalSupport(0)' indicates that the OAM
entity supports the transmission of OAMPDUs on links that are
operating in unidirectional mode (traffic flowing in one
direction only). Setting 'loopbackSupport(1)' indicates the
OAM entity can initiate and respond to loopback commands.
Setting 'eventSupport(2)' indicates the OAM entity can send
and receive Event Notification OAMPDUs. Setting
'variableSupport(3)' indicates the OAM entity can send and
receive Variable Request and Response OAMPDUs.ro Bits .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.6 |
hwDot3ahEfmTimeoutThe EFM Timeout object defines the max time that the EFM session
stays in detect mode since the last OAMPDU received. if there's
no OAMPDU received within the time the timeout value defines, the
EFM session will turn into discovery state.
The value of EFM Timeout should be three or more times the value of
the sending interval of the peer interface.
The timeout value must be an exact integral multiple of 100.
Range: 300-30000
Default: 5000
Unit: millisecondsrw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.7 |
hwDot3ahEfmIntervalThe EFM interval object defines the interval of sending OAM PDUs.
The value of EFM interval should be the same as the value of
the peer interface.
The interval value must be an exact integral multiple of 100.
Range: 100-1000
Default: 1000
Unit: millisecondsrw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.8 |
hwDot3ahEfmPeerTableThis table contains information about the OAM peer for a
particular Ethernet like interface. OAM entities communicate
with a single OAM peer entity on Ethernet links on which OAM
is enabled and operating properly. There is one entry in this
table for each entry in the hwDot3ahEfmTable for which information
on the peer OAM entity is available. SEQUENCE OF HwDot3ahEfmPeerEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.3 |
hwDot3ahEfmPeerEntryAn entry in the table, containing information on the peer OAM
entity for a single Ethernet like interface.
Note that there is at most one OAM peer for each Ethernet like
interface. Entries are automatically created when information
about the OAM peer entity becomes available, and automatically
deleted when the OAM peer entity is no longer in
communication. Peer information is not available when
hwDot3ahEfmOperStatus is disabled(1), linkFault(2),
passiveWait(3), activeSendLocal(4). or nonOperHalfDuplex(10)). HwDot3ahEfmPeerEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1 |
hwDot3ahEfmPeerMacAddressThe MAC address of the peer OAM entity. The MAC address is
derived from the most recently received OAMPDU.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.1 |
hwDot3ahEfmPeerVendorOuiThe OUI of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV. The
OUI can be used to identify the vendor of the remote OAM
entity. This value is initialized to zero before any Local
Information TLV is received.ro HWDot3Oui .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.2 |
hwDot3ahEfmPeerVendorInfoThe Vendor Info of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV. The
vendor information field is within the Local Information TLV,
and can be used to determine additional information about the
peer entity. The format of the vendor information is
unspecified within the 32-bit field. This value is
initialized to zero before any Local Information TLV is
received.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.3 |
hwDot3ahEfmPeerModeThe mode of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV. The
mode of the peer can be determined from the Configuration
field in the Local Information TLV of the last Information
OAMPDU received from the peer. The value is unknown(3)
whenever no Local Information TLV has been received. The
values of active(1) and passive(2) are returned when a Local
Information TLV has been received indicating the peer is in
active or passive mode, respectively.ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.4 |
hwDot3ahEfmPeerMaxOamPduSizeThe maximum size of OAMPDU supported by the peer as reflected
in the latest Information OAMPDU received with a Local
Information TLV. Ethernet OAM on this interface must not use
OAMPDUs that exceed this size. The maximum OAMPDU size can be
determined from the PDU Configuration field of the Local
Information TLV of the last Information OAMPDU received from
the peer. A value of zero is returned if no Local Information
TLV has been received. Otherwise, the value of the OAM peer's
maximum OAMPDU size is returned in this value.
Note that the values 1..65534 are invalid sizes for Ethernet
frames and should never appear.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.5 |
hwDot3ahEfmPeerConfigRevisionThe configuration revision of the OAM peer as reflected in
the latest OAMPDU. This attribute is changed by the peer
whenever it has a local configuration change for Ethernet OAM
this interface. The configuration revision can be determined
from the Revision field of the Local Information TLV of the
most recently received Information OAMPDU with a Local
Information TLV. A value of zero is returned if no Local
Information TLV has been received.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.6 |
hwDot3ahEfmPeerFunctionsSupportedThe OAM functions supported on this Ethernet like interface.
OAM consists of separate functionality sets above the basic
discovery process. This value indicates the capabilities of
the peer OAM entity with respect to these functions. This
value is initialized so all bits are clear.
If unidirectionalSupport(0) is set, then the peer OAM entity
supports sending OAM frames on Ethernet interfaces when the
receive path is known to be inoperable. If
loopbackSupport(1) is set, then the peer OAM entity can send
and receive OAM loopback commands. If eventSupport(2) is set,
then the peer OAM entity can send and receive event OAMPDUs to
signal various error conditions. If variableSupport(3) is set,
then the peer OAM entity can send and receive variable
requests to monitor attribute value as described in Clause 57
of [802.3ah].
The capabilities of the OAM peer can be determined from the
configuration field of the Local Information TLV of the most
recently received Information OAMPDU with a Local Information
TLV. All zeros are returned if no Local Information TLV has
yet been received.ro Bits .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7 |
hwDot3ahEfmLoopbackTableThis table contains controls for the loopback state of the
local link as well as indicating the status of the loopback
function. There is one entry in this table for each entry in
hwDot3ahEfmTable that supports loopback functionality (where
hwDot3ahEfmFunctionsSupported includes the loopbackSupport bit
set).
Loopback can be used to place the remote OAM entity in a state
where every received frame (except OAMPDUs) is echoed back
over the same interface on which they were received. In this
state, at the remote entity, 'normal' traffic is disabled as
only the looped back frames are transmitted on the interface.
Loopback is thus an intrusive operation that prohibits normal
data flow and should be used accordingly. SEQUENCE OF HwDot3ahEfmLoopbackEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.4 |
hwDot3ahEfmLoopbackEntryAn entry in the table, containing information on the loopback
status for a single Ethernet like interface. Entries in the
table are automatically created whenever the local OAM entity
supports loopback capabilities. The loopback status on the
interface can be determined from the hwDot3ahEfmLoopbackStatus
object. HwDot3ahEfmLoopbackEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1 |
hwDot3ahEfmLoopbackStatusThe loopback status of the OAM entity. When
operating in normal mode with no loopback in progress, the
status reads noLoopback(1).
The values initiatingLooopback(2) and terminatingLoopback(4)
can be read or written. The other values can only be read -
they can never be written.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.1 |
hwDot3ahEfmLoopbackIgnoreRxSince OAM loopback is a disruptive operation (user traffic
does not pass), this attribute provides a mechanism to provide
controls over whether received OAM loopback commands are
processed or ignored. When the value is ignore(1), received
loopback commands are ignored. When the value is process(2),
OAM loopback commands are processed. The default value is to
process loopback commands (process(2)).rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.2 |
hwDot3ahEfmLoopbackTimeoutThis object specifies the timeout period for a remote loopback. The
value ranges from 0 to 1000 in minutes. The default value is 20
minutes. 0 indicates that no timeout period is set.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.3 |
hwDot3ahEfmStatsTableThis table contains statistics for the OAM function on a
particular Ethernet like interface. There is an entry in the
table for every entry in the hwDot3ahEfmTable.
The counters in this table are defined as 32-bit entries to
match the counter size as defined in [802.3ah]. Given the OAM
protocol is a slow protocol, the counters increment at a slow
rate. SEQUENCE OF HwDot3ahEfmStatsEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.5 |
hwDot3ahEfmStatsEntryAn entry in the table, containing statistics information on
the Ethernet OAM function for a single Ethernet like
interface. Entries are automatically created for every entry
in the hwDot3ahEfmTable. Counters are maintained across
transitions in hwDot3ahEfmOperStatus. HwDot3ahEfmStatsEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1 |
hwDot3ahEfmInformationTxA count of the number of Information OAMPDUs transmitted on
this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.1 |
hwDot3ahEfmInformationRxA count of the number of Information OAMPDUs received on this
interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.2 |
hwDot3ahEfmUniqueEventNotificationTxA count of the number of unique Event OAMPDUs transmitted on
this interface. Event notifications may be sent in duplicate
to increase the probability of successfully being received,
given the possibility that a frame may be lost in transit.
Duplicate Event Notification transmissions are counted by
hwDot3ahEfmDuplicateEventNotificationTx.
A unique Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
distinct from the previously transmitted Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.3 |
hwDot3ahEfmUniqueEventNotificationRxA count of the number of unique Event OAMPDUs received on
this interface. Event notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit. Duplicate Event Notification receptions are counted
by hwDot3ahEfmDuplicateEventNotificationRx.
A unique Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
distinct from the previously received Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.4 |
hwDot3ahEfmDuplicateEventNotificationTxA count of the number of duplicate Event OAMPDUs transmitted
on this interface. Event notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit.
A duplicate Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
identical to the previously transmitted Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.5 |
hwDot3ahEfmDuplicateEventNotificationRxA count of the number of duplicate Event OAMPDUs received on
this interface. Event notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit.
A duplicate Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
identical to the previously received Event Notification OAMPDU
Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.6 |
hwDot3ahEfmLoopbackControlTxA count of the number of Loopback Control OAMPDUs transmitted
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.7 |
hwDot3ahEfmLoopbackControlRxA count of the number of Loopback Control OAMPDUs received
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.8 |
hwDot3ahEfmVariableRequestTxA count of the number of Variable Request OAMPDUs transmitted
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.9 |
hwDot3ahEfmVariableRequestRxA count of the number of Variable Request OAMPDUs received on
this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.10 |
hwDot3ahEfmVariableResponseTxA count of the number of Variable Response OAMPDUs
transmitted on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.11 |
hwDot3ahEfmVariableResponseRxA count of the number of Variable Response OAMPDUs received
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.12 |
hwDot3ahEfmOrgSpecificTxA count of the number of Organization Specific OAMPDUs
transmitted on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.13 |
hwDot3ahEfmOrgSpecificRxA count of the number of Organization Specific OAMPDUs
received on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.14 |
hwDot3ahEfmUnsupportedCodesTxA count of the number of OAMPDUs transmitted on this
interface with an unsupported op-code.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.15 |
hwDot3ahEfmUnsupportedCodesRxA count of the number of OAMPDUs received on this interface
with an unsupported op-code.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.16 |
hwDot3ahEfmFramesLostDueToOamA count of the number of frames that were dropped by the OAM
multiplexer. Since the OAM multiplexer has multiple inputs
and a single output, there may be cases where frames are
dropped due to transmit resource contention. This counter is
incremented whenever a frame is dropped by the OAM layer.
Note that any Ethernet frame, not just OAMPDUs, may be dropped
by the OAM layer. This can occur when an OAMPDU takes
precedence over a 'normal' frame resulting in the 'normal'
frame being dropped.
