HUAWEI-ETHERNET-OPTICMODULE-MIB
AI MIB Summary
The HUAWEI-ETHERNET-OPTICMODULE-MIB enables monitoring and management of optical transceiver parameters on Huawei Ethernet interfaces, specifically tracking optical power levels, laser bias currents, temperatures, and module status states.
This mib is used for managing Ethernet optics module.
Main OID:
hwEthernet.1.3.6.1.4.1.2011.5.14
177
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
177 total| Object Name |
|---|
hwEthernetThis mib is used for managing Ethernet optics module. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.14 |
hwOpticsModuleInformation OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.14.6 |
hwOpticsModuleInformationTableIndicates the optical module table of an Ethernet port. It is used for querying
the information about the optical module of an Ethernet port.
The index of this table is ifIndex. SEQUENCE OF HwOpticsModuleInformationEntry .1.3.6.1.4.1.2011.5.14.6.1 |
hwOpticsModuleInformationEntryIndicates the optical module table of an Ethernet port. It is used for querying
the information about the optical module of an Ethernet port.
The index of this entry is ifIndex. HwOpticsModuleInformationEntry .1.3.6.1.4.1.2011.5.14.6.1.1 |
hwOpticsMDIdentifierIndicate the identifier of optical module.
Options:
1. unknown(1) -unknown the identifier of optical module
2. gbic(2) -the identifier of optical module is gbic
3. solderedToMotherboard(3) -the identifier of optical module is solderedToMotherboard
4. sfp(4) -the identifier of optical module is sfp
5. pin300XBI(5) -the identifier of optical module is pin300XBI
6. xenpak(6) -the identifier of optical module is xenpak
7. xfp(7) -the identifier of optical module is xfp
8. xff(8) -the identifier of optical module is xff
9. xfpe(9) -the identifier of optical module is xfpe
10. xpak(10) -the identifier of optical module is xpak
11. x2(11) -the identifier of optical module is x2ro Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.1 |
hwOpticsMDExtIDIndicate the extended type of optical module.
Options:
1. notSpecifiedOrNotCompliant(1) -the extended type of optical module is notSpecifiedOrNotCompliant
2. moddef1(2) -the extended type of optical module is moddef1
3. moddef2(3) -the extended type of optical module is moddef2
4. moddef3(4) -the extended type of optical module is moddef3
5. bySerialIDOnly(5) -the extended type of optical module is bySerialIDOnly
6. moddef5(6) -the extended type of optical module is moddef5
7. moddef6(7) -the extended type of optical module is moddef6
8. moddef7(8) -the extended type of optical module is moddef7ro Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.2 |
hwOpticsMDConnectorIndicate the type of optical module connector.
Options:
1. unknown(1) -unknown the type of optical module connector
2. sc(2) -the type of optical module connector is sc
3. copperConnector1(3) -the type of optical module connector is copperConnector1
4. copperConnector2(4) -the type of optical module connector is copperConnector2
5. bnctnc(5) -the type of optical module connector is bnctnc
6. coaxialHeaders(6) -the type of optical module connector is coaxialHeaders
7. fiberJack(7) -the type of optical module connector is fiberJack
8. lc(8) -the type of optical module connector is lc
9. mtrj(9) -the type of optical module connector is mtrj
10. mu(10) -the type of optical module connector is mu
11. sg(11) -the type of optical module connector is sg
12. opticalPigtail(12) -the type of optical module connector is opticalPigtail
13. hssdcii(13) -the type of optical module connector is hssdcii
14. copperPigtail(14) -the type of optical module connector is copperPigtail
15. vendorSpecific(15) -the type of optical module connector is vendorSpecificro Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.3 |
hwOpticsMDEncodingIndicate the encoding mechanism.
Options:
1. unspecified(1) -the encoding mechanism is unspecified
2. encodingMethod8B10B(2) -the encoding mechanism is encodingMethod8B10B
3. encodingMethod4B5B(3) -the encoding mechanism is encodingMethod4B5B
4. nrz(4) -the encoding mechanism is nrz
5. manchester(5) -the encoding mechanism is manchester
6. sONETScrambled(6) -the encoding mechanism is sONETScrambled
7. encodingMethod64B66B(7) -the encoding mechanism is encodingMethod64B66Bro Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.4 |
hwOpticsMDBrNominalNominal bit rate.
Unit: 100 MBits/secro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.5 |
hwOpticsMDLength9MicronkmIndicate the link length that is supported by the transceiver while operating in
compliance with the applicable standards using 9 micron Single-mode Fiber.
The maximum value is 255, which means that the transceiver supports a link length
greater than 25.4 km.
Unit: kmro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.6 |
hwOpticsMDLength9MicronIndicate the link length that is supported by the transceiver while operating in
compliance with the applicable standards using 9 micron Single-mode Fiber.
The maximum value is 255, which means that the transceiver supports a link length
greater than 254 km.
Unit: 100mro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.7 |
hwOpticsMDLength50MicronIndicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 50 micron multi-mode OM2 [500MHz*km]
fiber.
The maximum value is 255, which means that the transceiver supports a link
length greater than 2.54 km.
Unit: 10mro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.8 |
hwOpticsMDLength62Micron5Indicate link length that is supported by the transceiver while operating in
compliance with applicable standards using 62.5 micron multi-mode OM1 [200 MHz*km]
fiber.
The maximum value is 255, which means that the transceiver supports a link length
greater than 2.54 km.
Unit: 10mro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.9 |
hwOpticsMDLengthCopperIndicate Link length supported for copper.
Unit: 1mro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.10 |
hwOpticsMDVendorNameIndicate the vendor name of a optical module.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.1.1.11 |
hwOpticsMDVendorOUIIndicate the vendor IEEE company ID of a optical module.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.12 |
hwOpticsMDVendorPNIndicate the part number of a optical module provided by vendor.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.1.1.13 |
hwOpticsMDVendorRevIndicate the revision level for part number provided by vendor.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.1.1.14 |
hwOpticsMDWaveLengthThe laser wavelength.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.15 |
hwOpticsMDCcBaseThe check code for base ID fields(one byte).ro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.16 |
hwOpticsMDOptionsOptions:
1. rateSelect(1) -RATE_SELECT is implemented
2. txDisableAndTheSerialOutputDisabled(2) -TX_DISABLE is implemented and disables the serial output.
