HUAWEI-DSLAM-NTV-MIB
AI MIB Summary
The HUAWEI-DSLAM-NTV-MIB module provides management objects for monitoring and controlling IP multicast sessions on Huawei DSLAM access devices, specifically enabling the enforcement of user authorization policies to filter and forward multicast traffic streams.
This MIB module defines the Multicast MIB objects. Multicast refers to the point-to-multipoint communication in which the multicast source sends the information to a certain subset of all the network nodes. Controllable multicast allows an access device to determine if a user has the authority to watch programs by identifying the user request packets. In this way, the access device controls and forwards the multicast services.
Main OID:
hwDslamNtv.1.3.6.1.4.1.2011.6.28
676
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
676 total| Object Name |
|---|
hwDslamNtvThis MIB module defines the Multicast MIB objects.
Multicast refers to the point-to-multipoint communication in which the multicast
source sends the information to a certain subset of all the network nodes.
Controllable multicast allows an access device to determine
if a user has the authority to watch programs by identifying the user request packets.
In this way, the access device controls and forwards the multicast services. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.28 |
hwDslamNtvModeIndicates the IGMP mode. Currently, four modes in enumerated values are supported:
Options:
1. hmcp(1) -indicates the IGMP mode is hmcp
2. igmpSnooping(2) -indicates the IGMP mode is snooping
3. igmpProxy(3) -indicates the IGMP mode is proxy
4. tvOff(4) -indicates the IGMP mode is off
5. oamGroupControl(5) -indicates the IGMP mode is oamGroupControl
This leaf is valid in only the IGMP global mode. Default: tvOff(4).rw Enumeration .1.3.6.1.4.1.2011.6.28.1 |
hwDslamNtvVpiMulticast vpi.
System multicast vpi. Value ranges from 0 to 255.If it is changed,
all the vpi of multicast pvcs are changed.
Default: 0rw Integer32 .1.3.6.1.4.1.2011.6.28.2 |
hwDslamNtvVciMulticast vci.
System multicast vci. Value from 0 to 65535.If it is changed,all the vci of multicast pvc are changed.
Default: 35rw Integer32 .1.3.6.1.4.1.2011.6.28.3 |
hwDslamNtvQueryIntervalSets/Queries the interval of an IGMP general group.
Range: 30-5000
Unit: second
Default: 125rw Unsigned32 .1.3.6.1.4.1.2011.6.28.4 |
hwDslamNtvQuerierIndicates the source IP address of IGMP packets sent to the user side.
Default: 192.168.1.1rw IpAddress .1.3.6.1.4.1.2011.6.28.5 |
hwDslamNtvQueryMaxResponseTimeIndicates the maximum response time for an IGMPV2 general query.
Range: 1-255
Unit: 0.1s, that is, 0.1-25.5s.
Default: 10s (100)rw Integer32 .1.3.6.1.4.1.2011.6.28.6 |
hwDslamNtvLeaveDelayLeave delay.
UNIT: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.7 |
hwDslamNtvMaxChannelNumIndicates the maximum number of programs supported by the system.ro Integer32 .1.3.6.1.4.1.2011.6.28.8 |
hwDslamNtvSnoopingAdminStatusSnooping administer state.
The administrative true(enable)/ false(disable) state for IGMP Snooping.
used to enable/disable IGMP Snooping to control whether MAC multicast
forwarding table is created and maintained on Layer 2.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.9 |
hwDslamNtvLastChangeNTV feature configure state.
The value of sysUpTime at the time when the system entered its current operational state.
If the current state was entered prior to the last re-initialization of the local
network management subsystem, then this object contains a zero value.
Options:
1. changed(1) -indicates the NTV feature configure has changed
2. unchanged(2) -indicates the NTV feature configure has not changedro Enumeration .1.3.6.1.4.1.2011.6.28.10 |
hwDslamNtvUpportInterfaceifIndex of Main Up Port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.6.28.11 |
hwDslamNtvUpportVlanIdVlanId of Main Up Port.rw Integer32 .1.3.6.1.4.1.2011.6.28.12 |
hwDslamNtvRobustnessIndicates the system robustness variable.
Range: 1-10
Default: 2rw Integer32 .1.3.6.1.4.1.2011.6.28.13 |
hwDslamNtvUserTableIndicates the multicast user table.
The index of this table is hwDslamNtvUserIndex. SEQUENCE OF HwDslamNtvUserEntry .1.3.6.1.4.1.2011.6.28.16 |
hwDslamNtvUserEntryIndicates the multicast user table.
The index of this entry is hwDslamNtvUserIndex. HwDslamNtvUserEntry .1.3.6.1.4.1.2011.6.28.16.1 |
hwDslamNtvUserAuthorityIndicates the user authentication attribute.
Options:
1. auth(1) -indicates the user authentication attribute is auth
2. noauth(2) -indicates the user authentication attribute is noauth,
the user has authority to watch all programs.
3. invalid(-1) -indicates the user authentication attribute is invalid
Default: noauth(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.1 |
hwDslamNtvUserRightProfileRight profile.
The index of user right profile.When user select the right profile,
it can watch the program in the right profile only.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.2 |
hwDslamNtvUserRowStatusRow status, used to query, create, modify, and delete a multicast user.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a multicast user, this leaf need not be issued together.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.16.1.3 |
hwDslamNtvUserOperStatusIndicates the current running status of a multicast user. This leaf supports only the query operation.
When hwDslamNtvUserAdminStatus is block(1), this leaf must be block(3); when hwDslamNtvUserAdminStatus
is unblock(2) and a user is watching a program, this leaf is online(1); when hwDslamNtvUserAdminStatus
is unblock(2) and no user is watching programs, this leaf is offline(2). Options of hwDslamNtvUserOperStatus:
Options:
1. online(1) -indicates a user is watching program
2. offline(2) -indicates no user is watching program
3. block(3) -indicates the leaf hwDslamNtvUserAdminStatus is block(1)ro Enumeration .1.3.6.1.4.1.2011.6.28.16.1.4 |
hwDslamNtvUserAdminStatusIndicates the management status of a multicast user. It is used to set whether allow a user to watch programs.
Options:
1. block(1) -indicates a user can watch program
2. unblock(2) -indicates a user can watch program
Default: unblock(2).rw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.5 |
hwDslamNtvUserMaxChannelIndicates the maximum number of concurrent channels that can be watched by a user.
Range: 1-255
Default: 8rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.6 |
hwDslamNtvUserWatchingChannel1User watching channel.
The channels that a user is watching.ro Bits .1.3.6.1.4.1.2011.6.28.16.1.7 |
hwDslamNtvUserWatchingChannel2User watching channel.
The channels that a user is watching.ro Bits .1.3.6.1.4.1.2011.6.28.16.1.8 |
hwDslamNtvUserEnableLogIndicates the log switch. Options:
Options:
1. true(1) -indicates the log switch is on
2. false(2) -indicates the log switch is off
Default: true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.16.1.9 |
hwDslamNtvUserVpiIndicates the VPI of the PVC carrying IGMP packets. This leaf
and the VCI leaf together identify an xDSL user. The value range
is determined by the xDSL line specifications. In a none-ATM type,
the returned value for hwDslamNtvUserVpi is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.10 |
hwDslamNtvUserVciIndicates the VCI of the PVC carrying IGMP packets. This leaf and
the VPI leaf together identify an xDSL user. The value range is
determined by the xDSL line specifications. In a none-ATM type,
the returned value for hwDslamNtvUserVci is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.11 |
hwDslamNtvUserVlanThe VLAN which carries IGMP messages.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.12 |
hwDslamNtvUserFlowTypeIndicates the traffic stream type. If this leaf is not issued, it indicates the single-service traffic.
Options:
1. byUserVlan(1) -indicates the traffic stream type is byUserVlan
2. byEncap(2) -indicates the traffic stream type is byEncap
3. by8021p(3) -indicates the traffic stream type is by8021p
4. byUserVlanEtherType(4) -indicates the traffic stream type is byUserVlanEtherType
5. otherType(255) -indicates the traffic stream type is otherType
6. singleFlow(-1) -indicates the traffic stream type is singleFlowrw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.17 |
hwDslamNtvUserFlowParaSpecifies the parameter value of the flow type. The parameter value varies with the flow type. In detail:
1. If the flow type is byUserVlan (1), the range of this parameter is 1-4095. If the flow type is untagged,
this parameter is -1.
2. If the flow type is byEncap (2), the options of this parameter are ipv4oe(0), ipoe(1), pppoe(2) and ipv6oe(3).
3. If the flow type is by8021p (3), the range of this parameter is 0-7.
4. If the flow type is byUserVlanEtherType(4), the flow parameter is a combination of the EtherType and the user VLAN.
5. If the flow type is otherType(255), the flow parameter is an invalid value, and this parameter is -1.
The EtherType can be ipoe(1) or pppoe(2), and the user VLAN is in the range of 1-4095, 0 (priority-tagged),
and untagged(-1). For the service flow of the byUserVlanEtherType(4) type, this leaf supports only reading,
and does not support creation.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.18 |
hwDslamNtvUserModeThe status of the user port mode.
Options:
1. snooping(0) -indicates the user port mode is snooping
2. discard(1) -indicates the user port mode is discard
3. forwarding(2) -indicates the user port mode is forwardingrw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.19 |
hwDslamNtvUserAuthFailProcessThe process mode for the user when his authorization failed.
Options:
1. discard(0) -indicates process mode is discard
2. forward(1) -indicates process mode is forwardrw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.20 |
hwDslamNtvUserUsedBandwidthIndicates the used bandwidth of a user. When bandwidth management is disabled,
the returned value for hwDslamNtvUserUsedBandwidth is -1.
Unit: kbit/s.ro Integer32 .1.3.6.1.4.1.2011.6.28.16.1.21 |
hwDslamNtvUserUsdBwthPcntToPortRateIndicates the percentage of the used bandwidth to the bandwidth allocated to the igmp user.
When bandwidth management is disabled or the bandwidth is not limited, the returned value
for hwDslamNtvUserUsdBwthPcntToPortRate is -1.ro Integer32 .1.3.6.1.4.1.2011.6.28.16.1.22 |
hwDslamNtvUserIfIndexIndicates the port index, corresponding to the shelf ID and slot ID of the port.
Its value and algorithm are the same as those of ifIndex.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.23 |
hwDslamNtvUserIndexIndicates the unique index of a multicast user.
You can also fill -1 and the system will automatically allocate an index.ro Integer32 .1.3.6.1.4.1.2011.6.28.16.1.24 |
hwDslamNtvUserMatchParaSupported by only GPON and EPON. For an EPON port or a GPON port in the profile mode,
it indicates ontid; for a GPON port in the non-profile mode, it indicates gemportid.
The range is determined by the line specifications. In a none-xPON type, the returned
value for hwDslamNtvUserMatchPara is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.25 |
hwDslamNtvUserMaxBandWidthIndicates the maximum multicast bandwidth.
Range: 0-4294967295
Unit: kbit/s
Default: noLimit(4294967295)rw Unsigned32 .1.3.6.1.4.1.2011.6.28.16.1.26 |
hwDslamNtvUserQuickLeaveTimeThe aging time of user in quick leave.
UNIT: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.30 |
hwDslamNtvUserVideoVpiIndicates the VPI of the traffic stream carrying the multicast video service.
The range is determined by the xDSL line specifications. In a none-ATM type,
the returned value for hwDslamNtvUserVideoVpi is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.31 |
hwDslamNtvUserVideoVciIndicates the VCI of the traffic stream carrying the multicast video service.
The range is determined by the xDSL line specifications. In a none-ATM type,
the returned value for hwDslamNtvUserVideoVci is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.32 |
hwDslamNtvUserVideoFlowTypeIndicates the flow type of the multicast video stream.
If this leaf is not issued, it indicates the single-service traffic.
Options:
1. byUserVlan(1) -indicates the flow type of the multicast video stream is byUserVlan
2. byEncap(2) -indicates the flow type of the multicast video stream is byEncap
3. by8021p(3) -indicates the flow type of the multicast video stream is by8021p
4. byUserVlanEtherType(4) -indicates the flow type of the multicast video stream is byUserVlanEtherType
5. invalid(-1) -indicates the flow type of the multicast video stream is invalidrw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.33 |
hwDslamNtvUserVideoFlowParaSpecifies the parameter value of the flow carrying the multicast video service.
The parameter value varies with the flow type. In detail:
1. If the flow type is byUserVlan (1), the range of this parameter is 1-4095.
If the flow type is untagged, this parameter is -1.
2. If the flow type is byEncap (2), the options of this parameter are ipv4oe(0), ipoe(1), pppoe(2) and ipv6oe(3).
3. If the flow type is by8021p (3), the range of this parameter is 0-7.
4. If the flow type is byUserVlanEtherType(4), the flow parameter is a combination
of the EtherType and the user VLAN. The EtherType can be ipoe(1) or pppoe(2),
and the user VLAN is in the range of 1-4095, 0 (priority-tagged), and untagged(-1).
For the service flow of the byUserVlanEtherType(4) type, this leaf supports only reading,
and does not support creation.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.34 |
hwDslamNtvUserQuickLeaveModeIndicates the quick leave attribute of a user. Options:
1. immediate(1) -indicates the quick leave attribute of a user is immediate
2. macBased(2) -indicates the quick leave attribute of a user is macBased
3. disable(3) -indicates the quick leave attribute of a user is disable
In the OAM dynamic mode, the default value is disable(3); in other modes,
the default value is macBased(2).rw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.35 |
hwDslamNtvReceiveGlobalLeaveIndicates the switch of whether to receive the global leave packet sent from the user side.
Options:
1. enable(1) -indicates receive the global leave packet sent from the user side
2. disable(2) -indicates not receive the global leave packet sent from the user side
Default: disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.36 |
hwDslamNtvUserFlowModeIndicates the xDSL mode. The traffic stream on a non-xDSL board need not be issued with this leaf.
Options:
1. ptm(1) -indicates the xDSL mode is ptm
2. atm(2) -indicates the xDSL mode is atm
3. invalid(-1) -indicates invalid xDSL moderw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.37 |
hwDslamNtvUserFlowIDIndicates the ID of the flow carrying the user IGMP protocol.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.38 |
hwDslamNtvUserVideoFlowIDIndicates the ID of the flow carrying the multicast video service.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.39 |
hwDslamNtvUserVideoTagModeIndicates the video tag mode.
Options:
1. untagged(1) -indicates the video tag mode is untagged
2. mvlan(2) -indicates the video tag mode is mvlan
3. vlan(3) -indicates the video tag mode is vlan
4. withProgramVlan(4) -indicates the video tag mode is withProgramVlan
5. invalid(-1) -indicates the video tag mode is invalidrw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.40 |
hwDslamNtvUserVideoTagParaIndicates video tag parameter.rw Integer32 .1.3.6.1.4.1.2011.6.28.16.1.41 |
hwDslamNtvUserAncpVideoBandwidthIndicates the total video bandwidth allocated by the ANCP server.
When ANCP CAC is disabled or the board does not support ANCP CAC,
the returned value for hwDslamNtvUserAncpVideoBandwidth is -1.
Unit: kbit/s.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.2011.6.28.16.1.42 |
hwDslamNtvUserAncpMcastBandwidthIndicates the multicast bandwidth allocated by the ANCP server.
When ANCP CAC is disabled or the board does not support ANCP CAC,
the returned value for hwDslamNtvUserAncpMcastBandwidth is -1.
Unit: kbit/s.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.2011.6.28.16.1.43 |
hwDslamNtvUserMatchPara2Indicates the gemindex of a GPON port in the profile mode of a GPON board.
This leaf need not be issued for a non-GPON board or in the GPON non-profile mode.
When the GPON mode is profile mode and the service board is a GPON board, the returned
value for hwDslamNtvUserMatchPara2 is gemindex. Otherwise, the returned value is -1.ro Integer32 .1.3.6.1.4.1.2011.6.28.16.1.44 |
hwDslamNtvUserIgmpVersionIndicates the querier IGMP version of user .
Options:
1. v2(1) -indicates the querier IGMP version of user is v2.
2. v3(2) -indicates the querier IGMP version of user is v3.
3. v3Forced(3) -indicates the querier IGMP version of user is v3Forced, which forced the query message version is v3.rw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.45 |
hwDslamNtvUserCurrentMldVersionIndicates the querier MLD version of user .
Options:
1. v1(1) -indicates the current MLD version of user is v1.
2. v2(2) -indicates the current MLD version of user is v2.
3. invalid(-1) -indicates the current MLD version of user is invalid.ro Enumeration .1.3.6.1.4.1.2011.6.28.16.1.46 |
hwDslamNtvUserMldQueryVersionIndicates the querier MLD version of user .
Options:
1. v2(1) -indicates the querier MLD version of user is v2.
2. v2Special(2) -indicates a version of query packet is determined by the version of the host.
3. invalid(-1) -indicates the querier MLD version of user is invalid.rw Enumeration .1.3.6.1.4.1.2011.6.28.16.1.47 |
hwDslamNtvChannelTableChannel management table.
The index of this table is hwDslamNtvChannelIndex. SEQUENCE OF HwDslamNtvChannelEntry .1.3.6.1.4.1.2011.6.28.17 |
hwDslamNtvChannelEntryChannel management table.
The index of this entry is hwDslamNtvChannelIndex. HwDslamNtvChannelEntry .1.3.6.1.4.1.2011.6.28.17.1 |
hwDslamNtvChannelIndexChannel index.ro Integer32 .1.3.6.1.4.1.2011.6.28.17.1.1 |
hwDslamNtvChannelFrameChannel frame.
The frame ID of channel that indicates which frame the channel is on.rw Integer32 .1.3.6.1.4.1.2011.6.28.17.1.2 |
hwDslamNtvChannelSlotChannel slot.
The slot ID of channel that indicates which slot the channel is on.rw Integer32 .1.3.6.1.4.1.2011.6.28.17.1.3 |
hwDslamNtvChannelPortChannel port.
The port ID of channel that indicates which port the channel is on.rw Integer32 .1.3.6.1.4.1.2011.6.28.17.1.4 |
hwDslamNtvProgramIPAddrProgram IP address.
This address is the same as hwDslamNtvProgramIP in hwDslamNtvProgramTable.rw IpAddress .1.3.6.1.4.1.2011.6.28.17.1.5 |
hwDslamNtvChannelTypeChannel type.
Options:
1. contral(1) -indicates the channel type is contral
2. service(2) -indicates the channel type is servicerw Enumeration .1.3.6.1.4.1.2011.6.28.17.1.6 |
hwDslamNtvChannelRowStatusRow status.
