HUAWEI-E-TRUNK-MIB
AI MIB Summary
The HUAWEI-E-TRUNK-MIB enables monitoring and management of Huawei E-Trunk (Ethernet Trunk) interfaces, specifically tracking the operational status, state transitions, and synchronization metrics of dual-active prevention (DADP) sessions across aggregated uplinks. This module provides visibility into the failover state, peer link health, and VRRP/HSRP synchronization counters essential for maintaining high availability in multi-chassis link aggregation deployments.
The HUAWEI-E-TRUNK-MIB.mib provides information about E-Trunk.
Main OID:
hwETrunkMIB.1.3.6.1.4.1.2011.5.25.178
56
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
hwDatacomm OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25 |
hwETrunkMIBThe HUAWEI-E-TRUNK-MIB.mib provides information about E-Trunk. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.178 |
hwETrunkObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.178.1 |
hwETrunkTableThe E-Trunk table. SEQUENCE OF HwETrunkEntry .1.3.6.1.4.1.2011.5.25.178.1.1 |
hwETrunkEntryE-Trunk entry. HwETrunkEntry .1.3.6.1.4.1.2011.5.25.178.1.1.1 |
hwETrunkIdThe index of the E-Trunk. Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.1 |
hwETrunkSystemIdThe system ID of the E-Trunk. It is a physical address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.178.1.1.1.2 |
hwETrunkPriThe priority of the E-Trunk. The default value is 100.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.3 |
hwETrunkStatusThe status of the E-Trunk.
1:initialize.
2:backup.
3:master.ro Enumeration .1.3.6.1.4.1.2011.5.25.178.1.1.1.4 |
hwETrunkStatusReasonThe reason for the E-Trunk being in the current status.
pri(1):Priority calculation.
timeout(2):The receiving timer timed out.
bfdDown(3):BFD detected the control link between the PE and peer down.
peerTimeout(4):The receiving timer of the peer timed out.
peerBfdDown(5):BFD of the peer detected the control link between the PE and peer down.
allMemberDown(6):All members of the E-Trunk were down.
init(7):Initiated the E-Trunk.
peerNodeDown(8):The peer node is down.ro Enumeration .1.3.6.1.4.1.2011.5.25.178.1.1.1.5 |
hwETrunkPeerIpAddrThe peer IP address of the E-Trunk.rw IpAddress .1.3.6.1.4.1.2011.5.25.178.1.1.1.6 |
hwETrunkSourceIpAddrThe source IP address of the E-Trunk.rw IpAddress .1.3.6.1.4.1.2011.5.25.178.1.1.1.7 |
hwETrunkReceiveFailTimeMultipleThe detection time multiplier for failure detection. It is the multiple of the sending period.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.8 |
hwETrunkSendPeriodThe period for sending packets of the E-Trunk. The unit is 100ms.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.9 |
hwETrunkPacketReceiveThe number of received packets.ro Counter64 .1.3.6.1.4.1.2011.5.25.178.1.1.1.10 |
hwETrunkPacketSendThe number of sent packets.ro Counter64 .1.3.6.1.4.1.2011.5.25.178.1.1.1.11 |
hwETrunkPacketRecDropThe number of the dropped packets when the packets are received.ro Counter64 .1.3.6.1.4.1.2011.5.25.178.1.1.1.12 |
hwETrunkPacketSndDropThe number of the dropped packets when the packets are sent.ro Counter64 .1.3.6.1.4.1.2011.5.25.178.1.1.1.13 |
hwETrunkPeerSystemIdThe system ID of the peer E-Trunk. It is a physical address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.178.1.1.1.14 |
hwETrunkPeerPriThe priority of the peer E-Trunk.ro Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.15 |
hwETrunkPeerReceiveFailTimeThe failure time for the peer E-Trunk to receive packets. The unit is 100ms.ro Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.16 |
hwETrunkSecurityKeyTypeThe type of the security key.
1:The simple encrypt type.
2:The cipher encrypt type.rw Enumeration .1.3.6.1.4.1.2011.5.25.178.1.1.1.17 |
hwETrunkSecurityKeyThis object can be set to a simple password with a string of 0 to 255 characters or a encrypted password with a string less than 392 characters. For security purposes, a get on this returns a zero length string.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.178.1.1.1.18 |
hwETrunkBfdSessIdThe ID of a BFD session which is bound to the E-Trunk.
When the status of the BFD session is changed, the status of the E-Trunk is also changed with BFD's status.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.19 |
hwETrunkResetCounterReset hwETrunkPacketReceive,hwETrunkPacketSend,hwETrunkPacketRecDrop,hwETrunkPacketSndDrop.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.20 |
hwETrunkRevertTimeThe delay time to revert. The unit is second. The default is 120.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.21 |
hwETrunkBfdSessNameThe name of a BFD session which is bound to the E-Trunk.
And BFD session name is composed of octet string which is 1 to 15 octet and can't contain space within it.