3. txFault(3) -TX_FAULT signal implemented.
4. signalLossAndInvertedFromStandard(4) -Loss of Signal implemented, signal inverted from standard definition in SFP MSA.
5. signalLossAndAsDefined(5) -Loss of Signal implemented, signal as defined in SFP MSAro Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.17 |
hwOpticsMDBrMaxThe upper bit rate margin.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.18 |
hwOpticsMDBrMinThe lower bit rate margin.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.19 |
hwOpticsMDVendorSNThe serial number of a optical module provided by vendor.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.1.1.20 |
hwOpticsMDDateCodeThe date code of a optical module.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.1.1.21 |
hwOpticsMDDiagnosticMonitoringTypeIndicate the diagnostic monitoring type.
Options:
1. internallyCalibrated(1) -the diagnostic monitoring type is internallyCalibrated
2. externallyCalibrated(2) -the diagnostic monitoring type is externallyCalibrated
3. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.22 |
hwOpticsMDEnhancedOptionsIndicate enhanced Options.
Options:
1. forAllMonitoredQuantities(1) -optional Alarm/warning flags implemented for all monitored quantities
2. txDisable(2) -optional Soft TX_DISABLE control and monitoring implemented
3. txFault(3) -optional Soft TX_FAULT monitoring implemented
4. rxLOS(4) -optional Soft RX_LOS monitoring implemented
5. rateSelect(5) -optional Soft RATE_SELECT control and monitoring implemented
6. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.23 |
hwOpticsMDSFF8472ComplianceIndicate the SFF-8472 standard.
Options:
1. undefined(1) -not included or undefined.
2. includesSFF8472V93(2) -includes functionality described in Rev 9.3 SFF-8472.
3. includesSFF8472V95(3) -includes functionality described in Rev 9.5 SFF-8472.
4. includesSFF8472V102(4) -includes functionality described in Rev 10.2 SFF-8472.
5. tbd(5) -to be determined.ro Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.24 |
hwOpticsMDCcExtCheck code for the Extended ID Fields.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.1.1.25 |
hwOpticsMDVendorSpecificVendor of Optical module specific information.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.1.1.26 |
hwOpticsMDCLEICodeCLEI code supported by eSFP. Length is 10 bytes.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.1.1.27 |
hwOpticsMDInfoRemoteIndicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.1.1.28 |
hwOpticsModuleTransceiverTableThis table used for querying the information about the optical transceiver of an Ethernet port.
The index of this table is ifindex. SEQUENCE OF HwOpticsModuleTransceiverEntry .1.3.6.1.4.1.2011.5.14.6.2 |
hwOpticsModuleTransceiverEntryThis table used for querying the information about the optical transceiver of an Ethernet port.
The index of this entry is ifindex. HwOpticsModuleTransceiverEntry .1.3.6.1.4.1.2011.5.14.6.2.1 |
hwOpticsMDInfinibandComplianceCodesInfiniband transceiver type.
Options:
1. sx(1) -infiniband transceiver type is sx
2. lx(2) -infiniband transceiver type is lx
3. copperActive(3) -infiniband transceiver type is copperActive
4. copperPassive(4) -infiniband transceiver type is copperPassive
5. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.1 |
hwOpticsMDSONETcomplianceCodesSONET transceiver type.
Options:
1. oC48LongReach(1) -SONET transceiver type is oC48LongReach
2. oC48IntermediateReach(2) -SONET transceiver type is oC48IntermediateReach
3. oC48ShortReach(3) -SONET transceiver type is oC48ShortReach
4. oC12SingleModeLongReach(4) -SONET transceiver type is oC12SingleModeLongReach
5. oC12SingleModeIntermediateReach(5) -SONET transceiver type is oC12SingleModeIntermediateReach
6. oC12MultiModeShortReach(6) -SONET transceiver type is oC12MultiModeShortReach
7. oC3SingleModeLongReach(7) -SONET transceiver type is oC3SingleModeLongReach
8. oC3SingleModeIntermediateReach(8) -SONET transceiver type is oC3SingleModeIntermediateReach
9. oC3MultiModeShortReach(9) -SONET transceiver type is oC3MultiModeShortReach
10. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.2 |
hwOpticsMDGEComplianceCodesEthernet transceiver type.
Options:
1. en1000BASET(1) -Ethernet transceiver type is 1000BASE-T
2. en1000BASECX(2) -Ethernet transceiver type is 1000BASE-CX
3. en1000BASELX(3) -Ethernet transceiver type is 1000BASE-LX
4. en1000BASESX(4) -Ethernet transceiver type is 1000BASE-SX
5. enMULTILX(5) -Ethernet transceiver type is 100BASE-LX&1000BASE-LX
6. en100BASELX(6) -Ethernet transceiver type is 100BASE-LX
7. en100BASEFX(7) -Ethernet transceiver type is 100BASE-FX
8. en1000BASEBX(8) -Ethernet transceiver type is 1000BASE-BX
9. en1000BASEPX(9) -Ethernet transceiver type is 1000BASE-PX
10. en10GBASELRM(10) -Ethernet transceiver type is 10GBASE-LRM
11. en10GBASELR(11) -Ethernet transceiver type is 10GBASE-LR
12. en10GBASESR(12) -Ethernet transceiver type is 10GBASE-SR
13. en100BASEBX(13) -Ethernet transceiver type is 100BASE-BXro Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.3 |
hwOpticsMDLinkLengthFibre Channel link length.
Options:
1. veryLongDistance(1) -fibre channel link length is veryLongDistance
2. shortDistance(2) -fibre channel link length is shortDistance
3. intermediateDistance(3) -fibre channel link length is intermediateDistance
4. longDistance(4) -fibre channel link length is longDistance
5. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.4 |
hwOpticsMDTransmitterTechnologyFibre Channel transmitter technology.