Add or delete a table item.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the adding operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.17.1.7 |
hwDslamNtvChannelAttribChannel state.
The state of channel being used.If the user count is 0,t he value of the node is free(1).
If the user count isn't 0, the value of the node is used(2).
Options:
1. free(1) -indicates the channel is not used
2. used(2) -indicates the channel is being usedro Enumeration .1.3.6.1.4.1.2011.6.28.17.1.8 |
hwDslamNtvChannelUserCountUser Count.
Number of the users who are watching the channel.ro Integer32 .1.3.6.1.4.1.2011.6.28.17.1.9 |
hwDslamNtvProgramTableIndicates the multicast program table.
The index of this table is hwDslamNtvProgramIndex. SEQUENCE OF HwDslamNtvProgramEntry .1.3.6.1.4.1.2011.6.28.18 |
hwDslamNtvProgramEntryIndicates the multicast program table.
The index of this entry is hwDslamNtvProgramIndex. HwDslamNtvProgramEntry .1.3.6.1.4.1.2011.6.28.18.1 |
hwDslamNtvProgramIndexIndicates the index of a program.
Range: 1-4096,-1
You can also fill -1 and the system will automatically allocate an index.ro Integer32 (-1|1..4096) .1.3.6.1.4.1.2011.6.28.18.1.1 |
hwDslamNtvProgramIPIndicates the IP address of a program, the multicast address.rw IpAddress .1.3.6.1.4.1.2011.6.28.18.1.2 |
hwDslamNtvProgramRowStatusRow status, used to query, create, modify, and delete a multicast program.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a multicast program, this leaf need not be issued together.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.18.1.3 |
hwDslamNtvProgramNameIndicates the program name. Range: 1-16
It must be printable ASCII characters.
Chinese characters are not supported. The name of a program must be unique.
By default it is program-n. n indicates the index of the program. For example,
the name of a program with the index of 4 is program-4.rw OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.4 |
hwDslamNtvProfileMaskRight profile mask.
Right profile mask of program source. If program is included in the right profile,the mask is 1.
If program isn't included in the right profile,the mask is 0.rw Bits .1.3.6.1.4.1.2011.6.28.18.1.5 |
hwDslamNtvProgramUserCountUser count.
Count of the user which can watch the program.ro Integer32 .1.3.6.1.4.1.2011.6.28.18.1.6 |
hwDslamNtvProgramUpportifIndex of Slave Up Port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.6.28.18.1.7 |
hwDslamNtvProgramUpportVlanIndicates the VLAN where the program resides.rw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.8 |
hwDslamNtvProgramHostFunIndicates the host function of a program.
Options:
1. true(1) -indicates the host function of a program is true
2. false(2) -indicates the host function of a program is false
Default: true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.18.1.9 |
hwDslamNtvProgramPrejoinIndicates the pre-join function of a program.
Options:
1. true(1) -indicates the pre-join function of a program is true
2. false(2) -indicates the pre-join function of a program is false
Default: false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.18.1.10 |
hwDslamNtvProgramWatchingPortList1Port list of slot0 to slot7 who are watching the program.ro PortList .1.3.6.1.4.1.2011.6.28.18.1.11 |
hwDslamNtvProgramWatchingPortList2Port list of slot8 to slot15 who are watching the program.ro PortList .1.3.6.1.4.1.2011.6.28.18.1.12 |
hwDslamNtvProgramSourceIPIndicates the IP address of the program source.rw IpAddress .1.3.6.1.4.1.2011.6.28.18.1.13 |
hwDslamNtvProgramLogAttrIndicates the log attribute of the program, that is, whether to collect the log statistics about the program.
Options:
1. true(1) -indicates to collect the log statistics of the program
2. false(2) -indicates not to collect the log statistics of the program
Default: true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.18.1.14 |
hwDslamNtvProgramAcrossVlanProgram is transferred by across VLAN.
Options:
1. true(1) -indicates the program is transferred across VLAN
2. false(2) -indicates the program is not transferred across VLANrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.18.1.15 |
hwDslamNtvProgramUnsolicitedIndicates the active report attribute of a program.
Options:
1. true(1) -indicates the program can report actively
2. false(2) -indicates the program cannot report actively
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.18.1.16 |
hwDslamNtvProgramBandWidthIndicates the program bandwidth limit.
Default: 5000
Unit: kbit/srw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.17 |
hwDslamNtvProgramWatchingCountIndicates the number of users who are watching a program.ro Integer32 .1.3.6.1.4.1.2011.6.28.18.1.18 |
hwDslamNtvProgramIpCascadePortListIP cascade port list, 16bits. List of the IP cascade port which can watch the program.ro Integer32 .1.3.6.1.4.1.2011.6.28.18.1.19 |
hwDslamNtvProgramPreviewMaxTimeThe max time of per preview.
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.20 |
hwDslamNtvProgramPreviewIntervalThe interval time of preview the same program.
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.21 |
hwDslamNtvProgramPreviewCountThe times of preview.rw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.22 |
hwDslamNtvProgramPriorityIndicates the program priority, Setting priority as -1 is not permitted.
Range: 0-7, -1
Default: 7
0xffffffff(-1): Invalid priorityrw Integer32 (-1|0..7) .1.3.6.1.4.1.2011.6.28.18.1.23 |
hwDslamNtvProgramHostIPIndicates the IP address of the host that requests the program.rw IpAddress .1.3.6.1.4.1.2011.6.28.18.1.24 |
hwDslamNtvProgramLastReporterIPIndicates the IP address of the host that reports the last IGMP report packet.ro IpAddress .1.3.6.1.4.1.2011.6.28.18.1.25 |
hwDslamNtvProgramFoundElapseIndicates the elapse time since the creation of a multicast group, displayed
in ASCII. When it is shorter than a day, its precession is second in the form
of HH:MM:SS. If it is longer than a day, its precision is day, in the form
of n day(s), where, n indicates the number of days.ro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.26 |
hwDslamNtvProgramExpireTimeIndicates the expiration time of the multicast group, displayed in ASCII.
When it is shorter than a day, its precession is second in the form of HH:MM:SS.
If it is longer than a day, its precision is day, in the form of n day(s),
where, n indicates the number of days.ro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.27 |
hwDslamNtvProgramBTVUserPortListIndicates the mask of BTV users that are watching this program. It indicates users
1C4096 and has 512 bytes in total (user indexes of bit0-bit7 are in ascending order).
Each bit indicates whether a BTV user is watching the program.
Options:
1. 1 -indicates that the user is watching the program
2. 0 -indicates that the user is not watching the program or the user does not existro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.28 |
hwDslamNtvPreviewProfileIDIndicates the index of a preview profile.
Range: 0-31
Default: 0rw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.29 |
hwDslamNtvProgramGradeIndicates the program grade.
Range: 0-255
Default: 255rw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.30 |
hwDslamNtvProgramNewIpCascadePortListIndicates the mask of cascade ports that are watching this program. There are 4096 bits in all,
that is, bit0-bit7 indicates the cascade ports with indexs 1-8(The index of the cascade port is
in ascending order in one byte). Each bit indicates whether a cascade port is watching the program.
Options:
1. 1 -watching this program
2. 0 -not watching this program or the cascade port does not exist
It can indicate 4096 cascade ports.ro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.31 |
hwDslamNtvProgramMACIndicates the MAC address of a program. It supports the read operation and does not
support the modify or create operation. It is valid when the IGMP mode is oamGroupControl.ro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.32 |
hwDslamNtvProgramBTVUserPortList2Indicates the mask of BTV users that are watching this program. It has 4096 bits. Each bit
indicates whether a BTV user is watching the program.
Indicates a multicast port with an index in the range of 4097C8192, 512 bytes in total (user
indexes of bit0-bit7 are in ascending order).
Options:
1. 1 -indicates that the user is watching the program
2. 0 -indicates that the user is not watching the program or the user does not existro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.33 |
hwDslamNtvProgramVideoTagVlanThe video vlan of program.When set to 0,there will be no vlan in the video.rw Integer32 .1.3.6.1.4.1.2011.6.28.18.1.40 |
hwDslamNtvProgramIPv6Indicates the IPv6 address of a program, the multicast address.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.6.28.18.1.41 |
hwDslamNtvProgramSourceIPv6Indicates the IPv6 address of the program source.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.6.28.18.1.42 |
hwDslamNtvProgramBTVUserPortList3Indicates the mask of BTV users that are watching this program. It has 4096 bits. Each bit
indicates whether a BTV user is watching the program.
Indicates a multicast port with an index in the range of 8193C12288, 512 bytes in total (user
indexes of bit0-bit7 are in ascending order).
Options:
1. 1 -indicates that the user is watching the program
2. 0 -indicates that the user is not watching the program or the user does not existro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.43 |
hwDslamNtvProgramBTVUserPortList4Indicates the mask of BTV users that are watching this program. It has 4096 bits. Each bit
indicates whether a BTV user is watching the program.
Indicates a multicast port with an index in the range of 12289C16384, 512 bytes in total (user
indexes of bit0-bit7 are in ascending order).
Options:
1. 1 -indicates that the user is watching the program
2. 0 -indicates that the user is not watching the program or the user does not existro OCTET STRING .1.3.6.1.4.1.2011.6.28.18.1.44 |
hwDslamNtvRightProfileTableIndicates the multicast authority profile table.
The index of this table is hwDslamNtvRightProfileIndex. SEQUENCE OF HwDslamNtvRightProfileEntry .1.3.6.1.4.1.2011.6.28.19 |
hwDslamNtvRightProfileEntryIndicates the multicast authority profile table.
The index of this entry is hwDslamNtvRightProfileIndex. HwDslamNtvRightProfileEntry .1.3.6.1.4.1.2011.6.28.19.1 |
hwDslamNtvRightProfileIndexIndicates the index of an authority profile in the profile mode.
Its value and algorithm in the user mode are the same as those of hwDslamNtvUserIndex.
You can also fill -1 and the system will automatically allocate an index.ro Integer32 .1.3.6.1.4.1.2011.6.28.19.1.1 |
hwDslamNtvRightProfileNameIndicates the name of an authority profile.
Range: 1-16rw OCTET STRING .1.3.6.1.4.1.2011.6.28.19.1.2 |
hwDslamNtvRightProfileRowStatusRow status, used to query, create, modify, and delete a multicast authority profile.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a multicast authority profile, this leaf need not be issued together.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.19.1.3 |
hwDslamNtvProgramMask1Indicates the program mask. This leaf indicates the authority of programs with indexes 1-64,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.4 |
hwDslamNtvProgramMask2Indicates the program mask. This leaf indicates the authority of programs with indexes 65-128,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.5 |
hwDslamNtvRightProfileCountRight profile count.
Count of the users who can watch the program in the right profile.ro Integer32 .1.3.6.1.4.1.2011.6.28.19.1.6 |
hwDslamNtvRightProfilePortList1Port list of slot0 to slot7 who can watch the program in the right profile.ro PortList .1.3.6.1.4.1.2011.6.28.19.1.7 |
hwDslamNtvRightProfilePortList2Port list of slot8 to slot15 who can watch the program in the right profile.ro PortList .1.3.6.1.4.1.2011.6.28.19.1.8 |
hwDslamNtvProgramMask3Indicates the program mask. This leaf indicates the authority of programs with indexes 129-192,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.9 |
hwDslamNtvProgramMask4Indicates the program mask. This leaf indicates the authority of programs with indexes 193-256,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.10 |
hwDslamNtvProgramMask5Indicates the program mask. This leaf indicates the authority of programs with indexes 257-320,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.11 |
hwDslamNtvProgramMask6Indicates the program mask. This leaf indicates the authority of programs with indexes 321-384,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.12 |
hwDslamNtvProgramMask7Indicates the program mask. This leaf indicates the authority of programs with indexes 385-448,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.13 |
hwDslamNtvProgramMask8Indicates the program mask. This leaf indicates the authority of programs with indexes 449-512,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.14 |
hwDslamNtvProgramMask9Indicates the program mask. This leaf indicates the authority of programs with indexes 513-576,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.15 |
hwDslamNtvProgramMask10Indicates the program mask. This leaf indicates the authority of programs with indexes 577-640,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.16 |
hwDslamNtvProgramMask11Indicates the program mask. This leaf indicates the authority of programs with indexes 641-704,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.17 |
hwDslamNtvProgramMask12Indicates the program mask. This leaf indicates the authority of programs with indexes 705-768,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.18 |
hwDslamNtvProgramMask13Indicates the program mask. This leaf indicates the authority of programs with indexes 769-832,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.19 |
hwDslamNtvProgramMask14Indicates the program mask. This leaf indicates the authority of programs with indexes 833-896,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.20 |
hwDslamNtvProgramMask15Indicates the program mask. This leaf indicates the authority of programs with indexes 897-960,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.21 |
hwDslamNtvProgramMask16Indicates the program mask. This leaf indicates the authority of programs with indexes 961-1024,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.22 |
hwDslamNtvProgramMask17Indicates the program mask. This leaf indicates the authority of programs with indexes 1025-1088,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.23 |
hwDslamNtvProgramMask18Indicates the program mask. This leaf indicates the authority of programs with indexes 1089-1152,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.24 |
hwDslamNtvProgramMask19Indicates the program mask. This leaf indicates the authority of programs with indexes 1153-1216,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.25 |
hwDslamNtvProgramMask20Indicates the program mask. This leaf indicates the authority of programs with indexes 1217-1280,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.26 |
hwDslamNtvProgramMask21Indicates the program mask. This leaf indicates the authority of programs with indexes 1281-1344,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.27 |
hwDslamNtvProgramMask22Indicates the program mask. This leaf indicates the authority of programs with indexes 1345-1408,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.28 |
hwDslamNtvProgramMask23Indicates the program mask. This leaf indicates the authority of programs with indexes 1409-1472,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.29 |
hwDslamNtvProgramMask24Indicates the program mask. This leaf indicates the authority of programs with indexes 1473-1536,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.30 |
hwDslamNtvProgramMask25Indicates the program mask. This leaf indicates the authority of programs with indexes 1537-1600,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.31 |
hwDslamNtvProgramMask26Indicates the program mask. This leaf indicates the authority of programs with indexes 1601-1664,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.32 |
hwDslamNtvProgramMask27Indicates the program mask. This leaf indicates the authority of programs with indexes 1665-1728,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.33 |
hwDslamNtvProgramMask28Indicates the program mask. This leaf indicates the authority of programs with indexes 1729-1792,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.34 |
hwDslamNtvProgramMask29Indicates the program mask. This leaf indicates the authority of programs with indexes 1793-1856,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.35 |
hwDslamNtvProgramMask30Indicates the program mask. This leaf indicates the authority of programs with indexes 1857-1920,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.36 |
hwDslamNtvProgramMask31Indicates the program mask. This leaf indicates the authority of programs with indexes 1921-1984,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.37 |
hwDslamNtvProgramMask32Indicates the program mask. This leaf indicates the authority of programs with indexes 1985-2048,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.38 |
hwDslamNtvRightProfileUserRefCountIndicates the number of users bound to the profile.ro Integer32 .1.3.6.1.4.1.2011.6.28.19.1.39 |
hwDslamNtvProgramMask33Indicates the program mask. This leaf indicates the authority of programs with indexes 2049-2112,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.40 |
hwDslamNtvProgramMask34Indicates the program mask. This leaf indicates the authority of programs with indexes 2113-2176,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.41 |
hwDslamNtvProgramMask35Indicates the program mask. This leaf indicates the authority of programs with indexes 2177-2240,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.42 |
hwDslamNtvProgramMask36Indicates the program mask. This leaf indicates the authority of programs with indexes 2241-2304,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.43 |
hwDslamNtvProgramMask37Indicates the program mask. This leaf indicates the authority of programs with indexes 2305-2368,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.44 |
hwDslamNtvProgramMask38Indicates the program mask. This leaf indicates the authority of programs with indexes 2369-2432,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.45 |
hwDslamNtvProgramMask39Indicates the program mask. This leaf indicates the authority of programs with indexes 2433-2496,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.46 |
hwDslamNtvProgramMask40Indicates the program mask. This leaf indicates the authority of programs with indexes 2497-2560,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.47 |
hwDslamNtvProgramMask41Indicates the program mask. This leaf indicates the authority of programs with indexes 2561-2624,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.48 |
hwDslamNtvProgramMask42Indicates the program mask. This leaf indicates the authority of programs with indexes 2625-2688,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.49 |
hwDslamNtvProgramMask43Indicates the program mask. This leaf indicates the authority of programs with indexes 2689-2752,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.50 |
hwDslamNtvProgramMask44Indicates the program mask. This leaf indicates the authority of programs with indexes 2753-2816,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.51 |
hwDslamNtvProgramMask45Indicates the program mask. This leaf indicates the authority of programs with indexes 2817-2880,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.52 |
hwDslamNtvProgramMask46Indicates the program mask. This leaf indicates the authority of programs with indexes 2881-2944,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.53 |
hwDslamNtvProgramMask47Indicates the program mask. This leaf indicates the authority of programs with indexes 2945-3008,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.54 |
hwDslamNtvProgramMask48Indicates the program mask. This leaf indicates the authority of programs with indexes 3009-3072,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.55 |
hwDslamNtvProgramMask49Indicates the program mask. This leaf indicates the authority of programs with indexes 3073-3136,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.56 |
hwDslamNtvProgramMask50Indicates the program mask. This leaf indicates the authority of programs with indexes 3137-3200,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.57 |
hwDslamNtvProgramMask51Indicates the program mask. This leaf indicates the authority of programs with indexes 3201-3264,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.58 |
hwDslamNtvProgramMask52Indicates the program mask. This leaf indicates the authority of programs with indexes 3265-3328,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.59 |
hwDslamNtvProgramMask53Indicates the program mask. This leaf indicates the authority of programs with indexes 3329-3392,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.60 |
hwDslamNtvProgramMask54Indicates the program mask. This leaf indicates the authority of programs with indexes 3393-3456,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.61 |
hwDslamNtvProgramMask55Indicates the program mask. This leaf indicates the authority of programs with indexes 3457-3520,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.62 |
hwDslamNtvProgramMask56Indicates the program mask. This leaf indicates the authority of programs with indexes 3521-3584,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.63 |
hwDslamNtvProgramMask57Indicates the program mask. This leaf indicates the authority of programs with indexes 3585-3648,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.64 |
hwDslamNtvProgramMask58Indicates the program mask. This leaf indicates the authority of programs with indexes 3649-3712,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.65 |
hwDslamNtvProgramMask59Indicates the program mask. This leaf indicates the authority of programs with indexes 3713-3776,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.66 |
hwDslamNtvProgramMask60Indicates the program mask. This leaf indicates the authority of programs with indexes 3777-3840,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.67 |
hwDslamNtvProgramMask61Indicates the program mask. This leaf indicates the authority of programs with indexes 3841-3904,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.68 |
hwDslamNtvProgramMask62Indicates the program mask. This leaf indicates the authority of programs with indexes 3905-3968,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.69 |
hwDslamNtvProgramMask63Indicates the program mask. This leaf indicates the authority of programs with indexes 3969-4032,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.70 |
hwDslamNtvProgramMask64Indicates the program mask. This leaf indicates the authority of programs with indexes 4033-4096,
64 programs in total. The indication methods of other mast leaves are the same as this table.