When this counter is incremented, no other counters in this
MIB are incremented.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.17 |
hwDot3ahEfmEventConfigTableEthernet OAM includes the ability to generate and receive
Event Notification OAMPDUs to indicate various link problems.
This table contains the mechanisms to enable Event
Notifications and configure the thresholds to generate the
standard Ethernet OAM events. There is one entry in the table
for every entry in hwDot3ahEfmTable that supports OAM events
(where hwDot3ahEfmFunctionsSupported includes the eventSupport
bit set). The values in the table are maintained across
changes to hwDot3ahEfmOperStatus.
The standard threshold crossing events are:
- Errored Symbol Period Event. Generated when the number of
symbol errors exceeds a threshold within a given window
defined by a number of symbols (for example, 1,000 symbols
out of 1,000,000 had errors).
- Errored Frame Period Event. Generated when the number of
frame errors exceeds a threshold within a given window
defined by a number of frames (for example, 10 frames out
of 1000 had errors).
- Errored Frame Event. Generated when the number of frame
errors exceeds a threshold within a given window defined
by a period of time (for example, 10 frames in 1 second
had errors).
- Errored Frame Seconds Summary Event. Generated when the
number of errored frame seconds exceeds a threshold within
a given time period (for example, 10 errored frame seconds
within the last 100 seconds). An errored frame second is
defined as a 1 second interval which had >0 frame errors.
There are other events (dying gasp, critical events) that are
not threshold crossing events but which can be
enabled/disabled via this table. SEQUENCE OF HwDot3ahEfmEventConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.6 |
hwDot3ahEfmEventConfigEntryEntries are automatically created and deleted from this
table, and exist whenever the OAM entity supports Ethernet OAM
events (as indicated by the eventSupport bit in
hwDot3ahEfmFunctionsSuppported). Values in the table are
maintained across changes to the value of hwDot3ahEfmOperStatus.
Event configuration controls when the local management entity
sends Event Notification OAMPDUs to its OAM peer, and when
certain event flags are set or cleared in OAMPDUs. HwDot3ahEfmEventConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1 |
hwDot3ahEfmErrSymPeriodWindowHiThe two objects hwDot3ahEfmErrSymPeriodWindowHi and
hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit
integer representing the number of symbols over which this
threshold event is defined. This is defined as
hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi)
+ hwDot3ahEfmErrSymPeriodWindowLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodWindow is the number
of symbols in one second for the underlying physical layer.rw Unsigned32 UNITS "2^32 symbols" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.1 |
hwDot3ahEfmErrSymPeriodWindowLoThe two objects hwDot3ahEfmErrSymPeriodWindowHi and
hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit
integer representing the number of symbols over which this
threshold event is defined. This is defined as
hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi)
+ hwDot3ahEfmErrSymPeriodWindowLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodWindow is the number
of symbols in one second for the underlying physical layer.rw Unsigned32 UNITS "symbols" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.2 |
hwDot3ahEfmErrSymPeriodThresholdHiThe two objects hwDot3ahEfmErrSymPeriodThresholdHi and
hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned
64-bit integer representing the number of symbol errors that
must occur within a given window to cause this event.
This is defined as
hwDot3ahEfmErrSymPeriodThreshold =
((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi)
+ hwDot3ahEfmErrSymPeriodThresholdLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodThreshold is one
symbol errors. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.rw Unsigned32 UNITS "2^32 symbols" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.3 |
hwDot3ahEfmErrSymPeriodThresholdLoThe two objects hwDot3ahEfmErrSymPeriodThresholdHi and
hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned
64-bit integer representing the number of symbol errors that
must occur within a given window to cause this event.
This is defined as
hwDot3ahEfmErrSymPeriodThreshold =
((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi)
+ hwDot3ahEfmErrSymPeriodThresholdLo
If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a
window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event
Notification OAMPDU should be generated with an Errored Symbol
Period Event TLV indicating the threshold has been crossed in
this window.
The default value for hwDot3ahEfmErrSymPeriodThreshold is one
symbol error. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.rw Unsigned32 UNITS "symbols" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.4 |
hwDot3ahEfmErrSymPeriodEvNotifEnableIf true, the OAM entity should send an Event Notification
OAMPDU when an Errored Symbol Period Event occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.5 |
hwDot3ahEfmErrFramePeriodWindowThe number of frames over which the threshold is defined.
The default value of the window is the number of minimum size
Ethernet frames that can be received over the physical layer
in one second.
If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a
window of hwDot3ahEfmErrFramePeriodWindow frames, an Event
Notification OAMPDU should be generated with an Errored Frame
Period Event TLV indicating the threshold has been crossed in
this window.rw Unsigned32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.6 |
hwDot3ahEfmErrFramePeriodThresholdThe number of frame errors that must occur for this event to
be triggered. The default value is one frame error. If the
threshold value is zero, then an Event Notification OAMPDU is
sent periodically (at the end of every window). This can be
used as an asynchronous notification to the peer OAM entity of
the statistics related to this threshold crossing alarm.
If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a
window of hwDot3ahEfmErrFramePeriodWindow frames, an Event
Notification OAMPDU should be generated with an Errored Frame
Period Event TLV indicating the threshold has been crossed in
this window.rw Unsigned32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.7 |
hwDot3ahEfmErrFramePeriodEvNotifEnableIf true, the OAM entity should send an Event Notification
OAMPDU when an Errored Frame Period Event occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.8 |
hwDot3ahEfmErrFrameWindowThe amount of time (in 100ms increments) over which the
threshold is defined. The default value is 10 (1 second).
If hwDot3ahEfmErrFrameThreshold frame errors occur within a window
of hwDot3ahEfmErrFrameWindow seconds (measured in tenths of
seconds), an Event Notification OAMPDU should be generated
with an Errored Frame Event TLV indicating the threshold has
been crossed in this window.rw Unsigned32 UNITS "tenths of a second" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.9 |
hwDot3ahEfmErrFrameThresholdThe number of frame errors that must occur for this event to
be triggered. The default value is one frame error. If the
threshold value is zero, then an Event Notification OAMPDU is
sent periodically (at the end of every window). This can be
used as an asynchronous notification to the peer OAM entity of
the statistics related to this threshold crossing alarm.
If hwDot3ahEfmErrFrameThreshold frame errors occur within a window
of hwDot3ahEfmErrFrameWindow (in tenths of seconds), an Event
Notification OAMPDU should be generated with an Errored Frame
Event TLV indicating the threshold has been crossed in this
window.rw Unsigned32 UNITS "frames" .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.10 |
hwDot3ahEfmErrFrameEvNotifEnableIf true, the OAM entity should send an Event Notification
OAMPDU when an Errored Frame Event occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.11 |
hwDot3ahEfmErrFrameSecsSummaryWindowThe amount of time (in 100ms intervals) over which the
threshold is defined. The default value is 600 (60 seconds).
If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur
within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths
of seconds), an Event Notification OAMPDU should be generated
with an Errored Frame Seconds Summary Event TLV indicating the
threshold has been crossed in this window.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.12 |
hwDot3ahEfmErrFrameSecsSummaryThresholdThe number of errored frame seconds that must occur for this
event to be triggered. The default value is one errored frame
second. If the threshold value is zero, then an Event
Notification OAMPDU is sent periodically (at the end of every
window). This can be used as an asynchronous notification to
the peer OAM entity of the statistics related to this
threshold crossing alarm.
If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur
within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths
of seconds), an Event Notification OAMPDU should be generated
with an Errored Frame Seconds Summary Event TLV indicating the
threshold has been crossed in this window.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.13 |
hwDot3ahEfmErrFrameSecsEvNotifEnableIf true, the local OAM entity should send an Event
Notification OAMPDU when an Errored Frame Seconds Event
occurs.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.14 |
hwDot3ahEfmDyingGaspEnableIf true, the local OAM entity should attempt to indicate a
dying gasp via the OAMPDU flags field to its peer OAM entity
when a dying gasp event occurs. The exact definition of a
dying gasp event is implementation dependent. If the system
does not support dying gasp capability, setting this object
has no effect, and reading the object should always result in
'false'.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.15 |
hwDot3ahEfmCriticalEventEnableIf true, the local OAM entity should attempt to indicate a
critical event via the OAMPDU flags to its peer OAM entity
when a critical event occurs. The exact definition of a
critical event is implementation dependent. If the system
does not support critical event capability, setting this
object has no effect, and reading the object should always
result in 'false'.
By default, this object should have the value true for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
hwDot3ahEfmFunctionsSupported attribute), this value is ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.16 |
hwDot3ahEfmThresholdTriggerErrDownThis object indicates whether threshold event will trigger error-shutdown.
If it is enabled(1), after EFM checks that the threshold event happens,
the current interface will be set to administrative down.
The default value is disabled(2).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.17 |
hwDot3ahEfmEventLogTableThis table records a history of the events that have occurred
at the Ethernet OAM level. These events can include locally
detected events, which may result in locally generated
OAMPDUs, and remotely detected events, which are detected by
the OAM peer entity and signaled to the local entity via
Ethernet OAM. Ethernet OAM events can be signaled by Event
Notification OAMPDUs or by the flags field in any OAMPDU.
This table contains both threshold crossing events and
non-threshold crossing events. The parameters for the
threshold window, threshold value, and actual value
(hwDot3ahEfmEventLogWindowXX, hwDot3ahEfmEventLogThresholdXX,
hwDot3ahEfmEventLogValue) are only applicable to threshold
crossing events, and are returned as all F's (2^32 - 1) for
non-threshold crossing events.
Entries in the table are automatically created when such
events are detected. The size of the table is implementation
dependent. When the table reaches its maximum size, older
entries are automatically deleted to make room for newer
entries. SEQUENCE OF HwDot3ahEfmEventLogEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.7 |
hwDot3ahEfmEventLogEntryAn entry in the hwDot3ahEfmEventLogTable. Entries are
automatically created whenever Ethernet OAM events occur at
the local OAM entity, and when Event Notification OAMPDUs are
received at the local OAM entity (indicating events have
occurred at the peer OAM entity). The size of the table is
implementation dependent, but when the table becomes full,
older events are automatically deleted to make room for newer
events. The table index hwDot3ahEfmEventLogIndex increments for
each new entry, and when the maximum value is reached the
value restarts at zero. HwDot3ahEfmEventLogEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1 |
hwDot3ahEfmEventLogIndexAn arbitrary integer for identifying individual events
within the event log. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.1 |
hwDot3ahEfmEventLogTimestampThe value of sysUpTime at the time of the logged event. For
locally generated events, the time of the event can be
accurately retrieved from sysUpTime. For remotely generated
events, the time of the event is indicated by the reception of
the Event Notification OAMPDU indicating the event occurred on
the peer. A system may attempt to adjust the timestamp value
to more accurately reflect the time of the event at the peer
OAM entity by using other information, such as that found in
the timestamp found of the Event Notification TLVs, which
provides an indication of the relative time between events at
the peer entity.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.2 |
hwDot3ahEfmEventLogOuiThe OUI of the entity defining the object type. All IEEE
802.3 defined events (as appearing in [802.3ah] except for the
Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of
0x0180C2. Organizations defining their own Event Notification
TLVs include their OUI in the Event Notification TLV which
gets reflected here.ro HWDot3Oui .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.3 |
hwDot3ahEfmEventLogTypeThe type of event that generated this entry in the event log.