Options:
1. longwaveLaser(1) -fibre channel transmitter technology is longwaveLaser
2. electricalInterenclosure(2) -fibre channel transmitter technology is electricalInterenclosure
3. shortwaveLaser(3) -fibre channel transmitter technology is shortwaveLaser
4. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.5 |
hwOpticsMDTransmissionMediaFibre Channel transmission media.
Options:
1. twinAxialPair(1) -fibre channel transmission media is twinAxialPair
2. shieldedTwistedPair(2) -fibre channel transmission media is shieldedTwistedPair
3. miniatureCoax(3) -fibre channel transmission media is miniatureCoax
4. videoCoax(4) -fibre channel transmission media is videoCoax
5. multiMode62m5(5) -fibre channel transmission media is multiMode62m5
6. multiMode50m(6) -fibre channel transmission media is multiMode50m
7. singleMode(7) -fibre channel transmission media is singleMode
8. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.6 |
hwOpticsMDSpeedFibre Channel speed.
Options:
1. speed400MBytesPerSec(1) -fibre channel speed is 400 MBits/s
2. speed200MBytesPerSec(2) -fibre channel speed is 200 MBits/s
3. speed100MBytesPerSec(3) -fibre channel speed is 100 MBits/s
4. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.7 |
hwOpticsMDTransceiverRemoteIndicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.2.1.8 |
hw10GEOpticsModuleInformationTableIndicates the 10GE optical module information table of an Ethernet port.
It is used for querying the information about the 10GE optical module of
an Ethernet port.
The index of this table is ifindex. SEQUENCE OF Hw10GEOpticsModuleInformationEntry .1.3.6.1.4.1.2011.5.14.6.3 |
hw10GEOpticsModuleInformationEntryIndicates the 10GE optical module information table of an Ethernet port.
It is used for querying the information about the 10GE optical module of
an Ethernet port.
The index of this entry is ifindex. Hw10GEOpticsModuleInformationEntry .1.3.6.1.4.1.2011.5.14.6.3.1 |
hw10GEOpticsMDIdentifierIndicate the identifier of 10GE optical module.
Options:
1. unknown(0) -unknown identifier of 10GE optical module
2. gbic(1) -the identifier of 10GE optical module is gbic
3. solderedToMotherBoard(2) -the identifier of 10GE optical module is solderedToMotherBoard
4. sfp(3) -the identifier of 10GE optical module is sfp
5. pin300XBI(4) -the identifier of 10GE optical module is pin300XBI
6. xenpak(5) -the identifier of 10GE optical module is xenpak
7. xfp(6) -the identifier of 10GE optical module is xfp
8. xff(7) -the identifier of 10GE optical module is xff
9. xfep(8) -the identifier of 10GE optical module is xfep
10. xpak(9) -the identifier of 10GE optical module is xpak
11. x2(10) -the identifier of 10GE optical module is x2ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.1 |
hw10GEOpticsMDExtCLEICodeExtended identifier: CLEI
Options:
1. nonExtCLEICode(0) -no CLEI code present in Table 02h
2. extCLEICode(1) -CLEI code present in Table 02hro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.2 |
hw10GEOpticsMDExtTXRefClockExtended identifier: TX Ref Clock
Options:
1. nonExtTXRefClock(0) -tx Ref Clock Input Not Required
2. extTXRefClock(1) -tx Ref Clock Input Requiredro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.3 |
hw10GEOpticsMDExtCDRFuncExtended identifier: CDR function
Options:
1. nonExtCDRFunc(0) -no CDR version of XFP
2. extCDRFunc(1) -module with CDR functionro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.4 |
hw10GEOpticsMDExtPowerLevelExtended identifier: Power Level
Options:
1. extPowerLevel1(0) -power Level 1 Module (1.5 W max. power dissipation.)
2. extPowerLevel2(1) -power Level 2 Module (2.5W Max)
3. extPowerLevel3(2) -power Level 3 Module (3.5W max. power dissipation.)
4. extPowerLevel4(3) -power Level 4 Module (>3.5W max. power dissipation.)ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.5 |
hw10GEOpticsMDConnectorIndicate the type of 10GE optical module connector.
Options:
1. unknown(0) -unknown the type of 10GE optical module connector
2. sc(1) -the type of 10GE optical module connector is sc
3. style1Connector(2) -the type of 10GE optical module connector is style1Connector
4. style2Connector(3) -the type of 10GE optical module connector is style2Connector
5. bnctnc(4) -the type of 10GE optical module connector is bnctnc
6. channelCoaxial(5) -the type of 10GE optical module connector is channelCoaxial
7. fiberJack(6) -the type of 10GE optical module connector is fiberJack
8. lc(7) -the type of 10GE optical module connector is lc
9. mtrj(8) -the type of 10GE optical module connector is mtrj
10. mu(9) -the type of 10GE optical module connector is mu
11. sg(10) -the type of 10GE optical module connector is sg
12. opticalPigtail(11) -the type of 10GE optical module connector is opticalPigtail
13. hssdc(20) -the type of 10GE optical module connector is hssdc
14. copperPigtail(21) -the type of 10GE optical module connector is copperPigtailro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.6 |
hw10GEOpticsMDEthComplianceBaseEWIndicate 10GBASE-EW support or not.
Options:
1. nonEthComplianceBaseEW(0) -not support 10GBASE-EW
2. ethComplianceBaseEW(1) -support 10GBASE-EWro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.7 |
hw10GEOpticsMDEthComplianceBaseLWIndicate 10GBASE-LW support or not.
Options:
1. nonEthComplianceBaseLW(0) -not support 10GBASE-LW
2. ethComplianceBaseLW(1) -support 10GBASE-LWro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.8 |
hw10GEOpticsMDEthComplianceBaseSWIndicate 10GBASE-SW support or not.
Options:
1. nonEthComplianceBaseSW(0) -not support 10GBASE-SW
2. ethComplianceBaseSW(1) -support 10GBASE-SWro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.9 |
hw10GEOpticsMDEthComplianceBaseLRMIndicate 10GBASE-LRM support or not.
Options:
1. nonEthComplianceBaseLRM(0) -not support 10GBASE-LRM
2. ethComplianceBaseLRM(1) -support 10GBASE-LRMro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.10 |
hw10GEOpticsMDEthComplianceBaseERIndicate 10GBASE-ER support or not.