Each two bits indicate the authority to a program. Meanings of a 2-bit mask:
1. Forbidden(11)
2. Watch(01)
3. Preview(10)
4. idle(00)rw Bits .1.3.6.1.4.1.2011.6.28.19.1.71 |
hwDslamNtvChannelTrafficTableTraffic statistics table.
The index of this table is hwDslamNtvChannelIndex. SEQUENCE OF HwDslamNtvChannelTrafficEntry .1.3.6.1.4.1.2011.6.28.20 |
hwDslamNtvChannelTrafficEntryTraffic statistics table.
The index of this entry is hwDslamNtvChannelIndex. HwDslamNtvChannelTrafficEntry .1.3.6.1.4.1.2011.6.28.20.1 |
hwDslamNtvAdminStatusAdministration state.
The Administration state of video multicast traffic statistics.
Options:
1. up(1) -indicates the administration state is up
2. down(2) -indicates the administration state is downrw Enumeration .1.3.6.1.4.1.2011.6.28.20.1.1 |
hwDslamNtvTrafficValueTraffic Value.
The value of video multicast traffic statistics.
UNIT: kbit/sro Integer32 UNITS "kbps" .1.3.6.1.4.1.2011.6.28.20.1.2 |
hwDslamNtvIgmpConfigTablePort IGMP Parameter config table.
The index of this table is hwDslamNtvUserIndex. SEQUENCE OF HwDslamNtvIgmpConfigEntry .1.3.6.1.4.1.2011.6.28.21 |
hwDslamNtvIgmpConfigEntryPort IGMP Parameter config table.
The index of this entry is hwDslamNtvUserIndex. HwDslamNtvIgmpConfigEntry .1.3.6.1.4.1.2011.6.28.21.1 |
hwDslamNtvIgmpQuickLeaveQuick Leave.
When Quick Leave is true,IGMP-Proxy make user
offline as soon as receiving Leave packet instead
of sending specific queries.
Options:
1. true(1) -indicates the user can leave as soon as receiving Leave packet instead
of sending specific queries
2. false(1) -indicates the user can leave after sending specific queriesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.21.1.1 |
hwDslamNtvProgramLogTableProgram Log statistics table.
The indexes of this table are hwDslamNtvProgramLogStartTime, hwDslamNtvProgramLogEndTime and hwDslamNtvProgramLogIP. SEQUENCE OF HwDslamNtvProgramLogEntry .1.3.6.1.4.1.2011.6.28.22 |
hwDslamNtvProgramLogEntryProgram Log statistics table.
The indexes of this entry are hwDslamNtvProgramLogStartTime, hwDslamNtvProgramLogEndTime and hwDslamNtvProgramLogIP. HwDslamNtvProgramLogEntry .1.3.6.1.4.1.2011.6.28.22.1 |
hwDslamNtvProgramLogStartTimeStart time.
Start time of the program log Statistics.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.22.1.1 |
hwDslamNtvProgramLogEndTimeEnd time.
End time of the program log Statistics.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.22.1.2 |
hwDslamNtvProgramLogIPProgram IP address.ro IpAddress .1.3.6.1.4.1.2011.6.28.22.1.3 |
hwDslamNtvProgramLogUserNumTotal user number.ro Integer32 .1.3.6.1.4.1.2011.6.28.22.1.4 |
hwDslamNtvProgramLogTotalTimeTotal time.ro Integer32 .1.3.6.1.4.1.2011.6.28.22.1.5 |
hwDslamNtvUpportTableUpport management table.
The index of this table is hwDslamNtvUpportTblIndex. SEQUENCE OF HwDslamNtvUpportEntry .1.3.6.1.4.1.2011.6.28.23 |
hwDslamNtvUpportEntryUpport management table.
The index of this entry is hwDslamNtvUpportTblIndex. HwDslamNtvUpportEntry .1.3.6.1.4.1.2011.6.28.23.1 |
hwDslamNtvUpportTblIndexUpport index.rw Integer32 .1.3.6.1.4.1.2011.6.28.23.1.1 |
hwDslamNtvUpportTblRowStatusRow status.
Add or delete a table item.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.23.1.2 |
hwDslamNtvUpportTblInterUp Port.Frame/Slot/Port.rw Integer32 .1.3.6.1.4.1.2011.6.28.23.1.3 |
hwDslamNtvUpportTblVlanVlanId of Up Port.rw Integer32 .1.3.6.1.4.1.2011.6.28.23.1.4 |
hwDslamNtvUpportTblHostIPIGMP host IP address.
If IP address of Upport-interface is not configured,
IGMP-host-IP-address will be used to send IGMP packets.rw IpAddress .1.3.6.1.4.1.2011.6.28.23.1.5 |
hwDslamNtvUpportTblRouterVersionThe current IGMP Version of up port.It is include V1/V2/V3 version.ro Integer32 .1.3.6.1.4.1.2011.6.28.23.1.6 |
hwDslamNtvUpportTblAllocBandwidthThe uplink port allocates multicast bandwidth. unit:kbps.rw Integer32 .1.3.6.1.4.1.2011.6.28.23.1.7 |
hwDslamNtvUpportTblUsedBandwidthIt has been used multicase bandwidth of up port. unit:kbps.ro OCTET STRING .1.3.6.1.4.1.2011.6.28.23.1.8 |
hwDslamNtvUpportTblPortSpeedThe ethernet port speed. unit:kbpsro Integer32 .1.3.6.1.4.1.2011.6.28.23.1.9 |
hwDslamNtvUpportTblMFSResultGet the Multicast Flow Statics result of an appointed uplink port.ro Integer32 .1.3.6.1.4.1.2011.6.28.23.1.10 |
hwDslamNtvIpCascadeTableIndicates the multicast subtending port table.
The index of this table is hwDslamntvIpCascadePortIndex. SEQUENCE OF HwDslamNtvIpCascadeEntry .1.3.6.1.4.1.2011.6.28.24 |
hwDslamNtvIpCascadeEntryIndicates the multicast subtending port table.
The index of this entry is hwDslamntvIpCascadePortIndex. HwDslamNtvIpCascadeEntry .1.3.6.1.4.1.2011.6.28.24.1 |
hwDslamntvIpCascadePortIndexIndicates the index of a multicast subtending port.ro Integer32 .1.3.6.1.4.1.2011.6.28.24.1.1 |
hwDslamNtvIpCascadePortRowStatusRow status, used to query, create, modify, and delete a multicast subtending port.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a multicast subtending port, this leaf need not be issued together.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.24.1.2 |
hwDslamntvIpCascadePortFrameSlotPortIndicates the shelf/slot/port ID of the bandwidth management upstream port.
It is not a port index. The most significant 8 bits indicate the shelf ID,
the next 8 bits indicate the slot ID, and the last 16 bits indicate the port ID.rw Integer32 .1.3.6.1.4.1.2011.6.28.24.1.3 |
hwDslamntvIpCascadeProgramWatchingCountIndicates the number of programs being watched by an IP subtending port.ro Integer32 .1.3.6.1.4.1.2011.6.28.24.1.4 |
hwDslamntvIpCascadePortStaticJoinIndicates the static pre-join attribute of an IP subtending port.
Options:
1. true(1) -indicates the static pre-join attribute of an IP subtending port is on
2. false(2) -indicates the static pre-join attribute of an IP subtending port is off
Default: false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.24.1.5 |
hwDslamntvIpCascadePortQuickLeaveIndicates the quick leave attribute of an IP subtending port.
Options:
1. true(1) -indicates the IP subtending port can leave quickly
2. false(2) -indicates the IP subtending port cannot leave quickly
Default: false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.24.1.6 |
hwDslamntvIpCascadePortModeSnooping mode of the IP cascade port.
Options:
1. snooping(0) -indicates the snooping mode of the IP cascade port is snooping
2. discard(1) -indicates the discard mode of the IP cascade port is discard
3. forwarding(2) -indicates the discard mode of the IP cascade port is forwardingrw Enumeration .1.3.6.1.4.1.2011.6.28.24.1.7 |
hwDslamntvIpCascadePortProcAfterMismatchIndicates the processing mode when matching of an IP subtending port fails.
Options:
1. transparent(0) -indicates the process mode is transparent
2. discard(1) -indicates the process mode is discard
Default: transparent(0).rw Enumeration .1.3.6.1.4.1.2011.6.28.24.1.8 |
hwDslamNtvIpCascadePortMatchParaIndicates the first extended key parameter of a subtending port,
supported by only the GPON and EPON ports. It indicates ontid for
an EPON port or a GPON port in the profile mode; it indicates
gemportid for a GPON port in the non-profile mode. The range is
determined by the line specifications. If the cascade port is a
GE cascade port, the returned value for hwDslamNtvIpCascadePortMatchPara is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.24.1.9 |
hwDslamntvIpCascadePortControlWordIndicates whether to concern about the VLAN contained in the packet sent from the IP subtending port.
Options:
1. true(1) -indicates to concern about the VLAN contained in the packet sent from the IP subtending port
2. false(2) -indicates not to concern about the VLAN contained in the packet sent from the IP subtending port
Default: true(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.24.1.10 |
hwDslamNtvIpCascadePortMatchPara2Indicates the second extended key parameter of a GPON subtending port. It is supported by only a
GPON product in the profile. It indicates gemindex of a GPON port. The range is determined by the
line specifications. If the cascade port is a GE cascade port, the returned value for
hwDslamNtvIpCascadePortMatchPara2 is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.24.1.11 |
hwDslamNtvUserRunStateTableIndicates the online status of a multicast user.
The indexes of this table are hwDslamNtvUserIndex and hwDslamNtvUserRunStateProgramIndex. SEQUENCE OF HwDslamNtvUserRunStateEntry .1.3.6.1.4.1.2011.6.28.25 |
hwDslamNtvUserRunStateEntryIndicates the online status of a multicast user.
The indexes of this entry are hwDslamNtvUserIndex and hwDslamNtvUserRunStateProgramIndex. HwDslamNtvUserRunStateEntry .1.3.6.1.4.1.2011.6.28.25.1 |
hwDslamNtvUserRunStateProgramIndexIndicates the program index, corresponding to hwDslamNtvProgramIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.25.1.1 |
hwDslamNtvUserRunStateProgramStatusIndicates the program status.
Options:
1. watch(1) -indicates the program status is watch
2. preview(2) -indicates the program status is preview
3. invalid(3) -indicates the program status is invalidrw Enumeration .1.3.6.1.4.1.2011.6.28.25.1.2 |
hwDslamNtvUserProfileTableIndicates the binding relationship between a user and a profile in the profile mode.
The indexes of this table are hwDslamNtvUserIndex and hwDslamNtvUserProfileIndex. SEQUENCE OF HwDslamNtvUserProfileEntry .1.3.6.1.4.1.2011.6.28.26 |
hwDslamNtvUserProfileEntryIndicates the binding relationship between a user and a profile in the profile mode.
The indexes of this entry are hwDslamNtvUserIndex and hwDslamNtvUserProfileIndex. HwDslamNtvUserProfileEntry .1.3.6.1.4.1.2011.6.28.26.1 |
hwDslamNtvUserProfileIndexIndicates the index of an authority profile.
Range: 1-2000ro Integer32 .1.3.6.1.4.1.2011.6.28.26.1.1 |
hwDslamNtvUserProfileTblRowStatusRow status, used to query, create, modify, and delete the binding between
a multicast user and a profile. It supports the active(1), createAndGo(4),
and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.26.1.2 |
hwDslamNtvAttrProfileTableUser Attribute profile management table.
The index of this table is hwDslamNtvAttrProfileIndex. SEQUENCE OF HwDslamNtvAttrProfileEntry .1.3.6.1.4.1.2011.6.28.27 |
hwDslamNtvAttrProfileEntryUser Attribute profile management table.
The index of this entry is hwDslamNtvAttrProfileIndex. HwDslamNtvAttrProfileEntry .1.3.6.1.4.1.2011.6.28.27.1 |
hwDslamNtvAttrProfileIndexThe user attribute profile index.ro Integer32 .1.3.6.1.4.1.2011.6.28.27.1.1 |
hwDslamNtvAttrProfileNameThe user attribute profile name,It is the keywords of attribute profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.28.27.1.2 |
hwDslamNtvAttrProfileQuickLeaveWhen the user sends igmp leave packet,if the value is true(1),then the multicast table is delete,
and the system does not send the special query packet to user.if the value is false(2),then the system need
send the special query packet to user.
Options:
1. true(1) -indicates the system need not send the special query packet to user
2. false(2) -indicates the system needs to send the special query packet to userrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.27.1.3 |
hwDslamNtvAttrProfileAuthorizationThe user's authorization ,{ auth(0),no-auth(1) }rw Integer32 .1.3.6.1.4.1.2011.6.28.27.1.4 |
hwDslamNtvAttrProfileMaxBandwidthThe user permita the max bandwidth to traffic multicast.rw Integer32 .1.3.6.1.4.1.2011.6.28.27.1.5 |
hwDslamNtvAttrProfileMaxGroupsThe max channel number that a user can watch at the same time.rw Integer32 .1.3.6.1.4.1.2011.6.28.27.1.6 |
hwDslamNtvAttrProfileEnableLogLog switch. When the log switch is on(1),
the system will record the events of starting or stopping watching programs of the user.
When the log switch is off(2), the system will stop recording.rw Integer32 .1.3.6.1.4.1.2011.6.28.27.1.7 |
hwDslamNtvAttrProfileAuthFailCutWhen the user authorization fails,if the value is discard(0), the user's igmp packet is discard,
and if the value is forward(1),the user's igmp packet is sent to upper router }rw Integer32 .1.3.6.1.4.1.2011.6.28.27.1.8 |
hwDslamNtvAttrProfilePacketModeThe packet process mode when receive the user's igmp packet,if snooping(0),then config the user multicast
table,and send this igmp packet to upper router. if discard(1), then discard the user's igmp packet.
if forwarding(2),the send user's igmp packet to upper router,do not configure user multicast table.ro Integer32 .1.3.6.1.4.1.2011.6.28.27.1.9 |
hwDslamNtvSourceCheckSource-IP-check administer state.
The true(enable)/ false(disable) state for Source-IP-check.
Used to enable/disable Source-IP-check to control whether source-IP
must be match when forwarding multicast data.
Options:
1. true(1) -indicates the Soure-IP-check is enabled
2. false(2) -indicates the Soure-IP-check is disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.31 |
hwDslamNtvDefaultSourceDefault multicast-source for program.
The program which is not bind to multicast-source when added to
program room will be bind to this default source.rw IpAddress .1.3.6.1.4.1.2011.6.28.32 |
hwDslamNtvReportIntervalUnsolicited report interval.
The frequency at which Unsolicited IGMP Host-Report packets
are transmitted to up-device.
Default: 10
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.33 |
hwDslamNtvUpportWorkModeSets/Queries the working mode of an upstream port. When the upstream port works in
the pim-ssm mode, this leaf does not support the modify operation.
Options:
1. program(1) -indicates the working mode of an upstream port is program
2. mstp(2) -indicates the working mode of an upstream port is mstp
3. broadcast(3) -indicates the working mode of an upstream port is broadcast
4. protect(4) -indicates the working mode of an upstream port is protect
5. default(5) -indicates the working mode of an upstream port is default
6. queryDetect(6) -indicates the working mode of an upstream port is queryDetect
7. rrpp(7) -indicates the working mode of an upstream port is rrpp
Default: default(5)rw Enumeration .1.3.6.1.4.1.2011.6.28.34 |
hwDslamNtvV1RouterTimeroutThe Version 1 Router Present Timeout is how long a host must wait
after hearing a Version 1 Query before it may send any IGMPv2
messages.
Default: 400
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.35 |
hwDslamNtvLastMemberQueryCountSets/Queries the number of IGMPv2 group-specific queries.
Range: 1-10
The default value is equal to hwDslamNtvRobustness.rw Integer32 .1.3.6.1.4.1.2011.6.28.36 |
hwDslamNtvLastMemberQueryIntervalSets/Queries the interval of IGMPv2 group-specific queries.
Range: 1-50000.
Unit: 0.1s, that is, 0.1-5000s. By default, it is 10 (that is, 1 second).
The group-specific query interval must be longer than the group-specific
query response. When a user goes offline without sending the report packet,
if the system does not receive the report packet from the user within the
maximum response time after the general query packet is sent, the system
sends the general query packets for N-1 times based on the interval for
the general query (N indicates the robustness variable). If the system
does not receive the report packet within the maximum response time after
the last general query is sent, it indicates that the user is offline.
Aging time of a subscriber = General query interval x Robustness
variable + Response time of the general query.rw Integer32 .1.3.6.1.4.1.2011.6.28.37 |
hwDslamNtvLastMemberQueryResponseSets/Queries the maximum response time for an IGMPV2 group-specific query.
Range: 1-255.
Unit: 0.1s, that is, 0.1-25.5s. By default, it is 8 (namely 0.8s).
The group-specific query response must be shorter than the group-specific
query interval. If the system does not receive the report packet within
the maximum response time after the group-specific query packet is sent,
the system sends the group-specific query packets for specified times
(times of the group-specific query) based on the interval for the group-specific
query. If the system does not receive the report packet within the specified
time (maximum response time to the group-specific query) after the last
group-specific query packet is sent, it indicates that the user is offline.
User aging time = Interval for group-specific query x Times of group-specific
query + Maximum response time to group-specific query.rw Integer32 .1.3.6.1.4.1.2011.6.28.38 |
hwDslamNtvAuthorizeSwitchIndicates the authentication switch.
Options:
1. true(1) -indicates the autentication switch is on
2. false(2) -indicates the autentication switch is off
Default: true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.39 |
hwDslamNtvPreviewSwitchIndicates the system preview switch.
Options:
1. true(1) -indicates the system preview switch is on
2. false(2) -indicates the system preview switch is off
Default: true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.40 |
hwDslamNtvRecognitionTimeIndicates the system recognition time.