When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following
event types are defined:
erroredSymbolEvent(1),
erroredFrameEvent(2),
erroredFramePeriodEvent(3),
erroredFrameSecondsEvent(4),
lostlink(254),
linkFault(256),
dyingGaspEvent(257),
criticalLinkEvent(258)
The first four are considered threshold crossing events as
they are generated when a metric exceeds a given value within
a specified window. The other three are not threshold
crossing events.
When the OUI is not 71874 (0x0180C2 in hex), then some other
organization has defined the event space. If event subtyping
is known to the implementation, it may be reflected here.
Otherwise, this value should return all Fs (2^32 - 1).ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.4 |
hwDot3ahEfmEventLogLocationWhether this event occurred locally (local(1)), or was
received from the OAM peer via Ethernet OAM (remote(2)).ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.5 |
hwDot3ahEfmEventLogWindowHiIf the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an
unsigned 64-bit integer yielding the window over which the
value was measured for the threshold crossing event (for
example, 5, when 11 occurrences happened in 5 seconds while
the threshold was 10). The two objects are combined as:
hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi)
+ hwDot3ahEfmEventLogWindowLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.6 |
hwDot3ahEfmEventLogWindowLoIf the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an
unsigned 64-bit integer yielding the window over which the
value was measured for the threshold crossing event (for
example, 5, when 11 occurrences happened in 5 seconds while
the threshold was 10). The two objects are combined as:
hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi)
+ hwDot3ahEfmEventLogWindowLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.7 |
hwDot3ahEfmEventLogThresholdHiIf the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo
form an unsigned 64-bit integer yielding the value that was
crossed for the threshold crossing event (for example, 10,
when 11 occurrences happened in 5 seconds while the threshold
was 10). The two objects are combined as:
hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi)
+ hwDot3ahEfmEventLogThresholdLo
Otherwise, this value is returned as all F's (2^32 -1) and
adds no useful information.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.8 |
hwDot3ahEfmEventLogThresholdLoIf the event represents a threshold crossing event, the two
objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo
form an unsigned 64-bit integer yielding the value that was
crossed for the threshold crossing event (for example, 10,
when 11 occurrences happened in 5 seconds while the threshold
was 10). The two objects are combined as:
hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi)
+ hwDot3ahEfmEventLogThresholdLo
Otherwise, this value is returned as all F's (2^32 - 1) and
adds no useful information.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.9 |
hwDot3ahEfmEventLogValueIf the event represents a threshold crossing event, this
value indicates the value of the parameter within the given
window that generated this event (for example, 11, when 11
occurrences happened in 5 seconds while the threshold was 10).
Otherwise, this value is returned as all F's
(2^64 - 1) and adds no useful information.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.10 |
hwDot3ahEfmEventLogRunningTotalEach Event Notification TLV contains a running total of the
number of times an event has occurred, as well as the number
of times an Event Notification for the event has been
transmitted. For non-threshold crossing events, the number of
events (hwDot3ahEfmLogRunningTotal) and the number of resultant
Event Notifications (hwDot3ahEfmLogEventTotal) should be
identical.
For threshold crossing events, since multiple occurrences may
be required to cross the threshold, these values are likely
different. This value represents the total number of times
this event has happened since the last reset (for example,
3253, when 3253 symbol errors have occurred since the last
reset, which has resulted in 51 symbol error threshold
crossing events since the last reset).ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.11 |
hwDot3ahEfmEventLogEventTotalEach Event Notification TLV contains a running total of the
number of times an event has occurred, as well as the number
of times an Event Notification for the event has been
transmitted. For non-threshold crossing events, the number of
events (hwDot3ahEfmLogRunningTotal) and the number of resultant
Event Notifications (hwDot3ahEfmLogEventTotal) should be
identical.
For threshold crossing events, since multiple occurrences may
be required to cross the threshold, these values are likely
different. This value represents the total number of times
one or more of these occurrences have resulted in an Event
Notification (for example, 51 when 3253 symbol errors have
occurred since the last reset, which has resulted in 51 symbol
error threshold crossing events since the last reset).ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.12 |
hwDot3ahEfmManagerTableThis table contains configurations of binding relationships
between EFM and other modules. SEQUENCE OF HwDot3ahEfmManagerEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.8 |
hwDot3ahEfmManagerEntryThis entry contains configurations of binding relationships
between EFM and other modules. HwDot3ahEfmManagerEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1 |
hwDot3ahEfmTriggerIfDownThis object indicates whether EFM is bound to the interface.
If it is enabled(1), after EFM checks that the link times out,
the current Ethernet interface link state will be set to block (EFM
down),and all the data except the OAMPDU is blocked.
The default value is disabled(2).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.1 |
hwDot3ahEfmHoldUpTimeThis object specifies the time elapsed an EFM interface is
in the faulty state. The value ranges from 0 to 50 in seconds.
The default value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.2 |
hwDot3ahEvrrpTableThis table contains information about the OAM Evrrp project for
a particular Ethernet like interface. SEQUENCE OF HwDot3ahEvrrpEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.9 |
hwDot3ahEvrrpEntryAn entry in the table of hwDot3ahEvrrpTable, containing information on
the OAM Evrrp entity for a single Ethernet like interface.
Note that there is at most one OAM Evrrp for each Ethernet like
interface. HwDot3ahEvrrpEntry .1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1 |
hwDot3ahEvrrpCpuStateThis object indicates the state in the OAMPDU which sended by
the peer interface.
If it is master(1), EFM will make the link work as the master
state. And if it is slave(2), EFM will make the link works as
the slave chain link.
The default state is unknown(3). That means the peer interface
didn't send any OAMPDU which contains the state of link status.ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.1 |
hwDot3ahEvrrpTriggerIfDownThis object indicates whether EFM is bound to the interface.
If it is enabled(1), after EFM checks that the link times out,
the current Ethernet interface link state will be set to EFM
down. And all of the PDU operation will be stop.
The default value is disabled(2).rwobsolete EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.2 |
hwDot3ahEvrrpHoldUpTimeThis object specifies the time elapsed an EFM interface is
in the faulty state. The value ranges from 0 to 50 in seconds.
The default value is 0.rwobsolete Integer32 .1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.3 |
hwOamManager OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.3 |
hwTestMessage OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.4 |
hwTestMessageObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.4.1 |
hwTestMessageTableNextIndexSearch the next hwTestMessageTable instance.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.1 |
hwTestMessageTableThe definition of the tested packets format and the transmission of the tested packets SEQUENCE OF HwTestMessageEntry .1.3.6.1.4.1.2011.5.25.136.1.4.1.2 |
hwTestMessageEntryEntry for Test Message Table. HwTestMessageEntry .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1 |
hwTestMessageIndexSet the index for the tested packets table Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.1 |
hwTestMessageMacAddressThe destination MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.11 |
hwTestMessageVlanIDVLAN indexrw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.12 |
hwTestMessageInterfaceIf the interface is specified, specify the interface name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.13 |
hwTestMessageServiceInstanceName of the service instancerw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.14 |
hwTestMessagePacketSizeThe length of the sent tested packets ranges from 64 to 1518 in byte, and the default value is 64.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.15 |
hwTestMessageSendPacketsThe number of the sent tested packets ranges from 1 to 65535 in integer, and the default value is 5.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.16 |
hwTestMessageSendSpeedEnumerated type indicates the rate of sending the packets: oneMbps and fiveMbps. The default is oneMbps.rw HWTestMessageSendSpeed .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.17 |
hwTestMessageSendEnabledThe sending and termination of the tested packetsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.18 |
hwTestMessageSendFinishedView whether the tested packets are stopped to be sent:
1, 2, 3, 4, and 5 indicate that has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupted (through ctrl+c or mib)ro HWTestMessageFinishedValue .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.19 |
hwTestMessageRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.51 |
hwTestMessageResultTableView the returned results after tests SEQUENCE OF HwTestMessageResultEntry .1.3.6.1.4.1.2011.5.25.136.1.4.1.3 |
hwTestMessageResultEntryEntry for Test Message Table. HwTestMessageResultEntry .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1 |
hwTestMessageResultSendPacketsThe number of the sent packetsro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.11 |
hwTestMessageResultReceivedPacketsThe number of the received packetsro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.12 |
hwTestMessageResultPacketsLostPackets loss ratioro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.13 |
hwTestMessageResultSendBytesThe number of the sent bytesro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.14 |
hwTestMessageResultReceivedBytesThe number of the received bytesro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.15 |
hwTestMessageResultBytesLostThe number of the lost bytesro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.16 |
hwTestMessageBeginTimeStampThe time of starting the Test operationro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.17 |
hwTestMessageEndTimeStampThe time of ending the Test operationro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.18 |
hwEthOamTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.6 |
hwDot1agCfmFaultAlarmA MEP has lost contact with one or more MEPs. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Whenever a MEP loses contact with one or more other MEPs,
it may or may not generate a Fault Alarm to warn the system
administrator of the problem, as controlled by the MEP
Fault Notification Generator State Machine and associated
Managed Objects. Only the highest-priority defect, as shown
in Table 20-1, is reported in the Fault Alarm.
hwDot1agCfmRMepMacAddress The MAC address of the remote faulty MEP
hwDot1agCfmRMepHighestPrDefect The fault in the highest level
hwDot1agCfmMdName The name of the faulty MD
hwDot1agCfmMdLevel The level of the faulty MD
hwDot1agCfmMaName The name of the faulty MA NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.1 |
hwTestMessageFailedThe events after tests are reported.
1,2,3,4, and 5 indicate has not run/is running/the previous test terminates normally/the previous test terminate abnormally/the previous test is interrupted.
(through ctrl+c or mib) NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.2 |
hwTestMessageCompletedAfter the test is complete, report the results to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.3 |
hwDot3ahEfmThresholdEventA hwDot3ahEfmThresholdEvent notification is sent when a local or
remote threshold crossing event is detected. A local
threshold crossing event is detected by the local entity,
while a remote threshold crossing event is detected by the
reception of an Ethernet OAM Event Notification OAMPDU
indicating a threshold event.
This notification should not be sent more than once per
second.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of in the
hwDot3ahEfmEventLogTable.
The management entity should periodically check
hwDot3ahEfmEventLogTable to detect any missed events. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.4 |
hwDot3ahEfmNonThresholdEventA hwDot3ahEfmNonThresholdEvent notification is sent when a local
or remote non-threshold crossing event is detected. A local
event is detected by the local entity, while a remote event is
detected by the reception of an Ethernet OAM Event
Notification OAMPDU indicating a non-threshold crossing event.
This notification should not be sent more than once per
second.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of the
hwDot3ahEfmEventLogTable.
