HUAWEI-DHCPR-MIB
The HUAWEI-DHCPR-MIB enables monitoring and configuration of DHCP relay agents on Huawei network devices, specifically tracking relay IP address assignments, DHCP service allocation modes, and associated operational statistics.
Imported Objects
Objects
40 total| Object Name |
|---|
hwDHCPRelayMibThis MIB describes objects used for managing DHCP relay,
including configuring ip addresses for DHCP relay,
selecting allocation mode of dhcp service, and some statistic information. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.7.1 |
hwDHCPRelayMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.7.1.1 |
hwDHCPRIPTableA table for configuring ip addresses for DHCP relay,
The ip address means address of DHCP server. SEQUENCE OF HwDHCPRIPEntry .1.3.6.1.4.1.2011.5.7.1.1.1 |
hwDHCPRIPEntryAn entry for configuring ip addresses for DHCP
relay. HwDHCPRIPEntry .1.3.6.1.4.1.2011.5.7.1.1.1.1 |
hwDHCPRIPAddrIp address for DHCP relay, The ip address means address of DHCP server.ro IpAddress .1.3.6.1.4.1.2011.5.7.1.1.1.1.1 |
hwDHCPRIPRowStatusThis object is used to configuration new rows in this
table, modify existing rows, and to delete
existing rows.Only three actions are used: active(1),
createAndGo(4), destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.7.1.1.1.1.2 |
hwDHCPRSeletAllocateModeTableA table for selecting allocation mode of dhcp
service. SEQUENCE OF HwDHCPRSeletAllocateModeEntry .1.3.6.1.4.1.2011.5.7.1.1.2 |
hwDHCPRSeletAllocateModeEntryAn entry for configuring the allocation mode of
DHCP service. HwDHCPRSeletAllocateModeEntry .1.3.6.1.4.1.2011.5.7.1.1.2.1 |
hwDHCPRSelectAllocateModeAllocation mode of DHCP service.
global(0) - allocation address from global
interface(1)- allocation address from interface
relay(2) - allocation address from dhcp server, the request is relayed to server
none(3) - no allocation address mode
globalAndRelay(4) - allocation address from global and relay
interfaceAndRelay(5)- allocation address from interface and relay.rw Enumeration .1.3.6.1.4.1.2011.5.7.1.1.2.1.1 |
hwDHCPRelayCycleStatusStatus of DHCP relay cycle mode,
when the value is 0, cycle with the serveral DHCP servers addresses,
when the value is 1, use one same DHCP server.rw Enumeration .1.3.6.1.4.1.2011.5.7.1.1.3 |
hwDHCPRRxBadPktNumThe total number of the bad packets received by
DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.4 |
hwDHCPRRxServerPktNumThe total number of the packets received from
DHCP servers by DHCP relay module.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.5 |
hwDHCPRTxServerPktNumThe total number of the packets transmited to
DHCP servers by DHCP relay module.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.6 |
hwDHCPRRxClientPktNumThe total number of the packets received form DHCP
clients by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.7 |
hwDHCPRTxClientPktNumThe total number of the packets transmited
to DHCP clients by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.8 |
hwDHCPRTxClientUniPktNumThe total number of the unicast packets transmited
to DHCP clients by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.9 |
hwDHCPRTxClientBroPktNumThe total number of the brodcast packets transmited
to DHCP clients by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.10 |
hwDHCPRelayDiscoverPktNumThe total number of the DHCP Discover packets handled
by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.11 |
hwDHCPRelayRequestPktNumThe total number of the DHCP Request packets handled
by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.12 |
hwDHCPRelayDeclinePktNumThe total number of the DHCP Decline packets handled
by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.13 |
hwDHCPRelayReleasePktNumThe total number of the DHCP Release packets handled
by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.14 |
hwDHCPRelayInformPktNumThe total number of the DHCP Inform packets handled
by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.15 |
hwDHCPRelayOfferPktNumThe total number of the DHCP Offer packets handled
by DHCP server.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.16 |
hwDHCPRelayAckPktNumThe total number of the DHCP Ack packets handled
by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.17 |
hwDHCPRelayNakPktNumThe total number of the DHCP Nak packets handled
by DHCP relay.ro Integer32 .1.3.6.1.4.1.2011.5.7.1.1.18 |
hwDHCPRelayStatisticsResetReset the above statictics information of handled
packets by DHCP relay.
The value 1 means clear the statictics information.rw Enumeration .1.3.6.1.4.1.2011.5.7.1.1.19 |
hwDHCPArpProcessStatusARP process DHCP status.
The value 1 means enable ARP process DHCP status.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.7.1.1.20 |
hwDHCPRServerDetectStatusThis object indicates whether detection against the pseudo DHCP server is enabled.
The default value is disabled(2).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.7.1.1.21 |
hwDHCPRDSCPTableA table for configuring dhcp reply packet's Dscp value. SEQUENCE OF HwDHCPRDSCPEntry .1.3.6.1.4.1.2011.5.7.1.1.22 |
hwDHCPRDSCPEntryAn entry for configuring dhcp reply packet's Dscp value. HwDHCPRDSCPEntry .1.3.6.1.4.1.2011.5.7.1.1.22.1 |
hwDhcpDscpDhcp reply packet's dscp value.
<0-63> - Valid dscp value
<255> - Set dscp value to default.rw Integer32 (0..63|255) .1.3.6.1.4.1.2011.5.7.1.1.22.1.1 |
hwDhcpRenewReplyTableA table for configuring dhcp renew-reply packet local deal. SEQUENCE OF HwDhcpRenewReplyEntry .1.3.6.1.4.1.2011.5.7.1.1.23 |
hwDhcpRenewReplyEntryAn entry for configuring dhcp renw-reply packet local deal. HwDhcpRenewReplyEntry .1.3.6.1.4.1.2011.5.7.1.1.23.1 |
hwDhcpRenewReplyEnableWhether to enable dhcp renew-reply packet local-deal on this interfacerw Enumeration .1.3.6.1.4.1.2011.5.7.1.1.23.1.1 |
hwDhcpRenewReplyRowStatusThe dhcp renew-reply object is used to configuration new rows in this
table, modify existing rows, and to delete
existing rows.Only three actions are used: active(1),
createAndGo(4), destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.7.1.1.23.1.2 |
hwDHCP6RDUIDConfig Dhcpv6 Duid.rw OCTET STRING .1.3.6.1.4.1.2011.5.7.1.1.24 |
hwDHCPRelayReleaseLocalPktNumThe total number of the DHCP local release packets handled
by DHCP relay.ro Unsigned32 .1.3.6.1.4.1.2011.5.7.1.1.25 |
hwDHCPRelayMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.7.1.2 |
hwDHCPRelayMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.7.1.2.1 |
hwDHCPRelayMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.7.1.2.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.