Range: 1-120s
Default: 30s
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.41 |
hwDslamNtvClearPreviewCountClears the preview count of all users.
Options:
1. active(1) -clear the preview count of all usersrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.42 |
hwDslamNtvTimeClearPreviewCountClears the preview count of all users regularly. By default,
the system clears the preview count of all users at 4:00 a.m.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.43 |
hwDslamNtvRightAssignModeRight assigned mode.
Options:
1. user-based(1) -indicates the right assigned mode is user-based
2. profile-based(2) -indicates the right assigned mode is profile-basedrw Enumeration .1.3.6.1.4.1.2011.6.28.44 |
hwDslamNtvLogReportIntervalIndicates the interval for active report of user demand log.
Range: 0-12
Default: 2
Unit: hour
0 indicates disabling the active report of user demand log.rw Integer32 .1.3.6.1.4.1.2011.6.28.45 |
hwDslamNtvLogOperationSets the multicast log report function.
Options:
1. logReportStart(1) -immediately report all current logs.
2. logReportStop(2) -stop reporting logs.
3. invalid(-1) -indicates invalid.rw Enumeration .1.3.6.1.4.1.2011.6.28.46 |
hwDslamNtvBandwidthManagementSwitchIndicates the bandwidth management and CAC switch.
Options:
1. true(1) -indicates the bandwidth management and CAC switch is on
2. false(2) -indicates the bandwidth management and CAC switch is off
Default: true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.47 |
hwDslamNtvLogSwitchIndicates the global log switch.
Options:
1. true(1) -indicates the global log switch is on
2. false(2) -indicates the global log switch is off
Default: true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.48 |
hwDslamNtvFlow8021ppriority of 802.1p
Default: 6rw Integer32 .1.3.6.1.4.1.2011.6.28.52 |
hwDslamNtvFlowVlanidVlan id.
Default:1rw Integer32 .1.3.6.1.4.1.2011.6.28.53 |
hwDslamNtvFlowEncapencapsulation type
Options:
1. ipoe(1) -indicates the encapsulation type is ipoe
2. pppoe(2) -indicates the encapsulation type is pppoe
Default: ipoerw Enumeration .1.3.6.1.4.1.2011.6.28.54 |
hwDslamNtvQuerySwitchIGMP user querier switch.When enable, device may send igmp query to
user sequentially, else, just forward query from upper router to user.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.55 |
hwDslamNtvReportProxySwitchIndicates the proxy switch for the report packets in the IGMP snooping mode.
Options:
1. true(1) -indicates the proxy switch for the report packets in the
IGMP snooping mode is on
2. false(2) -indicates the proxy switch for the report packets in the
IGMP snooping mode is off
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.56 |
hwDslamNtvLeaveProxySwitchIndicates the proxy switch for the leave packets in the IGMP snooping mode.
Options:
1. true(1) -indicates the proxy switch for the leave packets in the
IGMP snooping mode is on
2. false(2) -indicates the proxy switch for the leave packets in the
IGMP snooping mode is off
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.57 |
hwDslamNtvSnoopingUserAgingTimeThe aging time configuration for IGMP over PPPoE user under the IGMP
Snooping mode.
Unit: 1srw Integer32 .1.3.6.1.4.1.2011.6.28.58 |
hwDslamUnkownMulticastTunnelSwitchUnknown multicast tunneling switch.
Options:
1. true(1) -indicates the unknown multicast tunneling switch is on
2. false(2) -indicates the unknown multicast tunneling switch is off
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.59 |
hwDslamNtvUserAllocBwthPercentThe bandwidth percentage assigned for user. Default:100%rw Integer32 .1.3.6.1.4.1.2011.6.28.60 |
hwDslamNtvMFSTableIndicates the multicast traffic statistic table.
The index of this table is hwDslamNtvMFSProgramIndex. SEQUENCE OF HwDslamNtvMFSEntry .1.3.6.1.4.1.2011.6.28.61 |
hwDslamNtvMFSEntryIndicates the multicast traffic statistic table.
The index of this entry is hwDslamNtvMFSProgramIndex. HwDslamNtvMFSEntry .1.3.6.1.4.1.2011.6.28.61.1 |
hwDslamNtvMFSProgramIndexIndicates the program index. Its value and algorithm are the same as those of hwDslamNtvProgramIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.61.1.1 |
hwDslamNtvMFSResultIndicates the real-time multicast traffic statistics result.
Unit: kbit/s.ro Integer32 .1.3.6.1.4.1.2011.6.28.61.1.2 |
hwDslamNtvUserActionReportIndicates the user action report switch.
Options:
1. true(1) -indicates the user action report switch is on
2. false(2) -indicates the user action report switch is off
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.62 |
hwDslamNtvCDRReportIntervalIndicates the interval of reporting the CDRs automatically.
Range: 60-43200
Unit: second
Default: 600rw Integer32 .1.3.6.1.4.1.2011.6.28.63 |
hwDslamNtvCDRReportNumberIndicates the number of active CDR reports.
Range: 100-200
Default: 200rw Integer32 .1.3.6.1.4.1.2011.6.28.64 |
hwDslamNtvRightPrioModeIndicates the multicast user authority priority mode.
Options:
1. rightWPFI(1) -watch_preview_forbid_idle
2. rightWFPI(2) -watch_preview_forbid_idle
3. rightPWFI(3) -preview_watch_forbid_idle
4. rightPFWI(4) -preview_forbid_watch_idle
5. rightFWPI(5) -forbid_watch_preview_idle
6. rightFPWI(6) -forbid_preview_watch_idle
Default: rightFPWI(6)
W = watch, P = preview, F = forbid, and I = idle.rw Enumeration .1.3.6.1.4.1.2011.6.28.65 |
hwDslamNtvIgmpStatisticTableIndicates the various operations on IGMP packet statistics.
The index of this table is hwDslamNtvIgmpStatisticTypeIndex. SEQUENCE OF HwDslamNtvIgmpStatisticEntry .1.3.6.1.4.1.2011.6.28.66 |
hwDslamNtvIgmpStatisticEntryIndicates the various operations on IGMP packet statistics.
The index of this entry is hwDslamNtvIgmpStatisticTypeIndex. HwDslamNtvIgmpStatisticEntry .1.3.6.1.4.1.2011.6.28.66.1 |
hwDslamNtvIgmpStatisticOperModeIndicates the operation mode of performance statistics.
Options:
1. clearStatistic(1) -indicates clearing statistics
2. invalid(0) -indicates invalid operation moderw Enumeration .1.3.6.1.4.1.2011.6.28.66.1.1 |
hwDslamNtvIgmpStatisticTypeIndexIndicates the performance statistics type. Currently, only global IGMP statistic(1) is supported.
Options:
1. global IGMP statistic(1) -indicates the performance statistics type is global IGMP
statistic
2. specific port IGMP statistic(2) -indicates the performance statistics type is specific port
IGMP statistic
3. specific Multicast VLAN statistic(3) -indicates the performance statistics type is specific
Multicast VLAN statisticro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.2 |
hwDslamNtvIgmpStatisticPortThe ifIndex of IGMP statistic port.rw Integer32 .1.3.6.1.4.1.2011.6.28.66.1.3 |
hwDslamNtvIgmpStatisticMatchParaThe GemPortID of GPON portrw Integer32 .1.3.6.1.4.1.2011.6.28.66.1.4 |
hwDslamNtvIgmpStatisticGenQueryRcvIndicates the number of received general query packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.5 |
hwDslamNtvIgmpStatisticSpecQueryRcvIndicates the number of received group-specific query packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.6 |
hwDslamNtvIgmpStatisticReportV1RcvIndicates the number of received report packets of V1.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.7 |
hwDslamNtvIgmpStatisticReportV2RcvIndicates the number of received report packets of V2.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.8 |
hwDslamNtvIgmpStatisticReportV3RcvIndicates the number of received report packets of V3.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.9 |
hwDslamNtvIgmpStatisticErrQueryRcvIndicates the number of received errored query packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.10 |
hwDslamNtvIgmpStatisticErrReportRcvIndicates the number of received errored report packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.11 |
hwDslamNtvIgmpStatisticLeaveRcvIndicates the number of received leave packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.12 |
hwDslamNtvIgmpStatisticErrLeaveRcvIndicates the number of received errored leave packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.13 |
hwDslamNtvIgmpStatisticGenQuerySndIndicates the number of transmitted general query packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.14 |
hwDslamNtvIgmpStatisticSpecQuerySndIndicates the number of transmitted group-specific query packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.15 |
hwDslamNtvIgmpStatisticReportV1SndIndicates the number of transmitted report packets of V1.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.16 |
hwDslamNtvIgmpStatisticReportV2SndIndicates the number of transmitted report packets of V2.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.17 |
hwDslamNtvIgmpStatisticLeaveSndIndicates the number of transmitted leave packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.18 |
hwDslamNtvIgmpStatisticSnoopingMsgSndIndicates the number of transmitted snooping packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.19 |
hwDslamNtvIgmpStatisticErrV1ReportRcvIndicates the number of received errored V1 packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.20 |
hwDslamNtvIgmpStatisticErrV2ReportRcvIndicates the number of received errored V2 packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.21 |
hwDslamNtvIgmpStatisticErrV3ReportRcvIndicates the number of received errored V3 packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.22 |
hwDslamNtvIgmpStatisticReportV3SndIndicates the number of transmitted report packets of V3.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.23 |
hwDslamNtvIgmpStatisticInvalidRcvIndicates the number of received invalid IGMP packets.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.24 |
hwDslamNtvIgmpStatisticVlanThe ID of IGMP statistic Mvlan.rw Integer32 .1.3.6.1.4.1.2011.6.28.66.1.25 |
hwDslamNtvIgmpActiveProgramNumIndicates the number of programs in the active state in the multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.26 |
hwDslamNtvIgmpActiveUserNumIndicates the number of users in the active state in the multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.66.1.27 |
hwDslamNtvIgmpEncapIndicates the permitted IGMP packet encapsulation format.
Options:
1. all(0) -all encapsulation formats
2. ppp(1) -IGMP over PPP encapsulation format
3. ip(2) -IGMP over IP encapsulation format
Default: all(0)rw Enumeration .1.3.6.1.4.1.2011.6.28.67 |
hwDslamNtvIgmpEchoIndicates the IGMP echo switch.
Options:
1. true(1) -indicates the IGMP echo switch is on
2. false(2) -indicates the IGMP echo switch is off
Default: false(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.68 |
hwDslamNtvUpPortMFSTableMeasures the multicast traffic on a specified upstream port.
The index of this table is hwDslamNtvUpPortMFSIndex. SEQUENCE OF HwDslamNtvUpPortMFSEntry .1.3.6.1.4.1.2011.6.28.69 |
hwDslamNtvUpPortMFSEntryMeasures the multicast traffic on a specified upstream port.
The index of this entry is hwDslamNtvUpPortMFSIndex. HwDslamNtvUpPortMFSEntry .1.3.6.1.4.1.2011.6.28.69.1 |
hwDslamNtvUpPortMFSIndexIndicates the index of a multicast upstream port. Its value and usage are the same as those of hwDslamNtvVUpportTblIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.69.1.1 |
hwDslamNtvUpPortMFSResultIndicates the real-time multicast traffic statistics result.
Unit: kbit/s.ro Integer32 .1.3.6.1.4.1.2011.6.28.69.1.2 |
hwDslamNtvDefaultUpportDefault upport.rw Integer32 .1.3.6.1.4.1.2011.6.28.70 |
hwDslamNtvCDRReportRe-transmit the multicast CDR log.
if the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading this object will
result in implementation-specific results.
Options:
1. fail(1) -indicates not to re-transmit the multicast CDR log
2. all(2) -indicates re-transmit the multicast CDR logrw Enumeration .1.3.6.1.4.1.2011.6.28.71 |
hwDslamNtvV3QueryMaxResponseTimeIndicates the maximum response time for an IGMPV3 general query.
It is in the range of 1-31744 in the unit of 0.1s, that is, 0.1-3174.4s.
By default, it is 10 (namely 100s). The general group query response
must be shorter than the general group query interval. When a user goes
offline without sending the report packet, if the system does not receive
the report packet from the user within the maximum response time after the
general query packet is sent, the system sends the general query packets
for N-1 times based on the interval for the general query (N indicates the
robustness variable). If the system does not receive the report packet within
the maximum response time after the last general query is sent, it indicates
that the user is offline. Aging time of a subscriber = General query interval
x Robustness variable + Response time of the general query.
Unit: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.72 |
hwDslamNtvLastMemberV3QueryResponseSets/queries the maximum response time for IGMPV3 group-specific query.
It is in the range of 1-31744 (in 0.1s), namely 0.1-3174.4s. By default,
it is 8 (namely 0.8s). The group-specific query response must be shorter
than the group-specific query interval. If the system does not receive
the report packet within the maximum response time after the group-specific
query packet is sent, the system sends the group-specific query packets
for specified times (times of the group-specific query) based on the
interval for the group-specific query. If the system does not receive
the report packet within the specified time (maximum response time to
the group-specific query) after the last group-specific query packet is
sent, it indicates that the user is offline. User aging time = Interval
for group-specific query x Times of group-specific query + Maximum response
time to group-specific query.
Unit: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.73 |
hwDslamNtvSnoopingProcessThe process of different (S, G) matching different multicast snooping vlan in IGMPv3 Report.
Options:
1. firstmatch(1) -indicates the process of different (S, G) matching different multicast
snooping vlan in IGMPv3 Report
2. discard(2) -indicates the process of different (S, G) not matching different multicast
snooping vlan in IGMPv3 Reportrw Enumeration .1.3.6.1.4.1.2011.6.28.74 |
hwDslamNtvPreviewProfileTableIndicates various parameters of a preview profile in the system.
The index of this table is hwDslamNtvPreviewProfileIndex. SEQUENCE OF HwDslamNtvPreviewProfileEntry .1.3.6.1.4.1.2011.6.28.75 |
hwDslamNtvPreviewProfileEntryIndicates various parameters of a preview profile in the system.
The index of this entry is hwDslamNtvPreviewProfileIndex. HwDslamNtvPreviewProfileEntry .1.3.6.1.4.1.2011.6.28.75.1 |
hwDslamNtvPreviewProfileIndexIndicates the preview profile.
Range: 0-31
Profile 0 is created by default and cannot be created or deleted.ro Integer32 .1.3.6.1.4.1.2011.6.28.75.1.1 |
hwDslamNtvPreviewRowStatusRow status, used to query, create, modify, and delete a multicast preview profile.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a multicast preview profile, this leaf need not be issued together.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.75.1.2 |
hwDslamNtvPreviewDurationIndicates the preview duration.
Range: 10-6000
Default: 120
Unit: secondrw Integer32 (10..6000 ) UNITS "second" .1.3.6.1.4.1.2011.6.28.75.1.3 |
hwDslamNtvPreviewTimesIndicates the preview times.
Range: 1-255
Default: 8rw Integer32 (1..255 ) .1.3.6.1.4.1.2011.6.28.75.1.4 |
hwDslamNtvPreviewIntervalIndicates the preview interval.
Range: 0-7650
Default: 120
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.75.1.5 |
hwDslamNtvProgramRefCountIndicates the number of programs bound to the profile.ro Integer32 .1.3.6.1.4.1.2011.6.28.75.1.6 |
hwDslamNtvMVLANTableIndicates a multicast VLAN in the system, which records the VLAN attributes.
The index of this table is hwDslamNtvMVLANIndex. SEQUENCE OF HwDslamNtvMVLANEntry .1.3.6.1.4.1.2011.6.28.76 |
hwDslamNtvMVLANEntryIndicates a multicast VLAN in the system, which records the VLAN attributes.
The index of this entry is hwDslamNtvMVLANIndex. HwDslamNtvMVLANEntry .1.3.6.1.4.1.2011.6.28.76.1 |
hwDslamNtvMVLANIndexIndicates the index of a multicast VLAN.
You can also fill -1 and the system will automatically allocate an index.ro Integer32 (-1|1..256) .1.3.6.1.4.1.2011.6.28.76.1.1 |
hwDslamNtvMVLANLogSwitchSets the log switch.
Options:
1. enable(1) -indicates the log switch is on
2. disable(2) -indicates the log switch is off
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.2 |
hwDslamNtvMVLANIGMPPrioritySets the priority of IGMP packets based on a multicast VLAN.
Range: 0-7
Default: 6rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.3 |
hwDslamNtvMVLANGlobalLeaveSendSwitchIndicates whether to set the switch for sending global leave packets based on a multicast VLAN.
Options:
1. enable(1) -indicates setting the switch for sending global leave
packets based on a multicast VLAN
2. disable(2) -indicates not setting the switch for sending global leave
packets based on a multicast VLAN
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.4 |
hwDslamNtvMVLANIgmpModeIndicates the IGMP working mode.
Options:
1. igmpProxy(1) -indicates the IGMP working mode is igmpProxy
2. igmpSnooping(2) -indicates the IGMP working mode is igmpSnooping
3. tvOff(3) -indicates the IGMP working mode is tvOff
Default: tvOff(3)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.5 |
hwDslamNtvMVLANIgmpVerIndicates the IGMP version.
Options:
1. igmpV2(1) -indicates the IGMP version is V2
2. igmpV3(2) -indicates the IGMP version is V3
Default: igmpV3(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.6 |
hwDslamNtvMVLANMatchModeIndicates the program matching mode.
Options:
1. enable(1) -indicates the program matching mode is enabled
2. disable(2) -indicates the program matching mode is disabled
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.7 |
hwDslamNtvMVLANDynStartIPIndicates the start IP address of the programs that can be generated dynamically.rw IpAddress .1.3.6.1.4.1.2011.6.28.76.1.8 |
hwDslamNtvMVLANDynEndIPIndicates the end IP address of the programs that can be generated dynamically.rw IpAddress .1.3.6.1.4.1.2011.6.28.76.1.9 |
hwDslamNtvMVLANSnoopingReportSwitchEnables or disables the transmission of the report packet in the IGMP snooping mode.
Options:
1. enable(1) -enable the transmission of the report packet in the IGMP snooping mode
2. disable(2) -disable the transmission of the report packet in the IGMP snooping mode
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.10 |
hwDslamNtvMVLANSnoopingLeaveSwitchEnables or disables the transmission of the leave packet in the IGMP snooping mode.
Options:
1. enable(1) -enable the transmission of the leave packet in the IGMP snooping mode
2. disable(2) -disable the transmission of the leave packet in the IGMP snooping mode
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.11 |
hwDslamNtvMVLANUnsoliReportTimeIndicates the interval for a user to actively report packets.