The management entity should periodically check
hwDot3ahEfmEventLogTable to detect any missed events. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.5 |
hwDot3ahEfmRemoteDyingGaspEventA hwDot3ahEfmRemoteDyingGaspEvent notification is sent when a remote
Dying-Gasp event is detected. A remote event is detected by
the reception of an Ethernet OAM Event Notification OAMPDU
indicating a Dying-Gasp event. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.8 |
hwDot3ahEfmNonThresholdRecoveryA hwDot3ahEfmNonThresholdRecovery notification is sent when a hwDot3ahEfmNonThresholdEvent is recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.17 |
hwCfmVlanOnewayDelayIn the VLAN networking, the oneway delay exceeded the trap threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.23 |
hwCfmVlanOnewayDelayRecoveryIn the VLAN networking, the oneway delay fell below the trap threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.24 |
hwCfmVlanTwowayDelayIn the VLAN networking, the twoway delay exceeded the trap threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.25 |
hwCfmVlanTwowayDelayRecoveryIn the VLAN networking, the twoway delay fell below the trap threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.26 |
hwDot3ahEfmLoopbackFailedA hwDot3ahEfmLoopbackFailed notification is sent when failed to start
loopback on a interface.
This notification should not be sent more than once per
second. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.29 |
hwY1731AisDefectAlarmAIS status has been entered. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.30 |
hwY1731AisDefectAlarmRecoveryAIS status has been existed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.31 |
hwDot1agCfmUnexpectedMEGLevelIndicates a CCM frame with unexpected MEG level. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.32 |
hwDot1agCfmUnexpectedMEGLevelClearedIndicates resuming from receiving a CCM frame with unexpected MEG level. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.33 |
hwDot1agCfmMismergeIndicates a CCM frame with unexpected MEG ID NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.34 |
hwDot1agCfmMismergeClearedIndicates resuming from receiving a CCM frame with unexpected MEG ID. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.35 |
hwDot1agCfmUnexpectedMEPIndicates a CCM frame with unexpected MEP ID. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.36 |
hwDot1agCfmUnexpectedMEPClearedIndicates resuming from receiving a CCM frame with unexpected MEP ID. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.37 |
hwDot1agCfmUnexpectedPeriodIndicates a CCM frame with unexpected period. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.38 |
hwDot1agCfmUnexpectedPeriodClearedIndicates resuming from receiving a CCM frame with unexpected period. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.39 |
hwDot1agCfmUnexpectedMACIndicates a CCM frame with unexpected MAC. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.40 |
hwDot1agCfmUnexpectedMACClearedIndicates a CCM frame with unexpected MAC. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.41 |
hwDot1agCfmLOCIndicates that the session losses of continuity. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.42 |
hwDot1agCfmLOCClearedIndicates that the session resumes from lossing of continuity. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.43 |
hwDot1agCfmExceptionalMACStatusIndicates the remote MEP is reporting an error status in its Port Status TLV or Interface Status TLV. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.44 |
hwDot1agCfmExceptionalMACStatusClearedIndicates the remote MEP resumes from an error status indicated in its Port Status TLV or Interface Status TLV. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.45 |
hwDot1agCfmRDIIndicates that MEP receives a CCM frame with the RDI field set. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.46 |
hwDot1agCfmRDIClearedIndicates that MEP receives a CCM frame with the RDI field cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.47 |
hwY1731AisExceedMaxPktNumIndicates that the number of AIS packets transmitted in one second exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.48 |
hwY1731AisExceedMaxPktNumClearedIndicates that the number of AIS packets transmitted in one second under the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.49 |
hwY1731LckDefectLCK status has been entered. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.50 |
hwY1731LckDefectClearedLCK status has been exited. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.51 |
hwY1731StatisticThe Y.1731 statistic value exceeded the upper limit value of the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.52 |
hwY1731StatisticClearThe Y.1731 statistic value fell below lower limit value of the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.53 |
hwY1731LckExceedThresholdIndicates that the number of LCK packets transmitted in 1 second exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.54 |
hwY1731LckExceedThresholdRecoveryIndicates that the number of LCK packets transmitted in 1 second falls below the lower limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.136.1.6.55 |
hwEthOamConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.7 |
hwEthOamCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.7.1 |
hwEthOamGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.7.2 |
hwEthOamY1731 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.8 |
hwY1731ConfigObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.8.1 |
hwY1731BaseConfigTableThis table is used to configure OAM functions for base. SEQUENCE OF HwY1731BaseConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.1 |
hwY1731BaseConfigEntryThe configuration entry of base config. HwY1731BaseConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1 |
hwY1731PwMeasureModeThis object indicates the PW measure mode.
The value can be:
invalid
symmetry
asymmetry
If MA associates with a VLAN, the value is invalid.
If MA associates with VSI or VLL, the default value is asymmetry.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.1 |
hwY1731OneDelayThresholdThis object indicates the alarm threshold for the one-way ETH-DM.
This object can be set only in VLAN.
The value ranges from 1 to 4294967295.
If hwY1731OneDelayThreshold is set to 0, the default alarm threshold of the one-way frame delay is used. By default, no alarm threshold of the one-way frame delay is set.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.2 |
hwY1731TwoDelayThresholdThis object indicates the alarm threshold for the two-way ETH-DM.
This object can be set only in VLAN.
The value ranges from 1 to 4294967295.
If hwY1731TwoDelayThreshold is set to 0, the default alarm threshold of the two-way frame delay is used. By default, no alarm threshold of the two-way frame delay is set.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.3 |
hwY1731ConfigTableThis table is used to configure OAM functions for performance monitoring. SEQUENCE OF HwY1731ConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.2 |
hwY1731ConfigEntryThe configuration entry of performance monitoring functions. HwY1731ConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1 |
hwY1731RemoteIpThis object indicates the IP address of the remote end. IpAddress .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.1 |
hwY1731VcIdThis object indicates the VC ID. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.2 |
hwY1731MacAddressThis object indicates the MAC address of the remote end. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.3 |
hwY1731ResvIndexThis object indicates the index for reserve. Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.4 |
hwY1731ServiceTypeThis object indicates the type of service.
The service can be:
vlan
vsi
vll
unbindro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.5 |
hwY1731SingleLossRecvEnableThis object indicates whether the single-ended ETH-LM receiving is enabled on the MEP
in the MA to implement the single-ended ETH-LM.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.6 |
hwY1731OneDelayRecvEnableThis object indicates whether the one-way ETH-DM receiving is enabled on the MEP
in the MA to implement the one-way ETH-DM.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.7 |
hwY1731OneDelayRecvEnableIsContinueThis object indicates whether the one-way ETH-DM receiving is continual.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.8 |
hwY1731TwoDelayRecvEnableThis object indicates whether the two-way ETH-DM receiving is enabled on the MEP
in the MA to implement the two-way ETH-DM.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.9 |
hwY1731SingleLossEnableThis object indicates whether the single-ended ETH-LM sending is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.10 |
hwY1731SingleLossIsContinueThis object indicates whether the single-ended ETH-LM sending is continual.
If the value is 'false', it indicates that the single-ended ETH-LM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.11 |
hwY1731SingleLossMepIdThis object indicates the ID of the local MEP that is specified
in the single-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.12 |
hwY1731SingleLossDestIsMepIdThis object indicates whether the destination MAC address of
the single-ended ETH-LM is the specified RMEP's MAC address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.13 |
hwY1731SingleLossDestMepIdThis object indicates the ID of the remote MEP that is specified
in the single-ended ETH-LM operation.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.14 |
hwY1731SingleLossMacAddressThis object indicates the MAC address of the remote end.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.15 |
hwY1731SingleLossIntervalThis object indicates the interval of the sent LMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 seconds
30 secondsrw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.16 |
hwY1731SingleLossCountThis object indicates the number of LMM frames to be sent.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0.rw Integer32 (0 | 1..60) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.17 |
hwY1731SingleLoss8021pValueThis object indicates the 802.1p priority of the sent LMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.rw Integer32 (0 | 1..255) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.18 |
hwY1731DualLossEnableThis object indicates whether the dual-ended ETH-LM is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.19 |
hwY1731DualLossMepIdThis object indicates the ID of the local MEP that is specified
in the dual-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.20 |
hwY1731DualLossDestMepIdThis object indicates the ID of the remote MEP that is specified
in the dual-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.21 |
hwY1731OneDelayEnableThis object indicates whether the one-way ETH-DM sending is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.22 |
hwY1731OneDelayIsContinueThis object indicates whether the one-way ETH-DM sending is continual.
If the value is 'false', it indicates that the one-way ETH-DM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.23 |
hwY1731OneDelayMepIdThis object indicates the ID of the local MEP that is specified
in the one-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.24 |
hwY1731OneDelayDestIsMepIdThis object indicates whether the destination MAC address of
the one-way ETH-DM is the specified RMEP's MAC address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.25 |
hwY1731OneDelayDestMepIdThis object indicates the ID of the remote MEP that is specified
in the one-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.26 |
hwY1731OneDelayMacAddressThis object indicates the MAC address of the RMEP.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.27 |
hwY1731OneDelayIntervalThis object indicates the interval of the sent 1DM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 seconds
30 secondsrw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.28 |
hwY1731OneDelayCountThis object indicates the number of the sent 1DM frames.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0.rw Integer32 (0 | 1..60) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.29 |
hwY1731OneDelay8021pValueThis object indicates the 802.1p priority of the sent 1DM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0, 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.rw Integer32 (0 | 1..255) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.30 |
hwY1731TwoDelayEnableThis object indicates whether the two-way ETH-DM sending is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.31 |
hwY1731TwoDelayIsContinueThis object indicates whether the two-way ETH-DM sending is continual.
If the value is 'false', it indicates that the two-way ETH-DM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.32 |
hwY1731TwoDelayMepIdThis object indicates the ID of the local MEP that is specified
in the two-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.33 |
hwY1731TwoDelayDestIsMepIdThis object indicates whether the destination MAC address of
the two-way ETH-DM is the specified RMEP's MAC address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.34 |
hwY1731TwoDelayDestMepIdThis object indicates the ID of the remote MEP that is specified
in the two-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.35 |
hwY1731TwoDelayMacAddressThis object indicates the destination MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.36 |
hwY1731TwoDelayIntervalThis object indicates the interval of the sent DMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 seconds
30 secondsrw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.37 |
hwY1731TwoDelayCountThis object indicates the number of the sent DMM frames.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0.rw Integer32 (0 | 1..60) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.38 |
hwY1731TwoDelay8021pValueThis object indicates the 802.1p priority of the sent DMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.rw Integer32 (0 | 1..255) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.39 |
hwY1731SingleLossRecv8021pValueThis object indicates the 802.1p priority of the received LMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.rw Integer32 (0 | 1..255) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.40 |
hwY1731OneDelayRecv8021pValueThis object indicates the 802.1p priority of the received 1DM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.rw Integer32 (0 | 1..255) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.41 |
hwY1731TwoDelayRecv8021pValueThis object indicates the 802.1p priority of the received DMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.rw Integer32 (0 | 1..255) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.42 |
hwY1731SingleLossRecvMepIdThis object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.43 |
hwY1731OneDelayRecvMepIdThis object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.44 |
hwY1731TwoDelayRecvMepIdThis object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.45 |
hwY1731OneDelayPacketSizeThis object indicates the size of one-way ETH-DM packet.