Options:
1. nonEthComplianceBaseER(0) -not support 10GBASE-ER
2. ethComplianceBaseER(1) -support 10GBASE-ERro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.11 |
hw10GEOpticsMDEthComplianceBaseLRIndicate 10GBASE-LR support or not.
Options:
1. nonEthComplianceBaseLR(0) -not support 10GBASE-LR
2. ethComplianceBaseLR(1) -support 10GBASE-LRro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.12 |
hw10GEOpticsMDEthComplianceBaseSRIndicate 10GBASE-SR support or not.
Options:
1. nonEthComplianceBaseSR(0) -not support 10GBASE-SR
2. ethComplianceBaseSR(1) -support 10GBASE-SRro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.13 |
hw10GEOpticsMDFibreComplianceIndicate 10 Gigabit Fibre Channel Compliance type.
Options:
1. fibreComplianceInter1300FP(16) -intermediate Reach 1300 nm FP
2. fibreComplianceExtended1550(32) -extended reach 1550 nm
3. fibreComplianceSM1200(64) -1200-SM-LL-L
4. fibreComplianceMX1200(128) -1200-MX-SN-I
5. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.14 |
hw10GEOpticsMDLowerSpeedLinkIndicate Lower Speed Links type.
Options:
1. lowerSpeedLinkOC48LR(2) -lower speed links type is OC48LR
2. lowerSpeedLinkOC48IR(4) -lower speed links type is OC48IR
3. lowerSpeedLinkOC48SR(8) -lower speed links type is OC48SR
4. lowerSpeedLinkFCSMF(16) -lower speed links type is FCSMF
5. lowerSpeedLinkFCMMF(32) -lower speed links type is FCMMF
6. lowerSpeedLinkLXSMF(64) -lower speed links type is LXSMF
7. lowerSpeedLinkSXMMF(128) -lower speed links type is SXMMF
8. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.15 |
hw10GEOpticsMDSONETSDHCodesI64point5Indicate SONET/SDH Codes I-64.5 support or not.
Options:
1. notSupport(0) -not Support I-64.5
2. support(1) -support I-64.5ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.16 |
hw10GEOpticsMDSONETSDHCodesI64point3Indicate SONET/SDH Codes I-64.3 support or not.
Options:
1. notSupport(0) -not Support I-64.3
2. support(1) -support I-64.3ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.17 |
hw10GEOpticsMDSONETSDHCodesI64point2Indicate SONET/SDH Codes I-64.2 support or not.
Options:
1. notSupport(0) -not Support I-64.2
2. support(1) -support I-64.2ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.18 |
hw10GEOpticsMDSONETSDHCodesI64point2rIndicate SONET/SDH Codes I-64.2r support or not.
Options:
1. notSupport(0) -not support I-64.2r
2. support(1) -support I-64.2rro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.19 |
hw10GEOpticsMDSONETSDHCodesI64point1Indicate SONET/SDH Codes I-64.1 support or not.
Options:
1. notSupport(0) -not support I-64.1
2. support(1) -support I-64.1ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.20 |
hw10GEOpticsMDSONETSDHCodesI64point1rIndicate SONET/SDH Codes I-64.1r support or not.
Options:
1. notSupport(0) -not support I-64.1r
2. support(1) -support I-64.1rro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.21 |
hw10GEOpticsMDSONETSDHCodesS64point5bIndicate SONET/SDH Codes S-64.5b support or not.
Options:
1. notSupport(0) -not support S-64.5b
2. support(1) -support S-64.5bro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.22 |
hw10GEOpticsMDSONETSDHCodesS64point5aIndicate SONET/SDH Codes S-64.5a support or not.
Options:
1. notSupport(0) -not support S-64.5a
2. support(1) -support S-64.5aro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.23 |
hw10GEOpticsMDSONETSDHCodesS64point3bIndicate SONET/SDH Codes S-64.3b support or not.
Options:
1. notSupport(0) -not support S-64.3b
2. support(1) -support S-64.3bro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.24 |
hw10GEOpticsMDSONETSDHCodesS64point3aIndicate SONET/SDH Codes S-64.3a support or not.
Options:
1. notSupport(0) -not support S-64.3a
2. support(1) -support S-64.3aro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.25 |
hw10GEOpticsMDSONETSDHCodesS64point2bIndicate SONET/SDH Codes S-64.2b support or not.
Options:
1. notSupport(0) -not support S-64.2b
2. support(1) -support S-64.2bro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.26 |
hw10GEOpticsMDSONETSDHCodesS64point2aIndicate SONET/SDH Codes S-64.2a support or not.
Options:
1. notSupport(0) -not support S-64.2a
2. support(1) -support S-64.2aro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.27 |
hw10GEOpticsMDSONETSDHCodesS64point1Indicate SONET/SDH Codes S-64.1 support or not.
Options:
1. notSupport(0) -not support S-64.1
2. support(1) -support S-64.1ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.28 |
hw10GEOpticsMDSONETSDHCodesG959P1L1Indicate SONET/SDH Codes G.959.1 P1L1-2D2 support or not.
Options:
1. notSupport(0) -not support G.959.1 P1L1-2D2
2. support(1) -support G.959.1 P1L1-2D2ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.29 |
hw10GEOpticsMDSONETSDHCodesL64point3Indicate SONET/SDH Codes L-64.3 support or not.
Options:
1. notSupport(0) -not support L-64.3
2. support(1) -support L-64.3ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.30 |
hw10GEOpticsMDSONETSDHCodesL64point2cIndicate SONET/SDH Codes L-64.2c support or not.
Options:
1. notSupport(0) -not support L-64.2c
2. support(1) -support L-64.2cro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.31 |
hw10GEOpticsMDSONETSDHCodesL64point2bIndicate SONET/SDH Codes L-64.2b support or not.
Options:
1. notSupport(0) -not support L-64.2b
2. support(1) -support L-64.2bro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.32 |
hw10GEOpticsMDSONETSDHCodesL64point2aIndicate SONET/SDH Codes L-64.2a support or not.
