HUAWEI-DATASYNC-MIB
AI MIB Summary
The HUAWEI-DATASYNC-MIB facilitates the monitoring and management of synchronization sessions between Huawei network devices and the NetManager system, tracking data transfer states and consistency metrics for host-to-netmanager replication.
The MIB module for Data sync between host and netmanager.
Main OID:
hwDataSync.1.3.6.1.4.1.2011.25.191
31
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
hwDataSyncThe MIB module for Data sync between host and netmanager. MODULE-IDENTITY .1.3.6.1.4.1.2011.25.191 |
hwDataSyncScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.191.1 |
hwCurrentCfgChgSeqIDThe value of this object identifies the ID of the current configuration change.
The value ranges from 0 to 65535. After the ID of the configuration change reaches
the maximum value, the value of the ID starts from 1 again.
After the device is restarted, the value of the ID becomes 0.ro Integer32 .1.3.6.1.4.1.2011.25.191.1.1 |
hwCfgChgSeqIDReveralCountThe value of this object identifies the cycle count of the index of configuration change table.ro Integer32 .1.3.6.1.4.1.2011.25.191.1.2 |
hwCfgChgTableMaxItemThe value of this object identifies the maximum number of entries in hwCfgChgTable.ro Integer32 .1.3.6.1.4.1.2011.25.191.1.3 |
hwCfgBaselineTimeSpecifies the time of system confiuration was baseline.ro DisplayString .1.3.6.1.4.1.2011.25.191.1.4 |
hwDataSyncTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.191.2 |
hwCfgChgTableThis table is used to record configuration changes.
In this table, you can find the configuration change based on the specific index. SEQUENCE OF HwCfgChgEntry .1.3.6.1.4.1.2011.25.191.2.1 |
hwCfgChgEntryEntry of hwCfgChgTable. HwCfgChgEntry .1.3.6.1.4.1.2011.25.191.2.1.1 |
hwCfgChgSeqIDThe value of this object identifies the configuration change ID.
When configuration is changed, the sequence id will plus 1.ro Integer32 .1.3.6.1.4.1.2011.25.191.2.1.1.1 |
hwCfgChgTimeThis object indicates the configuration change time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.25.191.2.1.1.2 |
hwCfgChgTerminalTypeThis object indicates the type of the terminal.ro Enumeration .1.3.6.1.4.1.2011.25.191.2.1.1.3 |
hwCfgChgTerminalIDThe value of this object identifies the terminal ID.ro Integer32 .1.3.6.1.4.1.2011.25.191.2.1.1.4 |
hwCfgChgTypeThis object indicates the configuration change type.ro Enumeration .1.3.6.1.4.1.2011.25.191.2.1.1.5 |
hwCfgChgViewNameThis object indicates the name of the view in which the configuration change occurs.
For the command operation, the object is the name of the view in which the command is run.
For the SNMP operation, the object is the OID of the MIB table or the scalar object.ro OCTET STRING .1.3.6.1.4.1.2011.25.191.2.1.1.6 |
hwCfgChgCmdIDThe value of this object identifies the ID of the configuration change command.
For the SNMP operation, the value is 0.ro Integer32 .1.3.6.1.4.1.2011.25.191.2.1.1.7 |
hwCfgChgDetailInfoThis object indicates detailed configuration change information.
For the command operation, the object is the command line.
For the SNMP operation, the object is the index of the MIB table.
When there are multiple indexes, the format of index1.index2.index3 is adopted.ro OCTET STRING .1.3.6.1.4.1.2011.25.191.2.1.1.8 |
hwCollectTableThis table is used to enable the NMS to send the collecting script to the device to trigger the collection,
and then monitor the collection status. SEQUENCE OF HwCollectEntry .1.3.6.1.4.1.2011.25.191.2.2 |
hwCollectEntryEntry of hwCollectTable. HwCollectEntry .1.3.6.1.4.1.2011.25.191.2.2.1 |
hwCollectIndexThe value of this object identifies the collection index. Integer32 .1.3.6.1.4.1.2011.25.191.2.2.1.1 |
hwCollectNetManageIdThe value of this object identifies the NMS ID.rw Integer32 .1.3.6.1.4.1.2011.25.191.2.2.1.2 |
hwCollectOperationThis object indicates the instruction for the collection operation.
Default value is stop.rw Enumeration .1.3.6.1.4.1.2011.25.191.2.2.1.3 |
hwCollectInScriptFileThis object indicates the name of the script file. T
he length of the file name ranges from 1 character to 255 characters.rw OCTET STRING .1.3.6.1.4.1.2011.25.191.2.2.1.4 |
hwCollectInResultFileThis object indicates the name of the result file.
The length of the file name ranges from 1 character to 255 characters.rw OCTET STRING .1.3.6.1.4.1.2011.25.191.2.2.1.5 |
hwCollectStateThis object indicates the collection status.ro Enumeration .1.3.6.1.4.1.2011.25.191.2.2.1.6 |
hwCollectRowStatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.25.191.2.2.1.7 |
hwDataSyncNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.191.3 |
hwCfgChgNotifyThis trap is generated when a configuration change occurs
on the device within a specified period. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.191.3.1 |
hwDataSyncConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.191.4 |
hwDataSyncGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.191.4.1 |
hwDataSyncCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.191.4.2 |