The value can be 0 or ranges from 64 to 1518.
The value 0 means that the packet size is not specified.
By default, the value is 0.rw Integer32 (0 | 64..1518) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.46 |
hwY1731TwoDelayPacketSizeThis object indicates the size of a two-way ETH-DM packet.
The value can be 0 or ranges from 64 to 1518.
The value 0 means that the packet size is not specified.
By default, the value is 0.rw Integer32 (0 | 64..1518) .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.47 |
hwY1731AisTableThis table is used to configure the Alarm Indication Signal (AIS)
function to suppress alarms. SEQUENCE OF HwY1731AisEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.3 |
hwY1731AisEntryThe entry of alarm indication signal. HwY1731AisEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1 |
hwY1731AisEnableThis object indicates whether the AIS function is enabled in
the current MA. The value of this object can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.1 |
hwY1731AisSendLevelThis object indicates the level of the sent AIS frames.
The value can be -1 or ranges from 0 to 7.
The value -1 is an invalid value.rw Integer32 (-1 | 0..7) .1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.2 |
hwY1731AisSendIntervalThis object indicates the interval of the sent AIS frames.
The value can be:
1 second
60 seconds
The default value is 1 second.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.3 |
hwY1731AisSendPktStatusThis object indicates whether the current MA is sending AIS frames.
The value can be:
enabled
disabled
By default, the value is disabled.ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.4 |
hwY1731AisSuppressEnableThis object indicates whether the alarm suppression function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.5 |
hwY1731AisSuppressStatusThis object indicates whether the alarm function on the current
device is in the suppression state. The value can be:
enabled
disabledro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.3.1.6 |
hwY1731AisVlanTableThis table is used to configure the information about the VLAN that
receives AIS frames. SEQUENCE OF HwY1731AisVlanEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.4 |
hwY1731AisVlanEntryThe entry of alarm indication signal about vlan infomation. HwY1731AisVlanEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1 |
hwY1731AisPeVlanThis object indicates the ID of the PE VLAN corresponding to
the AIS function.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.1 |
hwY1731AisLowCeVlanThis object indicates the lower limit of the ID of the CE VLAN
corresponding to the AIS function.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.2 |
hwY1731AisHighCeVlanThis object indicates the upper limit of the ID of the CE VLAN
corresponding to the AIS function.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.3 |
hwY1731AisLowDot1qVlanThis object indicates the lower limit of the ID of the dot1q VLAN
corresponding to the AIS function.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.4 |
hwY1731AisHighDot1qVlanThis object indicates the upper limit of the ID of the dot1q VLAN
corresponding to the AIS function.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.5 |
hwY1731AisRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.4.1.99 |
hwY1731AisLinkStatusTableThis table is used to enable Y.1731 to send AIS packets when the status of the interface which is monitored goes down. SEQUENCE OF HwY1731AisLinkStatusEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.5 |
hwY1731AisLinkStatusEntryThe entry of AIS monitoring the link status of the interface. HwY1731AisLinkStatusEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1 |
hwY1731AisLinkStatusIfIndexThis object indicates the index of the interface which is monitored by AIS. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1.1 |
hwY1731AisLinkRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.5.1.20 |
hwY1731MulPingTableThis table is used to configure the multicast MAC ping function. SEQUENCE OF HwY1731MulPingEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.6 |
hwY1731MulPingEntryThe entry of multicast ping. HwY1731MulPingEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1 |
hwY1731MulPingIndexThis object indicates the index of this table. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.1 |
hwY1731MulPingStateThis object indicates whether the multicast MAC ping function is enabled.
The value can be:
enabled
disabled
By default, the value is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.2 |
hwY1731MulPingMdNameThis object indicates the name of the MD that initiates the multicast MAC ping.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.3 |
hwY1731MulPingMaNameThis object indicates the name of the MA that initiates the multicast MAC ping.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.4 |
hwY1731MulPingMepIdThis object indicates the ID of the local MEP of the 802.1ag
MAC multicast ping operation.
The value ranges from 1 to 8191.
By default, the value is 0.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.5 |
hwY1731MulPingTimeoutThis object indicates the timeout period of the multicast MAC ping.
The value ranges from 1 to 65535, in milliseconds.
By default, the value is 5000.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.6 |
hwY1731MulPingCountThis object indicates the number of the sent multicast LBM packets.
By default, the value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.7 |
hwY1731MulPingPriorityThis object indicates the priority of the sent LBM packets.
The value ranges from 0 to 7 or can be 255. The value 255 is an invalid value.
The greater the value is, the higher the priority is.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.8 |
hwY1731MulPingSendPacketNumThis object indicates the number of multicast LBM packets that have been sent.ro Counter32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.9 |
hwY1731MulPingRecvPacketNumThis object indicates the number of multicast LBM packets that have been received.ro Counter32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.10 |
hwY1731MulPingRecvTimeDelayMinThis object indicates the minimum delay after which LBR packets are received.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.11 |
hwY1731MulPingRecvTimeDelayMaxThis object indicates the maximum delay after which LBR packets are received.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.12 |
hwY1731MulPingRecvTimeDelayAvgThis object indicates the average delay after which LBR packets are received.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.13 |
hwY1731MulPingRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.6.1.99 |
hwY1731MulPingReplyTableThis table is used to display information about the multicast
LBRs for responding to the multicast MAC ping operation. SEQUENCE OF HwY1731MulPingReplyEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.7 |
hwY1731MulPingReplyEntryThe entry of multicast ping reply. HwY1731MulPingReplyEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1 |
hwY1731MulPingReplySeqNumberThis object indicates the sequence number of the multicast LBR. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.1 |
hwY1731MulPingReplyOrderThis object indicates the order in which multicast LBRs are received. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.2 |
hwY1731MulPingReplyMepIdThis object indicates the MEP ID carried in the multicast LBRs.
The value ranges from 0 to 8191.
The value 0 is an invalid value.ro Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.3 |
hwY1731MulPingReplyMacAddressThis object indicates the MAC address carried in the multicast LBRs.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.4 |
hwY1731MulPingReplyTransTimeThis object indicates the period from the time when the multicast LBM
is sent to the time when the multicast LBR is received.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.7.1.5 |
hwY1731AisVlanConfigTableThis table is used to configure the information about the VLAN that
receives AIS frames. SEQUENCE OF HwY1731AisVlanConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.8 |
hwY1731AisVlanConfigEntryThe entry of alarm indication signal about vlan infomation. HwY1731AisVlanConfigEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1 |
hwY1731AisConfigPeVlanThis object indicates the ID of the PE VLAN corresponding to the AIS function.
The value 0 indicates that the PE VLAN is not set. VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.1 |
hwY1731AisConfigVlanListLowIf hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 1 to 2047. The hwY1731AisConfigVlanListHigh value ranges 2048 to 4094.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.2 |
hwY1731AisConfigVlanListHighIf hwY1731AisConfigPeVlan is set to 0, the object indicates a VLAN list corresponding to the AIS function. If its value is not 0, this object indicates a CE VLAN list. The VLAN ID ranges 2048 to 4094. The hwY1731AisConfigVlanListLow value ranges value 1 to 2047.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.3 |
hwY1731AisVlanConfigRowStatusThis object indicates the row status of this table.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.8.1.4 |
hwY1731TestIdTableThis table defines the information about TestId. SEQUENCE OF HwY1731TestIdEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.9 |
hwY1731TestIdEntryThe configuration entry of TestId. HwY1731TestIdEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1 |
hwY1731TestIdentifierThis object indicates the ID of the test.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.1 |
hwY1731TestIdMdNameThis object indicates the name of the MD in which TestId is configured.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.2 |
hwY1731TestIdMaNameThis object indicates the name of the MA in which TestId is configured.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.3 |
hwY1731TestIdLocalMepIdThis object indicates the ID of the local MEP that is specified
in the TestId configuration.rw Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.4 |
hwY1731TestIdDestIsMepIdThis object indicates whether the destination MAC address
is the specified RMEP's MAC address.
The default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.5 |
hwY1731TestIdDestMepIdThis object indicates the ID of the remote MEP that is specified
in the TestId configuration.rw Integer32 (0 | 1..8191) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.6 |
hwY1731TestIdDestMepMacAddressThis object indicates the MAC address of the remote end.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.7 |
hwY1731TestIdOnwardMacAddressThis object indicates the onward MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.8 |
hwY1731TestIdBackwardMacAddressThis object indicates the backward MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.9 |
hwY1731TestIdIsUpdateOnwardMacAddressThis object indicates whether the onward MAC address is updated automatically.
The default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.10 |
hwY1731TestIdIsUpdateBackwardMacAddressThis object indicates whether the backward MAC address is updated automatically.
The default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.11 |
hwY1731TestId8021pValueThis object indicates the 802.1p priority.
The value 255 is an invalid value.rw Integer32 (0..7 | 255 ) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.12 |
hwY1731TestIdUplink8021pThis object indicates the 802.1p priority of uplink packets.
The value 255 is an invalid value.rw Integer32 (0..7 | 255 ) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.13 |
hwY1731TestIdDownlink8021pThis object indicates the 802.1p priority of downlink packets.
The value 255 is an invalid value.rw Integer32 (0..7 | 255 ) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.14 |
hwY1731TestIdDescriptionThis object indicates the description of TestId.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.15 |
hwY1731TestIdIsRecordFileThis object indicates whether the statistics of the testid will be recorded in testid file.
The default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.16 |
hwY1731TestIdRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.9.1.99 |
hwY1731TestIdSingleEndedLMSendTableThis table configures the single-ended ETH-LM sending function. SEQUENCE OF HwY1731TestIdSingleEndedLMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.10 |
hwY1731TestIdSingleEndedLMSendEntryThe configuration entry of the single-ended ETH-LM sending function. HwY1731TestIdSingleEndedLMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1 |
hwY1731TestIdSingleEndedLMSendIsContinueThis object indicates whether single-ended ETH-LM sending is continual.
If the value is 'false', it indicates that the single-ended ETH-LM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.1 |
hwY1731TestIdSingleEndedLMSendIntervalThis object indicates the interval at which LMM frames are sent.
the value can be:
1 second
10 seconds
30 seconds
60 secondsrw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.2 |
hwY1731TestIdSingleEndedLMSendCountThis object indicates the number of the sent LMM frames.
The value can be 0 or ranges from 1 to 60.