Options:
1. notSupport(0) -not support L-64.2a
2. support(1) -support L-64.2aro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.33 |
hw10GEOpticsMDSONETSDHCodesL64point1Indicate SONET/SDH Codes L-64.1 support or not.
Options:
1. notSupport(0) -not support L-64.1
2. support(1) -support L-64.1ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.34 |
hw10GEOpticsMDSONETSDHCodesV64point3Indicate SONET/SDH Codes V-64.3 support or not.
Options:
1. notSupport(0) -not support V-64.3
2. support(1) -support V-64.3ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.35 |
hw10GEOpticsMDSONETSDHCodesV64point2bIndicate SONET/SDH Codes V-64.2b support or not.
Options:
1. notSupport(0) -not support V-64.2b
2. support(1) -support V-64.2bro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.36 |
hw10GEOpticsMDSONETSDHCodesV64point2aIndicate SONET/SDH Codes V-64.2a support or not.
Options:
1. notSupport(0) -not support V-64.2a
2. support(1) -support V-64.2aro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.37 |
hw10GEOpticsMDEncodingRZIndicate encoding mechanism RZ support or not.
Options:
1. nonEncodingRZ(0) -not support RZ
2. encodingRZ(1) -support RZro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.38 |
hw10GEOpticsMDEncodingNRZIndicate encoding mechanism NRZ support or not.
Options:
1. nonEncodingNRZ(0) -not support NRZ
2. encodingNRZ(1) -support NRZro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.39 |
hw10GEOpticsMDEncodingSONETIndicate encoding mechanism SONET support or not.
Options:
1. nonEncodingSONET(0) -not support SONET
2. encodingSONET(1) -support SONETro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.40 |
hw10GEOpticsMDEncoding8B10BIndicate encoding mechanism 8B10B support or not.
Options:
1. nonEncoding8B10B(0) -not support 8B10B
2. encoding8B10B(1) -support 8B10Bro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.41 |
hw10GEOpticsMDEncoding64BIndicate encoding mechanism 64B/66B support or not.
Options:
1. nonEncoding64B(0) -not support 64B/66B
2. encoding64B(1) -support 64B/66Bro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.42 |
hw10GEOpticsMDBrMinMinimum bit rate.
Unit: 100 MBits/sro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.43 |
hw10GEOpticsMDBrMaxMaximum bit rate.
Unit: 100 MBits/sro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.44 |
hw10GEOpticsMDSupportLenSMFIndicate the link length that is supported by the transceiver with the applicable standards
using Single-mode Fiber.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.45 |
hw10GEOpticsMDSupportLenE50umIndicate the link length that is supported by the transceiver with the applicable standards
using 2000MHz*km (850nm) extended bandwidth 50 micron core multimode fiber.
Unit: 2mro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.46 |
hw10GEOpticsMDSupportLen50umThis value specifies the link length that is supported by the transceiver with the applicable
standards using 500MHz*km (850 and 1310nm) 50 micron core multimode fiber.
Unit: 1mro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.47 |
hw10GEOpticsMDSupportLen62p5umThis value specifies the link length that is supported by the transceiver with the applicable
standards using 200MHz*km (850 nm)/500 MHz*km (1310 nm) 62.5 micron core multimode fiber.
Unit: 1mro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.48 |
hw10GEOpticsMDSupportLenCopperIndicate the minimum link length that is supported by the transceiver with copper cable.
Unit: 1mro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.49 |
hw10GEOpticsMDTransmitterSupportIndicate the transmitter support tunable or not.
Options:
1. nonTunable(0) -transmitter not support tunable
2. tunable(1) -transmitter support tunablero Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.50 |
hw10GEOpticsMDDetectorIndicate the Detector is enable or not.
Options:
1. nonDetector(0) -detector is disable
2. detector(1) -detector is enablero Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.51 |
hw10GEOpticsMDCooledTransmitterDeviceIndicate the Cooled transmitter is enable or not.
Options:
1. nonSupport(0) -cooled transmitter is disable
2. support(1) -cooled transmitter is enablero Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.52 |
hw10GEOpticsMDWavelengthControlIndicate the wavelength control support or not.
Options:
1. nonSupport(0) -wavelength control not support
2. support(1) -wavelength control supportro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.53 |
hw10GEOpticsMDTransmitterTechnologySupportIndicate the transmitter technology type.
Options:
1. vCSEL850(0) -the transmitter technology type is vCSEL850
2. vCSEL1310(1) -the transmitter technology type is vCSEL1310
3. vCSEL1550(2) -the transmitter technology type is vCSEL1550
4. fP1310(3) -the transmitter technology type is fP1310
5. dFB1310(4) -the transmitter technology type is dFB1310
6. dFB1550(5) -the transmitter technology type is dFB1550
7. eML1310(6) -the transmitter technology type is eML1310
8. eML1550(7) -the transmitter technology type is eML1550
9. cOPPER(8) -the transmitter technology type is cOPPERro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.54 |
hw10GEOpticsMDVendorNameIndicate the vendor name of a 10GE optical module.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.3.1.55 |
hw10GEOpticsMDSupportXFIModeIndicate the XFI loopback mode support or not.
Options:
1. nonSupportXFIMode(0) -the XFI loopback mode not support
2. supportXFIMode(1) -the XFI loopback mode supportro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.56 |
hw10GEOpticsMDSupportLinesideModeIndicate the Lineside loopback mode support or not.
Options:
1. nonSupportLinesideMode(0) -lineside loopback mode not support
2. supportLinesideMode(1) -lineside loopback mode supportro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.57 |
hw10GEOpticsMDMaxBitRateSupportedByCDRIndicate which rate is supported by the CDR.