Range: 10-5000
Default: 10
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.12 |
hwDslamNtvMVLANRowstatusRow status, used to query, create, modify, and delete a multicast VLAN.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a multicast VLAN, this leaf need not be issued together.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.76.1.13 |
hwDslamNtvDefaultUplinkPortIndicates the default uplink port.
If the default uplink port is not configured, the returned value for hwDslamNtvDefaultUplinkPort is -1.rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.14 |
hwDslamNtvVlanIDIndicates the multicast VLAN ID
Range: 1-4093rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.15 |
hwDslamNtvMVLANProgramMask1Indicates the program mask of a multicast VLAN. It has 16 bytes and each bit indicates a program.
It can indicate 16 x 8 = 128 multicast programs in total. It indicates programs according to the byte order.
The first byte indicates multicast programs with indexes 1-8. Here, bit 7 indicates program 1, bit 0 indicates
program 8, and other bits are in the same manner. The second 2 byte indicates multicast programs with indexes 9-16.
Here, bit 7 indicates program 9, bit 0 indicates program 16, and other bits are in the same manner.
Other bytes indicate programs in the same way.
Bit value 1 indicates that the multicast program corresponding to the index exits in the multicast VLAN;
bit value 0 indicates that the multicast program corresponding to the index does not exit in the
multicast VLAN. For example, the value of hwDslamNtvMVLANProgramMask1 80.00.80.00.00.00.00.00.00.00.00.00.00.00.00.00
indicates that programs with index 1 and 17 exist in this multicast VLAN.
Range: 1-128ro Bits .1.3.6.1.4.1.2011.6.28.76.1.16 |
hwDslamNtvMVLANProgramMask2Indicates the program mask of a multicast VLAN. It indicates the 128 multicast programs
after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.17 |
hwDslamNtvMVLANProgramMask3Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.18 |
hwDslamNtvMVLANProgramMask4Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.19 |
hwDslamNtvMVLANProgramMask5Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.20 |
hwDslamNtvMVLANProgramMask6Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.21 |
hwDslamNtvMVLANProgramMask7Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leafro Bits .1.3.6.1.4.1.2011.6.28.76.1.22 |
hwDslamNtvMVLANProgramMask8Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.23 |
hwDslamNtvMVLANProgramMask9Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.24 |
hwDslamNtvMVLANProgramMask10Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.25 |
hwDslamNtvMVLANProgramMask11Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.26 |
hwDslamNtvMVLANProgramMask12Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.27 |
hwDslamNtvMVLANProgramMask13Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.28 |
hwDslamNtvMVLANProgramMask14Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.29 |
hwDslamNtvMVLANProgramMask15Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.30 |
hwDslamNtvMVLANProgramMask16Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leafro Bits .1.3.6.1.4.1.2011.6.28.76.1.31 |
hwDslamNtvMVLANProgramMask17Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.32 |
hwDslamNtvMVLANProgramMask18Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.33 |
hwDslamNtvMVLANProgramMask19Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.34 |
hwDslamNtvMVLANProgramMask20Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.35 |
hwDslamNtvMVLANProgramMask21Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.36 |
hwDslamNtvMVLANProgramMask22Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.37 |
hwDslamNtvMVLANProgramMask23Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.38 |
hwDslamNtvMVLANProgramMask24Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.39 |
hwDslamNtvMVLANProgramMask25Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.40 |
hwDslamNtvMVLANProgramMask26Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.41 |
hwDslamNtvMVLANProgramMask27Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.42 |
hwDslamNtvMVLANProgramMask28Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.43 |
hwDslamNtvMVLANProgramMask29Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.44 |
hwDslamNtvMVLANProgramMask30Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.45 |
hwDslamNtvMVLANProgramMask31Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.46 |
hwDslamNtvMVLANProgramMask32Indicates the program mask of a multicast VLAN. It indicates the 128 multicast
programs after the preceding leaf. The bit meanings are the same as the preceding leaf.ro Bits .1.3.6.1.4.1.2011.6.28.76.1.47 |
hwDslamNtvMVlANInnerVlanIndicates the inner VLAN of a multicast VLAN.
Range: 1-4095
Default: 1rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.48 |
hwDslamNtvMvlanVideoModeIndicates the duplication mode of a multicast VLAN.
Options:
1. multicast(1) -indicates the duplication mode is multicast.
2. unicast(2) -indicates the duplication mode is unicast.
Default: multicast(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.49 |
hwDslamNtvMVLANIgmpQueryIntervalIndicates the general query interval of query message in multicast VLAN.
When the value is -1, the query interval will be the global configuration.
If the MVLAN general query interval is not configured, the returned value
for hwDslamNtvMVLANIgmpQueryInterval is -1.rw Integer32 (-1|30..5000) .1.3.6.1.4.1.2011.6.28.76.1.50 |
hwDslamNtvMVLANIgmpV2QueryMaxResponseTimeIndicates the maximum response time for general query message in multicast VLAN,
whose version is IGMP v2.
When the value is -1, the max response time will be the global configuration.rw Integer32 (-1|1..255) .1.3.6.1.4.1.2011.6.28.76.1.51 |
hwDslamNtvMVLANIgmpV3QueryMaxResponseTimeIndicates the maximum response time for general query message in multicast VLAN,
whose version is IGMP v3.
When the value is -1, the max response time will be the global configuration.rw Integer32 (-1|1..31744) .1.3.6.1.4.1.2011.6.28.76.1.52 |
hwDslamNtvMVLANIgmpRobustnessIndicates the robustness for query message in multicast VLAN.
When the value is -1, the robustness will be the global configuration.rw Integer32 (-1|1..10) .1.3.6.1.4.1.2011.6.28.76.1.53 |
hwDslamNtvMVLANIgmpLastMemberQueryIntervalIndicates the special query interval of query message in multicast VLAN.
When the value is -1, the query interval will be the global configuration.rw Integer32 (-1|1..50000) .1.3.6.1.4.1.2011.6.28.76.1.54 |
hwDslamNtvMVLANIgmpV2LastMemberQueryResponseIndicates the maximum response time for special query message in multicast VLAN,
whose version is IGMP v2.
When the value is -1, the max response time will be the global configuration.rw Integer32 (-1|1..255) .1.3.6.1.4.1.2011.6.28.76.1.55 |
hwDslamNtvMVLANIgmpV3LastMemberQueryResponseIndicates the maximum response time for special query message in multicast VLAN,
whose version is IGMP v3.
When the value is -1, the max response time will be the global configuration.rw Integer32 (-1|1..31744) .1.3.6.1.4.1.2011.6.28.76.1.56 |
hwDslamNtvMVLANIgmpLastMemberQueryCountIndicates the special query times of query message in multicast VLAN.
When the value is -1, the query times will be the global configuration.rw Integer32 (-1|1..10) .1.3.6.1.4.1.2011.6.28.76.1.57 |
hwDslamNtvMVLANIgmpV2RouterTimeroutIndicates the max timeout for igmp version 2.
When the value is -1, the max timeout will be the global configuration.rw Integer32 (-1|1..5000) .1.3.6.1.4.1.2011.6.28.76.1.58 |
hwDslamNtvMVLANIgmpInitialUnsolicitedReportIntervalIndicates the initial unsolicited report interval of user.
When the value is -1, the report interval will be the global configuration.rw Integer32 (-1|1..10) .1.3.6.1.4.1.2011.6.28.76.1.59 |
hwDslamNtvMVLANSnoopingQueryProxyEnables or disables the transmission of the query packet in the IGMP snooping mode.
Options:
1. enable(1) -enable the transmission of the query packet in the IGMP snooping mode.
2. disable(2) -disable the transmission of the query packet in the IGMP snooping mode.
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.60 |
hwDslamNtvMVLANGroupFilterModeIndicates the IGMP group filter mode.
Options:
1. asmOnly(1) -indicates that the group filter mode is asm-only.
2. ssmOnly(2) -indicates that the group filter mode is ssm-only.
3. asmSsm(3) -indicates that the group filter mode is asm-ssm.
Default: asmSsm(3)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.61 |
hwDslamNtvMVLANDualPwSwitchEnables or disables the dual-pw switch in multicast-vlan.
Options:
1. enable(1) -enable the dual-pw switch in multicast-vlan.
2. disable(2) -disable the dual-pw switch in multicast-vlan.
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.62 |
hwDslamNtvMVLANMldVerIndicates the MLD version.
Options:
1. mldV1(1) -indicates the MLD version is V1
2. mldV2(2) -indicates the MLD version is V2
Default: mldV2(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.63 |
hwDslamNtvMVLANMldUnsoliReportTimeIndicates the interval for a user to actively report MLD packets.
Range: 10-5000
Default: 10
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.64 |
hwDslamNtvMVLANMldPrioritySets the priority of MLD packets based on a multicast VLAN.
Range: 0-7
Default: 6rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.65 |
hwDslamNtvMVLANMldModeIndicates the MLD working mode.
Options:
1. mldProxy(1) -indicates the MLD working mode is mldProxy
2. mldSnooping(2) -indicates the MLD working mode is mldSnooping
3. tvOff(3) -indicates the MLD working mode is tvOff
Default: tvOff(3)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.66 |
hwDslamNtvMVLANMldMatchModeIndicates the program matching mode.
Options:
1. enable(1) -indicates the program matching mode is enabled
2. disable(2) -indicates the program matching mode is disabled
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.67 |
hwDslamNtvMVLANMldSnoopingReportSwitchEnables or disables the transmission of the report packet in the MLD snooping mode.
Options:
1. enable(1) -enable the transmission of the report packet in the MLD snooping mode
2. disable(2) -disable the transmission of the report packet in the MLD snooping mode
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.68 |
hwDslamNtvMVLANMldSnoopingLeaveSwitchEnables or disables the transmission of the leave packet in the MLD snooping mode.
Options:
1. enable(1) -enable the transmission of the leave packet in the MLD snooping mode
2. disable(2) -disable the transmission of the leave packet in the MLD snooping mode
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.76.1.69 |
hwDslamNtvMldQueryIntervalIndicates the MLD general query interval.
Range: 30-5000
Default: 125
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.70 |
hwDslamNtvMldV1QueryMaxResponseTimeIndicates the maximum response time for general query message in MLD v1.
Range: 1-655
Default: 100
Unit: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.71 |
hwDslamNtvMldV2QueryMaxResponseTimeIndicates the maximum response time for general query message in MLD v2.
Range: 1-50000
Default: 100
Unit: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.72 |
hwDslamNtvMldRobustnessIndicates the MLD robustness variable.
Range: 1-10
Default: 2rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.73 |
hwDslamNtvMVLANMldLastMemberQueryIntervalIndicates the MLD special query interval.
Range: 1-50000
Default: 10
Unit: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.74 |
hwDslamNtvMldV1LastMemberQueryResponseIndicates the maximum response time for special query message in MLD v1.
Range: 1-655
Default: 8
Unit: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.75 |
hwDslamNtvMldV2LastMemberQueryResponseIndicates the maximum response time for special query message in MLD v2.
Range: 1-50000
Default: 8
Unit: 0.1srw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.76 |
hwDslamNtvMVLANMldLastMemberQueryCountIndicates the MLD group-specific query times.
Range: 1-10
Default: 2rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.77 |
hwDslamNtvMldInitialUnsolicitedReportIntervalIndicates the initial unsolicited report interval of MLD.
Range: 1-10
Default: 1
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.78 |
hwDslamNtvMVLANIgmpDscpValueIndicates the DSCP value for IGMP package.
Range: 0-63
Default: 0rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.79 |
hwDslamNtvMVLANMldDscpValueIndicates the DSCP value for MLD package.
Range: 0-63
Default: 0rw Integer32 .1.3.6.1.4.1.2011.6.28.76.1.80 |
hwDslamNtvFlowBasedMulticastPolicyTableIndicates the flow-based suppression policy of unknown multicast streams and processing mode of IGMP packets.
The index of this table is hwDslamNtvFlowID. SEQUENCE OF HwDslamNtvFlowBasedMulticastPolicyEntry .1.3.6.1.4.1.2011.6.28.77 |
hwDslamNtvFlowBasedMulticastPolicyEntryIndicates the flow-based suppression policy of unknown multicast streams and processing mode of IGMP packets.
The index of this entry is hwDslamNtvFlowID. HwDslamNtvFlowBasedMulticastPolicyEntry .1.3.6.1.4.1.2011.6.28.77.1 |
hwDslamNtvFlowIDIndicates the service flow ID. Its value and algorithm are the same as those of hwExtSrvFlowIndex.rw Integer32 .1.3.6.1.4.1.2011.6.28.77.1.1 |
hwDslamNtvUnknownMulticastTrafficPolicyIndicates the suppression policy of unknown multicast streams.
Options:
1. transparent(2) -indicates the suppression policy of unknown multicast stream is transparent
2. discard(3) -indicates the suppression policy of unknown multicast stream is discard
For the switching-oriented service flow, it is discard(3) by default.
For the connection-oriented service flow, it is transparent(2) and does not support the set operation.
Default: discard(3)rw Enumeration .1.3.6.1.4.1.2011.6.28.77.1.2 |
hwDslamNtvIgmpPacketPolicyIndicates the processing mode of IGMP packets.
Options:
1. normal(1) -indicates the processing mode of IGMP packets is normal
2. transparent(2) -indicates the processing mode of IGMP packets is transparent
3. discard(3) -indicates the processing mode of IGMP packets is discard
Default: normal(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.77.1.3 |
hwDslamNtvV2RouterTimeroutSets/Queries the timeout time of router V2.
Range: 1-5000
Unit: second
Default: 400rw Integer32 .1.3.6.1.4.1.2011.6.28.78 |
hwDslamNtvMVlanMemberStatusTableIndicates the member relationship between the multicast VLAN and the multicast user.
The indexes of this table are hwDslamNtvMVLANIndex and hwDslamNtvUserIndex. SEQUENCE OF HwDslamNtvMVlanMemberStatusEntry .1.3.6.1.4.1.2011.6.28.80 |
hwDslamNtvMVlanMemberStatusEntryIndicates the member relationship between the multicast VLAN and the multicast user.
The indexes of this entry are hwDslamNtvMVLANIndex and hwDslamNtvUserIndex. HwDslamNtvMVlanMemberStatusEntry .1.3.6.1.4.1.2011.6.28.80.1 |
hwDslamNtvMVlanMemberStatusIndicates the member relationship between the multicast VLAN and the multicast user. Options:
1. enable(1) -indicates that the user is a member of the multicast VLAN.
2. disable(2) -indicates that the user is not a member of the multicast VLAN.rw Enumeration .1.3.6.1.4.1.2011.6.28.80.1.1 |
hwDslamNtvRouterInterAgingTimeThe aging time of router interface.
Default: 260srw Integer32 .1.3.6.1.4.1.2011.6.28.81 |
hwDslamNtvAllowToBeRouterInterTablePort table which allows to be router interface.
The index of this table is hwDslamNtvAllowToBeRouterInterIndex. SEQUENCE OF HwDslamNtvAllowToBeRouterInterEntry .1.3.6.1.4.1.2011.6.28.82 |
hwDslamNtvAllowToBeRouterInterEntryPort table which allows to be router interface.
The index of this entry is hwDslamNtvAllowToBeRouterInterIndex. HwDslamNtvAllowToBeRouterInterEntry .1.3.6.1.4.1.2011.6.28.82.1 |
hwDslamNtvAllowToBeRouterInterIndexPort index which allows to be router interface.ro Integer32 .1.3.6.1.4.1.2011.6.28.82.1.1 |
hwDslamNtvAllowToBeRouterInterRowStatusRow status.
Add or delete a table item.
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the adding operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.82.1.2 |
hwDslamNtvAllowToBeRouterInterFSPCombination of 'frame/slot/port' which allow to be router interface.
Using 32 bits to express 'frame/slot/port'. The frame and slot both occupied 8 bits,
and the port occupied 16 bits. For example, 0/3/7 can be expressed as 0x00 03 0007.rw Integer32 .1.3.6.1.4.1.2011.6.28.82.1.3 |
hwDslamNtvRouterInterTableThe table included the router interface learned currently.
The index of this table is hwDslamNtvRouterInterIndex. SEQUENCE OF HwDslamNtvRouterInterEntry .1.3.6.1.4.1.2011.6.28.83 |
hwDslamNtvRouterInterEntryThe table included the router interface learned currently.
The index of this entry is hwDslamNtvRouterInterIndex. HwDslamNtvRouterInterEntry .1.3.6.1.4.1.2011.6.28.83.1 |
hwDslamNtvRouterInterIndexRouter interface index. 256 is the max value of the index.ro Integer32 .1.3.6.1.4.1.2011.6.28.83.1.1 |
hwDslamNtvRouterInterFSPCombination of 'frame/slot/port', which is the router interface learned.
Using 32 bits to express 'frame/slot/port'. The frame and slot both occupied 8 bits,
and the port occupied 16 bits. For example, 0/3/7 can be expressed as 0x00030007 .ro Integer32 .1.3.6.1.4.1.2011.6.28.83.1.2 |
hwDslamNtvRouterInterVlanVlan of the router interfacero Integer32 .1.3.6.1.4.1.2011.6.28.83.1.3 |
hwDslamNtvRouterInterTimeoutThe remain time of the router interface before deleted.
After the system learned router interface, the router interface's aging timer is running.
When it is timeout two times, the router interface will be deleted.ro Integer32 .1.3.6.1.4.1.2011.6.28.83.1.4 |
hwDslamNtvRouterVersionThe IGMP Version of multicast router.
It is include V1/V2/V3 version.ro Integer32 .1.3.6.1.4.1.2011.6.28.83.1.5 |
hwDslamNtvVUpportTableIndicates the feature parameters of an upstream service port.
The index of this table is hwDslamNtvVUpportTblIndex. SEQUENCE OF HwDslamNtvVUpportEntry .1.3.6.1.4.1.2011.6.28.84 |
hwDslamNtvVUpportEntryIndicates the feature parameters of an upstream service port.
The index of this entry is hwDslamNtvVUpportTblIndex. HwDslamNtvVUpportEntry .1.3.6.1.4.1.2011.6.28.84.1 |
hwDslamNtvVUpportTblIndexIndicates the index of a multicast virtual upstream port.
Range: 1-1024
You can fill -1 and the system will automatically allocate an index.rw Integer32(-1|1..1024) .1.3.6.1.4.1.2011.6.28.84.1.1 |
hwDslamNtvVUpportTblRowStatusRow status, used to query, create, modify, and delete a multicast upstream port.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.84.1.2 |
hwDslamNtvVUpportTblInterIndicates the upstream port, a combination of shelf ID, slot ID, and port ID.