In a proactive OAM scenario, the value is 0.rw Integer32 (0 | 1..60) .1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.3 |
hwY1731TestIdSingleEndedLMSendRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.10.1.99 |
hwY1731TestIdSingleEndedLMReceiveTableThis table configures the single-ended ETH-LM receiving function. SEQUENCE OF HwY1731TestIdSingleEndedLMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.11 |
hwY1731TestIdSingleEndedLMReceiveEntryThe configuration entry of the single-ended ETH-LM receiving function. HwY1731TestIdSingleEndedLMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.11.1 |
hwY1731TestIdSingleEndedLMReceiveRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.11.1.99 |
hwY1731TestIdOneWayDMSendTableThis table configures the one-way ETH-DM sending function. SEQUENCE OF HwY1731TestIdOneWayDMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.12 |
hwY1731TestIdOneWayDMSendEntryThe configuration entry of the one-way ETH-DM sending function. HwY1731TestIdOneWayDMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1 |
hwY1731TestIdOneWayDMSendIsContinueThis object indicates whether one-way ETH-DM sending is continual.
If the value is 'false', it indicates that one-way ETH-DM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.1 |
hwY1731TestIdOneWayDMSendIntervalThis object indicates the interval at which 1DM frames are sent.
the value can be:
1 second
10 seconds
30 seconds
60 secondsrw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.2 |
hwY1731TestIdOneWayDMSendCountThis object indicates the number of 1DM frames to be sent.
In a proactive OAM scenario, the value is 0.rw Integer32 (0 | 1..60) .1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.3 |
hwY1731TestIdOneWayDMSendPacketSizeThis object indicates the size of a one-way ETH-DM packet.
The value 0 means that the packet size is not specified.
By default, the value is 0.rw Integer32 (0 | 64..1518) .1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.4 |
hwY1731TestIdOneWayDMSendRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.12.1.99 |
hwY1731TestIdOneWayDMReceiveTableThis table configures the one-way ETH-DM receiving function. SEQUENCE OF HwY1731TestIdOneWayDMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.13 |
hwY1731TestIdOneWayDMReceiveEntryThe configuration entry of one-way ETH-DM receiving function. HwY1731TestIdOneWayDMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.13.1 |
hwY1731TestIdOneWayDMReceiveIsContinueThis object indicates whether one-way ETH-DM receiving is continual.
If the value is 'false', it indicates that one-way ETH-DM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.13.1.1 |
hwY1731TestIdOneWayDMReceiveRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.13.1.99 |
hwY1731TestIdTwoWayDMSendTableThis table is used to configure the two-way ETH-DM sending function. SEQUENCE OF HwY1731TestIdTwoWayDMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.14 |
hwY1731TestIdTwoWayDMSendEntryThe configuration entry of the two-way ETH-DM sending function. HwY1731TestIdTwoWayDMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1 |
hwY1731TestIdTwoWayDMSendIsContinueThis object indicates whether two-way ETH-DM sending is continual.
If the value is 'false', it indicates that two-way ETH-DM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.1 |
hwY1731TestIdTwoWayDMSendIntervalThis object indicates the interval at which DMM frames are sent.
When on-demand OAM, the value can be:
1 second
10 seconds
30 seconds
60 secondsrw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.2 |
hwY1731TestIdTwoWayDMSendCountThis object indicates the number of DMM frames to be sent.
In a proactive OAM scenario, the value is 0.rw Integer32 (0 | 1..60) .1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.3 |
hwY1731TestIdTwoWayDMSendPacketSizeThis object indicates the size of two-way ETH-DM packet.
The value 0 means that the packet size is not specified.
By default, the value is 0.rw Integer32 (0 | 64..1518) .1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.4 |
hwY1731TestIdTwoWayDMSendRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.14.1.99 |
hwY1731TestIdTwoWayDMReceiveTableThis table configures the two-way ETH-DM receiving function. SEQUENCE OF HwY1731TestIdTwoWayDMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.15 |
hwY1731TestIdTwoWayDMReceiveEntryThe configuration entry of the two-way ETH-DM receiving function. HwY1731TestIdTwoWayDMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.15.1 |
hwY1731TestIdTwoWayDMReceiveRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.15.1.99 |
hwY1731TestIdSingleSynEndedLMSendTableThis table configures the single-ended ETH-SLM sending function. SEQUENCE OF HwY1731TestIdSingleSynEndedLMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.16 |
hwY1731TestIdSingleSynEndedLMSendEntryThe configuration entry of the single-ended ETH-SLM sending function. HwY1731TestIdSingleSynEndedLMSendEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1 |
hwY1731TestIdSingleSynEndedLMSendIsContinueThis object indicates whether single-ended ETH-SLM sending is continual.
If the value is 'false', it indicates that the single-ended ETH-SLM is on-demand.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.1 |
hwY1731TestIdSingleSynEndedLMSendIntervalThis object indicates the interval at which single-ended ETH-SLM frames are sent.
the value can be:
1 second
10 seconds
3.3 milliseconds
10 milliseconds
100 millisecondsrw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.2 |
hwY1731TestIdSingleSynEndedLMSendCountThis object indicates the number of the sent single-ended ETH-SLM frames.
The value can be 0 or ranges from 1 to 1000.
In a proactive OAM scenario, the value is 0.rw Integer32 (0 | 1..1000) .1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.3 |
hwY1731TestIdSingleSynEndedLMSendTimeOutThis object indicates The timeout of single-ended synthetic loss measurement frames
(SLM) waiting for ACK frames (SLR).
The value can be 0 or ranges from 1 to 10.
In a proactive OAM scenario, the value is 0.rw Integer32 (0 | 1..10) .1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.4 |
hwY1731TestIdSingleSynEndedLMSendRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.16.1.5 |
hwY1731TestIdSingleSynEndedLMReceiveTableThis table configures the single-ended ETH-SLM receive function. SEQUENCE OF HwY1731TestIdSingleSynEndedLMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.17 |
hwY1731TestIdSingleSynEndedLMReceiveEntryThe configuration entry of the single-ended ETH-SLM receive function. HwY1731TestIdSingleSynEndedLMReceiveEntry .1.3.6.1.4.1.2011.5.25.136.1.8.1.17.1 |
hwY1731TestIdSingleSynEndedLMReceiveTimeOutThis object indicates the timeout value of receive ETH-SLM frames.
The value can be 0 or ranges from 10 to 300.
In a proactive OAM scenario, the value is 0.rw Integer32 (0 | 10..300) .1.3.6.1.4.1.2011.5.25.136.1.8.1.17.1.1 |
hwY1731TestIdSingleSynEndedLMReceiveRowStatusThis object indicates the row status of this table.
All columns MUST have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.1.17.1.2 |
hwY1731StatisticObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.8.2 |
hwY1731ResetStatisticTableThis table is used to reset statistic information. SEQUENCE OF HwY1731ResetStatisticEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.1 |
hwY1731ResetStatisticEntryThe entry of reset statistic information. HwY1731ResetStatisticEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1 |
hwY1731ResetStatisticTypeThis object indicates the type of reset.
The value can be:
invalid
singleloss
dualloss
onewaydelay
twowaydelay
The default value is invalid.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1.1 |
hwY1731ResetStatistic8021pValueThis object indicates the priority of 802.1p which in the ResetStatistic.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 (0x08)
4 - 16 (0x10)
5 - 32 (0x20)
6 - 64 (0x40)
7 - 128(0x80)
For example, if 802.1p priority is 0 , 4 , 7, the value is 145(1 + 16 + 128).
The value 0 indicates that the priority is not set.rw Integer32 (0 | 1..255) .1.3.6.1.4.1.2011.5.25.136.1.8.2.1.1.2 |
hwY1731StatisticTableThis table is used to store the result about Y1731 statistic information. SEQUENCE OF HwY1731StatisticEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.2 |
hwY1731StatisticEntryAn entry in the table, containing information on the Y1731 statistic entity. HwY1731StatisticEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1 |
hwY1731SingleLossStatisticGatherIntervalThis object identifies an interval for collecting packet loss statistics.ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.1 |
hwY1731SingleLossLocalStatisticThis object identifies the packet loss statistics that are collected on a local end.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.2 |
hwY1731SingleLossLocalRatioThis object identifies the packet loss ratio that are collected on a local end.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.3 |
hwY1731SingleLossLocalRatioMaxThis object identifies the maximum value of packet loss ratio
that are collected on a local end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.4 |
hwY1731SingleLossLocalRatioMinThis object identifies the minimum value of packet loss ratio
that are collected on a local end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.5 |
hwY1731SingleLossLocalRatioAvgThis object identifies the average value of packet loss ratio
that are collected on a local end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.6 |
hwY1731SingleLossRemoteStatisticThis object identifies the packet loss statistics that are collected on a remote end.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.7 |
hwY1731SingleLossRemoteRatioThis object identifies the packet loss ratio that are collected on a remote end.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.8 |
hwY1731SingleLossRemoteRatioMaxThis object identifies the maximum value of packet loss ratio
that are collected on a remote end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.9 |
hwY1731SingleLossRemoteRatioMinThis object identifies the minimum value of packet loss ratio
that are collected on a remote end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.10 |
hwY1731SingleLossRemoteRatioAvgThis object identifies the average value of packet loss ratio
that are collected on a remote end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.11 |
hwY1731OneDelayStatisticThis object indicates the statistics about the one-way delay.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.12 |
hwY1731OneDelayVariationThis object indicates the variation about the one-way delay.
After the device is enabled to receive packets, statistics collected for the first time are invalid, and the value of hwY1731OneDelayVariation is setted to 0.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.13 |
hwY1731OneDelayMaxThis object identifies the maximum variation of the one-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.14 |
hwY1731OneDelayMinThis object identifies the minimum variation of the one-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.15 |
hwY1731OneDelayAvgThis object identifies the average variation of the one-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.16 |
hwY1731TwoDelayStatisticThis object indicates the statistics about the two-way delay.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.17 |
hwY1731TwoDelayVariationThis object indicates the variation about the two-way delay.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.18 |
hwY1731TwoDelayMaxThis object identifies the maximum variation of the two-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.19 |
hwY1731TwoDelayMinThis object identifies the minimum variation of the two-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.20 |
hwY1731TwoDelayAvgThis object identifies the average variation of the two-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.21 |
hwY1731SingleLossLocalMaxThis object identifies the maximum value of packet loss
that are collected on a local end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.22 |
hwY1731SingleLossLocalMinThis object identifies the minimum value of packet loss
that are collected on a local end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.23 |
hwY1731SingleLossLocalAvgThis object identifies the average value of packet loss
that are collected on a local end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.24 |
hwY1731SingleLossRemoteMaxThis object identifies the maximum value of packet loss
that are collected on a remote end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.25 |
hwY1731SingleLossRemoteMinThis object identifies the minimum value of packet loss
that are collected on a remote end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.26 |
hwY1731SingleLossRemoteAvgThis object identifies the average value of packet loss
that are collected on a remote end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.27 |
hwY1731OneDelayStatisticMaxThis object identifies the maximum value of the one-way delay.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.28 |
hwY1731OneDelayStatisticMinThis object identifies the minimum value of the one-way delay.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.29 |
hwY1731OneDelayStatisticAvgThis object identifies the average value of the one-way delay.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.30 |
hwY1731TwoDelayStatisticMaxThis object identifies the maximum value of the two-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.31 |
hwY1731TwoDelayStatisticMinThis object identifies the minimum value of the two-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.32 |
hwY1731TwoDelayStatisticAvgThis object identifies the average value of the two-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.33 |
hwY1731TwoDelayUnresponsivePacketCountThis object identifies the number of unresponsive Delay Measurement Reply frames.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.34 |
hwY1731SingleLossStatistic8021pValueThis object indicates the 802.1p priority.