Options:
1. maxBitRateSupportedByCDR11p1(1) -CDR support for 11.1 Gb/s
2. maxBitRateSupportedByCDR10p7(3) -CDR support for 10.7 Gb/s
3. maxBitRateSupportedByCDR10p5(7) -CDR support for 10.5 Gb/s
4. maxBitRateSupportedByCDR10p3(15) -CDR support for 10.3 Gb/s
5. maxBitRateSupportedByCDR9p95(31) -CDR support for 9.95 Gb/s
6. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.58 |
hw10GEOpticsMDVendorOUIIndicate the vendor IEEE company ID of a 10GE optical module.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.59 |
hw10GEOpticsMDVendorPNIndicate the part number of a 10GE optical module provided by vendor.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.3.1.60 |
hw10GEOpticsMDVendorRevIndicate the revision level for part number provided by vendor.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.3.1.61 |
hw10GEOpticsMDWavelengthThe laser wavelength.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.62 |
hw10GEOpticsMDWaveToleranceThe guaranteed +/- range of transmitter output wavelength under all normal operating conditions.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.63 |
hw10GEOpticsMDMaxCaseTemperatureMaximum Case Temperature in Degrees C.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.64 |
hw10GEOpticsMDCcbaseCc_base.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.65 |
hw10GEOpticsMDMaxDissipationMaximum Power Dissipation.
Max power is 8 bit value * 20 mW.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.66 |
hw10GEOpticsMDMaxDissipationPowerDownModeMaximum Total Power Dissipation in Power Down Mode.
Max Power is 8 bit value * 10 mW.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.67 |
hw10GEOpticsMDMaximum5P0VSupplyMaximum current required by +5V Supply.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.68 |
hw10GEOpticsMDMaximum3P3VSupplyMaximum current required by +3.3V Supply.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.69 |
hw10GEOpticsMDMaximum1P8VSupplyMaximum current required by +1.8V Supply.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.70 |
hw10GEOpticsMDMaximum5P2VSupplyMaximum current required by -5.2V Supply.ro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.71 |
hw10GEOpticsMDVendorSNThe serial number of a 10GE optical module provided by vendor.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.3.1.72 |
hw10GEOpticsMDDateCodeThe date code of a 10GE optical module.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.3.1.73 |
hw10GEOpticsMDDiagnoMonitorPowerMeasureReceived power measurement type.
Options:
1. supportOMA(0) -OMA
2. supportAveragePower(1) -AveragePowerro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.74 |
hw10GEOpticsMDDiagnoMonitorTypeFECBERModule Respond to FEC BER.
Options:
1. nonSupportBER(0) -no BER Support
2. supportBER(1) -BER Supportro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.75 |
hw10GEOpticsMDEnhancedOptionsIndicate enhanced Options.
Options:
1. cmu(0) -enhanced options is cmu
2. rateSelect(2) -enhanced options is rateSelect
3. fec(4) -enhanced options is fec
4. vpsby(8) -enhanced options is vpsby
5. rxLOS(16) -enhanced options is rxLOS
6. txFault(32) -enhanced options is txFault
7. txDisable(64) -enhanced options is txDisable
8. alarmFLGIM(128) -enhanced options is alarmFLGIMro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.76 |
hw10GEOpticsMDAuxInputOneIndicate which quantity is monitored by each auxiliary A/D channel one.
Options:
1. auxInputType1(0) -Auxiliary monitoring not implemented
2. auxInputType2(1) -APD Bias Voltage
3. auxInputType4(3) -TEC Current (mA)
4. auxInputType5(4) -Laser Temperature
5. auxInputType6(5) -Laser Wavelength
6. auxInputType7(6) -+5V Supply Voltage
7. auxInputType8(7) -+3.3V Supply Voltage
8. auxInputType9(8) -+1.8V Supply Voltage
9. auxInputType10(9)
10. auxInputType11(10) -+5V Supply Current
11. auxInputType14(13) -+3.3V Supply Current
12. auxInputType15(14) -+1.8V Supply Current
13. auxInputType16(15)ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.77 |
hw10GEOpticsMDAuxInputTwoIndicate which quantity is monitored by each auxiliary A/D channel two.
Options:
1. auxInputType1(0) -Auxiliary monitoring not implemented
2. auxInputType2(1) -APD Bias Voltage
3. auxInputType4(3) -TEC Current (mA)
4. auxInputType5(4) -Laser Temperature
5. auxInputType6(5) -Laser Wavelength
6. auxInputType7(6) -+5V Supply Voltage
7. auxInputType8(7) -+3.3V Supply Voltage
8. auxInputType9(8) -+1.8V Supply Voltage
9. auxInputType10(9)
10. auxInputType11(10) -+5V Supply Current
11. auxInputType14(13) -+3.3V Supply Current
12. auxInputType15(14) -+1.8V Supply Current
13. auxInputType16(15)ro Enumeration .1.3.6.1.4.1.2011.5.14.6.3.1.78 |
hw10GEOpticsMDCCEXTCC_EXTro Integer32 .1.3.6.1.4.1.2011.5.14.6.3.1.79 |
hw10GEOpticsMDVendorSpecificVendor of 10GE Optical module specific information.ro OCTET STRING .1.3.6.1.4.1.2011.5.14.6.3.1.80 |
hwOpticsDdmInformationTableIndicates the optical module diagnose information table of an Ethernet port.
It is used for querying the diagnose information about the optical module of
an Ethernet port.
The index of this table is ifindex. SEQUENCE OF HwOpticsDdmInformationEntry .1.3.6.1.4.1.2011.5.14.6.4 |
hwOpticsDdmInformationEntryIndicates the optical module diagnose information table of an Ethernet port.
It is used for querying the diagnose information about the optical module of
an Ethernet port.
The index of this entry is ifindex. HwOpticsDdmInformationEntry .1.3.6.1.4.1.2011.5.14.6.4.1 |
hwOpticsTemperatureTemperature.
Unit: 0.000001Cro Integer32 UNITS "0.000001C" .1.3.6.1.4.1.2011.5.14.6.4.1.1 |
hwOpticsSupplyVoltageSupply voltage.
Unit: 0.000001Vro Integer32 UNITS "0.000001V" .1.3.6.1.4.1.2011.5.14.6.4.1.2 |
hwOpticsTxBiasCurrentTransmitted bias current.
Unit: 0.000001Aro Integer32 UNITS "0.000001A" .1.3.6.1.4.1.2011.5.14.6.4.1.3 |
hwOpticsTxPowerTransmitted power.
Unit: 0.000001dBmro Integer32 UNITS "0.000001dBm" .1.3.6.1.4.1.2011.5.14.6.4.1.4 |
hwOpticsRxPowerReceived power.