8 bits for the shelf ID, 8 bits for the slot ID, and 16 bits for the port ID,
forming an integer of 32 bits. The most significant 8 bits indicate the shelf ID,
the next 8 bits indicate the slot ID, and the last 16 bits indicate the port ID.rw Integer32 .1.3.6.1.4.1.2011.6.28.84.1.3 |
hwDslamNtvVUpportTblVlanIndicates the VLAN ID of an upstream port.
Range: 1-4093rw Integer32 .1.3.6.1.4.1.2011.6.28.84.1.4 |
hwDslamNtvVUpportTblRouterVersionIndicates the version of the multicast router connected to the upstream port.
Options:
1. igmpV2(2) -indicates the IGMP version is V2
2. igmpV3(3) -indicates the IGMP version is V3ro Enumeration .1.3.6.1.4.1.2011.6.28.84.1.5 |
hwDslamNtvVUpportTblMldRouterVersionIndicates the MLD version of the multicast router connected to the upstream port.
Options:
1. mldV1(1) -indicates the MLD version is V1
2. mldV2(2) -indicates the MLD version is V2ro Enumeration .1.3.6.1.4.1.2011.6.28.84.1.6 |
hwDslamNtvUserQueryTableQueries the index of a multicast user according to the stream parameters of the multicast user.
The indexes of this table are hwDslamNtvUserQueryIfIndex, hwDslamNtvUserQueryVpi, hwDslamNtvUserQueryVci,
hwDslamNtvUserQueryFlowType, hwDslamNtvUserQueryFlowPara, hwDslamNtvUserQueryMatchPara1 and
hwDslamNtvUserQueryMatchPara2. SEQUENCE OF HwDslamNtvUserQueryEntry .1.3.6.1.4.1.2011.6.28.85 |
hwDslamNtvUserQueryEntryQueries the index of a multicast user according to the stream parameters of the multicast user.
The indexes of this entry are hwDslamNtvUserQueryIfIndex, hwDslamNtvUserQueryVpi, hwDslamNtvUserQueryVci,
hwDslamNtvUserQueryFlowType, hwDslamNtvUserQueryFlowPara, hwDslamNtvUserQueryMatchPara1 and
hwDslamNtvUserQueryMatchPara2. HwDslamNtvUserQueryEntry .1.3.6.1.4.1.2011.6.28.85.1 |
hwDslamNtvUserQueryIfIndexIndicates the port index, corresponding to the shelf ID and slot ID of the port.
Its value and algorithm are the same as those of ifIndex. Integer32 .1.3.6.1.4.1.2011.6.28.85.1.1 |
hwDslamNtvUserQueryVpiIndicates the VPI of the PVC carrying IGMP packets. This leaf and the VCI leaf
together identify an xDSL user. The value range is determined by the xDSL line
specifications. Integer32 .1.3.6.1.4.1.2011.6.28.85.1.2 |
hwDslamNtvUserQueryVciIndicates the VCI of the PVC carrying IGMP packets. This leaf and the VPI leaf
together identify an xDSL user. The value range is determined by the xDSL line
specifications. Integer32 .1.3.6.1.4.1.2011.6.28.85.1.3 |
hwDslamNtvUserQueryFlowTypeIndicates the multi-service flow type.
Options:
1. byUserVlan(1) -indicates the multi-service flow type is byUserVlan
2. byEncap(2) -indicates the multi-service flow type is byEncap
3. by8021p(3) -indicates the multi-service flow type is by8021p
4. byVlanEtherType(4) -indicates the multi-service flow type is byVlanEtherType
5. singleFlow(-1) -indicates the multi-service flow type is singleFlow Enumeration .1.3.6.1.4.1.2011.6.28.85.1.4 |
hwDslamNtvUserQueryFlowParaSpecifies the parameter value of the flow type.
The parameter value varies with the flow type. In detail:
(1) singleFlow(-1). Fill -1 for a single service flow.
(2) byUserVlan(1). Range: 1-4095. For an untagged flow, the value is 0xFFFF.
(3) byEncap(2). Options: ipoe(1) and pppoe(2).
(4) by8021p. Range 0-7.
(5) by_vlan_ethertype. The flow parameter is a combination of the EtherType and the user VLAN.
The EtherType can be IPoE, PPPoE, and the user VLAN is in the range of 1-4095, 0 (priority-tagged),
and untagged. Integer32 .1.3.6.1.4.1.2011.6.28.85.1.5 |
hwDslamNtvUserQueryMatchPara1Indicates gemportid in the GPON distributed mode.
The range is determined by the line specifications.
Indicates ontid in the GPON profile mode and the EPON mode.
The range is determined by the line specifications.
VDSL port type, indicating PTM/ATM mode.
Options:
1. PTM(1) -indicates gemportid in the GPON distributed mode is PTM
2. ATM(2) -indicates gemportid in the GPON distributed mode is ATM Integer32 .1.3.6.1.4.1.2011.6.28.85.1.6 |
hwDslamNtvUserQueryMatchPara2Indicates gemindex of a GPON user in the GPON profile mode. This leaf is
currently not used for users in the GPON non-profile mode or other modes. Integer32 .1.3.6.1.4.1.2011.6.28.85.1.7 |
hwDslamNtvUserQueryIndexIndicates the index of a multicast user. Its value and usage are the same
as those of hwDslamNtvUserIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.85.1.8 |
hwDslamNtvUpstreamModeSets/Queries the interaction mode of the upstream port.
Options:
1. igmp(1) -indicates the interaction mode of the upstream port is igmp
2. pimSsm(2) -indicates the interaction mode of the upstream port is pimSsm
Default: igmp(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.86 |
hwDslamNtvUserExtendedAttributesTableIndicates the maximum count for a user to watch programs at various grades.
The index of this table is hwDslamNtvUserInnerIndex. SEQUENCE OF HwDslamNtvUserExtendedAttributesEntry .1.3.6.1.4.1.2011.6.28.87 |
hwDslamNtvUserExtendedAttributesEntryIndicates the maximum count for a user to watch programs at various grades.
The index of this entry is hwDslamNtvUserInnerIndex. HwDslamNtvUserExtendedAttributesEntry .1.3.6.1.4.1.2011.6.28.87.1 |
hwDslamNtvUserInnerIndexIndicates the user index.ro Integer32 .1.3.6.1.4.1.2011.6.28.87.1.1 |
hwDslamNtvUserHdtvWatchLimitIndicates the watch limit on the HDTV program.
Range: 0-32, 255
Default: 255 (the number of watched programs is not limited).rw Integer32 (0..32|255) .1.3.6.1.4.1.2011.6.28.87.1.2 |
hwDslamNtvUserSdtvWatchLimitIndicates the watch limit on the SDTV program.
Range: 0-32, 255
Default: 255 (the number of watched programs is not limited).rw Integer32 (0..32|255) .1.3.6.1.4.1.2011.6.28.87.1.3 |
hwDslamNtvUserStreamingVideoWatchLimitIndicates the watch limit on the streaming-video program.
Range: 0-32, 255
Default: 255 (the number of watched programs is not limited).rw Integer32 (0..32|255) .1.3.6.1.4.1.2011.6.28.87.1.4 |
hwDslamNtvVersionForceSwitchForce switch upplink-port version to IGMP V2.
TRUE(enable) means that upport-port version is force to V2,
FALSE(disable) means that upport-port version is auto-selected.
The default value is 'enable'.
Options:
1. true(1) -indicates the upport-port version is force to V2
2. false(2) -indicates the upport-port version is auto-selectedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.88 |
hwDslamNtvBandwidthCACTableSets the port bandwidth; queries the allocated and used bandwidth of a port.
The index of this table is hwDslamNtvBandwidthCACifIndex. SEQUENCE OF HwDslamNtvBandwidthCACEntry .1.3.6.1.4.1.2011.6.28.89 |
hwDslamNtvBandwidthCACEntrySets the port bandwidth; queries the allocated and used bandwidth of a port.
The index of this entry is hwDslamNtvBandwidthCACifIndex. HwDslamNtvBandwidthCACEntry .1.3.6.1.4.1.2011.6.28.89.1 |
hwDslamNtvBandwidthCACifIndexIndicates the port index, corresponding to the shelf ID and slot ID of the port.
The value and algorithm of this index are the same as those of the ifIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.89.1.1 |
hwDslamNtvAssignBandwidthIndicates the allocable port bandwidth.
If the bandwidth is not limited, the returned value for hwDslamNtvAssignBandwidth is -1.
Range: 0-2147483647, -1
Default: 716800
Unit: kbit/srw Integer32 .1.3.6.1.4.1.2011.6.28.89.1.2 |
hwDslamNtvUsedBandwidthIndicates the used bandwidth of the port.ro Integer32 .1.3.6.1.4.1.2011.6.28.89.1.3 |
hwDslamNtvAncpVideoBandwidthIndicates the total ANCP video bandwidth. When ANCP CAC is disabled,
the returned value for hwDslamNtvAncpVideoBandwidth is -1.
Unit: kbit/s.ro Integer32 .1.3.6.1.4.1.2011.6.28.89.1.4 |
hwDslamNtvAncpMcastBandwidthIndicates the ANCP multicast video bandwidth. When ANCP CAC is disabled,
the returned value for hwDslamNtvAncpMcastBandwidth is -1.
Unit: kbit/s.ro Integer32 .1.3.6.1.4.1.2011.6.28.89.1.5 |
hwDslamNtvMVlanIgmpStatTableIndicates the statistics of IGMP packets transmitted and received in a multicast VLAN.
The index of this table is hwDslamNtvMVlanIgmpStatMVlanIndex. SEQUENCE OF HwDslamNtvMVlanIgmpStatEntry .1.3.6.1.4.1.2011.6.28.90 |
hwDslamNtvMVlanIgmpStatEntryIndicates the statistics of IGMP packets transmitted and received in a multicast VLAN.
The index of this entry is hwDslamNtvMVlanIgmpStatMVlanIndex. HwDslamNtvMVlanIgmpStatEntry .1.3.6.1.4.1.2011.6.28.90.1 |
hwDslamNtvMVlanIgmpStatMVlanIndexIndicates the multicast VLAN index. Its value and algorithm are the same as those of hwDslamNtvMVLANIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.1 |
hwDslamNtvMVlanIgmpStatOperModeIndicates the operation mode. The set operation can clear statistics of IGMP packets.
Options:
1. clearStatistic(1) -indicates clearing statistics of multicast VLAN packets
2. invalid(-1) -indicates invalidrw Enumeration .1.3.6.1.4.1.2011.6.28.90.1.2 |
hwDslamNtvMVlanIgmpStatGenQueryRcvIndicates the number of general query packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.3 |
hwDslamNtvMVlanIgmpStatSpecQueryRcvIndicates the number of specific query packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.4 |
hwDslamNtvMVlanIgmpStatReportV2RcvIndicates the number of V2 report packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.5 |
hwDslamNtvMVlanIgmpStatErrV2ReportRcvIndicates the number of errored V2 report packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.6 |
hwDslamNtvMVlanIgmpStatReportV3RcvIndicates the number of V3 report packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.7 |
hwDslamNtvMVlanIgmpStatErrV3ReportRcvIndicates the number of errored V3 report packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.8 |
hwDslamNtvMVlanIgmpStatLeaveRcvIndicates the number of leave packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.9 |
hwDslamNtvMVlanIgmpStatGenQuerySndIndicates the number of general query packets transmitted by a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.10 |
hwDslamNtvMVlanIgmpStatSpecQuerySndIndicates the number of specific query packets transmitted by a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.11 |
hwDslamNtvMVlanIgmpStatReportV2SndIndicates the number of V2 report packets transmitted by a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.12 |
hwDslamNtvMVlanIgmpStatReportV3SndIndicates the number of V3 report packets transmitted by a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.13 |
hwDslamNtvMVlanIgmpStatLeaveSndIndicates the number of leave packets transmitted by a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.14 |
hwDslamNtvMVlanIgmpActiveProgramNumIndicates the number of online programs in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.15 |
hwDslamNtvMVlanIgmpActiveUserNumIndicates the number of online users in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.16 |
hwDslamNtvMVlanIgmpStatInvalidRcvIndicates the number of invalid packets received in a multicast VLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.17 |
hwDslamNtvMVlanIgmpStatJoinProgRcvUserIndicates the number of join programs from MVLAN users based on MVLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.18 |
hwDslamNtvMVlanIgmpStatLeaveProgRcvUserIndicates the number of leaving programs from MVLAN users based on MVLAN.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.19 |
hwDslamNtvMVlanIgmpStatGenQuerySndUserIndicates the number of general query packets transmitted by an MVLAN to MVLAN users.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.20 |
hwDslamNtvMVlanIgmpStatSpecQuerySndUserIndicates the number of specific query packets transmitted by an MVLAN to MVLAN users.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.21 |
hwDslamNtvMVlanIgmpStatInvalidRcvUserIndicates the number of invalid packets received in an MVLAN from MVLAN users.ro Integer32 .1.3.6.1.4.1.2011.6.28.90.1.22 |
hwDslamNtvMVlanIgmpStatV2JoinRcvdFromUserIndicates the number of V2 join programs received from users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.90.1.23 |
hwDslamNtvMVlanIgmpStatV3JoinRcvdFromUserIndicates the number of V3 join programs receiverd from users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.90.1.24 |
hwDslamNtvMVlanIgmpStatLeaveSentToNetworkIndicates the number of sent leaving programs to network in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.90.1.25 |
hwDslamNtvMVlanIgmpStatV3JoinSentToNetworkIndicates the number of sent V3 join programs to network in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.90.1.26 |
hwDslamNtvUserIgmpStatTableIndicates the statistics of IGMP packets transmitted and received by a multicast user.
The index of this table is hwDslamNtvUserIgmpStatUserIndex. SEQUENCE OF HwDslamNtvUserIgmpStatEntry .1.3.6.1.4.1.2011.6.28.91 |
hwDslamNtvUserIgmpStatEntryIndicates the statistics of IGMP packets transmitted and received by a multicast user.
The index of this entry is hwDslamNtvUserIgmpStatUserIndex. HwDslamNtvUserIgmpStatEntry .1.3.6.1.4.1.2011.6.28.91.1 |
hwDslamNtvUserIgmpStatUserIndexIndicates the index of a multicast user. Its value and algorithm are the same as those of hwDslamNtvUserIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.1 |
hwDslamNtvUserIgmpStatOperModeIndicates the operation mode. The set operation can clear statistics of user IGMP packets.
Options:
1. clearStatistic(1) -indicates clearing statistics of user packets
2. invalid(-1) -indicates invalid operation moderw Enumeration .1.3.6.1.4.1.2011.6.28.91.1.2 |
hwDslamNtvUserIgmpStatReportV1RcvIndicates the number of V1 report packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.3 |
hwDslamNtvUserIgmpStatErrV1ReportRcvIndicates the number of V1 report error packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.4 |
hwDslamNtvUserIgmpStatReportV2RcvIndicates the number of V2 report packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.5 |
hwDslamNtvUserIgmpStatErrV2ReportRcvIndicates the number of errored V2 report packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.6 |
hwDslamNtvUserIgmpStatReportV3RcvIndicates the number of V3 report packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.7 |
hwDslamNtvUserIgmpStatErrV3ReportRcvIndicates the number of errored V3 report packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.8 |
hwDslamNtvUserIgmpStatV2LeaveRcvIndicates the number of leave packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.9 |
hwDslamNtvUserIgmpStatGenQuerySndIndicates the number of general query packets transmitted by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.10 |
hwDslamNtvUserIgmpStatSpecQuerySndIndicates the number of group-specific query packets transmitted by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.11 |
hwDslamNtvUserIgmpStatInvalidRcvIndicates the number of invalid packets received by the multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.12 |
hwDslamNtvUserIgmpStatSuccJoinProgRcvIndicates the number of successful join programs based on multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.13 |
hwDslamNtvUserIgmpStatErrJoinProgRcvIndicates the number of unsuccessful join programs based on multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.14 |
hwDslamNtvUserIgmpStatLeaveProgRcvIndicates the number of leaving programs based on multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.91.1.15 |
hwDslamNtvIncrementalModifyRightProfileTableModifies the authority to programs in an authority profile incrementally or in batches;
queries the authority to programs in an authority profile.
The index of this table is hwDslamNtvRightProfileIndex. SEQUENCE OF HwDslamNtvIncrementalModifyRightProfileEntry .1.3.6.1.4.1.2011.6.28.92 |
hwDslamNtvIncrementalModifyRightProfileEntryModifies the authority to programs in an authority profile incrementally or in batches;
queries the authority to programs in an authority profile.
The index of this entry is hwDslamNtvRightProfileIndex. HwDslamNtvIncrementalModifyRightProfileEntry .1.3.6.1.4.1.2011.6.28.92.1 |
hwDslamNtvIncrementalModifyRightProfileMaskIndicates the program authority mask of an authority profile.
Range: 0-8192
hwDslamNtvIncrementalModifyRightProfileMask is the program authority mask of
an authority profile. To modify a certain number of programs, issue the
corresponding number of authority masks. Up to 4096 program masks can be issued.
Each program mast occupies two bytes. The meaning of byes is shown as follows.
The byte contents comply with the network byte sequence. Right(15,14): 00=idle,
01=watch, 10=preview, and 11=forbidden. The reserve field is 0. The range of
program index is 1-4096. If the issued masks contain repeated program authority (valid),
the last program authority takes effect.rw OCTET STRING .1.3.6.1.4.1.2011.6.28.92.1.1 |
hwDslamNtvIgmpVersionIndicates the IGMP version.
Options:
1. igmpV2(1) -indicates the IGMP version is V2
2. igmpV3(2) -indicates the IGMP version is V3
Default: igmpV2(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.93 |
hwDslamNtvIgmpPriorityIndicates the IGMP priority.
Range: 0-7
Default: 0rw Integer32 .1.3.6.1.4.1.2011.6.28.94 |
hwDslamNtvCdrSwitchIndicates the CDR global switch.
Options:
1. true(1) -indicates the CDR global switch is on
2. false(2) -indicates the CDR global switch is off
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.95 |
hwDslamNtvInitialUnsolicitedReportIntervalIndicates the interval for actively reporting initial IGMP join packets.
Range: 1-10
Default: 1
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.28.96 |
hwDslamNtvQueryModeThe mode to send query package to EPON user.