The value 255 is an invalid value.ro Integer32 (0..7 | 255 ) .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.35 |
hwY1731OneDelayStatistic8021pValueThis object indicates the 802.1p priority.
The value 255 is an invalid value.ro Integer32 (0..7 | 255 ) .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.36 |
hwY1731TwoDelayStatistic8021pValueThis object indicates the 802.1p priority.
The value 255 is an invalid value.ro Integer32 (0..7 | 255 ) .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.37 |
hwY1731OneDelayOnDemandStartTimeThe date and time of the one-way delay on-demand data.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.38 |
hwY1731TwoDelayOnDemandStartTimeThe date and time of the two-way delay on-demand data.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.39 |
hwY1731SingleLossOnDemandStartTimeThe date and time of the single-loss on-demand data.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.2.1.40 |
hwCfmVlanOneDelayTrapLogTableThis table is used to query whether the one-way delay exceeds
the trap threshold in the VLAN scenario. SEQUENCE OF HwCfmVlanOneDelayTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.3 |
hwCfmVlanOneDelayTrapLogEntryAn entry in the table, containing information on the trap entity. HwCfmVlanOneDelayTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1 |
hwCfmOneDelayTrapLogMacAddressThis object indicates the remote MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.1 |
hwCfmVlanOneDelayTrapLogTimestampThis object indicates the timestamp when the delay of the one-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.2 |
hwCfmVlanOneDelayTrapLogDelayValueThis object indicates the delay value when the delay of the one-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.3 |
hwCfmVlanOneDelayTrapLogThresholdThis object indicates the delay trap threshold of the one-way ETH-DM.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.4 |
hwCfmVlanOneDelayTrapLogDelayValueHighThis object indicates the high 32 bits delay value when the delay of the one-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.5 |
hwCfmVlanOneDelayTrapLogDelayValueLowThis object indicates the low 32 bits delay value when the delay of the one-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.3.1.6 |
hwCfmVlanOneDelayRcoverTrapLogTableThis table is used to query whether the one-way delay falls below
the trap threshold. SEQUENCE OF HwCfmVlanOneDelayRcoverTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.4 |
hwCfmVlanOneDelayRcoverTrapLogEntryAn entry in the table, containing information on the recovery trap entity. HwCfmVlanOneDelayRcoverTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1 |
hwCfmOneDelayRecoveryTrapMacAddressThis object indicates the remote MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.1 |
hwCfmVlanOneDelayRecoveryTrapLogTimestampThis object indicates the timestamp when the delay of the one-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.2 |
hwCfmVlanOneDelayRecoveryTrapLogDelayValueThis object indicates the delay value when the delay of the one-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.3 |
hwCfmVlanOneDelayRecoveryTrapLogThresholdThis object indicates the delay trap threshold of the one-way ETH-DM.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.4 |
hwCfmVlanOneDelayRecoveryTrapLogDelayValueHighThis object indicates the high 32 bits delay value when the delay of the one-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.5 |
hwCfmVlanOneDelayRecoveryTrapLogDelayValueLowThis object indicates the low 32 bits delay value when the delay of the one-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.4.1.6 |
hwCfmVlanTwoDelayTrapLogTableThis table is used to query whether the two-way delay exceeds
the trap threshold in the VLAN scenario. SEQUENCE OF HwCfmVlanTwoDelayTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.5 |
hwCfmVlanTwoDelayTrapLogEntryAn entry in the table, containing information on the trap entity. HwCfmVlanTwoDelayTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1 |
hwCfmTwoDelayTrapMacAddressThis object indicates the remote MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.1 |
hwCfmVlanTwoDelayTrapLogTimestampThis object indicates the timestamp when the delay of the two-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.2 |
hwCfmVlanTwoDelayTrapLogDelayValueThis object indicates the delay value when the delay of the two-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.3 |
hwCfmVlanTwoDelayTrapLogThresholdThis object indicates the delay trap threshold of the two-way ETH-DM.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.4 |
hwCfmVlanTwoDelayTrapLogDelayValueHighThis object indicates the high 32 bits delay value when the delay of the two-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.5 |
hwCfmVlanTwoDelayTrapLogDelayValueLowThis object indicates the low 32 bits delay value when the delay of the two-way ETH-DM
in the VLAN is higher than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.5.1.6 |
hwCfmVlanTwoDelayRcoverTrapLogTableThis table is used to query whether the two-way delay falls below
the trap threshold. SEQUENCE OF HwCfmVlanTwoDelayRcoverTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.6 |
hwCfmVlanTwoDelayRcoverTrapLogEntryAn entry in the table, containing information on the recovery trap entity. HwCfmVlanTwoDelayRcoverTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1 |
hwCfmTwoDelayRecoveryTrapMacAddressThis object indicates the remote MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.1 |
hwCfmVlanTwoDelayRecoveryTrapLogTimestampThis object indicates the timestamp when the delay of the two-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.2 |
hwCfmVlanTwoDelayRecoveryTrapLogDelayValueThis object indicates the delay value when the delay of the two-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.3 |
hwCfmVlanTwoDelayRecoveryTrapLogThresholdThis object indicates the delay trap threshold for the two-way ETH-DM.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.4 |
hwCfmVlanTwoDelayRecoveryTrapLogDelayValueHighThis object indicates the high 32 bits delay value when the delay of the two-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.5 |
hwCfmVlanTwoDelayRecoveryTrapLogDelayValueLowThis object indicates the low 32 bits delay value when the delay of the two-way ETH-DM
in the VLAN is lower than the configured trap threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.6.1.6 |
hwY1731StatisticTrapLogTableThis table is used to query whether the Y.1731 statistic value triggers alarm. SEQUENCE OF HwY1731StatisticTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.7 |
hwY1731StatisticTrapLogEntryAn entry in the table, containing information on the statistic trap entity. HwY1731StatisticTrapLogEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1 |
hwY1731StatisticTrapLogTypeSpecific trap type.
Options:
1. OneDelay(1) -indicates the trap type is delay of one-way ETH-DM.
2. TwoDelay(2) -indicates the trap type is delay of two-way ETH-DM.
3. OneDelayVariation(3) -indicates the trap type is delay variation of one-way ETH-DM.
4. TweDelayVariation(4) -indicates the trap type is delay variation of two-way ETH-DM.
5. SingleLossLocalRatio(5) -indicates the trap type is local loss ratio of single-ended ETH-LM.
6. SingleLossRemoteRatio(6) -indicates the trap type is remote loss ratio of single-ended ETH-LM.
7. DualLossLocalRatio(7) -indicates the trap type is local loss ratio of dual-ended ETH-LM.
8. DualLossRemoteRatio(8) -indicates the trap type is remote loss ratio of dual-ended ETH-LM.ro Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.1 |
hwY1731StatisticTrapLogMacAddressThis object indicates the remote MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.2 |
hwY1731StatisticTrapLog8021pPriorityThis object indicates the priority.
The value can be 255 or ranges from 0 to 7.
The value 255 is an invalid value.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.3 |
hwY1731StatisticTrapLogValueThe value that cause the trap.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.4 |
hwY1731StatisticTrapLogUpperLimitThresholdThe upper limit value of the threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.5 |
hwY1731StatisticTrapLogLowerLimitThresholdThe lower limit value of the threshold.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.6 |
hwY1731StatisticTrapLogValueHighThe value that cause the trap.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.7 |
hwY1731StatisticTrapLogValueLowThe value that cause the trap.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.8 |
hwY1731TestIdSingleLossStatTableThis table stores the result of single-ended ETH-LM. SEQUENCE OF HwY1731TestIdSingleLossStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.8 |
hwY1731TestIdSingleLossStatEntryAn entry in the table, containing information about the result of single-ended ETH-LM. HwY1731TestIdSingleLossStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1 |
hwY1731TestIdSingleLossSequenceThis object indicates the sequence number of the single-ended ETH-LM result.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.1 |
hwY1731TestIdSingleLossErrInfoThis object indicates the error information of the single-ended ETH-LM result.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.2 |
hwY1731TestIdSingleLossLocalThis object identifies the packet loss statistics that are collected on a local end.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.3 |
hwY1731TestIdSingleLossLocalRatioThis object identifies the packet loss ratio that is collected on a local end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.4 |
hwY1731TestIdSingleLossRemoteThis object identifies the packet loss statistics that are collected on a remote end.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.5 |
hwY1731TestIdSingleLossRemoteRatioThis object identifies the packet loss ratio that is collected on a remote end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.6 |
hwY1731TestIdSingleLossOnDemandStartTimeThe date and time of the single-loss on-demand data.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.8.1.7 |
hwY1731TestIdOneDelayStatTableThis table stores the result of one-way ETH-DM. SEQUENCE OF HwY1731TestIdOneDelayStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.9 |
hwY1731TestIdOneDelayStatEntryAn entry in the table, containing information about the result of one-way ETH-DM. HwY1731TestIdOneDelayStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1 |
hwY1731TestIdOneDelaySequenceThis object indicates the sequence number of the one-way ETH-DM result.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.1 |
hwY1731TestIdOneDelayErrInfoThis object indicates the error information about the one-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.2 |
hwY1731TestIdOneDelayThis object indicates the statistics about the one-way delay.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.3 |
hwY1731TestIdOneDelayVariationThis object indicates the variation about the one-way delay.
After the device is enabled to receive packets, statistics collected for the first time are invalid, and the value is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.4 |
hwY1731TestIdOneDelayOnDemandStartTimeThe date and time of the one-way delay on-demand data.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.9.1.5 |
hwY1731TestIdTwoDelayStatTableThis table stores the result of two-way ETH-DM. SEQUENCE OF HwY1731TestIdTwoDelayStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.10 |
hwY1731TestIdTwoDelayStatEntryAn entry in the table, containing information about the result of two-way ETH-DM. HwY1731TestIdTwoDelayStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1 |
hwY1731TestIdTwoDelaySequenceThis object indicates the sequence number of the two-way ETH-DM result.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.1 |
hwY1731TestIdTwoDelayErrInfoThis object indicates the error information of the two-way ETH-DM result.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.2 |
hwY1731TestIdTwoDelayThis object indicates the statistics about the two-way delay.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.3 |
hwY1731TestIdTwoDelayVariationThis object indicates the variation about the two-way delay.