When the status of the BFD session is changed, the status of the E-Trunk is also changed with BFD's status.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.178.1.1.1.22 |
hwETrunkDescriptionThe description of the E-Trunk. The default is NULLrw OCTET STRING .1.3.6.1.4.1.2011.5.25.178.1.1.1.23 |
hwETrunkAutoBFDEnableThe object indicates whether the E-trunk enable auto BFD function.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.178.1.1.1.24 |
hwETrunkAutoBFDTrackIfIndexThe object indicates the index of an interface which is tracked by the E-Trunk auto BFD session.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.25 |
hwETrunkAutoBFDTxIntervalThe sending interval of E-Trunk auto BFD session in milliseconds. The default is 10.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.26 |
hwETrunkAutoBFDRxIntervalThe receiving interval of E-Trunk auto BFD session in milliseconds. The default is 10.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.27 |
hwETrunkAutoBFDDetectMultiplierThe detect multiplier of E-Trunk auto BFD session. The default is 3.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.1.1.28 |
hwETrunkRowStatusCurrent operation status of the row. It is used to manage the creation and deletion of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.178.1.1.1.50 |
hwETrunkMemberTableThe member table of the E-Trunk. SEQUENCE OF HwETrunkMemberEntry .1.3.6.1.4.1.2011.5.25.178.1.2 |
hwETrunkMemberEntryMember Entry. HwETrunkMemberEntry .1.3.6.1.4.1.2011.5.25.178.1.2.1 |
hwETrunkMemberParentIdThe ID of the E-Trunk to which the member belongs. Integer32 .1.3.6.1.4.1.2011.5.25.178.1.2.1.1 |
hwETrunkMemberTypeThe type of the member. Now it is Eth-Trunk and Global-VE.
1:Eth-Trunk.
2:Global-VE. Integer32 .1.3.6.1.4.1.2011.5.25.178.1.2.1.2 |
hwETrunkMemberIdThe ID of the member. Unsigned32 .1.3.6.1.4.1.2011.5.25.178.1.2.1.3 |
hwETrunkMemberStatusThe member status.
1:backup.
2:master.ro Enumeration .1.3.6.1.4.1.2011.5.25.178.1.2.1.4 |
hwETrunkMemberStatusReasonThe reason for the member being in the current status.
forceBackup(1):The work mode of the member is force-backup.
forceMaster(2):The work mode of the member is force-master.
etrunkInit(3):The work mode of the member is auto. The status of E-Trunk is initialize.
etrunkBackup(4):The work mode of the member is auto. The status of E-Trunk is backup.
etrunkMaster(5):The work mode of the member is auto. The status of E-Trunk is master.
peerMemberDown(6):The status of the member belonging to the peer E-Trunk is down.
peerMemberUp(7):The status of the member belonging to the peer E-Trunk is up.
activeActive(8):The status of the trill active-active is ok.
degradedActive(9):The status of the trill active-active is fail, but the status of the peerlink is up.
peerLinkDown(10):The status of the trill active-active is fail, and the status of the peerlink is down.
linkDown(11):The status of the E-Trunk member is down.
allActive(12):The E-Trunk member is bound to an EVPN instance, and the redundancy mode is all-active.ro Enumeration .1.3.6.1.4.1.2011.5.25.178.1.2.1.5 |
hwETrunkMemberWorkModeThe work mode of the member.
1:auto.
2:forceBackup.
3:forceMaster.
4:activeActive.rw Enumeration .1.3.6.1.4.1.2011.5.25.178.1.2.1.6 |
hwETrunkMemberPhyStatusThe physical status of the member.
1:up.
2:down.ro Enumeration .1.3.6.1.4.1.2011.5.25.178.1.2.1.7 |
hwETrunkMemberRemoteIdIndicates the ID of a remote E-Trunk member. By default, the ID of a remote E-Trunk member is the same as the ID of the local E-Trunk member. When both ends have E-Trunk member with different IDs, you need to specify the ID of a remote E-Trunk member.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.178.1.2.1.8 |
hwETrunkMemberRowStatusCurrent operation status of the row. It is used to manage the creation and deletion of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.178.1.2.1.50 |
hwETrunkBackupPortTableThe backup port table of the E-Trunk. SEQUENCE OF HwETrunkBackupPortEntry .1.3.6.1.4.1.2011.5.25.178.1.3 |
hwETrunkBackupPortEntryBackup Port Entry. HwETrunkBackupPortEntry .1.3.6.1.4.1.2011.5.25.178.1.3.1 |
hwETrunkBackupETrunkIdThe index of the E-Trunk. Integer32 .1.3.6.1.4.1.2011.5.25.178.1.3.1.1 |
hwETrunkBackupPortNumThe backup port number of the E-Trunk for RBS.rw Integer32 .1.3.6.1.4.1.2011.5.25.178.1.3.1.2 |
hwETrunkBackupPortRowStatusCurrent operation status of the row. It is used to manage the creation and deletion of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.178.1.3.1.3 |
hwETrunkTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.178.2 |
hwETrunkStatusChangeThe trap is generated when the status of the E-Trunk is changed or the status reason of the E-Trunk is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.178.2.1 |
hwETrunkMemberStatusChangeThe trap is generated when the status of the memeber is changed or the status reason of the memeber is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.178.2.2 |
hwETrunkConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.178.3 |
hwETrunkCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.178.3.1 |
hwETrunkGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.178.3.2 |