Options:
1. with-cvlan(1) -indicates the mode to send query package to EPON user is with-cvlan
2. with-mvlan(2) -indicates the mode to send query package to EPON user is with-mvlan
Default: 1rw Enumeration .1.3.6.1.4.1.2011.6.28.97 |
hwDslamNtvIgmpUpstreamVlanModeIndicates the VLAN mode carried in an IGMP upstream packet. Options:
1. mvlan(1) -indicates the VLAN mode that carried in an IGMP upstream packet is mvlan
2. svlan(2) -indicates the VLAN mode that carried in an IGMP upstream packet is svlan
3. vlan(3) -indicates the VLAN mode that carried in an IGMP upstream packet is vlan
Default: mvlan(1)
If hwDslamNtvIgmpUpstreamVlanMode is set to vlan(3),
it must be issued with global leaf hwDslamNtvIgmpUpstreamVlanPara.rw Enumeration .1.3.6.1.4.1.2011.6.28.98 |
hwDslamNtvIgmpUpstreamVlanParaIndicates the VLAN mode parameter VLAN ID carried in an IGMP upstream packet.
Range: 1-4093
This leaf is issued only when hwDslamNtvIgmpUpstreamVlanMode is set to vlan(3).
When hwDslamNtvIgmpUpstreamVlanMode is set to mvlan (1) or svlan(2), this leaf
need not be issued together. If this leaf is also issued, its value is omitted.
In the get operation, -1 is returned.rw Integer32 .1.3.6.1.4.1.2011.6.28.99 |
hwDslamNtvEnvironmentModeSwitchThe switch is offered to select a BTV environment between R3&R5.
'R3' indicate BTV running under non-mvlan-mode mode,
Otherwise the BTV running under mvlan-mode mode.
Options:
1. non-mvlan-mode(1) -indicates BTV running under non-mvlan-mode mode
2. mvlan-mode(2) -indicates BTV running under mvlan-mode mode
Default: 1rw Enumeration .1.3.6.1.4.1.2011.6.28.100 |
hwDslamNtvIgmpGlobalLeaveSendSwitchThe switch of Global-Leave sending.
Options:
1. enable(1) -indicates the switch of Global-leave sending is enabled
2. disable(2) -indicates the switch of Global-leave sending is disabled
Default: 1rw Enumeration .1.3.6.1.4.1.2011.6.28.101 |
hwDslamNtvForwardModeIndicates the forwarding control mode.
Options:
1. mvlan(1) -indicates the forwarding control mode is mvlan
2. globalIp(2) -indicates the forwarding control mode is globalIp
Default: mvlan(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.102 |
hwDslamNtvSendQueryToOfflineUserSwitchIndicates the switch of sending query packets to an offline user.
Options:
1. true(1) -indicates sending query packets to an offline user
2. false(2) -indicates not sending query packets to an offline user
Default: false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.103 |
hwDslamNtvUserStaticJoinTableIndicates all parameters of BTV emulation.
The index of this table is hwDslamNtvUserStaticJoinIndex. SEQUENCE OF HwDslamNtvUserStaticJoinEntry .1.3.6.1.4.1.2011.6.28.104 |
hwDslamNtvUserStaticJoinEntryIndicates all parameters of BTV emulation.
The index of this entry is hwDslamNtvUserStaticJoinIndex. HwDslamNtvUserStaticJoinEntry .1.3.6.1.4.1.2011.6.28.104.1 |
hwDslamNtvUserStaticJoinRowStatusRow status, used to query, create, modify, and delete a multicast emulation user.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
Options:
1. active(1) -indicates the query operation
2. createAndGo(4) -indicates the creating operation
3. destroy(6) -indicates the deleting operationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.104.1.1 |
hwDslamNtvUserStaticJoinIndexIndicates the BTV emulation index. Currently, only one emulation user is supported.
Always fill 1 for the index. You can also fill -1 and the system will automatically
allocate an index. Integer32 .1.3.6.1.4.1.2011.6.28.104.1.2 |
hwDslamNtvUserStaticJoinUserIndexIndicates the index of a multicast user, corresponding to hwDslamNtvUserIndexrw Integer32 .1.3.6.1.4.1.2011.6.28.104.1.3 |
hwDslamNtvUserStaticJoinIPAddrIndicates the IP address of an emulation program. It is the IP address of the multicast program.rw IpAddress .1.3.6.1.4.1.2011.6.28.104.1.4 |
hwDslamNtvUserStaticJoinVlanIndicates the emulation program VLAN.
Range: 1-4095rw Integer32 .1.3.6.1.4.1.2011.6.28.104.1.5 |
hwDslamNtvUserStaticJoinRateIndicates the emulation program traffic.
Unit: kbit/s.ro Integer32 .1.3.6.1.4.1.2011.6.28.104.1.6 |
hwDslamNtvUserStaticJoinResultIndicates the emulation result. Options:
1. inProgress(1) -started, but the final result is not obtained.
2. success(2) -demand a program successfully and receive the traffic
3. onlineWithoutTraffic(3) -the user demands a program normally but does not receive the traffic
4. unknownError(4) -demand failure caused by an exception
5. systemBusy(5) -the system is busy
6. noResources(6) -a lack of memory resources
7. userBlocked(7) -the user is blocked
8. cacFail(8) -user CAC check fails
9. authFail(9) -user authentication fails
10. previewFull(10) -the maximum preview count is reached
11. channelFull(11) -the maximum number of channels is reached
12. gradedChannelFull(12) -the number of channels at this grade reaches the maximumro Enumeration .1.3.6.1.4.1.2011.6.28.104.1.7 |
hwDslamNtvMcastVlanTagModeIndicates the multicast VLAN tag mode.
Options:
1. single(1) -indicates the multicast VLAN tag mode is single and tag transform is transparent.
2. dual(2) -indicates the multicast VLAN tag mode is dual and tag transform is remove.
3. singleTranslate(3) -indicates the multicast VLAN tag mode is single and tag transform is translate.
Default: single(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.105 |
hwDslamNtvUserFlowTableQueries the index of a corresponding multicast user according to the stream ID.
The index of this table is hwDslamNtvUserFlowIndex. SEQUENCE OF HwDslamNtvUserFlowEntry .1.3.6.1.4.1.2011.6.28.106 |
hwDslamNtvUserFlowEntryQueries the index of a corresponding multicast user according to the stream ID.
The index of this entry is hwDslamNtvUserFlowIndex. HwDslamNtvUserFlowEntry .1.3.6.1.4.1.2011.6.28.106.1 |
hwDslamNtvUserFlowIndexIndicates the flow ID of a multicast user.ro Integer32 .1.3.6.1.4.1.2011.6.28.106.1.1 |
hwDslamNtvUserFlowUserIndexIndicates the index of a multicast user, corresponding to hwDslamNtvUserIndex.ro Integer32 .1.3.6.1.4.1.2011.6.28.106.1.2 |
hwDslamNtvTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.28.107 |
hwDslamNtvMvlanMemberStateOperTypeIt indicates OperType.
Options:
1. add(1) -indicates the OperType is add
2. delete(2) -indicates the OperType is delete
3. block(3) -indicates the OperType is block
4. unblock(4) -indicates the OperType is unblock
5. modify(5) -indicates the OperType is modify
6. bonding(6) -indicates the OperType is bonding
7. unbonding(7) -indicates the OperType is unbondingro Enumeration .1.3.6.1.4.1.2011.6.28.107.1 |
hwDslamNtvFlowMulticastPolicyOperTypeIt indicates the opertype of unknown multicastpolicy and IGMP packet policy change.
Options:
1. modify(1) -indicates the opertype of unknown multicastpolicy and IGMP packet policy changero Enumeration .1.3.6.1.4.1.2011.6.28.107.2 |
hwDslamNtvUserStaticJoinRequestIDIt indicates the request ID of the NTV user static join trap.ro Integer32 .1.3.6.1.4.1.2011.6.28.107.3 |
hwDslamNtvUserChangeTypeIt indicates the NTV user change type.
Options:
1. addUser(1) -indicates the NTV user change type is addUser
2. deleteUser(2) -indicates the NTV user change type is deleteUser
3. blockUser(3) -indicates the NTV user change type is blockUser
4. unBlockUser(4) -indicates the NTV user change type is unBlockUser
5. modifyUser(5) -indicates the NTV user change type is modifyUser
6. bindProfileToUser(6) -indicates the NTV user change type is bindProfileToUser
7. unBindProfileToUser(7) -indicates the NTV user change type is unBindProfileToUserro Enumeration .1.3.6.1.4.1.2011.6.28.107.4 |
hwDslamNtvUserProfileBitMapThe bit map indicates the relationship between user and user profile index.ro OCTET STRING .1.3.6.1.4.1.2011.6.28.107.5 |
hwDslamNtvTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.28.108 |
hwDslamNtvCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.28.108.1 |
hwDslamNtvCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.28.108.1.0 |
hwDslamNtvMVLANMemberStateChangeTrapThe trap is generated when the relation of mvlan members and users changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.28.108.1.0.1 |
hwDslamNtvFlowMulticastPolicyChangeTrapThe trap is generated when the policy of unknown multicast based flow and IGMP packet changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.28.108.1.0.2 |
hwDslamNtvSmltStaticJoinTrapThe trap is generated when the user static join BTV simulation. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.28.108.1.0.3 |
hwDslamNtvUserChangeTrapThe trap is generated when the NTV user configuration changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.28.108.1.0.4 |
hwDslamNtvIgmpAcceleratorModeThe mode of multicast quickjoin. Options:
1. off(1) -disables the IGMP accelerator in the system.
2. svlan(2) -enables the IGMP accelerator in all service VLANs (SVLANs) in the system.
3. vlan(3) -enables the IGMP accelerator in a specified VLAN
Default: off(1).
If hwDslamNtvIgmpAcceleratorMode is set to vlan(3),
it must be issued with global leaf hwDslamNtvIgmpAcceleratorVlanPara.rw Enumeration .1.3.6.1.4.1.2011.6.28.109 |
hwDslamNtvIgmpAcceleratorVlanParaThe specified vlan value when hwDslamNtvIgmpAcceleratorMode is set to vlan(3).
Range: 1-4093,-1
This leaf is issued only when hwDslamNtvIgmpAcceleratorMode is set to vlan(3).
When hwDslamNtvIgmpAcceleratorMode is set to off(1) or svlan(2), this leaf
need not be issued together. If this leaf is also issued, its value is omitted.
In the get operation, -1 is returned.rw Integer32 (-1|1..4093) .1.3.6.1.4.1.2011.6.28.110 |
hwDslamNtvMVLANIPAddrRangeTableIndicates the range of IP address table.
The indexes of this table are hwDslamNtvVlanID and hwDslamNtvMVLANIPAddrRangeIndex. SEQUENCE OF HwDslamNtvMVLANIPAddrRangeEntry .1.3.6.1.4.1.2011.6.28.111 |
hwDslamNtvMVLANIPAddrRangeEntryIndicates the range of IP address table.
The indexes of this entry are hwDslamNtvVlanID and hwDslamNtvMVLANIPAddrRangeIndex. HwDslamNtvMVLANIPAddrRangeEntry .1.3.6.1.4.1.2011.6.28.111.1 |
hwDslamNtvMVLANIPAddrRangeIndexIndicates the index of IP address range.
Range: 1-16,-1
You can also fill -1 and the system will automatically allocate an index.ro Integer32 (-1|1..16) .1.3.6.1.4.1.2011.6.28.111.1.1 |
hwDslamNtvMVLANIPAddrRangeRowStatusRow status, used to query, create, and delete an IP address range.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.111.1.2 |
hwDslamNtvMVLANIPAddrRangeDynStartIPIndicates the start IP address of the programs that can be generated dynamically.rw IpAddress .1.3.6.1.4.1.2011.6.28.111.1.3 |
hwDslamNtvMVLANIPAddrRangeDynEndIPIndicates the end IP address of the programs that can be generated dynamically.rw IpAddress .1.3.6.1.4.1.2011.6.28.111.1.4 |
hwDslamNtvIgmpUserStatCurrTableQueries the igmp current 15 minutes statistic.
The index of this table is hwDslamNtvUserIndex. SEQUENCE OF HwDslamNtvIgmpUserStatCurrEntry .1.3.6.1.4.1.2011.6.28.112 |
hwDslamNtvIgmpUserStatCurrEntryQueries the igmp current 15 minutes statistic.
The index of this entry is hwDslamNtvUserIndex. HwDslamNtvIgmpUserStatCurrEntry .1.3.6.1.4.1.2011.6.28.112.1 |
hwDslamNtvIgmpUserCurr15MinJoinSuccessNumIndicates the success join number in current 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.112.1.1 |
hwDslamNtvIgmpUserCurr15MinJoinFailNumIndicates the fail join number in current 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.112.1.2 |
hwDslamNtvIgmpUserCurr15MinLeaveSuccessNumIndicates the success leave number in current 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.112.1.3 |
hwDslamNtvIgmpUserCurr15MinLeaveFailNumIndicates the fail leave number in current 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.112.1.4 |
hwDslamNtvIgmpUserCurr15MinInvalidPackNumIndicates the invalid igmp packet number in current 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.112.1.5 |
hwDslamNtvIgmpUserStatHistTableQueries the igmp history 15 minutes statistic.
The index of this table is hwDslamNtvUserIndex. SEQUENCE OF HwDslamNtvIgmpUserStatHistEntry .1.3.6.1.4.1.2011.6.28.113 |
hwDslamNtvIgmpUserStatHistEntryQueries the igmp history 15 minutes statistic.
The index of this entry is hwDslamNtvUserIndex. HwDslamNtvIgmpUserStatHistEntry .1.3.6.1.4.1.2011.6.28.113.1 |
hwDslamNtvIgmpUserHist15MinJoinSuccessNumIndicates the success join number in history 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.113.1.1 |
hwDslamNtvIgmpUserHist15MinJoinFailNumIndicates the fail join number in history 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.113.1.2 |
hwDslamNtvIgmpUserHist15MinLeaveSuccessNumIndicates the success leave number in history 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.113.1.3 |
hwDslamNtvIgmpUserHist15MinLeaveFailNumIndicates the fail leave number in history 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.113.1.4 |
hwDslamNtvIgmpUserHist15MinInvalidPackNumIndicates the invalid igmp packet number in current 15 minutes.ro Counter32 .1.3.6.1.4.1.2011.6.28.113.1.5 |
hwDslamNtvSourceIpAndGroupIpModeIndicates the Source IP and Group IP forward mode.
Options:
1. enable(1) -indicates the Source IP and Group IP forward mode is enable
2. disable(2) -indicates the Source IP and Group IP forward mode is disable
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.6.28.114 |
hwDslamNtvMldStatisticTableIndicates the various operations on MLD packet statistics.
The index of this table is hwDslamNtvMldStatisticTypeIndex. SEQUENCE OF HwDslamNtvMldStatisticEntry .1.3.6.1.4.1.2011.6.28.115 |
hwDslamNtvMldStatisticEntryIndicates the various operations on MLD packet statistics.
The index of this entry is hwDslamNtvMldStatisticTypeIndex. HwDslamNtvMldStatisticEntry .1.3.6.1.4.1.2011.6.28.115.1 |
hwDslamNtvMldStatisticTypeIndexIndicates the performance statistics type.
Options:
1. global MLD statistic(1) -indicates that the performance statistics type is global MLD statisticro Unsigned32 (1) .1.3.6.1.4.1.2011.6.28.115.1.1 |
hwDslamNtvMldStatisticOperModeIndicates the operation mode of performance statistics.
Options:
1. clearStatistic(1) -means to clear statistics
2. invalid(-1) -indicates invalid operation moderw Enumeration .1.3.6.1.4.1.2011.6.28.115.1.2 |
hwDslamNtvMldStatisticQueryV1RcvIndicates the number of received query packets of V1 from network.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.3 |
hwDslamNtvMldStatisticQueryV2RcvIndicates the number of received query packets of V2 from network.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.4 |
hwDslamNtvMldStatisticReportV1RcvIndicates the number of received report packets of V1 from users and cascades.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.5 |
hwDslamNtvMldStatisticReportV2RcvIndicates the number of received report packets of V2 from users and cascades.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.6 |
hwDslamNtvMldStatisticDoneV1RcvIndicates the number of received done packets of V1 from users and cascades.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.7 |
hwDslamNtvMldStatisticInvalidRcvIndicates the number of received invalid report packets.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.8 |
hwDslamNtvMldStatisticQueryV1SndIndicates the number of sent query packets of V1 to users and cascades.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.9 |
hwDslamNtvMldStatisticQueryV2SndIndicates the number of sent query packets of V2 to users and cascades.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.10 |
hwDslamNtvMldStatisticReportV1SndIndicates the number of sent report packets of V1 to network.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.11 |
hwDslamNtvMldStatisticReportV2SndIndicates the number of sent report packets of V2 to network.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.12 |
hwDslamNtvMldStatisticDoneV1SndIndicates the number of sent done packets of V1 to network.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.115.1.13 |
hwDslamNtvUserMldStatTableIndicates the statistics of MLD packets sent and received by a multicast user.
The index of this table is hwDslamNtvUserMldStatUserIndex. SEQUENCE OF HwDslamNtvUserMldStatEntry .1.3.6.1.4.1.2011.6.28.116 |
hwDslamNtvUserMldStatEntryIndicates the statistics of MLD packets sent and received by a multicast user.
The index of this entry is hwDslamNtvUserMldStatUserIndex. HwDslamNtvUserMldStatEntry .1.3.6.1.4.1.2011.6.28.116.1 |
hwDslamNtvUserMldStatUserIndexIndicates the index of a multicast user. Its value and algorithm are the same as those of hwDslamNtvUserIndex.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.116.1.1 |
hwDslamNtvUserMldStatOperModeIndicates the operation mode. The set operation can clear statistics of user MLD packets.
Options:
1. clearStatistic(1) -means to clear statistics of user packets
2. invalid(-1) -indicates invalid operation moderw Enumeration .1.3.6.1.4.1.2011.6.28.116.1.2 |
hwDslamNtvUserMldStatReportV1RcvIndicates the number of V1 report packets received by the multicast user.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.116.1.3 |
hwDslamNtvUserMldStatReportV2RcvIndicates the number of V2 report packets received by the multicast user.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.116.1.4 |
hwDslamNtvUserMldStatDoneV1RcvIndicates the number of V1 done packets received by the multicast user.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.116.1.5 |
hwDslamNtvUserMldStatInvalidRcvIndicates the number of invalid packets received by the multicast user.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.116.1.6 |
hwDslamNtvUserMldStatQuerySndIndicates the number of query packets sent by the multicast user.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.116.1.7 |
hwDslamNtvMVlanMldStatTableIndicates the statistics of MLD packets sent and received in a multicast VLAN.