After the device is enabled to receive packets, statistics collected for the first time are invalid, and the value is set to 0.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.4 |
hwY1731TestIdTwoDelayOnDemandStartTimeThe date and time of the two-way delay on-demand data.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.10.1.5 |
hwY1731TestIdStatisticResetTableThis table stores the result of two-way ETH-DM. SEQUENCE OF HwY1731TestIdStatisticResetEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.11 |
hwY1731TestIdStatisticResetEntryAn entry in the table, containing information about the result of two-way ETH-DM. HwY1731TestIdStatisticResetEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.11.1 |
hwY1731TestIdResetStatisticTypeThis object indicates the type of reset.
The value can be:
invalid
singleloss
dualloss
onewaydelay
twowaydelay
singlesynloss
The default value is invalid.rw Enumeration .1.3.6.1.4.1.2011.5.25.136.1.8.2.11.1.1 |
hwY1731TestIdTwoDelaySummaryStatTableThis table stores the statistics of two-way ETH-DM collected during the last period. SEQUENCE OF HwY1731TestIdTwoDelaySummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.12 |
hwY1731TestIdTwoDelaySummaryStatEntryAn entry in the table, containing information about the statistics of two-way ETH-DM collected during the last period. HwY1731TestIdTwoDelaySummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1 |
hwY1731TestIdTwoDelayIndexThis object indicates the sequence of the last period. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.1 |
hwY1731TestIdTwoDelayNbrSamplesThis object indicates the sample number of the two-way delay during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.2 |
hwY1731TestIdTwoDelayMaxThis object indicates the maximum value of the two-way delay collected during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.3 |
hwY1731TestIdTwoDelayMinThis object indicates the minimum value of the two-way delay collected during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.4 |
hwY1731TestIdTwoDelayAveThis object indicates the average value of the two-way delay collected during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.5 |
hwY1731TestIdTwoDelayExceedUpLimitNumThis object indicates the num of two-way delay samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.6 |
hwY1731TestIdTwoDelayBelowLowLimitNumThis object indicates the num of two-way delay samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.7 |
hwY1731TestIdTwoDelayVariationNbrSamplesThis object indicates the sample number of the two-way delay variation during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.8 |
hwY1731TestIdTwoDelayVariationMaxThis object indicates the maximum variation of the two-way delay variation collected during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.9 |
hwY1731TestIdTwoDelayVariationMinThis object indicates the minimum variation of the two-way delay variation collected during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.10 |
hwY1731TestIdTwoDelayVariationAveThis object indicates the average variation of the two-way delay variation collected during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.11 |
hwY1731TestIdTwoDelayVarExceedUpLimitNumThis object indicates the num of two-way delay variation samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.12 |
hwY1731TestIdTwoDelayVarBelowLowLimitNumThis object indicates the num of two-way delay variation samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.12.1.13 |
hwY1731TestIdSingleSynLossSummaryStatTableThis table stores the statistics of single-ended ETH-SLM collected during the last period. SEQUENCE OF HwY1731TestIdSingleSynLossSummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.13 |
hwY1731TestIdSingleSynLossSummaryStatEntryAn entry in the table, containing information about the statistics of single-ended ETH-SLM collected during the last period. HwY1731TestIdSingleSynLossSummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1 |
hwY1731TestIdSingleSynLossIndexThis object indicates the sequence of the last period. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.1 |
hwY1731TestIdSingleSynLossNbrSamplesThis object indicates the sample number of the single-ended ETH-SLM result during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.2 |
hwY1731TestIdSingleSynSendRemoteThis object indicates the packet send statistics that are collected on a remote end during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.3 |
hwY1731TestIdSingleSynRecvLocalThis object indicates the packet receive statistics that are collected on a local end during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.4 |
hwY1731TestIdSingleSynLossLocalThis object indicates the packet loss statistics that are collected on a local end during the last period.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.5 |
hwY1731TestIdSingleSynExceedLocalUpLimitNumThis object indicates the number of local loss ratio samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.6 |
hwY1731TestIdSingleSynBelowLocalLowLimitNumThis object indicates the number of local loss ratio samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.7 |
hwY1731TestIdSingleSynSendLocalThis object indicates the packet send statistics that are collected on a local end during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.8 |
hwY1731TestIdSingleSynRecvRemoteThis object indicates the packet receive statistics that are collected on a remote end during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.9 |
hwY1731TestIdSingleSynLossRemoteThis object indicates the packet loss statistics that are collected on a remote end during the last period.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.10 |
hwY1731TestIdSingleSynExceedRemoteUpLimitNumThis object indicates the number of remote loss ratio samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.11 |
hwY1731TestIdSingleSynBelowRemoteLowLimitNumThis object indicates the number of remote loss ratio samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.13.1.12 |
hwY1731SingleLossSummaryStatTableThis table stores the statistics of single-ended ETH-LM collected during the last period. SEQUENCE OF HwY1731SingleLossSummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.14 |
hwY1731SingleLossSummaryStatEntryAn entry in the table, containing information about the statistics of single-ended ETH-LM collected during the last period. HwY1731SingleLossSummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1 |
hwY1731SingleLossIndexThis object indicates the sequence of the last period. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.1 |
hwY1731SingleLossNbrSamplesThis object indicates the sample number of the single-ended ETH-SLM result during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.2 |
hwY1731SingleLossSendRemoteThis object indicates the packet send statistics that are collected on a remote end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.3 |
hwY1731SingleLossRecvLocalThis object indicates the packet receive statistics that are collected on a local end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.4 |
hwY1731SingleLossLossLocalThis object indicates the packet loss statistics that are collected on a local end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.5 |
hwY1731SingleLossExceedLocalUpLimitNumThis object indicates the number of local loss ratio samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.6 |
hwY1731SingleLossBelowLocallowLimitNumThis object indicates the number of local loss ratio samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.7 |
hwY1731SingleLossSendLocalThis object indicates the packet send statistics that are collected on a local end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.8 |
hwY1731SingleLossRecvRemoteThis object indicates the packet receive statistics that are collected on a remote end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.9 |
hwY1731SingleLossLossRemoteThis object indicates the packet loss statistics that are collected on a remote end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.10 |
hwY1731SingleLossExceedRemoteUpLimitNumThis object indicates the number of remote loss ratio samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.11 |
hwY1731SingleLossBelowRemotelowLimitNumThis object indicates the number of remote loss ratio samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.14.1.12 |
hwY1731TestIdSingleLossSummaryStatTableThis table stores the statistics of single-ended ETH-LM collected during the last period with testid. SEQUENCE OF HwY1731TestIdSingleLossSummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.15 |
hwY1731TestIdSingleLossSummaryStatEntryAn entry in the table, containing information about the statistics of single-ended ETH-LM collected during the last period with testid. HwY1731TestIdSingleLossSummaryStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1 |
hwY1731TestIdSingleLossIndexThis object indicates the sequence of the last period. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.1 |
hwY1731TestIdSingleLossNbrSamplesThis object indicates the sample number of the single-ended ETH-SLM result during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.2 |
hwY1731TestIdSingleLossSendRemoteThis object indicates the packet send statistics that are collected on a remote end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.3 |
hwY1731TestIdSingleLossRecvLocalThis object indicates the packet receive statistics that are collected on a local end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.4 |
hwY1731TestIdSingleLossLossLocalThis object indicates the packet loss statistics that are collected on a local end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.5 |
hwY1731TestIdSingleLossExceedLocalUpLimitNumThis object indicates the number of local loss ratio samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.6 |
hwY1731TestIdSingleLossBelowLocallowLimitNumThis object indicates the number of local loss ratio samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.7 |
hwY1731TestIdSingleLossSendLocalThis object indicates the packet send statistics that are collected on a local end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.8 |
hwY1731TestIdSingleLossRecvRemoteThis object indicates the packet receive statistics that are collected on a remote end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.9 |
hwY1731TestIdSingleLossLossRemoteThis object indicates the packet loss statistics that are collected on a remote end during the last period.ro Counter64 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.10 |
hwY1731TestIdSingleLossExceedRemoteUpLimitNumThis object indicates the number of remote loss ratio samples exceeded the upper limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.11 |
hwY1731TestIdSingleLossBelowRemotelowLimitNumThis object indicates the number of remote loss ratio samples fell below lower limit value of the threshold during the last period.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.15.1.12 |
hwY1731TestIdSingleSynLossStatTableThis table stores the result of single-ended ETH-SLM. SEQUENCE OF HwY1731TestIdSingleSynLossStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.16 |
hwY1731TestIdSingleSynLossStatEntryAn entry in the table, containing information about the result of single-ended ETH-SLM. HwY1731TestIdSingleSynLossStatEntry .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1 |
hwY1731TestIdSingleSynLossSequenceThis object indicates the sequence number of the single-ended ETH-SLM result. Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.1 |
hwY1731TestIdSingleSynLossErrInfoThis object indicates the error information of the single-ended ETH-SLM result.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.2 |
hwY1731TestIdSingleSynLossLocalSendThis object indicates the number of local send packets about single-synthetic frame loss.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.3 |
hwY1731TestIdSingleSynLossRemoteSendThis object indicates the number of remote send packets about single-synthetic frame loss.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.4 |
hwY1731TestIdSingleSynLossLocalReceiveThis object indicates the number of local receive packets about single-synthetic frame lossro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.5 |
hwY1731TestIdSingleSynLossUnackThis object indicates the number of local unanswered packets about single-synthetic frame loss.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.6 |
hwY1731TestIdSingleSynLossLossLocalThis object identifies the packet loss statistics that are collected on a local end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.7 |
hwY1731TestIdSingleSynLossLocalRatioThis object identifies the packet loss ratio that is collected on a local end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.8 |
hwY1731TestIdSingleSynLossLossRemoteThis object identifies the packet loss statistics that are collected on a remote end.ro Integer32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.9 |
hwY1731TestIdSingleSynLossRemoteRatioThis object identifies the packet loss ratio that is collected on a remote end.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.10 |
hwY1731TestIdSingleSynLossOnDemandStartTimeThe date and time of the single-synthetic loss on-demand data.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.136.1.8.2.16.1.11 |
hwY1731AisMaxPktNumThe MAXIMUM of AIS packets transmitted in one second.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.3 |
hwY1731PMModeEnableThis object indicates whether the y1731 summary statistic data is managed by Performace(PM) module,
If it is enabled(1), the y1731 summary statistic data is managed, saved ane sent to NMS by Performace(PM) module.
The default value is disabled(2).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.136.1.8.4 |
hwY1731GlobalObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.136.1.8.5 |
hwY1731MaxTestIdThis object indicates the maximum value of TestId in current configuration.
The value can be 0 or rangs from 1 to 4294967295.
The value 0 is an invalid value.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.5.1 |
hwY1731LckMaxPktNumThe max LCK packets transmitted or received in 1 second.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.5.2 |
hwY1731LckCurrentPktNumThe current LCK packets transmitting or receiving.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.5.3 |
hwY1731LckUpperThresholdThe object is used to set the upper threshold value of LCK packets.
The value range is from 1 to 100.
The default means 80.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.5.4 |
hwY1731LckLowerThresholdThe object is used to set the lower threshold value of LCK packets.
The value range is from 1 to 100.
The default means 70.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.136.1.8.5.5 |