Unit: 0.000001dBmro Integer32 UNITS "0.000001dBm" .1.3.6.1.4.1.2011.5.14.6.4.1.5 |
hwOpticsMDDdmInfoRemoteIndicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.4.1.6 |
hwOpticsPowerThresholdTableIndicates the optical power threshold table of an Ethernet port.
It is used for querying, setting, and clearing the optical power threshold of an Ethernet port.
After the power threshold is set, the power threshold alarming function of the optical port is enabled.
When the optical power is lower than the lower threshold or higher than the upper threshold, an alarm is reported.
The index of this table is ifindex. SEQUENCE OF HwOpticsPowerThresholdEntry .1.3.6.1.4.1.2011.5.14.6.5 |
hwOpticsPowerThresholdEntryIndicates the optical power threshold table of an Ethernet port.
It is used for querying, setting, and clearing the optical power threshold of an Ethernet port.
After the power threshold is set, the power threshold alarming function of the optical port is enabled.
When the optical power is lower than the lower threshold or higher than the upper threshold, an alarm is reported.
The index of this entry is ifindex. HwOpticsPowerThresholdEntry .1.3.6.1.4.1.2011.5.14.6.5.1 |
hwOpticsPowerThresholdValueTX optical power lower limit threshold value.
Unit: 0.000001dBmrw Integer32 (-99000000..100000000 | 2147483647) UNITS "0.000001dBm" .1.3.6.1.4.1.2011.5.14.6.5.1.1 |
hwOpticsPowerThresholdSwitchOptical power threshold value Switch.
Options:
1. on(1) -set optical power threshold value
2. off(2) -clear optical power threshold value
3. invalid(-1) -invalid value
Default: off(2)rw Enumeration .1.3.6.1.4.1.2011.5.14.6.5.1.2 |
hwOpticsPowerTxUpperThresholdValueTX optical power upper limit threshold value.
Unit: 0.000001dBmrw Integer32 (-99000000..100000000 | 2147483647) UNITS "0.000001dBm" .1.3.6.1.4.1.2011.5.14.6.5.1.3 |
hwOpticsPowerRxUpperThresholdValueRX optical power upper limit threshold value.
Unit: 0.000001dBmrw Integer32 (-99000000..100000000 | 2147483647) UNITS "0.000001dBm" .1.3.6.1.4.1.2011.5.14.6.5.1.4 |
hwOpticsPowerRxLowerThresholdValueRX optical power lower limit threshold value.
Unit: 0.000001dBmrw Integer32 (-99000000..100000000 | 2147483647) UNITS "0.000001dBm" .1.3.6.1.4.1.2011.5.14.6.5.1.5 |
hwOpticsTemperatureLowerThresholdValueOptical temperature lower limit threshold value.
Unit: 0.01Crw Integer32 (-9000..30000 | 2147483647) UNITS "0.01C" .1.3.6.1.4.1.2011.5.14.6.5.1.6 |
hwOpticsTemperatureUpperThresholdValueOptical temperature upper limit threshold value.
Unit: 0.01Crw Integer32 (-9000..30000 | 2147483647) UNITS "0.01C" .1.3.6.1.4.1.2011.5.14.6.5.1.7 |
hwOpticsTemperatureThresholdSwitchOptical temperature threshold value Switch.
Options:
1. on(1) -set optical temparature threshold value
2. off(2) -clear optical temperature threshold value
3. invalid(-1) -invalid value
Default: off(2)rw Enumeration .1.3.6.1.4.1.2011.5.14.6.5.1.8 |
hwOpticsVoltageLowerThresholdValueOptical voltage lower limit threshold value.
Unit: 0.01Vrw Integer32 (0..10000 | 2147483647) UNITS "0.01V" .1.3.6.1.4.1.2011.5.14.6.5.1.9 |
hwOpticsVoltageUpperThresholdValueOptical voltage upper limit threshold value.
Unit: 0.01Vrw Integer32 (0..10000 | 2147483647) UNITS "0.01V" .1.3.6.1.4.1.2011.5.14.6.5.1.10 |
hwOpticsVoltageThresholdSwitchOptical voltage threshold value Switch.
Options:
1. on(1) -set optical voltage threshold value
2. off(2) -clear optical voltage threshold value
3. invalid(-1) -invalid value
Default: off(2)rw Enumeration .1.3.6.1.4.1.2011.5.14.6.5.1.11 |
hwOpticsCurrentLowerThresholdValueOptical current lower limit threshold value.
Unit: mArw Integer32 (0..10000 | 2147483647) UNITS "mA" .1.3.6.1.4.1.2011.5.14.6.5.1.12 |
hwOpticsCurrentUpperThresholdValueOptical current upper limit threshold value.
Unit: mArw Integer32 (0..10000 | 2147483647) UNITS "mA" .1.3.6.1.4.1.2011.5.14.6.5.1.13 |
hwOpticsCurrentThresholdSwitchOptical current threshold value Switch.
Options:
1. on(1) -set optical current threshold value
2. off(2) -clear optical current threshold value
3. invalid(-1) -invalid value
Default: off(2)rw Enumeration .1.3.6.1.4.1.2011.5.14.6.5.1.14 |
hwOpticsModuleTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.14.6.6 |
hwOpticsCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.14.6.6.1 |
hwOpticsCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.14.6.6.1.0 |
hwOpticsAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.14.6.6.2 |
hwOpticsAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.14.6.6.2.0 |
hwOpticsTransceiverFaultyAlarmTrapThis trap will send when the optical transceiver is faulty. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.14.6.6.2.0.1 |
hwOpticsPowerOutOfRangeAlarmTrapThis trap will send when the Tx power of the Ethernet optical port is out of the range. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.14.6.6.2.0.2 |
hwOpticsPortTemperatureHighAlarmTrapThis trap will send when the temperature of the Ethernet optical port is too high. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.14.6.6.2.0.3 |
hwOpticsSmartSFPExtModuleInformationTableIndicates the extended information table of a smart SFP optical module.
It is used for querying the extend information about a smart SFP optical module and setting loopback of a smart SFP optical module.
