HUAWEI-ENT-VOICE-PUBLIC-MIB
The HUAWEI-ENT-VOICE-PUBLIC-MIB enables monitoring and management of voice service parameters, call session states, and signaling metrics on Huawei enterprise voice gateways and IP-PBX systems. This module facilitates the collection of critical performance data such as active call counts, call setup failures, and voice interface statistics via SNMP for network operations and troubleshooting.
Imported Objects
Objects
61 total| Object Name |
|---|
hwEntVoicePublicMIBHuawei VOICE PUBLIC mib. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.249 |
hwEntSysParaConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.249.1 |
hwEntSysParaCountrySystem parameter of country.
Options:
chinaMainland(1) - China mainland
chinaHongkong(2) - China Hongkong
brazil(3) - Brazil
egypt(4) - Egypt
singapore(5) - Singapore
thailand(6) - Thailand
france(7) - France
britainMsfuk(8) - Britain msfuk
britainEtsi(9) - Britain etsi
bulgaria(10) - Bulgaria
Default: chinaMainland(1)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.1 |
hwEntSysParaStopInitialRingSystem parameter of stop initial ring switch.
Options:
enable(1) - enable
disable(2) - disable
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.2 |
hwEntSysParaMwiModeSystem parameter of mwi mode.
Options:
highVoltage(1) - high voltage
fskWithRing(2) - fsk with ring
fskWithoutRing(3) - fsk without ring
Default: fskWithRing(2)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.3 |
hwEntSysParaFlashHookUpperSystem parameter of hooking upper threshold. (Unit: ms)
Default: 350rw Integer32 .1.3.6.1.4.1.2011.5.25.249.1.4 |
hwEntSysParaFlashHookLowerSystem parameter of hooking lower threshold. (Unit: ms)
Default: 100rw Integer32 .1.3.6.1.4.1.2011.5.25.249.1.5 |
hwEntSysParaParkFeedSystem parameter of park feed switch.
Options:
enable(1) - enable
disable(2) - disable
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.6 |
hwEntSysParaPcmSystem parameter of PCM.
Options:
aLaw(1) - a law
uLaw(2) - u law
Default: aLaw(1)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.7 |
hwEntSysParaRingFrequencySystem parameter of ring frequency.
Options:
frequency16HZ(1) - 16HZ
frequency25HZ(2) - 25HZ
frequency50HZ(3) - 50HZ
Default: frequency25HZ(2)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.8 |
hwEntSysParaRingAcAmplitudeSystem parameter of ring ac-amplitude.
Options:
ac65Vrms(1) - 65Vrms
ac50Vrms(2) - 50Vrms
Default: ac50Vrms(2)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.9 |
hwEntSysParaGlobalDigitmapSystem parameter of global digitmap.
Options:
enable(1) - enable
disable(2) - disable
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.10 |
hwEntSysParaSctpSendChecksumSystem parameter of sctp send checksum.
Options:
enable(1) - enable
disable(2) - disable
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.11 |
hwEntSysParaSctpReceiveChecksumSystem parameter of sctp receive checksum.
Options:
enable(1) - enable
disable(2) - disable
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.5.25.249.1.12 |
hwEntVoipAddressTableVOIP multiply IP table.
The index of this table is hwEntVoipAddressIndex SEQUENCE OF HwEntVoipAddressEntry .1.3.6.1.4.1.2011.5.25.249.2 |
hwEntVoipAddressEntryVOIP multiply IP table.
The index of this entry is hwEntVoipAddressIndex HwEntVoipAddressEntry .1.3.6.1.4.1.2011.5.25.249.2.1 |
hwEntVoipAddressIndexThe index of VOIP address Integer32 .1.3.6.1.4.1.2011.5.25.249.2.1.1 |
hwEntVoipAddressTypeThe type of VOIP address.
Options:
signalling(1) - indicates that the type of VOIP IP is signaling.
media(2) - indicates that the type of VOIP IP is media.rw Enumeration .1.3.6.1.4.1.2011.5.25.249.2.1.2 |
hwEntVoipInterfaceTypeThe interface type of VOIP address.rw DisplayString .1.3.6.1.4.1.2011.5.25.249.2.1.3 |
hwEntVoipInterfaceIdThe interface ID of VOIP address.rw DisplayString .1.3.6.1.4.1.2011.5.25.249.2.1.4 |
hwEntVoipMethodStatic IP address or dynamic IP address name.