The index of this table is hwDslamNtvMVlanMldStatMVlanIndex. SEQUENCE OF HwDslamNtvMVlanMldStatEntry .1.3.6.1.4.1.2011.6.28.117 |
hwDslamNtvMVlanMldStatEntryIndicates the statistics of MLD packets sent and received in a multicast VLAN.
The index of this entry is hwDslamNtvMVlanMldStatMVlanIndex. HwDslamNtvMVlanMldStatEntry .1.3.6.1.4.1.2011.6.28.117.1 |
hwDslamNtvMVlanMldStatMVlanIndexIndicates the multicast VLAN index. Its value and algorithm are the same as those of hwDslamNtvMVLANIndex.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.1 |
hwDslamNtvMVlanMldStatOperModeIndicates the operation mode. The set operation can clear statistics of MLD packets.
Options:
1. clearStatistic(1) -means to clear statistics of multicast VLAN packets
2. invalid(-1) -indicates invalidrw Enumeration .1.3.6.1.4.1.2011.6.28.117.1.2 |
hwDslamNtvMVlanMldStatQueryV1RcvIndicates the number of V1 query packets received from network in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.3 |
hwDslamNtvMVlanMldStatQueryV2RcvIndicates the number of V2 query packets received from network in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.4 |
hwDslamNtvMVlanMldStatReportV1RcvIndicates the number of V1 report packets received from cascades in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.5 |
hwDslamNtvMVlanMldStatReportV2RcvIndicates the number of V2 report packets received from cascades in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.6 |
hwDslamNtvMVlanMldStatDoneV1RcvIndicates the number of V1 done packets received from cascades in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.7 |
hwDslamNtvMVlanMldStatInvalidRcvIndicates the number of invalid packets received from network and cascades in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.8 |
hwDslamNtvMVlanMldStatQueryV1SndIndicates the number of V1 query packets sent to cascades in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.9 |
hwDslamNtvMVlanMldStatQueryV2SndIndicates the number of V2 query packets sent to cascades in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.10 |
hwDslamNtvMVlanMldStatReportV1SndIndicates the number of V1 report packets sent to network in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.11 |
hwDslamNtvMVlanMldStatReportV2SndIndicates the number of V2 report packets sent to network in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.12 |
hwDslamNtvMVlanMldStatDoneV1SndIndicates the number of V1 done packets sent to network in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.13 |
hwDslamNtvMVlanMldActiveProgramNumIndicates the number of online programs in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.14 |
hwDslamNtvMVlanMldActiveUserNumIndicates the number of online users in a multicast VLAN.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.117.1.15 |
hwDslamNtvMVlanMldStatGenQueryRcvdFromNetworkIndicates the number of received general query from network in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.16 |
hwDslamNtvMVlanMldStatSpecQueryRcvdFromNetworkIndicates the number of received specific query from network in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.17 |
hwDslamNtvMVlanMldStatV1JoinRcvdFromUserIndicates the number of V1 join programs received from users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.18 |
hwDslamNtvMVlanMldStatV2JoinRcvdFromUserIndicates the number of V2 join programs received from users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.19 |
hwDslamNtvMVlanMldStatLeaveRcvdFromUserIndicates the number of leaving programs received from users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.20 |
hwDslamNtvMVlanMldStatGenQuerySentToUserIndicates the number of general query sent to users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.21 |
hwDslamNtvMVlanMldStatSpecQuerySentToUserIndicates the number of specific query sent to users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.22 |
hwDslamNtvMVlanMldStatV2JoinSentToNetworkIndicates the number of V2 join programs sent to network in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.23 |
hwDslamNtvMVlanMldStatLeaveSentToNetworkIndicates the number of leaving programs sent to network in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.24 |
hwDslamNtvMVlanMldStatInvalidRcvdFromUserIndicates the number of invalid packets received from users in a multicast VLAN.ro Counter32 .1.3.6.1.4.1.2011.6.28.117.1.25 |
hwDslamNtvMVLANIPv6AddrRangeTableIndicates the range of IPv6 address table.
The indexes of this table are hwDslamNtvVlanID and hwDslamNtvMVLANIPv6AddrRangeIndex. SEQUENCE OF HwDslamNtvMVLANIPv6AddrRangeEntry .1.3.6.1.4.1.2011.6.28.118 |
hwDslamNtvMVLANIPv6AddrRangeEntryIndicates the range of IPv6 address table.
The indexes of this entry are hwDslamNtvVlanID and hwDslamNtvMVLANIPv6AddrRangeIndex. HwDslamNtvMVLANIPv6AddrRangeEntry .1.3.6.1.4.1.2011.6.28.118.1 |
hwDslamNtvMVLANIPv6AddrRangeIndexIndicates the index of IPv6 address range,
Range: 1-1,-1
You can also fill -1 and the system will automatically allocate an index.ro Integer32 (-1 | 1) .1.3.6.1.4.1.2011.6.28.118.1.1 |
hwDslamNtvMVLANIPv6AddrRangeRowStatusRow status, used to query, create, and delete an IPv6 address range.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.118.1.2 |
hwDslamNtvMVLANIPv6AddrRangeDynStartIPIndicates the start IPv6 address of the programs that can be generated dynamically.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.6.28.118.1.3 |
hwDslamNtvMVLANIPv6AddrRangeDynEndIPIndicates the end IPv6 address of the programs that can be generated dynamically.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.6.28.118.1.4 |
hwDslamNtvIgmpProcessPreferredIndicates the policy for processing the IGMP packets of the traffic stream.
Options:
1. igmpPolicy(1) -indicates that IGMP packets are processed based on IGMP policy configuration
2. igmpHost(2) -indicates that IGMP packets are processed based on IGMP host configuration
Default: igmpPolicy(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.119 |
hwDslamNtvBandwidthCalcModeIndicates multicast bandwidth calculation mode for BTV user CAC.
Options:
1. userDefinedBase(1) -indicates multicast bandwidth calculation is according to user-defined configulation of the BTV user
2. lineRateBase(2) -indicates multicast bandwidth calculation is according to the DSL line rate of the BTV user
Default: userDefinedBase(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.120 |
hwDslamNtvGlobalCfg OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.28.121 |
hwDslamNtvGlobalCfgPreviewRecognitionTimeIndicates the preview recognition time. If it is not configured (the value is -1), the preview recognition time is equal to the system recognition time.
Range: 1-120, -1
Default: -1
Unit: secondrw Integer32 (-1|1..120) UNITS "second" .1.3.6.1.4.1.2011.6.28.121.1 |
hwDslamNtvGlobalCfgLogRecognitionTimeIndicates the log recognition time. If it is not configured (the value is -1), the log recognition time is equal to the system recognition time.
Range: 1-120, -1
Default: -1
Unit: secondrw Integer32 (-1|1..120) UNITS "second" .1.3.6.1.4.1.2011.6.28.121.2 |
hwDslamNtvGlobalCfgIgmpSyslogIndicates the common multicast syslog switch.
Options:
1. enable(1) -indicates the syslog switch is on
2. disable(2) -indicates the syslog switch is off
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.121.3 |
hwDslamNtvGlobalCfgIgmpLogRecordIndicates the object for the IGMP local log and CDR record.
Options:
1. user(1) -indicates the record object is based on the IGMP user
2. mac(2) -indicates the record object is based on the terminal MAC address
Default: user(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.121.4 |
hwDslamNtvGlobalCfgIgmpRouterAlertToV2UserSpecify whether to carry the router alert option in the IGMPv2 packets sent to users.
Options:
1. enable(1) -send IGMPv2 packets that carry the router alert option to users
2. disable(2) -send IGMPv2 packets that do not carry the router alert option to users
Default: enable(1)rw Enumeration .1.3.6.1.4.1.2011.6.28.121.5 |
hwDslamNtvMcastVlanTagTransformUserVlanIf hwDslamNtvMcastVlanTagMode is singleTranslate, this value indicates that the user VLAN is translated.
If hwDslamNtvMcastVlanTagMode is single or dual, the returned value for hwDslamNtvMcastVlanTagMode is -1, which indicates the leaf does not take effect.rw Integer32 (-1|1..4095) .1.3.6.1.4.1.2011.6.28.121.6 |
hwDslamNtvMFSExtTableIndicates the multicast flow staticstics table.
The indexes of this table are hwDslamNtvMFSExtMVlanId, hwDslamNtvMFSExtAddrType,
hwDslamNtvMFSExtProgramIp and hwDslamNtvMFSExtSourceIp. SEQUENCE OF HwDslamNtvMFSExtEntry .1.3.6.1.4.1.2011.6.28.122 |
hwDslamNtvMFSExtEntryIndicates the multicast flow staticstics table.
The indexes of this entry are hwDslamNtvMFSExtMVlanId, hwDslamNtvMFSExtAddrType,
hwDslamNtvMFSExtProgramIp and hwDslamNtvMFSExtSourceIp. HwDslamNtvMFSExtEntry .1.3.6.1.4.1.2011.6.28.122.1 |
hwDslamNtvMFSExtMVlanIdIndicates the multicast VLAN ID,
Range: 1-4093,4097.
When this index is not required, the value 4097 must be input,
indicating that the index is unnecessary during the process of the MIB table. Integer32(1..4093|4097) .1.3.6.1.4.1.2011.6.28.122.1.1 |
hwDslamNtvMFSExtAddrTypeIndicates the address type.
Options:
1. IPv4(1) -indicates the address type is IPv4
2. IPv6(2) -indicates the address type is IPv6 InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.28.122.1.2 |
hwDslamNtvMFSExtProgramIpIndicates the group IP address of the program.
The format of this index is consistent with that of the address type. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.28.122.1.3 |
hwDslamNtvMFSExtSourceIpIndicates the source IP address of the program.
The format of this index is consistent with that of the address type.
When hwDslamNtvMFSExtSourceIp is not used as an index,
if the address type is IPv4,
input 255.255.255.255,
which means this index is unnecessary during the process of the MIB table;
if the address type is IPv6,
input FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF,
which means this index is unnecessary during the process of the MIB table.
Currently, the program source IP addresss cannot be used as an index for querying IPv6 multicast traffic.
Therefore, you can only input FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF, which means this index is invalid. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.28.122.1.4 |
hwDslamNtvMFSExtResultIndicates the multicast flow statistics results.
Unit: kbpsro Counter32 .1.3.6.1.4.1.2011.6.28.122.1.5 |
hwDslamNtvMVlanMembershipTableIndicates the member relationship between the multicast VLAN and the multicast user.
The indexes of this table are hwDslamNtvVlanID and hwDslamNtvUserIndex. SEQUENCE OF HwDslamNtvMVlanMembershipEntry .1.3.6.1.4.1.2011.6.28.124 |
hwDslamNtvMVlanMembershipEntryIndicates the member relationship between the multicast VLAN and the multicast user.
The indexes of this entry are hwDslamNtvVlanID and hwDslamNtvUserIndex. HwDslamNtvMVlanMembershipEntry .1.3.6.1.4.1.2011.6.28.124.1 |
hwDslamNtvMVlanMembershipStatusIndicates the member relationship between the multicast VLAN and the multicast user. Options:
1. enable(1) -indicates that the user is a member of the multicast VLAN.
2. disable(2) -indicates that the user is not a member of the multicast VLAN.rw Enumeration .1.3.6.1.4.1.2011.6.28.124.1.1 |
hwDslamNtvBoardStatisticTableIndicates the IPTV performance statistics of the specific board.
The indexes of this table are hwDslamNtvBoardStatisticFrameID and hwDslamNtvBoardStatisticSlotID. SEQUENCE OF HwDslamNtvBoardStatisticEntry .1.3.6.1.4.1.2011.6.28.125 |
hwDslamNtvBoardStatisticEntryIndicates the IPTV performance statistics of the specific board.
The indexes of this entry are hwDslamNtvBoardStatisticFrameID and hwDslamNtvBoardStatisticSlotID. HwDslamNtvBoardStatisticEntry .1.3.6.1.4.1.2011.6.28.125.1 |
hwDslamNtvBoardStatisticFrameIDIndicates the frame ID of the specific board. Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.1 |
hwDslamNtvBoardStatisticSlotIDIndicates the slot ID of the specific board. Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.2 |
hwDslamNtvBoardStatisticOperModeIndicates the operation mode of performance statistics.
Options:
1. clearStatistic(1) -indicates clearing statistics
2. invalid(-1) -indicates invalid operation moderw Enumeration .1.3.6.1.4.1.2011.6.28.125.1.3 |
hwDslamNtvReportsStatisticBoardInSecond1Indicates the number of report packets at the 4th second before the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.4 |
hwDslamNtvReportsStatisticBoardInSecond2Indicates the number of report packets at the 3rd second before the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.5 |
hwDslamNtvReportsStatisticBoardInSecond3Indicates the number of report packets at the 2nd second before the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.6 |
hwDslamNtvReportsStatisticBoardInSecond4Indicates the number of report packets at the 1st second before the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.7 |
hwDslamNtvReportsStatisticBoardInSecond5Indicates the number of report packets at the current second of the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.8 |
hwDslamNtvReportsStatisticBoardInSecond6Indicates the number of report packets at the 1st second after the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.9 |
hwDslamNtvReportsStatisticBoardInSecond7Indicates the number of report packets at the 2nd second after the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.10 |
hwDslamNtvReportsStatisticBoardInSecond8Indicates the number of report packets at the 3rd second after the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.11 |
hwDslamNtvReportsStatisticBoardInSecond9Indicates the number of report packets at the 4th second after the PIR.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.125.1.12 |
hwMulticastPortStatisticTableIndicates traffic statistics based on the port and the multicast group.
The index of this table is ifIndex. SEQUENCE OF HwMulticastPortStatisticEntry .1.3.6.1.4.1.2011.6.28.126 |
hwMulticastPortStatisticEntryIndicates traffic statistics based on the port and the multicast group.
The index of this entry is ifIndex. HwMulticastPortStatisticEntry .1.3.6.1.4.1.2011.6.28.126.1 |
hwMulticastPortStatisticRowStatusRow status, used to create and delete a task of query statistic
multicast flow.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the value of this leaf is always active(1).
During deletion, specify the value of this leaf to destroy(6).
During creation, specify the value of this leaf to createAndGo(4).
To modify the parameters of a statistic multicast task, this leaf need not be issued together.
Options:
1.active(1) - when this leaf is queried, the value is fixed to active(1)
2.createAndGo(4) -deliver a multicast channel traffic statistic to a specified port
3.destroy(6) -delete the multicast channel traffic statistic delivered to the specified port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.28.126.1.1 |
hwMulticastPortStatisticCountClearOptions:
1.cleared(1) -reset the multicast channel traffic statistic delivered to the specified port
2.invalid(-1) -in the query operation, this leaf is fixed to invalid(-1).rw Enumeration .1.3.6.1.4.1.2011.6.28.126.1.2 |
hwMulticastPortStatisticIpAddressTypeIndicates the address type, it is optional.
Options:
1. IPv4(1) -indicates the address type is IPv4
2. IPv6(2) -indicates the address type is IPv6rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.28.126.1.3 |
hwMulticastPortStatisticSourceIpAddrIndicates the Source IP address, it is optional.
The format of this index is consistent with that of the address type.
When hwMulticastPortStatisticSourceIpAddr is not used,
if the address type is IPv4, 255.255.255.255 means this IP address is invalid ;
if the address type is IPv6, FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF means this IP address is invalid.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.28.126.1.4 |
hwMulticastPortStatisticProgramIpAddrIndicates the Program IP address, it is necessary.
The format of this index is consistent with that of the address type.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.28.126.1.5 |
hwMulticastPortStatisticVlanIndicates the VLAN where the program resides.rw Integer32 .1.3.6.1.4.1.2011.6.28.126.1.6 |
hwMulticastPortStatisticTransmitPacketsIndicates the multicast flow statistics results.
Indicates the total transmitted packets.ro Counter64 .1.3.6.1.4.1.2011.6.28.126.1.7 |
hwMulticastPortStatisticTransmitBytesIndicates the multicast flow statistics results.
Indicates the total transmitted bytes.ro Counter64 .1.3.6.1.4.1.2011.6.28.126.1.8 |
hwMulticastPortStatisticTransmitRateIndicates the multicast flow statistics results.
Indicates the transmitted rate.
Unit:packets/sro Counter64 UNITS "pps" .1.3.6.1.4.1.2011.6.28.126.1.9 |
hwMulticastPortStatisticTransmitSpeedIndicates the multicast flow statistics results.
Indicates the transmitted speed.
Unit:kbit/sro Counter64 UNITS "kbps" .1.3.6.1.4.1.2011.6.28.126.1.10 |
hwDslamNtvChannelBandwidthCACTableSets the channel bandwidth; queries the allocated and used bandwidth of a channel.
The indexes of this table are ifIndex and hwDslamNtvChannelBandwidthCACChannelID. SEQUENCE OF HwDslamNtvChannelBandwidthCACEntry .1.3.6.1.4.1.2011.6.28.127 |
hwDslamNtvChannelBandwidthCACEntrySets the channel bandwidth; queries the allocated and used bandwidth of a channel.
The indexes of this entry are ifIndex and hwDslamNtvChannelBandwidthCACChannelID. HwDslamNtvChannelBandwidthCACEntry .1.3.6.1.4.1.2011.6.28.127.1 |
hwDslamNtvChannelBandwidthCACChannelIDIndicates the channel.
Options:
1. the1gChannel(1) -indicates the 1g channel
2. the10gChannel(2) -indicates the 10g channel Enumeration .1.3.6.1.4.1.2011.6.28.127.1.1 |
hwDslamNtvChannelAssignBandwidthIndicates the allocable channel bandwidth.
If the bandwidth is not limited, the returned value for hwDslamNtvChannelAssignBandwidth is 4294967295.
Unit: kbit/srw Unsigned32 .1.3.6.1.4.1.2011.6.28.127.1.2 |
hwDslamNtvChannelUsedBandwidthIndicates the used bandwidth of the channel.
Unit: kbit/sro Unsigned32 .1.3.6.1.4.1.2011.6.28.127.1.3 |
hwDslamNtvChannelAncpVideoBandwidthIndicates the total ANCP video bandwidth. When ANCP CAC is disabled or not supported,
the returned value for hwDslamNtvChannelAncpVideoBandwidth is 4294967295.
Unit: kbit/s.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.127.1.4 |
hwDslamNtvChannelAncpMcastBandwidthIndicates the ANCP multicast video bandwidth. When ANCP CAC is disabled or not supported,
the returned value for hwDslamNtvChannelAncpMcastBandwidth is 4294967295.
Unit: kbit/s.ro Unsigned32 .1.3.6.1.4.1.2011.6.28.127.1.5 |