This operation can be performed on both local and remote optical modules.
When this operation is performed on a remote optical module, the hwOpticsSmartSFPExtModuleInfoRemote leaf is required.
The index of this table is ifIndex. SEQUENCE OF HwOpticsSmartSFPExtModuleInformationEntry .1.3.6.1.4.1.2011.5.14.6.7 |
hwOpticsSmartSFPExtModuleInformationEntryIndicates the extended information table of a smart SFP optical module.
It is used for querying the extend information about a smart SFP optical module and setting loopback of a smart SFP optical module.
This operation can be performed on both local and remote optical modules.
When this operation is performed on a remote optical module, the hwOpticsSmartSFPExtModuleInfoRemote leaf is required.
The index of this entry is ifIndex. HwOpticsSmartSFPExtModuleInformationEntry .1.3.6.1.4.1.2011.5.14.6.7.1 |
hwOpticsSmartSFPIdentifierIndicates the type of a smart SFP optical module.
Options:
1. smartSFPI(1) -The optical module is a smart SFP I optical module
2. smartSFPII(2) -The optical module is a smart SFP II optical module
3. unknowType(3) -Unknown or unspecified typero Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.1 |
hwOpticsSmartSFPProtocolVersionIndicates the protocol version of a smart SFP optical module.
Range: -1, 0C255.
-1 is the invalid value.ro Integer32 (-1 | 0..255) .1.3.6.1.4.1.2011.5.14.6.7.1.2 |
hwOpticsSmartSFPSSFPEnhancedOptionIndicates the enhanced options of a smart SFP optical module.
Range: -1, 0C65535.
-1 is the invalid value.ro Integer32 (-1 | 0..65535) .1.3.6.1.4.1.2011.5.14.6.7.1.3 |
hwOpticsSmartSFPPasswordIndicates the password of a smart SFP optical module.ro Unsigned32 .1.3.6.1.4.1.2011.5.14.6.7.1.4 |
hwOpticsSmartSFPRemoteControllableIndicates whether the remote smart SFP optical module can control the local optical module.
Options:
1. disable(1) -disable, control command from remote optical module will be ignored
2. enable(2) -enable
3. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.5 |
hwOpticsSmartSFPSubCarrierControlIndicates sub-carrier control of a smart SFP optical module, that is,
whether the local smart SFP optical module can send signals to the remote optical module.
Options:
1. disable(1) -disable
2. enable(2) -enable
3. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.6 |
hwOpticsSmartSFPSubCarrierlinkStatusIndicates the sub-carrier status of a smart SFP optical module.
Options:
1. down(1) -linked down
2. rxUp(2) -linked up in RX only
3. up(3) -linked up in both RX and TX direction
4. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.7 |
hwOpticsSmartSFPLocalLoopbackIndicates the loopback control of a local smart SFP optical module.
Options:
1. noloop(1) -no loop
2. remote(2) -local outward loop back
3. local(3) -local inward loop back
4. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.8 |
hwOpticsSmartSFPRemoteLoopbackIndicates the loopback control of a remote smart SFP optical module.
Options:
1. noloop(1) -no loop
2. remote(2) -remote outward loop back
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.9 |
hwOpticsSmartSFPDyingGaspStatusIndicates the dying-gasp status of a remote smart SFP optical module.
Options:
1. poweron(1) -remote normal power
2. poweroff(2) -remote Dying-Gasp asserted
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.10 |
hwOpticsSmartSFPLocalRXOutputControlIndicates the local output control of a smart SFP optical module.
Options:
1. disable(1) -disable
2. enable(2) -enable
3. disableRxLos(3) -disable when LOS asserted
4. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.11 |
hwOpticsSmartSFPPilottoneControlIndicates control of outputting attenuation signals by a smart SFP optical module.
Options:
1. disable(1) -disable
2. enable(2) -enable
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.12 |
hwOpticsSmartSFPPilottoneStatusIndicates the carrier loopback detection status of a smart SFP optical module.
Options:
1. noSignal(1) -no signal
2. toneDetected(2) -tone detected
3. invalid(-1) -invalid valuerw Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.13 |
hwOpticsSmartSFPLoopbackdevicelossIndicates the optical attenuation of a remote loopback device.
Range: -1, 0C25500.
-1 is the invalid value.
Unit: 0.01dbro Integer32 (-1 | 0..25500) UNITS "0.01db" .1.3.6.1.4.1.2011.5.14.6.7.1.14 |
hwOpticsSmartSFPRoundtripfiberlossIndicates the optical attenuation of an optical path.
Range: -1, 0C25500.
-1 is the invalid value.
Unit: 0.01dbro Integer32 (-1 | 0..25500) UNITS "0.01db" .1.3.6.1.4.1.2011.5.14.6.7.1.15 |
hwOpticsSmartSFPExtModuleInfoRemoteIndicates the operation is performed on a remote optical module.
Options:
1. remote(1) -the operation is performed on a remote optical module
2. invalid(-1) -invalid valuero Enumeration .1.3.6.1.4.1.2011.5.14.6.7.1.16 |
hwOpticsSmartSFPConfigTableIndicates the configured parameter table of a smart SFP optical module.
It is used for querying and setting the configured parameters of a smart SFP optical module.
This table supports only the smart SFP 2 optical module.
The index of this table is ifIndex. SEQUENCE OF HwOpticsSmartSFPConfigEntry .1.3.6.1.4.1.2011.5.14.6.8 |
hwOpticsSmartSFPConfigEntryIndicates the configured parameter table of a smart SFP optical module.
It is used for querying and setting the configured parameters of a smart SFP optical module.
This table supports only the smart SFP 2 optical module.
The index of this entry is ifIndex. HwOpticsSmartSFPConfigEntry .1.3.6.1.4.1.2011.5.14.6.8.1 |
hwOpticsSmartSFPIILoopOpticlossIndicates the optical attenuation of a remote loopback device.
Unit: 0.01db.
Range: -1, 0C25500.
-1 is the invalid value.
Default: 14000.rw Integer32 (-1 | 0..25500) UNITS "0.01db" .1.3.6.1.4.1.2011.5.14.6.8.1.1 |