Options:
static(1) - the IP address is configured statically.
dynamic(2) - the IP address is obtained dynamically.rw Enumeration .1.3.6.1.4.1.2011.5.25.249.2.1.5 |
hwEntVoipIPAddressIP address.rw IpAddress .1.3.6.1.4.1.2011.5.25.249.2.1.6 |
hwEntVoipAddressRowStatusIndicates the status of this conceptual row.
Options:
active(1)
createAndGo(4)
destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.249.2.1.7 |
hwEntPbxStateTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.249.3 |
hwEntPbxStatePotsUserNumIndicates the number of pots users.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.1 |
hwEntPbxStateBraUserNumIndicates the number of bra users.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.2 |
hwEntPbxStateSipueUserNumIndicates the number of sipue users.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.3 |
hwEntPbxAt0TrkNumIndicates the number of at0 trunk.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.4 |
hwEntPbxPraTrkNumIndicates the number of pra trunk.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.5 |
hwEntPbxR2TrkNumIndicates the number of r2 trunk.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.6 |
hwEntPbxSipat0TrkNumIndicates the number of sipat0 trunk.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.7 |
hwEntPbxSipTrkGrpNumIndicates the number of sip trunk group.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.8 |
hwEntPbxStateOnlineUserNumIndicates the number of online users.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.9 |
hwEntPbxStateMaxCallNumIndicates the max number of calls.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.3.10 |
hwEntSipagStateTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.249.4 |
hwEntSipagStatePotsUserNumIndicates the number of pots ports.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.4.1 |
hwEntSipagStateBraUserNumIndicates the number of bra users.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.4.2 |
hwEntSipagStatePraUserNumIndicates the number of pra users.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.4.3 |
hwEntSipagStateSipagNumIndicates the number of sipag.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.4.4 |
hwEntSipagStateOnlineNumIndicates the number of online users.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.4.5 |
hwEntSipagStateMaxCallNumIndicates the max number of calls.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.4.6 |
hwEntSipagStateBestFlagIndicates the best flag.ro Enumeration .1.3.6.1.4.1.2011.5.25.249.4.7 |
hwEntCallStaticsTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.249.5 |
hwEntCallStaticsAttemptCallIndicates the attempt call number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.5.1 |
hwEntCallStaticsAlertingCallIndicates the alerting call number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.5.2 |
hwEntCallStaticsAnswerCallIndicates the answer call number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.5.3 |
hwEntCallStaticTotalCallTimeIndicates the total call timer.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.5.4 |
hwEntPbxTrunkCallStaticsTableIndicates the trunk call statics SEQUENCE OF HwEntPbxTrunkCallStaticsEntry .1.3.6.1.4.1.2011.5.25.249.6 |
hwEntPbxTrunkCallStaticsEntryIndicates the trunk call statics HwEntPbxTrunkCallStaticsEntry .1.3.6.1.4.1.2011.5.25.249.6.1 |
hwEntPbxTrunkCallStaticsTrkGrpNameIndicates the trunk group name. DisplayString .1.3.6.1.4.1.2011.5.25.249.6.1.1 |
hwEntPbxTrunkCallStaticsCallTypeIndicates the call type. Enumeration .1.3.6.1.4.1.2011.5.25.249.6.1.2 |
hwEntPbxTrunkCallStaticsTrkGrpTypeIndicates the trunk type.ro Enumeration .1.3.6.1.4.1.2011.5.25.249.6.1.3 |
hwEntPbxTrunkCallStaticsAttemptCallIndicates the attempt call number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.6.1.4 |
hwEntPbxTrunkCallStaticsAlertingCallIndicates the aletring call number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.6.1.5 |
hwEntPbxTrunkCallStaticsAnswerCallIndicates the answer call number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.6.1.6 |
hwEntPbxTrunkCallStaticsTotalCallTimeIndicates the total call time.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.6.1.7 |
hwEntPbxTrunkCallStaticsTrunkNumIndicates the trunk number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.6.1.8 |
hwEntPbxTrunkCallStaticsTrunkOccupyPerIndicates the busy trunk number.ro Integer32 .1.3.6.1.4.1.2011.5.25.249.6.1.9 |
hwEntVoicePublicConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.249.7 |
hwEntVoicePublicCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.249.7.1 |
hwEntVoicePublicGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.249.7.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.